Related
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
JRSouth said:
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
Click to expand...
Click to collapse
i have the exact problem since saturday, you have to use the ATT firmware but i couldnt find it anywhere
also
please pm me if u fixed yours
Lactaid said:
please pm me if u fixed yours
Click to expand...
Click to collapse
Still no luck. I'm sure if we could find the AT&T firmware we would be able to recover. Unfortunately it appears it is not available on ASUS support and AT&T doesn't even provide firmware. Our only hope may be from a backup of another device that isn't bricked.
Does anybody know if we could possibly use the temporary CWM recovery used in the root method to flash to another ROM that is compatible with this device? Any input would be greatly appreciated.
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
JRSouth said:
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
Click to expand...
Click to collapse
ive literally tried everything, my device has been bricked for like 3 weeks now
Lactaid said:
ive literally tried everything, my device has been bricked for like 3 weeks now
Click to expand...
Click to collapse
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
JRSouth said:
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
Click to expand...
Click to collapse
i havent tried it yet, do you have a tutorial of it?
The truth hurts, your screwd. This is a budget phone. At&t will not support it. Throw away device my their standards.
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
http://forum.xda-developers.com/showpost.php?p=63323103&postcount=118
^^^This worked for me successfully!
Make sure to only restore system and disable MD5 Checksum Verification.
I have the same problem, what do I do with that file? How do I apply it through the SD, so I can apply update from SD? I forgot pin code to phone so i need to restore
need help
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
how do I flash this?
Hola, alguien lo consiguió hacer..???
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
Im getting an error that day footer is wrong :/
m1chb3ltr3 said:
Im getting an error that day footer is wrong :/
Click to expand...
Click to collapse
Wait, are you bricked and tried using that as the fix? I cant post links but Check out Asus, They have Firmware, Kernel (havent checked but read it earlier today), and Boot Unlock that you can get right from (assuming you have an account) My Products.
Also... Has anyone used that method recently?
Cathaterfish said:
Sorry I will give credit to DavePmer for his guide in minute, but qouting him for some reason wouldnt let me post, even when I removed the links? anyways I'll edit and give credit I promise
So my phone is stuck on the Asus Logo, I downloaded all of this and followed the instructions all the way up to:
11) now the fun part. open your microsd card and check the folder TWRP\BACKUPS see if it has a folder named
01234567890123456789 if it does great if not, not a problem just copy all the system files from the folder
you extracted TWRP-zf2e-ATT_12.16.10.7 to your microsd card TWRP\BACKUP\01234567890123456789\ whatever folder you have next\ in other words, replace your system.ext4.win000 files with my system.ext4.win000 file.
Replace your system.ext4.win001 with mine, and replace system.ext4.win00.md5 with mine as well as system.ext4.win001.md5 when done safely dismount the microsd card.
It then occurred to me that i should be more careful this time around... This was from October and although I ran across links saying for the most part that this was a good shot for fixing my ZE500CL, Z00D or whatever. But things have changed since then and I was wondering if this is still the best/easiest/safe route. I learned pretty quick that over looking things like OTA/Root or in my case Making assumptions is a fast path to really doing a number on your phone. (Honestly I just started even giving thought to rooting my phone, just considered them back ups I kept in a box). I now have the itch to do this right so hoping to fix this and go about this the right way.
Thanks for any input.
Currently DLing RussaiNBeaR, went and bought a card reader/writer. I was going to Download the firmware, kernel and boot unlock tool but currently staying at a place where im getting 160kbs on my DL's. So if I can get away with davepmer's guide that would be great, or something other or smaller than downloading 4gbs on this Internet Connection.
EDIT: Forgot to add that I haven't completed this step yet because the wording kind of tripped me up. And I want to do this right. When he says "in other words replace your system.ext4.win000 files with my system.ext4.win000 file." and then goes on and 3 more to the list. Does that mean only copy and replace those 4? or does that include all system.(whatever).(extension) files? Im sure it sounds really dumb or noobish but the fact that the next step is using twrp to restore using system only makes me afraid to do this part wrong.
Click to expand...
Click to collapse
ayuda
ATT ZE500CL/Z00D rom
A step in the root method is to download a rooter .img, then boot to download mode and enter a few commands, but it 'FAIL's everytime I try to check the id. I have the port right, I have all the drivers, etc, but it keeps failing no matter how many times I do it.
Anyone got any help at all? Having Marshmallow won't affect it, right
potential solution
nerdsabs.blogspot.com/2016/08/root-t-mobile-lg-g4-h811-guide-on-ubuntu.html
I found fastboot can boot into twrp and then root from there
magicwindow said:
A step in the root method is to download a rooter .img, then boot to download mode and enter a few commands, but it 'FAIL's everytime I try to check the id. I have the port right, I have all the drivers, etc, but it keeps failing no matter how many times I do it.
Anyone got any help at all? Having Marshmallow won't affect it, right
Click to expand...
Click to collapse
if you are tring to root phone that has bootloader locked . by flashing rootedsystem.img... then yes it doesnt work on MM you must be on Lp .. it only works onlollipop... and you need to know if you can downgrade first. cause on mine tmobile thers antiroll back V2 and V3 so V2 LP10n and MM20i the same but new 20oMM if i upgrade and then i want to downgrade ill brick phone.. so ask first what antirollback version you are on.. and if you could downgrade
About two weeks and a few days, I bought an LG-H815P (used - came in the box, with the same IMEI number and voucher) Stockrom with root, as I could not upgrade because of root, I decided to install a modified rom. Then my problems started: the device had the message [secure boot error / error code: 1002]. So I decided to install a new stockrom, I downloaded the LG site, tried it first with [LGMobile Support Tool], it did not work I did with [LG Bridge] as the program itself sent. By an unfortunate distraction I believe I have installed the wrong version Stockrom. My device simply erased, did not give a sign of life. After following some tutorials on the internet I was able to recover it with [QFIL], I installed all the drives of the tutorial I followed, at the end of the process instead of going into download mode, it enters [fastboot mode] and does not leave it. I tried several times the procedure [volume up + plug the USB] for a second the image download mode appears, but soon it goes to screen [fastboot mode] and does not leave it, never.
Help Please
https://drive.google.com/file/d/1bmk0BfBLbF2ufQEkhh4RnzEFXB6LJN88/view?usp=sharing
anyone can help ??
fmmarotte said:
anyone can help ??
Click to expand...
Click to collapse
Hello, there is a program called LGUP. You can downgrade/upgrade android using this tool with your device kdz files. I would recommend to install same android version as it was before. Plus you can install custom roms only same android version as it was original. So i think that was the reason why you can't boot up your phone now.
Here is simple tutorial how to install and use this tool i mentioned before: https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
If there will be error during android installation i add .dll file to change with original one (its path: LGUP/models/ directory.)
I hope you succed. Cheers.
naujokaz said:
Hello, there is a program called LGUP. You can downgrade/upgrade android using this tool with your device kdz files. I would recommend to install same android version as it was before. Plus you can install custom roms only same android version as it was original. So i think that was the reason why you can't boot up your phone now.
Here is simple tutorial how to install and use this tool i mentioned before: https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
If there will be error during android installation i add .dll file to change with original one (its path: LGUP/models/ directory.)
I hope you succed. Cheers.
Click to expand...
Click to collapse
Thanks for the interest. I have this program, but it did not help. I send photos for you to see. Thanks again
https://photos.app.goo.gl/LKxPvT6anHDa53Uk9
fmmarotte said:
Thanks for the interest. I have this program, but it did not help. I send photos for you to see. Thanks again
https://photos.app.goo.gl/LKxPvT6anHDa53Uk9
Click to expand...
Click to collapse
There is easy fix for that my friend. Use UPPERCUT program to fix this problem for not showing your device.
Cheers.
Edit: Here is the link for that: https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
No need to instal it, just run as superuser.
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
well it happened to me same the only way is to take it to realme service center or finde some one who have the oppo realme server to flash it like i did ifound a guy who have an official server the flash my device am from algeria
Update
Irvinukis said:
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
Click to expand...
Click to collapse
i´ve been "searching" (not too much to be honest) a way to flash my device, or even easier, to unlock the bootloader, once that is done, i will be able to do the next thing.
There are ways to "force" flashing modifying the hardware (i really don't want to that), other places suggest flashing a vbmeta.img, but i get back to the same, i need the bootloader
im actualy downloading UFI android tool, any update i will post it
Irvinukis said:
i´ve been "searching" (not too much to be honest) a way to flash my device, or even easier, to unlock the bootloader, once that is done, i will be able to do the next thing.
There are ways to "force" flashing modifying the hardware (i really don't want to that), other places suggest flashing a vbmeta.img, but i get back to the same, i need the bootloader
im actualy downloading UFI android tool, any update i will post it
Click to expand...
Click to collapse
well, my research and asking lead me to teh JIG usb to force the download mode, but i need to build it, does anyone have experience with this?
Firstly u need to flash twrp with adb and then use twrp to flash the rom. Then wipe and clean cache and you are done
eni_pog said:
Firstly u need to flash twrp with adb and then use twrp to flash the rom. Then wipe and clean cache and you are done
Click to expand...
Click to collapse
How can i do that with the bootloader blocked?
Can u explain me please?
The solution may be QFI and EMMC download tool, if unbrick the device i'll post a guide
i made a EDL cable that i'm gonna use to try, i don't even know if the device have that mode, i'm actually searching a micro usb to type c usb to try
Irvinukis said:
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
Click to expand...
Click to collapse
I think EDL mode flashing stock ROM is a good way, but is there compatible download tool or image? I have ever used Miflash to downgrade my bootloader locked Xiaomi 4c for unlocking bootloader in EDL mode (maybe "fasboot oem edl" ,"fastboot reboot-edl", or "fastboot reboot edl" command).
Unlocking the Mi4c Bootloader: https://forum.xda-developers.com/mi-4c/general/guide-unlocking-mi4c-bl-verification-t3336779
Miflash guide: https://xiaomi.eu/community/threads/miui-10-developer-rom-8-9-13-with-miflash.47542/
Did you get the solution same problem
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
did u get the solution bro
Not yet, i have some steps to do it, but now im facing the last step, the file don´t get recognized by the tool, this tool ask for a scatter file, and the one with QFIL, i need a xml firehose fle, and i havent found it
did u get the solution bro[/QUOTE]
What i got is this:
Emergency download: press vol + and vol - then connect it to the pc, the pc will recognize it as port 9008 com in the device manager of your pc, if yor phone reboots u have to disconnect the battery cause the battery forces the reboot of the EDL mode, maybe if you put the phone on EDL mode an then quickly flash would work with out tearing appart the device
Files: you need to install qualcomm drivers (https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/), download the .ofp file of your device (i get if from here https://oppostockrom.com/oppo-realme-x-rmx1901 ), then you need to download the tool you will use
here is where things are gonna get a bit harder
MSMDownload: this is the official tool, it came withe ofp file from the link i put before, the proble is you need a user and password, i haven't found where to get one official, its from oppo workers i guess
There is a cracked version, but don't recognizes the file
QFIL: its for qualcom devices (found it here https://androidmtk.com/download-qualcomm-flash-image-loader-qfil), this will let you flash every qualcomm device (or thats what they tell you), it shows the port, but ask for a xml file and a programer path (thing that i haven't found it yet)
Cracked MSMDownload: i found this https://www.techoxygen.com/msm-download-tool/ , https://romprovider.com/2020/02/flash-qualcomm-devices-using-msm-download-tools/, or this https://www.youtube.com/watch?v=0CKsEOfGGaQ
now, in my case the file its not recognized, it says incorrect scatter file, from here you can start diggin around, if you solve this please let me know
What i got is this:
Emergency download: press vol + and vol - then connect it to the pc said:
https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/),[/url] download the .ofp file of your device (i get if from here https://oppostockrom.com/oppo-realme-x-rmx1901 ), then you need to download the tool you will use
here is where things are gonna get a bit harder
MSMDownload: this is the official tool, it came withe ofp file from the link i put before, the proble is you need a user and password, i haven't found where to get one official, its from oppo workers i guess
There is a cracked version, but don't recognizes the file
QFIL: its for qualcom devices (found it here https://androidmtk.com/download-qualcomm-flash-image-loader-qfil), this will let you flash every qualcomm device (or thats what they tell you), it shows the port, but ask for a xml file and a programer path (thing that i haven't found it yet)
Cracked MSMDownload: i found this https://www.techoxygen.com/msm-download-tool/ , https://romprovider.com/2020/02/flash-qualcomm-devices-using-msm-download-tools/, or this
now, in my case the file its not recognized, it says incorrect scatter file, from here you can start diggin around, if you solve this please let me know
Click to expand...
Click to collapse
Hi man , did you try this method?
devilkar said:
Hi man , did you try this method?
Click to expand...
Click to collapse
yeah, i tried, but my bootloader its blocked
zaki789 said:
well it happened to me same the only way is to take it to realme service center or finde some one who have the oppo realme server to flash it like i did ifound a guy who have an official server the flash my device am from algeria
Click to expand...
Click to collapse
Hi bro i from algeria too can you tell where you flashed your phone, please adresse phone number any help, thank you
Hi guys, I'm stucked at this weird problem, basically when I type that command, fastboot reply with the list of options, like the command itself doesn't exist. Funny things is, to confirm it should work, I've tried to launch it with the device connected but not in fastboot, and it says "waiting for device" so the command actual exists.
I've tried so far: dl the last adb sdb from the official page
put the phone through fastboot using adb fastboot devices (it works)
launch the command: nothing works
This is hmm my 4th? Oneplus, so isn't like I'm new to unlock bootloaders but now I'm stucked, any ideas?
Of course OEM debug is on and also OEM unlock
ps.: I've also tried the old command but no resuts
here is the proper fastboot stuff you need. https://www.mediafire.com/file/xy5ifa0k1bz7tn4/fastboot.7z/file
with this one, fastboot flashing unlock
MrSteelX said:
here is the proper fastboot stuff you need. https://www.mediafire.com/file/xy5ifa0k1bz7tn4/fastboot.7z/file
with this one, fastboot flashing unlock
Click to expand...
Click to collapse
Ty, I've done it properly but sadly, I'm in the loop now, because following the guide to unlock:
because of the mismatch of the step 3 (which stated correctly I guess, "init_boot", and the pic, I've wrote boot instead of init_boot and flashed the patched magisk file to the boot.
Do you know/have where find the correct boot file to patch it back? My model is the CPH2449 A09 BA (europe) for what I remember...
Or, what guide can I follow withouth worst the situation... For now, I can still enter in the fastboot mode
If you flash init_boot to boot, it will hard brick your device. If you can't access fastboot now, then only way to recover is using MSM tool.
surajpai524 said:
If you flash init_boot to boot, it will hard brick your device. If you can't access fastboot now, then only way to recover is using MSM tool.
Click to expand...
Click to collapse
Yes I've noticed...someone helped me for 20 bucks from telegram so now its working...btw my mistake is due to the guide in the first post, as the pic there SHOWS to flash it to BOOT instead of INIT, please fix the guide and check it 200x times before post it wtf...
takui said:
Yes I've noticed...someone helped me for 20 bucks from telegram so now its working...btw my mistake is due to the guide in the first post, as the pic there SHOWS to flash it to BOOT instead of INIT, please fix the guide and check it 200x times before post it wtf...
Click to expand...
Click to collapse
I know.. That's why I used the other method to root. KernelSU method.
PROPER CPH2451 Root and Update instructions
This is for the CPH2451 Rom, but should also work for other roms. I have returned my device so I will not be updating this with future updates. I have validated these instructions work for CPH2451 NA version so it's your choice to follow it or...
forum.xda-developers.com
surajpai524 said:
I know.. That's why I used the other method to root. KernelSU method.
PROPER CPH2451 Root and Update instructions
This is for the CPH2451 Rom, but should also work for other roms. I have returned my device so I will not be updating this with future updates. I have validated these instructions work for CPH2451 NA version so it's your choice to follow it or...
forum.xda-developers.com
Click to expand...
Click to collapse
oh thanks for the link, ill check it after it finish to copy data from old one...this time it needs 1 hr (before 5 mins...lucky, without reason)... it worked for u then? Ok!
takui said:
oh thanks for the link, ill check it after it finish to copy data from old one...this time it needs 1 hr (before 5 mins...lucky, without reason)... it worked for u then? Ok!
Click to expand...
Click to collapse
Yes.. this method just needs booting and no hard flash. Also unlock bootloader and try setting passcode or patern before you copy data. If you can't set pattern, then relock and unlock bootloader till possible.
surajpai524 said:
Yes.. this method just needs booting and no hard flash. Also unlock bootloader and try setting passcode or patern before you copy data. If you can't set pattern, then relock and unlock bootloader till possible.
Click to expand...
Click to collapse
hey, did you perhaps found a way to fix fingerprint/passwords not working too? I guess that it is broken because I had one before unlocking it...so maybe locking it back, removing old one (if works) and unocking again, could work but...I'm still trying to figure out how to lock it back...maybe with enhanced tools... any ideas? Maybe I'm overthinking?
takui said:
hey, did you perhaps found a way to fix fingerprint/passwords not working too? I guess that it is broken because I had one before unlocking it...so maybe locking it back, removing old one (if works) and unocking again, could work but...I'm still trying to figure out how to lock it back...maybe with enhanced tools... any ideas? Maybe I'm overthinking?
Click to expand...
Click to collapse
Only is to fix phone lock issue is by relocking bootloader and unlocking it till it works. This must be done only if not rooted. No other method was found till now.
I've tried at least 5+ times, nothing. I've read first we need to flash stock then lock again, but idk how to flash stock frankly....now desperately I'm flashing it through enhanced fastboot tool, even if a guide said to avoid cuz some op10R got bricked... let's see....