Features:
*V1.0
-Kcal support .
*v2.0
-Add hotplug governor.
-Target TTL.
-NTFS support.
-Qnovo charging interface.
-Fingerprint speed increase.
-Decrease time to sleep. (to save battery)
-Force quickcharge
*V3.0
Adreno Idler
I/O scheduler "fiops"
westwood for networking
322 cpu freq
*V4.0
-source 9.0(pie)
-Now can install on encrypted devices
-Toggle fsync on/off(default: on)
-support exfat(but must be libs on system)
-Vibration Control
Bugs:
dt2w
Flash&Forget
Instruction:
Attention, you will lose the opportunity to update on OTA
I do not bear any responsibility for the broken gadgets
All files from instruction:
https://drive.google.com/folderview?id=1v86GlzWDXpYq8V91LPdJBeodjuY8shYD
1. Boot in TWRP flash JusticeKernel then Magisk. That's all.
(plz test on custom ROM and reply to me)
Required Reading . After installing custom kernel, you will not be able to simply upgrade the version of JusticeKernel.
You need to flash stock image boot.img. And repeat the instruction.
Big thanks to rama982!!!
https://github.com/rama982
And so, I'm not a developer. I just got an idea to make a custom kernel, so fixes are possible with a delay.
Bugs and offers in telegram @justice5613
With this kernel phone charges when it's powered off?
iniro said:
With this kernel phone charges when it's powered off?
Click to expand...
Click to collapse
OP clearly said that the only thing changed was KCAL support.
What of android version for kcal ?? V9.6.11.0 or androi pie beta
Pie kernel sources aren't released yet, so this should be based on Oreo.
Thank you bro ! I think more option will be available on the future ! What is exactly KCAL feature ????
---------- Post added at 06:32 PM ---------- Previous post was at 06:32 PM ----------
Did you fix the wifi problem ???
foudroid said:
What is exactly KCAL feature ????
Click to expand...
Click to collapse
Advanced color control for changing stuff like RGB values or min/max brightness.
Ahhh!! i suggested this alot while beta program is on like, pls settings for color calibration, and youre makin it happen ty!!!!!
work for gsi?
Any bugs on this kernel ??.any body try on androdi pie.or this is for android 8
Danvitayan said:
Any bugs on this kernel ??.any body try on androdi pie.or this is for android 8
Click to expand...
Click to collapse
Tested on Havok android 9.0 no bugs
No i mean on stock android pie not android 8 with gsi android 9
iniro said:
With this kernel phone charges when it's powered off?
Click to expand...
Click to collapse
If i fightly understand , you mean if phone power off thetly will carge? Ofcouse, it't in stock kernel
foudroid said:
Thank you bro ! I think more option will be available on the future ! What is exactly KCAL feature ????
---------- Post added at 06:32 PM ---------- Previous post was at 06:32 PM ----------
Did you fix the wifi problem ???
Click to expand...
Click to collapse
Wifi problem fixed. Thanks to rama982
Danvitayan said:
No i mean on stock android pie not android 8 with gsi android 9
Click to expand...
Click to collapse
They have different kernel source. Dont recomment trying. When Xiaomi fix all issues in 9.0 beta, then i create kernel for 9.0
Can flash with TWRP?
Can you enable dounle tap to wake.i want this feature but no rom support
Danvitayan said:
Can you enable dounle tap to wake.i want this feature but no rom support
Click to expand...
Click to collapse
I try search code, but I think Xiaomi better know why they disable this function
Sonthaya said:
Can flash with TWRP?
Click to expand...
Click to collapse
In TWRP only
artyom5613 said:
In TWRP only
Click to expand...
Click to collapse
A 1.0 version?
Related
Disclaimer:
I and XDA are not liable in a broken and bricked devices, doing so, take a nandroid backup and be cautious. Do at your own risk.
Click to expand...
Click to collapse
Info:
This kernel is based from the last google commit "2e34ea8". I hadn't seen a custom kernel in G1 work in MM update. The phone is much good but sadly the development of custom stuffs are bit poor. So it drives me to create a custom kernel. I think the battery of stock kernel is good enough, but it also lacks something IMHO. So basically I only added few things in this kernel(also knowing that this is my first custom kernel that ever made). I had cherry pick the things I think it suits my taste.
Click to expand...
Click to collapse
Features:
KCal Color Changer
CPU Freq can be control
AutoSMP Driver
Intelli Plug Driver
Simple GPU Algorithm
ExFAT Support
PM Kernel Driver
FSync Control
SELinux Permissive Mode On
Fast charging
Frandom
Zpool
LCD Notifier
I/O Scheduler:
sio
bfq
fiops
Some tweak and add small features
Click to expand...
Click to collapse
PS: I am a beginner and newbie on this stuff and still learning.
Credits:
@arvinquilao , for the patience at guiding me in this stuff.
@savoca, @neobuddy89, @faux123, @itsmerajit, @varunchitre15, @sandymanu for some sources and learning
XDA:DevDB Information
Eon Kernel, Kernel for the OEM Cross Device Development
Contributors
PineappleOwl
Source Code: https://github.com/PineappleOwl/msm-seed/tree/eon6.0
Kernel Special Features: KCal Support, Fast Charging, Intelliplug
Version Information
Status: Beta
Created 2016-01-20
Last Updated 2016-02-12
Some stuffs
Download Link:
eon-seed-1.0_boot
eon-seed-alpha_boot
Click to expand...
Click to collapse
Changelog:
February 12, 2016 [1.0]
Code:
Remove AutoSMP
Initial Port of Fast Charging
Add Frandom
Add Zpool
Add LCD Notifier
January 2016[ALPHA]
Code:
KCal Color Changer
CPU Freq can be control
AutoSMP Driver
Intelli Plug Driver
Simple GPU Algorithm
ExFAT Support
PM Kernel Driver
FSync Control
SELinux Permissive Mode On
I/O Scheduler:
sio
bfq
fiops
Some tweak and add small features
Just like flashing a normal boot.img
Go to bootloader, then
fastboot flash boot nameofboot.img
Click to expand...
Click to collapse
Also work with chainfire systemless root!
Or we can just flash it with an app like rashr if rooted
hyperay said:
Or we can just flash it with an app like rashr if rooted
Click to expand...
Click to collapse
Maybe flashify too
PineappleOwl said:
Maybe flashify too
Click to expand...
Click to collapse
I'm rashr user so I used that as example
are you will come Double tap wake up? Commintment on github page.
kaankulahli said:
are you will come Double tap wake up? Commintment on github page.
Click to expand...
Click to collapse
Dont know yet, but I tried working and researching on it for week but nothing happened.
I even check the source of Yuphoria's custom kernel and I hadn't see it working on Marshmallow.
Also I checked the Lenno Kernel from Moto E, it had DT2W but not working on us.
How's the SoT so far? I'm getting roughly 10minutes = 1% battery drain on my Cherry Mobile G1 with intersectRaven's kernel. I want to try this out if it's better in terms of battery life.
Flashing.... Thanks
Very impressive kernel dude! But here's some issues:
All 4 cores scaled at max freq
No sim after systemless root
But hey, I viberated colors and increased contrast. Screen looks amazing very big thanks!!!!
nhmanas said:
Very impressive kernel dude! But here's some issues:
All 4 cores scaled at max freq
No sim after systemless root
But hey, I viberated colors and increased contrast. Screen looks amazing very big thanks!!!!
Click to expand...
Click to collapse
Then I'll make the default value , a not-so-max freq. sir
The sim? Hmm Im pretty sure it is working. Currently, I have no problem with the sim sir
PineappleOwl said:
Then I'll make the default value , a not-so-max freq. sir
The sim? Hmm Im pretty sure it is working. Currently, I have no problem with the sim sir
Click to expand...
Click to collapse
Thank you for reply.
But I'm pretty sure sim isn't detected on your kernel. It got back when I flash stock kernel again
PS: This problem occurred after I flash systemless root. It was normal before root
Tengri biz menen
Help, i flashed the kernel but how did you improve the screen color? I downloaded KCAL color changer but I get an "Unfortunately, Color Changer has stopped." When I move 1 slider.. Does this require root?
nhmanas said:
Thank you for reply.
But I'm pretty sure sim isn't detected on your kernel. It got back when I flash stock kernel again
PS: This problem occurred after I flash systemless root. It was normal before root
Tengri biz menen
Click to expand...
Click to collapse
Does the stock rom have a conflict with it too, the systemless root?
Janjako16 said:
Help, i flashed the kernel but how did you improve the screen color? I downloaded KCAL color changer but I get an "Unfortunately, Color Changer has stopped." When I move 1 slider.. Does this require root?
Click to expand...
Click to collapse
Yes , it needs root permission sir.
PineappleOwl said:
Disclaimer:
Info:
Features:
Download Link:
PS: I am a beginner and newbie on this stuff and still learning.
Credits:
@arvinquilao , for the patience at guiding me in this stuff. @savoca, @neobuddy89, @faux123, @itsmerajit, @varunchitre15, @Sandymanu for some sources and learning
XDA:DevDB Information
Eon Kernel, Kernel for the OEM Cross Device Development
Contributors
PineappleOwl
Source Code: https://github.com/PineappleOwl/msm-seed/tree/eon6.0
Kernel Special Features: KCal Support
Version Information
Status: Alpha
Created 2016-01-20
Last Updated 2016-01-20
Click to expand...
Click to collapse
Does this kernel support FM Radio?
Is this kernel will be updated? I really like this one!
BronzieSmurf said:
Does this kernel support FM Radio?
Click to expand...
Click to collapse
Its stock based sir so the FM Radio is working fine
nhmanas said:
Is this kernel will be updated? I really like this one!
Click to expand...
Click to collapse
Yes sir. I will.
Can I flash this on CM13?
wow. finally! an intelliplug driver. thanks!
thanks
ill try this one
Introduction
NOTE:
Hello everyone, this is my first kernel for the Moto G4 Plus. I will try to maintain a stable kernel however bugs might arise since I'm not a super star kernel developer. I hope you enjoy the releases.
Important information
I will not reply to complains that do not include clear steps to reproduce the bug, a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues). Follow this guide to do this.
Features
Here are the major features of the kernel (feel free to explore Github)
Update to date with the latest Linux upstream version (3.10.108-EOL)
Westwood as the default congestion algorithm with many more to choose from
Several subsystems converted to use power efficient workqueues
Compiled with Google's arm-eabi 4.9 toolchain
Audio control from flar2
Downloads
Oreo 8.0 : https://sourceforge.net/projects/babyfish-kernel/files/athene/oreo_caf/
Nougat 7.1 : https://sourceforge.net/projects/babyfish-kernel/files/athene/nougat_caf/
Nougat 7.0 Stock :https://sourceforge.net/projects/babyfish-kernel/files/athene/stock_nougat/
Installation:
NOTE: Please make sure that you return to the stock kernel of the ROM before flashing this kernel. The kernel is unified for Moto G4 and the Plus variant so everything should be working fine.
Install the latest adb and fastboot: https://developer.android.com/studio/releases/platform-tools.html#download
Grab the boot image from the download links above
Method 1:
Using adb and fastboot
Reboot into the bootloader using either restart and hold power button and volume down or adb:
Code:
adb reboot bootloader
Flash the boot image. Run the following command in the folder with the boot image and ensure fastboot is in your PATH:
Code:
fastboot flash boot <boot_image_name>.img
Reboot and profit!
Method 2: TWRP
Keep the bootimage on your phone's storage and boot to TWRP.
Install > Select Install Image > Choose the image > Boot partition > Reboot
Changelog
28 November 2017
Oreo-CAF:
Code:
Initial Release
Introduce Tossug Baby Fish kernel
Add Sound Control
Add TCP congestion algos
Disable crc check for 30% performance improvement in I/O
Linux 3.10.108
Nougat-CAF:
Code:
Initial Release
Introduce Tossug Baby Fish kernel
Add Sound Control
Add TCP congestion algos
Disable crc check for 30% performance improvement in I/O
Linux 3.10.108
Stock N:
Code:
FAQs
1.1 Q Can you help me I have this problem?
1.1 A I will surely try to help if proper bug reporting is done as per the fashion described above.
1.2 Q: Can you add xyz feature?
1.2 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not add any useless governors or features that I don't find practical.
1.3 Q: How do I control the kernel?
1.3 A: I recommend using EX Kernel Manager or Kernel Auditor (Both need root)
1.4 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.4 A: The kernel doesn't drain any battery unless you have overclocked it, I have kept it at stock frequencies and voltages. Use an app like BetterBatteryStats to figure out what app is screwing with your phone.
Thanks to:
The various other developers for their patches (if you want a specific mention, please let me know)
All of you guys for viewing the thread
Thiago Neves @lcrd512 and Abhijeet Bohra.
Kernel source links.
8.0.0 CAF : https://github.com/tywinlannister7/android_kernel_motorola_msm8952/tree/oreo_caf
7.1 CAF : https://github.com/tywinlannister7/android_kernel_motorola_msm8952/tree/nougat_caf
7.0 Stock :
If you like my work, buy me an Appy Fizz or whatever you like
https://www.paypal.me/tywinlannister7 :good:
XDA:DevDB Information
Reviver Kernel, Kernel for the Moto G4 Plus
Contributors
tywinlannister7
Source Code: https://github.com/tywinlannister7/android_kernel_motorola_msm8952
Kernel Special Features:
Version Information
Status: Stable
Created 2017-11-28
Last Updated 2018-12-10
Screenshots
Some Screenshots
Will work on LOS, right? Sorry for asking this nooby question. I just want to be confirm before flashing. ?
tywinlannister7 said:
Some Screenshots
Click to expand...
Click to collapse
Which ROM is this?
Ayan Uchiha Choudhury said:
Which ROM is this?
Click to expand...
Click to collapse
DU 12 oreo
@tywinlannister7 Any plans on making some Device Specific ROM for Athene.? Since Invicta is out of scene now.
Thanks for the new addition in the family.
I hope this will be the favorite member of the family:laugh:
Where is the love for stock user?
thorin0815 said:
Where is the love for stock user?
Click to expand...
Click to collapse
There is a link for stock rom in the op though?
thorin0815 said:
Where is the love for stock user?
Click to expand...
Click to collapse
Stock version won't be released any sooner. I don't have the time for it right now and compilation process of stock kernel is a bit different than CAF kernels. Maybe before the second week of January.
briatide said:
There is a link for stock rom in the op though?
Click to expand...
Click to collapse
Empty as of now
ganeshkmr21 said:
@tywinlannister7 Any plans on making some Device Specific ROM for Athene.? Since Invicta is out of scene now.
Click to expand...
Click to collapse
IDK I don't have the time, we already have so many ROMs available. Creating a new ROM will be adding it to the huge list already available, from AOSP to LineageOS to Dirty Unicorns. I would rather work on optimizing what we have. Quality > Quantity.
jyoti.id said:
Will work on LOS, right? Sorry for asking this nooby question. I just want to be confirm before flashing.
Click to expand...
Click to collapse
Yes. 7.1 version for all N custom ROMs and 8.0 for all the O custom ROMs
DU 12 oreo
Blueman1990 said:
DU 12 oreo
Click to expand...
Click to collapse
about DU 12 oreo where can i get it ?
many thanks
i love new system
Does not boot on LOS15. Can anyone else confirm? Cant do logs cause my data port on my phone is broken. It sits on the boot screen like its loading but never fully boots.
Thank you bro!! finally an oreo kernel!
Where I can get DU 12?
Does this have color management?
And which kennel manager should i use with this?
Thanks
harshal2234 said:
Where I can get DU 12?
Click to expand...
Click to collapse
Its not out yet I guess
---------- Post added at 01:35 PM ---------- Previous post was at 01:33 PM ----------
Ashishliterally said:
Does this have color management?
And which kennel manager should i use with this?
Thanks
Click to expand...
Click to collapse
Bro its just a 2 page thread. At least read. That question has been answered, in the OP!
Can't I get the unofficial build?
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Same for me. On LOS 14.1, XT1643
---------- Post added at 05:17 PM ---------- Previous post was at 05:16 PM ----------
ramansehra said:
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Click to expand...
Click to collapse
I don't think so. If magisk is installed/flashed once, then no need of flashing ever again until you freshly install the rom. (AFAIK)
ramansehra said:
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Click to expand...
Click to collapse
Same happened with me I was on Invicta os 8.0
*** Disclaimer
Flash at your own risk! I take no responsibility in the event that an alarm is missed and you're late, thermonuclear war beaks out, or you spend so much time on your phone that your wife leaves you.
Introduction
Hey guys! This is the kernel myself and my good friend APOPHIS9283 have been working on for OnePlus 5/5t.
- Kernel only supports custom ROMs - final OOS version of 1.0.17 from 07/03/2018 is here in the OP, as is.
- Kernel will always be kept upstream to latest linux-stable
- We do not shy away from features around here. This kernel is LOADED! If you want something minimal, this is not for you. !
- If you have issues, we need logs! If it is an issue that is not able to be logged for some reason or another, please give detailed steps on how to replicate the issue. No logs = no support! Help us help you!
Features
- Upstreamed to latest linux-stable
- Governor options including: alucard, tripndroid, cultivation, impulse, chill, blu_active
- Overclock and underclock support. Kernel boots/defaults to stock frequencies though.
- Dynamic stune boost
- Adreno boost
- Adreno idler
- Wireguard support
- Sweep2Sleep
- LED Settings
- High brightness mode
- sRGB
- I/o schedulers including maple, deadline, bfq and tripndroid
- USB fastcharge
- Boeffla Generic Wakelock Blocker
- TCP congestion avoidance algorithms - Too many options to list!
- Backlight dimmer
- KCAL color control
- Sound control
-i/o switcher
- More I probably forgot, but you get the idea!
Installation
- If on a custom kernel, dirty flash your ROM. Reboot to recovery and flash this after booting with ROM's baked in kernel.
- If on ROM's stock kernel, just wipe kernel app data and flash this in recovery. If needed, flash no-verity after!
- Upgrading from one version to another is as simple as flashing the kernel and no verity if needed. I do recommend wiping kernel app data on each flash - we add things often!
Download
https://androidfilehost.com/?fid=5862345805528046227
Telegram group for Singularity kernel users: https://t.me/joinchat/C3FsEk7qvo5Nl3o3RXsyLw
OOS Final build 1.0.17 07/03/2018. Will not be updated or supported further but here for anyone who wishes to use it, here it is: https://androidfilehost.com/?fid=11050483647474833324
- Credits and thanks!
@nathanchance for the best base anyone could ever ask for, for assisting without expecting anything, for making upstream so simple, and for being a friend.
@osm0sis for AnyKernel2
@Lord Boeffla for his work
- All the users for giving us a reason to do this!
- Anyone I forgot, send a PM and I'll add ya.
ROM devs feel free to inline this into your ROM. Just give me a heads up and please link them here/Telegram chat.
XDA:DevDB Information
Singularity Kernel, Kernel for the OnePlus 5
Contributors
wrongway213, apophis9283, REV3NT3CH
Source Code: https://github.com/Singularity-Kernel/Singularity
Kernel Special Features: ALL THE THINGS!
Version Information
Status: Stable
Current Stable Version: 1.0.19
Stable Release Date: 2018-07-11
Created 2018-03-23
Last Updated 2018-07-11
This is the proper OP. The other 2 were duplicates. Enjoy the kernel.
Sweeet!
nice
highly appreciated your contributions
Sent from my OnePlus 5 using XDA Labs
Thanks for your work.
Flashed and boot fine with omnirom (magisk 16.1 & microg).
I like tripndroid stuff then i choose it with your kernel.(+allowed lower frequencies for cpus).
Will test that now...
:good:
Good one Tyler, I'll give it a try .
For custom rom or OOS ?
morfances said:
For custom rom or OOS ?
Click to expand...
Click to collapse
Your answer is in the first post, second sentence, in fact.
gyakusetsu1215 said:
Your answer is in the first post, second sentence, in fact.
Click to expand...
Click to collapse
Ok, as soon as I can I go to test !!!
for 7.1、8.0 or 8.1？？
daxiaamu said:
for 7.1、8.0 or 8.1？？
Click to expand...
Click to collapse
Here's a big clue, actually read the thread title.
daxiaamu said:
for 7.1、8.0 or 8.1？？
Click to expand...
Click to collapse
I think [8.1] in the title of the thread is a clue :angel:
djsubterrain said:
Here's a big clue, actually read the thread title.
Click to expand...
Click to collapse
Faster than me :victory:
Flashed with xtended rom. I do not see the settings for the sound control. I'm using kernel auditor.
Finally a kernel that is feature richh :angel: nice job bro.
morfances said:
Flashed with xtended rom. I do not see the settings for the sound control. I'm using kernel auditor.
Click to expand...
Click to collapse
I'm not sure which version of Kernel Adiutor you're using. I use EXKM myself as I didn't find KA to be able to control a lot of the options I use in big/little kernels, as well as certain settings. I swore by KA Mod back in the day, just dunno how up to the task it is for today's devices and the kernels that they run.
wrongway213 said:
I'm not sure which version of Kernel Adiutor you're using. I use EXKM myself as I didn't find KA to be able to control a lot of the options I use in big/little kernels, as well as certain settings. I swore by KA Mod back in the day, just dunno how up to the task it is for today's devices and the kernels that they run.
Click to expand...
Click to collapse
Thx,with ExKernel work fineView attachment 4455446
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
wrongway213 said:
- Kernel will never support OOS, so this is only for the custom ROM folks!
Click to expand...
Click to collapse
What custom Rom can you actually recommend for this Kernel? and which custom Rom are you using?
---------- Post added at 03:52 PM ---------- Previous post was at 03:52 PM ----------
morfances said:
Thx,with ExKernel work fine
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
Click to expand...
Click to collapse
Font?
ELoTRIX said:
What custom Rom can you actually recommend for this Kernel? and which custom Rom are you using?
I'm using it on the Xtended rom but that's the default kernel of the Aosp Extended.
---------- Post added at 03:52 PM ---------- Previous post was at 03:52 PM ----------
Font?
Click to expand...
Click to collapse
Storopia
Kernel adiutor is missing quite a few sysfs paths for features. EXKM has them though.
Can I Flash it over FSociety kernel ?
What is LightningZap! kernel?
It is a lightweight, yet heavily tweaked and optimized kernel geared towards balancing performance and battery life.
Please read this ENTIRE post before downloading and flashing LightningZap! kernel.
Disclaimer: As with all custom kernels, you flash at your own risk. Always make a backup! I nor the associates of LightningZap! kernel, Teamfahq, or the testers group cannot and will not take responsibility for YOUR actions. I cannot always control what works and doesn't work with ROMs other than my own. If there is a bug, feel free to report it with logs, but note that the problem may be due to a conflict with coding int the ROM. If said condition exists, please discuss the concern with said ROM developer. If a bug condition does exist within the kernel and there is a known fix for said bug, please don't hesistate to link me to that fix. Make sure to give credit, thanks, and maybe even a cup of coffee to your developers. If you have a feature request, please feel free to share it as well.
Features:
Based off ElementalX kernel by flar
blue_schedul governor from blue_spark kernel thanks to eng.st
Ondemand gov Optimized for better performance while maintaining battery life
FIOPS ioscheduler by default (suggest leavving it that way)
My insane readahead tweak **** In HDK-Mod kernel manager, it reports "Not in range." This is normal DO NOT adjust. My tweaks optimizes readahead per demand usage.****
LZ4 compression
O3 Optimizations
zram
lz-sysctl tweaks
Sound control (speaker, earpiece and mic)
Backlight min setting
Adjust or disable vibration
Advanced Color Control and K-Lapse
Block wakelocks
NTFS r/w, CIFS and NFS support
WireGuard support
Option to disable fsync
Pass SafetyNet
LightningZap! kernel will work on oneplus 6 and oneplus 6T on stock OOs and most custom roms. There are 2 versions, PIE and NDP.
Diferences
PIE was built for custom roms
STOCK was modified for stock OOS (Does not include commits to fix fps that custom roms need)
NDP was slightly modified for SkyDragonOs by removing wake gestures. Wake gestures are natviely written into SkyDragonOs (and maybe more roms).
I have not tested all roms to see what works and what doesn't. So, I would suggest trying PIE first. If wake gestures (like dt2w) do not work, try NDP. Feel free to report what rom and LightningZap! kernel version you are using.
Bug reporting is HIGHLY encouraged, but please accompany your reports with logs. I cannot do much to fix things without them. Pruning of the logs is deeply appreciated as well.
I feel that if you are here, you already know how to flash a custom kernel. If not, close this page and do some research about it first. This will not erase recovery or root when flashing. But, I would like to quote @eng.stk
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing LightningZap! zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash LightningZap!.
If you are already rooted or upgrading between LightningZap! versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Click to expand...
Click to collapse
Download links:
LightningZap! kernel PIE- Updated 10-07-2019
LightningZap! kernel NDP
LightningZap!-kernel-STOCK
Changelog
XDAevDB Information
LightningZap! kernel for OnePlus 6/6T
Special thanks to:
flar, eng.stk, HolyAngel Kernel Source: OnePlus6T-LZ
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 10-05-2019
ROM tracker
Here I will post what version of LightningZap! kernel works with what ROMs. As well as any noted bugs with said rom.
PIE
Most custom roms
NDP
SkyDragonOs
Stock
Stock OOS
It sounds very interesting! But a doubt that not before the SkyDragon rom was running the HolyDragon kernel? This would be the evolution of that kernel?
It sounds very promising! As soon as possible I will try it!
Thank you man!!
thomas.raines said:
Here I will post what version of LightningZap! kernel works with what ROMs. As well as any noted bugs with said rom.
PIE
Stock OOS
NDP
SkyDragonOs
Click to expand...
Click to collapse
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Ryano89 said:
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Click to expand...
Click to collapse
Isnt working for me either
fosgate24360 said:
Isnt working for me either
Click to expand...
Click to collapse
Yeah, I tried to reregister my FP but it won't let me.
Ryano89 said:
Yeah, I tried to reregister my FP but it won't let me.
Click to expand...
Click to collapse
It's not going to work on OOS as he's got the FOD hacks required for functional fingerprint on custom ROMs. Doing this breaks fingerprint on OOS, and removing them will break it on custom ROMs. The only way to accommodate both currently is with two separate kernel variants.
Great work Thomas
Riddle5 said:
It sounds very interesting! But a doubt that not before the SkyDragon rom was running the HolyDragon kernel? This would be the evolution of that kernel?
Click to expand...
Click to collapse
Completely different kernel from HolyDragons.
Ryano89 said:
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Click to expand...
Click to collapse
For governor, use whatever fits your needs the most. I recommend trying all 3 to see which on egives you the most performance and battery life.
return.of.octobot said:
It's not going to work on OOS as he's got the FOD hacks required for functional fingerprint on custom ROMs. Doing this breaks fingerprint on OOS, and removing them will break it on custom ROMs. The only way to accommodate both currently is with two separate kernel variants.
Click to expand...
Click to collapse
Yep... Accidentally merged those commits to the PIE branch. Running new build now. oops...
PIE branch updated. Fingerprint should be fixed now.
The New Update Is Buttery Smooth Bro Great Work Fp Works Better Than Stock Oos the only thing is the gaming performance has came down can experiencing shutter lags, and fps drops any fixes over that rest is just amazing bro .
Dhairya said:
The New Update Is Buttery Smooth Bro Great Work Fp Works Better Than Stock Oos the only thing is the gaming performance has came down can experiencing shutter lags, and fps drops any fixes over that rest is just amazing bro .
Click to expand...
Click to collapse
With your favorite kernel manager app, try using ondemand governor and lowering the up_threshold value adjust the sampling rate.
Using 3D benchmark app with Sling Shot Exteme setting up_threshold at 70 (default value) OpenGL ES 3.1 scored 4632 and Vulkan came in at 4272
Dropping it to 15 (lowest possible value)
OpenGL ES 3.1 scored 4857 and Vulkan came in at 4456
Setting it to 90
OpenGL ES 3.1 scored 4337 and Vulkan came in at 4068
These are overall scores and only an example. Results may very per device.
You can also try raising the sampling_rate as well. But I think the default value is best.
Be aware when adjusting these values, your perfomance vs battery life is effected.
lower up_threshuold will increase performance and decrease battery life whereas higher up_threshold decreases performance but raises battery life. Adjusting these values too high/low can cause the device to become unstable or overheat. Make your adjustments in small increments and if you notice a significant lag or your device is starting to get too hot, you can change them back and avoid complete device failure.
And by battery life, I mean the discharge rate, not the length of time until your battery takes a poop and you have to replace it or your phone.
New download link for pie branch. New branch added STOCK.
So, as pointed out by return.of.octobot , the PIE branch fp worked but became broken after reverting the commit for fp on custom roms. So, I made a new branch for OOS only and the PIE branch is for custom ROMs.
Tried flashing this stock version kernel on OOS 9.0.17 via FK manager app and got the abort message with error as unsupported device. Please see attached screenshot and let me know if there is something I need to change.
deepu458 said:
Tried flashing this stock version kernel on OOS 9.0.17 via FK manager app and got the abort message with error as unsupported device. Please see attached screenshot and let me know if there is something I need to change.
Click to expand...
Click to collapse
Flash in recovery. Since this is not a franko kernel, the franko kernel app won't work...
thomas.raines said:
Flash in recovery. Since this is not a franko kernel, the franko kernel app won't work...
Click to expand...
Click to collapse
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
James Blode said:
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
Click to expand...
Click to collapse
The thread title says it all...OOS9/ Pie.
James Blode said:
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
Click to expand...
Click to collapse
The current released and stable version is for android 9.0/pie.
Thre android 10 version is still in testing.
thomas.raines said:
The current released and stable version is for android 9.0/pie.
Thre android 10 version is still in testing.
Click to expand...
Click to collapse
Thanks for letting me know...ill wait for this great kernel...
RofikKernel_NEW
#Version 2.0
This kernel now rebased on Xiaomi Ulysse non OC source
Device
_For Redmi Note 5A UGG/UGGlite
Rom
_and rom Build/Port rom Q (Pie not tested)
Features ( use Kernel manager apps like Smartpack,ex kernel to control)
Added
*Custom CPU GOVERNOR
-blu active
*Custom CPU HOTPLUG
-alucard
-autosmp
-bricked
-intelliplug
-mako
-msmhotplug
-msmsleeper
-thunderplug
-zendecision
GPU
- Andreno idler (for help andreno-tz save gpu power when idle)
Power
-add Power suspend (for deep sleep )
Input/Output
_add FIOPS, MAPLE & ZEN I/O Scheduler
ZRAM
_Enable LZ4 algorithm support
LCD
_add lcd_notifier
_state notifier
Network
- Enable addtional TCP Congestion Algorithms : westwood , highspeed , bic, vegas
for best handling upload/download speed like westwood+
misc
inherit from ten4ugg( like doubletaptowake,storage bug fixed)
_add irda as module
Version 1
Overclock kernel based ghiffaryr v3 with bug storage fic applyed
Download
https://drive.google.com/drive/folders/1-D62j8zLvbWPrvI-FJKNkUCzR1XUbH7x?usp=sharing
Known Bug
Double Tap to wake will make phone reboot because conflict with Powersuspend
to Fixed it install SmartpackKernelmanager and goto misc
and set Powersuspend from "LCD" to "Hybrid"
How to flash
goto twrp > backup boot (recommended) > flash zip file > reboot
enjoy
Source
https://github.com/rsoft3d/RofikKernel_UGG
Thanks
Allah S.W.T
****
@zqm64 @ghiffaryr @adislice @zainarbani
features @arter97 for Adreno Idler
@faux123& @savoca
@eng.stk @frap129 @Brandon Berhent @alucard_24 @Joe Maples
@show-p1984 @flar2 @mrg666 varun.chitre15
and all @commit not mention & UGG/ugglite Telegram grup
rsoft3ddev said:
RofikKernel_NEW
#Version 2.0
This kernel now rebased on Xiaomi Ulysse non OC source
Device
_For Redmi Note 5A UGG/UGGlite
Thanks for the kernel, good to see UGG (redmi note 5A Prime) getting some love , there seems to be far less development for UGG than for UGGLITE
Kernel installs fine, but seems to have the same bug as many android 10 ROMs and kernels whereby the ROM built in camera opens with a black screen and it takes a multitude of reboots to get it to connect. Not too big a deal unless using face unlock which relies on the in built camera, otherwise just for pics and video a 3rd party camera would suffice. Thanks again for supporting UGG
Click to expand...
Click to collapse
Paul T said:
rsoft3ddev said:
RofikKernel_NEW
#Version 2.0
This kernel now rebased on Xiaomi Ulysse non OC source
Device
_For Redmi Note 5A UGG/UGGlite
Thanks for the kernel, good to see UGG (redmi note 5A Prime) getting some love , there seems to be far less development for UGG than for UGGLITE
Kernel installs fine, but seems to have the same bug as many android 10 ROMs and kernels whereby the ROM built in camera opens with a black screen and it takes a multitude of reboots to get it to connect. Not too big a deal unless using face unlock which relies on the in built camera, otherwise just for pics and video a 3rd party camera would suffice. Thanks again for supporting UGG
Click to expand...
Click to collapse
thanks for testing my kernel , but i think you using santoni port Q rom , because UGG Build Q rom not have camera bug now only goodix fingerprint bug left
Click to expand...
Click to collapse
Now Rofikkernel have Telegram channel @rofikkernelupdate thanks.
rsoft3ddev said:
Paul T said:
thanks for testing my kernel , but i think you using santoni port Q rom , because UGG Build Q rom not have camera bug now only goodix fingerprint bug left
Click to expand...
Click to collapse
I'm using this ROM ugg-files released /ten/AncientOS-CIVILIZATION-v3.7-ugg-PREHISTORIC-20200617-1503-Vanilla.zip.
If you have another recommended Android 10 ROM for UGG I'd be happy to try it.
The AncientOS ROM runs very well, but as you mention there is a fingerprint bug whereby I can register a fingerprint, but after a reboot it's gone and it has to be registered again.
Thanks again for supporting UGG
Would you also happen to know of a good recovery to use, at the moment I'm using PitchBlack recovery from 2019, but having a few errors such as can't mount data
Click to expand...
Click to collapse
reply
Paul T said:
rsoft3ddev said:
I'm using this ROM ugg-files released /ten/AncientOS-CIVILIZATION-v3.7-ugg-PREHISTORIC-20200617-1503-Vanilla.zip.
If you have another recommended Android 10 ROM for UGG I'd be happy to try it.
The AncientOS ROM runs very well, but as you mention there is a fingerprint bug whereby I can register a fingerprint, but after a reboot it's gone and it has to be registered again.
Thanks again for supporting UGG
Would you also happen to know of a good recovery to use, at the moment I'm using PitchBlack recovery from 2019, but having a few errors such as can't mount data
Click to expand...
Click to collapse
good recovery i think using fox recovery with alpha 8 version(fix mount storage)
and now los 17 mady by @zqm64 have fixed goodix fingerprint version with fpc broken can download in my telegram channel @rofikkernelupdate
like you using FPC Hardware not goodix tree using havoc os lineage or evolution os thanks
Click to expand...
Click to collapse
rsoft3ddev said:
Paul T said:
good recovery i think using fox recovery with alpha 8 version(fix mount storage)
and now los 17 mady by @zqm64 have fixed goodix fingerprint version with fpc broken can download in my telegram channel @rofikkernelupdate
like you using FPC Hardware not goodix tree using havoc os lineage or evolution os thanks
Click to expand...
Click to collapse
Thanks a lot
Would you happen to have a link for fox recovery with alpha 8 version, I can find ugglite recovery , but not UGG
Click to expand...
Click to collapse
https://t.me/CLOUDUGG/147 in here
rsoft3ddev said:
https://t.me/CLOUDUGG/147 in here
Click to expand...
Click to collapse
@rsoft3ddev, thank you very much you're a star. The orange fox recovery solved the mount data issue.
Paul T said:
rsoft3ddev said:
Thanks a lot
Would you happen to have a link for fox recovery with alpha 8 version, I can find ugglite recovery , but not UGG
Click to expand...
Click to collapse
The link to the LOS 17 file just ends in file upload not found
---------- Post added at 07:15 AM ---------- Previous post was at 07:14 AM ----------
rsoft3ddev said:
Paul T said:
good recovery i think using fox recovery with alpha 8 version(fix mount storage)
and now los 17 mady by @zqm64 have fixed goodix fingerprint version with fpc broken can download in my telegram channel @rofikkernelupdate
like you using FPC Hardware not goodix tree using havoc os lineage or evolution os thanks
Click to expand...
Click to collapse
The link to the LOS 17 file just ends in file upload not found
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Paul T said:
Paul T said:
The link to the LOS 17 file just ends in file upload not found
---------- Post added at 07:15 AM ---------- Previous post was at 07:14 AM ----------
rsoft3ddev said:
The link to the LOS 17 file just ends in file upload not found
Click to expand...
Click to collapse
sorry link to Los 17 now is not available , we build for better fixed later and and new upload link will be on again ,stay tuned to @rofikkernelupdate thanks
Click to expand...
Click to collapse
Click to expand...
Click to collapse
rsoft3ddev said:
Paul T said:
Paul T said:
The link to the LOS 17 file just ends in file upload not found
---------- Post added at 07:15 AM ---------- Previous post was at 07:14 AM ----------
sorry link to Los 17 now is not available , we build for better fixed later and and new upload link will be on again ,stay tuned to @rofikkernelupdate thanks
Click to expand...
Click to collapse
Thanks a lot for your work @rsoft3ddev, I'll keep a look out for the new build, will be good to have the fingerprint issue fixed
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Paul T said:
rsoft3ddev said:
Paul T said:
Thanks a lot for your work @rsoft3ddev, I'll keep a look out for the new build, will be good to have the fingerprint issue fixed
Click to expand...
Click to collapse
you can see your fingerprint hardware in HW Info app ,if its says FPC not goodix we have fingerprint fix for fpc for now
Click to expand...
Click to collapse
Click to expand...
Click to collapse
rsoft3ddev said:
Paul T said:
rsoft3ddev said:
you can see your fingerprint hardware in HW Info app ,if its says FPC not goodix we have fingerprint fix for fpc for now
Click to expand...
Click to collapse
According to the hardware app AIDA64 I have a FPC fingerprint scanner, can you give some more details regarding the fix for FPC
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Paul T said:
rsoft3ddev said:
Paul T said:
According to the hardware app AIDA64 I have a FPC fingerprint scanner, can you give some more details regarding the fix for FPC
Click to expand...
Click to collapse
for fpc after you install rom , copy fingerprint fix to /vendor folder (must rooted)
download fix in channel @cloudugg thanks
Click to expand...
Click to collapse
Click to expand...
Click to collapse
rsoft3ddev said:
RofikKernel_NEW
#Version 2.0
Click to expand...
Click to collapse
Have this version TTL managing options?
qazpoi12 said:
Have this version TTL managing options?
Click to expand...
Click to collapse
what TTL means ?
ROM for this kernel
Hello, I would like to ask you If you could give me some pieces of advice about ROMs, that are compatible & stable with this kernel. I'm relatively new to xda and I want to give a try to this phone.
Thank you for reply
blackbarry45 said:
Hello, I would like to ask you If you could give me some pieces of advice about ROMs, that are compatible & stable with this kernel. I'm relatively new to xda and I want to give a try to this phone.
Thank you for reply
Click to expand...
Click to collapse
Successfully flashed you ROM Havoc OS 3.7 Android 10-UGG R5APrime 060820 & gapps & fixes for MTP and bluetooth
But I've got an issue. If the device is encrypted, fingerprint is not detected by android. Could you give me some advice ?
Thank you a lot for you work! <3
blackbarry45 said:
Hello, I would like to ask you If you could give me some pieces of advice about ROMs, that are compatible & stable with this kernel. I'm relatively new to xda and I want to give a try to this phone.
Thank you for reply
Click to expand...
Click to collapse
Hi,
RessurectionRemix 5.8.5 + This Kernel + Google Micro + Magisk works