So I just got this phone just for fun, it was 75 USD, and went straight to XDA to root it so i can remove some bloat etc. but holy moly i ended up have 10 tabs with different guides open, i have compiled what I did to get this phone rooted.
I want to thank everyone who made different threads about rooting and installing Magisk on this phone, i have read so many guides now so i cant remember their names!.
BUT THANK YOU!.
Let's get to it
Here is what I did for to unlock the bootloader, install magisk and root my Huawei P20 Lite ANE-LX1
First you need to install HiSuite: https://consumer.huawei.com/minisite/HiSuite_en/
and then install ADB and Fastboot drivers: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
(extract the platform-tools folder to the root of your C: drive)
Plug in your phone and let it install drivers.
Then you need to downgrade your firmware to 146 using Dload method, as DCU Client can't read the bootloader unlock code on newer firmwares.
I used "Huawei P20 Lite ANE-L21 Anne-L21 8.0.0.146(C432) Firmware Android 8.0.0 EMUI 8.0.0 05014YXX androidhost.ru.zip" (https://androidhost.ru/6ti)
When finished downloading, open the zip file, open software and copy the folder "Dload" to the root of your EXTERNAL SD CARD, not internal storage!.
Now take your phone and "dial" *#*#2846579#*#* go to Software Upgrade -> SdCard Upgrade and click OK.
Your phone should now begin installing the old firmware, when the phone first boots up, dont set it up, turn it off and hold Volume up + Power and select Wipe Data/Factory Reset, Wipe Cache, and then reboot.
With the phone booted, enable USB Debugging (Settings > System > About Phone > version number > Tap it 7 times to become developer, AND click OEM-Unlock, then go to Settings > System > Developer Options > USB Debugging).
Now we need to buy 4 credits from DC-Unlocker (4 Euro) ( https://www.dc-unlocker.com/buy ) when you have 4 credits on your account, go and download https://hcu-client.com/download/hcu-client-v1-0-0-0287/ Password: hcu
extract the contents of the zip to a folder called HCU in the root of your C: drive
Open up HCU.exe, type in your username and password (check your mail, the info will be there).
Grab your phone and dial *#*#2846579#*#*, go to Background Settings -> USB Port Settings -> Manufacture Mode and press close.
Plug in your phone and let it install drivers.
Open up HCU client, select Unlock, and then Read Bootloader Code.
when you have the code, save it!
Turn off your phone
Hold volume down and power, now we are in fastboot mode.
Open CMD and write:
CD C:\platform-tools
fastboot oem unlock YOUR UNLOCK KEY HERE
Accept the stuff and unlock your bootloader, your phone will be factory reset, and all your data lost if you dont have a backup.
Turn the phone off and on again, set it up, and go to settings -> System -> System update, and update, mine was ANE-LX1 8.0.0.162(C432)
Now re-enable USB Debugging option in Developer Options.
install Magisk Manager (https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip)
Download patched_ramdisk.img (https://mega.nz/#!GWp1ia6R!xUcg_T_17v1ktlFQPq-Ujo4DRKfAg8E4-_k2J2zLO60)
and place it in the root of your phones internal storage
Open up Magisk Manager, press install -> install -> Patch Boot Image File -> find the patched_ramdisk.img and click OK.
Now open CMD and write:
CD C:\platform-tools>
adb pull /storage/emulated/0/download/patched_boot.img
Now you should have the patched_boot.img in your platform tools folder.
Turn off your phone, hold volume down and power to get to fastboot mode.
in CMD write:
CD C:\platform-tools>
fastboot flash ramdisk patched_boot.img
reboot your phone and check if magisk was installed correctly and check if you have root.
Hope this works for you!
Great guide. Just a tip instead of using cd C:\platform-tools you can shift+right click on the adb folder and click "open powershell here". Saves some time
Thank you for this, but I have a question about this part:
Then you need to downgrade your firmware to 146 using Dload method, as DCU Client can't read the bootloader unlock code on newer firmwares.
Click to expand...
Click to collapse
Mine is ANE-LX3, what would be the equivalent to 146 so that DC-unlocker can read it?
Yes, you just need to find a firmware for LX3, i dont think flashing a 64gb firmware on a 32gb device is smart.
dcduartee said:
Great guide. Just a tip instead of using cd C:\platform-tools you can shift+right click on the adb folder and click "open powershell here". Saves some time
Click to expand...
Click to collapse
I have tried that and PowerShell doesnt Work on my pc(i have replaced shift click shortcut so its CMD indtraf) and i wanted a noob proof way to make this work
And thanks.
Where could i find the correct firmware of ANE-LX1
Just use the address bar
brugernavn said:
I have tried that and PowerShell doesnt Work on my pc(i have replaced shift click shortcut so its CMD indtraf) and i wanted a noob proof way to make this work
And thanks.
Click to expand...
Click to collapse
Maybe you already know but I learned that you can just clic the address bar in a Windo(w)s system and write 'cmd' which is exactly the same as 'open a command prompt that starts in this very specific folder'.
E.g. in attachments.
Now I just want to know what firmware to downgrade to :/
LLoTE said:
Where could i find the correct firmware of ANE-LX1
Click to expand...
Click to collapse
Use the link in my guide.
lalovzg said:
Maybe you already know but I learned that you can just clic the address bar in a Windo(w)s system and write 'cmd' which is exactly the same as 'open a command prompt that starts in this very specific folder'.
E.g. in attachments.
Now I just want to know what firmware to downgrade to :/
Click to expand...
Click to collapse
Sweet thanks!.
Try and use this firmware:.
https://androidhost.ru/9V2
Using that as a reference I found one for my region I think (C69) that says:
Integrates Google security patches released in Apr 2018 for improved system security.
Click to expand...
Click to collapse
Is this April FullOTA a safe security patch to work with DC-u?
ANE-LX3C69CUSTC69
An another one big question: I am in the believe that my P20 lite is Single-SIM. Does it matter if that FullOTA (or any ROM/Update.app/etc) says DUAL-SIM? Should I look for the oldest Single-SIM??? or a Dual-SIM file would work just fine?
lalovzg said:
Using that as a reference I found one for my region I think (C69) that says:
Is this April FullOTA a safe security patch to work with DC-u?
ANE-LX3C69CUSTC69
An another one big question: I am in the believe that my P20 lite is Single-SIM. Does it matter if that FullOTA (or any ROM/Update.app/etc) says DUAL-SIM? Should I look for the oldest Single-SIM??? or a Dual-SIM file would work just fine?
Click to expand...
Click to collapse
If its single sim, you need a single sim firmware and just use a firmware under 150, you should be okay
Would someone like to pay for me cuz I don't got a way to pay i don't have any credit cards..i know this is stupid but im just a teenager and my parents wouldn't pay for it so here i am lol
@brugernavn
Bro your instructions are super perfect tuttorial very very BIG thankx
would know exactly the firmware that would go without a bootloader unlock hunger everywhere this Huawei P20 Lite firmware ANE-L21 Anne-L21 8.0.0.166 (C432)
The only thing is that which one is right where the to sdcard firmware into the dload folder and installs without problems
because of what I was looking for and so I made a mistake to link to the Huawei P20 Lite ANE-L21 Anne-L21 8.0.0.166 (C432) in format like This post forum
what i found for dual sim so all su with unlocked bootloader hurts me
PLEASE REPLY will be glad
HEKER510 said:
@brugernavn
Bro your instructions are super perfect tuttorial very very BIG thankx
would know exactly the firmware that would go without a bootloader unlock hunger everywhere this Huawei P20 Lite firmware ANE-L21 Anne-L21 8.0.0.166 (C432)
The only thing is that which one is right where the dam to sdcard firmware into the dload folder and installs without problems
because of what I was looking for and so I made a mistake to link to the Huawei P20 Lite ANE-L21 Anne-L21 8.0.0.166 (C432) in format like aky maš na forum
what i found for dual sim so all su with unlocked bootloader hurts me
PLEASE REPLY will be glad
Click to expand...
Click to collapse
Im sorry, i dont understand what you are writing
brugernavn said:
Im sorry, i dont understand what you are writing
Click to expand...
Click to collapse
i flashnig for sdcard firmware 146 for you link
i have must firmware 166 for sdcard
you helping my for firmware 166 for huawei p20 lite dual firmware 166(c432) flashing install sdcard for servis menu upgrade
identic 146 for 166 firmware
you understand my brother ?
HEKER510 said:
i flashnig for sdcard firmware 146 for you link
i have must firmware 166 for sdcard
you helping my for firmware 166 for huawei p20 lite dual firmware 166(c432) flashing install sdcard for servis menu upgrade
identic 146 for 166 firmware
you understand my brother ?
Click to expand...
Click to collapse
You first flash 146 firmware with Service menu.
Then unlock bootloader
Then update via the settings menu
brugernavn said:
You first flash 146 firmware with Service menu.
Then unlock bootloader
Then update via the settings menu
Click to expand...
Click to collapse
Bro 166 firmware for servis menu yes ? thankx you very much
thank you very much for your guide, brugernavn.:good:
I arrived without problems at the point: "Turn the phone off and on again, set it up, and go to settings -> System -> System update, and update, mine was ANE-LX1 8.0.0.162(C432)"
but the phone can not find updates ... (i before was in 150) but this isn't a problem.
My doubt is on how to install Magisk Manager (https://github.com/topjohnwu/Magisk/...gisk-v18.0.zip) .... with TWRP ?
Thank you again
Hey, to root my p20, flashing magisk via recovery, don't need ramimage, all works fine
how to do it
how to flashing magisk via recovery? (whit TWRP or not??) you can explain the passage?
cirovi said:
thank you very much for your guide, brugernavn.:good:
I arrived without problems at the point: "Turn the phone off and on again, set it up, and go to settings -> System -> System update, and update, mine was ANE-LX1 8.0.0.162(C432)"
but the phone can not find updates ... (i before was in 150) but this isn't a problem.
My doubt is on how to install Magisk Manager (https://github.com/topjohnwu/Magisk/...gisk-v18.0.zip) .... with TWRP ?
Thank you again
Click to expand...
Click to collapse
what software are you running now?
Related
Hi folks,
I got my RN5 AI Global a couple of days ago and I want to give Lineage OS a spin. Then I read about this dreaded feature of Google called "ARB" - a developer's nightmare!
My current version is 9.5.17 on my phone. When I change into settings I can see that 9.5.19 has been downloaded and is ready for installation, the only action I have to do is reboot. Since 9.5.19 carries ARB feature, I do not power down my phone in order not to install this fix.
So guys, here is my question: Is there any way I can prevent this update from installing on my phone?
Best wishes,
DFahren
Don't install it?
Just power down and go straight to fastboot (power+voldown) then use mi unlock to unlock then flash lineage after doing twrp.
Not that it would matter too much having 9.5.19 since you can bypass it blocking fastboot commands with the arbypass.img file
Nice idea. However my Mi account is not (yet) eligible for unlocking .... This will take 14 days, I suppose.
Delete the update from internal storage/downloaded_rom
And also turn off automatic updates so you don't get it again.
"If you are on MIUI 9, then:
- Go to Settings
- About Phone
- System Updates
- Click on 3 dots above right
- Turn Off both "Download Automatically" and "Download using Mobile Data"."
And you should be able to reboot your device.
Ok, what you are basically saying is: open a CMD on Windows, issue an "adb shell" and in this shell do a "cd xxx/storage/downloaded_rom; rm *", right?!
I have to do this because I do not see this folder downloaded_rom when using MIUI's filemanager. Correct?
Cheers, Dfahren
corkiejp said:
Delete the update from internal storage/downloaded_rom
And also turn off automatic updates so you don't get it again.
"If you are on MIUI 9, then:
- Go to Settings
- About Phone
- System Updates
- Click on 3 dots above right
- Turn Off both "Download Automatically" and "Download using Mobile Data"."
And you should be able to reboot your device.
Click to expand...
Click to collapse
@dfahren
Maybe try a different file manager than stock.
Someone else reported on another forum that they deleted the downloaded update.
Not sure how exactly, I will message them and find out how.
dfahren said:
Ok, what you are basically saying is: open a CMD on Windows, issue an "adb shell" and in this shell do a "cd xxx/storage/downloaded_rom; rm *", right?!
I have to do this because I do not see this folder downloaded_rom when using MIUI's filemanager. Correct?
Cheers, Dfahren
Click to expand...
Click to collapse
corkiejp said:
@dfahren
Maybe try a different file manager than stock.
Someone else reported on another forum that they deleted the downloaded update.
Not sure how exactly, I will message them and find out how.
Click to expand...
Click to collapse
I deleted the update zip file using solid explorer.
Sent from my Redmi Note 5 using Tapatalk
....deleted ....
gsmyth said:
I deleted the update zip file using solid explorer.
Click to expand...
Click to collapse
Yeah, that's also a good way to get rid of the update.
I used ADB with installed drivers. However path to the update was ..../sdcard/downloaded_rom , but that's a minor. Just wanted to let you guys know.
WARNING: You can't downgrade anymore once you flashed U4/S4 March update !
https://samfrew.com/model/SM-A805F/
SM-A8050
SM-A805F
SM-A805N you can't unlock bootloader on this variant! (R1Q_KOR_SINGLE.pit)
You will need:
-Odin v3.14.1
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
-Galaxy A80 Latest USB Driver
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
You want to download latest firmware directly from server? (fast download)
Samfirm 0.4.1 or Frija 1.4.2
https://samfirmtool.com/samfirm-v0-4-1
https://github.com/wssyncmldm/frija/releases
Frija not working ? install both vcredist_x00 for your device !
(Check your windows settings to know which version to install).
(Microsoft Visual C++ 2010 Redistributable Package) and (Microsoft Visual C++ 2008 Redistributable Package)
-https://www.microsoft.com/en-US/download/details.aspx?id=29 (x86) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=5555 (x86) 2010
-https://www.microsoft.com/en-US/download/details.aspx?id=15336 (64bit) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=14632 (64bit) 2010
-Open Frija and type in your model (mine is SM-A805F) and your CSC : (mine is LUX).
(All CSC's and models on Samfrew: https://samfrew.com/model/SM-A805F/).
-Download and extract SM-A805XX_1_00000000000000_xxxxxxxxxx_fac.zip
On your device:
If you want to unlock bootloader:
-Go to Settings then to About phone and find your build number.
-Tap on your build number 6 times until you see “You’re now a developer”.
-Go in Developer options > enable OEM unlocking.
-Connect the device to your PC.
-Power off your device with POWER and volume DOWN and directly hold volume UP and DOWN together!
-Device will boot in DOWNLOAD MODE.
-Long press volume UP to unlock the bootloader. This will wipe your data and automatically reboot your device!
If you dont want to unlock bootloader:.
-Download and extract Odin and open it as administrator.
Still in DOWNLOAD MODE:
-Click on BL and select BL_A805FXXXU4AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on AP and select AP_A805FXXXU4AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
-Click on CP and select CP_A805FXXXU4AXXX_CP14483800_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_OXM_A805FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_OXM_A805FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on START and wait for installation, when done you can unplug your device.
ROOTYour KNOX status will be tripped if you follow this tutorial...What's knox ? : https://www.google.com/search?q=samsung+knox+explained
-Download the latest stock firmware for your Samsung Galaxy A80 with Samfirm/Frija app (faster) or Samfrew/Sammobile website (way slower).
https://samfrew.com/model/SM-A805F/
-Extract the SM-A805XX_1_EXAMPLE_0000000000_fac.zip file with 7zip or any other unzipper.
-Copy the (AP_A805XXXXU1XXXX_CL00000000_QB00000000_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5) file and transfer it to your internal storage.
-Download and install Magisk Manager APK https://github.com/topjohnwu/Magisk/releases/download/manager-v7.5.1/MagiskManager-v7.5.1.apk
-Open Magisk Manager and go to Install > Install > Select and Patch a file.
-Navigate through the storage and select the extracted AP file.
The firmware will be patched and will be found in Internal Storage/Download/magisk_patched.tar.
-Transfer the patched file to your PC.
-Turn OFF your device and boot into DOWNLOAD MODE.
-In Odin, click on AP and select the patched tar file, Uncheck “Auto Reboot” and click on Install.
The tool will flash Magisk V20 on your Samsung Galaxy A80.
To boot in recovery or boot the system with Magisk installed:
1. Powering up normally → System without Magisk
2. Power + Volume Up → Bootloader warning → Release all buttons → System with Magisk
3. Power + Volume Up → Bootloader warning → Keep holding volume up → Actual recovery
My storage was reduced from 128gb to 32gb after doing this. Is there a fix?
any improvement..? could anyone confirm thats this way work corectly
edited: i hv tried still on unlock bootloader without root capability.. unfortunately there's not suitable magisk work on this device whatever try to patched method but still null
damn samsung device i hv ever owned
haanz85 said:
any improvement..? could anyone confirm thats this way work corectly
edited: i hv tried still on unlock bootloader without root capability.. unfortunately there's not suitable magisk work on this device whatever try to patched method but still null
damn samsung device i hv ever owned
Click to expand...
Click to collapse
Just fixed mine by doing the bootloader unlock and root steps above,
setup the phone without Google but with debug mode enabled,
flash twrp,
format data (the one that makes you type yes),
setup the phone with Google and debug mode, then
reflash the firmware with Odin (stock BL, magisk_patched AP, stock CP, and HOME_CSC).
Now I have 108gb storage with root! I just have to hold volume up+power button every time I boot, though.
Nazato said:
Just fixed mine by doing the bootloader unlock and root steps above,
setup the phone without Google but with debug mode enabled,
flash twrp,
format data (the one that makes you type yes),
setup the phone with Google and debug mode, then
reflash the firmware with Odin (stock BL, magisk_patched AP, stock CP, and HOME_CSC).
Now I have 108gb storage with root! I just have to hold volume up+power button every time I boot, though.
Click to expand...
Click to collapse
what version twrp u used? doesn't you have problems in reading internal storage or USB MTP/ connect pc? Does all run normally? please gv link the worked twrp if u have..
Could you please be more detailed in this steps?? I got this problems too. plz help.
hosheaxu said:
Could you please be more detailed in this steps?? I got this problems too. plz help.
Click to expand...
Click to collapse
read carefully every step bro. after flashing magisk patched then setup phone from beginning without setup google acount just skip, then check again by activating developer menu & usb debugging on. at the end reset from about menu..then phone's should reboot, after that install magisk manager then follow until finished process. & now after reboot u already got rooted beloved phone . congrats
haanz85 said:
what version twrp u used? doesn't you have problems in reading internal storage or USB MTP/ connect pc? Does all run normally? please gv link the worked twrp if u have..
Click to expand...
Click to collapse
Only the latest version from blackbuga, and yes, I can't access my internal storage through USB when in twrp. It doesn't bother me that much, because I only needed twrp to format the data so the storage goes back to 108gb from 32gb. Everything's been running fine so far.
Nazato said:
Only the latest version from blackbuga, and yes, I can't access my internal storage through USB when in twrp. It doesn't bother me that much, because I only needed twrp to format the data so the storage goes back to 108gb from 32gb. Everything's been running fine so far.
Click to expand...
Click to collapse
but why u need twrp just for get normal storage.. while my storage going fine without twrp & i just try reset in finalizing process then install magisk at the end & everything looks good.
right now I'm just curious why there's no more dev interest in working on custom recovery & roms which is in other hand there's plenty developer working on galaxy s series with snapdragon soc with great support for official/unofficial builds whether twrp or cust roms. so sad considering the device is quite a potential to be developed
haanz85 said:
but why u need twrp just for get normal storage.. while my storage going fine without twrp & i just try reset in finalizing process then install magisk at the end & everything looks good.
right now I'm just curious why there's no more dev interest in working on custom recovery & roms which is in other hand there's plenty developer working on galaxy s series with snapdragon soc with great support for official/unofficial builds whether twrp or cust roms. so sad considering the device is quite a potential to be developed
Click to expand...
Click to collapse
I just followed op's instructions in his A70 topic lol I get you. I came from iOS and I was really excited when I got the phone, but after seeing the development scene... I don't know, maybe it just has something to do with the phone's price being expensive and all that.
Nazato said:
I just followed op's instructions in his A70 topic lol I get you. I came from iOS and I was really excited when I got the phone, but after seeing the development scene... I don't know, maybe it just has something to do with the phone's price being expensive and all that.
Click to expand...
Click to collapse
yeah it's possible for sensitive pricing from first launching. in my country first launching price going around $705 then after few month until approaching new device release info to be released in February. on new years then the price going down until just left $549,50 then i decided to bought it :victory:
maybe many people's thinking like me, wait & see before grab this phone's :laugh:
Nazato said:
I don't know, maybe it just has something to do with the phone's price being expensive and all that.
Click to expand...
Click to collapse
.
Actually, the truth is something else and the price range is not relevant at all.
If you have A series, it is low price range of Sammy phones and if you owned previously Iphone, you jumped "from horse to donkey".
Here you can find android ultra expensive devices successfuly rooted and in everyday ongoing development.
As pricey device is, more support you have ( All S,S+ and Note series, for example).
I have very expensive Galaxy Fold device...successfully rooted with regulary ongoing development, therefore, price is not relevant at all.
There on IOS is missing crucial users inteligence, knowledge and developers on IOS users market.
Simply said...they don't have and don't need developer oriented users and no quality devices to be upgraded or "pushed" further more.
Also...IOS is CLOSED SOURCE system not opened for free development because Apple can't make profit of that.
tin2404 said:
.
Actually, the truth is something else and the price range is not relevant at all.
If you have A series, it is low price range of Sammy phones and if you owned previously Iphone, you jumped "from horse to donkey".
Here you can find android ultra expensive devices successfuly rooted and in everyday ongoing development.
As pricey device is, more support you have ( All S,S+ and Note series, for example).
I have very expensive Galaxy Fold device...successfully rooted with regulary ongoing development, therefore, price is not relevant at all.
There on IOS is missing crucial users inteligence, knowledge and developers on IOS users market.
Simply said...they don't have and don't need developer oriented users and no quality devices to be upgraded or "pushed" further more.
Also...IOS is CLOSED SOURCE system not opened for free development because Apple can't make profit of that.
Click to expand...
Click to collapse
but what about this device? are u still make exception from regular ongoing development.. until now there's no famous developer that saw it for builds known roms out there although this doll already succesfully rooted, but none of them build us twrp with fully support & maybe one or two working cust roms
Android 10 is released.
https://samfrew.com/model/SM-A805F/
A805FXXU4BTC3
BK said:
Android 10 is released.
https://samfrew.com/model/SM-A805F/
A805FXXU4BTC3
Click to expand...
Click to collapse
Is This only for france devices?
android 10
Thanks for your help..
i want ask we can do the root and TWRP recovery for android 10 i wanna update my phone but dont know if its ok or not i need the root and dont want lose it
can you help please if its ok or not ???
thanks
uae.coool said:
Thanks for your help..
i want ask we can do the root and TWRP recovery for android 10 i wanna update my phone but dont know if its ok or not i need the root and dont want lose it
can you help please if its ok or not ???
thanks
Click to expand...
Click to collapse
go right ahead I'm rooted on Android 10 right now just follow the instructions again
i rooted all went ok but when i transfer my all data i find out no root and i tried to install TWRP but i really cand do this and every time fall
please help
uae.coool said:
i rooted all went ok but when i transfer my all data i find out no root and i tried to install TWRP but i really cand do this and every time fall
please help
Click to expand...
Click to collapse
just flash everything again (magisk patched AP) with HOME_CSC. DON'T WIPE
Nazato said:
just flash everything again (magisk patched AP) with HOME_CSC. DON'T WIPE
Click to expand...
Click to collapse
ok thanks will try it now
other things is losing the memory showing 32gb after the root and when wipe no root ???
and one more things please how to install TWRP i tried many time but stack in the samaung logo ???
thanks again
Updated with more compatible adb link!
This is what I did to get the new beta. Feel free to tell me how dumb I am for allowing noobies to try the beta, but the more the merrier and they should know the risks....
RISKS: Phone may not be as stable as before and you will lose all your apps and data. Camera is bugged for me
1. BACK UP YOUR CURRENT BUILD USING SMART SWITCH. THIS WILL WIPE DALVIK/CACHE/DATA. Get SmartSwitch for PC HERE
2. Download Samsung Drivers for ADB/ODIN HERE
3. If you are on firmware ending in AUI5 for the CSC version XAA then skip to step #6 . If you are not, then download the respective firmware HERE
Also Download Patched ODIN (Patched version will be less scrutinous) HERE
4. Unzip the firmware you just downloaded as well as the Patched Odin. Run ODIN and add the BL, AP, CP, Home_CSC from the unzipped firmware to the corresponding locations in ODIN
5. Turn off phone and boot into "Download Mode" by first holding Volume +/- buttons and then hold the Power button. Now plug in your phone to your PC and you will see the first small grey square in the upper left side of ODIN turn light blue (if it does not, you have issues with either the cable or drivers).
Proceed in flashing the device by simply clicking the "Start" button.
Once it is done and your phone has rebooted... Make sure that you complete the setup process just in case of authentication issues if the phone isn't already set up
6. Download the OneUI 4 Beta HERE and then follow the guide to install adb https://www.xda-developers.com/install-adb-windows-macos-linux/
7. Follow the XDA adb install guide and make sure to allow adb systemwide when asked by the program.
8. Turn off phone. Boot into device by holding Volume Up and then holding Power. This will take you into recovery mode, where you will see the option to "update via ADB sideload".
Use the volume down key to navigate down to that option and press power to initiate the adb sideload function
9. Open command prompt by pressing the Windows key and typing "cmd" (no quotes) and press ENTER.
10. Type into the command prompt (of course remove the quotes) "adb sideload C:\path\to\your\oneui4\zip\file" . For example if I download that file into my Downloads folder, I would then type "adb sideload C:\Users\MyPC\Downloads\949981470b3948c3aa05a19e8a2edbd3.zip"
Bro I have SM-F926B, I downloaded the correct CSC but can't install the beta, I got a message on smd says can't read. Any help please?
shadi90 said:
Bro I have SM-F926B, I downloaded the correct CSC but can't install the beta, I got a message on smd says can't read. Any help please?
Click to expand...
Click to collapse
This is for US Fold 3 models f926U/1. Sorry brotha. Basically you need to change the beta file you downloaded to this http://fota-secure-dn.ospserver.net...48:16&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA== as well as flash AUJ7 firmware first. I hear UK with CSC BTE works fine. Get it at https://samfw.com/firmware/SM-F926B/BTE/F926BXXU1AUJ7 . After you replaced those files, just follow the instructions again
Thanks for this Guide. But i have issue with Adb sideload update.zip
I downgrade to AUI5 and been using XAA firmware since i bought T-mobile Zfold3.
And since beta was released, I'd been trying to register for OneUI4 in Samsung Memeber app but No Banner or under rBenefit tab.
So saw your guide here and tried to followed your direction but adb sideload fails i get CANNOT READ message.
when i typed adb Devices it shows my device so adb is working but cannot sideload.
when i downloaded the update it was .bin 949981470b3948c3aa05a19e8a2edbd3.bin so i renamed it to .zip, i got the CANNOT READ message then renamed it to update.zip still the same Cannot Read.
I am using windows 11.
Haven't logged in to XDA in years. Just wanted to say THANK YOU.
mha1021 said:
Thanks for this Guide. But i have issue with Adb sideload update.zip
I downgrade to AUI5 and been using XAA firmware since i bought T-mobile Zfold3.
And since beta was released, I'd been trying to register for OneUI4 in Samsung Memeber app but No Banner or under rBenefit tab.
So saw your guide here and tried to followed your direction but adb sideload fails i get CANNOT READ message.
when i typed adb Devices it shows my device so adb is working but cannot sideload.
when i downloaded the update it was .bin 949981470b3948c3aa05a19e8a2edbd3.bin so i renamed it to .zip, i got the CANNOT READ message then renamed it to update.zip still the same Cannot Read.
I am using windows 11.
Click to expand...
Click to collapse
Don't rename the file.
What I always do with adb related stuff is put it in the root of my C drive. So it would be
Code:
C:\adb\platform-tools\
Then put the .bin file in here as well.
After that open cmd and do
Code:
cd C:\adb\platform-tools\
and hit enter.
After that do adb sideload 94 and hit tab so it should autofill the name of the update file.
Let me know if you have any questions.
Thanks for the instructions as they worked for me. I did receive an error before it finished at "(~94%) adb: failed to read command: No error". Phone booted and the system is showing One UI version 4.0, Android Version 12.
QUESTION though. What is up with the difference in Baseband version? I am seeing the official release having the last 2 digits of "JF" but on the phone just flashed, it is showing "JH".
For reference, complete Baseband version: F929U1UEU1ZUJH after flashing. Might just be my ignorance but thought I would ask.
Thoughts? And thank you again!
AlexMartin00 said:
Thanks for the instructions as they worked for me. I did receive an error before it finished at "(~94%) adb: failed to read command: No error". Phone booted and the system is showing One UI version 4.0, Android Version 12.
QUESTION though. What is up with the difference in Baseband version? I am seeing the official release having the last 2 digits of "JF" but on the phone just flashed, it is showing "JH".
For reference, complete Baseband version: F929U1UEU1ZUJH after flashing. Might just be my ignorance but thought I would ask.
Thoughts? And thank you again!
Click to expand...
Click to collapse
The baseband is just something that gets updated, so ZUJH is the Android 12 beta firmware. Every time you update your firmware the baseband gets updated as well.
More technical: Baseband is firmware that controls all radio devices on the phone, including GPS, Wi-Fi, Bluetooth, NFC, cellular data, and more.
Will this work on att Galaxy fold 3 since I can't get update cause att blocks it.
Hero_is_Over said:
This is what I did to get the new beta. Feel free to tell me how dumb I am for allowing noobies to try the beta, but the more the merrier and they should know the risks....
RISKS: Phone may not be as stable as before and you will lose all your apps and data. Camera is bugged for me
1. BACK UP YOUR CURRENT BUILD USING SMART SWITCH. THIS WILL WIPE DALVIK/CACHE/DATA. Get SmartSwitch for PC HERE
2. Download Samsung Drivers for ADB/ODIN HERE
3. If you are on firmware ending in AUI5 for the CSC version XAA then skip to step #6 . If you are not, then download the respective firmware HERE
Also Download Patched ODIN (Patched version will be less scrutinous) HERE
4. Unzip the firmware you just downloaded as well as the Patched Odin. Run ODIN and add the BL, AP, CP, Home_CSC from the unzipped firmware to the corresponding locations in ODIN
5. Turn off phone and boot into "Download Mode" by first holding Volume +/- buttons and then hold the Power button. Now plug in your phone to your PC and you will see the first small grey square in the upper left side of ODIN turn light blue (if it does not, you have issues with either the cable or drivers).
Proceed in flashing the device by simply clicking the "Start" button.
Once it is done and your phone has rebooted... Make sure that you complete the setup process just in case of authentication issues if the phone isn't already set up
6. Download the OneUI 4 Beta HERE and then download the "15 Second ADB Installer" HERE
7. Install the 15 second adb installer and make sure to allow adb systemwide when asked by the program.
8. Turn off phone. Boot into device by holding Volume Up and then holding Power. This will take you into recovery mode, where you will see the option to "update via ADB sideload".
Use the volume down key to navigate down to that option and press power to initiate the adb sideload function
9. Open command prompt by pressing the Windows key and typing "cmd" (no quotes) and press ENTER.
10. Type into the command prompt (of course remove the quotes) "adb sideload C:\path\to\your\oneui4\zip\file" . For example if I download that file into my Downloads folder, I would then type "adb sideload C:\Users\MyPC\Downloads\949981470b3948c3aa05a19e8a2edbd3.zip"
Click to expand...
Click to collapse
hi I'm getting a status 1 error with my sideload
erneyone said:
hi I'm getting a status 1 error with my sideload
Click to expand...
Click to collapse
What does the error say?
I keep getting cannot read '949981470b3948c3aa05a19e8a2edbd3.bin and I do have the file on my ADB folder which is on the C drive i don't know if it matter but I'm using a windows 11 laptop
zimgir124 said:
What does the error say?
Click to expand...
Click to collapse
Status 1
Is there a mirror for the beta download anywhere? It looks like the link isn't working for me.
ElGuyarc said:
I keep getting cannot read '949981470b3948c3aa05a19e8a2edbd3.bin and I do have the file on my ADB folder which is on the C drive i don't know if it matter but I'm using a windows 11 laptop
Click to expand...
Click to collapse
was getting the cannot read error too.. the problem is the outdated adb version installed from the 15 second adb link in the op
download this:
How to install ADB on Windows, macOS, and Linux
A step-by-step guide to get you started with the Android Debug Bridge tool.
www.xda-developers.com
Dick_Stickitinski said:
was getting the cannot read error too.. the problem is the outdated adb version installed from the 15 second adb link in the op
download this:
How to install ADB on Windows, macOS, and Linux
A step-by-step guide to get you started with the Android Debug Bridge tool.
www.xda-developers.com
Click to expand...
Click to collapse
thank you so much...
I updated my SM-F926U1 with the Beta 4 its really buggy for me
Just want to get my facts straight. Can I just flash back to non-beta ?
What will happen to my Beta status will I still be able to OTA update when the next beta comes out ?
I have updated this with the newer adb binary install guide. I use the latest binaries from Android Studio and add them to path manually so I didnt know the 15 second installer was that outdated
Also yes you can downgrade by flashing the AUI5 that I posted in the guide
Hero_is_Over said:
I have updated this with the newer adb binary install guide. I use the latest binaries from Android Studio and add them to path manually so I didnt know the 15 second installer was that outdated
Also yes you can downgrade by flashing the AUI5 that I posted in the guide
Click to expand...
Click to collapse
Is it a good idea to wipe my data when doing an downgrade like this ?
Hero_is_Over said:
I have updated this with the newer adb binary install guide. I use the latest binaries from Android Studio and add them to path manually so I didnt know the 15 second installer was that outdated
Also yes you can downgrade by flashing the AUI5 that I posted in the guide
Click to expand...
Click to collapse
I thought you can't flash a previous version of Android once you're on the higher version?
DISCLAIMER* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.PRE REQUIREMENTS:- SDK Platform-tools (Get it here)
-boot.img from Stock Rom
-Patience
LET'S BEGIN!
Extract the SDK Platform tools folder to an easily accessible directory
UNLOCKING THE BOOTLOADERNOTE: THIS WILL ERASE ALL DATA FROM YOUR DEVICE SO MAKE SURE TO TAKE A BACKUP IF NECESSARY
-Extract the SDK Platform tools folder to an easily accessible directory
- Go to Settings > About Tablet > Tap build number 7 times. Go back to main page of Settings > System > Developer
options and enable OEM unlocking and USB Debugging
- Reboot the system to bootloader (Press Vol - and Power key or type "adb reboot bootloader" by opening a command prompt window in Platform tools directory)
- To unlock bootloader type the below code
fastboot flashing unlock
- The device will do a factory reset and restart itself
-After Setting up your device install the magisk app from here
ROOTING [MAGISK]METHOD-1 (FASTBOOT)- Transfer your boot.img to Internal Stroage
- After installing the magisk app Go to Install > Select and Patch a File
- Select the boot.img you transferred to Internal Storage. Magisk will patch your boot.img and display the output folder after the process.
- Transfer the Patched boot.img to SDK Platform tools folder and rename it to boot.img
- Reboot to Bootloader and type the below command:
fastboot flash boot boot.img
-Reboot the device by typing:
fastboot reboot
-Check Magisk manager and the device must be rooted now
METHOD-2 (TWRP)- Install TWRP by following this guide
- Download the magisk apk. Transfer it to SD-Card and flash it from twrp
- Reboot your device
CREDITS@topjohnwu Magisk
@adazem009 For TWRP recovery
Press Thanks button if this guide was useful to you!
@Johannj22
We would appreciate if you provide all help in the open on the thread itself. Please do not post Telegram links and request users to visit you there for help. TG links can only be posted by Devs on Development threads in the OP only. Please read THIS.
PATCHED BOOT IMAGE FROM YT-X705FThis is a magisk patched boot.img from the latest firmware for YT-X705F. Please don't use it for other models (YT-X705L, YT-X705X)
TNSMANI said:
@Johannj22
We would appreciate if you provide all help in the open on the thread itself. Please do not post Telegram links and request users to visit you there for help. TG links can only be posted by Devs on Development threads in the OP only. Please read THIS.
Click to expand...
Click to collapse
Noted sir. It won't happen again
what version of ROM you use .
the last one is not work with magisk
I use this version YT_X705F_S001135_210909_ROW
yes this one is the last one see date from post yet,
but magisk will not work with this version anymore.
i collect from earlier version this "boot.img" does it match with a android roms 10 from lenovo ?
Loserintheend said:
yes this one is the last one see date from post yet,
but magisk will not work with this version anymore.
i collect from earlier version this "boot.img" does it match with a android roms 10 from lenovo ?
Click to expand...
Click to collapse
You just have to make sure you use the boot.img from the exact firmware you are on now. Let me know if it worked.
Johannj22 said:
I use this version YT_X705F_S001135_210909_ROW
Click to expand...
Click to collapse
so S001135 was last Offizial ROM from Lenovo , just was waiting to install this one as root.
because every three month Lenovo release OTA-Update for some Update and get worse.
After rooting tablet and lenovo release update, " boot.img" must be change back to install OTA Update from lenovo .
Now it seams this OS will be stable on Lenovo YT_X705F SMART TAB.
But still probs on running differnt APPS on this doomed crap tablet, for this issue i'm looking on LineageOS
Loserintheend said:
so S001135 was last Offizial ROM from Lenovo , just was waiting to install this one as root.
because every three month Lenovo release Update for some Update and get worse.
After rooting tablet and lenovo release update, " boot.img" must be change back to install update from lenovo .
Now it seams this OS will be stable on Lenovo YT_X705F SMART TAB.
But still probs on running differnt APPS on this doomed crap tablet, for this issue i'm looking on LineageOS
Click to expand...
Click to collapse
If you are on the same firmware S001135 then just use the boot.img I posted above. It should work. Also It would be better to disable system updates. I am creating a seperate post for running GSI of LineageOS and other ROMS.
Johannj22 said:
If you are on the same firmware S001135 then just use the boot.img I posted above. It should work. Also It would be better to disable system updates. I am creating a seperate post for running GSI of LineageOS and other ROMS.
Click to expand...
Click to collapse
No way to disable updates , after every reboot this tablet ask you again. Only mark, i will update rom manuell.
BTW im also switch off all this spying GOOGLE Apps , and a lot of this junk apps from google .
Loserintheend said:
No way to disable updates , after every reboot this tablet ask you again. Only mark, i will update rom manuell.
BTW im also switch off all this spying GOOGLE Apps , and a lot of this junk apps from google .
Click to expand...
Click to collapse
SO you are not able to root the device?. I am on latest update and I rooted it. You can install the latest firmware from Rescue and Smart assistant. Just flash it onto your device. The downloaded ROM should be saved in C:\ProgramData\RSA\Rom files\YT-X705Fxxxx\.......There you should fine boot.img
Johannj22 said:
SO you are not able to root the device?. I am on latest update and I rooted it. You can install the latest firmware from Rescue and Smart assistant. Just flash it onto your device. The downloaded ROM should be saved in C:\ProgramData\RSA\Rom files\YT-X705Fxxxx\.......There you should fine boot.img
Click to expand...
Click to collapse
i told you i do it twice , but by the last ROM i was waiting .. read my issue #9
Loserintheend said:
i told you i do it twice , but by the last ROM i was waiting .. read my issue #9
Click to expand...
Click to collapse
Waiting?. I am sorry I think its the language barrier ..I don't understand certain things you say.
Any help provided for X705X tab,It got A10 update.How can I get stock rom and boot image for the latest update?
Finally I find out RSA mentioned in this threads and able to download stock firmware
vygavedha said:
Finally I find out RSA mentioned in this threads and able to download stock firmware
Click to expand...
Click to collapse
Yes use RSA and flash the stock firmware. This stock firmware you flashed should be saved in your system's C:\ProgramData\RSA\Rom Files folder. Just get the required image files from there/
I did not flashed. I just downloaded the firmware. But it seems it is downloaded with some extension(.bmp Or pac which I did not check well).
How can I extract boot img from this?
I renamed to zip and extracted. But could not find any image files.
Can you help how did you do the extraction?
vygavedha said:
I did not flashed. I just downloaded the firmware. But it seems it is downloaded with some extension(.bmp Or pac which I did not check well).
How can I extract boot img from this?
I renamed to zip and extracted. But could not find any image files.
Can you help how did you do the extraction?
Click to expand...
Click to collapse
Send me a screenshot
Johannj22 said:
Send me a screenshot
Click to expand...
Click to collapse
Sure. I have deleted the downloaded file. I will redownload the same and update the screen shot tomorrow
Everything you do, you do at your own risk. I'm not responsible for all damages, this can also lead to loss of warranty.
Hi,
Probably many of you know how to do a Magisk install without TWRP, but this guide is for people who don't know and don't want to mess things up.
I will try to show you step by step how to do it.
Many thanks to:
kdrag0n
topjohnwu
Leave them a nice feedback
!!! Before we start make sure your device is unlocked, if you don't know how to do it below is link to official Xiaomi guide !!!
https://c.mi.com/thread-2262302-1-0.html
Requirement
Xiaomi Mi Flash ver. =>3-14-0 - Needed to install all adb drivers Download
ADB & Fastboot tools - Could be the one built into Mi Flash tool I'll use this to make it simple
Magisk =>24.2 - This software is base of our rooting process Download
SafetyNet Fix => 2.2.1 (Zygisk) - Needed to backdoor SafetyNet fail check, at the moment it is only working method for Mi Pad 5 Download Make sure you download the Zygisk version!
Boot.img - You can download from official MIUI website full flashable rom and separate boot.img file from there, or use my if your Miui version is China 13.0.5, EEA 13.0.3, Global 13.0.1
China 13.0.5EEA 13.0.3Global 13.0.1Installation
To make it easier, Green color mean what you need to do on Tablet, Orange on PC
Unzip Mi Flash tool
Open folder and run XiaoMiFlash.exe, if window "Driver" won't pop-up click on the Driver tab and then "Install" button and close all windows.
Connect your tablet to computer, when your tablet ask how you want use USB, choose File Transfer/Android Auto
Copy to internal storage Magisk-v****.apk, safetynet-fix-v****.zip and boot.img
Open File Manager on your tablet find a folder where you copied all files, and install Magisk
Open Magisk app, and click on Install in section Magisk, then select "Select and Path a File", after that find your boot.img file and click on it
Click "LET'S GO" button on the right side and wait until process will be finished
On your computer in the tablet's storage window, go to the file specified in the application probably /Download/magisk_patched-*****
Copy this file to a subfolder of Mi Flash on your computer, exactly to MiFlash2020-3-14-0\Source\ThirdParty\Google\Android and change the name of this file to boot.img
Open PowerShell/Windows Terminal in this folder (Hold Shift + Right click -> Open PowerShell window here)
Make sure your tablet have enabled USB debugging in Developer options Setting -> Additional settings -> Developer options -> USB debugging
Turn off your tablet, then hold down Power and VOL- until the screen lights up, then release power button, if Fastboot appears, everything went fine
Go back to your Terminal window and type to check if your computer see your tablet
Code:
./fastboot.exe devices
If you see answer "******** fastboot" it mean there is communication between PC and Tablet
Next type this command to flash patched boot image
Code:
./fastboot.exe flash boot boot.img
Next type this command to reboot your device
Code:
./fastboot.exe reboot
Restart can take a longer time than normal
Open Magisk app and check status of Magisk, if you see for exaple "Installed 24.2 (24200)" everything went fine
Open Settings in right corner of app and in section App click on Hide the Magisk app then type name for hidden app, it will ask to install new app so do it
Open again Magisk app and open Settings in section Magisk enable Zygisk (Beta) and Enforce DenyList
Click on Configure DenyList than click on three dots in right corner and uncheck Show system apps
Search for all the apps in the list below and check them. It is important to click on their name to see all modules, once you have done this click on the box to activate all of them
Code:
Google
Google Assistant (I have two)
Google Pay
Google Play services
Google Play Store
After that reboot your tablet, and open again Magisk app
On the bottom click on Modules
Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
After that reboot your device one more time
After reboot open Android Settings go to Apps and Unhide system services than find and clear all data of Google Play services and Google Play Store
Reboot tablet last time
If you have reached this point it means that everything has gone correctly, probably for about 3 hours you will still not be able to install Netflix and some banking applications but after this time everything will be back to normal, this is because Google's servers have detected that Magisk has been installed but that the application has been changed and Zygisk has been enabled so at the next check it notices that everything is Ok and gives access back.
Quick explaination what happend here:
Magisk has been installed and device is Rooted
The application has been changed and hidden
Zygisk has been activated and hidden from Google services
SafetyNet-fix was installed, which restores the functionality of SafetyNet and Widevine L1, which is blocked after the installation of Magisk and unlocked Bootloader
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Nux01 said:
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Click to expand...
Click to collapse
Hi Nux01,
1. Unfortunately yes, TWRP isn't supported for Pad 5 yet.
2. It won't work, TWRP app is only making a request to TWRP custom recovery, until it doesn't exist you can't even install custom ROM
3. It is, but i didn't test it yet on Pad 5, and I don't know if it will work with new decides because last release is from 20.07.2020.
https://github.com/francescotescari/XiaoMiToolV2/releases
4. Yes, you need Xiaomi account, also your device has to be logged in, and registered to unlock, Xiaomi made complete guide how to do this, link is on the top of this post.
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Nux01 said:
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Click to expand...
Click to collapse
I mean it's quite old release so it may not work with current unlock bootloader process on new devices like a Xiaomi 12, Xiaomi Pad 5 etc. I can't promise it won't brick your device, only confirmed method is by official Xiaomi tool.
Thank you
I'll wait a little bit before rooting my tablet.
Have a nice day.
Followed the instruction, worked like a charm. Although I had unknown "chinese sings" errors with the driver install it worked. By the way there is a newer version of the flashing tool.
Thanks for the effort of writing this down!
Hello,
I just managed to unlock the bootloader of my tablet "Pad 5".
I tried under Mac and Linux with Xiaomitool V2 without success (error 20036 and 20045).
I also tried with VirtualBox who did not recognize the tablet.
I succeeded with VMware and Windows 7 by testing different drivers and it worked.
I just root the tablet with Magisk.
On the other hand, is there the equivalent of TWRP to make a complete system backup. Apart from Titanium and MyBackup.
Thanks for your help.
thanks dude.
didn't try this yet, just wondering.
can't i just flash recovery and then flash magisk.apk?
thanks
Can i update ota to 13.0.2 after rooted? Just update and root again?
Cpanel10x said:
Can i update ota to 13.0.2 after rooted? Just update and root again?
Click to expand...
Click to collapse
You can update, but after that you need root again but with boot.img from 13.0.2
How to get the boot.img 13.0.2? I checked the 3GB Firmware and only found vendor_boot.img. Is it the same thing?
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Thomas Brown 99 said:
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Click to expand...
Click to collapse
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Thanks for this awesome guide. Do you have some suggest about the magisk modules to install?
thanks, it just worked perfectly and your step by step guide is very handy and helpful. thanks so so much.
vjsaini00 said:
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Click to expand...
Click to collapse
Today evening, I'll add more boot.img
kisielec said:
Today evening, I'll add more boot.img
Click to expand...
Click to collapse
eagerly waiting, Thanks
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
24. Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
25. After that reboot your device one more time
Click to expand...
Click to collapse
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
cysmaster said:
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
Click to expand...
Click to collapse
I also have this module installed without problems, as there is no recovey for Pad5, it is a good idea to install in magisk the module Magisk Bootloop Protector, which serves exactly to prevent what you are afraid that happen with your tablet