Develop Bugs

[EOL] Get PIXEL FEATURES

GOOGLE PIXEL APPS and FEATURES
on LENOVO A6000/Plus and all other devices having Marshmallow or Nougat ROMs, can now be obtained by updating ××> Google Play Services <×× and ××> Google App <×× to their latest version.​
Also, choose English US as the default language and you might need to sign up for play services and google app beta. You don't need to read any further, but no-one's gonna stop you if you want to waste your time.
=======================================
First of all, I DIDNT'T MAKE ANY OF THESE APPS OR MODS MYSELF. I JUST DOWNLOADED AND TESTED THEM ON MY DEVICE. ALL THE CREDIT GOES TO THEIR RESPECTIVE DEVS ONLY AND I DON'T TAKE ANY CREDIT IN THIS. All I did is to compile this in this single thread.
If you follow all the steps correctly, nothing is gonna go wrong. But, in case, anything bad happens "I" should not be held responsible for that.
----REQUIREMENTS----​Min. Android Marshmallow 6.0 is required to get these features. Also on Android 6.0 you need to have Xposed installed with XPOSED GOOGLE ASSISTANT ENABLER module Find it here. This is not required on Android 7.0+
Also, make sure that your Google Apps have been updated to the latest version.
----DOWNLOADS----​
I've uploaded all the following APKs and ZIPs to my Google Drive, so that you don't have to go searching all the links. All these are latest as of Dec 2nd but if you are, for instance, checking this page after a long time then its better for you to download each app separately, as I have included the links to the play store of these apps (which I could found).​
---Download All Files From Here---
1. --Minimal--
1.1 Google Pixel BooT Logo (for A6000/Plus only)
1.2 Google Pixel Bootanimation
1.3 Google Pixel Wallpapers
1.4 Pixel Launcher
1.5 Google Pixel Navigation Bar (only for 7.0/+)
1.5.1 Substratum Theme Engine
1.5.2 Substratum N NavBar
1.6 Google Assistant
1.6.1 Google app
1.6.2 Velvet
1.6.3 ChopAssistant
1.6.4 BuilProp editor (Optional)
2. ---Add-Ons---
2.1 Google Pixel Camera. If this version doesn't work for you then you can try other variants as per your architecture FROM HERE.
2.2 Google Pixel Dialer
2.3 Google Pixel UI Sounds and Notification Tones
2.4 Nova Launcher Prime (please buy premium version to support devs). Here's how to mod NOVA to look like Pixel Launcher
2.5 Pixel Icon Pack (for nova launcher)
----Steps to follow:----​
First Download the Minimal pack and/or Add-Ons, as per your requirement.
Now, the first thing you should do, straight away, is to flash the boot logo and boot animation, through recovery.
Then, install Pixel Launcher and the look is somewhat now has been changed to Nougat. Also, install the Wallpapers app by Google to apply the Pixel Wallpapers.
Now, if you want to have those filled icons in the navigation bar, you have to now install Substratum Theme Engine (works only on CM14+) and N NavBar theme. Now, just open the Substratum app and tick at the appropriate options and click on the roller icon to reboot.
Next you would want to do setup the Google Assistant, for which you have took all this pains. So, install the latest Google App and the ChopAssistant (this app is used to "chop" the teach your assistant message that appears everytime and ruins the whole "ok google" thing).
Now, just don't start playing with your "personal" assistant. First you have to tweak a few things. First of all, go to /system/priv-app directory and create a new folder "Velvet". Now paste the "Velvet.apk" (yes, rename the velvet app like this first "exactly") in it and set its permissions to rw- r- r-
(If you have any problem with above step, I can make a flashable zip, for that)
Now, you can use BuilProp Editor for this or any root explorer app. Go to /system/ and open and edit build.prop like this.
Search for:
Code:
ro.product.model=xxx
if you find it, rename it as follows or ,if not found, add this line
Code:
ro.product.model=Pixel XL
Also, add this line too at the end of build.prop
Code:
ro.opa.eligible_device=true
Now, all you gotta do is to reboot the phone. If still, Assistant doesnt't work. Wipe the data of Google App by going in settings. Also, give it the permission to use the microphone. Also, go to settings>>Buttons>>Home long press action and choose search assistant.
Now, it should be working. If not, check this whole step 5 again.
So, that's pretty much everything. But, if you want to get a mile ahead then you can flash the Pixel Dialer and Pixel Sounds zip. Also, you can install the Google Pixel Camera. And, if you are still not satisfied then you can edit the framework-res files to add the animated navigation bar. You'll find the tutorial everywhere on the internet. And, for round pixel icons, install nova launcher, tweak it to give you a complete Pixel look.
I wanted this thread so that anyone could follow. And, I think anyone with the knowledge of rooting and flashing can perform the above steps.
So, thanks guys for reading all through this.
If you, in any way, liked my work. Please hit the thumbs up button.
----Screenshots----
Actually, I did this on my MOTO E2 and Im adding the ss from Moto E2 for your reference. The above tutorial is totally compatible with A6000 and moreover to most of the devices.​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse

Reserved

Alternative
Great...
I have question about google pixel nav. It uses subtratum theme engine right?. I read substratum theme engine at google play. It says "Substratum does NOT work with ROMs using the CM theme engine".
So, I think it will not work on all MM ROM which still use CM Theme engine right? CMIIW
I've tried Android N-ify (Xposed module) and it works too. I think you can add it as alternative on your thread.
As alternative for launcher, you can use Action Launcher 3. Now it support pixel style and it has a lot of customisation (alert!!! only pro version)

Mr. AW said:
Substratum does NOT work with ROMs using the CM theme engine
I've tried Android N-ify (Xposed module) and it works too. I think you can add it as alternative on your thread.
As alternative for launcher, you can use Action Launcher 3. Now it support pixel style and it has a lot of customisation (alert!!! only pro version)
Click to expand...
Click to collapse
Okay I'll check it.
The android n-ify would enable anyone having lollipop and above to get the Nougat look (notification and quick toggles, etc.).
So, I would add steps so that anyone with even older android versions can use it. Actually, I wrote this tutorial for devices running Nougat.
Also, I looked into Action Launcher and its too much complicated. Why would anyone mod it if they can do the same with Nova. Yeah, i tweaked nova and was able to get same look (atleast 95%) as Pixel Launcher. The only plus point to use any other launcher than Pixel Launcher itself would be you can use your favourite nova with the Nougat icons.

sasukay said:
Okay I'll check it.
The android n-ify would enable anyone having lollipop and above to get the Nougat look (notification and quick toggles, etc.).
So, I would add steps so that anyone with even older android versions can use it. Actually, I wrote this tutorial for devices running Nougat.
Also, I looked into Action Launcher and its too much complicated. Why would anyone mod it if they can do the same with Nova. Yeah, i tweaked nova and was able to get same look (atleast 95%) as Pixel Launcher. The only plus point to use any other launcher than Pixel Launcher itself would be you can use your favourite nova with the Nougat icons.
Click to expand...
Click to collapse
ahh, I see, sorry I misunderstood with your thread. your requirement state that "Min. Android Marshmallow 6.0 is required for Pixel Launcher to work.", so I think this thread for MM too (not include google assistant functionality).
thanks btw and keep it up :good:

Mr. AW said:
ahh, I see, sorry I misunderstood with your thread. your requirement state that "Min. Android Marshmallow 6.0 is required for Pixel Launcher to work.", so I think this thread for MM too (not include google assistant functionality).
thanks btw and keep it up :good:
Click to expand...
Click to collapse
Bro, Pixel launcher is for android 6.0 too but the gassistant will work only on 7.0+

sasukay said:
Okay I'll check it.
The android n-ify would enable anyone having lollipop and above to get the Nougat look (notification and quick toggles, etc.).
So, I would add steps so that anyone with even older android versions can use it. Actually, I wrote this tutorial for devices running Nougat.
Also, I looked into Action Launcher and its too much complicated. Why would anyone mod it if they can do the same with Nova. Yeah, i tweaked nova and was able to get same look (atleast 95%) as Pixel Launcher. The only plus point to use any other launcher than Pixel Launcher itself would be you can use your favourite nova with the Nougat icons.
Click to expand...
Click to collapse
Can u plz send me ur whats app no.

sasukay said:
Bro, Pixel launcher is for android 6.0 too but the gassistant will work only on 7.0+
Click to expand...
Click to collapse
With android n-ify or xposed google assistant enabler we can get google assistant in 6.x

IceBreakr said:
With android n-ify or xposed google assistant enabler we can get google assistant in 6.x
Click to expand...
Click to collapse
Thanks for the info man...! This is awesome. I'll add the link in the OP.
But, have you tried it yourselves..?

sasukay said:
Thanks for the info man...! This is awesome. I'll add the link in the OP.
But, have you tried it yourselves..?
Click to expand...
Click to collapse
Yes. It works as long as you have the google app version 6.6.14.21

Camera app file is corrupt change the link

rajat224 said:
Camera app file is corrupt change the link
Click to expand...
Click to collapse
No, that works for me and for most of the users. If it didn't work for you try another version as per your architecture FROM HERE

Camera app keeps crashing

Hii, I have tried 5th step for more than 10 times but i am not able to launch google assistant.
Everytime i wipe data, and reboot and launches gsearch, it opens previous version.

drdash said:
Hii, I have tried 5th step for more than 10 times but i am not able to launch google assistant.
Everytime i wipe data, and reboot and launches gsearch, it opens previous version.
Click to expand...
Click to collapse
You can wait for a few more days since Google has now enabled Google Assistant by default for Marshmallow and new Android versions. You can use Google assistant after updating Play Services and other all related gapps to their latest version., In a few days.

Just install nougat rom and aroma opengapps, i can pixelify my device. Aroma opengapps gives me an option to enable any google apps what i want and sure, google Assistant. It will be enable by default without change build.prop manually, and aroma open gapps has an addon.d script, so the google AI will be backed up automatically althought you update your rom. Now, i have google AI on my device running official LinOS 14.1.

Gcam works nice

[ROM][G928PVPU3DQC5] STOCK BASE - HyBriD_S_aTe(S8)

HyBriD_S_aTe (S8)​
This is a project I've been working on for a while and I decided to share in case anyone wants to use it or has anything to add to make it better. I am not a programmer but dabble in Mods and Tweaks (Google is the best teacher). The Rom is in process, once there is pretty stable version I will have to stop from developing so much, as I'm already in the dog house.
First and foremost, much thanks to all developers here on XDA especially @drewiskee, for his Telenougat Rom which this Rom is meant to resemble somewhat while including some changes for my personal preference. Also thanks to @tdunham for the original contributions that made Telenougat possible. As I'm short on time I will add mentions as i think of them.
DISCLAIMER:
Code:
Your warranty is now void, nothing can change that so why not try some Roms and Tweaks.
I hold no liability of your device breaks, bricks, burns up, kills you or anyone else. Yada yada blah.
ROM FEATURES:
Based on stock firmware
Added features from S8 system dump (Touchwiz,Bixby,Phone,Calculator,SmartClipEdge,SamsingFlow,Members,Whitepages Called it, Spam detection in settings, Widgets on lockscreen, Reminder, ... really anything that would work)
Su.d support
Init.d Support
Init.d Tweaks, build prop tweaks, CSC tweaks...... you name it
Magisk Root
Hotspot mod
Viper V4A sound mod working out of the box - REMOVED V1.1.0 (this can be added via magisk module)
Reboot menu in notification panel (this based on Telenougat with some edits) - v1.1.8 Themed like s8 power menu
Bixby home page (hide video card for no force closes.)
This includes some personal apps as its a personal Rom so just disable what you don't use - as of v1.1.0 some can be uninstalled via regular uninstall under settings>apps
Mods will be added as I get them to post 2
Center clock hides on lockscreen
I've created a custom Google widget that resembles S8 with some major differences (there's a battery meter around the Google icon, current weather shows instead of "Say OK Google", and the widget changes while charging). - Create widget on home page, choose Zooper 4x1, click on it after placed and select "New Style G bar" (or something else if you prefer)
Knox removed
Deodexed
V1.1.8 - Added flashlight, screen recording, screenshot, download to power menu with options in ROM control
V1.1.8 - Added Quick Launcher to recents with options in ROM control (some require reboot)
V1.1.8 - change color of Quick reboot menu in notification panel in ROM control
v1.1.8 - Trial themes > permanent in ROM control
V1.1.8 - Quickly change the "Set as Default" option in ROM control
V1.1.8 - many other options in ROM control
V1.1.8 - System > Official in About device
V1.1.8 - add Greenify, Rounded corners, Adaway, several others found in ROM control (hidden from launcher)
Built in battery bar or Energy bar in ROM control
More
I tried to go with the most features with keeping function
Some unwanted Sprint bloat removed
APPS INCLUDED
L Speed (this will make the device fly if maxed out and Aggressive Doze saves a ton of battery life)
Energy Bar beta (battery bar at top of status bar).
Alternate File explore option with Root support
Bixby Reminder (shortcut in Bixby home can be added to home screen)
All in One Gestures (customize buttons, swipes, whatever)
PLANNED FOR FUTURE:
Add Flashlight and Recovery to Power Menu
Integrate RomControl (this will take some time, as I am not a programmer by trade I am a flooring installer)
Check for bugs? I'm unable to test everything myself hence the posting of da Rom.
YOUTUBE VIDEO (SORRY ABOUT SOUND, I was at a ball game)
SCREENSHOTS:
LOCK SCREEN
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTIFICATION PANEL
SEARCH WIDGET
BIXBY HOME
SETTINGS
KNOWN ISSUES:
ADD-ONS and MODS:
INSTRUCTIONS:
- Google search "how to flash a custom ROM"
-developer options>OEM unlock must stay ticked from here on out or you will brick
- full wipe recommended (update builds can be dirty. Only if already on Hybrid S8 Rom)
-TWRP Recovery, wipe System, Cache, Data, Delvik Cache.
- Flash, reboot and wait about 10 minutes.
** Wipe System, Cache, and Delvik cache when updating between builds. If issues then do full wipe. **
I will not be dealing with questions that can be answered via Google.
LINKS​:
V1.1.8 Final Final FIXED 7/12/17 Most likely my last update, I ordered an S8+ (although now that I have it there's not much difference and I like the feel of the s6 edge plus a little more). Updated items are above in Rom features section.
HyBriD S_aTe V1.1.6 - updated many apps, install non play store apps by default, no signature check (making easier to update system apps), ROM now says "official" in about screen, added reboot recovery to power menu, changed default wallpapers, changed default lock screen wallpaper to "HyBriD ROM" custom paper, included a dark theme to set by Theme store>my themes (changed to default icons instead of theme icons), more changes.
MIRROR v1.1.6
V1.1.3 - Enable stock battery animation, battery in quicksettings, remove couple apps(install from play store free), changed default wallpapers and added s8 wallpapers, enable install non play store apps by default, disable app verification(experimental), everything should be running well and I am going to focus on mods rather than Rom for a while. Any mods can be flashed via recovery or i will be working on magical modules soon.
v1.1.0 -Final (fix hotspot, hopefully fix avatars in messages, floating_features.xml additions, change in user apps method, remove V4A - future mods will be via flash or magisk for stability, updates and more)
V1.0.7 - final
https://www.mediafire.com/file/6xfmx5cptc6tuub/HyBriD_S8_v1.0.7_52917.zip
Mirror:
https://www.androidfilehost.com/?fid=889764386195903162
DEVELOPMENT FOLDER FOR HyBriD S aTe Rom
Android File Host
OLDER VERSIONS:
v1.0.4 - quickfix
https://www.mediafire.com/?5rl37i1g0g1gds1
TELEGRAM MESSAGE
Me on Telegram​
It takes less time to hit the thumbs up "thanks" button than it takes to download my file. I'm not asking for anything else, don't be lazy.

ADD-ONS and MODS:​
- NO SAFE VOLUME WARNING: (Flashable Zip)
https://drive.google.com/file/d/0Bxg8kVWBF2gcTXFkRDY1VHliY2M/view?usp=drivesdk
- My wallpaper folder. I use Automagic to rotate these every hour on home screen and every unlock on lockscreen.
https://www.mediafire.com/file/35k5g3cc71r5yy6/Wallpapers.zip
- My zooper folder attached to post. Unzip on root of /sdcard if widgets not being included in rom or for anyone that wants the New Style G Bar below. It is light colored when not charging.
CHARGING
NORMAL
- Enable Converter in Calculator app.
Unlock Hotspot versions 1.04 - 1.0.7 (only for G928P, will break other devices and different ROMs most likely) - Flashable zip

Recommended apps:​
- Automagic (automate tasks on your phone. Like tasker but with visual GUI)
If you end up getting this I can share some widgets that let you swap wallpapers throughout the day and any time.
- SystemUI Tuner (turn off any notification icon)
- Soundcamp (make music on your device with instruments and sound boards)

KNOWN ISSUES​
- Places Tab in phone shows nothing nearby, maybe in another region?
- Samsung Pass doesn't work with rooted device. Will remove on future revisions.
- Possible crash of BIXBY when video card is shown? Disable video card. Bixby page>settings>cards
- Some built in apps not playing well being system apps. (TITANIUM BACKUP, POLARIS OFFICE,let me know any others). Just install again from play store or use explorer to go to apk file and install maybe. I will take them out in the future until figure out how to include "user apps" in rom. These will crash at first boot just hit close and continue on.
-V4A sound requires install of module in Magisk Manager
- V1.1.8. Custom background for power menu has some quirks. If ROM control crashes just clear data on that app, then open it and go to "Links and Other Settings">Setting Intents> Click reset power Bg. Can now choose different background. Also, I've found I can only choose background with external app like Mega. I just put all my images online then choose what I want. This is something to do with nougat implementation of image. If an update comes I will try to get it fixed.
- V1.1.8 FIX - Phone force closing, install latest Samsung phone apk

I think this would be a great rom but it doesnt get past the initial service part after you connect to wifi it just lags there and does nothing have dowload it 3 different times 3 different ways

mystahsouljahboy said:
I think this would be a great rom but it doesnt get past the initial service part after you connect to wifi it just lags there and does nothing have dowload it 3 different times 3 different ways
Click to expand...
Click to collapse
updated link. it hung for me but then went through

Thanks Bro
:good::good: Thanks for the quick reply and fix this rom is awesome and smooth and got my night clock back. just need my extreme sound mod and im good to go great rom for the old s6+:good:
jmckeejr said:
updated link. it hung for me but then went through
Click to expand...
Click to collapse

mystahsouljahboy said:
:good::good: Thanks for the quick reply and fix this rom is awesome and smooth and got my night clock back. just need my extreme sound mod and im good to go great rom for the old s6+:good:
Click to expand...
Click to collapse
Cool. Which version?

thanks yoyur great.
jmckeejr said:
Cool. Which version?
Click to expand...
Click to collapse
v1.04 worked for me with no problem. iim trying to fine the extreme sound booster mod again for the edge plus like the note 5 has. but im going to dirty flash this v1.07 now

Cool will try it out, did you get AOD screen to work?

mali85 said:
Cool will try it out, did you get AOD screen to work?
Click to expand...
Click to collapse
AOD would require kernel support. It may be possible to need with kernel to add but I haven't touched kernel yet.
On a side note I found a cool feature never knew. Nougat always sets default app when you first pick it but if you go to settings>apps>menu>default apps there is option to make it all every time like lollipop. I been using "better open with" for this but now won't need it (although it doesn't hurt). You can also change other settings in there for default assistant and others. ?

HOTSPOT
I'm sorry to say that hotspot is not actually working unless you have subscription . I thought it was working I either messed up or didn't wait long enough to get subscription message. This is my highest priority as it's main reason i am not in stock firmware. i have sent message to some devs to hopefully get some help but in mean time I'm going through files swapping them as i can to get it working. If anyone finds a solution please let me know and i will update ROM and/ or put a patch file in OP.

Can you add s8 messaging app

mali85 said:
Can you add s8 messaging app
Click to expand...
Click to collapse
Isn't that what's in ROM? S8 dump version #4.1.58 ROM using #4.2.00 (newer)
Another note I am posting quick fix for hotspot post 2.

jmckeejr said:
Isn't that what's in ROM? S8 dump version #4.1.58 ROM using #4.2.00 (newer)
Another note I am posting quick fix for hotspot post 2.
Click to expand...
Click to collapse
Not sure i am running V4 TeleNougatV4_4/27Build now and messaging app looks like s8 and when i apply theme it updates but in your build i do not have sent avatar and when i apply theme gives me mix of default and themed bubbles.
I tried flashing s8 sms but still not taking effect even with re-flashing ROM fresh full wipe, other then that ROM looks awesome like using t s8 sms looks clean and nice

mali85 said:
Not sure i am running V4 TeleNougatV4_4/27Build now and messaging app looks like s8 and when i apply theme it updates but in your build i do not have sent avatar and when i apply theme gives me mix of default and themed bubbles.
I tried flashing s8 sms but still not taking effect even with re-flashing ROM fresh full wipe, other then that ROM looks awesome like using t s8 sms looks clean and nice
Click to expand...
Click to collapse
It has to be enabled in floating_feature.XML (system/etc) but I don't see any difference after enabling. I will enable by default but can you post a screenshot so I know what I'm looking for final result

Update
New version in OP.
Fix Hotspot, update couple things, floating_feature.XML additions, change user app method(can uninstall regularly), add clipboard panel (external app since clipboard edge not working). Removed V4A future mods can be added via magisk or flashing.
I am working on themes for night clock, can change font colors easily but can't find battery yet. Will post some when done. Not sure how to screenshot.

Final update in OP. Should be good to go I am going to work on other things for a while. If bugs arise I will assist in fixing them, if enough I will do one more update. Tired of setting my phone up over and over to test from wiped state.
Enabled battery animation, battery in quick settings, removed energy bar.
Mirror

Please add the Arabic language in Rom
تم الإرسال من SM-N930F باستخدام Tapatalk

Tawaf said:
Please add the Arabic language in Rom
تم الإرسال من SM-N930F باستخدام Tapatalk
Click to expand...
Click to collapse
Sorry I'm not sure how to do that, but you may be able to choose language in settings>General Management>language and input.
For all: An update is on the way, to be posted in next day or 2. Was trying to get a few more mods implemented

Custom Magisk Module Mod Maker-ADB and Zip Installers

The purpose of this installer is to generate for you a custom module that you can flash in Magisk Manager. It will have all the mods that you have selected from the installer menu. You need root and of course you need to be attached to your PC. On first installation of systemui base, a pop-up asking to give ADB shell root permission will show. Please do so.
Zip installer is installed from your phone, not your pc. You will install the mods through Magisk app. Unzip the Zip Installer onto your internal sdcard. Like ADB installer, start with a SystemUI base. Do not reboot between selections as Magisk as shows after flashing selections (options are found inside the numbered folders). Hit the back button to make your next selection. Do not reboot thru Magisk until after you are done with your selections and have flashed the "Complete Installation" zip.
Custom clocks (date, etc) and internet speed indicators do not change colors due to light-dark background colors like the statusbar icons do.
Android 11
The developer of Active edge gave me permission to use his base so that people would not have to make a choice between his and my mods. All credit for this goes to him. You must delete the active edge sense module and use one of my active edge modules. If it doesn't say active edge then it isn't active edge sense compatible. If there is an issue with edge sense after flashing, do not contact edge sense op with issues. He does not troubleshoot modified versions of his mod (and neither do I).
I'm also including my Pixel Launcher mod. Also a ADB Installer. You can change app drawer background-text color (separately for light mode and dark mode), remove weather from Launcher. Change the number of hot seat icons on home page (and size) as well as change the number of columns in the app drawer.
ADB Installer Instructions-Root is required
1. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work.
2. FLASH ALL THE MODS YOU WANT. ONCE YOU DONE WITH EVERYTHING, FLASH THE "COMPLETE INSTALLATION" Option. This will create a Magisk Manager flashable zip in a folder on your sdcard called ozop. Flash that to install your selection of mods.
Root required
ADB Instructions.
1. Unzip ADB Mods Installer Files.zip on your PC
2. Run TulsadiverModsInstaller.bat (Give ADB Shell Root Permissions. If missed on first opportunity, turn on in magisk manager, superuser)
3. ADB debugging Enabled
4. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work
5. Go through the other options selecting what all mods you want. It is generally best to start at the top and work your way down.
6. Once finished with selections, run "Complete Installation" at the bottom. This will generate your mymagisk.zip module in a folder called "ozop" on your sdcard.
Root required
ZIP Instructions.
1. Unzip Zip Installer onto your internal sdcard
2. Flash thru Magisk app. Flash the SystemUI Base First. It provides the necessary smali files and public ID's for everything to work
(Do not reboot between selections as Magisk shows after flashing selections. Hit the back button to make your next selection)
3. Go through the other options selecting the mods you want. It is generally best to start at the top and work your way down.
4. Once finished with selections, flash "Complete Installation" at the top. This will install your selections as a Magisk module.
List of MODS Available
Clock Format and Position Mods
Internet Traffic Speed Single Indicator (changes from upload-download) otherwise signals are over/under
Choose Traffic Speed Indicator Up-Down Icon Colors (default is white)
Navbar Swap
Remove NavBar
3 Minit Battery
Battery Bar Mod
One percent custom battery Mods-Several to choose from
One percent custom battery Text-only-Several to choose from
Colored Statusbar-Navbar Icons
Choose number of QS columns 3-7
Colored Statusbar Icons
Remove Carrier Text Options
Smaller LTE Icon
Animations
Fonts (including Lockscreen clock)
Change QS pulldown circle color
Change Status bar Data Icon to a "cell tower" looking icon (see below)
Change QS data icon to a cell tower icon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note Added a couple of wifi and data signal options.
WiFi 1 and Cell Tower 1
WiFi 2 Cell Tower 2
WiFi 3 data 3
Includes a batch (.bat), and powershell installers, one for windows, one for linux. Big thanks to @wrongway213 for doing all the testing
and helping with the linux powershell installer.
Android 12 comes with a more narrow brightness-volume bar option.
This is a SystemUI mod. It's not compatible with other SystemUI mods.
There's just one base now. To change the QS pulldown colors, go to settings/display/device theme at the bottom. The black options change the settings background from gray to black.
---------------------
Zip Installer
Android 12.1
July update
Uploaded 7 -8-22
https://mega.nz/file/cdIFTBJa#Rvktpa0sU6URmGRse-T6LcEUoVDMItxhsHzump-L-f4
ADB installer
12.1
July update
Uploaded 7 -8-22
https://mega.nz/file/RJhCGJAD#BDu5ePwvQnvPYzdMhRo6V993kRJe9H7nr9MXnEacd_o
----------------------
Android 12 - January update
Uploaded 1-8-22
ADB Mod Installer FilesPixel4XL12.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
---------------------------
Android 11
Uploaded 7-9-21
File on MEGA
mega.nz
ADB Mod Installer FilesPixel4XLJuly.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------
Android 10
ADB Module maker uploaded 8-6-20
https://www.androidfilehost.com/?fid=8889791610682907792
Zip Installer Instead of ADB Module maker
Unzip zip into a folder on your internal sdcard. The folder name cannot have spaces in it.
Boot TWRP, find your folder. Install base first. Install the mods you want, then flash complete installation zip. Reboot.
TWRP zip Installer
https://www.androidfilehost.com/?fid=8889791610682907810
--------------------------------------------------------------------------------------
Pixel Launcher Mod
Start by picking a base. Bases come with, or without, a search bar and Hotseat heights The larger number of rows you pick, the lower your hotseat drops on your home screen. If your hotseat comes out too low, try again with a higher base.
Remove Search Bar
App Drawer background color (Light and Dark Mode)
App Drawer Text Color or remove (Light and Dark Mode)
Home screen App Text Color
Smart-screen Text color
App Icon Sizes 45-50-56 dip (56 is stock)
Columns (5-6-7)
Rows (5 through 11)
Android 12
ADB Pixel launcher Uploaded 12-18-21
NexusLauncherReleaseADBPixel12.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
------------------------
Android 11
ADB Pixel Launcher Installer uploaded 7-9-21
NexusLauncherReleaseADBPixel4XLJuly.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------
Android 10
ADB Pixel Launcher Installer uploaded 6-18-20
https://www.androidfilehost.com/?fid=8889791610682873110

Tulsadiver said:
snip
Click to expand...
Click to collapse
Thanks for this!
Will this have the Active Edge support built-in like your center clock mod?

ilal2ielli said:
Thanks for this!
Will this have the Active Edge support built-in like your center clock mod?
Click to expand...
Click to collapse
Yes, there are Active edge bases to choose from.

Tulsadiver said:
Yes, there are Active edge bases to choose from.
Click to expand...
Click to collapse
Just finished building a basic mod with Active Edge, center clock with day, and WiFi traffic. Everything works perfectly.
Thanks again!

Hi,
Thanks for this.
I managed to get a center clock , and swap the nav bar around. :good:
If I want to add more things , like changing text colors in qs for example , do I have to make an entire new mymagisk.zip?
I.E. run the base and framework again?
If I do , will I have to run the center clock and nav swap again?
And what happens to the mymagisk.zip?
Does it get replaced , or do I have to delete it before I start again?

Had another thought, will we need to rebuild the module when the monthly updates come like it was in the past?

malybru said:
Hi,
Thanks for this.
I managed to get a center clock , and swap the nav bar around. :good:
If I want to add more things , like changing text colors in qs for example , do I have to make an entire new mymagisk.zip?
I.E. run the base and framework again?
If I do , will I have to run the center clock and nav swap again?
And what happens to the mymagisk.zip?
Does it get replaced , or do I have to delete it before I start again?
Click to expand...
Click to collapse
Yes, you have to redo everything you did previously and add the new ones as well. Apks can only be modded once in magisk so it has to be done over. The module.prop remains the same. mymagisk.zip will be over-written and once flashed, the module will be replaced. No need to remove. What I do is rename my mymagisk.zip to something else and leave it in case I want to use it again. Again, the module prop is the same so it will over-write what is currently installed.

ilal2ielli said:
Had another thought, will we need to rebuild the module when the monthly updates come like it was in the past?
Click to expand...
Click to collapse
Depends on what changes. Lots of times the SystemUIGoogle.apk and framework-res.apk are left unchanged in updates. But if it changes, I'll have to build and upload another new updated ADB Installer.
Edit: that is why I try to put dates on my uploads.

Tulsadiver said:
Yes, you have to redo everything you did previously and add the new ones well. Apks can only be modded once in magisk so it has to be done over. The module.prop remains the same. mymagisk.zip will be over-written and the once flashed, the module will be replaced. No need to remove. What I do is rename my mymagisk.zip to something else and leave it in case I want to use it again. Again, the module prop is the same so it will over-write what is currently installed.
Click to expand...
Click to collapse
OK , thanks.
I actually find this method easier than faffing around in TWRP.
Good idea to keep the ready made "mymagisk.zips" for future re-use

malybru said:
OK , thanks.
I actually find this method easier than faffing around in TWRP.
Good idea to keep the ready made "mymagisk.zips" for future re-use
Click to expand...
Click to collapse
Yes and if someone likes your setup you can share your ready made zip with someone else. I make them for people all the time as this can be difficult for some people and also the ADB Installer is a large zip. Some people have poor internet connections.

Tulsadiver said:
Depends on what changes. Lots of times the SystemUIGoogle.apk and framework-res.apk are left unchanged in updates. But if it changes, I'll have to build and upload another new updated ADB Installer.
Edit: that is why I try to put dates on my uploads.
Click to expand...
Click to collapse
Got it. Thanks!

Sorry to double post, but have you @Tulsadiver heard anything about the Active Edge Magisk module support causing slow downs, freezes, and needing to hard reboot to get the phone responding again?
A post in Freak07's kernel thread theorizes that: https://forum.xda-developers.com/pi...aq-1-0-0-pixel-4-xl-aka-t3992213/post80749011
After removing the Active Edge support from your mods and moving to flar2's Button Remapper fixed the issue for me so far.
Any thoughts as to why the Active Edge modifications would cause issues for Pixel 4's?

ilal2ielli said:
Sorry to double post, but have you @Tulsadiver heard anything about the Active Edge Magisk module support causing slow downs, freezes, and needing to hard reboot to get the phone responding again?
A post in Freak07's kernel thread theorizes that: https://forum.xda-developers.com/pi...aq-1-0-0-pixel-4-xl-aka-t3992213/post80749011
After removing the Active Edge support from your mods and moving to flar2's Button Remapper fixed the issue for me so far.
Any thoughts as to why the Active Edge modifications would cause issues for Pixel 4's?
Click to expand...
Click to collapse
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.

Tulsadiver said:
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.
Click to expand...
Click to collapse
Thanks for the tip, I'll look for the telegram thread.

Tulsadiver said:
None. I've never used it before. I did have to get it in a weird way. He no longer puts the SystemUIGoogle.apk for each phone in the module but edits the apks on the fly. I had someone pull me a copy from the module after it was installed. Maybe the 4 xl is different enough to cause issues. He has a telegram thread. Try posting there.
Click to expand...
Click to collapse
@Tulsadiver you offer your mods for every available build?
10.0.0 (QD1A.190821.007, Oct 2019) Link 04b0499db27c14335dd01f5036225c1bb30132dfc786fbc1ee579af64e138351
10.0.0 (QD1A.190821.011, Oct 2019) Link f4d0cfd109d2ea5e4f3e807df5350edc26aede247ea2e0f5c2e338afd7a83c62
10.0.0 (QD1A.190821.011.C4, Oct 2019) Link dd397091f50f3196f39df636cf6cad53ef82fc5c066db3d39fbb7343f53d2045
etc?
Also all files are on the branch now. You can pull them from there: https://github.com/Magisk-Modules-Repo/active_edge_system_mod/tree/Files

j to the 4n said:
@Tulsadiver you offer your mods for every available build?
10.0.0 (QD1A.190821.007, Oct 2019) Link 04b0499db27c14335dd01f5036225c1bb30132dfc786fbc1ee579af64e138351
10.0.0 (QD1A.190821.011, Oct 2019) Link f4d0cfd109d2ea5e4f3e807df5350edc26aede247ea2e0f5c2e338afd7a83c62
10.0.0 (QD1A.190821.011.C4, Oct 2019) Link dd397091f50f3196f39df636cf6cad53ef82fc5c066db3d39fbb7343f53d2045
etc?
Also all files are on the branch now. You can pull them from there: https://github.com/Magisk-Modules-Repo/active_edge_system_mod/tree/Files
Click to expand...
Click to collapse
Cool! Yes sir, all capable Pixel builds. I swear I looked before but couldn't find them.

Uploaded new ADB Installers. Nov update.

Hi. Thanks for you good work
Q: If I use your installer to install some mods and want to edit or change the mods just i install ADB again without wipe anything?
And what if I want back to STOCK without wipe my data?
I want install your installer just for Swipe Navigation Old that coming with Pixel 3 or if you have time to make zip for me
Sorry for my English
Edit: Just i downloaded all files and i see everything is so easy [emoji16]
Sent from my Pixel 4 XL using Tapatalk

1- Flash SystemUI Bases Stock like
2- Flash Framework Bases - Stock like base
3- I choose what I want ( clock center - Navber swap - small LTE ) And from ADB launcher just remove weather Then I see the zip files ( mymagisk.zip - mymagisklauncher.zip ) in my phone in folder name: vrthemeADBmagisk I flashed vis Magisk Manager. Sure I reboot the phone but nothing changed?
Sent from my Pixel 4 XL using Tapatalk

DinarQ8 said:
1- Flash SystemUI Bases Stock like
2- Flash Framework Bases - Stock like base
3- I choose what I want ( clock center - Navber swap - small LTE ) And from ADB launcher just remove weather Then I see the zip files ( mymagisk.zip - mymagisklauncher.zip ) in my phone in folder name: vrthemeADBmagisk I flashed vis Magisk Manager. Sure I reboot the phone but nothing changed?
Click to expand...
Click to collapse
Did you run 30 - Complete Installation?
You should end up with the module zip in a folder name ozop. That's where mine end up.

[MOD][MAGISK][ANDROID 11] Addon Features for Pixel Devices - Pixel 4 XL Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what is this? This is a Magisk module that adds the following features to any Pixel 3, 4 or 5 device running on Android 11:
Forces Google Sans font system wide
63 Accent colors
12 Icon shapes
22 Fonts
Wallpapers Breel 2019; 2020 & 2020a
9 different Dark Styles
Adds 2 button mode navigation (it was removed on Android 11 but I think some users like that navigation mode, so I add it)
Background Blur options
Blur Intensity options
Adaptive sound options
Navigation bar options (hide pill, reduce keyboard bottom space size, hide assist handles)
SystemUI Tuner options
Rounded corner options
QS Rows x Columns options
QS Footer Drag Handle options (Default, Accent based, Hidden)
Option to show more icon notifications on staus bar
Forces Basic Attestation thus making ctsProfile true by just enabling Magisk Hide
Rom Control app (to setup all options available that you cannot using just Styles & Wallpapers)
Everything can be controlled using Styles & Wallpapers and also Rom Control app.
This MOD will probably work on any AOSP, or close to it, ROMs.
Get it here: Android_11_Addon_Features_for_Pixel_V8.zip
Just a note, this module already includes a SafetyNet fix, so if you're using another module for SafetyNet, please remove it since I don't know if that couldn't cause issues.
For all users already running Android 12 please go to THIS THREAD.
Addon Features EXCLUSIVE for Pixel Devices running on STOCK Android 11 ROM:​
These exclusive and specific for Pixel Devices running on STOCK Android 11 ROM Magisk modules that you'll see next adds all of the features stated above but with extra goodies!
"Exclusive features" included:
Battery Bar
Battery Styles
Clock Customization
Corrected lock screen icons not changing after applying different theme
"Disco Dingo" the QS (just a funny name for the option to apply random colors on QS toggles)
Hide QS Labels
Lock screen album art customization
Lock screen camera shortcut (enable/disable)
Lock screen custom clock faces
Network Traffic Indicators (unfortunately, on redfin, it only works on QS Header and not on status bar)
QS Battery percentage independent options
QS Header opacity level control
QS Headers styles
QS Panel opacity level control
QS Tiles styles
QS Data usage info
QS Rows x Columns options (both on portrait and landscape modes)
Reduce Status bar height (and correct left padding on devices with the notch on the left)
Removed side assist handles from lock screen
Status bar Quick Pulldown (Never, Right pulldown, Left pulldown, Always)
Switch styles
Touch QS Labels to add or remove on QS customize panel (just didn't bothered to translate "Tap or Drag Tiles..." strings, so you'll continue to see "Drag Tiles..." but the feature is there, try it.)
Exclusive features downloads:
Android_11_Addon_Features_For_Pixel_V13.zip -> "Harmless" module that works on any Pixel device running on STOCK ROM, much like the "universal mod" shared above, but with a Rom Control app version that has more options. The "exclusive features" options won't do anything if the SystemUI module, shared next, isn't installed. If your going to try these exclusive features module, install this one and not the one shared above. The SaftetyNet is also included on this module, so once again, don't try to use any other SafetyNet module since it could break things.
Android_11_SystemUI_for_Addon_Features_V10.zip -> This is "THE" module! This module adds all xml and smali changes into SystemUI. Without this module the "exclusive features" won't work. Also, this module could be responsible for breaking boot if it fails to work at your end. I've ran several tests on my device (a Pixel 4a) and didn't face any issues but, since this module replaces stock SystemUI for a modded SystemUI, you could run into problems if some other module tries to do the same or it's simply incompatible with it. This module was updated to match latest Android 11 October 2021 build.
Android_11_SystemUI_for_Addon_Features_V9.zip -> Use this version ONLY if you're still running any Android 11 build between June and September 2021!
Notes regarding the "exclusive version" for Pixel devices:
DO NOT, I'll repeat, DO NOT flash "SystemUI module" zip on any other ROM besides stock. It won't work! If you want those extra features on your current ROM you will have to port them yourself. I explain how to later on this post.
Make sure that you're able to run adb shell as root before rebooting your device.
If something goes wrong after flashing "SystemUI module", like if your device doesn't boot or something stupid, connect your phone to your PC during boot and run this:
Code:
adb shell
Code:
su
Code:
rm -rf /data/adb/modules/Modded_SystemUI && reboot
If you forgot to enable the ability to run adb shell as root, and if your device is on a "non-boot" state, the only way you can fix that is to remove all Magisk modules you have installed. That can be achieved by running the following commands during boot:
Code:
adb shell
Code:
magisk --remove-modules
​
If none of the above methods work to get your device booting, then you have to boot into safe mode. By doing so, Magisk will disable all modules for you (it doesn't uninstall them, just disables them). To force a boot into safe mode all you need to do is to keep pressing volume down button during boot animation. After the system boots into safe mode you can reboot your device to boot up normally (since all modules will be disabled). If you get stuck during boot animation again, just force another reboot (I've had to do that during my tests).
The "SystemUI module" requires that your device is already updated to March build!
When a new OTA update comes please don't flash the "SystemUI module" until I say it's ok to do so. I mean, me or any other member who may have tested it. Why? Because Google may change things on stock SystemUI between builds. When that happens, I have to recreate the module again to adapt those changes. For instance, March build was not compatible with the module that was built on top of February build SystemUI. Rest assured that I'll always test the module with new builds and update as necessary.
In case your device gets caught in a bootloop, please provide me a logcat so I may try and look if anything can be done about it. To do so, during boot connect your device to your PC and grab a logcat with this adb command:
Code:
adb logcat > log.txt
Requirements:
Unlocked bootloader
Magisk Root | Magisk Manager
Suggestion:
Uninstall all other modules you may have installed IF you're going for the "exclusive features". They could be incompatible with the "SystemUI module" thus making the device get caught in a bootloop. You may install them afterwards, one by one, just to make sure everything is ok.
If you're up to it, instead of disabling/removing modules, just flash latest stock build through fastboot. If you want to retain your data, remove the "-w" flag from the update command on flash-all script.
How to install? (If you're running a Pixel 5, just install the module...you don't need all these next steps)
Uninstall Device Personalization Services updates
Clear Google Play Store app data and cache
Flash the Magisk Module(s)
Reboot device
Open Google Play Store and update Device Personalization services (or any other Pixel exclusive app you see it needs to update).
Profit!
Video:
Check all Rom Control (with exclusive features) options HERE.
How's these "exclusive features" even possible?
All (well, not all but almost...) features that you see on Pixel Devices "SystemUI module" were reverse engineered from Evolution X ROM source code. The source code is available on the link bellow shown on the credits. This means that I've been practicing some hard core "old school" Android smali edition in order to get this working. So, yes, I have some credits about this but, if it weren't for the original developers and it's public source code, none of this would be possible. Thank them for this!
Smali, and xml, edition wasn't enough to get this working. After decompiling, changing/adapt the code and recompiling everything again, I had to find a way to make it bootable without messing with the original apk signature. And here is where VR Theme logic came in handy. So thanks for the original dev who brought us this feature.
As for ROM Control app....this was/is a project created by daxgirl and wubydax back in 2015! So yeah, I'm not bringing anything new here, I just followed their instructions in order to get the features working after editing smali/xml with the source code taken from Evolution X. The original app source code is also available on the link shared on the credits.
I've just combined all of the above into a Magisk Module and shared here so that we can get the best of both worlds....a stock ROM with custom features included.
Rom Control with "exclusive features" source code:
https://github.com/ElTifo/CustomSettingsForDevs/tree/Pixel4a
Want to port the "exclusive features" to your Pixel device running on other ROM? Here's how:
https://github.com/ElTifo/CustomSettingsForDevs/tree/Pixel4a/app/src/mods
Credits:
EvolutionX ROM team, specially @joeyhuab
@daxgirl and @Wuby986 for ROM Control project and source code.
@Tulsadiver for showing me how to adapt VR Theme logic originally used on 3Minit Battery Mod by @gharrington.
@Ticklefish for Tickle My Android
@topjohnwu for Magisk
@kdrag0n for Safetynet-fix.
@Freak07 for Adaptive Audio
Cheers and enjoy!

Works great! Thank! Only the cover on the lock screen from YouTube music didn't turn on

sasory said:
Works great! Thank! Only the cover on the lock screen from YouTube music didn't turn on
Click to expand...
Click to collapse
It didn't? Weird. It should work with any media player. Have you tried to pause the video/song and start again to check it?
You've enabled the option on ROM Control, right?

Any chance this works on Android 12?

Gordietm said:
Any chance this works on Android 12?F
Click to expand...
Click to collapse
For Android S I've made other module that just adds some features like the "V8 module" on the OP and allows you to test the S hidden features.
For S I haven't made the "exclusive features" since, until final release, Google will most likely change at lot of stuff so there's no point on wasting time smali editing S SystemUI.
I'll attach it on this post if you want to try.
Every feature and instructions are on the attached PDF.
Cheers!

Typhus_ said:
It didn't? Weird. It should work with any media player. Have you tried to pause the video/song and start again to check it?
You've enabled the option on ROM Control, right?
Click to expand...
Click to collapse
Yes, I tried it in different ways. And the pixel stand setting still doesn't work.

It's strange, for some reason I don't have player controls on the lock screen at all...
Understood. This is due to the fact that I had "Skip lock screen"

sasory said:
It's strange, for some reason I don't have player controls on the lock screen at all...
Understood. This is due to the fact that I had "Skip lock screen"
Click to expand...
Click to collapse
Just try other player like Poweramp.

Typhus_ said:
For Android S I've made other module that just adds some features like the "V8 module" on the OP and allows you to test the S hidden features.
For S I haven't made the "exclusive features" since, until final release, Google will most likely change at lot of stuff so there's no point on wasting time smali editing S SystemUI.
I'll attach it on this post if you want to try.
Cheers!
Click to expand...
Click to collapse
Works well on Android 12. Thanks!

Typhus_ said:
For Android S I've made other module that just adds some features like the "V8 module" on the OP and allows you to test the S hidden features.
For S I haven't made the "exclusive features" since, until final release, Google will most likely change at lot of stuff so there's no point on wasting time smali editing S SystemUI.
I'll attach it on this post if you want to try.
Cheers!
Click to expand...
Click to collapse
I don't believe the privacy indicators and dashboard are working. At least, nothing shows up when one of my apps uses the camera or mic is being used.

Gordietm said:
I don't believe the privacy indicators and dashboard are working. At least, nothing shows up when one of my apps uses the camera or mic is being used.
Click to expand...
Click to collapse
They aren't working on DP1 nor DP1.1.
Maybe DP2 fixes that.

Ho thanks for your work... Is there the possibility ti add dt2s?! Ty

gotty91 said:
Ho thanks for your work... Is there the possibility ti add dt2s?! Ty
Click to expand...
Click to collapse
Unfortunately no, it isn't. Dt2s requires modding framework.jar and that, unfortunately, doesn't work. I've tried... couldn't make it boot after modding.

Typhus_ said:
Unfortunately no, it isn't. Dt2s requires modding framework.jar and that, unfortunately, doesn't work. I've tried... couldn't make it boot after modding.
Click to expand...
Click to collapse
Thanks for your replay

V9 module works fine.
However, when I flash v9+system ui module together, the alarm icon is missing when unlocked the phone.

bigJbig said:
V9 module works fine.
However, when I flash v9+system ui module together, the alarm icon is missing when unlocked the phone.
Click to expand...
Click to collapse
The alarm icon is missing? You mean you can't see your alarm icon on status bar? And on expanded QS header, is it there?
Could you enable SystemUI Tuner on Rom Control and then check on Tuner Settings (that appears on system settings) if by any chance the alarm icon is disabled?

Typhus_ said:
The alarm icon is missing? You mean you can't see your alarm icon on status bar? And on expanded QS header, is it there?
Could you enable SystemUI Tuner on Rom Control and then check on Tuner Settings (that appears on system settings) if by any chance the alarm icon is disabled?
Click to expand...
Click to collapse
To answer your first two questions: yes
Then I followed your suggestion (systemui tuner) and now the alarm icon is showing on the status bar!
Thanks

bigJbig said:
To answer your first two questions: yes
Then I followed your suggestion (systemui tuner) and now the alarm icon is showing on the status bar!
Thanks
Click to expand...
Click to collapse
Nice! As for the rest, everything working ok? You're able to, for instance, change battery icon?

Typhus_ said:
Nice! As for the rest, everything working ok? You're able to, for instance, change battery icon?
Click to expand...
Click to collapse
Everything works fine so far!
Thanks again for your great work!

bigJbig said:
Everything works fine so far!
Thanks again for your great work!
Click to expand...
Click to collapse
Thanks for the feedback. Just making sure everything was ok with this model.
Enjoy!

[MOD][MAGISK][ANDROID 11] Addon Features for Pixel Devices - Pixel 4a 5g Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what is this? This is a Magisk module that adds the following features to any Pixel 3, 4 or 5 device running on Android 11:
Forces Google Sans font system wide
63 Accent colors
12 Icon shapes
22 Fonts
Wallpapers Breel 2019; 2020 & 2020a
9 different Dark Styles
Adds 2 button mode navigation (it was removed on Android 11 but I think some users like that navigation mode, so I add it)
Background Blur options
Blur Intensity options
Adaptive sound options
Navigation bar options (hide pill, reduce keyboard bottom space size, hide assist handles)
SystemUI Tuner options
Rounded corner options
QS Rows x Columns options
QS Footer Drag Handle options (Default, Accent based, Hidden)
Option to show more icon notifications on staus bar
Forces Basic Attestation thus making ctsProfile true by just enabling Magisk Hide
Rom Control app (to setup all options available that you cannot using just Styles & Wallpapers)
Everything can be controlled using Styles & Wallpapers and also Rom Control app.
This MOD will probably work on any AOSP, or close to it, ROMs.
Get it here: Android_11_Addon_Features_for_Pixel_V8.zip
Just a note, this module already includes a SafetyNet fix, so if you're using another module for SafetyNet, please remove it since I don't know if that couldn't cause issues.
For all users already running Android 12 please go to THIS THREAD.
Addon Features EXCLUSIVE for Pixel Devices running on STOCK Android 11 ROM:​
These exclusive and specific for Pixel Devices running on STOCK Android 11 ROM Magisk modules that you'll see next adds all of the features stated above but with extra goodies!
"Exclusive features" included:
Battery Bar
Battery Styles
Clock Customization
Corrected lock screen icons not changing after applying different theme
"Disco Dingo" the QS (just a funny name for the option to apply random colors on QS toggles)
Hide QS Labels
Lock screen album art customization
Lock screen camera shortcut (enable/disable)
Lock screen custom clock faces
Network Traffic Indicators (unfortunately, on redfin, it only works on QS Header and not on status bar)
QS Battery percentage independent options
QS Header opacity level control
QS Headers styles
QS Panel opacity level control
QS Tiles styles
QS Data usage info
QS Rows x Columns options (both on portrait and landscape modes)
Reduce Status bar height (and correct left padding on devices with the notch on the left)
Removed side assist handles from lock screen
Status bar Quick Pulldown (Never, Right pulldown, Left pulldown, Always)
Switch styles
Touch QS Labels to add or remove on QS customize panel (just didn't bothered to translate "Tap or Drag Tiles..." strings, so you'll continue to see "Drag Tiles..." but the feature is there, try it.)
Exclusive features downloads:
Android_11_Addon_Features_For_Pixel_V13.zip -> "Harmless" module that works on any Pixel device running on STOCK ROM, much like the "universal mod" shared above, but with a Rom Control app version that has more options. The "exclusive features" options won't do anything if the SystemUI module, shared next, isn't installed. If your going to try these exclusive features module, install this one and not the one shared above. The SaftetyNet is also included on this module, so once again, don't try to use any other SafetyNet module since it could break things.
Android_11_SystemUI_for_Addon_Features_V10.zip -> This is "THE" module! This module adds all xml and smali changes into SystemUI. Without this module the "exclusive features" won't work. Also, this module could be responsible for breaking boot if it fails to work at your end. I've ran several tests on my device (a Pixel 4a) and didn't face any issues but, since this module replaces stock SystemUI for a modded SystemUI, you could run into problems if some other module tries to do the same or it's simply incompatible with it. This module was updated to match latest Android 11 October 2021 build.
Android_11_SystemUI_for_Addon_Features_V9.zip -> Use this version ONLY if you're still running any Android 11 build between June and September 2021!
Notes regarding the "exclusive version" for Pixel devices:
DO NOT, I'll repeat, DO NOT flash "SystemUI module" zip on any other ROM besides stock. It won't work! If you want those extra features on your current ROM you will have to port them yourself. I explain how to later on this post.
Make sure that you're able to run adb shell as root before rebooting your device.
If something goes wrong after flashing "SystemUI module", like if your device doesn't boot or something stupid, connect your phone to your PC during boot and run this:
Code:
adb shell
Code:
su
Code:
rm -rf /data/adb/modules/Modded_SystemUI && reboot
If you forgot to enable the ability to run adb shell as root, and if your device is on a "non-boot" state, the only way you can fix that is to remove all Magisk modules you have installed. That can be achieved by running the following commands during boot:
Code:
adb shell
Code:
magisk --remove-modules
​
If none of the above methods work to get your device booting, then you have to boot into safe mode. By doing so, Magisk will disable all modules for you (it doesn't uninstall them, just disables them). To force a boot into safe mode all you need to do is to keep pressing volume down button during boot animation. After the system boots into safe mode you can reboot your device to boot up normally (since all modules will be disabled). If you get stuck during boot animation again, just force another reboot (I've had to do that during my tests).
The "SystemUI module" requires that your device is already updated to March build!
When a new OTA update comes please don't flash the "SystemUI module" until I say it's ok to do so. I mean, me or any other member who may have tested it. Why? Because Google may change things on stock SystemUI between builds. When that happens, I have to recreate the module again to adapt those changes. For instance, March build was not compatible with the module that was built on top of February build SystemUI. Rest assured that I'll always test the module with new builds and update as necessary.
In case your device gets caught in a bootloop, please provide me a logcat so I may try and look if anything can be done about it. To do so, during boot connect your device to your PC and grab a logcat with this adb command:
Code:
adb logcat > log.txt
Requirements:
Unlocked bootloader
Magisk Root | Magisk Manager
Suggestion:
Uninstall all other modules you may have installed IF you're going for the "exclusive features". They could be incompatible with the "SystemUI module" thus making the device get caught in a bootloop. You may install them afterwards, one by one, just to make sure everything is ok.
If you're up to it, instead of disabling/removing modules, just flash latest stock build through fastboot. If you want to retain your data, remove the "-w" flag from the update command on flash-all script.
How to install? (If you're running a Pixel 5, just install the module...you don't need all these next steps)
Uninstall Device Personalization Services updates
Clear Google Play Store app data and cache
Flash the Magisk Module(s)
Reboot device
Open Google Play Store and update Device Personalization services (or any other Pixel exclusive app you see it needs to update).
Profit!
Video:
Check all Rom Control (with exclusive features) options HERE.
How's these "exclusive features" even possible?
All (well, not all but almost...) features that you see on Pixel Devices "SystemUI module" were reverse engineered from Evolution X ROM source code. The source code is available on the link bellow shown on the credits. This means that I've been practicing some hard core "old school" Android smali edition in order to get this working. So, yes, I have some credits about this but, if it weren't for the original developers and it's public source code, none of this would be possible. Thank them for this!
Smali, and xml, edition wasn't enough to get this working. After decompiling, changing/adapt the code and recompiling everything again, I had to find a way to make it bootable without messing with the original apk signature. And here is where VR Theme logic came in handy. So thanks for the original dev who brought us this feature.
As for ROM Control app....this was/is a project created by daxgirl and wubydax back in 2015! So yeah, I'm not bringing anything new here, I just followed their instructions in order to get the features working after editing smali/xml with the source code taken from Evolution X. The original app source code is also available on the link shared on the credits.
I've just combined all of the above into a Magisk Module and shared here so that we can get the best of both worlds....a stock ROM with custom features included.
Rom Control with "exclusive features" source code:
https://github.com/ElTifo/CustomSettingsForDevs/tree/Pixel4a
Want to port the "exclusive features" to your Pixel device running on other ROM? Here's how:
https://github.com/ElTifo/CustomSettingsForDevs/tree/Pixel4a/app/src/mods
Credits:
EvolutionX ROM team, specially @joeyhuab
@daxgirl and @Wuby986 for ROM Control project and source code.
@Tulsadiver for showing me how to adapt VR Theme logic originally used on 3Minit Battery Mod by @gharrington.
@Ticklefish for Tickle My Android
@topjohnwu for Magisk
@kdrag0n for Safetynet-fix.
@Freak07 for Adaptive Audio
Cheers and enjoy!

Awesome!

Thank you for taking the time to make your mod possible for this device! This is amazing that I can get this experience on Stock, it feels like I'm on a custom Rom now.
I've been running v9 addon with systemUI exclusive features and everything works great except 2 minor things. One is enabling blur creates quite a bit of lag at any blur level, I believe this is already a known issue. The other is that center clock mod is a little off for this device. Neither is a big deal and everything else works perfectly.

GoldElocks said:
Thank you for taking the time to make your mod possible for this device! This is amazing that I can get this experience on Stock, it feels like I'm on a custom Rom now.
I've been running v9 addon with systemUI exclusive features and everything works great except 2 minor things. One is enabling blur creates quite a bit of lag at any blur level, I believe this is already a known issue. The other is that center clock mod is a little off for this device. Neither is a big deal and everything else works perfectly.
Click to expand...
Click to collapse
Yeah the blur kind of slow things down sometimes, that's why I've added the blur levels. Hopefully, the lower the value the less lag.
As for the center clock, well that's because of the camera notch...not much I can do there since the padding moves everything to the right and the center clock layout already has 0 for left padding value. If you enable the date on the left side, it minimizes that awful "center" look.
Cheers and enjoy!

Thanks
just a clarification I have a Pixel 4a 5g root on the stock ROM Android March 11 update. which zip do I need to flash to have access to all mods? the 2 zip after the universal zip ?
Thanks.
Have a good day.
Ps (remove safetypass and G-mods visual)

ggkameleon said:
Thanks
just a clarification I have a Pixel 4a 5g root on the stock ROM Android March 11 update. which zip do I need to flash to have access to all mods? the 2 zip after the universal zip ?
Thanks.
Have a good day.
Ps (remove safetypass and G-mods visual)
Click to expand...
Click to collapse
"V9" Addon features + SystemUI. Those two.

Thanks

Hi ! Sorry for second post.
But I use center clock and don't know if they had on your ? If not can use the mod with your mod.
And on G-Visual mod you change the Phil bar (I use the Xiaomi Phil style) is more big. They had too on your mod and don't know if G-Visual Mod change system Ui.
Thanks

ggkameleon said:
Hi ! Sorry for second post.
But I use center clock and don't know if they had on your ? If not can use the mod with your mod.
And on G-Visual mod you change the Phil bar (I use the Xiaomi Phil style) is more big. They had too on your mod and don't know if G-Visual Mod change system Ui.
Thanks
Click to expand...
Click to collapse
I suggest you to disable all other MODs you may have and just test the ones included on this one. Then, if some feature you like is missing, try to install other module that has the feature you want and check if it works.

Typhus_ said:
I suggest you to disable all other MODs you may have and just test the ones included on this one. Then, if some feature you like is missing, try to install other module that has the feature you want and check if it works.
Click to expand...
Click to collapse
Yes it's right and if mistake restart on safe mod and disable it.
Have a good day

Homeboy76 said:
Awesome!
Click to expand...
Click to collapse
All features of exclusive not working.. like center clock and network traffic on pixel experience. Any solution?

Features like center clock and network traffic not working also qs customization

ShahedSwapnil said:
Features like center clock and network traffic not working also qs customization
Click to expand...
Click to collapse
Did you flash SystemUI mod?
And other thing, the exclusive features included on SystemUI MOD only work on stock ROM, as stated on the OP.
Ok?

Typhus_ said:
Did you flash SystemUI mod?
And other thing, the exclusive features included on SystemUI MOD only work on stock ROM, as stated on the OP.
Ok?
Click to expand...
Click to collapse
So it won't work in pixel experience custom rom? Its almost like a stock rom

ShahedSwapnil said:
So it won't work in pixel experience custom rom? Its almost like a stock rom
Click to expand...
Click to collapse
No, it won't. Only "V8" module will.

Typhus_ said:
No, it won't. Only "V8" module will.
Click to expand...
Click to collapse
Thank you. Is there any other way i can make clock in center and add traffic monitor?!

ShahedSwapnil said:
Thank you. Is there any other way i can make clock in center and add traffic monitor?!
Click to expand...
Click to collapse
Both of those features already exist with V9+SystemUI modules. Have you tried them on Rom Control?

ShahedSwapnil said:
Thank you. Is there any other way i can make clock in center and add traffic monitor?!
Click to expand...
Click to collapse
Not likely with this current mod unless you are on Stock Android 11 March build. You can try Tulsadiver's center clock CC clock mod but again it may not work on a custom ROM.
Are you on a Pixel 4a 5G? I wasn't aware of a Pixel experience ROM out for this device.

Hello, just for information, I flash the mod by deleting before Center Clock, G-Mod Visual and SafetyNetPass. Once configured the battery, the centered time etc ...
Finally no need for the Center Clock and SafetyNetPass mods, but I still flash the G-Visual mod for the Phil style bar and round corner function which has more configuration options.
No bootloop & problems everything is ok great

Latest update straight made gapps force close,
Anything using google services for login will force close, gmail, offer up, google app, ect
I cleared data and cache for those apps and problem still persists
Any help would be appreciated, I'd rather not have to factory reset my phone