Why can't I figure out flashing? - Nexus 5X Q&A, Help & Troubleshooting

I don't know why this has been so difficult. I was going to flash a rom last night and it ended up being a little bit of a nightmare. Maybe I did it in the wrong order or something. I got Twrp 3.2.3-0, the most recent bliss rom for bullhead, magisk and open gapps nano. I used adb and the drivers and then I used a command prompt to do fastboot recovery installation. I did forget to move over the other files to the phone before I put recovery on the phone... maybe that was a mistake. I had an issue the first time it booted into recovery where it was asking for a password and the password i use on the phone didnt work. I couldn't figure this password out. Finally i found a fastboot command to wipe the cache and user and I was able to then able to boot back into the phone. I was just happy to be able to restore my phone from the google backup. So now I'm back with an unlocked phone with no twrp recover installed to it. Could you please let me know what I should do. I'm on the november update, bootloader BHZ32c and baseband m8994f and kernel version 3.10.73 (if any of that matters)
Thanks in advance for the help.

@Krazy_Calvin: I would flash latest Google december build by flashall.bat to get a clean base. Then open BL, flash TWRP and format internal storage (not wipe).

Ok. this time it worked as it should have. ... but if forgot to move over and flash magisk. is that going to cause a problem?

No problem. It's even better to flash customROM, boot and then flash Magisk.

Related

7.1.2 (NHG47L) causing device to boot loop

Hello Everyone I am hoping there is a solution to this however I have been unable to find anything.
I flashed the latest OTA image via sideload and everything was fine until I tried to install TWRP. When trying to install the latest TWRP I could find ( 3.1.0-0RC2 ) my phone would then boot loop. I tried this process several times and each time after installing my phone would boot loop for 10 minutes until I forced it into fastboot, fast booted the TWRP image, and finally sideload the OTA once again.
I have seen a couple threads which I believe indicate that May update changed/broke something with the bootloader but I will be honest I
haven't read into it much.
This is on a Google version of the device with the bootloader unlocked. (failed to mention that).
Thanks in advance.
Bijiont said:
Hello Everyone I am hoping there is a solution to this however I have been unable to find anything.
I flashed the latest OTA image via sideload and everything was fine until I tried to install TWRP. When trying to install the latest TWRP I could find ( 3.1.0-0RC2 ) my phone would then boot loop. I tried this process several times and each time after installing my phone would boot loop for 10 minutes until I forced it into fastboot, fast booted the TWRP image, and finally sideload the OTA once again.
I have seen a couple threads which I believe indicate that May update changed/broke something with the bootloader but I will be honest I
haven't read into it much.
This is on a Google version of the device with the bootloader unlocked. (failed to mention that).
Thanks in advance.
Click to expand...
Click to collapse
Please read the other Posts about this
Flash the bootloader from april.
****************************
Download last months 7.1.2 factory image.
Extract it and find "bootloader-marlin-xxxxblahblah.img".
Rename it to "bootloader.img" for simplicity's sake, then move it to the side.
:Flash-all" the latest factory image, after its done stay in fastboot.
Run "fastboot flash bootloader_a bootloader.img" from wherever you moved the file to
Disregard if "partition_a" isnt your primary, once the command is ran it will auto flash to the primary partition.
Boot and setup, reboot back to bootloader.
Boot and install twrp, then reboot to recovery.
Delete fstab.marlin in main directory, then flash preferred supersu (i use 2.79 sr3).
Reboot to system and your done. from here reboot to recovery or bootloader to flash your preferred kernel and mods.
Was able to get this all sorted out.
If anyone else happens to see this thread with the same issues and missed the April bootloader deal you can find a good overview Here
To get the April bootloader image which is something I have never loaded myself you need to download the Factory Image from April then extract it. Inside there you will see the bootloader image.
Hope this helps anyone else who didn't read far enough into this issue.

Tried flashing Lineage OS but ended up stuck in a boot loop.

I unlocked the bootloader following Motorolas steps. I then flashed the latest version of TWRP avaiable on the development forum and then flashed Lineage OS + the root zip they provide and gapps. I couldn't figure out how to get out of the bootloop so I've since gone back to stock. Any idea what I was missing?
TWRP:
https://forum.xda-developers.com/mo...recovery-unofficial-twrp-moto-z-play-t3495629
Lineage:
https://forum.xda-developers.com/moto-z-play/development/rom-unofficial-cyanogenmod-14-1-t3495644
Did you read the notices and entries on the Linage last pages of the thread that people are having it fail on the install, the latest release? That would be a clue...
I even tried flashing Pure Nexus but that too was stuck on a loop. I left it for about 10 minutes as it was loading. :/
I did the same thing like you on my first attempt, on my second I was able to install Lineage OS successfully. I'll provide the steps I did.
First attempt steps:
1. Unlocking the bootloader using Motorola website
2. Installing TWRP from the same link in your post.
At that point I tried booting the phone, but the phone was booting to TWRP only, tried wiping, format data from TWRP with no luck.
3. From TWRP flashed Lineage OS zip file and GAPPS nano package (the latest version of TWRP is able to see SD card).
At that point I was able to to boot LOS only after executing "fastboot erase user data". Doing the same from within TWRP was not doing the job. The problem was that after each reboot the phone was getting into bootloop again and "fastboot erase userdata" was necessary.
4. At that point I noticed that TWRP thread starts with warning that you have to install a patcher to disable this "verity" feature of the bootloader may be. And I installed the patcher "Verity_FE_patcher.zip"
The patcher didn't fix the issue and went back to stock Nougat using the guide below:
https://forum.xda-developers.com/moto-z-play/how-to/moto-z-play-reteu-firmware-otas-t3557917
First I tried "flashall.bat" , but it didn't wor.k and I flashed all the files manually using the guide . The phone booted normally and I updated it with one OTA update.
Second attempt steps:
1. I wanted to install the verity patcher before anything else and I boot TWRP 3.1.0.1 without flashing it. It booted normally and I realized that the SD card was formated and the patcher zip file is not there. I reboot the system and the phone got in bootloops again even the TWRP was not installed. I coppied the patcher zip, LOS zip, GAPPS zip on SD card . I tried to boot (without flashing) TWRP again, but for some reason TWRP was not able to boot.
2. I flashed TWRP
3. Booted TWRP and flashed verity patcher.
4. Wiped from TWRP and boot the system
At that point I was able to boot the stock firmware with TWRP installed and I was able to restart the phone normally.
5. Flashed LOS and nano GAPPS
Now everything seems to work properly.
Hope this will help.
Thanks. I'll give this a shot tonight. Our first attempts sound very alike.

Updating to Android O / Nandroid Restore back to Android N?

Used the search, used google, couldn't find any concrete answers
I am on Android N - unlocked bootloader - rooted via magisk, One Plus 3.
Could I do the following?
use TWRP to make a Nandroid Backup (System+Data+Boot) of my current set-up
then, manually flash (using twrp) Android O
find out I don't particularly like it
Go back to TWRP and Nandroid Restore back to Android N, as if no update ever happened
Or will there be issues?
Thanks
I do that with freedomos. 2.17(N)>3.1(O)>2.17. I restore nandroid and reflash rom
xGOGI said:
I do that with freedomos. 2.17(N)>3.1(O)>2.17. I restore nandroid and reflash rom
Click to expand...
Click to collapse
Should have mentioned I'm using stock rom.
So I'd restore the nandroid via twrp, and I should be good to go?
arthritis said:
Used the search, used google, couldn't find any concrete answers
I am on Android N - unlocked bootloader - rooted via magisk, One Plus 3.
Could I do the following?
use TWRP to make a Nandroid Backup (System+Data+Boot) of my current set-up
then, manually flash (using twrp) Android O
find out I don't particularly like it
Go back to TWRP and Nandroid Restore back to Android N, as if no update ever happened
Or will there be issues?
Thanks
Click to expand...
Click to collapse
There won't be any issue. You are alright with the procedure. Just make sure you use the correct twrp recovery for oreo coz if you use the non compatible recovery then you won't be able to boot into recovery once the oreo is flashed and you are forced to go with the stock recovery
Process I followed when I tried oreo last week
Take nandroid of all options available except system image. (system, data, bootloader, firmware, efs, etc.) on nougat twrp.
Do factory reset(wipe everything except internal storage) then flash oreo twrp image. Perform reboot. (no OS warning on reboot option screen will appear) just ignore it. It will boot to recovery even without the OS.
Once booted back to new recovery(oreo twrp)
Flash oreo stock zip and again flash oreo twrp image and reboot to recovery(this time the device will get stuck with a black screen and white LED). Don't panic, just force reboot the device and go to recovery again to flash magisk/supersu. Reboot to OS
Enjoy oreo
To go back to nougat
Reboot to recovery.
Perform factory reset as mentioned above.
Restore everything except bootloader, cache and dalvik cache
Flash nougat twrp recovery. Reboot to system.
Happy flashing.
Edit : use blu sparks recovery for nougat backup.
maxs8007 said:
There won't be any issue. You are alright with the procedure. Just make sure you use the correct twrp recovery for oreo coz if you use the non compatible recovery then you won't be able to boot into recovery once the oreo is flashed and you are forced to go with the stock recovery
Process I followed when I tried oreo last week
Take nandroid of all options available except system image. (system, data, bootloader, firmware, efs, etc.) on nougat twrp.
Do factory reset(wipe everything except internal storage) then flash oreo twrp image. Perform reboot. (no OS warning on reboot option screen will appear) just ignore it. It will boot to recovery even without the OS.
Once booted back to new recovery(oreo twrp)
Flash oreo stock zip and again flash oreo twrp image and reboot to recovery(this time the device will get stuck with a black screen and white LED). Don't panic, just force reboot the device and go to recovery again to flash magisk/supersu. Reboot to OS
Enjoy oreo
To go back to nougat
Reboot to recovery.
Perform factory reset as mentioned above.
Restore everything except bootloader, cache and dalvik cache
Flash nougat twrp recovery. Reboot to system.
Happy flashing.
Edit : use blu sparks recovery for nougat backup.
Click to expand...
Click to collapse
Thank you for the detailed procedure.
maxs8007 said:
There won't be any issue. You are alright with the procedure. Just make sure you use the correct twrp recovery for oreo coz if you use the non compatible recovery then you won't be able to boot into recovery once the oreo is flashed and you are forced to go with the stock recovery
Process I followed when I tried oreo last week
Take nandroid of all options available except system image. (system, data, bootloader, firmware, efs, etc.) on nougat twrp.
Do factory reset(wipe everything except internal storage) then flash oreo twrp image. Perform reboot. (no OS warning on reboot option screen will appear) just ignore it. It will boot to recovery even without the OS.
Once booted back to new recovery(oreo twrp)
Flash oreo stock zip and again flash oreo twrp image and reboot to recovery(this time the device will get stuck with a black screen and white LED). Don't panic, just force reboot the device and go to recovery again to flash magisk/supersu. Reboot to OS
Enjoy oreo
To go back to nougat
Reboot to recovery.
Perform factory reset as mentioned above.
Restore everything except bootloader, cache and dalvik cache
Flash nougat twrp recovery. Reboot to system.
Happy flashing.
Edit : use blu sparks recovery for nougat backup.
Click to expand...
Click to collapse
Thank you
Hi @maxs8007
thanks for the instructions. I did all that to get back to my nougat rom (PureFusion) and all seem good and phone booted fine. But i am stuck on login screen after booted up. I tried my correct password several times but to no avail. anyway reset my password without factory resetting again?
Thanks for the advise.
sqlpro said:
Hi @maxs8007
thanks for the instructions. I did all that to get back to my nougat rom (PureFusion) and all seem good and phone booted fine. But i am stuck on login screen after booted up. I tried my correct password several times but to no avail. anyway reset my password without factory resetting again?
Thanks for the advise.
Click to expand...
Click to collapse
Go to twrp - advanced - file manager - go to root folder - data - system - and delete files with .key extension. There will be 2 files delete both and reboot.
maxs8007 said:
Go to twrp - advanced - file manager - go to root folder - data - system - and delete files with .key extension. There will be 2 files delete both and reboot.
Click to expand...
Click to collapse
Thank you very much and that worked. I am back in the system.
BTW in your original instructions I had to re flash rom after restoring twrp backup otherwise it didn't boot and stuck at rom animation.
sqlpro said:
Thank you very much and that worked. I am back in the system.
BTW in your original instructions I had to re flash rom after restoring twrp backup otherwise it didn't boot and stuck at rom animation.
Click to expand...
Click to collapse
Thanks for pointing out, I must have forgot to add it. I'll update again.
Hi @maxs8007
I ran into this issue again today! after unlocking as per instructions yesterday and am back into phone and re-set the pin and all good. But today i had to reboot the phone and same issue again , cant login on the lock screen!! i tried deleting those files again but to no avail!!
any ideas before factory reset and loose my data ? Thanks.
sqlpro said:
Hi @maxs8007
I ran into this issue again today! after unlocking as per instructions yesterday and am back into phone and re-set the pin and all good. But today i had to reboot the phone and same issue again , cant login on the lock screen!! i tried deleting those files again but to no avail!
any ideas before factory reset and loose my data ? Thanks.
Click to expand...
Click to collapse
This should not have happened, anyways delete all those files which I've highlighted in the image below. This will reset the lock settings.
Oh sorry I forgot to attach the file. Here it is.
maxs8007 said:
There won't be any issue. You are alright with the procedure. Just make sure you use the correct twrp recovery for oreo coz if you use the non compatible recovery then you won't be able to boot into recovery once the oreo is flashed and you are forced to go with the stock recovery
Process I followed when I tried oreo last week
Take nandroid of all options available except system image. (system, data, bootloader, firmware, efs, etc.) on nougat twrp.
Do factory reset(wipe everything except internal storage) then flash oreo twrp image. Perform reboot. (no OS warning on reboot option screen will appear) just ignore it. It will boot to recovery even without the OS.
Once booted back to new recovery(oreo twrp)
Flash oreo stock zip and again flash oreo twrp image and reboot to recovery(this time the device will get stuck with a black screen and white LED). Don't panic, just force reboot the device and go to recovery again to flash magisk/supersu. Reboot to OS
Enjoy oreo
To go back to nougat
Reboot to recovery.
Perform factory reset as mentioned above.
Restore everything except bootloader, cache and dalvik cache
Flash nougat twrp recovery. Reboot to system.
Happy flashing.
Edit : use blu sparks recovery for nougat backup.
Click to expand...
Click to collapse
Hi, OP here. Thanks for this guide.
Unfortunately, it did not work out for me.
Take nandroid of all options available except system image. (system, data, bootloader, firmware, efs, etc.) on nougat twrp.
Done
Do factory reset(wipe everything except internal storage)
Wiped fine although I got an error of not being able to wipe 'USB-OTG' or whatever it's called. I ignored it and moved on.
then flash oreo twrp image.
I googled oreo twrp image and got an img file with filename "TWRP-Oreo-OnePlus-3-3T". When I installed the img, it asked the options to choose Boot, System, or Recovery - so I chose System.
Then I rebooted and went back to recovery.
Flash oreo stock zip
flash oreo twrp image
Done
reboot to recovery(this time the device will get stuck with a black screen and white LED). Don't panic, just force reboot the device and go to recovery again to flash magisk/supersu.
This is where it ends. I get stuck at the OnePlus loading screen and forced reboot into twrp and flashed magisk. Once I boot up the OS, I get stuck at the OnePlus logo and that's it.
I actually re-did ALL of the steps again (in case I made a mistake) and still, the same issue. No progression.
Once I gave up on Oreo, I decided to go restore my nandroid
Reboot to recovery. Perform factory reset as mentioned above.
Wiped
Restore everything except bootloader, cache and dalvik cache
Here's the issue:
I press Restore (I uncheck both bootloader and cache, but there's no option for a specific dalvik cache- unless I'm not looking hard enough?) and I get the 255 Error.
Flash nougat twrp recovery. Reboot to system.
I tried to ignore that error and flash the twrp recovery.
Rebooted and it took me to fastboot. Regardless of I keep trying to reboot system it won't work.
I actually made two separate nandroid backups (the same 'everything except system image' as you've described) in case one of the backups was corrupted. Both backups ended up with the same error.
I got too tired of all these errors and just found a stock recovery and ROM and flashed it back. Now, all my apps and settings are gone. To be honest, I just want my phone back to where it was with Nougat.
Can anyone assist me?
@maxs8007, Like I said I did that already but nope still same issue. It wouldn't let me do matter what I did.
---------- Post added at 04:59 AM ---------- Previous post was at 04:54 AM ----------
arthritis said:
Hi, OP here. Thanks for this guide.
Unfortunately, it did not work out for me.
Take nandroid of all options available except system image. (system, data, bootloader, firmware, efs, etc.) on nougat twrp.
Done
Do factory reset(wipe everything except internal storage)
Wiped fine although I got an error of not being able to wipe 'USB-OTG' or whatever it's called. I ignored it and moved on.
then flash oreo twrp image.
I googled oreo twrp image and got an img file with filename "TWRP-Oreo-OnePlus-3-3T". When I installed the img, it asked the options to choose Boot, System, or Recovery - so I chose System.
Then I rebooted and went back to recovery.
Flash oreo stock zip
flash oreo twrp image
Done
reboot to recovery(this time the device will get stuck with a black screen and white LED). Don't panic, just force reboot the device and go to recovery again to flash magisk/supersu.
This is where it ends. I get stuck at the OnePlus loading screen and forced reboot into twrp and flashed magisk. Once I boot up the OS, I get stuck at the OnePlus logo and that's it.
I actually re-did ALL of the steps again (in case I made a mistake) and still, the same issue. No progression.
Once I gave up on Oreo, I decided to go restore my nandroid
Reboot to recovery. Perform factory reset as mentioned above.
Wiped
Restore everything except bootloader, cache and dalvik cache
Here's the issue:
I press Restore (I uncheck both bootloader and cache, but there's no option for a specific dalvik cache- unless I'm not looking hard enough?) and I get the 255 Error.
Flash nougat twrp recovery. Reboot to system.
I tried to ignore that error and flash the twrp recovery.
Rebooted and it took me to fastboot. Regardless of I keep trying to reboot system it won't work.
I actually made two separate nandroid backups (the same 'everything except system image' as you've described) in case one of the backups was corrupted. Both backups ended up with the same error.
I got too tired of all these errors and just found a stock recovery and ROM and flashed it back. Now, all my apps and settings are gone. To be honest, I just want my phone back to where it was with Nougat.
Can anyone assist me?
Click to expand...
Click to collapse
Buddy from my experience the whole thing too finicky and am thinking just factory reset and stick with stock rom. I wasted so much time already. Everytime I get different error, probably recoveries still not fully compatible with Oreo.
sqlpro said:
@maxs8007, Like I said I did that already but nope still same issue. It wouldn't let me do matter what I did.
---------- Post added at 04:59 AM ---------- Previous post was at 04:54 AM ----------
Buddy from my experience the whole thing too finicky and am thinking just factory reset and stick with stock rom. I wasted so much time already. Everytime I get different error, probably recoveries still not fully compatible with Oreo.
Click to expand...
Click to collapse
Could you please tell me what error you get on the lock screen? Could you post an image so that I can get a better idea of what's happening with your device? Also could you please confirm which files have you deleted? This time you need to delete 5 files which are related to lock screen setting and those are the only files responsible for lock settings on the device. I'm somewhat confused because I never ran into such issue while I did the oreo thing
If you have decided to flash stock then just make a backup of data partition so that you won't loose your data and you can easily restore it via twrp.
---------- Post added at 01:06 AM ---------- Previous post was at 12:42 AM ----------
arthritis said:
I googled oreo twrp image and got an img file with filename "TWRP-Oreo-OnePlus-3-3T". When I installed the img, it asked the options to choose Boot, System, or Recovery - so I chose System.
Click to expand...
Click to collapse
I read the entire post and here what I've to say. The above quoted steps is where you went wrong. The recovery needs to to be flashed as a recovery and not as system.
In your case the nougat recovery was never replaced with the oreo recovery because you flashed it as a system. This is where it went wrong. Sorry for the dalvik cache and USB - otg, I didn't mentioned about them. Those are the least important points in flashing though I should have mentioned that already
The next thing you mentioned is you went back to recovery which at that moment was nougat recovery and not oreo recovery. I'll link the modded recovery I used for oreo below
The next thing you did is you flashed oreo zip and again flashed the oreo recovery but as you flashed the recovery as system, the oreo stock rom was automatically replaced with recovery because you flashed it as system and the device didn't boot because there was no android OS to boot up
You got stuck on oneplus boot up screen. (this was going to happen because of the same flashing error at your end).
You were unable to boot back to nougat as well because of the same issue.. Never flash the recovery as system. This won't let you boot the device.
To restore your nandroid backup just follow the steps below
As you confirmed you booted to stock rom with a stock recovery.
Flash nougat twrp via fastboot
Boot back to the twrp recovery and restore the nandroid backup and you are good to go
---------- Post added at 01:18 AM ---------- Previous post was at 01:06 AM ----------
I'll make a video in my free time to help you guys with the steps that I've followed to flash oreo rom and how i came back to nougat successfully.
Hello @maxs8007
Sorry I didn't have any screen shots of the prompt and finally I was fed up with the whole process and had to switch back to oreo stock rom.
Login prompt I was referring to was standard pin required load android. Black background with only pin entry.
BTW I tried blu twrp recovery oreo version and nougat version.
What's interesting is, after several failed attempts it said I got 10 more tries before phone wiped out but after 10 attempts it started counting backwards from zero, - 1,-2 etc., finally I had to flash stock recovery via fastboot and selected forgot password option which reset my phone.
BTW I have deleted all those files from data/system I found another thread but no dice.
Thank you for trying to help us all.
@maxs8007 followed your steps. Booted to oreo, didn't felt as stable as nougat then booted back to nougat. You saved me. Thanks.
sqlpro said:
Hello @maxs8007
Sorry I didn't have any screen shots of the prompt and finally I was fed up with the whole process and had to switch back to oreo stock rom.
Login prompt I was referring to was standard pin required load android. Black background with only pin entry.
BTW I tried blu twrp recovery oreo version and nougat version.
What's interesting is, after several failed attempts it said I got 10 more tries before phone wiped out but after 10 attempts it started counting backwards from zero, - 1,-2 etc., finally I had to flash stock recovery via fastboot and selected forgot password option which reset my phone.
BTW I have deleted all those files from data/system I found another thread but no dice.
Thank you for trying to help us all.
Click to expand...
Click to collapse
I'm sorry that I was unable to help you. The thing is I never used the pin prompt to load android because I reboot too often to flash things via recovery and its too much of a hassle to enter the pin everytime the device is booted and I think it's too much to a security for a android device when there's already a lock screen present once booted to secure the device.
Please don't put the pin entry to load android next time if you flash stuff regularly. It will save you the hassle of going back to stock rom and recovery when something like this ever happens again. The files which I told you to delete in the image I posted above remove the lock screen protection completely
The login pin at the boot to load android was implemented to avoid unauthorized access to the device in case it gets stolen or lost.
maxs8007 said:
I'm sorry that I was unable to help you. The thing is I never used the pin prompt to load android because I reboot too often to flash things via recovery and its too much of a hassle to enter the pin everytime the device is booted and I think it's too much to a security for a android device when there's already a lock screen present once booted to secure the device.
Please don't put the pin entry to load android next time if you flash stuff regularly. It will save you the hassle of going back to stock rom and recovery when something like this ever happens again. The files which I told you to delete in the image I posted above remove the lock screen protection completely
The login pin at the boot to load android was implemented to avoid unauthorized access to the device in case it gets stolen or lost.
Click to expand...
Click to collapse
Frankly no clue why deleting those files didn't reset my pins and I even deleted gatekeeper files too.
Maybe these are lock screen key files and android boot prompt stored somewhere else. Not sure though.

[Q] Bootloop, then worked, now stuck at boot

I'm desperate.
I've spent about 8 hours yesterday researching and fixing my phone which was stuck in a bootloop, I couldn't even get to TWRP.
In the end, what did it was the BLOD fix here in the forums. Flashed boot.img from stock 47Z, special TWRP from same thread and then from TWRP the EX kernel version 4.12 and then the latest OmniRom which I have used before. There it was again, working, even my 90 browser tabs were still there.
This is where I f***** up. My phone notified me at startup that I should flash vendor N2G47F (which is 7.1.2. - the latest OmniRom). Alright, phone is completely working, but still, couldn't hurt. Downloaded and flashed the wrong vendor (Factory Image 8.1.0) via TWRP because it was 3am and I didn't think anymore. And then... stuck at boot screen.
Alright, I discovered it was the wrong vendor image, so let's just flash the vendor again with the right version this time and it should work again, right?
Nope. Phone changed between bootloop-ing and just stuck on the Google loading screen with the open lock.
Okay, just start again from the beginning, you know what you did, so, easy. I thought.
This is what I did:
fastboot flash vendor vendorOPM7.1.2.-N2G47F.img
fastboot flash boot 47z…img [boot-img from BLOD-thread]
fastboot flash recovery twrp3_1_1_5X.img [also from BLOD-thread]
reboot-recovery
adb sideload 5xEX4…zip [also from BLOD-thread]
adb sideload omnirom_latest.zip [latest omnirom from official site]
reboot, should work because I fixed basically everything, right?
doesnt
remembered seeing boot.img getting flashed when sideloading omnirom (in the log that TWRP shows when sideloading)
flash boot.img again [from BLOD-thread]
still doesn't work.
cache was wiped either in twrp or fastboot after nearly every step.
I can't figure out anymore what the problem is. It worked before, and just because I flashed a false vendor it's not working at all anymore? I don't get it. Do you have any ideas for me? Many thanks in advance...

twrp help

I've gone through the posts trying to find an answer. seems like people are having similar issues, but either not exactly the same or no solution found.
I have flashed to stock 7.1.2 ( i know its old, but i want back button kill function). I can use the twrp image to fastboot into it. But when i try to flash the twrp zip (ive tried from 3.1-current), i get the encryption issue. I tried doing this with security passcode set and also with it turned off. same result.
And when twrp is encrypted, i can no longer boot into system. If i try to, it just boots back into twrp (which remains encrypted). I then have to use fastboot and twrp.img to open an unencrypted twrp. From there I can at least boot into android. But i lose root.
Could i potentially use fastboot to get into twrp, flash magisk and xposed and it would work? Yes, i wouldnt be able to boot into twrp without fastboot. But at this point im just trying to get things working any way i can.
Was going to try custom rom but when i tried to flash RR i couldnt get past the boot screen (left it going for at least 20-30 min before forcing a reboot).
Since I cant even get twrp to stick. dont want to go trying to flash roms.
cnoevl21 said:
Could i potentially use fastboot to get into twrp, flash magisk and xposed and it would work?.
Click to expand...
Click to collapse
yes, this should work. it's what i do. i fastboot boot the twrp image and then flash magisk. i don't used xposed and i don't flash the twrp zip anymore. if i need to use twrp, i'll just fastboot boot it.

Categories

Resources