I have a carrier unlocked TMOBILE S8+ , not rooted, Is it possible to flash firmware of verizon or an unlocked firmware and move my service to VERIZON? please help! thanks, do i need to root?
Why would you need to flash anything other than wanting certain carrier apps? You just said that your phone is carrier unlocked. Which means you can take it to a different carrier.
Hello,
I have called Sprint many times, after they keep telling me it is unlocked domestically and internationally, I finally gave up. The phone simply says to contact sprint to unlock. I have no idea what to do. When I press UCCI Unlock it gives me an internal error(407). I tried flashing unlocked firmware (U1) But it does not work on that either. Tried booting up with T-Mobile sim inside, still same result. What to do?
Please help!
I had the same problem. I did a factory reset of my phone, and afterwards, the phone was automatically unlocked. For me, it seemed like a firmware bug.
Hi all. After the phone get unlocked, flash the U1 firmware and you'll be just fine. On the U1 firmware, T-Mobile is the only US carrier network that utilize the full potential of the U1 firmware, Wi-Fi calling and VoLTE. Verizon second with VoLTE, Sprint and AT&T no ? good on U1 firmware, only standard U firmware. Happy flashing
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
toronado13 said:
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
Click to expand...
Click to collapse
Did you have to flash to the U1 software first?
I do think that is what I ended up doing... tried to go directly first and it kept failing. Got fed up and decided to just try and put the bone stock rom on it, and that went on really easily.... so after using it like that a few days I tried to drop the ATT rom on it and it worked without issue.
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
Yes, but you need to go to the u1 firmware 1st then to the other carrier firmware. Also make sure you avoid the newer firmwares with the new bootloader, as the unlocked model and certain carrier models don't have the new bootloader.
*Detection* said:
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
Click to expand...
Click to collapse
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
elliwigy said:
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
Click to expand...
Click to collapse
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
*Detection* said:
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
Click to expand...
Click to collapse
I tried downloading vzw firmware G960USQS3ARI6 to my unlocked sprint s9 and still not vzw flashed. want to do this so can have voice over LTE. Any other steps im missing? flash went through but still sprint
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA. ?
HAPPY FLASHING!
nickosarus2008 said:
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA.
HAPPY FLASHING!
Click to expand...
Click to collapse
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Curtis2018 said:
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Click to expand...
Click to collapse
Well first off, you have the unlocked phone. I don't. My G960U is originally from Sprint, so I'm not sure about carrier flashing regarding the G960U1. I thought it was supposed to provision itself after you put the sim in, and the associated carrier apps will download since it's the unlocked model...but I may be wrong...
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
I know so many people have already answered your question from some saying No to others saying Yes but you need to Install U1 first and Bla Bla Bla.
I want to give you one specific answer: With S9 you can any Carriers firmware you wish or even Unlocked phone's firmware. You will never have any issue. And you don't ever need to flash U1 or something else before changing carrier firmware you can Flash from ATT S9 firmware to VZW S9 firmware without any issue. You can also flash from U to U1 which is from Carrier specific to Unbranded/Unlocked but only hiccup is original Odin will give you SHA-256 error, which is normal because you are flashing U1 firm to U device or vice versa. This error can easily be resolved by used Patched odin that disabled SHA-256 check. And trust me you will never have any issue.
You will never want to do this but I have gone as far as mix-matching U and U1 firmware together as well. Like flashing AP, BL and CP of U device but flashing CSC of U1 device. and it still works.
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
---------- Post added at 03:08 AM ---------- Previous post was at 02:57 AM ----------
ret4425 said:
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
Click to expand...
Click to collapse
well, I tried to load the Sprint image from the VZW, no dice. It said it passed, but upon reboot loaded up the old Big Red (even with the Sprint SIM in it).
Anyone have any ideas? This is driving me insane....
I got Note 10+ 256gb unlocked version from Samsung. Planning on using it on Tmobile. Do I need to do anything specific to make it more compatible with Tmobile. I've currently unlocked s10e on Tmobile and overall network coverage seems bit subpar compared to Galaxy S8 that I purchased from Tmobile.
So I'm just curious if I need to do anything for Note 10+ ince I get it, to make it more network friendly.
Sent from my SM-G970U1 using Tapatalk
Download the tmobile firmware from sam mobile and odin it to your unlocked.
I googled it but didn't have luck. Any chance there is a link to the T-Mobile firmware?
stu5797 said:
I googled it but didn't have luck. Any chance there is a link to the T-Mobile firmware?
Click to expand...
Click to collapse
It's not up on Sammobile yet...
But it is on samfrew
https://samfrew.com/download/Galaxy__Note10+__256GB__/c3pb/TMB/N975USQU1ASGO/N975UOYN1ASGO/
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
I just flashed my Note 10+ with TMB fimware and it all went fine. here is the link from Sammobile https://www.sammobile.com/samsung/galaxy-note-10-plus/firmware/SM-N975U/
marctronixx said:
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
Click to expand...
Click to collapse
It doesn't really matter. The storage size doesn't affect the firmware. It's all the same.
Flashing the carrier firmware will factory reset your device, so I wouldn't waste time setting it up first. Just put your SIM in and let it provision for T-Mobile. It happens automatically so there's nothing you have to do. Then flash the firmware with ODIN.
Just research and make sure you know what you're doing before flashing. ODIN is fairly fool proof, but it's still best to know what you're doing first.
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
I thought you can flash without messing with your data.
stu5797 said:
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
I thought you can flash without messing with your data.
Click to expand...
Click to collapse
Technically you can flash without messing data but will be difficult to identify the reasons if you encounter any issues after that. So its better to flash it now itself when its freshly out of the box
I was going to update the Unlocked firmware via OTA software update. Once I receive the update I will then flash the Tmobile firmware via Odin
marctronixx said:
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
Click to expand...
Click to collapse
Just received my unlocked Note10+ 512GB an hour ago and, as was the case with my unlocked Note9, it works great out of the box with T-Mobile and Mint (a discount reseller). No custom flashes needed unless you want the TMO bloatware. I would leave it as-is and just download the respective carrier apps individually. Love this BEAST so far! :good:
I bought the note 10+ and i'm on the tmobile network. The only issue I'm having is VOLTE. To my knowledge VOLTE should work. Can anyone confirm this?
sm-g975u unlocked att phone wanting to change to tmobile. I have a tmobile sim and had originally plugged this in. The phone works fine but I recently noticed it has no Ota updates occurring. I would like to load tmobile firmware on it to enable some of the tmobile features as well but primary concern is ota updates.
the service provider sw ver.
SAOMC_SM-G975U-OYN-AT-PP-0033
ATT/ATT/ATT
BUILD NUMBER
PPR1.180610.011.G975USQS1ASD9
Ap/CP:G975USQS1ASD9
Csc:G975UOYN1ASD9
Last update may 2019
When I try says fully updated when I put it on samsung switch it says fully updated
Can this be done?
What firmware do you suggest?
Csc *#272imei#(may have that wrong) but is recognized and does work not sure when and what to use here, many options.
Also, not sure of the answer here, but if I run an update or csc change (the phone is unlocked) would it require me to unlock it again for any reason?
I am trying to get the phone close to a tmobile if that is possible
Thank you in advance if i need to give more info please let me know.
Download the firmware of your current network and flash you will begin to receive updates. However you can also flash the unbranded one which is G975U1 and you will still receive updates too
Can you give directions on how to get the firmware for the current network and how to flash the phone? I have an SM-G975U that is on SPR that I need to get to ATT so it will get updates from cricket. I have found a lot of materials on the internet and not a single one shows all of the steps clear enough for me to risk blowing up my phone. I have found the SPR files and TMK, and USA, and TMB, but no ATT.