Hi, I am not really that knowledgeable so i tried using google to fix the problem but there is nothing that helped me I am desperate ...
All of a sudden my phone started rebooting itself in a loop (logo shows up screens goes black and repeat) so I tried to do these things:
-Tried to factory reset but bootloader is not accessable
-Tried to use odin and correct firmware AP - failure (custom binary frp lock)
-Tried to use all of the firmware parts BL,AP,CP,CSC -failure (secure check fail (bootloader))
Would be really grateful for some help
Related
I tried doing a factory reset of my phone from the settings and it ended on a soft brick. The screen is white when i turn it on (no galaxy note 2 logo), i cannot access recovery mode, I can however start download mode. I tried to flash the firmware using odin but odin said the pit table is missing. I tried flashing the PIT but it failed (no error message, just fail). What can I do?
I suspect its an eMMC chip failure. Very few options, if at all.
Take it to service centre.
Sorry
Hello!
My Note 2 died a few days ago and nothing seem to help it live again.
It stays stuck on the Samsung logo when I try to boot it up and accessing the recovery gives me the errors in the picture (can't mount EFS etc...).
It was working fine and it suddendly stopped working.
I can enter download mode fine and everything seems to be ok there, the product name is there, System Status: Official, Current Binary: Samsung Official.
I tried flashing a 4.4 Rom via Odin but it fails giving me a NAND write error, I also tried to use Kies firmware initialization but Kies doesn't detect my phone, it gets stuck on "establishing connection". I'm sure my cable is working fine because I tried connecting another Samsung phone, I also tried all the USB ports and a different PC too.
I read that it could be due to EMMC memory fail and that it can be fixed by replacing the motherboard only, but I also read that people with that problem also get a blank Product Name in download mode, which isn't my case.
Is it really an hardware problem? Can I try some other routes?
It won't let me posts images so here's a link to the problem I encounter in recovery mode
tapatalk.imageshack. com/v2/14/11/06/23af67e9840ce07e390c27f208a523c4.jpg
delete the blank spaces and add http:slashslash
Current situation: I'm currently stuck at the "firmware update" screen when I turn the device on.
What I think I did: I think I messed up the partition file or made a mistake trying to install twrp custom recovery
What happened: I did a factory reset when I got confused at one point and that worked as it should. When I tried it again, I was stuck in/at fast boot. However, doing a battery pull would boot the phone up. Recovery was damaged somehow?
I tried putting the phone in download mode to flash it to fix this issue. I did the method where I change COM5 to COM41, use flashtool to flash a tot and dll, pulling the usb out and reinserting when the program says "ready" but I get an error: Partition Change fa00000064 and hence that process fails.
LGPCSuite doesn't work.
Any idea how I can rectify this issue?
Thanks in advance.
Hi
I have borrowed this one with unknown condition, maybe someone played with it on JTAG to get back data....
When arrived, it was a HARD BRICK, no sign of light at all, only qualcom flash loader recognition (9008).
No vibrating, no poweron, no battery charging, , only a black screen.
I have played a lot with it, resurrected with an SD card, reflashed with ODIN....
Now the phone can poweron alone (without a boot-sd), but bootlooping in ~10sec, only samsung logo and one vibration / period.
On recovery it says "nincs parancs." (no command) and immediately reboots again into normal bootloop.
I have re-flashed the recovery as well to stock one, but nothing changed.
I have successfully get into recovery by key combination on the right second (bypassing the no command), but ONLY ONCE, and i am unable to do again.
When i was in recovery, reformatted cache/data, reboot, but no change.
Now in fastboot mode it shows read only mode.
If i am right, i can re-flash it with SD card again, but WHAT TO DO to get out from bootloop or to get a working recovery or at least TWRP?
Unfortunately the full build number is unknown.
Any suggestion?
Somebody have any ROM image with ALL of the partitions inside for 9195 hungary version?
Hello,
I bought a "bricked" Galaxy Tab S4 on ebay. The only info I got was, that it is stuck in a bootloop since the last automatic update.
The bootloop is similar to this one. The tablet starts with the Samsung logo, then nothing happens and after a while I end up in recovery mode. Further, if I restart or hardreset the tablet, the screen stays black. The only way to boot it up again is to empty the battery while it is stuck in the bootloop. Afterwards I can enter download mode by holding "vol up and down" and plugin the usb cable.
In download mode this text appears at the bottom left:
#reboot recovery cause [unknown]
API: 3
manual mode 1.0.0
(Similar to this thread.)
OEM lock is on and of course I can't change this being stuck in the bootloop, or can I?
I successfully flashed the stock rom T830XXU5CUE2 with Odin3_v3.14.4 and latest samsung drivers. Unfortunately it does not help or fix anything. (I used virtualbox, but it worked and said "PASS" at the end).
After some research I would like to try my luck with a combination rom, but I can't find a U5 version which I should use because of T830XXU5CUE2, is that correct?
Any ideas how I could proceed from here? With OEM lock I guess there is no chance to flash TWRP on it?