Develop Bugs

Micromax A67 Stock rom flashing help needed

How to flash stock rom in Micromax A67, Which has disabled usb debugging and pattern locked. I have downloaded stock rom but don't know which tools to use for flashing.
Please Help me guys.

PurushothRokr said:
How to flash stock rom in Micromax A67, Which has disabled usb debugging and pattern locked. I have downloaded stock rom but don't know which tools to use for flashing.
Please Help me guys.
Click to expand...
Click to collapse
Download this tool!
www68.zippyshare.com/v/12752862/file.html
hit "Thanks button" if this helped you...

f_u_006 said:
Download this tool!
www68.zippyshare.com/v/12752862/file.html
hit "Thanks button" if this helped you...
Click to expand...
Click to collapse
Thanks,
Would you tell me that how to use the tool.
Where i can get the scatter file.
I am using windows 8 in my adb console list of attached device is not showing the serial number of my device(Micromax A67)
guide me please.

PurushothRokr said:
Thanks,
Would you tell me that how to use the tool.
Where i can get the scatter file.
I am using windows 8 in my adb console list of attached device is not showing the serial number of my device(Micromax A67)
guide me please.
Click to expand...
Click to collapse
read this ultimate guide which reflects any Micromax mobiles with flasher n' firmware.
forum.xda-developers.com/showthread.php?t=2520719
---------- Post added at 11:31 PM ---------- Previous post was at 11:30 PM ----------
By the way what is your stock firmware format? (ZIP, IMG, TAR.MD5....)

f_u_006 said:
read this ultimate guide which reflects any Micromax mobiles with flasher n' firmware.
forum.xda-developers.com/showthread.php?t=2520719
---------- Post added at 11:31 PM ---------- Previous post was at 11:30 PM ----------
By the way what is your stock firmware format? (ZIP, IMG, TAR.MD5....)
Click to expand...
Click to collapse
I have a zip file which contains some .nvm files , one .tar.gz.pac file and two .img files inside of Hw info folder.

PurushothRokr said:
I have a zip file which contains some .nvm files , one .tar.gz.pac file and two .img files inside of Hw info folder.
Click to expand...
Click to collapse
Don't extract the zip!
name the zip rom.zip and in fastboot type
fastboot devices
fastboot flash zip rom.zip (type this two times if first time failed)
fastboot reboot
WARNING: DO IT AT YOUR OWN RISK! NOTHING IS GUARANTEED AND I AM NOT RESPONSIBLE FOR ALIEN INVASION OR BRICKED DEVICE.
if you still have problems then quadcheck this:
htteforum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android

f_u_006 said:
Don't extract the zip!
name the zip rom.zip and in fastboot type
fastboot devices
fastboot flash zip rom.zip (type this two times if first time failed)
fastboot reboot
WARNING: DO IT AT YOUR OWN RISK! NOTHING IS GUARANTEED AND I AM NOT RESPONSIBLE FOR ALIEN INVASION OR BRICKED DEVICE.
if you still have problems then quadcheck this:
htteforum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
Click to expand...
Click to collapse
In fastboot mode my pc says "Usb not recognized" i have installed fastboot and adb drivers. "fastboot devices" not showing my device.

PurushothRokr said:
In fastboot mode my pc says "Usb not recognized" i have installed fastboot and adb drivers. "fastboot devices" not showing my device.
Click to expand...
Click to collapse
while in fastboot mode, you need to install the fastboot drivers, if your windows still saying USB not recognized then change the ports.

f_u_006 said:
while in fastboot mode, you need to install the fastboot drivers, if your windows still saying USB not recognized then change the ports.
Click to expand...
Click to collapse
Okay bro,Would you please link me to some tutorial to install fastboot drivers on windows(preferably win 7)

PurushothRokr said:
Okay bro,Would you please link me to some tutorial to install fastboot drivers on windows(preferably win 7)
Click to expand...
Click to collapse
www.androidheat.com/adb-fastboot-install-drivers-setup/
if this didn't worked then:
forum.xda-developers.com/showthread.php?t=2588979
If it still didn't worked then ask me anytime!
I am here in service dear brother.

f_u_006 said:
www.androidheat.com/adb-fastboot-install-drivers-setup/
if this didn't worked then:
forum.xda-developers.com/showthread.php?t=2588979
If it still didn't worked then ask me anytime!
I am here in service dear brother.
Click to expand...
Click to collapse
Thanks bro ,
I have tried both methods. When i tried to list device("adb devices") it not showing my mobile. It guess the problem with USB debug is OFF.
Connecting mobile in fastboot mode gives the following notification on my pc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But, my mobile is recognized only in Android Multi Tools Application, where it list my device. Unfortunately it also fails to show the mobile on fastboot mode.

LMAO!! enabling USB debugging is the most important part.
As i said, there is a problem with your USB port or mobile data cable.

Buddy...get ready... there will be a seperate for our device very soon. I am requesting mod. N he has approved my request
Sent from my Micromax A67 using Tapatalk 4

using fast boot mode does not flash imei
f_u_006 said:
Don't extract the zip!
name the zip rom.zip and in fastboot type
fastboot devices
fastboot flash zip rom.zip (type this two times if first time failed)
fastboot reboot
WARNING: DO IT AT YOUR OWN RISK! NOTHING IS GUARANTEED AND I AM NOT RESPONSIBLE FOR ALIEN INVASION OR BRICKED DEVICE.
if you still have problems then quadcheck this:
htteforum.xda-developers
i
its safe mean imei is flash or not using fastboot mode recovery?
Click to expand...
Click to collapse

error
PurushothRokr said:
In fastboot mode my pc says "Usb not recognized" i have installed fastboot and adb drivers. "fastboot devices" not showing my device.
Click to expand...
Click to collapse
i have done all process but in cmd its show can't load rom file...

kindle not booting

So i installed Twrp on my Kindle fire and then wiped and tried to install custom rom, the rom failed and rebooted to nothing, is therer any way to fix this every time i use the boot menu to go to recovery it reboots to the blue boot logo and then boots back to the regular and just stays at the grey and orange boot logo,the kfu doesn't detect my kindle any thin i can do?
thanks

bennyboy2120 said:
So i installed Twrp on my Kindle fire and then wiped and tried to install custom rom, the rom failed and rebooted to nothing, is therer any way to fix this every time i use the boot menu to go to recovery it reboots to the blue boot logo and then boots back to the regular and just stays at the grey and orange boot logo,the kfu doesn't detect my kindle any thin i can do?
thanks
Click to expand...
Click to collapse
reflash TWRP following
make sure drivers are installed, device manager should see it as a android phone>adb interface
If your PC is running Windows 8.1
Drivers may not install correctly
Watch How to disable driver signature enforcement - Windows 8.1 & 8
and use drivers from Kindle Fire Utility
Download ADB/Fastboot.exe Files from
Kindle.Fire.fastboot.Files.zip md5:5D68723E59AD5C1EFCCD3481C6D8E63B
Verify md5 checksums for files https://sites.google.com/site/sdshadowscollection/home/hash-checksums
Create a folder in c drive named adb,
unzip/extract files,
copy AdbWinUsbApi.dll, AdbWinApi.dll, adb.exe, fastboot.exe, fbmode, fff-u-boot_v1.5.bin, and openrecovery-twrp-2.2.2.1-blaze.img to adb folder.
Open a Command Prompt (start>all programs>accessories>Command prompt)
change directory to adb with
Code:
cd\adb
Code:
fastboot devices
should see something like 123456789 bootloader
if not drivers may need to be fixed
if you get a good response
Code:
fastboot flash recovery openrecovery-twrp-2.2.2.1-blaze.img
fastboot reboot
retry boot recovery option
if still doesn't work
try
Code:
fastboot flash bootloader fff-u-boot_v1.5.bin

stuck at waiting for device
bennyboy2120 said:
So i installed Twrp on my Kindle fire and then wiped and tried to install custom rom, the rom failed and rebooted to nothing, is therer any way to fix this every time i use the boot menu to go to recovery it reboots to the blue boot logo and then boots back to the regular and just stays at the grey and orange boot logo,the kfu doesn't detect my kindle any thin i can do?
thanks
Click to expand...
Click to collapse
sd_shadow said:
reflash TWRP following
make sure drivers are installed, device manager should see it as a android phone>adb interface
If your PC is running Windows 8.1
Drivers may not install correctly
Watch How to disable driver signature enforcement - Windows 8.1 & 8
and use drivers from Kindle Fire Utility
Download ADB/Fastboot.exe Files from
Kindle.Fire.fastboot.Files.zip md5:5D68723E59AD5C1EFCCD3481C6D8E63B
Verify md5 checksums for files https://sites.google.com/site/sdshadowscollection/home/hash-checksums
Create a folder in c drive named adb,
unzip/extract files,
copy AdbWinUsbApi.dll, AdbWinApi.dll, adb.exe, fastboot.exe, fbmode, fff-u-boot_v1.5.bin, and openrecovery-twrp-2.2.2.1-blaze.img to adb folder.
Open a Command Prompt (start>all programs>accessories>Command prompt)
change directory to adb with
Code:
cd\adb
Code:
fastboot devices
should see something like 123456789 bootloader
if not drivers may need to be fixed
if you get a good response
Code:
fastboot flash recovery openrecovery-twrp-2.2.2.1-blaze.img
fastboot reboot
retry boot recovery option
if still doesn't work
try
Code:
fastboot flash bootloader fff-u-boot_v1.5.bin
Click to expand...
Click to collapse
it doesnt get passed the waiting for device when i put in fastboot device

bennyboy2120 said:
it doesnt get passed the waiting for device when i put in fastboot device
Click to expand...
Click to collapse
Drivers are not correct
Sent from my XT862 using Tapatalk

is there a specific driver i need to install ive tried several ones

Use install drivers.bat in kindle fire utility
Sent from my XT862 using Tapatalk

i tried to use kfu to boot into fastboot and everytime it says ok but fff seems to be cutting the boot off if i am right because the kindle will go to the menu then blink then say booting then boot up normally

bennyboy2120 said:
i tried to use kfu to boot into fastboot and everytime it says ok but fff seems to be cutting the boot off if i am right because the kindle will go to the menu then blink then say booting then boot up normally
Click to expand...
Click to collapse
That is fastboot
---------- Post added at 09:27 PM ---------- Previous post was at 09:22 PM ----------
Every time you see press power for boot menu it is in fastboot mode

sd_shadow said:
That is fastboot
---------- Post added at 09:27 PM ---------- Previous post was at 09:22 PM ----------
Every time you see press power for boot menu it is in fastboot mode
Click to expand...
Click to collapse
but the kfu has been sayin waiting for device for a long time

bennyboy2120 said:
but the kfu has been sayin waiting for device for a long time
Click to expand...
Click to collapse
I said use KFU to install drivers, it doesn't work well, to install TWRP, once you have FFF.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
Did you use the install_drivers.bat?

well if it is then why is it still say waiting for device, im so confused. this is what it says
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Drivers are not correct

bennyboy2120 said:
well if it is then why is it still say waiting for device, im so confused. this is what it says
Click to expand...
Click to collapse
sorry if i am being quick and anoyying i just need to fix it as soon as i can haha

and i don't like repeating my self
Did you run the install_drivers.bat?

i did use the bat file from the kfu 0.9.9 and it said drivers are installed

bennyboy2120 said:
i did use the bat file from the kfu 0.9.9 and it said drivers are installed
Click to expand...
Click to collapse
the driver in device manager says android adb interface, i have no idea what i am doing wrong tough.

bennyboy2120 said:
the driver in device manager says android adb interface, i have no idea what i am doing wrong tough.
Click to expand...
Click to collapse
try rebooting pc
---------- Post added at 11:11 PM ---------- Previous post was at 10:48 PM ----------
If still haven't got it, maybe time for SoupKit
Sent from my XT862 using Tapatalk
---------- Post added at 11:13 PM ---------- Previous post was at 11:11 PM ----------
Or a different PC
Sent from my XT862 using Tapatalk

might have to go to soupkit haha

bennyboy2120 said:
might have to go to soupkit haha
Click to expand...
Click to collapse
Be careful with soupkit, its not a toy...

Help me, nokia n1 error bootloader

Hi
My n1 can not boot up, besides not being a way to recovery . Now it's just getting fastboot , not receiving ADB ( device not found) . I can not use " ADB sideload ... " I want you to help me out of this situation . Thank you very much.

winterday said:
Hi
My n1 can not boot up, besides not being a way to recovery . Now it's just getting fastboot , not receiving ADB ( device not found) . I can not use " ADB sideload ... " I want you to help me out of this situation . Thank you very much.
Click to expand...
Click to collapse
Go to the nokia n1 general forum and click the link "Nokia n1 Rooted with Google Play" and install adb systemwide according to step 1, then download and unpack the file from step 2 and follow step 4 till 6 until you get in to clockwork recovery from there go to advanced storage and do data wipe/factory reset (this will clean the bootloop you may be experiencing and brings back the nokia n1 to its first boot) hope this helps, if not please say so and i try to help you out.

defendos said:
Go to the nokia n1 general forum and click the link "Nokia n1 Rooted with Google Play" and install adb systemwide according to step 1, then download and unpack the file from step 2 and follow step 4 till 6 until you get in to clockwork recovery from there go to advanced storage and do data wipe/factory reset (this will clean the bootloop you may be experiencing and brings back the nokia n1 to its first boot) hope this helps, if not please say so and i try to help you out.
Click to expand...
Click to collapse
Thank Defendos
I have followed your instructions, but it does not receive ADB (I type the command: adb devices), and fastboot devices are ok. Sorry for my english.

winterday said:
Thank Defendos
I have followed your instructions, but it does not receive ADB (I type the command: adb devices), and fastboot devices are ok. Sorry for my english.
Click to expand...
Click to collapse
I discovered the device can not connect "MTP usb device" ( error code 10 ) .. you can help me

winterday said:
Thank Defendos
I have followed your instructions, but it does not receive ADB (I type the command: adb devices), and fastboot devices are ok. Sorry for my english.
Click to expand...
Click to collapse
The (root) program in the guide have an automated adb (the t4 command) as the adb does not work yet with nokia n1.
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
winterday said:
I discovered the device can not connect "MTP usb device" ( error code 10 ) .. you can help me
Click to expand...
Click to collapse
Are you in the bootloader, recovery or just normaly booted? as the device name will change according to where it is booted in i have noticed.

defendos said:
The (root) program in the guide have an automated adb (the t4 command) as the adb does not work yet with nokia n1.
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
Are you in the bootloader, recovery or just normaly booted? as the device name will change according to where it is booted in i have noticed.
Click to expand...
Click to collapse
Dear
image of status the divice, i can't working ADB , thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
[/URL][/IMG]
[URL=http://up.ssc.vn/view.php?filename=21420160326_111403.jpg][img]
[URL=http://up.ssc.vn/view.php?filename=12720160326_112009.jpg][img]http://up.ssc.vn/images/12720160326_112009.jpg[/URL][/IMG][/IMG]
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]

any progress on this? I seem to have the exact same problem..

I'm in the same situation, please anybody have idea how get back the system works?
My my pc doesn't see my N1 now as mtp and camera connection has been deactivated

winterday said:
Hi
My n1 can not boot up, besides not being a way to recovery . Now it's just getting fastboot , not receiving ADB ( device not found) . I can not use " ADB sideload ... " I want you to help me out of this situation . Thank you very much.
Click to expand...
Click to collapse
I have same trouble ((

If you're in fatsboot mode adb commands are useless. You have to flash a different recovery and afterwards a different rom. I ported my N1 from A5CNB19 to A5FMB19 (taiwan version with google services) in the same way. First find out a recovery so:
fastboot flash boot recovery.img
Then
fastboot flash system system.img
And your N1 will be back with play services
You need the minimal adb and fastboot drivers installed on your pc

Hi all, I found the entrance for the brick write Whats App +79621045474

Root your L1 with Magisk

Update: I used Linux machine instead of Windows and the latest kernel works now.
Kernel modifications:
default.prop modified
ro.secure=0
ro.debuggable=1
Requirement:
1. Your L1
2. Installed drivers (Sony so0112 for both ADB and fastboot)
3. Your phone has to be bootloader unlocked
Warning: your phone will be wiped including DRM and there's no backup solution for Android 7
4. Magisk downloaded and installed
https://forum.xda-developers.com/apps/magisk
5. This modified kernel (sorry, I don't know how to make TWRP so no recovery at this time)
https://androidfilehost.com/?fid=673791459329056251 (patched with Magisk)
https://androidfilehost.com/?fid=889964283620760970 (modified but not patched with Magisk)
Kernel is for G3313, but it should work with other variations.
6. Working ADB
Instructions:
1. enable your phone debug options. Go to About Devices >>> Build Number and hit 7 times until you see Developers Options. Go there to enable USB Debugging and Allow OEM Unlock.
2. plug in your phone and make sure ADB is working
Code:
adb devices
If you don't see it, go to Device Manager and see whether Sony so0112 ADB driver installed. If it's working, go to 3
3. copy the modified kernel to your phone (make sure your phone USB is in file transfer mode) internal memory Downloads folder
4. install and open Magisk and install and patch boot file and locate the downloaded file.
5. locate patched kernel from internal memory /Magiskmanager/ and copy patched_boot.img and copy to your host computer.
6. go to command prompt and copy your ADB folder address and open your file explorer and copy the patched kernel there (e.g. Downloads)
7. use this command to go to fastboot mode
Code:
adb reboot fastboot
If you never unlock the bootloader, you have to write down your phone IMEI and go to https://developer.sonymobile.com/unlockbootloader/ and follow the instruction.
8. if your bootloader unlocked, enter the following command
Code:
fastboot flash boot
and drag the patched kernel and press enter.
9. enter
Code:
fastboot reboot
10. once you're back to the system, enter Magisk Manager again to check boot status. You may be prompted to install a module for Safety Net.
11. your phone is rooted. Done
Credits:
@osm0sis for Android Image Kitchen
@topjohnwu for Magisk
@rrvuhpg, @bigrammy, and @janjan gave me inspiration. It cannot be done without them

Bro i g3311 single sim do a funcionality this tutorial?
Recovery twrp is no
Boot.img is yes
Bro good hardwork
so root is using magisk?
---------- Post added at 07:05 PM ---------- Previous post was at 06:57 PM ----------
Magisk is a zip how install anyidea?

You have to run Magisk Manager to patch the modified kernel, and flash the patched kernel using fasrboot command

I cant signal gsm for g3311
No signal mobile
This boot is bad for my g3311 ???

I will make three different variations for 3311 and 3312 and try again.
No reception at all?

HELPPPPPPPPPPPP
I do not understand the patch for magisk
i am install magsik in 5.0.4
i dont instaled magisk v. 14
please help me how to all install install Thank you

HEKER510 said:
HELPPPPPPPPPPPP
I do not understand the patch for magisk
i am install magsik in 5.0.4
i dont instaled magisk v. 14
please help me how to all install install Thank you
Click to expand...
Click to collapse
It's pretty straightforward.
After the installation, copy the downloaded boot image to your phone and let Magisk get the zip and patch your image file.
Once the image patched, copy the patched image back to host computer and flash in fastboot.

mingkee said:
It's pretty straightforward.
After the installation, copy the downloaded boot image to your phone and let Magisk get the zip and patch your image file.
Once the image patched, copy the patched image back to host computer and flash in fastboot.
Click to expand...
Click to collapse
I am Flash uk verzion
Flashing img for magisk
Flash img for fastboot
My phone no signal gsm
Who IS problem bro
Recovery twrp IS no? Bro
Thankx you reply
---------- Post added at 03:58 PM ---------- Previous post was at 03:20 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

HEKER510 said:
I am Flash uk verzion
Flashing img for magisk
Flash img for fastboot
My phone no signal gsm
Who IS problem bro
Recovery twrp IS no? Bro
Thankx you reply
Click to expand...
Click to collapse
I have checked and I found it cannot read SIM.
You can flash back to 100% stock using flashtool. There's a problem with kernel and probably something is missing.

mingkee said:
I have checked and I found it cannot read SIM.
You can flash back to 100% stock using flashtool. There's a problem with kernel and probably something is missing.
Click to expand...
Click to collapse
ok bro i flashing back for origo fw 79 uk yes ?
i waiting for your new boot.img bro
i am a read this this is so found problem are problem is solved clik this tutorial and read this
Is tutorial for xa xa ultra root no problem please read brother
https://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3638727
read
6. Power off the phone and flash ONLY "BOOT_DELIVERY" from a Marshmallow firmware with Flashtool ( exclude all other patitions), you must only see
"boot_delivery.xml" in the "Content" column.
AND
18. Power off the phone again and repeat step 6 with your actual Nougat firmware or the phone will not detect Sim Card(s)

HEKER510 said:
ok bro i flashing back for origo fw 79 uk yes ?
i waiting for your new boot.img bro
i am a read this this is so found problem are problem is solved clik this tutorial and read this
Is tutorial for xa xa ultra root no problem please read brother
https://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3638727
read
6. Power off the phone and flash ONLY "BOOT_DELIVERY" from a Marshmallow firmware with Flashtool ( exclude all other patitions), you must only see
"boot_delivery.xml" in the "Content" column.
AND
18. Power off the phone again and repeat step 6 with your actual Nougat firmware or the phone will not detect Sim Card(s)
Click to expand...
Click to collapse
I will upload new boot image. This time I did it in Linux (Ubuntu) platform instead of Windows. It tested on mine and SIM is working now.
Try this one https://androidfilehost.com/?fid=673791459329056251
It's already patched with Magisk, but you may need to install the zip anyway

mingkee said:
I will upload new boot image. This time I did it in Linux (Ubuntu) platform instead of Windows. It tested on mine and SIM is working now.
Try this one https://androidfilehost.com/?fid=673791459329056251
It's already patched with Magisk, but you may need to install the zip anyway
Click to expand...
Click to collapse
Ok bro very thankx i is download and flash thanx
i come back
---------- Post added at 07:37 AM ---------- Previous post was at 07:01 AM ----------
@mingkee
Bro very very thankx its all ok root magisk and signal gsm its ok brother very very thankx for you hardwork
as a thanks you
I sent the theme for L1 with the navbar logo
very very thankx )))))))))))))))))))))))))))))))
Theme Xperia™L1 Black
Download: https://mega.nz/#!bkgy0STK!6a3n9tfWxF1N4kJi1E-_Wx9fhY32svFKs5gAH2eqRqo

Don't try with G3311!!
I tried this with my G3311 and it put it into a boot loop (couldn't even turn device off or enter flash/fastboot mode) I had to take out the battery and replug it just to get into flash mode so I could restore to official Software
This will most likely work for everyone else that had a bootloop after trying this :good:

MasterMasher said:
I tried this with my G3311 and it put it into a boot loop (couldn't even turn device off or enter flash/fastboot mode) I had to take out the battery and replug it just to get into flash mode so I could restore to official Software
This will most likely work for everyone else that had a bootloop after trying this :good:
Click to expand...
Click to collapse
Which kernel did you use?
You should try with the one before patched with Magisk, and let Magisk patch it for you, and flash that one patched by yours.
There may be something going wrong during the process while I read he has no problem (with reception) and you got bootloop.

mingkee said:
Which kernel did you use?
You should try with the one before patched with Magisk, and let Magisk patch it for you, and flash that one patched by yours.
There may be something going wrong during the process while I read he has no problem (with reception) and you got bootloop.
Click to expand...
Click to collapse
I realised where I went wrong it's was all my mistake so my last post was incorrect I used Sony Mobile Flasher to unlock bootloader instead of enabling it in developer settings and then flashed my device with your latest update you commented earlier and it's finally worked :victory:

Great work on the boot.img trying to get it working on my L1 now. I'm missing something tho.
Unlocked bootloader
ADB
Fastboot
Downloaded files
I have to hold volume up while inserting USB to enter fastboot (confirmed by Blue led)
When I executed fastboot code and drag images file over I get an error about unknown directory or it'll just rerun the fastboot help screen
---------- Post added at 11:32 PM ---------- Previous post was at 11:09 PM ----------
.... Wait for it..... Yeah I see I screwed up. Give it another go later after work

flyyyguy said:
Great work on the boot.img trying to get it working on my L1 now. I'm missing something tho.
Unlocked bootloader
ADB
Fastboot
Downloaded files
I have to hold volume up while inserting USB to enter fastboot (confirmed by Blue led)
When I executed fastboot code and drag images file over I get an error about unknown directory or it'll just rerun the fastboot help screen
---------- Post added at 11:32 PM ---------- Previous post was at 11:09 PM ----------
.... Wait for it..... Yeah I see I screwed up. Give it another go later after work
Click to expand...
Click to collapse
Try what I did and download Sony Mobile Flasher and press the 'BLU' (Bootloader unlock) button just to make sure your boot loader really is unlocked or maybe you just enabled OEM unlock in Dev settings but didn't use the tool mentioned above to correctly unlock the bootloader. If that's not the case then did you flash the latest boot image that has been posted in the comments by OP

I did bootloader unlock using fastboot method
It isn't just "fastboot oem unlock". Instead, you have to enter fastboot command as directed with given unlocked code.

flyyyguy said:
Great work on the boot.img trying to get it working on my L1 now. I'm missing something tho.
Unlocked bootloader
ADB
Fastboot
Downloaded files
I have to hold volume up while inserting USB to enter fastboot (confirmed by Blue led)
When I executed fastboot code and drag images file over I get an error about unknown directory or it'll just rerun the fastboot help screen
---------- Post added at 11:32 PM ---------- Previous post was at 11:09 PM ----------
.... Wait for it..... Yeah I see I screwed up. Give it another go later after work
Click to expand...
Click to collapse
mingkee said:
I did bootloader unlock using fastboot method
It isn't just "fastboot oem unlock". Instead, you have to enter fastboot command as directed with given unlocked code.
Click to expand...
Click to collapse
Mingkee is right but I just used Sony Mobile Flasher to unlock bootloader instead works just as well with the click of a button

Actually, I won't end from here.
Since I have set up a dedicated Linux machine, I will try to go further to make recovery.

I REALLY NEED YOUR HELP for QFIL ROM for lenovo p2 :( :'(

Hi, friends..
until now I'm still looking for QFIL ROM / Qfil File for Flashing My Hard bricked device.
is there anyone who owns the file? or just know where I can download it? I really need that.
just information, my device is not able to boot, can not enter fastboot, can not enter recovery mode, Just red led blinking, and on PC detected as 9008.
I've tried the method using adb / cmd, but unfortunately my device is not detected on adb / cmd. very ironic, whereas in device manager detected as 9008.
I am very grateful if there is a member here who can provide solutions to my problems.
the only thing that makes me feel that my device can still be used is because it still detected as 9008. da the only last hope is only QFIL method.
regards

https://forum.xda-developers.com/lenovo-p2/how-to/how-to-restore-lenovo-p2-hard-brick-t3652900
Check this
Sent from my Lenovo P2a42 using Tapatalk

salmanvts said:
https://forum.xda-developers.com/lenovo-p2/how-to/how-to-restore-lenovo-p2-hard-brick-t3652900
Check this
Sent from my Lenovo P2a42 using Tapatalk
Click to expand...
Click to collapse
thank you my bro.. but unfortunately cara ini tidak berhasil. mungkin kamu punya sarcara ini tidak berhasil. mungkin kamu punya any other suggestions?

salmanvts said:
https://forum.xda-developers.com/lenovo-p2/how-to/how-to-restore-lenovo-p2-hard-brick-t3652900
Check this
Sent from my Lenovo P2a42 using Tapatalk
Click to expand...
Click to collapse
thanks my bro .. but unfortunately this does not work. my device is not detected on ADB / Cmd . is it possible you have another suggestion?

There is no need adb in this methode
You told that your device is detected in device manager then this methode work for you

before all started, first recharge your p2 for 1/2 an hour to make sure enough battery more than 20%,
install lenovo p2 usb driver: https://mega.nz/#!rQgjACaJ!-ZV...VEe7yGZ-jr4ijarO704T7x2IQdVjeU,
install qualcomm usb driver:
https://mega.nz/#!GNRWiQrJ!ASp...4EUiK_ba5YtlZUTQHP_r_P4Dd7hSZg
reboot your pc,
connect your p2 to pc,
go to pc device manager, you will see in pc device manager like in screenshot, if you didn't see like that press vol +and- togather with power button, hold all of them till appear like screenshoot
now download zip file blankflash tool https://mega.nz/#!PIZ0GChJ!3Rh...YQT_5ppZGxcconOntG1-d75vNK1Vg8, extract it, and place it in c folder your pc,
open folder and run blank-flash.bat,
automaticly your p2 will start reboot to fastboot,
or if your rom still intack p2 will reboot to system os,
Or if no os, now you can flash rom from fastboot
congratulation now your p2 back to live.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Lenovo P2a42 using Tapatalk

salmanvts said:
There is no need adb in this methode
You told that your device is detected in device manager then this methode work for you
Click to expand...
Click to collapse
yeah i know.. I mean ADB here is blankflash. because when we run blankflash, it looks the same as CMD / DOS, when I click blankflash he continue to identify the device and in the end he say "error".
I'll try to send you my progress log.
before thank you very much already want to try to help my bro.

adzerrians said:
yeah i know.. I mean ADB here is blankflash. because when we run blankflash, it looks the same as CMD / DOS, when I click blankflash he continue to identify the device and in the end he say "error".
I'll try to send you my progress log.
before thank you very much already want to try to help my bro.
Click to expand...
Click to collapse
I cant help you in any more, pls quote your problem in that thread,
Sent from my Lenovo P2a42 using Tapatalk
---------- Post added at 03:26 PM ---------- Previous post was at 03:19 PM ----------
Did your device detected in device manger, pls share the screen shot, and did you installed the lenovo driver and the qualcomm driver
Sent from my Lenovo P2a42 using Tapatalk

salmanvts said:
I cant help you in any more, pls quote your problem in that thread,
Sent from my Lenovo P2a42 using Tapatalk
---------- Post added at 03:26 PM ---------- Previous post was at 03:19 PM ----------
Did your device detected in device manger, pls share the screen shot, and did you installed the lenovo driver and the qualcomm driver
Sent from my Lenovo P2a42 using Tapatalk
Click to expand...
Click to collapse
Yes my bro.. my device detected in device manager as 9008 and I've installed lenovo usb & qualcom.

Then definitely you will get a solution, pls go to this thread and share your problem
https://forum.xda-developers.com/showthread.php?t=3652900
Sent from my Lenovo P2a42 using Tapatalk

adzerrians said:
Hi, friends..
until now I'm still looking for QFIL ROM / Qfil File for Flashing My Hard bricked device.
is there anyone who owns the file? or just know where I can download it? I really need that.
just information, my device is not able to boot, can not enter fastboot, can not enter recovery mode, Just red led blinking, and on PC detected as 9008.
I've tried the method using adb / cmd, but unfortunately my device is not detected on adb / cmd. very ironic, whereas in device manager detected as 9008.
I am very grateful if there is a member here who can provide solutions to my problems.
the only thing that makes me feel that my device can still be used is because it still detected as 9008. da the only last hope is only QFIL method.
regards
Click to expand...
Click to collapse
Bro just go to YouTube and search how to unbrick Lenovo p2a42
---------- Post added at 08:43 PM ---------- Previous post was at 08:40 PM ----------
adzerrians said:
Hi, friends..
until now I'm still looking for QFIL ROM / Qfil File for Flashing My Hard bricked device.
is there anyone who owns the file? or just know where I can download it? I really need that.
just information, my device is not able to boot, can not enter fastboot, can not enter recovery mode, Just red led blinking, and on PC detected as 9008.
I've tried the method using adb / cmd, but unfortunately my device is not detected on adb / cmd. very ironic, whereas in device manager detected as 9008.
I am very grateful if there is a member here who can provide solutions to my problems.
the only thing that makes me feel that my device can still be used is because it still detected as 9008. da the only last hope is only QFIL method.
regards
Click to expand...
Click to collapse
You still a chance see the video and if any error just open blank flash when you see the detecting device just press v- and power key released when show waiting for firehorse

even i had same issue. did u sort any solution for the problem?

just uncompress blankflash.zip which can be found in "mbm-ci" folder and run blank-flash.bat, it'll get you in bootloader from there you can flash the normal fastboot ROM ?

supersayan1000 said:
just uncompress blankflash.zip which can be found in "mbm-ci" folder and run blank-flash.bat, it'll get you in bootloader from there you can flash the normal fastboot ROM ?
Click to expand...
Click to collapse
Did this but no use my bootloader is corrupted as well

supersayan1000 said:
just uncompress blankflash.zip which can be found in "mbm-ci" folder and run blank-flash.bat, it'll get you in bootloader from there you can flash the normal fastboot ROM
Click to expand...
Click to collapse
I have bricked huwei gr5 2016 with no fastboot no dload ; can this method work on it? Thanks

hsheemi said:
I have bricked huwei gr5 2016 with no fastboot no dload ; can this method work on it? Thanks
Click to expand...
Click to collapse
Does your stock ROM have something like blankflash??

hsheemi said:
I have bricked huwei gr5 2016 with no fastboot no dload ; can this method work on it? Thanks
Click to expand...
Click to collapse
No sir
---------- Post added at 05:39 PM ---------- Previous post was at 05:38 PM ----------
supersayan1000 said:
Does your stock ROM have something like blankflash??
Click to expand...
Click to collapse
No sir its all IMG files

if my pc does not detect my lenovo p2 in device manager i cant recover to stock rom? i cant go to OS or to recovery because i have twrp and it is bootlooping. and when i go to fastboot mode and connect to pc, windows 10 shows error saying your USB device not recognized.