Stock rom for Hungarian variant? - LG G7 ThinQ Questions & Answers

Hello,
So i wanna go back from 8.1 aosp to stock rom, but i saw these different firmware versions people are talking about on this site like v10f,k,h or something and i don't get what they mean. If i install the firmware from here: https://forum.xda-developers.com/lg-g7-thinq/how-to/guide-how-to-flash-stock-firmware-lock-t3820888 , will it work? And is it the proper one? I had it installed once but only to get back from a bootloop, so I didn't really use it. Also, I checked on this website: https://www.mylgphones.com/lg-phones-software-update-hungary-download-lg-stock-kdz-firmware , i found the exact variant using my imei but there is no download link.

Clickau said:
Hello,
So i wanna go back from 8.1 aosp to stock rom, but i saw these different firmware versions people are talking about on this site like v10f,k,h or something and i don't get what they mean. If i install the firmware from here: https://forum.xda-developers.com/lg-g7-thinq/how-to/guide-how-to-flash-stock-firmware-lock-t3820888 , will it work? And is it the proper one? I had it installed once but only to get back from a bootloop, so I didn't really use it. Also, I checked on this website: https://www.mylgphones.com/lg-phones-software-update-hungary-download-lg-stock-kdz-firmware , i found the exact variant using my imei but there is no download link.
Click to expand...
Click to collapse
Hmmm...i would say don't rush unless you are sure.Maybe someone can help you.But in the past when i had sony (all sony categorie ) device u can flash any customized firmware version of countries of stock firmware as long you have UNLOCKED device.Not sure for lg.Please wait until someone guide you.Also please check link in this thread maybe it has what you need.(under kdz folder).

V10 b,f,k etc are system versions. Like program versions 1.2, 1.3, etc. There are 2 ways of going back to stock. You can use LG bridge to reinstall stock. Just reboot to download mode (reboot, USB , vol+). LG bridge should automatically detect the phone and allow you to update/go back to stock

LameMonster82 said:
V10 b,f,k etc are system versions. Like program versions 1.2, 1.3, etc. There are 2 ways of going back to stock. You can use LG bridge to reinstall stock. Just reboot to download mode (reboot, USB , vol+). LG bridge should automatically detect the phone and allow you to update/go back to stock
Click to expand...
Click to collapse
dev neo said:
Hmmm...i would say don't rush unless you are sure.Maybe someone can help you.But in the past when i had sony (all sony categorie ) device u can flash any customized firmware version of countries of stock firmware as long you have UNLOCKED device.Not sure for lg.Please wait until someone guide you.Also please check link in this thread maybe it has what you need.(under kdz folder).
Click to expand...
Click to collapse
Ok thank you, but i would like to make a full rom backup of the aosp i currently have installed. I don't think i can use twrp cause last time i flashed it, it bootlooped (even with the persistent version) and i had to reflash the boot img etc. I read about making a nandroid backup ( https://forum.xda-developers.com/showthread.php?t=1818321 ) with adb and dd but i would have to backup the entire memory and restore it and i would like not to mess with protected bootloader partitions for example. And i don't know exactly which partitions i want to backup with the method described above bcs there are partitions like recovery-persist and recovery-refresh and i don't know which are the right ones. Is there a way to do it?

Clickau said:
Hello,
So i wanna go back from 8.1 aosp to stock rom, but i saw these different firmware versions people are talking about on this site like v10f,k,h or something and i don't get what they mean. If i install the firmware from here: https://forum.xda-developers.com/lg-g7-thinq/how-to/guide-how-to-flash-stock-firmware-lock-t3820888 , will it work? And is it the proper one? I had it installed once but only to get back from a bootloop, so I didn't really use it. Also, I checked on this website: https://www.mylgphones.com/lg-phones-software-update-hungary-download-lg-stock-kdz-firmware , i found the exact variant using my imei but there is no download link.
Click to expand...
Click to collapse
use https://lg-firmware-rom.com/ to download the latest firmware for your phone with IMEI
---------- Post added at 01:39 AM ---------- Previous post was at 01:30 AM ----------

Related

HELP: I think i bricked my phone, won't boot.

Guys,
I used to be very good at rooting by in my HTC days (3 yrs ago). Not so much now a days :crying: I need some help.
I have the ATT LG G3 D850 (i believe) (16gb)
I rooted my phone a few months back. It was an app that did it quite easily for me. I downloaded and used root only apps like titanium back up with no problems.
I didn't download TWRP because at the time i don't believe it was available.
Anyways fast forward a few months and with lollipop out i thought i'd try to install TWRP and a rom that had android 5.0
I downloaded the TWRP app and then installed TWRP recovery through the app. (i listed my phone as D851 because i couldn't find D850 on the list)
Everything seemed to run fine and got a notification that the install was done successfully.
I tried to boot into recovery through the TWRP app and my phone did not boot! I get a message at the upper left corner of my phone that says:
: Boot Certification Verify
______________________________
Secure booting Error!
Cause : Boot Certification Verify
______________________________
and then my phone turns off.
What the hell did i do to my beautiful LG G3? Can someone help me fix this?
I greatly appreciate the help! This forum has always been so awesome!
You will probably have to reflash the KDZ - never choose a phone model unless its your actual device
Vivasanti said:
You will probably have to reflash the KDZ - never choose a phone model unless its your actual device
Click to expand...
Click to collapse
Can you help Explain how I do this? What is KDZ?
You must check what exactly model you have. Then download a firmware in KDZ format and flash it through LG Flash Tool. Can't give you more details, because I never used that way of flashing new firmware
You flashed TWRP for the T-Mobile variant that ships with an unlocked bootloader, however your variant has a locked boot loader hence the boot Sig error. You need to flash back to stock with kdz and then flash bumped TWRP which works around the locked bootloader and allows you to flash Roms and kernals. You can download "bumped" TWRP here: http://downloads.codefi.re/thecubed/lg_g3/bump/, and here is the thread: http://forum.xda-developers.com/lg-g3/orig-development/bump-unlock-lg-g3-twrp-d852-d852g-f400-t2900614
---------- Post added at 02:12 PM ---------- Previous post was at 02:02 PM ----------
This page is always helpful for finding packages, they would have the kdz I would think http://forum.xda-developers.com/showthread.php?t=2772658
melbing said:
You flashed TWRP for the T-Mobile variant that ships with an unlocked bootloader, however your variant has a locked boot loader hence the boot Sig error. You need to flash back to stock with kdz and then flash bumped TWRP which works around the locked bootloader and allows you to flash Roms and kernals. You can download "bumped" TWRP here: http://downloads.codefi.re/thecubed/lg_g3/bump/, and here is the thread: http://forum.xda-developers.com/lg-...mp-unlock-lg-g3-twrp-d852-d852g-f400-t2900614
---------- Post added at 02:12 PM ---------- Previous post was at 02:02 PM ----------
This page is always helpful for finding packages, they would have the kdz I would think http://forum.xda-developers.com/showthread.php?t=2772658
Click to expand...
Click to collapse
If i flash back to stock, will my phone be functional again? Or do i need to flash "bumped TWRP"
what is "bumped TWRP" ?
Your phone will be functional again if you flash back to stock afterward if you want to flash roms you need to then install bumped TWRP. Bumped TWRP is a special version of TWRP that has been patched to make it possible to use on variants of the g3 with locked bootloaders like yours, by tricking the phone into thinking it is booting stock recovery. This will allow you to flash Roms and kernals that have been "bumped" and apply mods like you would normally be able to with TWRP. Bump is basically a bootloader unlock for your phone that let's you flash roms, kernals, and Recovery's.
---------- Post added at 12:52 PM ---------- Previous post was at 12:16 PM ----------
You do not need to bumped TWRP unless you want to, you need to use the LG flash tool to reset your phone here's the link: http://forum.xda-developers.com/showthread.php?t=2797190 and check the index linked above to find the .kdz for the tool
melbing said:
Your phone will be functional again if you flash back to stock afterward if you want to flash roms you need to then install bumped TWRP. Bumped TWRP is a special version of TWRP that has been patched to make it possible to use on variants of the g3 with locked bootloaders like yours, by tricking the phone into thinking it is booting stock recovery. This will allow you to flash Roms and kernals that have been "bumped" and apply mods like you would normally be able to with TWRP. Bump is basically a bootloader unlock for your phone that let's you flash roms, kernals, and Recovery's.
---------- Post added at 12:52 PM ---------- Previous post was at 12:16 PM ----------
You do not need to bumped TWRP unless you want to, you need to use the LG flash tool to reset your phone here's the link: http://forum.xda-developers.com/showthread.php?t=2797190 and check the index linked above to find the .kdz for the tool
Click to expand...
Click to collapse
Thank you for your help. I travel a lot so i have not been able to sit down and try to fix this. I've been operating on my work phone all week. I hope to give this a shot sometime tomorrow.
Thanks again! Really appreciate the help.
melbing said:
Your phone will be functional again if you flash back to stock afterward if you want to flash roms you need to then install bumped TWRP. Bumped TWRP is a special version of TWRP that has been patched to make it possible to use on variants of the g3 with locked bootloaders like yours, by tricking the phone into thinking it is booting stock recovery. This will allow you to flash Roms and kernals that have been "bumped" and apply mods like you would normally be able to with TWRP. Bump is basically a bootloader unlock for your phone that let's you flash roms, kernals, and Recovery's.
---------- Post added at 12:52 PM ---------- Previous post was at 12:16 PM ----------
You do not need to bumped TWRP unless you want to, you need to use the LG flash tool to reset your phone here's the link: http://forum.xda-developers.com/showthread.php?t=2797190 and check the index linked above to find the .kdz for the tool
Click to expand...
Click to collapse
gosh it's going on 3-weeks without my phone. I've read through this thread http://forum.xda-developers.com/showthread.php?t=2797190
but i'm still lost. It's been so long since i rooted a phone i'm so out of touch with the jargon of today, makes me a little sad actually lol
so if i read this correctly i need to download the LG Flash Tool 2014 (can this be done on MAC?) I don't get what you mean with "and check the index linked above to find the .kdz for the tool"
i clicked on the link to the index, but what exactly am i looking for?
cyaiphone said:
gosh it's going on 3-weeks without my phone. I've read through this thread http://forum.xda-developers.com/showthread.php?t=2797190
but i'm still lost. It's been so long since i rooted a phone i'm so out of touch with the jargon of today, makes me a little sad actually lol
so if i read this correctly i need to download the LG Flash Tool 2014 (can this be done on MAC?) I don't get what you mean with "and check the index linked above to find the .kdz for the tool"
i clicked on the link to the index, but what exactly am i looking for?
Click to expand...
Click to collapse
You need to download the correct .kdz file for your variant. The .kdz is the complete stock firmware from LG. Also, if you really have an AT&T LG G3 (D850) it is a 32gb not 16gb version. If your phone only has 16gb of storage then you do not have a D850 and you need to go to your software information in the phone to verify what model you have. Do not flash anything for another variant as you see where that leads. Check back and let me know when you find out for sure which variant you have and I will point you to a specific thread for your device with step by step instructions on how to use the .kdz method to return to stock, then flash a Bump'd TWRP recovery so you can make a nandroid backup and save yourself from this mess again. I am also unsure if the .kdz restore method can be done on Mac, but I'm pretty sure it cannot be done considering the program provided is a Windows executable. Best of luck.
acparker18 said:
You need to download the correct .kdz file for your variant. The .kdz is the complete stock firmware from LG. Also, if you really have an AT&T LG G3 (D850) it is a 32gb not 16gb version. If your phone only has 16gb of storage then you do not have a D850 and you need to go to your software information in the phone to verify what model you have. Do not flash anything for another variant as you see where that leads. Check back and let me know when you find out for sure which variant you have and I will point you to a specific thread for your device with step by step instructions on how to use the .kdz method to return to stock, then flash a Bump'd TWRP recovery so you can make a nandroid backup and save yourself from this mess again. I am also unsure if the .kdz restore method can be done on Mac, but I'm pretty sure it cannot be done considering the program provided is a Windows executable. Best of luck.
Click to expand...
Click to collapse
I'm unable to get into my phone so I can't see what variant i have, but i do know that i have a 16gb on ATT.
I do have a windows laptop so i will attempt this on my laptop. Thank you so much for your help. I'll await your response.
All US Carriers for the LG G3 are 32gb models.
cyaiphone said:
I'm unable to get into my phone so I can't see what variant i have, but i do know that i have a 16gb on ATT.
I do have a windows laptop so i will attempt this on my laptop. Thank you so much for your help. I'll await your response.
Click to expand...
Click to collapse
I cannot point you in the right direction without having an exact model variant number. You obviously don't have a D850, but there are a few 16gb variants out there. I would hate to be the cause of you further bricking your phone. If you can dig through your information from the retailer you bought the phone from and give me an exact model, then I can help you without worrying about screwing you worse than you're already screwed.
---------- Post added at 11:01 AM ---------- Previous post was at 10:48 AM ----------
cyaiphone said:
I'm unable to get into my phone so I can't see what variant i have, but i do know that i have a 16gb on ATT.
I do have a windows laptop so i will attempt this on my laptop. Thank you so much for your help. I'll await your response.
Click to expand...
Click to collapse
The model number is listed on the IMEI sticker that's underneath the battery. My model says VS-985W since I have a white Verizon G3. Yours should say some model that starts with a D. This same number should also be plastered in multiple locations along the inside edge of the phone once the battery cover is removed.
acparker18 said:
I cannot point you in the right direction without having an exact model variant number. You obviously don't have a D850, but there are a few 16gb variants out there. I would hate to be the cause of you further bricking your phone. If you can dig through your information from the retailer you bought the phone from and give me an exact model, then I can help you without worrying about screwing you worse than you're already screwed.
---------- Post added at 11:01 AM ---------- Previous post was at 10:48 AM ----------
The model number is listed on the IMEI sticker that's underneath the battery. My model says VS-985W since I have a white Verizon G3. Yours should say some model that starts with a D. This same number should also be plastered in multiple locations along the inside edge of the phone once the battery cover is removed.
Click to expand...
Click to collapse
Ok, so the white sticker underneath my battery says LG-D850. There's also some D850 small white markings on the body of the phone.
The sticker on the box that my phone came in says "SW Ver D85010d"
cyaiphone said:
Ok, so the white sticker underneath my battery says LG-D850. There's also some D850 small white markings on the body of the phone.
The sticker on the box that my phone came in says "SW Ver D85010d"
Click to expand...
Click to collapse
Can you post a screenshot or two of your Storage page? The D850 is the AT&T model but they only come in a 32gb ROM / 3gb Ram storage option. All U.S. variants are of this variety and you should have access to 32gb of internal storage.
acparker18 said:
Can you post a screenshot or two of your Storage page? The D850 is the AT&T model but they only come in a 32gb ROM / 3gb Ram storage option. All U.S. variants are of this variety and you should have access to 32gb of internal storage.
Click to expand...
Click to collapse
My phone doesn't booT so I'm not sure I can get you a screen shot. Maybe I do have the 32 gb and me stating 16 gb was a mistake on my part.
cyaiphone said:
My phone doesn't booT so I'm not sure I can get you a screen shot. Maybe I do have the 32 gb and me stating 16 gb was a mistake on my part.
Click to expand...
Click to collapse
Sorry about repeatedly asking you to get information from your phone, too many different posts to keep up with!
http://forum.xda-developers.com/showthread.php?t=2785089
That link has everything you need to restore any variant back to stock. From there, you can root and Bump it if you want. Just download the KDZ from the link given in the OP of that thread. Make sure it says its for the D850 and try to find the earliest version possible if there are multiple options (eg. 10b instead of 10d if possible).
cyaiphone said:
My phone doesn't booT so I'm not sure I can get you a screen shot. Maybe I do have the 32 gb and me stating 16 gb was a mistake on my part.
Click to expand...
Click to collapse
Phone have got dowwnloadmod
If have downloadmod
Use lgflashtool flash file d850 tot 16gb
If cross [d851]to[d850]
use hex change tot
i can help you .
acparker18 said:
Sorry about repeatedly asking you to get information from your phone, too many different posts to keep up with!
http://forum.xda-developers.com/showthread.php?t=2785089
That link has everything you need to restore any variant back to stock. From there, you can root and Bump it if you want. Just download the KDZ from the link given in the OP of that thread. Make sure it says its for the D850 and try to find the earliest version possible if there are multiple options (eg. 10b instead of 10d if possible).
Click to expand...
Click to collapse
ok, here i go! I will attempt this now. It may be a looong night for me as i really don't know what i'm doing, but here it goes.
acparker18 said:
Sorry about repeatedly asking you to get information from your phone, too many different posts to keep up with!
http://forum.xda-developers.com/showthread.php?t=2785089
That link has everything you need to restore any variant back to stock. From there, you can root and Bump it if you want. Just download the KDZ from the link given in the OP of that thread. Make sure it says its for the D850 and try to find the earliest version possible if there are multiple options (eg. 10b instead of 10d if possible).
Click to expand...
Click to collapse
Ok so I clicked on the Firmware files link http://storagecow.eu/index.php?dir=X...+G3/Stock/ in the OP.
I then clicked on the very top folder which is ATT D850 folder. In that file, there's 3 different files. Do i need to download all these files?

Need stock ROM for Moto G5 XT1676 (3/16) DualSIM

Hello,
can somebody upload exactly this FW for this phone?
For 2 SIM cards? Yes
Software channel: reteu
Baseband version: M8937_11.16.02.51R CEDRIC_EMEADSDS_CUST
Kernel: original (stock): 3.18.31....
Android security level: 1 August 2017
Android version: 7.0
Build number: NPPS25.137-72-4
I can't find this ROM anywhere, but reallly need it. Thx in advance.
Mcandrew2809 said:
Hello,
can somebody upload exactly this FW for this phone?
For 2 SIM cards? Yes
Software channel: reteu
Baseband version: M8937_11.16.02.51R CEDRIC_EMEADSDS_CUST
Kernel: original (stock): 3.18.31....
Android security level: 1 August 2017
Android version: 7.0
Build number: NPPS25.137-72-4
I can't find this ROM anywhere, but reallly need it. Thx in advance.
Click to expand...
Click to collapse
I managed to break my XT1676 also, couldn't find the NPPS25.137-15-11 image either.
I ended up flashing NPP25.137-33 using RSDLite but modifying the flashing script to not flash the partition layout or the bootloader as they are older versions and got it back up and running. If you had that image on the phone previously and you have an unlocked bootloader you can do the same.
Let me know if you need more instructions.
Cheers.
Thank you for replying, raiamino.
I'd like to ask if is there any other option especially for phones with locked bootloader? I'd like to reflash my phone because it became unbelievably slow and laggy after some time. Factory reset didn't help much.
I flashed a lot of phones in the past (for example Sony Ericsson Xperia X8, Lenovo S60...) but this phone really surprises me about flashing. I found a lot of custom ROMs here on xda and I was thinking about flashing some also, but I'm a little bit scared of it - I don't know, which one is compatible and which isn't (nowhere is written if is custom ROM built for 2/16, 3/16, SingleSIM, DualSIM... variant). I need Moto Gestures feature (really useful thing for me) also, but don't know, if any custom ROM supports it. Do you know about any which will not cause brick (or hard brick) if I will flash it? Thx in advance.
Btw, sorry for bad English, but it's not my native language. Greetings from little big country - Slovakia.
Mcandrew2809 said:
Thank you for replying, raiamino.
I'd like to ask if is there any other option especially for phones with locked bootloader? I'd like to reflash my phone because it became unbelievably slow and laggy after some time. Factory reset didn't help much.
I flashed a lot of phones in the past (for example Sony Ericsson Xperia X8, Lenovo S60...) but this phone really surprises me about flashing. I found a lot of custom ROMs here on xda and I was thinking about flashing some also, but I'm a little bit scared of it - I don't know, which one is compatible and which isn't (nowhere is written if is custom ROM built for 2/16, 3/16, SingleSIM, DualSIM... variant). I need Moto Gestures feature (really useful thing for me) also, but don't know, if any custom ROM supports it. Do you know about any which will not cause brick (or hard brick) if I will flash it? Thx in advance.
Btw, sorry for bad English, but it's not my native language. Greetings from little big country - Slovakia.
Click to expand...
Click to collapse
you can do the following - warning it will erase everything on internal storage including photos music downloads documents etc - backup to sd card or laptop first if you want to keep these things
put phone into fastboot mode and connect to laptop
In a terminal/command prompt window assuming you have fastboot installed type the following
Code:
fastboot erase userdata
When you restart your phone it will be like the first time you switched it on (albeit with upgraded firmware version)
LineageOS supports moto gestures - For me they all work except shake to open camera app but you can set it to open with a double press of the power button
Flashing a custom rom designed for your phone will not hard brick it as it will never touch the bootloader so you will always be able to enter fastboot mode
Of course you can soft brick which means it either bootloops or you cant access recovery if you don't follow the correct process but you can solve that just by repeating the process correctly
All right, I will give it a try at evening (not enough time right now). So If I will do the fastboot command...
Code:
fastboot erase userdata
...what will happen? Is it the same procedure as factory reset + wipe cache?
Mcandrew2809 said:
All right, I will give it a try at evening (not enough time right now). So If I will do the fastboot command...
Code:
fastboot erase userdata
...what will happen? Is it the same procedure as factory reset + wipe cache?
Click to expand...
Click to collapse
yes but it also wipes everything on internal storage data partition
A reset + wipe cache will format data but not user data (things that are stored on internal storage such as pictures music documents downloads)
It does not format system or anything else
Thank you, it helped a lot! :highfive:
EDIT: what's difference between erase and format in fastboot? Would something bad happen if i do format command instead of erase?
Mcandrew2809 said:
Thank you, it helped a lot! :highfive:
EDIT: what's difference between erase and format in fastboot? Would something bad happen if i do format command instead of erase?
Click to expand...
Click to collapse
Iv no idea - it will either give an error unknown command or do something
erase userdata is the correct use
Hello,
I have the same phone and like to download the stock rom first before flashing a custom one (RR e.g.). I can't find anywhere a download for this version's custom rom yet. Is there any way to save the stock rom out of the still unmodified phone?
Thanks for your help!
Bro.. check this.. npps is for xt 1676 ( Europe, Turkey ) and npp is for xt 1677 ( India) . Both are dual sim 3gb version phones.. just may be customization difference. Hopefully all modem bands may work.
Npps or xt 1676 unfortunately dont have version above 25.137-15 ( which is an older firmware from what u have ) , so never flash it.
But npp have higher version 72/76/82.
Just in case u are not confident enough avoid gpt, and bootloader flashing.
Btw.. if you have messed up ur bootloader ( cant boot into fastboot) .. i think give these files a try.. btw.. you have nothing to loose since u have messed up pretty bad with bootloader.
This is the only last try till Oreo upadate ( if moto ever release it for g5)
Btw.. if u get successful.. please share.
https://www.clangsm.com/forum/index.php?showtopic=482933
---------- Post added at 02:34 PM ---------- Previous post was at 02:16 PM ----------
And if u are worried about modem ( which may cause wifi /signal issue) avoid flashing modem or try flashing old modem from npps25.137-15 ( the file is available in same directory) you can use the modem file only for flashing )
I mean.. first flash the complete npp25.137-76 ( i choose that file because its non branded ) .. after successful boot, check wifi and sim.
If everything is ok.. use the same..
If you have problems with wifi or sim..
Use modem file from npps 25.137-15 and flash modem partion only.
Or completely avoid all trial and error methods. And just flash npp25-137-76 with out flashing modem , bootloader, gpt, - its just like flashing a new kernel and system.. everything except system and kernel will remanin the same.
The method works only if u have a working bootloader. If its not there.. there is no way to trial and error things.. till u courageously flash the bootloader and gpt from npp version..
Hope you will get something.
---------- Post added at 02:51 PM ---------- Previous post was at 02:34 PM ----------
Currently.. my xt1676 is working with August security update ( npps - 25.137-72-4 ) rooted, unlocked.. i am trying hard to mess it up.. unfortunately twrp backup helps me to unbrick few times!! But soon or later i will manage to mess it up!!!???
Only then i will give these files a try... ( Or atlest till pixel 2 comes to retailer near by) . For now this is my backup phone after selling s7 edge.
This is just 2 weeks old.. and i manage to mess its os 5-6 times till now.. so i think i will be joining your club soon
Just the same phone as yours..2 weeks old.. but its alive till now.
showlyshah said:
Just the same phone as yours..2 weeks old.. but its alive till now.
Click to expand...
Click to collapse
Hi. Sorry for bumping an old thread but I thought it was better then to make a new one.
I bought this phone a few days ago and it had NPPS25.137-72-4 when delivered. Been trying to read up a bit on this device but since I'm used to samsung, it all takes a while to figure things out
Got it unlocked/rooted fine, but I want to make sure I have something to fall back on in case of trouble.
I've been searching for this fw without any luck. Any chance some one got it and can share it?
NPPS25.137-72-4
Or if anyone can suggest a different one that could work. ( I don't really understand the fw names yet)
Thanks in advance.
tys0n said:
Hi. Sorry for bumping an old thread but I thought it was better then to make a new one.
I bought this phone a few days ago and it had NPPS25.137-72-4 when delivered. Been trying to read up a bit on this device but since I'm used to samsung, it all takes a while to figure things out
Got it unlocked/rooted fine, but I want to make sure I have something to fall back on in case of trouble.
I've been searching for this fw without any luck. Any chance some one got it and can share it?
NPPS25.137-72-4
Or if anyone can suggest a different one that could work. ( I don't really understand the fw names yet)
Thanks in advance.
Click to expand...
Click to collapse
Take a twrp backup .. a clean one..
tys0n said:
Hi. Sorry for bumping an old thread but I thought it was better then to make a new one.
I bought this phone a few days ago and it had NPPS25.137-72-4 when delivered. Been trying to read up a bit on this device but since I'm used to samsung, it all takes a while to figure things out
Got it unlocked/rooted fine, but I want to make sure I have something to fall back on in case of trouble.
I've been searching for this fw without any luck. Any chance some one got it and can share it?
NPPS25.137-72-4
Or if anyone can suggest a different one that could work. ( I don't really understand the fw names yet)
Thanks in advance.
Click to expand...
Click to collapse
There's no flash able zips of stock ROMs here unfortunately. Weird for me too since I was Samsung through and through. Take a back up of your own ROM via TWRP or you can use the debloated stock ROM by Fedray on the ROM forum.
showlyshah said:
Take a twrp backup .. a clean one..
Click to expand...
Click to collapse
Smonic said:
There's no flash able zips of stock ROMs here unfortunately. Weird for me too since I was Samsung through and through. Take a back up of your own ROM via TWRP or you can use the debloated stock ROM by Fedray on the ROM forum.
Click to expand...
Click to collapse
Thanks for your answers.Thats actualy first thing I did after flashing twrp to have a clean backup of system and boot.
I also made a few partition backups in terminal, like persist, oem, modem and a few others so hopefully I'm fine.
Do you guys know if I can take stock recovery from lower version fw in case I would ever need it again?
I highly doubt I ever will, but just in case
Edit: If anyone needs a system/boot backup of this fw, just let me know and I'll upload it.
tys0n said:
Thanks for your answers.Thats actualy first thing I did after flashing twrp to have a clean backup of system and boot.
I also made a few partition backups in terminal, like persist, oem, modem and a few others so hopefully I'm fine.
Do you guys know if I can take stock recovery from lower version fw in case I would ever need it again?
I highly doubt I ever will, but just in case
Edit: If anyone needs a system/boot backup of this fw, just let me know and I'll upload it.
Click to expand...
Click to collapse
Infact i need a full twrp backup of the exact same firmware.. if u can uplaod.. please do that.. btw.. if u need recovery image i can extract it from ota.. and send to you.
showlyshah said:
Infact i need a full twrp backup of the exact same firmware.. if u can uplaod.. please do that.. btw.. if u need recovery image i can extract it from ota.. and send to you.
Click to expand...
Click to collapse
Yes please. If you could do that, that would be great
I'll zip the backup and upload it in a few hours when I get to my computer.
tys0n said:
Yes please. If you could do that, that would be great
I'll zip the backup and upload it in a few hours when I get to my computer.
Click to expand...
Click to collapse
Me too.. i will do it tomorrow itself.
Ok, here we go. Stock TWRP backup from XT1676.
NPPS25.137-72-4
CEDRIC_XT1676-NPPS25.137-72-4_TWRP.zip
Unzip, put in your twrp backup folder and restore.
https://firmware.gem-flash.com/index.php?a=browse&b=category&id=13304
I got this too..

How To Get Working Apn + Hotspot After Upgrade to NCQ26.69-64+ or With SPerry XT1766.

You Need From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which Is Not For The XT1766 if You Flash This You Will Loose The Baseband And SoftBrick The Phone .
And From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip This One Have The Ratio And Modem And FsG images Of Your Phone Thats Why We Need It .
Lets Begin , if You Have This Phone You Had Noticed That After Upgrade To The Last Version The Ability To Add Apn And Modify Them And The Hotspot Wont Work Any More This Is Because The Locked Everything Up For No Reason Well Money Is the Reason , We need to Extract XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in a folder and SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
in other folder , you must know your way to flash servicefile.xml on linux or windows no details here and bootloader unlocked , well that is easy , now we have to put the files : the 2 OEM files , the 4 System Files , boot.img ,
{{{ bootloader "NO NEED" This Work Before Just Because v48 and v56 have the same bootloader version }}} , recovey.img from SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip inside the folder that have the XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip firmware and replace those files , optional for rooting you can replace recovery.img with the Squid2 TWRP recovery.img file and The boot.img Patched Fixed F2FS kernel which is based in the stock firmware kernel sources that we are going to flash here and then flash supersu inside twrp , Well Thats It after Flashing This Downgrade Custom stock you will have back the ability to ADD apn's Again And Use The Hotspot included in the Stock Firmware , Cheers , Thanks To All The People Involved in the development for Perry Moto E4 Thanks Everybody i hope this help somebody with the XT1766. :laugh:
EDIT HELLO
Things Have Changed Dont Try To Downgrade Bootloader or The Phone Will Get Hard Bricked , Why well bootloader versions on new firmwares have been upgraded please check all the information on the Bootloader/Fastboot
MODE Of The Phone Which Version You Have , Now For Example If You Are On Version NCQS26.69-64-5 you will need SPERRY_SPRINT_NCQS26.69-64-5_cid50_XT1766-SS_7.1.1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml full package then extract and now you will need SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml extract it too , Now Just Move The 2 Oems Images And 4 System Images And Boot Image To SPERRY_SPRINT_NCQS26.69-64-5_cid50_XT1766-SS_7.1.1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml Folder Next Look for RSD_Lite_Motorola_XML_To_Batch_Script on Google Download it And Watch The Video Of Rootjunky on how to use it. Very Simple Wish All Of You Luck And im Not Responsible Of Any Damage Of Your Phone Use This Guide On Your Own Terms.
ozmage said:
You Need From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which Is Not For The XT1766 if You Flash This You Will Loose The Baseband And SoftBrick The Phone .
And From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip This One Have The Ratio And Modem And FsG images Of Your Phone Thats Why We Need It .
Lets Begin , if You Have This Phone You Had Noticed That After Upgrade To The Last Version The Ability To Add Apn And Modify Them And The Hotspot Wont Work Any More This Is Because The Locked Everything Up For No Reason Well Money Is the Reason , We need to Extract XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in a folder and SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
in other folder , you must know your way to flash servicefile.xml on linux or windows no details here and bootloader unlocked , well that is easy , now we have to put the files : the 2 OEM files , the 4 System Files , boot.img , bootloader , recovey.img from SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip inside the folder that have the XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip firmware and replace those files , optional for rooting you can replace recovery.img with the Squid2 TWRP recovery.img file and The boot.img Patched Fixed F2FS kernel which is based in the stock firmware kernel sources that we are going to flash here and then flash supersu inside twrp , Well Thats It after Flashing This Downgrade Custom stock you will have back the ability to ADD apn's Again And Use The Hotspot included in the Stock Firmware , Cheers , Thanks To All The People Involved in the development for Perry Moto E4 Thanks Everybody i hope this help somebody with the XT1766. :laugh:
Click to expand...
Click to collapse
I flashed the Sprint firmware and had data working on my XT1766 after it got it's carrier update, the Sprint firmware does not soft brick the phone as I flashed it and can confirm it doesn't soft brick it, so you are incorrect in saying that.
I'm not sure if I did something wrong but after trying this, my phone kept saying, "phone stopped working". I had backed up my phone so I restored it. Any ideas on what might have happened?
dlinderaz said:
I'm not sure if I did something wrong but after trying this, my phone kept saying, "phone stopped working". I had backed up my phone so I restored it. Any ideas on what might have happened?
Click to expand...
Click to collapse
Yeah, don't try to restore system apps. Phone app has some quirks, it's in oem. There are oem hide xml files and so on. Why try to restore phone?
madbat99 said:
Yeah, don't try to restore system apps. Phone app has some quirks, it's in oem. There are oem hide xml files and so on. Why try to restore phone?
Click to expand...
Click to collapse
I restored the entire thing after flashed the indicated files causing the error message.
dlinderaz said:
I restored the entire thing after flashed the indicated files causing the error message.
Click to expand...
Click to collapse
Oh, I never tried this method. I used rsd lite to flash the firmware (the one op says will brick you, it didn't by the way). After flashing new firmware I restored only data, nothing system or boot related, and have had no issues.
madbat99 said:
Oh, I never tried this method. I used rsd lite to flash the firmware (the one op says will brick you, it didn't by the way). After flashing new firmware I restored only data, nothing system or boot related, and have had no issues.
Click to expand...
Click to collapse
Thank you so much for the info. I'll give that a try tomorrow. I appreciate your time and help.
dlinderaz said:
Thank you so much for the info. I'll give that a try tomorrow. I appreciate your time and help.
Click to expand...
Click to collapse
Keep in mind I have the virgin mobile version (sprint xt1766). Don't know which one you have. Some have had trouble with rsdlite on Windows 10, it worked fine for me though.
I used rsdlite from here
The newest one, 6.2.4 I think
Apn Xt1766
I just want to add apn and want to use hot spot again
As the phone is updated on latest build ..
I don't want the root access..
What's should I try then from previous build , can anyone
Guide me easy steps plz.
Xt1766 how to get working apn
Will anyone confirm
danishamini.saifi said:
Will anyone confirm
Click to expand...
Click to collapse
The steps are there. Just don't use the root part if you don't want root. Once you switch the files, flash the service file.xml with rsdlite.
madbat99 said:
The steps are there. Just don't use the root part if you don't want root. Once you switch the files, flash the service file.xml with rsdlite.
Click to expand...
Click to collapse
Thanks, ill try and share the result.
I've tested it.. It worked for me but there is an issue
With this method occurred as well..
While Turing on the phone " BAD KEY" msg pops up on
Black display for 4-5 seconds and then mobile shows Motorola logo...
Now what is suppose to be done to get rid off BAD KEY msg.
danishamini.saifi said:
I've tested it.. It worked for me but there is an issue
With this method occurred as well..
While Turing on the phone " BAD KEY" msg pops up on
Black display for 4-5 seconds and then mobile shows Motorola logo...
Now what is suppose to be done to get rid off BAD KEY msg.
Click to expand...
Click to collapse
That's normal if you unlock the bootloader. Flash the no verity opt encrypt, or magisk, and it will change from bad key to n/a. But there will always be a message if you unlock the bootloader.
I know you said you don't need root, so that bad key message is there to stay.
madbat99 said:
That's normal if you unlock the bootloader. Flash the no verity opt encrypt, or magisk, and it will change from bad key to n/a. But there will always be a message if you unlock the bootloader.
I know you said you don't need root, so that bad key message is there to stay.
Click to expand...
Click to collapse
oh... i got it, thanks...
just one thing more please, if i go towards rooting the phone as well, will this be removed or N/A or something will be there?
danishamini.saifi said:
oh... i got it, thanks...
just one thing more please, if i go towards rooting the phone as well, will this be removed or N/A or something will be there?
Click to expand...
Click to collapse
N/A will be there. But you can flash a new boot logo to kinda hide it. Instead of a black screen, any logo you want, maybe with a white strip at the top to hide it. I'll get you a link.
Here are some good ones. https://forum.xda-developers.com/mo...om-boot-logos-converted-t3759320/post75787882
And here is the guide to make your own
https://forum.xda-developers.com/moto-e4/how-to/replace-n-boot-image-t3687212/post74118155
@madbat99
Everything you shared was perfect I made my own logo to hide bad key apn working ..
Now I want to have thebroot access in my phone XT1766..
TWRP IS ALREADY ISTALLED ON THE PHONE AS I AM FLASHING LOGOS..
WHAT SHOULD I INSTALLED TO GET ROOT ACCESS ..
SUPER USER ETC.. PLZ SHARE WITH ME..
and the main reason to have the root access is, I want to block or disable OTA update ..
Plz confirm, how will it be possible ..as I downgraded to get working APN But phone updated again now.
I want the phone to be stopped from being updated..
Plz help me out fixing this..
Thanks
danishamini.saifi said:
@madbat99
Everything you shared was perfect I made my own logo to hide bad key apn working ..
Now I want to have thebroot access in my phone XT1766..
TWRP IS ALREADY ISTALLED ON THE PHONE AS I AM FLASHING LOGOS..
WHAT SHOULD I INSTALLED TO GET ROOT ACCESS ..
SUPER USER ETC.. PLZ SHARE WITH ME..
and the main reason to have the root access is, I want to block or disable OTA update ..
Plz confirm, how will it be possible ..as I downgraded to get working APN But phone updated again now.
I want the phone to be stopped from being updated..
Plz help me out fixing this..
Thanks
Click to expand...
Click to collapse
Just don't accept the update. You can root by flashing magisk. You will still receive update notification. You'll need to disable the moto update app. I forget which one exactly. But your phone shouldn't be able to do ota updates once you are rooted with twrp installed. The update will fail.
here is the root thread.
madbat99 said:
Just don't accept the update. You can root by flashing magisk. You will still receive update notification. You'll need to disable the moto update app. I forget which one exactly. But your phone shouldn't be able to do ota updates once you are rooted with twrp installed. The update will fail.
here is the root thread.
Click to expand...
Click to collapse
Thank you. I wish I had known this. I had to flash the stock recovery, etc for the updates to work. A little bit of an unnecessary hastle.
dlinderaz said:
Thank you. I wish I had known this. I had to flash the stock recovery, etc for the updates to work. A little bit of an unnecessary hastle.
Click to expand...
Click to collapse
Ota updates will likely always fail if you have twrp, or have modified the system in any way. The ota performs many checks (assert props) to see if the system is clean. If any asserts fail, the ota will fail. Even restoring the stock recovery doesn't guarantee the ota will work.

Moto z play stuck in fastboot

So i kinda ****ed up on trying to install a custom rom, dint make a backup and had wrong bootloader for the rom i had planned. After trying different things to fix it. it went from bad to worse ( i think) and now im stuck in the fastboot menu. TWRP cannot boot up, it has error messages but it go's away fast so i cant see them.
Can i still recover my phone?
Somebodyz said:
So i kinda ****ed up on trying to install a custom rom, dint make a backup and had wrong bootloader for the rom i had planned. After trying different things to fix it. it went from bad to worse ( i think) and now im stuck in the fastboot menu. TWRP cannot boot up, it has error messages but it go's away fast so i cant see them.
Can i still recover my phone?
Click to expand...
Click to collapse
So do you have a backup of stock or anything?
If not, RSD lite latest 7.1.1 stock
https://forum.xda-developers.com/mo...ock-images-t3736767/post75236696#post75236696
KrisM22 said:
So do you have a backup of stock or anything?
If not, RSD lite latest 7.1.1 stock
https://forum.xda-developers.com/mo...ock-images-t3736767/post75236696#post75236696
Click to expand...
Click to collapse
Did not make a backup no, RSD doesnt see my phone though. how would i go about fixing it? Windows does see my phone as fastboost addison s
Somebodyz said:
Did not make a backup no, RSD doesnt see my phone though. how would i go about fixing it? Windows does see my phone as fastboost addison s
Click to expand...
Click to collapse
What version of RSD do you have - it's on the top bar when you stat RSD.
KrisM22 said:
What version of RSD do you have - it's on the top bar when you stat RSD.
Click to expand...
Click to collapse
the version is : RSD Lite v6.2.4 multi-flash / multiflex tool. is that the correct one?
Somebodyz said:
the version is : RSD Lite v6.2.4 multi-flash / multiflex tool. is that the correct one?
Click to expand...
Click to collapse
yes, now try a number of different cables. Make sure your phone is in fastboot mode.
That work?
KrisM22 said:
That work?
Click to expand...
Click to collapse
Tried to find, and failed in, finding other cables since this is the only phone with usb-c. are there other possibilites or should i buy a new cable?
Somebodyz said:
Tried to find, and failed in, finding other cables since this is the only phone with usb-c. are there other possibilites or should i buy a new cable?
Click to expand...
Click to collapse
Only reason I suggested that was because of second post on this thread
https://forum.xda-developers.com/mo...ock-images-t3736767/post75236696#post75236696
I did one a couple days ago with an old A to micro cable and a cheap ($3 for 5) Micro female to C male adapter that I got on ebay. Worked fine. Other than that I have no ideas. Sorry. I understand there may be some need to have cables with 56K ohm resisters if used for charging, but I don't have any of those yet - still using old stuff.
KrisM22 said:
Only reason I suggested that was because of second post on this thread
https://forum.xda-developers.com/mo...ock-images-t3736767/post75236696#post75236696
I did one a couple days ago with an old A to micro cable and a cheap ($3 for 5) Micro female to C male adapter that I got on ebay. Worked fine. Other than that I have no ideas. Sorry. I understand there may be some need to have cables with 56K ohm resisters if used for charging, but I don't have any of those yet - still using old stuff.
Click to expand...
Click to collapse
So i managed to get it to connect with a different cable (yeay), but i was wondering how much the stock rom version affects stuff? since there seem to be of stock roms to choose from. after ****ing it up i dont want to do that again.
moto z play
product/variant: addison xt1635-02 32gb p7
bootloader: c0.14 (sha-9325e5f, 2016-07-11)
Would anyone be able to give any pointers to what specific one i need?
Try to reflash the latest TWRP
mijing said:
Try to reflash the latest TWRP
Click to expand...
Click to collapse
if it try to boot it from cmd or if i try to reflash it, it says: cannot mount /data and unable to find crypto footer. on the top line. RSD Lite sees my phone now though, so do i need to reflash twrp?
Somebodyz said:
if it try to boot it from cmd or if i try to reflash it, it says: cannot mount /data and unable to find crypto footer. on the top line. RSD Lite sees my phone now though, so do i need to reflash twrp?
Click to expand...
Click to collapse
Did you unlock your bootloader before flashing the TWRP?
Twrp reflash is will not be damage our phone you can try it ?
mijing said:
Did you unlock your bootloader before flashing the TWRP?
Twrp reflash is will not be damage our phone you can try it
Click to expand...
Click to collapse
as i said i did try to reflash it and it gave me that message. and yea i did unlock the bootloader first.
Somebodyz said:
So i managed to get it to connect with a different cable (yeay), but i was wondering how much the stock rom version affects stuff? since there seem to be of stock roms to choose from. after ****ing it up i dont want to do that again.
moto z play
product/variant: addison xt1635-02 32gb p7
bootloader: c0.14 (sha-9325e5f, 2016-07-11)
Would anyone be able to give any pointers to what specific one i need?
Click to expand...
Click to collapse
Yay!!! cable!!! Who would have guessed!! Thanks @okaban !!!
Which one you choose depends mostly on which country or area you are in because flashing one from another country will mess things up (wrong radio frequencies). Then choose the latest one - never one earlier than where you were at. So what country/area are you in? and I'll try to help you choose.
KrisM22 said:
Yay!!! cable!!! Who would have guessed!! Thanks @okaban !!!
Which one you choose depends mostly on which country or area you are in because flashing one from another country will mess things up (wrong radio frequencies). Then choose the latest one - never one earlier than where you were at. So what country/area are you in? and I'll try to help you choose.
Click to expand...
Click to collapse
yea had to wait till today for the cables to arive, hence the delay.
But im from the netherlands (europe). and im guessing the one i was at is from 2016-07-11, atleast thats the date at the BL: message
Somebodyz said:
yea had to wait till today for the cables to arive, hence the delay.
But im from the netherlands (europe). and im guessing the one i was at is from 2016-07-11, atleast thats the date at the BL: message
Click to expand...
Click to collapse
Lots of questions for you to answer in here so read till end before start!
Okay. We need an expert (someone in Netherlands who has done it!!!)
I was thinking you were reteu and this post would agree
https://forum.xda-developers.com/showpost.php?p=72013707&postcount=126
though not totally certain.
The only rom I see for reteu is 24-104-25 which if you d/l and expand it (which I did) is 6.0.1 .
- - - - -
I didn't ask - are you able to boot to stock now?
- - - - - - -
Back to first post, you say you got error messages from twrp when you tried to flash a custom ROM. This would be typical if you were still on 6.x bootloader. and trying to flash a custom 8.x ROM.
So:
1) Had you ever updated stock (ota) to nougat?
2) did you go to motorola and unlock bootloader?
if no to update and yes to unlock, let's take @mijing 's idea and reflash TWRP, though I am going to suggest you go back in time a bit and flash this one:
https://androidfilehost.com/?fid=745425885120744582
That one will work for flashing 7.x custom ROMs and is the one I am using at the moment. It will not deal with 8.x custom ROMs but we can easily deal with that later.
To flash TWRP:
boot to fastboot on phone
connect via (good ) cable
On PC in terminal
To temporarily boot this recovery: (substitute actual name of TWRP you downloaded)
Code:
fastboot boot twrp.img
Don't reboot:
use vol up/dn to step to recovery and press power and see if it in fact boots to TWRP.
If it does, then boot back to bootloader and
To permanently flash it: again substitute correct name of img
Code:
fastboot flash recovery twrp.img
If that works that should get you going for flashing 7.x custom ROMs,
though if you want stock you would have to take a CHANCE and RSD that one above. If that works you would still have to flash TWRP. It would NOT affect your bootloader-unlock status.
KrisM22 said:
Lots of questions for you to answer in here so read till end before start!
Okay. We need an expert (someone in Netherlands who has done it!!!)
I was thinking you were reteu and this post would agree
https://forum.xda-developers.com/showpost.php?p=72013707&postcount=126
though not totally certain.
The only rom I see for reteu is 24-104-25 which if you d/l and expand it (which I did) is 6.0.1 .
- - - - -
I didn't ask - are you able to boot to stock now?
- - - - - - -
Back to first post, you say you got error messages from twrp when you tried to flash a custom ROM. This would be typical if you were still on 6.x bootloader. and trying to flash a custom 8.x ROM.
So:
1) Had you ever updated stock (ota) to nougat?
2) did you go to motorola and unlock bootloader?
if no to update and yes to unlock, let's take @mijing 's idea and reflash TWRP, though I am going to suggest you go back in time a bit and flash this one:
https://androidfilehost.com/?fid=745425885120744582
That one will work for flashing 7.x custom ROMs and is the one I am using at the moment. It will not deal with 8.x custom ROMs but we can easily deal with that later.
To flash TWRP:
boot to fastboot on phone
connect via (good ) cable
On PC in terminal
To temporarily boot this recovery: (substitute actual name of TWRP you downloaded)
Code:
fastboot boot twrp.img
Don't reboot:
use vol up/dn to step to recovery and press power and see if it in fact boots to TWRP.
If it does, then boot back to bootloader and
To permanently flash it: again substitute correct name of img
Code:
fastboot flash recovery twrp.img
If that works that should get you going for flashing 7.x custom ROMs,
though if you want stock you would have to take a CHANCE and RSD that one above. If that works you would still have to flash TWRP. It would NOT affect your bootloader-unlock status.
Click to expand...
Click to collapse
i dint make a backup at the start so i lost all OS. i dont think i updated the stock the nougat, and i dint know what it meant so i ignored it (basicly where this mess started)
and i did manage to flash the twrp you sent me.
and i dint really want stock i thought it would be better to go back to it.
i want this rom: https://forum.xda-developers.com/moto-z-play/development/rom-unofficial-cyanogenmod-14-1-t3495644
it says i need a nougat bootloader, do i have that now or do i still need to do stuff to get this rom?
(also a massive thanks for all of your help so far)
Somebodyz said:
i dint make a backup at the start so i lost all OS. i dont think i updated the stock the nougat, and i dint know what it meant so i ignored it (basicly where this mess started)
and i did manage to flash the twrp you sent me.
and i dint really want stock i thought it would be better to go back to it.
i want this rom: https://forum.xda-developers.com/moto-z-play/development/rom-unofficial-cyanogenmod-14-1-t3495644
it says i need a nougat bootloader, do i have that now or do i still need to do stuff to get this rom?
(also a massive thanks for all of your help so far)
Click to expand...
Click to collapse
This has all been re-written:
You're welcome! and thanks to @mijing !!!!!!
Wow - we got much further than I thought! Good work!!!
No, I believe you have a MM B/L,
The problem with the 7.x bootloader mod is that once you apply it I believe you can never RSD lite back to 6.0.1 or you will brick your phone and need to send it to Moto for blankflash. Course you may decide that's a moot point.
I don't know if LinOS 14 (7.x) needs a 7.x bootloader - I think I was wrong - I think it may indeed. LinOS 14 should be a good one for you to play with and should flash fine with that TWRP. I also highly recommend
https://forum.xda-developers.com/moto-z-play/development/rom-aospextended-rom-v4-6-amulyax-t3735010
which I flashed yesterday and love.
Both those should flash fine with the Deh TWRP you have on.
Keep us posted.
---------- Post added at 03:14 PM ---------- Previous post was at 03:05 PM ----------
@somebodyz I just redid the above post - a lot was wrong.
KrisM22 said:
This has all been re-written:
You're welcome! and thanks to @mijing !!!!!!
Wow - we got much further than I thought! Good work!!!
No, I believe you have a MM B/L,
The problem with the 7.x bootloader mod is that once you apply it I believe you can never RSD lite back to 6.0.1 or you will brick your phone and need to send it to Moto for blankflash. Course you may decide that's a moot point.
I don't know if LinOS 14 (7.x) needs a 7.x bootloader - I think I was wrong - I think it may indeed. LinOS 14 should be a good one for you to play with and should flash fine with that TWRP. I also highly recommend
https://forum.xda-developers.com/moto-z-play/development/rom-aospextended-rom-v4-6-amulyax-t3735010
which I flashed yesterday and love.
Both those should flash fine with the Deh TWRP you have on.
Keep us posted.
---------- Post added at 03:14 PM ---------- Previous post was at 03:05 PM ----------
@somebodyz I just redid the above post - a lot was wrong.
Click to expand...
Click to collapse
So adb devices doesnt let me see my device. but adb sideload works. only problem is, is: This package supports bootloaders: 0xc105, 0xC106, 0xC107, 0xC112, 0xC113 and this device has bootloader 0xc014. do i need an older version then or what should i do?
i just found this https://forum.xda-developers.com/showpost.php?p=74069195&postcount=91, is that a good thing for me to do?

Downgrade to emui 5

I got a Huawei mate se and didn't realize that allowing it to update to Android o would block the bootloader unlock tool. Is there anyway to downgrade my firmware so I can unlock my bootloader?
voldomart13 said:
I got a Huawei mate se and didn't realize that allowing it to update to Android o would block the bootloader unlock tool. Is there anyway to downgrade my firmware so I can unlock my bootloader?
Click to expand...
Click to collapse
There is a roll-back ROM on firmware finder. As long as it shows your IMEI as approoved, it should install.
That's the nice clean way.
There is a dirty ( possibly dangerous way ) by using the nougat service ROM. That ROM is for bnd-L21, so not sure how an unlocked bootloader will handle it. It has worked on unlocked before.
mrmazak said:
There is a roll-back ROM on firmware finder. As long as it shows your IMEI as approoved, it should install.
That's the nice clean way.
There is a dirty ( possibly dangerous way ) by using the nougat service ROM. That ROM is for bnd-L21, so not sure how an unlocked bootloader will handle it. It has worked on unlocked before.
Click to expand...
Click to collapse
I have been attempting to use firmware finder but I can't wrap my head around actually pushing the update. I heard you need an outdated version of hisuite but no one specifies what version. Any help is appreciated =)
voldomart13 said:
I have been attempting to use firmware finder but I can't wrap my head around actually pushing the update. I heard you need an outdated version of hisuite but no one specifies what version. Any help is appreciated =)
Click to expand...
Click to collapse
Insttall firmware finder from playstore.
In the app select the "hamburger" menu, from top left corner. Select instructions. Either watch videos, or read the text guides
mrmazak said:
Insttall firmware finder from playstore.
In the app select the "hamburger" menu, from top left corner. Select instructions. Either watch videos, or read the text guides
Click to expand...
Click to collapse
The mobile app as far as I can tell doesn't work on newer versions of android. They even have a disclaimer mentioning that the app only works for older devices now.
voldomart13 said:
The mobile app as far as I can tell doesn't work on newer versions of android. They even have a disclaimer mentioning that the app only works for older devices now.
Click to expand...
Click to collapse
You are not on 8.1, the app can work.
But I was only referencing the app for the guides linked inside.
You should be able to use it to flash b330. Which should work in DC
mrmazak said:
You are not on 8.1, the app can work.
But I was only referencing the app for the guides linked inside.
You should be able to use it to flash b330. Which should work in DC
Click to expand...
Click to collapse
My bad I am on 8.0 to be specific bnd-l34 8.0.0.341(c567) and as much as I've tried I can not get it to work on the phone following along on the videos. They are using the app on emui 5.0 not 8.0. It doesn't work anymore on 8.0
All there videos revolve around emui 5.0 or lower. It stopped working with 8.0
voldomart13 said:
My bad I am on 8.0 to be specific bnd-l34 8.0.0.341(c567) and as much as I've tried I can not get it to work on the phone following along on the videos. They are using the app on emui 5.0 not 8.0. It doesn't work anymore on 8.0
Click to expand...
Click to collapse
Because the locked bootloader, you can only use the firmwares that are approoved.
Chances are , the only one that's approoved is the b330
And if not , then only option is the service-rom. Followed by dc-unlock, then the hwota and correct ROM
It has been done.
There should be confirmation back in the mate thread somewhere.
mrmazak said:
Because the locked bootloader, you can only use the firmwares that are approoved.
Chances are , the only one that's approoved is the b330
And if not , then only option is the service-rom. Followed by dc-unlock, then the hwota and correct ROM
It has been done.
There should be confirmation back in the mate thread somewhere.
Click to expand...
Click to collapse
Which mate thread?
voldomart13 said:
Which mate thread?
Click to expand...
Click to collapse
I'm searching. I know i have recommended this process many times, and got many success responses. But I am striking out in finding threads with confirmed responses.
This search only shows 4 found matches for the search info. One does fit real good, but the author has made it sound , not real credible.
https://forum.xda-developers.com/search/forum/7100?query=unlock mate service-rom#posts
mrmazak said:
Because the locked bootloader, you can only use the firmwares that are approoved.
Chances are , the only one that's approoved is the b330
And if not , then only option is the service-rom. Followed by dc-unlock, then the hwota and correct ROM
It has been done.
There should be confirmation back in the mate thread somewhere.
Click to expand...
Click to collapse
What about this method? https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/
mrmazak said:
I'm searching. I know i have recommended this process many times, and got many success responses. But I am striking out in finding threads with confirmed responses.
This search only shows 4 found matches for the search info. One does fit real good, but the author has made it sound , not real credible.
https://forum.xda-developers.com/search/forum/7100?query=unlock mate service-rom#posts
Click to expand...
Click to collapse
This post you made here sounds doable.
This service rom so far has been only thing we found that will load with three button method (dload)
But it is not a full rom to keep on device. It needs you to follow up with flashing fullOTA of your correct version after.
https://www.androidfilehost.com/?fid...83647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Enlighten me what is huru or hwota? If I were to flash this does it boot up into android or is it non functional?
voldomart13 said:
This post you made here sounds doable.
This service rom so far has been only thing we found that will load with three button method (dload)
But it is not a full rom to keep on device. It needs you to follow up with flashing fullOTA of your correct version after.
https://www.androidfilehost.com/?fid...83647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Enlighten me what is huru or hwota? If I were to flash this does it boot up into android or is it non functional?
Click to expand...
Click to collapse
Yes, this should leave you able to boot. And with build level that should allow DC unlocked to give you the code.
Remember like I said before this is kind of a dirty way around and 'could' have issues unknown. Like what if DC does not give you a code, you would then be stuck . (Though you are stuck now)
Huru and hwota are very similar. They both use TWRP to give custom flashing control.
Hwota uses modified stock recovery to flash full ota files.
Huru repacks full ota files so that TWRP can flash them.
Since doth start with TWRP , bootloader unlock is needed.
mrmazak said:
Yes, this should leave you able to boot. And with build level that should allow DC unlocked to give you the code.
Remember like I said before this is kind of a dirty way around and 'could' have issues unknown. Like what if DC does not give you a code, you would then be stuck . (Though you are stuck now)
Huru and hwota are very similar. They both use TWRP to give custom flashing control.
Hwota uses modified stock recovery to flash full ota files.
Huru repacks full ota files so that TWRP can flash them.
Since doth start with TWRP , bootloader unlock is needed.
Click to expand...
Click to collapse
I see. And say dc cant get a code I would be stuck no way of recovery? Man I miss the days of samsung phones and using odin for upgrade/downgrade =/ been doing this stuff since samsung captivate days.
voldomart13 said:
I see. And say dc cant get a code I would be stuck no way of recovery? Man I miss the days of samsung phones and using odin for upgrade/downgrade =/ been doing this stuff since samsung captivate days.
Click to expand...
Click to collapse
Just spent most of the morning going back and forth with someone else with mate see, and they just did restored his device with the service ROM.
I do not now what he was restoring from, but he ended up with "unknown model" and default build number of 8.0.0.46
This is because of (probably) some data corrupt issue making the flash go bad. But he was able to run the ROM and unlock boooader.
Difference is he already had his unlock code.
https://forum.xda-developers.com/honor-7x/help/dload-method-stuck-5-t3821898
voldomart13 said:
I see. And say dc cant get a code I would be stuck no way of recovery? Man I miss the days of samsung phones and using odin for upgrade/downgrade =/ been doing this stuff since samsung captivate days.
Click to expand...
Click to collapse
Have you seen this guide?
It is for "official" hisuite roll-back
I have not rolled back so do not know it it works though.(I checked with my device, it shows no downgrade available)
I know the roll-back firmwarm listed on firmware finder was listed as "bond" and not "bnd". So this means not available "officially"
https://usermanual.wiki/Huawei/EMUI...roid70OperationInstructionpdf.1621060771/help

Categories

Resources