Develop Bugs

Problems rooting, adb etc.

Hello, I've tried rooting my Nexus 7 (2013) with LTE for like 5 hours now...
I've done every single thing in every single thread, and I still can't do ****.
I've tried the WugFresh root toolkit, but that did not work at all for me, I uninstalled and remove what they told me to do... But nothing worked, when I followed the WugFresh toolkit I lost usb mass storage... N7 did not appear at all on my computer, which it did, before I tried to screw with it...
I've tried doing it the manual way too, downloading all the drivers, uninstalling the other onces first.. But nothing... I could not even get the device listed in adb! I tried the full driver installation thing + automatic check if everything worked out, but the tablet would NOT run the script to reboot it into fastboot, and when I tried to restart the tablet into fastboot, and then continue to run the toolkit, it would start TWRP, the popup on my computer told me to flash something "!flashready", but I could not find it in the sdcard...
I unlocked the n7 manually, holding the volume button and power button down.
I know that was very bad written, but I'm a bit in a hurry. Anything I could do?

Potetsjokolade said:
Hello, I've tried rooting my Nexus 7 (2013) with LTE for like 5 hours now...
I've done every single thing in every single thread, and I still can't do ****.
I've tried the WugFresh root toolkit, but that did not work at all for me, I uninstalled and remove what they told me to do... But nothing worked, when I followed the WugFresh toolkit I lost usb mass storage... N7 did not appear at all on my computer, which it did, before I tried to screw with it...
I've tried doing it the manual way too, downloading all the drivers, uninstalling the other onces first.. But nothing... I could not even get the device listed in adb! I tried the full driver installation thing + automatic check if everything worked out, but the tablet would NOT run the script to reboot it into fastboot, and when I tried to restart the tablet into fastboot, and then continue to run the toolkit, it would start TWRP, the popup on my computer told me to flash something "!flashready", but I could not find it in the sdcard...
I unlocked the n7 manually, holding the volume button and power button down.
I know that was very bad written, but I'm a bit in a hurry. Anything I could do?
Click to expand...
Click to collapse
So the current condition of your device is that ADB is nonfunctional but you are able to temporarily boot into TWRP with fastboot - is this correct?

Username invalid said:
So the current condition of your device is that ADB is nonfunctional but you are able to temporarily boot into TWRP with fastboot - is this correct?
Click to expand...
Click to collapse
Yes, that is correct, temporarily, with the toolkit I mentioned. But I do not find the files that the toolkit tells me to flash

Potetsjokolade said:
I've tried doing it the manual way too, downloading all the drivers, uninstalling the other onces first.. But nothing... I could not even get the device listed in adb! I tried the full driver installation thing + automatic check if everything worked out, but the tablet would NOT run the script to reboot it into fastboot, and when I tried to restart the tablet into fastboot, and then continue to run the toolkit, it would start TWRP, the popup on my computer told me to flash something "!flashready", but I could not find it in the sdcard...
I unlocked the n7 manually, holding the volume button and power button down.
Click to expand...
Click to collapse
I'm not sure what this means. If you're using a toolkit, you're not doing it manually. Have you tried ADB and fastboot alone, without a toolkit? Is TWRP on your phone now? If so, you're done; just flash from recovery 1) a ROM for a custom ROM or 2) SuperSU.zip for just root.
If you don't have TWRP, does your Google boot screen has a locked icon at the bottom? If so: for ADB to work you need to have debugging turned on in your phone's developer settings. You don't need ADB though; just reboot into the bootloader by holding power and volume-down. Then type "fastboot devices" and see if anything shows up.
If it's an unlocked icon, just flash a recovery.img from fastboot.

bananagranola said:
I'm not sure what this means. If you're using a toolkit, you're not doing it manually. Have you tried ADB and fastboot alone, without a toolkit? Is TWRP on your phone now? If so, you're done; just flash from recovery 1) a ROM for a custom ROM or 2) SuperSU.zip for just root.
If you don't have TWRP, does your Google boot screen has a locked icon at the bottom? If so: for ADB to work you need to have debugging turned on in your phone's developer settings. You don't need ADB though; just reboot into the bootloader by holding power and volume-down. Then type "fastboot devices" and see if anything shows up.
If it's an unlocked icon, just flash a recovery.img from fastboot.
Click to expand...
Click to collapse
Tried both manually with adb, and with WugFresh toolkit. I got WugFresh to run TWRP temporarily.

Potetsjokolade said:
Yes, that is correct, temporarily, with the toolkit I mentioned. But I do not find the files that the toolkit tells me to flash
Click to expand...
Click to collapse
The toolkit is using the command
Code:
fastboot boot openrecovery-twrp-2.6.3.0-deb.img
to temporarily boot it over the stock recovery. Since you unlocked your bootloader manually, you can replace the stock recovery manually too using
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img

Username invalid said:
The toolkit is using the command
Code:
fastboot boot openrecovery-twrp-2.6.3.0-deb.img
to temporarily boot it over the stock recovery. Since you unlocked your bootloader manually, you can replace the stock recovery manually too using
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img
Click to expand...
Click to collapse
How can I do that when my N7 does not show up on
adb devices
Click to expand...
Click to collapse
Getting "waiting for device"

Potetsjokolade said:
How can I do that when my N7 does not show up on
Click to expand...
Click to collapse
Fastboot is separate from ADB. Your fastboot is working if the toolkit is able to boot TWRP.
Code:
fastboot devices
is what you use while your device is in the bootloader.

Username invalid said:
Fastboot is separate from ADB. Your fastboot is working if the toolkit is able to boot TWRP.
Code:
fastboot devices
is what you use while your device is in the bootloader.
Click to expand...
Click to collapse
Great! I'll try that, just upoading openrecovery-twrp-2.6.3.0-flo.img to dropbox, just in case I'm able to flash it from download/

Potetsjokolade said:
Great! I'll try that, just upoading openrecovery-twrp-2.6.3.0-flo.img to dropbox, just in case I'm able to flash it from download/
Click to expand...
Click to collapse
openrecovery-twrp-2.6.3.0-flo.img is for the WiFi model. TWRP for the LTE model is openrecovery-twrp-2.6.3.0-deb.img.

Username invalid said:
The toolkit is using the command
Code:
fastboot boot openrecovery-twrp-2.6.3.0-deb.img
to temporarily boot it over the stock recovery. Since you unlocked your bootloader manually, you can replace the stock recovery manually too using
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img
Click to expand...
Click to collapse
Where in windows should I paste openrecovery-twrp-2.6.3.0-deb.img, so I can then flash it? It showed up in fastboot devices
EDIT: Nevermind that stupid question

Potetsjokolade said:
Where in windows should I paste openrecovery-twrp-2.6.3.0-deb.img, so I can then flash it? It showed up in fastboot devices
Click to expand...
Click to collapse
C:\Program Files\WugFresh Development
Then in toolkit > Advanced Utilities > Launch CMD Prompt > "fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img"

Username invalid said:
C:\Program Files\WugFresh Development
Then in toolkit > Advanced Utilities > Launch CMD Prompt > "fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img"
Click to expand...
Click to collapse
Flashed custom recovery + superSU
Thanks guys... Could you help me solve the problem where Nexus 7 wont show up on "my computer"? :laugh:

Potetsjokolade said:
Flashed custom recovery + superSU
Thanks guys... Could you help me solve the problem where Nexus 7 wont show up on "my computer"? :laugh:
Click to expand...
Click to collapse
What do you see if your computer Device Manager with USB Debugging on?

Username invalid said:
What do you see if your computer Device Manager with USB Debugging on?
Click to expand...
Click to collapse
It's connected as MTP, USB Debugging is on, and it does not show up on My Computer as Nexus 7
However, if I connect it as as PTP, it will show up.

Potetsjokolade said:
It's connected as MTP, USB Debugging is on, and it does not show up on My Computer as Nexus 7
However, if I connect it as as PTP, it will show up.
Click to expand...
Click to collapse
I've never had that problem so I can't speak from experience.
http://forum.xda-developers.com/showthread.php?t=2428061&highlight=mtp
http://forum.xda-developers.com/showthread.php?p=44219641#post44219641

Help I bricked my Oneplus 3

Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))

have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.

bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)

Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs

bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?

Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"

Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?

ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol

bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?

gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs

Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))

Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?

Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..

jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english

Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.

can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!

fastboot never start after update to android 6

Hy
I had an unlocked bootloader phone. Yesterday I flashed the new Android 6, Europe version from the Huawei blog forum, no beta, on my Huawei GX8. I used the method, dload on SD card, Phone off an the press Volume down+volume up+Power button.The flashing was normaly.
Now the phone starts normaly but I can´t start fastboot. When the phone is off and i press Vol down + Power the phone start the android system and the Huawei logo is coming not the fastboot Modus. I can see my phone and the order under Windows but i can not control my phone with the fastboot command. (example: fastboot device. the answere ist searching devices, but it comes no resolution) I loaded the last version of Fastboot, but the problem is the same.
Please can you help me. What can i do? Many thanks for your help!

Should be connect the charger cable to the phone.
charger or computer
excuse me for bad english

No i use a data cable, debugging is on. I can copy data from my phone to PC or from PC to phone, but fastboot does not found my device.

bertl237 said:
No i use a data cable, debugging is on. I can copy data from my phone to PC or from PC to phone, but fastboot does not found my device.
Click to expand...
Click to collapse
And when you use adb to reboot to bootloader, what happen? Do you have "Minimal adb and fastboot tool" installed?

krispin said:
And when you use adb to reboot to bootloader, what happen? Do you have "Minimal adb and fastboot tool" installed?
Click to expand...
Click to collapse
Sorry for my question, what´s the differents about adb and fastboot tool? I have install the last version of minimal adb and the fastboot tool, also the Windows driver for the phone. Debugging is on. I try to connect my phone about the fastboot terminal. When i try to set the phone into the bootloader mod with the fastboot terminal and the equivalent command, fastboot say´s "searching phone". My phone does not react.

bertl237 said:
Sorry for my question, what´s the differents about adb and fastboot tool? I have install the last version of minimal adb and the fastboot tool, also the Windows driver for the phone. Debugging is on. I try to connect my phone about the fastboot terminal. When i try to set the phone into the bootloader mod with the fastboot terminal and the equivalent command, fastboot say´s "searching phone". My phone does not react.
Click to expand...
Click to collapse
So, you connect your phone, open minimal adb and fastboot too, run "adb devices", you see device id? If yes, run "adb reboot bootloader" . Phone shoult reboot to fastboot mode. Then run "fastboot devices" to see if it is connected properely.

i did it, like you described, but i see not my device id. Only the note "seach device"
Is it possible that TWRP is defect on my device? Is TWRP necessary for fastboot or only for root?

bertl237 said:
i did it, like you described, but i see not my device id. Only the note "seach device"
Is it possible that TWRP is defect on my device? Is TWRP necessary for fastboot or only for root?
Click to expand...
Click to collapse
No, you should be able to use adb and fastboot with stock recovery.
After first adb command you shoult approve authorization on your phone.

Here is screenshot from minimal adb...
Phone must be in MTP mode.

And here is phone in fastboot

Many thanks for your help, now I m in my bootloader.
2 problems i had.
1. My daemon was not started correctly, i have not seen my device.
2. I used the wrong command. I started with fastboot, not with the command adb device. I tap „fastboot reboot-bootloader“,but the correct command is “adb reboot-bootlader“
Now i have seen my phone is unlocked, i hope i can root my android 6.

bertl237 said:
Many thanks for your help, now I m in my bootloader.
2 problems i had.
1. My daemon was not started correctly, i have not seen my device.
2. I used the wrong command. I started with fastboot, not with the command adb device. I tap „fastboot reboot-bootloader“,but the correct command is “adb reboot-bootlader“
Now i have seen my phone is unlocked, i hope i can root my android 6.
Click to expand...
Click to collapse
Just reboot to fastboot and flash surdu-petru version of TWRP recovery 3.0.2 with command "fastboot flash recovery xxxxx.img". And than reboot to recovery and flash supersu zip.

How to wipe android partitons while NO access to Fastboot? PLZ help

Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill

TowChill said:
Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill
Click to expand...
Click to collapse
Here you can find a recovery guide:
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
I'd recommend methode 2, because it seems more east to do.
Good luck!

TowChill said:
Hi,
I have a unique problem. I cant go into fastboot. Yes, fastboot on my OPT is not a opltion.
I cant instal TWRP. I can't wipe the OS to flash a new one.
My question is this:
Is there a way to wipe the partitions on a android phone via windows or something?
This problem is created by me. Somehow I flash OOS over CM (??)
So when my phone boots (bootloader is unlocked) I will see 2 boot sequences wich prevents me from accesing the fastboot menu.
The solution I see is this: Enter TWRP --> Wipe all but USB-OTG ...
Anyway, I hope there is a android Einstein here because I'm at a loss..
Feel free to ask any questions and pls help me!
Grt TwoChill
Click to expand...
Click to collapse
If you are getting two boot screens, please confirm if this is what you see in your first boot screen:
some text which goes like "Your device cannot be trusted etc etc. fastboot oem lock something something"
If yes, press the volume buttons at this screen, which will take you to an "Options menu"
This will have options to power off, restart, recovery, fastboot, back to previous page.
use volume down buttons to move selection to fastboot and press power button to select fastboot.
This will take you to bootloader.
Alternatively:
Is the device getting identified by your computer when connected?
If yes, and if you have adb tools installed, try this command, after connecting to computer and selecting usb configuration as transfer files
adb devices
The result of this should show your device
then type:
adb reboot bootloader
This should take you to your bootloader screen.

pvramk said:
If you are getting two boot screens, please confirm if this is what you see in your first boot screen:
some text which goes like "Your device cannot be trusted etc etc. fastboot oem lock something something"
If yes, press the volume buttons at this screen, which will take you to an "Options menu"
This will have options to power off, restart, recovery, fastboot, back to previous page.
use volume down buttons to move selection to fastboot and press power button to select fastboot.
This will take you to bootloader.
Alternatively:
Is the device getting identified by your computer when connected?
If yes, and if you have adb tools installed, try this command, after connecting to computer and selecting usb configuration as transfer files
adb devices
The result of this should show your device
then type:
adb reboot bootloader
This should take you to your bootloader screen.
Click to expand...
Click to collapse
Thank you for your replay.
I have done all of this and i do understand how this works.
I have adb drivers installed, my computer does reconizes my phone and everything works even the reboot to bootloader via CMD. (adb devices, it shows, etc)
When my phone then tries to access the bootloader, it will show those messeges " this devices cant be trusted etc etc." afther 5 seconds again I see the the android logo (with a few lines of static on the bottom) (( that clearly is not right )) but it will show me again the same message " this devices cant be trusted etc etc" ... then it will just show me the battery icon and power precentage (this if I choose to boot to bootloader) or else it starts normally..
Clearly the flashing of CM failed. And with a sideload to install OxygenOS I can use it.. But it does prevents me from accessing the fastboot mode..
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.

TowChill said:
Thank you for your replay.
I have done all of this and i do understand how this works.
............
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.
Click to expand...
Click to collapse
well if you are rooted you can try using an app called flashify or flashfire to install twrp

pvramk said:
well if you are rooted you can try using an app called flashify or flashfire to install twrp
Click to expand...
Click to collapse
Thanks! Unfortunatly my phone isn't rooted anymore ..
I'm screwed right?

TowChill said:
Thanks! Unfortunatly my phone isn't rooted anymore ..
I'm screwed right?
Click to expand...
Click to collapse
When the display shows the battery % check if fastboot devices shows your device?
If not I'm sorry, I would not be of any more help to you my friend.
Hope someone more knowledgeable comes along and clears your problem....

TowChill said:
Thank you for your replay.
I have done all of this and i do understand how this works.
I have adb drivers installed, my computer does reconizes my phone and everything works even the reboot to bootloader via CMD. (adb devices, it shows, etc)
When my phone then tries to access the bootloader, it will show those messeges " this devices cant be trusted etc etc." afther 5 seconds again I see the the android logo (with a few lines of static on the bottom) (( that clearly is not right )) but it will show me again the same message " this devices cant be trusted etc etc" ... then it will just show me the battery icon and power precentage (this if I choose to boot to bootloader) or else it starts normally..
Clearly the flashing of CM failed. And with a sideload to install OxygenOS I can use it.. But it does prevents me from accessing the fastboot mode..
So Is there an alternative way to install TWRP without using the fastboot mode? Or is there an other way i can try to wipe the partitions inc. the os?
From there I know what to do.
Click to expand...
Click to collapse
If nothing works, try method 2 from the Hard Brick guide from Naman Bhalla.

problem with fastboot twrp flashing

my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.

Nazukii said:
my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.
Click to expand...
Click to collapse
try upgrade your android sdk on your pc

Nazukii said:
my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.
Click to expand...
Click to collapse
Well if you already had adb in your pc, rename the twrp file to recovery, you don't have to move the twrp from download folder, open download folder press shift and right click then select open cmd here, on cmd type "adb device" to see if your device connected, then after that type this "fastboot flash recovery recovery.img" press enter than after that type "fastboot boot recovery.img" TEAMWIN logo should appear on your device and then you can unplug your device. Hope this useful

i am trying to flash twrp there is no folder called adb i have installed the 15 second adb and all so i have got this minimal adb flashboot and i tried with that and got this ---- FAILED (remote: Flashing is not allowed in Lock State). i have granted all usb and oem unlocking. please help with this

Phone shows unlocked during the boot?
I had the same Problem,after a Factory Reset works for me.
I am on Miglobe-Rom Miui10 8.6.28.
Minimal ADB is enough.
Or use this from Attachment.
Unpack with Win.zip and copy Twrp in this Folder.
Conect the Phone with your Pc ,boot into Bootloader and click "cmd-here.exe"
Use this Command
fastboot flash recovery twrp-3.2.1-3-whyred.img

@Nazukii - Quick question - any chance you could try running GameBench on your device, and see if our background service dies when the device is disconnected from the PC? I don't have a Note 5 Pro to test, and I've got some user complaints. Any assistance would be awesome!
J

gamebenchjake said:
@Nazukii - Quick question - any chance you could try running GameBench on your device, and see if our background service dies when the device is disconnected from the PC? I don't have a Note 5 Pro to test, and I've got some user complaints. Any assistance would be awesome!
J
Click to expand...
Click to collapse
Have you fixed your app to run on Magisk-SU ?

otonieru said:
Have you fixed your app to run on Magisk-SU ?
Click to expand...
Click to collapse
Hey Otonieru,
Not yet, but I've got one of the engineers working on it - hopefully it'll be up in the next 30 days or so

Same problem here after updating my gcam was not working was enabling hall again but it is not booting into twrp

Redmi Note 5 pro
So my Bootloader is locked,
My phone stuck in MI recovery idk how.
I cant install MIUI via fastboot. Im stuck ..
Can anyone please help me here not sure how to proceed further.

If you have made sure that you have all the drivers installed and still have not solved, you need to use an Intel-based PC / notebook and use a usb 2.0.

”Well if you already had adb in your pc, rename the twrp file to recovery, you don't have to move the twrp from download folder, open download folder press shift and right click then select open cmd here, on cmd type "adb device" to see if your device connected, then after that type this "fastboot flash recovery recovery.img" press enter than after that type "fastboot boot recovery.img" TEAMWIN logo should appear on your device and then you can unplug your device. Hope this useful”
i did that but it is showing failed（too many links）and "press any key to reboot" showing on my phone's fastboot screen

Fastboot boot recovery.img flashing problem on Redmi note 5 pro
My bootloader is unlocked and my oem as well as usb deb is on. After i connect my phone in fastboot mode to my pc. The cmd shows fastboot devices but when it comes to fastboot boot recovery.img flashing device get disconnected. Plzzzzzz let me know a solution for this. A solution for this will be highly appreciateable.