Proximity problem(AOSP ROMS) - Xiaomi Mi Mix 2 Questions & Answers

Sometimes screen just turn off and wont turn on until call is done ,sometimes it works fine,sometimes it wont work at all and screen is on all the time...Anyone else had these problems?
Using latest OMNI build

Yes. I think it's quiet common. Just remove Proximity sensor. Download Magisk and disable Proximity sensor.

Yeah the proximity sensor is a little hit or miss. I keep hitting the mute button with my cheek during calls ?

I had this problem for a lot of time and just fixed it with a small piece of plastic, I cleaned the phone starting from the speaker and going both left and right while using an app that show sensors stats live, cleaning it restored full functionality, god it was so easy I can't believe it.

Related

[Q] Disable proximity sensor/Button to wake up screen

Hey guys.
I have a desire which has been dropped and the screen in the top left corner cracked. The proximity sensor is damaged, and I can test with various apps that this is indeed broken.
Now, when I get or make a call, the screen turns off, but since the proximity sensor isn't working, it's not turning on again when I move the phone away from my ear. So I wanted to know if anyone knew of a way of either completely disabling the feature, or a way of manually "waking" the screen again, by using any of the hard-buttons?
Thanks
what happens.. when you press power button
Sometimes it comes on, but mostly it doesn't... Regardless of which button I press...
I have read somwhere.. that by blowing some air over that part.. may clear any blocakge.. and proximity sensor works fine.. just try this .. use any vaccume cleaner.. and blow some air over sensor part..
And if that doesnt work.. search for this app in market "'Proximity Screen Off' ".. it might help you.
Yeah, I read that too... Tried blowing with compressed air even. The sensor is dead :/
Try this app.. it will switch your proximity sesor off after call ended.. its not mine just found. you might wanna try this
Dynde87 said:
Hey guys.
I have a desire which has been dropped and the screen in the top left corner cracked. The proximity sensor is damaged, and I can test with various apps that this is indeed broken.
Now, when I get or make a call, the screen turns off, but since the proximity sensor isn't working, it's not turning on again when I move the phone away from my ear. So I wanted to know if anyone knew of a way of either completely disabling the feature, or a way of manually "waking" the screen again, by using any of the hard-buttons?
Thanks
Click to expand...
Click to collapse
Hy, i have got the same problem !

Desire Z problems with proximity sensor?

I have a strange problem with my desire z.
If i not have a headset plugged in my smartphone, it reacts to the proximity sensor, and it work as it should.
But if i have a headset plugged in my smartphone, it didn't react to the proximity sensor, and display is ON the whole time
For some reason it ignores the proximity sensor.
For me this is a big bug.
Display don't have to lluminate my pocket during a phone call.
It eats battery juice and one accidentally pressing buttons.
Did someone have the same problem?
It sounds like you have the same problem I do on my G2. (I keep mine in my pocket also, so it is exposed to lots of lint.) Download the app "AndroSensor" from the market to verify that the proximity sensor is or is not detecting any changes. If it isn't, then it probably has debris blocking it. What fixes it for me is to either shoot some compressed air from one of those little cans into the speaker hole towards the left side of the phone (where the proximity sensor is) to clear it out. It might also work to vacuum the speaker hole also.
It is working.
It just doesn't work with a headset plugged in.
I have found a very good app, that firstly fixes the bug, and additionally also checks after the call if phone is in the pocket, and then immediately locks phone and disables screen
https://market.android.com/details?id=com.itsme4ucz.screenoff
Works without Root.
My Settings:
Enable Device Admin X
Enable during call only X
Cover and hold to lock the screen X
Timeout 0,25

Proximity Sensor does not turn off screen during calls Please Help...

After every reboot,the proximity sensor works fine for the first few calls. It properly turns off the screen during a call when the device is near your ears & turns the screen on when it is moved away.
But post 4-5 calls, the sensor stops working. Irrespective of how you hold the device, the screen does not get turned off. User needs to manually turn the screen off & on using the lock button. This continues for all calls after that.
Rebooting the device fixes this problem again but only for 4-5 calls...
Can Anyone Found The Fix???
xaamaa said:
After every reboot,the proximity sensor works fine for the first few calls. It properly turns off the screen during a call when the device is near your ears & turns the screen on when it is moved away.
But post 4-5 calls, the sensor stops working. Irrespective of how you hold the device, the screen does not get turned off. User needs to manually turn the screen off & on using the lock button. This continues for all calls after that.
Rebooting the device fixes this problem again but only for 4-5 calls...
Can Anyone Found The Fix???
Click to expand...
Click to collapse
Try an app called gravity screen. If it still does the same thing - works for a bit and then stops working - you may have to flash some stock software and start fresh or you may have a hardware issue. It could also be something simple like some dirt or dust in/around your proximity sensor that needs to be cleaned out; you'd have to be brave and open the phone to blow the debris out though. But try the gravity screen app first because it may be all you need.
And are you on stock ROM or AOSP/CM? Because AOSP/CM has always been wonky with the proximity sensor during calls.
startswithPendswithOOH said:
Try an app called gravity screen. If it still does the same thing - works for a bit and then stops working - you may have to flash some stock software and start fresh or you may have a hardware issue. It could also be something simple like some dirt or dust in/around your proximity sensor that needs to be cleaned out; you'd have to be brave and open the phone to blow the debris out though. But try the gravity screen app first because it may be all you need.
And are you on stock ROM or AOSP/CM? Because AOSP/CM has always been wonky with the proximity sensor during calls.
Click to expand...
Click to collapse
Thanks for your Reply i am on Stock rom i reflash it again but same thing happens i also tried gravity screen app but proximity sensor is not working may be you are right its a hardware issue...
Sent from my LG-D850 using XDA Forums Pro.

dark screen when have phone call

Hi guys
Since one day , my screen turns dark when having phone call or receiving phone call.
I can't type the keyboard and press the speaker button, which are inconvenient.
I have updated fw to fw_capricorn_miui_MI5S_V9.6.1.0.NAGCNFD_857fde8b41_7.0.zip
I have this issue on different roms including lineage 14 , lineage15, RR,and pixel experience .
Do anyone also have the issue and do anyone know how to solve it.?
My phone drop to ground once which cause screen crack. I am not sure whether this is the root cause.
Many thanks
The phone has on the front a proximity sensor, which is basically a small light sensor that checks if the phone is near the head or not. If it's near the head, it turns the screen of, so that you don't press any buttons while holding the phone to your ear.
I think either your sensor is broken or the crack always brings light to the sensor.
patoberli said:
The phone has on the front a proximity sensor, which is basically a small light sensor that checks if the phone is near the head or not. If it's near the head, it turns the screen of, so that you don't press any buttons while holding the phone to your ear.
I think either your sensor is broken or the crack always brings light to the sensor.
Click to expand...
Click to collapse
Could I disable this function?
Always disable light sensor or disable when have phone call
I had the same problem I thought the sensor was broken (you can test it with sensors test https://play.google.com/store/apps/details?id=asd.vector.sensor ). But it was ok, it turns out it was firmware related. When I downgraded my firmware the proximity sensor was working again...
Good Luck

On calls (touch)screen is disabled and won't turn on until call is terminated

When I make or receive calls the screen turns black and the touchscreen is disabled. I assume this is to avoid accidental keypresses with my ear or something, but my phone doesn't leave this mode until call ends.. I assume it would switch on screen/touch when leveled horizontally, but it doesn't.
I cannot end the call or do anything while the screen is disabled.
The only thing that works sometimes is to double press power button to turn on camera (thus enabling screen/touch), but it is no reliable method.
Sometimes, if I call a person not taking the call, without mailbox or automatic termination of connection, I have to reboot to phone to end this.
Any idea what I can do? Can this supposedly helpful behavior be switched off or fixed?
I am on Android stock 8.1.0 (OPM6.171019.030.H1, Aug 2018), rooted with most recent Magisk.
This bug is driving me nuts, so Thank You for any ideas or help!
Is there anything blocking the proximity sensor (below the right of the speaker)?
nowster said:
Is there anything blocking the proximity sensor (below the right of the speaker)?
Click to expand...
Click to collapse
Not that I know of. All is as normal as can be.
But right now, it seems the "trick" with the camera double click works more reliably (>50%) than before. Whatever reason..
If you've had the phone apart recently ... check proximity sensor. There's a little rubber piece tends to fall out.
Did You applied a screen protector recently? I had the same issue because of screen protector was covering the proximity sensor

Categories

Resources