Develop Bugs

[RECOVERIES & ROOT] Yureka custom recoveries & Root without Changing Stock Recovery

[RECOVERIES & ROOT] Yureka custom recoveries & Root without Changing Stock Recovery
Note : This tutorial is for YU Yureka based on CM11 (KK 4.4.4) 32bit architecture
and
do it on your own risk, I will not be responsible if you brick your phone
Here is the detailed guide and collection of stock and all custom recoveries for YU Yureka and detailed guide to Root YU Yureka without changing Stock Recovery
Requirements
1. YU Yureka (obviously) with USB Data cable
2. PC / Laptop (Having Windows installed at least Windows 7 or above)
3. Drivers (Windows Automatically detect and install the required drivers)
4. ADB & Fastboot binary package that can be downloaded from XDA 15 seconds ADB Installer v1.4.2']http://forum.xda-developers.com/showthread.php?t=2588979
5. Custom Recovery (Anyone in which you are interested CWM, PhiZ, TWRP)
6. Latest SuperSU.zip file to root your phone
Warning: This process may delete all data stored in internal storage so better backup all the files stored in internal storage.
Step One
Enable USB Debugging on your device you can just follow these steps:
Go to Settings> About phone and keep taping on build number at least 7 times or till it appears "You are a developer now",
Now again go to settings>developer option (only after the previous step it will be enabled)> check/select USB debugging.
Step Two
Unlock your bootloader to flash custom recovery and root.
Here is the process
1. Download the adb & fastboot binary package and install it.
2. Put your phone into FASTBOOT mode by following anyone from below methods :
Method 1 (easiest)
-------------------
a. Power down phone
b. Plug USB cable to your PC
c. Press and hold Vol Up button and plug other end of USB to your device, soon you will see the fastboot screen.
(or without plugging USB Cable, Press and Hold Power and Vol Up buttons simultaneously, until you see the screen
"FASTBOOT MODE"
Method 2
---------
a. While your phone is Power On, plug USB Data Cable with PC and Phone (USB Debuging must be Enable)
b. Open Command Prompt on your PC (with Administartor rights) and type the following command
adb -s 0x1ebf devices
You will get results something like that :
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
3a289c2 device
*Note : If you get "authorization message" then look on your mobile screen and authorize your PC and run the command again.
c. Now note down the device no. (for e.g. in above "3a289c2") and type the following command
adb -s 3a289c2 reboot bootloader
[*Note replace the device id with your id (here 3a289c2), that you got in last command]
Now your phone must be booted into fastboot mode. A screen with "Fastboot Mode" should be appear on your phone.
3. Device drivers will get installed by windows (please wait for the driver installation to complete)
4. After driver installation is done go to the folder where you have extracted the package
5. Now open elevated DOS command prompt (terminal) on your PC and go into the same folder where you saved the recovery file
(*Note : to start command prompt directly from desired folder, while holding the Shift Key Right Click on folder and select start "open command window here")
6. Type the following command to check if the device was detected in fastboot mode
fastboot -i 0x1ebf devices
you should get output like : 2a25d00 fastboot
if you don't get similar output it means that the drivers weren't correctly installed or the device wasn't connected properly
7. If the output is similar to above then run the following command:
fastboot -i 0x1ebf oem unlock
you should get output something like :
.....
OKAY [ 0.003s]
finished. total time: 0.004s
8. Now your bootloader is now unlocked.
*Note : if you want to re-lock your bootloader again (for warranty on any other reason), again boot into fastboot mode and this time type the following command and enter
fastboot -i 0x1ebf oem lock
Step Three
Boot your phone into recovery (temporarily or permanently) and root your phone
1. Download SuperSU.zip and put it on root of your internal or external SD card
2. To load custom recovery (CWM / TWRP / PhiZ) temporarily, now type this command in terminal :
fastboot -i 0x1ebf boot CWM_6.0.5.1_recovery-yu.img
*Note 1 : if you want to flash the custom recovery permanently then us the following command
fastboot -i 0x1ebf flash CWM_6.0.5.1_recovery-yu.img
*Note 2 : if your download custom recovery is named differently (here CWM_6.0.5.1_recovery-yu.img) then while writing the above commands you need to put the name of the recovery same as as your saved file name (anyone CWM / Phiz / TWRP)
3. Done ! You loaded custom recovery temporarily, if command used with "boot" hence to root your phone, proceed to next section (step 5).
or
If you flashed recovery permanently, using command with "flash" then boot your phone into recovery. To do so, you have Two options
i) type the following command and press enter : adb -s 3a289c2 reboot recovery
or
ii) power off your phone, after then press and hold "Vol up+ Vol down + Power" buttons simultaneously to boot into custom recovery.
Now to root your phone proceed with next section (step 5).
Root your phone
5. To gain root access, flash SuperSu.zip that is stored on your internal or external SD card (in step 1)
6. Choose reboot phone and enjoy rooted phone with stock or custom recovery !
Special Note 1
I didn't tested, but came to know that root doesn't effect OTA update on Yureka.
You can get OTA updates with root but after the OTA update is flashed you will loose root access. To keep it or to avoid this please go to System Settings -> Developer Options -> UNTICK -"Update CM Recovery" (update recovery while installing system updates)
Even though if someone want to go back to Stock recovery, then download the official stock recovery (link no. 6 above) and flash it using command in fastboot mode (second command in step 2 under head "STEP THREE")
Downloads
1. 15 seconds ADB Installer v1.4.2 http://forum.xda-developers.com/showthread.php?t=2588979
2. Super SU latest v2.46 http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. CWM 6.0.5.1 https://s.basketbuild.com/devs/vishal_android_freak/yu/yureka
OR http://d-h.st/ElAe
4. PhilZTouch 6.59 based on CWM v6.0.5.1 http://www.androiddevs.net/downloads/
OR http://d-h.st/UqWK
5. TWRP 2.8.5.0 http://techerrata.com/browse/twrp2/tomato
OR https://www.androidfilehost.com/?fid=95916177934528156
OR http://d-h.st/5wDD
6. YU Yureka Official Stock Recovery http://d-h.st/tQ1k
Special Note 2
Without the vendor id, phone will not get detected in fastboot mode.
Like if you want to check fastboot type this :
fastboot -i 0x1ebf devices
therefore, always add "i -0x1ebf" after fastboot and then write your command

aabidhashmi said:
Here is is collection of all custom recoveries for YU Yureka and detailed guide to Root YU Yureka without changing Stock Recovery
Requirements
1. YU Yureka (obviously) with USB Data cable
2. PC / Laptop (Having Windows installed at least Windows 7 or above)
3. Drivers (Windows Automatically detect and install the required drivers)
4. ADB & Fastboot binary package that can be downloaded from XDA 15 seconds ADB Installer v1.4.2']http://forum.xda-developers.com/showthread.php?t=2588979
5. Custom Recovery (Anyone in which you are interested CWM, PhiZ, TWRP)
6. Latest SuperSU.zip file to root your phone
Warning: This process may delete all data stored in internal storage so better backup all the files stored in internal storage.
Step One
Enable USB Debugging on your device you can just follow these steps:
Go to Settings> About phone and keep taping on build number at least 7 times or till it appears "You are a developer now",
Now again go to settings>developer option (only after the previous step it will be enabled)> check/select USB debugging.
Step Two
Unlock your bootloader to flash custom recovery and root.
Here is the process
1. Download the adb & fastboot binary package and install it.
2. Power down phone
3. Plug USB cable to your PC
4. Press and hold Vol Up button and plug other end of USB to your device, soon you will see the fastboot screen.
(or without plugging USB Cable, Press and Hold Power and Vol Up buttons simultaneously, until you see the screen
"FASTBOOT MODE"
5. Device drivers will get installed by windows (please wait for the driver installation to complete)
6. After driver installation is done go to the folder where you have extracted the package
7. Now open elevated DOS command prompt (terminal) on your PC and go into the same folder where you saved the recovery file
* to start command prompt directly from desired folder, while holding the Shift Key Right Click on folder and select start "open command window here"
8. Type the following command to check if the device was detected in fastboot mode
fastboot -i 0x1ebf devices
you should get output like : 2a25d00 fastboot
if you don't get similar output it means that the drivers weren't correctly installed or the device wasn't connected properly
9. If the output is similar to above then run the following command:
fastboot -i 0x1ebf oem unlock
you should get output something like :
.....
OKAY [ 0.003s]
finished. total time: 0.004s
10. Now your bootloader is now unlocked.
Step Three
Root your phone without changing your stock recovery
1. Download SuperSU.zip and put it on root of your internal or external SD card
2. To load custom recovery (CWM / TWRP / PhiZ) temporarily, now type this command in terminal :
fastboot -i 0x1ebf boot recovery CWM_6.0.5.1_recovery-yu.img
*Note : if your download custom recovery is named differently (here CWM_6.0.5.1_recovery-yu.img) then while writing the above command you need to put the name of the recovery same as as your saved file name (anyone CWM / Phiz / TWRP)
Done ! You flashed custom recovery temporarily.
3. Now press and hold "Vol up+ Vol down + Power" buttons simultaneously to boot into custom recovery.
4. To gain root access flash SuperSu.zip that is stored on your internal or external SD card (in step 1)
5. Choose reboot phone and enjoy rooted phone without changing stock recovery !
Downloads
1. 15 seconds ADB Installer v1.4.2 http://forum.xda-developers.com/showthread.php?t=2588979
2. Super SU latest v2.46 http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. CWM 6.0.5.1 https://s.basketbuild.com/devs/vishal_android_freak/yu/yureka
OR http://d-h.st/ElAe
4. PhilZTouch 6.59 based on CWM v6.0.5.1 http://www.androiddevs.net/downloads/
OR http://d-h.st/UqWK
5. TWRP 2.8.5.0 http://techerrata.com/browse/twrp2/tomato
OR https://www.androidfilehost.com/?fid=95916177934528156
OR http://d-h.st/5wDD
Special Note
Without the vendor id, phone will not get detected in fastboot mode.
Like if you want to check fastboot type this :
fastboot -i 0x1ebf devices
therefore, always add "i -0x1ebf" after fastboot and then write your command
Click to expand...
Click to collapse
Few errors noted:
1. You can't say flashing recovery when you are booting it.
2. In step 3 point 3 is not valid because when your command is to boot it will automatically boot into recovery you need not use combination keys.
3. Last point vender id is wrong !!!
Few suggestions:
1. It feels like you have not tested this by yourself
2. There is already a guide for "rooting without flashing recovery". Search before posting.
Regards
aashking

aashking said:
Few errors noted:
1. You can't say flashing recovery when you are booting it.
2. In step 3 point 3 is not valid because when your command is to boot it will automatically boot into recovery you need not use combination keys.
3. Last point vender id is wrong !!!
Few suggestions:
1. It feels like you have not tested this by yourself
2. There is already a guide for "rooting without flashing recovery". Search before posting.
Regards
aashking
Click to expand...
Click to collapse
Dear aaskking
Thanks to inform. Here is the corrections
1 & 2 - Tutorial updated with "boot" and "flash" commands separately.
3 + Vendor ID is correct nothing wrong in it.
4 - I already tested all those procedures and commands. I never post anything without testing.
5 - Yes, I also seen that available guide, but that is not so much detailed and also required files links are not provided.
Anyway, thanks for your suggestions.

aabidhashmi said:
Dear aaskking
Thanks to inform. Here is the corrections
1 & 2 - Tutorial updated with "boot" and "flash" commands separately.
3 + Vendor ID is correct nothing wrong in it.
4 - I already tested all those procedures and commands. I never post anything without testing.
5 - Yes, I also seen that available guide, but that is not so much detailed and also required files links are not provided.
Anyway, thanks for your suggestions.
Click to expand...
Click to collapse
EDIT : You can get OTA updates with root..
After the update is flashed you will loose root access ..
To keep it or to avoid this please write the following step
STEP) In Developer Option UNTICK -"Update CM Recovery".
That's it.. Cheers mate wonderful thread.. @aabidhashmi @aashking

arjunsingh1000 said:
EDIT : You can get OTA updates with root..
After the update is flashed you will loose root access ..
To keep it or to avoid this please write the following step
STEP) In Developer Option UNTICK -"Update CM Recovery".
That's it.. Cheers mate wonderful thread.. @aabidhashmi @aashking
Click to expand...
Click to collapse
Thanks Arjun Singh @arjunsingh1000 for suggestion and appreciation
Post updated ...

aabidhashmi said:
Thanks Arjun Singh @arjunsingh1000 for suggestion and appreciation
Post updated ...
Click to expand...
Click to collapse
Great mate cheers just checked and tried that ota updates are available and work.. On stock recovery... Locked bootloader and with root..
Achieved this by downgrading to the very first cm11 firmware and got then rooted it and locked the bootloader then I just booted it and got the incremental update .. Downloaded and flashed .. Works perfectly.. Root not lost due to the untick in dev options..

Thanks again Arjun Singh, for confirming OTA updates are working.
I am already on Stock ROM & recovery {rooted} and tried the same procedure {locked the bootloader}, but no updates for me.
Is updates are really there, or something wrong with me ?
Sent from my AO5510 using Tapatalk

I am simply unable to get the device listed in command prompt after fastboot mode is enabled. my phone has option to boot into fastboot mode in power options. i tried that option, i tried using command to boot into fastboot. But somehow, when phone is in fastboot mode, it does not get detected by fastboot application (even though windows installs drivers successfully).
I have tried 3 different laptops. All had same problem. No idea how to solve this.

aabidhashmi said:
Thanks again Arjun Singh, for confirming OTA updates are working.
I am already on Stock ROM & recovery {rooted} and tried the same procedure {locked the bootloader}, but no updates for me.
Is updates are really there, or something wrong with me ?
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
Well I guess you are on the latest build XN0PHQ I guess? Another beta update was made but not rolled out it is um XNPH08P I know its a little late but just in case you don't know..
---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
jitendragarg said:
I am simply unable to get the device listed in command prompt after fastboot mode is enabled. my phone has option to boot into fastboot mode in power options. i tried that option, i tried using command to boot into fastboot. But somehow, when phone is in fastboot mode, it does not get detected by fastboot application (even though windows installs drivers successfully).
I have tried 3 different laptops. All had same problem. No idea how to solve this.
Click to expand...
Click to collapse
Ahahahaah... I know just the way... Do not reboot via adb ...
Switch off your phone remove your battery and put it back in do not turn it on.. But connect your USB cable and at the same time hold the power up or maybe down button .. Voila your in fastboot which will get detected .. Don't forget to use the vendor id.

arjunsingh1000 said:
Ahahahaah... I know just the way... Do not reboot via adb ...
Switch off your phone remove your battery and put it back in do not turn it on.. But connect your USB cable and at the same time hold the power up or maybe down button .. Voila your in fastboot which will get detected .. Don't forget to use the vendor id.
Click to expand...
Click to collapse
I tried this method but phone does not get detected in fastboot mode at all. I have drivers installed for all different modes I connect my phone as. No luck at all.
Also, weird thing is, I have an option to directly go to fastboot mode from the power menu.

Jitendra Garg
Your driver's are not installed
As there is no special drivers setup, so connect your PC with Internet then plug your phone and let Windows install drivers automatically.
Sent from my AO5510 using Tapatalk

Letv 1 pro US install Twrp !

hey
i need any one help me to install Twrp in Letv 1 pro US version ... Thanks

This is how I did it.
susbiction said:
hey
i need any one help me to install Twrp in Letv 1 pro US version ... Thanks
Click to expand...
Click to collapse
Files required to Root and Install Custom Recovery on Letv Le 1 Pro –
1. Download ADB and fastboot driver for windows or ADB and Fastboot for Mac and install it on your PC. This will also install your device driver.
2. Download TWRP 3.0 Recovery for Letv Le 1 Pro.
3. Download SuperSu to root Letv Le 1 Pro and copy it to your phone sd card.
------------------------------
Steps to Root and Install TWRP Recovery on Letv Le 1 Pro –
1) First, enable ‘USB debugging’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Download TWRP 3.0.0 for Letv Le 1 Pro from above and place it in the folder where ADB installed and rename it to ‘recovery.img’. Now you can Root and Install TWRP Recovery on Letv Le 1 Pro via fastboot method.
3) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.
-------------------------------------
type adb command:
adb reboot bootloader (phone will reboot)
fastboot devices ( to check that device connection)
fastboot flash recovery recovery.img (flash twrp)
fastboot reboot (right away - continuously press "volumn up button" until boot to twrp recovery. or you it won't work)
--------------------------------------------
- After reboot into twrp, install supersu.zip to root your phone.
Good luck

ThaiDude said:
Files required to Root and Install Custom Recovery on Letv Le 1 Pro –
1. Download ADB and fastboot driver for windows or ADB and Fastboot for Mac and install it on your PC. This will also install your device driver.
2. Download TWRP 3.0 Recovery for Letv Le 1 Pro.
3. Download SuperSu to root Letv Le 1 Pro and copy it to your phone sd card.
------------------------------
Steps to Root and Install TWRP Recovery on Letv Le 1 Pro –
1) First, enable ‘USB debugging’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Download TWRP 3.0.0 for Letv Le 1 Pro from above and place it in the folder where ADB installed and rename it to ‘recovery.img’. Now you can Root and Install TWRP Recovery on Letv Le 1 Pro via fastboot method.
3) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.
-------------------------------------
type adb command:
adb reboot bootloader (phone will reboot)
fastboot devices ( to check that device connection)
fastboot flash recovery recovery.img (flash twrp)
fastboot reboot (right away - continuously press "volumn up button" until boot to twrp recovery. or you it won't work)
--------------------------------------------
- After reboot into twrp, install supersu.zip to root your phone.
Good luck
Click to expand...
Click to collapse
i updated to 5.8. now i cant enter fast boot. actually i can but few seconds later automatically exit from fastboot. i guess its locked after 5.8. how can i flash twrp now?
THank you

fuat.meydan said:
i updated to 5.8. now i cant enter fast boot. actually i can but few seconds later automatically exit from fastboot. i guess its locked after 5.8. how can i flash twrp now?
THank you
Click to expand...
Click to collapse
Try this guide by DerTech99
What i do need?
1.Usb Cable
2.The Zip File
Guide:
1.Download the zip and extract it!
2.Install the minimal fastboot and adb when you dont have it! (is included)
3.Copy the Stockrecovery.img to where you have fastboot installed!
4.Turn your phone off but be fast!
5.Press "Power + Volume down" for 5 Sec until the pinguin shows up!
6.And connect fast the usb cable to the phone good!
7.Then give followed commands in "Fastboot devices"
8.When your phone do show up yes? then your ready to rock
9.Type followed command in "Fastboot flash recovery Stockrecovery.img"
10.When its done type "Fastboot reboot"
11.Disconnect your usb cable and youre are done!
12.Enjoy!
P.S After that you can flash TWRP i put in the zip the latest file!

Accidentally removed OS in OP3.

Hi all,
While trying to install custom mod i accidentally deleted my original rom as well as the custom rom from my phone. I can access twrp fast boot but while trying to install zip file its missing from phone. Any way to install any custom rom at this point?
Update : Restarted my phone ( well powered off coz of low battery) . When i charged and switched it on , twrp is not there . Instead when i go to recovery mode , the original one plus recovery mode is appearing.

gamer361 said:
Hi all,
While trying to install custom mod i accidentally deleted my original rom as well as the custom rom from my phone. I can access twrp fast boot but while trying to install zip file its missing from phone. Any way to install any custom rom at this point?
Click to expand...
Click to collapse
Sideloading is the easiest option.
Boot into TWRP, find ADB Sideload mode (I think it's under "Advanced", not sure), connect phone to PC via USB cable and flash ROM directly from PC with "adb sideload rom-name" command.
This is a very short version, if you need me to explain anything in depth just say it
Sent from my OnePlus 3 using Tapatalk

Explorer23 said:
Sideloading is the easiest option.
Boot into TWRP, find ADB Sideload mode (I think it's under "Advanced", not sure), connect phone to PC via USB cable and flash ROM directly from PC with "adb sideload rom-name" command.
This is a very short version, if you need me to explain anything in depth just say it
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
if possible please tell me step by step.

gamer361 said:
if possible please tell me step by step.
Click to expand...
Click to collapse
Sorry for late reply.
So, first things first, make sure you have working adb/fastboot on your PC (you can get it >>HERE<< if you need it; select Y for all options).
- download latest TWRP recovery >>HERE<<
- download a ROM of your choice
- in case you go for a custom ROM you'll probably also need latest firmware (CLICK), Gapps (CLICK) and possibly Magisk (CLICK)
- open command prompt in folder where you've put all downloaded files - hold Shift and right click in that folder > open command window here.
- boot phone into fastboot mode and connect it to PC
- type fastboot devices in cmd to see if the phone is properly recognized (should say something like "device #serial-number" IIRC)
- flash TWRP by typing fastboot flash recovery recovery-name.img
- reboot device into recovery mode. Fastboot generally doesn't support rebooting into recovery, but our phone makes it easy with that 5 second timeout on boot. Type fastboot reboot and as soon as it displays that warning screen press a volume button and then scroll to recovery with volumpe up/down.
You should be booted into TWRP now. Let's continue to flashing a ROM.
Assuming you're going for a custom ROM, start with firmware:
- select "Advanced" in TWRP
- select "ADB Sideload"
- swipe to start sideload
- type adb devices in cmd - it should recognize that the device is in sideload mode
- type adb sideload firmware.zip and wait for it to finish
- go back to main TWRP screen and repeat the steps to get into sideload mode
- type adb sideload rom-filename.zip
- repeat to flash Gapps and Magisk
If you chose to flash stock ROM rather than custom then you can skip firmware and Gapps and flash just the ROM (and possibly magisk, that's up to you).
Done! Now you can boot into system.

NO RPMB (how to install TWRP, a new ROM and using Magisk)

Hello, I have sent my phone to warranty and after that I received a phone with NO RPMB and after many frustrations I found (with help of many users and forums) how to workaround this..
To start:
Download boot image from here
Download twrp from the official website
Change the name to boot.img and twrp.img and put it in the platform-tools folder
Open the terminal there
Download your favourite rom
Enter fastboot mode on your phone
!!!!After this you will loose all of your data!!!!
Paste this to the terminal
fastboot oem unlock
(select yes on your phone)
fastboot flash boot boot.img
fastboot flash recovery twrp.img
fastboot format userdata
fastboot format cache
Reboot to recovery (if it doesn't enter at the first time enter download mode again and restart to recovery)
After that you have twrp and can flash every rom.. yay!!!
Wipe everything.
Copy the rom zip to your phone using MTP
Install your fancy new rom
If you want to install magisk:
Install the magisk manager.
On the app select install and select patch image file. (it will create a new boot image already patched)
After that install the new image (patched_boot.img) using twrp
Do a clean instalation of your ROM (recomended) or a Factory Reset first
Reboot to twrp
Select install
Click in install image
Select patched_boot.img
Select install to boot partition
Reboot.
Install magisk manager and do the sugested setup.
You now have magisk working
Thanks to all the users that helped me!!

I had real trouble getting twrp to work the last time I tried this a few months ago. Followed the steps here and am now on pixel experience with magisk. Thanks!

Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.

sigibian said:
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
Click to expand...
Click to collapse
My bootloader is still unlocked after following this guide
For Magisk:
-Install your custom ROM and boot it up (without root)
-Then extract the boot.img from the ROM zip file and save it on your phone storage.
-Install the Magisk manager apk
-In Magisk manager, select install Magisk> choose the patch boot image option and -Select the boot.img you previously saved.
Once it's done, reboot into twrp and flash the patched boot.img. When you reboot Magisk will be working.
I've had no issues with my bootloader, even after an ota update for pixel experience.

Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656

sigibian said:
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
Click to expand...
Click to collapse
The official twrp works for fine for me, haven't tried the 4 core version but it can't hurt to try if you need it.
Power off your phone then press and hold volume - and power to enter bootloader, then connect to your pc and follow the steps in the OP

So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache

sigibian said:
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.

baddesthad said:
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
Click to expand...
Click to collapse
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.

sigibian said:
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
Click to expand...
Click to collapse
You need to use vol- and power to go into fastboot mode then connect to the pc. As for userdata and cache, if you don't clean them when coming from stock you will have issues (your data will be encrypted if you're on stock?). As I said this guide worked for me. The op was talking about fastboot mode in the 6th option (also there is much more information in the thread I linked above)

sorry for the confusing i wanted to say fastboot mode..
i knew the thread that you are saying but most people doesn't want to search so I made a little thread only with the needed parts..
I use it myself so I have a place to remember all the steps when I need to change the rom to a new one or when I make experiments and brick my phone XD

If anyone know anything else that should be in here just say, I really want to improve the post

Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?

fhartane said:
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
Click to expand...
Click to collapse
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not

PedroM.CostaAndrade said:
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
Click to expand...
Click to collapse
Thanks for the answer. You mean that now I have twrp, I can flash custom Roms with my bootloader locked without any issue?
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk

Yes if you have TWRP you can install custom ROMs, custom Kernel's, magisk, super su, etc..
the locked bootloader only prevents you from using fastboot commands like the one needed for installing custom recovery
Now that you have TWRP you can use it for everything

Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?

Fabiojoker said:
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Click to expand...
Click to collapse
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC

Hello, thank you for your information, since I haven't done modding on phones for a long time, I didn't remember exactly the procedure with fastboot and therefore I didn't understand where I had to put the files, but in the end I did it.
Thank you
PedroM.CostaAndrade said:
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Click to expand...
Click to collapse

Why is a custom boot image needed? I don't want to root.

Oppo A83 [CPH1729] TWRP RECOVERY

⚠Warning: This is not official TWRP, use it at your own risk!!!
Data will be erased. Back up if neccessary
This device is kind of weird so to flash twrp you need these things:
1. Prepare materials​
Install driver so as to have access to preloader (Just install automatically and no need to do anything in device manager)
This software to access to preloader -> fastboot (fastboot is somehow not available via adb methods) Enter fastboot
This tool for flashing
2. Unlock bootloader (need testpoint, python, git (optional) - you can search on google)​
Use this tool - go to this section. Follow guides to unlock bootloader (remember to use testpoint not hardware buttons)
3. Enter fastboot mode​
Use latest MTK META Ultility tool
Select Reboot Fastboot Mode in BRom section
Hold volume down button. While holding connect it to your computer
*Now your phone is in fastboot mode​4. Flash​
Open platform-tools folder in Downloads folder
Shift + Right click then "open command window here"
Input these commands into cmd
fastboot flash boot drag twrp file to cmd
fastboot flash recovery drag twrp file to cmd.
fastboot reboot. Swipe to allow modification in twrp (to make sure that stockboot wont replace twrp). After that reboot to recovery to make it installed on your device permanently.
Now your recovery is ready to flash file you can push stock image file to your root folder using adb command: "adb push. Drag the stock image file. /" (Because Decryption right now doesnt work on my device yet)
Enjoy
*Sounds crazy but it is required to make sure twrp is installed correctly​*If successful, when you power on, you will get a red section on top of your device. If you want to recover to stock recovery, flash the recovery.img below.​*Also, if you want to make your own twrp, you can try recovery.img below.​
Also thanks SebaUbuntu and Mofadal El-Tayeb (مُفَضَّل) for awesome apps
​
​​
​

Here is the PBRB version for this device

Hey I'm stuck in the third step.can you please help me?

Sorry for late reply. What problems do you have?

Is this the stock boot image you provided?

SAMIUL ISLAM 0 said:
Is this the stock boot image you provided?
Click to expand...
Click to collapse
Yes it is. I took it from OTA update

Hey friends
I want to upgrade my oppo a 83 fone to a costum rom to upgrade my androide to android 8 or higher

mahmoud2503 said:
Hey friends
I want to upgrade my oppo a 83 fone to a costum rom to upgrade my androide to android 8 or higher
Click to expand...
Click to collapse
Unfortunately, I have no custom roms available for this phone (