Hey guys,
My Remdi 1S was bricked during flashing a wrong Rom,
Now screen not turning on,recovery is not opening,also fastboot is not opening.
Mi Flash detects device at COM 10 but i cannot enter into fastboot so its showing error.
Whenever i plug data cable into device,led notification light glows once(for 0.1sec) and then goes off.
In charging mode led notification light also does not glows.
Any tool for snapdragon like SP FLASH tool which works on MTK devices which was capable to unbrick Hard Bricked devices too.
did you try this
http://en.miui.com/thread-54139-1-1.html
Hi
I need really some good ideas.
My Mi Mix 2 bricked first when I was flashing the global rom via TWRP.
Installation worked out, I choose restart system in TWRP and then the screen got black and nothing happened any more.
At that time device was in EDL mode and was detected by MiFlash.
After some days I solved the "cannot receive hello package" issue and MiFlash started to flash the system (I choose China stable as first recovery).
Unfortunately MiFlash was not successful, I got the "Not enough storage is available to process this command.(0x80070008; Max buffer sector is 256)" failure message and since that the device is more or less fully dead:
no reaction at all on any hard button combinations
no EDL detected
no fastboot
The only reaction I see is the white LED light flashing when connected to a USB cable, but the PC does not recognize the device at all anymore.
Any idea how I can bring back the device to life?
Thnx
no one any idea to support?
How did you solve it man
why don't you try to use deep flashing cable to get edl mode
Hi im still can't unlock bootloader, anyway to enter in EDL mode?:crying:
2 Ways:
-Bricking your device on purpose (Not recomended, I discover this flashing a custom ROM on My Wife's phone without copying AB partitions.)
-Strpping a USB cable and joining D+ (Green Wire) and GND (Black Wire) for at lease 30 seconds until your phone forces EDL mode on itself and your PC detect the device as Qualcomm 9008
I hope this could be useful to you and to anyone.
i did a big mistake..i flashed redmi 6 pro rom to my a2 lite ..now nothing is happening...edl mode/fastboot mode is not accessing.i also show my phone to a service center. thaaaay just **** me they breaak my fingerprint reader.......help me to boot my phone i have to brought a back-part with finger print reader.please help me
absigma said:
i did a big mistake..i flashed redmi 6 pro rom to my a2 lite ..now nothing is happening...edl mode/fastboot mode is not accessing.i also show my phone to a service center. thaaaay just **** me they breaak my fingerprint reader.......help me to boot my phone i have to brought a back-part with finger print reader.please help me
Click to expand...
Click to collapse
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
In few words search in Google : test point mi a2 lite and do it
SubwayChamp said:
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
Click to expand...
Click to collapse
i cant access fastboot but it is connecting to edl mode but not getting flash.when its connect a sounds on pc but when not properly not in edl the notification light blinking.please help me.
Os_Herdz said:
In few words search in Google : test point mi a2 lite and do it
Click to expand...
Click to collapse
tnx bro but i know testpoint and i used that when my phones bootloader locked
SubwayChamp said:
Flash a proper stock rom, if you have a Mi A2 Lite phone through EDL mode this will revert a normal brick.
EDL mode is ever accesed, it might happen that device doesn´t start any kind of transfering data process through EDL, this means that your device is hard bricked in a way that motherboard can´t receive data so it´s damaged at hardware level but to prove this you have to first install the proper Qualcomm HS-USB qdloader 9008 drivers and see how is detected through device manager, it could be detected as Diagnostics 9006 with a warning symbol and then you have to update drivers, restart pc and re-start the process.
If then of bypass properly all the failures that XiaoMi flash tool can produce doesn´t work then the damaged was more serious.
If you unlocked previously (I guess you did it) then you can enter to EDL from a power off by holding both volume buttons at same time that you connect with pc -you have to first start the app and load the image- if device enters to EDL mode but the tool is not recognicing it the led light will stay on BUT if you entered correctly to EDL mode and also the tool is properly recognicing it (so the drivers were well updated) then the led light will flash intermitently.
At time to connect to pc in the mentioned steps you have not to receive any vibration just a sound from your pc.
Click to expand...
Click to collapse
now showing in mi flash as COM6 but when try to flash is says ''cannot read from COM6" help me
absigma said:
now showing in mi flash as COM6 but when try to flash is says ''cannot read from COM6" help me
Click to expand...
Click to collapse
How is detected under device manager? qualcomm-HS-USB qdloader 9008? Also what about behaviour of led light, it stays on all the time or it blinks?
Edit: Now I read your previous post, Led light has to blink, this is correctly connected, see under device manager how it is detected.
SubwayChamp said:
How is detected under device manager? qualcomm-HS-USB qdloader 9008? Also what about behaviour of led light, it stays on all the time or it blinks?
Click to expand...
Click to collapse
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
absigma said:
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
Click to expand...
Click to collapse
Ok, Behaviour changes depending on what rom you actually are, it´s mean that now you have flashed some partitions from Miui rom (led light will stay off) at least it´s being detected.
Things that you can try:
- Move the rom to the same folder where XiaoMi flash is.
- Rename the folder as short as better like "xiaomi" without quotes.
- Put your Windows in "Test Mode", restart to changes take effects.
- Switch to other version of the tool, it worked for me latest from here https://xiaomifirmware.com/downloads/miflashpro/
- Try with other rom version.
absigma said:
connected as qualcomm-HS-USB qdloader 9008 in device manager & the notification light is off when not in edl mode that time notification light blinks
Click to expand...
Click to collapse
i mconnect the battery now qualcomm-HS-USB qdloader 9008 in device manager & notification is blinking
absigma said:
i mconnect the battery now qualcomm-HS-USB qdloader 9008 in device manager & notification is blinking
Click to expand...
Click to collapse
Don't worry about led behaviour, your device will turn a bit weird cause you flashed a wrong firmware, the important here is that it's recognised by pc. What about the steps, tried?
Hi I recently try to flash a Stock Android One to my Xiaomi Mi a2 lite (Global Version of Redmi 6 pro).
I used Mi flashtool and I download a Fastboot Image file that matches my device model but my phone is bricked
the notification light is blinking when ever I push the power button. And I cannot know when my phone is charging there are no display that my phone is charging and when I press the Volume down and Power button I cannot access the Fastboot mode so I just simply attached my phone to the Computer and I shocked when I heared of a sound that my device was read by the computer but the phone is dead that time so I use the Miflash tool and It detect my phone but when I use powershell and command fastboot devices it doesnt recognized or detecting my phone.
So I decided to flash the rom to my phone because it can detect it, but Its taking too long to flash, 1500 seconds has passed but the flashing is not finish so I decided to unplug my phone but the xiaomi flash tool is still flashing so I thought that the app is corrupted so I just exit the app and open it again and do the flashing again but 2000 seconds has passed and still its the same thing I unplug the phone and the flashing still continue so I decided to stop it.
After some time I try to plug my device again but the computer dont recognized the phone anymore, the connected device sound has not triggered and the miflash tool has not recognized my phone anymore and the blinking notification light is not present too.
Please anyone help me I need this phone to attend my Online Classes please.
Similar situation here. Tried to flash Magisk. Stuck on a boot loop. Then I tried to flash Global a2 lite ROM.
Now my phone is stuck in EDL mode with 900E Drivers I see random numbers in MiFlash. When I install 9008 drivers I see the COM10 and the same random numbers on the device info in the MiFlash tool.
Taking like 30 minutes to flash and never ends. If someone has the Auto unbrick Mi a2 Lite software
please post it here so we can try to flash with this one.