Related
Hi every one !
I'm using the Belgian firmware with a Wave 2 TLBLB1 and I'm getting some strange errors after an upadte :
- The boot screen is reversed
- The boot animation is played in reverse
(just annoying)
- After doing the Samsung apps update it can't launch it says : " Impossible to launch (...) invalid app"
I tried several times to hard reset and recover a clean bada but after each samsung apps update the same error appear.
Does some know from where those errors come from ?
Thanks in advance.
Solution :
- Do a hard reset
- Don't recover your settings files and apps
- Do the update
Solution 2, thanks to mylove90 :
-Try removing it by deleting its folder with TK file explorer (edit ini file to make it work with bada 2.0)
-Copy Samsung Apps.oap file....i'll assume you know the path of that file
-Open it with 7z or any other program
-Edit manifest.xml file to give it higher version number
Click to expand...
Click to collapse
Are you updated your phone via OTA ?
Yes it was an OTA update. But apart from the bug I listed, everything works fine.
Exactly Don't know about samsung apps but Reversed also for me as this
http://forum.xda-developers.com/showpost.php?p=25923810&postcount=119
hahahahahahahahaha
These bugs are so funny
Thanks to Samsung we don't have OTA updates in Egypt
But i guess that you just got a bad Samsung Apps update
-Try removing it by deleting its folder with TK file explorer (edit ini file to make it work with bada 2.0)
-Copy Samsung Apps.oap file....i'll assume you know the path of that file
-Open it with 7z or any other program
-Edit manifest.xml file to give it higher version number
In Theory , This should prevent the update & make your Samsung Apps work
Best Regards
Yeah it's exactly the same... It should be normal for Samsung that the phone boot that way...
Could it be a general error from the OTA system update ?
For the samsung apps I expect the same bug since it was also with an OTA update.
Edit : yes I will try later this method I don't have time to do it right know I will report when I did it.
Edit 2 : So I hard reset and try again to update and it works even after the update. But after recovering my files it bugs. I will try to recover before updating.
Just a simple/noob question how do you express the files into a .oap file ?
Edit 3 : WTF it works. It should have been a setting error. Strange.
This is NO bug...
This is VISUAL teststuff...
Firmware like XXKKV... XXLAV, XXLBV
These are for internal testing... it is easier to see if success, instead wait and enter *#1234#
Read here:
http://forum.xda-developers.com/showthread.php?t=1363328
Remember... as V is highest "Character/Digit"... Kies nor OTA update again...
You have minimum to flash other apps_compressed.bin with Multiloader.
Best Regards
adfree said:
This is NO bug...
This is VISUAL teststuff...
Click to expand...
Click to collapse
Thanks I didn't know.
Anyway it works great. I'll wait untill next firmware.
I DO NOT TAKE CREDIT FOR THE WORK. I ONLY TRANSLATED THE SCRIPTS TO ENGLISH .
I AM NOT RESPONSIBLE IF YOU BRICK OR BREAK YOUR FUJITSU.
I have managed to find a bat file which will allow you to root your F-02E japanese phone.
I have also found a script to allow system R/W made by kikuhare
Steps Involved:
Make sure your phone has 100% charge.
Download the Root + System Mount
Extract the zip's to different folders.
Enable USB debugging under Menu > Settings > Developer Options.
Point to the folder where you extracted drivers from "usb_driver_F-02E_1.0.zip". Wait for drivers to install.
Make sure the phone is connected as PTP not MTP.
CMD into the folder "f-02e_oneclick_su_installer". It is inside the "Root + System Mount_1" files folder.
Run the runme.bat.
Download "Root Checker by joeykrim" from the Play Store.
Run the "Root Checker" app
Wait for the process to finish.
UPDATE System R/W
Connect phone to computer
Download the System Read Write Mounter_1.zip <<<<<< Only need to download if you did not download the "Root + System Mount_1.zip" file.
CMD into the "F-02E_system-mounter" It is inside the "Root + System Mount_1" files folder.
Extract the file and run the"START.bat"
Run everytime the system restarts to mount system as R/W.
Enjoy root .
NOTE: This method does not give full root permissions. You will still be able to underclock the CPU to some degree and use the CoreControl app to disable cores. I will have to run start.bat inside F-02E_system-mounter folder everytime the phone restarts to get system R/W
Drivers: usb_driver_F-02E_1.0.zip
Root Includes System Mount: Root + System Mount_1.zip
System R/W Mounter: System Read Write Mounter_1.zip
Screenshots:
Feel free to ask questions.
anaschillin said:
Hi, I have managed to find a bat file which will allow you to root your F-02E japanese phone. I do NOT take CREDIT for the work. I have merely found the zip. I have tested it and it works. I AM NOT RESPONSIBLE IF YOU BRICK OR BREAK YOUR FUJITSU.
Steps Involved:
Make sure your phone has 100% charge.
Extract the zip's to different folders.
Enable USB debugging under Menu > Settings > Developer Options.
Point to the folder where you extracted drivers from usb_driver_F-02E_1.0.zip. Wait for drivers to install.
CMD into the folder where you extracted the f-02e_oneclick_su_installer.zip files.
Run the runme.bat.
Download RootChecker from the Play Store. https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Reboot the phone.
Run the RootChecker app
Wait for te process to finish.
Enjoy root .
NOTE: This method does not give full root permissions. You will still be able to underclock the CPU to some degree and use the CoreControl app to disable cores.
Drivers:
http://www.4shared.com/zip/kGmw0Suu/usb_driver_F-02E_10.html?
Root: http://www.4shared.com/zip/D90h9kH2/f-02e_oneclick_su_installer.html?
Feel free to ask questions.
Click to expand...
Click to collapse
I havent even got the phone yet but are there any custom roms that work on this phone? Thanks
the-blind-bandit said:
I havent even got the phone yet but are there any custom roms that work on this phone? Thanks
Click to expand...
Click to collapse
No, not enough developers and interest for the phone outside Japan. I doubt anyone will be willing to put in effort as well
Oh well, but it is a very good phone, i think ill still get it though. I just wanted to know is half of it in Chinese even if you select english, i just heard this on youtube about another one of fujitsu's phones?
Sent from my Xperia T
the-blind-bandit said:
Oh well, but it is a very good phone, i think ill still get it though. I just wanted to know is half of it in Chinese even if you select english, i just heard this on youtube about another one of fujitsu's phones?
Sent from my Xperia T
Click to expand...
Click to collapse
Only Docomo and Fujistu apps are in Japanese. Everything else is in English.
Thats fine i suppose with root explorer i can delete those apps by deleting the apk in system app? Also if you have xposed app settings you can change the language per app would that also work?
Sent from my Xperia T
the-blind-bandit said:
Thats fine i suppose with root explorer i can delete those apps by deleting the apk in system app? Also if you have xposed app settings you can change the language per app would that also work?
Sent from my Xperia T
Click to expand...
Click to collapse
I have just frozen them, just incase if the phone needs the at somepoint. Xposed framework doesnt work as it need system R/W and the root method has not allowed system R/W mainly because the phone bootloader not unlocked. Secondly make sure you do not uninstall/disable the Phonebook and Phonebook Service provided by Docomo. Its key to allowing you to add and sync contacts.
So Xposed wont work at all then, thats a shame what about lucky patcher, does that need R/W?
Sent from my Xperia T
Improved the .bat file. Now you will have system R/W
Download the root file again and run it. Follow the steps starting at 10 if you have already rooted. :good:
Thanks
Sent from my Xperia T
anyone else besides the OP got their f02 rooted with this?
I may not be able to help any further. I have boot looped my phone. I cannot get it past the NTT Docomo screen. I think I know what is causing it but I cannot get the phone connected to the PC. I may need to send it into Fujitsu.
Good luck on fixing it
Sent from my Xperia T
I tried the following OP method didnt work for me
Thank! i just got the F-02e today. will try to root it.
btw, have you overcome a heating and self-shutting off prob on this phone?
anaschillin said:
Hi, I have managed to find a bat file which will allow you to root your F-02E japanese phone. I do NOT take CREDIT for the work. I have merely found the zip. I have tested it and it works. I AM NOT RESPONSIBLE IF YOU BRICK OR BREAK YOUR FUJITSU.
Steps Involved:
Make sure your phone has 100% charge.
Extract the zip's to different folders.
Enable USB debugging under Menu > Settings > Developer Options.
Point to the folder where you extracted drivers from usb_driver_F-02E_1.0.zip. Wait for drivers to install.
CMD into the folder where you extracted the f-02e_oneclick_su_installer-improved.zip files.
Run the runme.bat.
Download RootChecker from the Play Store. https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Run the RootChecker app
Wait for the process to finish.
UPDATE
Download ES File Explorer. Run it.
Press Menu then scroll down the list and click Root Explore.
Change the directory to root. (Meaning where you can see all system folders)
Look for system and hold the folder, then press more then properties.
Press Change in permissions.
Tick all the boxes at the bottom.
Enjoy root .
NOTE: This method does not give full root permissions. You will still be able to underclock the CPU to some degree and use the CoreControl app to disable cores. I have not been able to mount system as R/W and I had trouble installing BusyBox.
Drivers: usb_driver_F-02E_1.0.zip
Root: f-02e_oneclick_su_installer-improved.zip
Screenshots:
Feel free to ask questions.
Click to expand...
Click to collapse
anaschillin said:
I may not be able to help any further. I have boot looped my phone. I cannot get it past the NTT Docomo screen. I think I know what is causing it but I cannot get the phone connected to the PC. I may need to send it into Fujitsu.
Click to expand...
Click to collapse
i hope they can fix it immedietly, only you have work for this device (i hope any other)
question:
anyone have a stock rom for this device? may show me that's link?
Click to expand...
Click to collapse
Hi I am in the same situation, uninstall many applications in Japanese that I have the phone now in its box sirbe not all, send email to the seller took days with him and a solution is supposedly looking for me if I were to fix it passeth forums or sbrire a new post with the solution that would not be other than the original rom flaseo greetings
GattacaWroclaw said:
Hi I am in the same situation, uninstall many applications in Japanese that I have the phone now in its box sirbe not all, send email to the seller took days with him and a solution is supposedly looking for me if I were to fix it passeth forums or sbrire a new post with the solution that would not be other than the original rom flaseo greetings
Click to expand...
Click to collapse
You can reset the factory settings. Reboot the phone and hold the volume up, the phone will boot into recovery mode. You will be able to do a factory recovery.
armei said:
Thank! i just got the F-02e today. will try to root it.
btw, have you overcome a heating and self-shutting off prob on this phone?
Click to expand...
Click to collapse
I have not been able to overcome the issue. It is a design issue. Because it is waterproof phone the heat cannot disperse.
The only thing I have been able to do is keep the CPU frequency down to lower the time it takes for the phone to heat up.
garynsa said:
I tried the following OP method didnt work for me
Click to expand...
Click to collapse
What does it, when you run the root file?
Could you also tell your build number. Is it VR17xxx or VR16xxx?
I have a completely updated HP Elite X3 and have tried various ways to unlock the file system for modification with no success.
Does anyone know the proper way to unlock the file system on the HP Elite X3?
I've tried vcREG with no luck. Thanks All.
dfeldt91 said:
I have a completely updated HP Elite X3 and have tried various ways to unlock the file system for modification with no success.
Does anyone know the proper way to unlock the file system on the HP Elite X3?
I've tried vcREG with no luck. Thanks All.
Click to expand...
Click to collapse
could you please explain more what did you do ?
Witch version of vcREG dd you used ?
I'm prety sure you didn't check this post
http://forum.xda-developers.com/showpost.php?p=68479867&postcount=72
ngame said:
could you please explain more what did you do ?
Witch version of vcREG dd you used ?
I'm prety sure you didn't check this post
http://forum.xda-developers.com/showpost.php?p=68479867&postcount=72
Click to expand...
Click to collapse
Thanks for the response. I have followed the vcREG thread but did not do the part you just showed me with changing the name. I am attempting to do so in vcREG but it is not reading anything.
Would you mind telling me the steps to change the DeviceTargetInfo?
dfeldt91 said:
Thanks for the response. I have followed the vcREG thread but did not do the part you just showed me with changing the name. I am attempting to do so in vcREG but it is not reading anything.
Would you mind telling me the steps to change the DeviceTargetInfo?
Click to expand...
Click to collapse
You can use interop tools / custompfd or vcreg to modify this :
HKLM\System\Platform\DeviceTargetingInfo
Change the PhoneManufacturer to NOKIA
ngame said:
You can use interop tools / custompfd or vcreg to modify this :
HKLM\System\Platform\DeviceTargetingInfo
Change the PhoneManufacturer to NOKIA
Click to expand...
Click to collapse
Perhaps I am doing it wrong in vcREG.
Is this correct:
Open vcReg
Click Hkey_local_machine
Type path: HKLM\System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Hitting Read does nothing.
What are the steps to changing the Manufacturer in vcREG? Sorry to bug, I am a long time Android user and just moved to Windows for the first time. I appreciate the help!
dfeldt91 said:
Perhaps I am doing it wrong in vcREG.
Is this correct:
Open vcReg
Click Hkey_local_machine
Type path: HKLM\System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Hitting Read does nothing.
What are the steps to changing the Manufacturer in vcREG? Sorry to bug, I am a long time Android user and just moved to Windows for the first time. I appreciate the help!
Click to expand...
Click to collapse
Click Hkey_local_machine
Type path: System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
ngame said:
Click Hkey_local_machine
Type path: System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Click to expand...
Click to collapse
After doing exactly this, I hit read and nothing shows up. I have typed the path correctly. I'm not sure what is going on. I am going to try a complete reset and then do it again.
dfeldt91 said:
After doing exactly this, I hit read and nothing shows up. I have typed the path correctly. I'm not sure what is going on. I am going to try a complete reset and then do it again.
Click to expand...
Click to collapse
hm, so try to edit this with other registry app like custompfd .
I'm sure that works
ngame said:
hm, so try to edit this with other registry app like custompfd .
I'm sure that works
Click to expand...
Click to collapse
Thanks again for the help, I am currently restoring the phone using Windows Device Recovery Tool to start fresh. I will try CustomPFD and report back any progress.
I am trying to install CustomPFD and am getting error 0X81030120 now and it fails. This is on a fresh reset phone with no modifications other than enabling Developer Mode.
How do you install CustomPFD without getting the error?
I am using XAPdeployment to install.
@ngame Accessing normal registry still requires ndtksvc.dll in System32 running. @dfeldt91
Go to "Registry Editor for All Device".
http://forum.xda-developers.com/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
djamol said:
@ngame Accessing normal registry still requires ndtksvc.dll in System32 running. @dfeldt91
Go to "Registry Editor for All Device".
http://forum.xda-developers.com/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
Click to expand...
Click to collapse
I attempt to deploy the roottool.xap but it hangs and hangs and never installs.
I jsut noticed that in the Info section of the phone it now says ACERINC whch is one of the things I tried changing the phone registry to for manufacturer so......maybe I'm making progress here? I really don't know. Could not get either of the above to install.
Following it... only via W10 for desktop, no way for the remote registry editing via Windows 7 Professional?
djamol said:
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
Click to expand...
Click to collapse
The proper thread would actually be: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
The OP even includes instructions on how to unlock for other oem devices.
---------- Post added at 08:14 AM ---------- Previous post was at 08:09 AM ----------
dfeldt91 said:
Could not get either of the above to install.
Click to expand...
Click to collapse
Make sure you're reading the Interop Tools installation instructions carefully and that you're using the one from the official thread which is here: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
It should install properly
gus33000 said:
Make sure you're reading the Interop Tools installation instructions carefully and that you're using the one from the official thread which is here: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
It should install properly
Click to expand...
Click to collapse
When I install Interop tools on the X3 it does not show up anywhere, as an app or in the extras location.
Ok, link was posted. I downloaded the file and installed it. Now the problem I have is when installing interop tools. I copy to SD card, click the dependency files to install then install interop tools by clicking on it. It doesn't show up as an app and doesn't show up in extras.
dfeldt91 said:
When I install Interop tools on the X3 it does not show up anywhere, as an app or in the extras location.
also, that link has TBD written in the spot for the OEM files. So the files are unavailable.
Click to expand...
Click to collapse
I just updated the OP again. And where did you see it should be in extras? Don't follow or read the older thread that got posted, go to the storage settings, make sure interop tools isn't listed at all, if it is, uninstall it, then download the current pre-release 8 of beta 1.9, and read carefully the instructions. You are required to install using device portal. If it failed, device portal should give you a specific error code. Just make sure to follow the installation instructions from the official thread and everything should go alright.
Edit: reopen the thread and download the other missing ndtk spkgs zip too. Forgot to include it.
gus33000 said:
I just updated the OP again. And where did you see it should be in extras? Don't follow or read the older thread that got posted, go to the storage settings, make sure interop tools isn't listed at all, if it is, uninstall it, then download the current pre-release 8 of beta 1.9, and read carefully the instructions. You are required to install using device portal. If it failed, device portal should give you a specific error code. Just make sure to follow the installation instructions from the official thread and everything should go alright.
Click to expand...
Click to collapse
Ok, let me give this another shot! Thanks for the help, it is appreciated!
NDTK files
Ok, Got the NDTK files installed and it is restarting...
..OK.. Success. IT is installed, I can browse files from my PC and delete them. I deleted the system apps I don't use such as Xbox, Get Help, Continuum, etc. They immediately force close when clicked on in the start menu but do not disappear when the phone is restarted. I noticed the app files showed back up under Data\SYSTEMAPPS as well.
Does anyone know how to permanently remove these apps from the start menu?
Elite X3
hello just bought this baby and it seems a normal user can't do much **** with it.... Microsoft store askes for money even for word...lol
please be kind to help me how can I manage to install cracked apps if this is possible... I have read that normal win 10 exes don't work
also how can I root my device....
thanks
dfeldt91 said:
Ok, Got the NDTK files installed and it is restarting...
..OK.. Success. IT is installed, I can browse files from my PC and delete them. I deleted the system apps I don't use such as Xbox, Get Help, Continuum, etc. They immediately force close when clicked on in the start menu but do not disappear when the phone is restarted. I noticed the app files showed back up under Data\SYSTEMAPPS as well.
Does anyone know how to permanently remove these apps from the start menu?
Click to expand...
Click to collapse
hello ,
how can i remove starting verizon logo??? and i don,t want any other logos,
i just need like stock samsung boot, for note 4
remember i have not .zip file in media folder
Mr Hassan said:
hello ,
how can i remove starting verizon logo??? and i don,t want any other logos,
i just need like stock samsung boot, for note 4
Click to expand...
Click to collapse
You can use a app like this: https://play.google.com/store/apps/details?id=tkstudio.sboot to change boot animation or some ROMS like jasmine rom 7.0 have the original samsung logo boot sequence, for the app to work you need root and read carefully before doing anything. Hope this helps.
-spektor- said:
You can use a app like this: https://play.google.com/store/apps/details?id=tkstudio.sboot to change boot animation or some ROMS like jasmine rom 7.0 have the original samsung logo boot sequence, for the app to work you need root and read carefully before doing anything. Hope this helps.
Click to expand...
Click to collapse
thanks brother for reply i fixed this problem, now i,m in another project , i successfully extract the system,img,ext file,,,,now i edited somethings,
now i want to create again in same file, img,ext4
have you any idea about it?
Mr Hassan said:
thanks brother for reply i fixed this problem, now i,m in another project , i successfully extract the system,img,ext file,,,,now i edited somethings,
now i want to create again in same file, img,ext4
have you any idea about it?
Click to expand...
Click to collapse
Well if you mean like accessing and editing system files I'm not how to do edit them but I know that you can use a app like root explore: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer that's the free version the paid one is $3.99 in the US. With that you can move and add files to system folder you can edit permission of files and things of that nature.
-spektor- said:
Well if you mean like accessing and editing system files I'm not how to do edit them but I know that you can use a app like root explore: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer that's the free version the paid one is $3.99 in the US. With that you can move and add files to system folder you can edit permission of files and things of that nature.
Click to expand...
Click to collapse
ok brother thanks alot,
but i,m talking about stock rom, i already extracted and edit now its need to repack again
Mr Hassan said:
ok brother thanks alot,
but i,m talking about stock rom, i already extracted and edit now its need to repack again
Click to expand...
Click to collapse
Ah ok, so I found these two threads related to the subject one is for repackaging ODIN files if your using a Samsung: https://forum.xda-developers.com/showthread.php?t=2549712&page=5 and the other is a general tutorial on custom roms https://forum.xda-developers.com/showthread.php?t=2195858 Also this article covers mostly everything about creating and installing ROMS http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/ I hope this information helps I do not know much about creating or repackaging roms
-spektor- said:
Ah ok, so I found these two threads related to the subject one is for repackaging ODIN files if your using a Samsung: https://forum.xda-developers.com/showthread.php?t=2549712&page=5 and the other is a general tutorial on custom roms https://forum.xda-developers.com/showthread.php?t=2195858 Also this article covers mostly everything about creating and installing ROMS http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/ I hope this information helps I do not know much about creating or repackaging roms
Click to expand...
Click to collapse
ok again thanks,
i,m in samsung note 4 , and i found lot of threads to repack but not success, coz i,m counfuse about where i start?
and how, is that need just system folder or all file like hidden ,cache etc etc
Mr Hassan said:
ok again thanks,
i,m in samsung note 4 , and i found lot of threads to repack but not success, coz i,m counfuse about where i start?
and how, is that need just system folder or all file like hidden ,cache etc etc
Click to expand...
Click to collapse
Well system file is where all the data and software is at basically everything visible on the phone. Maybe this article could help it deals with modifying samsung rom and flashing it. If you want to read more on it here's the link: http://android.stackexchange.com/questions/85703/modifying-samsung-rom-and-flashing-it-on-a-device if you wanted to remove apps or add custom apps to your phone you would modify system file.
But what I thought was important was this;
(I did not write this thread)
< "You should be able to use an archive program on PC and recompress to .tar, .gz, and others. Dont forget to re-sign the archive. Keep a copy of your untouched ROM until you have the modified ROM tested and running.
The ROMs are signed with a signature. When repacking if they don't get signed they will fail in flashing. This link will help explain it.
So basically after downloading the firmware you have to rename it so you can extract the files, change them as you need, recompress them again and re-sign them, so you can flash them using Odin." >
This thread was dealing with modifying CM rom;
< "There are multiple solutions available:
Re-Zip the Image
Advantage: You do it once, and can use the resulting image for multiple devices. That's what I did with CM7.2 for my Milestone 2. Easy enough to do:
create a temporary (empty) folder
unzip the zip file to it
remove unwanted *.apk files from /system/apps (be careful of what you remove, of course)
zip up the directory contents again
Using a graphical ZIP manager (like WinZip or the like), steps would be even easier:
open the zip file with the archive manager
remove the unwanted .apk files
if the ZIP manager requires it, save the manipulated zip
Manually cleanup after flashing, using the shell
This is what ce4 recommended in the comments. It requires you using a terminal emulator on your device:
Flash the image as-is
remove superfluous stuff from the system partition by hand (like rm /system/big/junk/example.mp4)
Manually cleanup after flashing, using other tools
Almost the same as the previous method, but a bit more user-friendly. Disadvantage: this won't do for superflous ringtones and the like:
Flash the image as-is
Use a tool like Titanium Backup or Root Uninstaller to remove unwanted system apps" >
Edit: this link explains the signature of the file: (from google) https://code.google.com/archive/p/zip-signer/
-spektor- said:
Well system file is where all the data and software is at basically everything visible on the phone. Maybe this article could
Edit: this link explains the signature of the file: (from google) https://code.google.com/archive/p/zip-signer/
Click to expand...
Click to collapse
yes brother i want to remove some apps,. in system
even some edits in bulid prop
and after repack it for odin , thats it,
i create zip and trying to install the via twrp, during installation in end its give some error like this
setup finish with error 7 etc etc
so i reboot ,.....its reboot normal but after boot base band is unknown
i,m working on verizon devise.
in very simple words i,m trying to create rom without verizon apps and some more edits
and that all work in stock rom
Mr Hassan said:
yes brother i want to remove some apps,. in system
even some edits in bulid prop
and after repack it for odin , thats it,
i create zip and trying to install the via twrp, during installation in end its give some error like this
setup finish with error 7 etc etc
so i reboot ,.....its reboot normal but after boot base band is unknown
i,m working on verizon devise.
in very simple words i,m trying to create rom without verizon apps and some more edits
and that all work in stock rom
Click to expand...
Click to collapse
Ok so I may have found a solution for you it requires a pc and to download a program. You'll need your rom and any apps you would like to insert into it. The program is as simple as right click and delete for any apps you want to remove. The program is made by a developer on XDA named "_Logie" here's the link to the Web page: http://m.tech.firstpost.com/news-analysis/how-to-add-or-remove-apps-from-a-custom-rom-101986.html and the link to the program is on there or here's the direct link: http://www.solidfiles.com/d/da2dd6335d/
This program compiles the ROM into a .zip if you have TWRP recovery you could do a backup of your previous rom before flashing your current one because you'll have to completely wipe every main partition before flashing new rom to ensure you don't run into problems
Edit: backup system, data, and cache because those are the ones you'll need to wipe also before wiping them just in case I would remove any password that locks your phone because if you try to flash a new rom and fails and your left with the recovery file it'll mess up the password, fingerprints will be forget and backup password will be unchangeable and will require a factory reset to be able to change it.
-spektor- said:
.
Click to expand...
Click to collapse
Who its looking cool. I'll try tomorrow
But for now brother i want to know its remove the apps. OK and what about bulid.prop? I need to edit it also. And after edit i don't want root anymore .after edit i need in tar format
I know you think I'm made but i know it's possible
Mr Hassan said:
Who its looking cool. I'll try tomorrow
But for now brother i want to know its remove the apps. OK and what about bulid.prop? I need to edit it also. And after edit i don't want root anymore .after edit i need in tar format
I know you think I'm made but i know it's possible
Click to expand...
Click to collapse
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
-spektor- said:
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
Click to expand...
Click to collapse
Ok apps done
Bulid done
Now final thing need . repack in ext4 format
I'll check these things tomorrow
-spektor- said:
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
Click to expand...
Click to collapse
brother did you found anything for repack ext4 img?
Mr Hassan said:
brother did you found anything for repack ext4 img?
Click to expand...
Click to collapse
Have you tried this guide? https://forum.xda-developers.com/showthread.php?t=1588461
-spektor- said:
Have you tried this guide? https://forum.xda-developers.com/showthread.php?t=1588461
Click to expand...
Click to collapse
yes but its for linux , and for window 99% unsuccessfully rates , have you try in window ? this ?
now i,m in next step if you have the time so kindly share your experience
https://forum.xda-developers.com/android/help/repack-img-giving-error-odin-invalid-t3577719
Hmmmmm ? I think you want to change the boot animation (white Verizon logo red background? ) if so your gonna need to either need to flash a pre-made zip with Flashfire (can't seem to get it to apply from twrp) or your gonna need to manually copy into the appropriate directory (mount system directory r/w copy then change permissions of the file you copied to 644 and reboot) presumably with a root explorer though doable from terminal
---------- Post added at 07:47 PM ---------- Previous post was at 07:29 PM ----------
-spektor- said:
Ok so I may have found a solution for you it requires a pc and to download a program. You'll need your rom and any apps you would like to insert into it. The program is as simple as right click and delete for any apps you want to remove. The program is made by a developer on XDA named "_Logie" here's the link to the Web page: http://m.tech.firstpost.com/news-analysis/how-to-add-or-remove-apps-from-a-custom-rom-101986.html and the link to the program is on there or here's the direct link: http://www.solidfiles.com/d/da2dd6335d/
This program compiles the ROM into a .zip if you have TWRP recovery you could do a backup of your previous rom before flashing your current one because you'll have to completely wipe every main partition before flashing new rom to ensure you don't run into problems
Edit: backup system, data, and cache because those are the ones you'll need to wipe also before wiping them just in case I would remove any password that locks your phone because if you try to flash a new rom and fails and your left with the recovery file it'll mess up the password, fingerprints will be forget and backup password will be unchangeable and will require a factory reset to be able to change it.
Click to expand...
Click to collapse
Try flashing with flasfire enabling the option mount system r/w and use common paths (probably not necessary but won't hurt) I have had difficulty getting anything other than ROM and gapps to apply from twrp but flashfire seems to work . I'm thinking its due to the fact that flashfire flashes after boot loader and then resets prior to os load.
For those who are still waiting for a fix for the update error and don't want to undergo the recovery process, I found a different solution, which doesn't need a recovery operation on the phone.
I tested it with success on my 1020 and another 925 which were stuck in the CU build .297.
Keep in mind that the parameters that I will use are specific to these phone models, so if you have a different one you need to find the parameters specific to your phone model.
This is an heuristic procedure, tested on a limited number of phones, so use it at your risk, keeping in mind that you could have problems or need to recover your phone loosing all your data, so do a proper backup before.
Let's start.
The problem appears because, during update phase, the oeminput.xml file becomes corrupted: as far as I know it happens only on some x20 models, and not for all the users.
Now we're going to rebuild it...
Go to the following link
https://msdn.microsoft.com/en-us/library/windows/hardware/dn756630(v=vs.85).aspx
Copy the content of example file oeminput.xml: i.e. copy the content of the framed zone after the phrase "The following example shows the contents of a sample ProductionOEMInput.xml file"
Paste in a .txt file which you'll rename and change extension so that it becomes oeminput.xml. Save it with notepad.
Now modify the file
at the node <SOC>{PROCESSOR_NAME}</SOC> modify {PROCESSOR_NAME} fake parameter in order to have the processor name of your phone: for the 920/925/1020 use QC8960
at the node <Resolution>480x800</Resolution> instead of 480x800 use the resolution of your phone: for the 920/925/1020 use 768x1280
in all the nodes related to language <Language>en-US</Language> use the language of your phone: I used for example it-IT because I have the phone in Italian language.
Save the file.
Now if you still don't have interop tools installed (but I think you should have if you arrived to CU with an x20 phone model) install it.
Launch interop tools and then click this device and enable full file system access. Reboot your phone, connect it to a pc with cable: you'll see more directories than usual, because you also unlocked system dirs: be careful not to delete or modify any dir apart from what you find in this guide or you'll risk to damage your phone. If you want to find your usual dirs (docs photos...etc), go to phone\Data\Users\Public. I advise you that after the procedure I couldn't deactivate full file system access, because it continues re-activating in interop tools, maybe there is a way: but you can live with this, because you can find the usual dirs in the path that I specified...
Now go to phone\windows\imageupdate, make a backup on pc of the current oeminput.xml and overwrite it with the new one.
At this point in the phone go to settings, update and then search for updates: you should find Fall Creators Update...
Good Luck!
p.s. I didn't extensively search on the forum if a similar guide has been already posted, in the case sorry for the duplication.
Thanks to Antonio who has actively participated in the realization of this guide
sigfrid696 said:
https://msdn.microsoft.com/en-us/lib...(v=vs.85).aspx
Click to expand...
Click to collapse
The link is wrong
Thank you!
I modified it, now it should be ok!
friend can you share the oeminput.xml file that you used?
NeoTriXz said:
friend can you share the oeminput.xml file that you used?
Click to expand...
Click to collapse
Done! Let me know if it works...change only language to match your phone language and do a proper backup of your original file...
sigfrid696 said:
Done! Let me know if it works...change only language to match your phone language and do a proper backup of your original file...
Click to expand...
Click to collapse
no friend did not work, I keep throwing the same error, some idea that can be or another solution?
NeoTriXz said:
no friend did not work, I keep throwing the same error, some idea that can be or another solution?
Click to expand...
Click to collapse
At this point I think it's not a problem of corrupted oeminput file.
I googled around...not so many people having the problem...I found this link...
https://answers.microsoft.com/de-de...nd-eimem/0a6e1776-9005-40e8-a18e-9eaf0f35b648
It's in german language, but from what I understood the problem has been solved with Recovery Tool via pc: I know that's not the best solution, but maybe better than remaining without updates. Another significative information is that an hard reset alone doesn't solve the issue!
I hope that can be of any help...
sigfrid696 said:
At this point I think it's not a problem of corrupted oeminput file.
I googled around...not so many people having the problem...I found this link...
https://answers.microsoft.com/de-de...nd-eimem/0a6e1776-9005-40e8-a18e-9eaf0f35b648
It's in german language, but from what I understood the problem has been solved with Recovery Tool via pc: I know that's not the best solution, but maybe better than remaining without updates. Another significative information is that an hard reset alone doesn't solve the issue!
I hope that can be of any help...
Click to expand...
Click to collapse
thank you friend, for your time, but I already solved it, well I had to perform a hard reset,
does this works for lumia 520
and what parameter should i used for my lumia 520 Rm 914
i'm stuck on 15063.251
and my lumia finds fall cu update
but shows Error 0x80070273
does this really resolve this error
i could not able to copy paste it it shows you don't have permission
how i get permission
---------- Post added at 06:42 AM ---------- Previous post was at 06:22 AM ----------
it gives me this error
Yash Agarwal windows said:
does this works for lumia 520
and what parameter should i used for my lumia 520 Rm 914
i'm stuck on 15063.251
and my lumia finds fall cu update
but shows Error 0x80070273
does this really resolve this error
Click to expand...
Click to collapse
I think you should use for 520
<SOC>QC8227</SOC>
<Resolution>480x800</Resolution>
If you receive an error when you try to overwrite oeminput.xml, it means that your phone has not been unlocked for full filesystem access. Please refer to the guide in order to enable full filesystem access
thanks
it worked for me
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Donz7733 said:
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Click to expand...
Click to collapse
this error is get due to incorrect processor no or incorrect screen resolution
Donz7733 said:
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Click to expand...
Click to collapse
You can examine your oeminput.xml file and check if it is somehow not well-formed.
If that is the case you can use
<SOC>QC8926</SOC>
<Resolution>720x1280</Resolution>
Thanks for the reply guys.
I couldn't wait longer, so went with an reset. It updated fine after that.
Later came to know it was some server issue
how do you replace the xml file? it says copying but refuses to actually replace the file.
rancorx2 said:
how do you replace the xml file? it says copying but refuses to actually replace the file.
Click to expand...
Click to collapse
you should need completely interop unlock your device using interop tools
then restart your phone
then after it copies without error
Yash Agarwal windows said:
you should need completely interop unlock your device using interop tools
then restart your phone
then after it copies without error
Click to expand...
Click to collapse
how is complete unlock ??????????
I use interop tools
bloody_earth said:
how is complete unlock ??????????
I use interop tools
Click to expand...
Click to collapse
The error overwriting oeminput.xml happens when you haven't obtained full filesystem access.
In order to obtain full filesystem access:
Open Interop Tools, then this device, then Interop Unlock.
Check Full Filesysytem Access and restart your device.
Refer to this thread to download correct version of Interop Tools
https://forum.xda-developers.com/windows-10-mobile/tutorial-restore-glance-windows-10-t3540571
Let me know if you can solve the problem this way.