Which is the best Kernel you have used on Pixel 3 Xl
Have you looked in the ROM section? There is currently only one available.
airmaxx23 said:
Have you looked in the ROM section? There is currently only one available.
Click to expand...
Click to collapse
I messed up I wanted to say Kernel
Maty360414 said:
I messed up I wanted to say Kernel
Click to expand...
Click to collapse
Gotcha. :good:
"best" is very subjective so try some and see how they work for you.
Sent from my [device_name] using XDA-Developers Legacy app
Maty360414 said:
I messed up I wanted to say Kernel
Click to expand...
Click to collapse
That's for you to decide, it's really down to preference. What's good for one person might not be for another. This question is pretty much the same as "whats the best phone", it just depends. But, I'm using the Proton kernel v7 and I'm happy with it. Battery life and performance are good.
Mine is DU
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel 3 XL using Tapatalk
Saw it dropped yesterday, and plan to flash.
Did you follow the steps in the pinned post, or modify it somewhat?
superchilpil said:
Mine is DU View attachment 4660559
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Sent from my Pixel 3 XL, #WhiteUIsMustDie, #EndDarkAppOppression
micmars said:
Saw it dropped yesterday, and plan to flash.
Did you follow the steps in the pinned post, or modify it somewhat?
Sent from my Pixel 3 XL, #WhiteUIsMustDie, #EndDarkAppOppression
Click to expand...
Click to collapse
I "followed" the instructions, but I just did it out of habit. I found the rom before I found their instructions and where it was actually posted.
A few days before it dropped I tried building it but kept running into build environment issues, but I did notice its targeted towards the December update so make sure you update first.
Sent from my Pixel 3 XL using Tapatalk
superchilpil said:
Mine is DU View attachment 4660559
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Are you talking about Dirty Unicorn ?. Where can i find it , dont see it in the Roms section .
jawonder said:
Are you talking about Dirty Unicorn ?. Where can i find it , dont see it in the Roms section .
Click to expand...
Click to collapse
It's not on XDA, gotta search around for it.
Sent from my Pixel 3 XL using Tapatalk
superchilpil said:
It's not on XDA, gotta search around for it.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
So you just factory rest and flash Rom and TWRP zip and it boot up fine and working ?.
So i flash and it keeps rebooting back to TWRP Recovery from the GU Boot Animation . Wonder if it's because i was on the December update ?. Any had success flashing from December update ?.
I'm also curious as to what makes each Kernel different. I can't really tell what each Kernel does, for example:
Freak07 said:
Graphic related features:
- KCAL to control the display
- Adreno Boost
- Enabled NAP power saving state of Adreno 630
Click to expand...
Click to collapse
This is from Kirisakura.
It sounds good, but I don't know how it would affect my phone.
Five or so Kernels are out for Pixel 3 XL. How do I know which is "best for me?"
So I ask, what do you look for in a Kernel / How should I choose a Kernel?
ZzEzZ said:
I'm also curious as to what makes each Kernel different. I can't really tell what each Kernel does, for example:
This is from Kirisakura.
It sounds good, but I don't know how it would affect my phone.
Five or so Kernels are out for Pixel 3 XL. How do I know which is "best for me?"
So I ask, what do you look for in a Kernel / How should I choose a Kernel?
Click to expand...
Click to collapse
IMHO, unless you want to mess around with clock speeds and stuff, stock kernel is just fine.
Sent from my [device_name] using XDA-Developers Legacy app
jawonder said:
So you just factory rest and flash Rom and TWRP zip and it boot up fine and working ?.
Click to expand...
Click to collapse
jawonder said:
So i flash and it keeps rebooting back to TWRP Recovery from the GU Boot Animation . Wonder if it's because i was on the December update ?. Any had success flashing from December update ?.
Click to expand...
Click to collapse
I made sure to update to the December update. Well at least the vendor, radio, and BL. The build is targeted towards the December update.
I factory reset, flashed the rom followed by twrp, booted up and set everything up then after it was done then I flashed magisk.
So what I would say is make sure everything is up to date (BL, vendor, and Radio) then make sure that your zip isn't corrupt
If all of the above is good then f reset in twrp, then wipe system. Flash the rom and twrp. Profit?
Sent from my Pixel 3 XL using Tapatalk
superchilpil said:
I made sure to update to the December update. Well at least the vendor, radio, and BL. The build is targeted towards the December update.
I factory reset, flashed the rom followed by twrp, booted up and set everything up then after it was done then I flashed magisk.
So what I would say is make sure everything is up to date (BL, vendor, and Radio) then make sure that your zip isn't corrupt
If all of the above is good then f reset in twrp, then wipe system. Flash the rom and twrp. Profit?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I was on the latest December update . I Factory Reset Flashed the Rom them flashed TWRP 3.2.3.2 zip. I rebooted and got to the DU boot Animation froze then reboot back to TWRP . What version of TWRP did you use ?. Also i downloaded the DU zip many times and checked the MD5 with different MD5 checker and the MD5 doesn’t match, i get the same MD5 with all the app that i used and it doesn’t match the one generated from the DU download area .
Also do have the December update Bootloader and Radio on both A bad B slots ?.
Yeah it has to be on both slots. Whenever you flash firmware it should to be to both slots always.
Sent from my Pixel 3 XL using Tapatalk
superchilpil said:
Yeah it has to be on both slots. Whenever you flash firmware it should to be to both slots always.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Is there a command that can be used to ensure firmware is flashed to both slots ?.
Edit: Got DU working. I was flashing TWRP 3.2.2.1 zip over 3.2.3.2 image don't know if made any difference but the only thing i changed was to flash TWRP 3.2.3.2 zip after flashing DU and it booted fine
I chose DU because I didn't need to go back to a month old operating system to get it to install.
Booted to TWRP and did a factory reset. Installed DU zip and rebooted. Set up user and let it settle.
Rebooted to TWRP and installed Kirisakura kernel 1.8.5, and Magisk 18.0.
Rebooted to system and all is well.
Nice ROM, and the kernel is absolutely the best.
JMO!
Related
Hi all.
I have a nice OP3. And I'm looking for an nice stable 7 or 7.1 ROM.
I RUN now Open Beta 8.
The problem is that in 2 or 3 weeks the ROM begins to be unstable, slow and some issues.
So guys and girls, what do you like/prefer for an nice stable rom?
Thank you all. <3
The ROM hasn't been out two or three weeks - how can you claim it will become unstable?
I'm using it and it works great. I don't want to deal with the low quality camera on custom ROMs, and even if I did CM based ROMs have echo bugs in calls which is unacceptable for a phone
2x4 said:
The ROM hasn't been out two or three weeks - how can you claim it will become unstable?
I'm using it and it works great. I don't want to deal with the low quality camera on custom ROMs, and even if I did CM based ROMs have echo bugs in calls which is unacceptable for a phone
Click to expand...
Click to collapse
No I mean other CUSTOM ROM's.
Not the original/beta ROM. That will be ofcourse good.
Just do a backup of when you first install it. That way it is easy to reinstall and get the speed back that you claim to be losing. Also reformat your data and cache to f2fs in twrp. This will also boost speed, but you need to do this prior to installing your ROM. Just a couple of ideas to keep your device fresh and fast. I do this with my ROMs and beta 8 landed me a 148,XXX antutu score, the "black mix" RR rom scored a 151,XXX on antutu after substratum theme and loading various apps. I have gotten as high as 156,XXX with some builds, which puts it closer to scores that are put up by phones with the SD821 (low 160's). That sort of a difference will not even be noticeable in everyday use. So I highly recommend switching your file system if you are not already using f2fs.
2x4 said:
The ROM hasn't been out two or three weeks - how can you claim it will become unstable?
I'm using it and it works great. I don't want to deal with the low quality camera on custom ROMs, and even if I did CM based ROMs have echo bugs in calls which is unacceptable for a phone
Click to expand...
Click to collapse
jim262 said:
Just do a backup of when you first install it. That way it is easy to reinstall and get the speed back that you claim to be losing. Also reformat your data and cache to f2fs in twrp. This will also boost speed, but you need to do this prior to installing your ROM. Just a couple of ideas to keep your device fresh and fast. I do this with my ROMs and beta 8 landed me a 148,XXX antutu score, the "black mix" RR rom scored a 151,XXX on antutu after substratum theme and loading various apps. I have gotten as high as 156,XXX with some builds, which puts it closer to scores that are put up by phones with the SD821 (low 160's). That sort of a difference will not even be noticeable in everyday use. So I highly recommend switching your file system if you are not already using f2fs.
Click to expand...
Click to collapse
Thanks man, but is it safe?
And battery friendly then?
Every Rom will get slower after you install a bunch of apps and use it over time unstable or stable doesn't matter. I don't understand your logic.
YourTheBest said:
Thanks man, but is it safe?
And battery friendly then?
Click to expand...
Click to collapse
It is totally safe and it has nothing to do with your battery. It is merely a different file system.
I've heard that formatting to f2fs on 7.+ makes it problematic to flash root. Is that true?
No. Root and file system are two different things. You can have root on any file system.
jim262 said:
No. Root and file system are two different things. You can have root on any file system.
Click to expand...
Click to collapse
Thats not true. F2fs on data breaks systemless mode. You need forced systemmode supersu.
Everything is interdependent, but I am running 2.78 SR5 on a 7.1 ROM right now.
nadejo said:
Thats not true. F2fs on data breaks systemless mode. You need forced systemmode supersu.
Click to expand...
Click to collapse
Please, do not spread false information.
System-less SU works just fine with f2fs, also encrypted.
morphvale said:
Please, do not spread false information.
System-less SU works just fine with f2fs, also encrypted.
Click to expand...
Click to collapse
Sry cant confirm.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A3003 using Tapatalk
YourTheBest said:
Hi all.
I have a nice OP3. And I'm looking for an nice stable 7 or 7.1 ROM.
I RUN now Open Beta 8.
The problem is that in 2 or 3 weeks the ROM begins to be unstable, slow and some issues.
So guys and girls, what do you like/prefer for an nice stable rom?
Thank you all. <3
Click to expand...
Click to collapse
latest resurrection remix is the best rom i have used yet.
bombaglad said:
latest resurrection remix is the best rom i have used yet.
Click to expand...
Click to collapse
i second this! my daily driver since one week and im excited of it
morphvale said:
Please, do not spread false information.
System-less SU works just fine with f2fs, also encrypted.
Click to expand...
Click to collapse
Please. You are wrong. The other guy is correct.
Are you kidding me? I've also attached prints where you can clearly see system-less running on f2fs.
Sent from my ONEPLUS A3003 using Tapatalk
morphvale said:
Are you kidding me? I've also attached prints where you can clearly see system-less running on f2fs.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Same here. No issue with root on f2fs.
Before flashing rom i formatted all partitions as f2fs, but after rom installation system and cache is on ext4 again. I saw somewhere that this is how it should be. but can you please confirm it?
krumbman0wnz said:
I've heard that formatting to f2fs on 7.+ makes it problematic to flash root. Is that true?
Click to expand...
Click to collapse
jim262 said:
No. Root and file system are two different things. You can have root on any file system.
Click to expand...
Click to collapse
nadejo said:
Thats not true. F2fs on data breaks systemless mode. You need forced systemmode supersu.
Click to expand...
Click to collapse
MrPhilo said:
Please. You are wrong. The other guy is correct.
Click to expand...
Click to collapse
Well on the new beta8 I'm unable to use systemless root it breaks the radio and cant detect any sim (didn't try forced systemmode).. but can't be sure if it's because of f2fs or not..
I'll try forced systemmode and see...
I want to inform people that there is another CM-13.0 available in Team Superluminal web site.
Thanks and enjoy!
Do I have to create a login to download?
Tikerz said:
Do I have to create a login to download?
Click to expand...
Click to collapse
It's worth it trust me.
ekkilm said:
It's worth it trust me.
Click to expand...
Click to collapse
Thanks. I'm about to flash it.
Update: Not flashing for me. I'm stuck at "Patching system...."
Has anyone done a dirty flash over the other CM build successfully? I'm about to give it a try.
Edit: Just flashed over the old build with no issues. Thanks!! I'll provide a screenshot once it finishes preparing the apps.
NOTE: Remember install gapps in same time with the rom (if you need/like)
NOTE2: Remember factory reset and format system partition when coming from any other ROM than previous version of TS CM13.0
tim08 said:
Has anyone done a dirty flash over the other CM build successfully? I'm about to give it a try.
Edit: Just flashed over the old build with no issues. Thanks!! I'll provide a screenshot once it finishes preparing the apps.
Click to expand...
Click to collapse
Are you using x720 or x727?
Sent from my LEX727 using Tapatalk
Had an issue with the PIN being overwritten I believe... just followed this guide and all is well again.
Edit: I'm using LEX727, about to edit build.prop again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tim08 said:
Had an issue with the PIN being overwritten I believe... just followed this guide and all is well again.
Edit: I'm using LEX727, about to edit build.prop again
Click to expand...
Click to collapse
Weird, it's not flashing for me. I'm stuck on patching system. I'm coming from stock.
I also noticed the ZIP contains firmware images. Not knowing where they're from, I'm a little worried if something goes wrong or is in compatible I can't get the x727 firmware files back.
tim08 said:
Had an issue with the PIN being overwritten I believe... just followed this guide and all is well again.
Edit: I'm using LEX727, about to edit build.prop again
Click to expand...
Click to collapse
I have seen conflicting info on this can you give me the exact edits u did to the build prop if it works please. Since you are on the 727 don't you need to flash the band 12 also?
Please read description and instructions before any steps.
It's for LEX720 and we've added LEX720 FW files in the rom also.
How to install:
NOTE: You have to have custom recovery installed, before any steps.
0) If you want to be safe: Backup apps/sms/etc with some app (e..g Titanium)
1) boot into marshmallow compatible TWRP (or similar) recovery
2) Backup -> swipe to backup
When coming from ANY other ROM than TS CM13:
2.1) Wipe -> Advanced Wipe -> Select system, data, cache and dalvik cache partition (Swipe to wipe)
3) install cm-13.0-xxxxxxx-UNOFFICIAL-le_zl1.zip (select from storage or via adb sideload) and must install gapps same time with the rom if you make clean install (if you need/like)
4) reboot
5) profit
NOTE: All changes in system partition are lost when you update ROM.
Click to expand...
Click to collapse
Followed the directions here and everything going ok for now. Restoring my apps via titanium backup.
I don't think any modem is flashed at least I haven't had any issues needing to flash the modem for band 12.
I edited "ro.product.model=LEX720" to "ro.product.model=x727" and "persist.radio.multisim.config=dsds" to "persist.radio.multisim.config=NA" but it doesn't seem to want to find the SIM card now...
Nevermind, I guess it's not intended for the X727 US version so I'll be flashing back to the old CM
the differences between cm-13.0-xxxxxxx-UNOFFICIAL-le_zl1.zip and CM13.0 for LEX720 -Team Superluminal? witch version is better?
tim08 said:
I don't think any modem is flashed at least I haven't had any issues needing to flash the modem for band 12.
I edited "ro.product.model=LEX720" to "ro.product.model=x727" and "persist.radio.multisim.config=dsds" to "persist.radio.multisim.config=NA" but it doesn't seem to want to find the SIM card now...
Nevermind, I guess it's not intended for the X727 US version so I'll be flashing back to the old CM
Click to expand...
Click to collapse
Arent they the same except for build prop and band 12? I can't make heads or tails. I thought otherwise tehy are the same.
zmanfarlee said:
Arent they the same except for build prop and band 12? I can't make heads or tails. I thought otherwise tehy are the same.
Click to expand...
Click to collapse
I thought so too but when I edited build.prop for one sim it failed to find the card and said one wasn't inserted. So I'm just gonna flash the old CM build which I know works with one sim, I could keep it on the setting for two but then it takes forever to lock on and seems to lose service.
tim08 said:
I thought so too but when I edited build.prop for one sim it failed to find the card and said one wasn't inserted. So I'm just gonna flash the old CM build which I know works with one sim, I could keep it on the setting for two but then it takes forever to lock on and seems to lose service.
Click to expand...
Click to collapse
I think the x720 firmware files has something to do with it. Hopefully when you restore the firmware files are still there from x727.
EDIT: Just thought of something, maybe flash the US modem along with doing the build.prop edit will work for this ROM on x727?
tim08 said:
I thought so too but when I edited build.prop for one sim it failed to find the card and said one wasn't inserted. So I'm just gonna flash the old CM build which I know works with one sim, I could keep it on the setting for two but then it takes forever to lock on and seems to lose service.
Click to expand...
Click to collapse
Weird when I boot it flashes a signal then sim then signal within 2 seconds and I am locked in. Weird. I did not expect this x720 vs x727 to be such a huge issue.
I installed it and will try it on lex720 for some days. The chinese one has a realy bad battery. Hope this will be better
I have it running on a US 727, it works fine, doesn't have any of the chinese junk off the other app. I don't know how to check band 12, and I'm not sure it matters in my area. Also the themer works.
[SOLVED] How to apply OTA update with TWRP & Magisk root? Apply latest Factory image
I have Xiaomi Mi Mix 2 with TWRP & latest Magisk 14.0 and Magisk Manager 5.4.3. Running MIUI 9.1 Global Stable 9.1.1.0. It is working great! I was just notified of an OTA update 9.1.2.0 from Xiaomi. How do I apply it without losing data & root? Thanks!
Edit - [SOLVED] see this post https://forum.xda-developers.com/showpost.php?p=74706923&postcount=8
Same question here, I am on Global beta 7.11.6 and want to Update to 7.12.1 but Update doesnt work because twrp is installed as recovery?
Normally for an OTA to be installed it needs the stock recovery otherwise it will fail during checks. So you would have to flash stock recovery and then you could take or flash OTA then you would have to re-root and flash TWRP
Sent from my [device_name] using XDA-Developers Legacy app
jr313 said:
Normally for an OTA to be installed it needs the stock recovery otherwise it will fail during checks. So you would have to flash stock recovery and then you could take or flash OTA then you would have to re-root and flash TWRP
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
OK. Thanks. So best would be to wait until factory image of 9.1.2.0 is available and flash it over the top of current via TWRP?
I'm remembering a tool from when I had Nexus 5 called FlashFire. Wonder if that would work?
colorado_al said:
OK. Thanks. So best would be to wait until factory image of 9.1.2.0 is available and flash it over the top of current via TWRP?
I'm remembering a tool from when I had Nexus 5 called FlashFire. Wonder if that would work?
Click to expand...
Click to collapse
Yeah you could do that or wait for one of the developer to update their factory rom to flash over top. I just checked out the flash fire app and it gave a warning about Xiaomi devices not tested to use caution if you want to try
Sent from my [device_name] using XDA-Developers Legacy app
jr313 said:
Yeah you could do that or wait for one of the developer to update their factory rom to flash over top. I just checked out the flash fire app and it gave a warning about Xiaomi devices not tested to use caution if you want to try
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Looks like global ROM is available here:
http://en.miui.com/download-334.html
Version: V9.1.2.0.NDEMIEI (MIUI9)
Has anyone a stock recovery for me please?
OK. I found this and it worked great!
https://dhananjaytech.com/flash-sto...evice-using-twrp-recovery-or-fastboot-method/
Thanks to Chinmay Dhumal for the tutorial which you can see here:
https://youtu.be/oUUzxYHV_ac
DL the latest stock ROM from here:
http://en.miui.com/download-334.html
DL lazyflasher-no-verity-opt-encrypt.zip by clicking on the download arrow on the top right here:
https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view
DL Magisk from here:
http://magiskmanager.com/Magisk/Magisk-v14.0.zip
Copy all 3 to your storage on your phone.
Boot into TWRP by powering off your phone and then holding volume up and power until MI splashscreen appears
Then navigate to Wipe and click Advanced wipe.
Check Cache and Davlik/ART Cache and wipe them
Then back out to the main TWRP screen and choose Install
Then flash the new ROM that you downloaded from Xiaomi MIUI page
Then flash Magisk (Or SuperSU if that is what you use)
Then flash lazyflasher-no-verity-opt-encrypt.zip
Then reboot to system
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied.
Sent from my Mi MIX 2 using Tapatalk 2
capcase said:
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied
Click to expand...
Click to collapse
Did you keep root? And now your device says 9.1.2.0?
9.1.2, it seems I lost root
Sent from my Mi MIX 2 using Tapatalk 2
capcase said:
9.1.2, it seems I lost root
Sent from my Mi MIX 2 using Tapatalk 2
Click to expand...
Click to collapse
Very interesting.
I'm surprised that the OTA installed on a rooted device with TWRP recovery. That will usually not work.
Thanks!
capcase said:
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied.
Sent from my Mi MIX 2 using Tapatalk 2
Click to expand...
Click to collapse
and what is the password? is the Xiaomi account one?
brainvision said:
and what is the password? is the Xiaomi account one?
Click to expand...
Click to collapse
Whatever you use to login to your phone
colorado_al said:
Whatever you use to login to your phone
Click to expand...
Click to collapse
Mmm.. so the one of the Xiaomi account?
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
brainvision said:
Mmm.. so the one of the Xiaomi account?
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
Click to expand...
Click to collapse
No, the password used to unlock your phone after one normal boot, so of course not one schema.
If you have Schema, you must change Schema system by password system...
El Philou said:
No, the password used to unlock your phone after one normal boot, so of course not one schema.
If you have Schema, you must change Schema system by password system...
Click to expand...
Click to collapse
Thanks for your reply. Now I know it was obvious but if you consider that this is my first Xiaomi device you'll understand my question.
Would you please link me something relevant about how to start modding in mix 2 that is not in OP right now? It would really help me.. I know it's possible to find many guides by googling but you know, something suggested by an expert user is always better than the first one found online
Thanks a lot! [emoji106]
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
colorado_al said:
OK. I found this and it worked great!
https://dhananjaytech.com/flash-sto...evice-using-twrp-recovery-or-fastboot-method/
Thanks to Chinmay Dhumal for the tutorial which you can see here:
https://youtu.be/oUUzxYHV_ac
DL the latest stock ROM from here:
http://en.miui.com/download-334.html
DL lazyflasher-no-verity-opt-encrypt.zip by clicking on the download arrow on the top right here:
https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view
DL Magisk from here:
http://******************/Magisk/Magisk-v14.0.zip
Copy all 3 to your storage on your phone.
Boot into TWRP by powering off your phone and then holding volume up and power until MI splashscreen appears
Then navigate to Wipe and click Advanced wipe.
Check Cache and Davlik/ART Cache and wipe them
Then back out to the main TWRP screen and choose Install
Then flash the new ROM that you downloaded from Xiaomi MIUI page
Then flash Magisk (Or SuperSU if that is what you use)
Then flash lazyflasher-no-verity-opt-encrypt.zip
Then reboot to system
Click to expand...
Click to collapse
New Magisk is here for latest ver:
magiskmanager(dot)com
HI,
I have a redmi5+ rooted. I use luckypatcher (i applied some patchs to some apps) and i have installed once BusyBox (didn't do anything in special).
I want to know if it is secure to flash the full update?
PS: how do I confirm if the system files and vendor are ok to proceed?
Thanks
Thanks for this guide.
Since I promised ill patch ramdisk of P20 (versions) ill try live up to it my promise. Please do note that this is untested since currently I don't own nor any device of P20 line
Installation instructions.
Download the zip for your device and unpack it to your computer.
Boot your phone into bootloader (volume down and plug in cable)
Type: fastboot flash ramdisk yourpatchedboot.img
Reboot!? Proofit!?
Edit: if you have issues with Magisk and safetynet read
secXces_debaki said:
Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.
Click to expand...
Click to collapse
Downloads:
EML-L29
https://mega.nz/#!gPBCCCyI!HOCiXH2Zrl84l01PT99U_ElMMuC_JukjgS47DZGkqPQ
Eml-l09?
https://mega.nz/#!dOoAnaIS!MMw2QFp_JNegVG0g95RrVm_AmqDpvtO-wGQX1LLkmYs
EML-TL00/AL00 8.1.0.106
https://mega.nz/#!hKQXgCKT!C2tObO92jyuYBvrVrPeOIfWHSkpVeUCtIgjfuhENaCo
EML-L29 working
EML-L09 untested
EML-AL00/TL-00 untested
Everyone should be pre rooted though
Sent from my DUK-L09 using Tapatalk
will test EML-TL00/AL00 8.1.0.106 tomorrow,thks~!
Thanks!
I'm going to test it on the p20.
Ladies and gentlemen soon a twrp will be hopefully released for P20 pro (tested) and should hopefully work on P20 which will have decryption support.
Don't believe me?
I'm talking to the developer who built it so stay tuned you'll eventually see it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my DUK-L09 using Tapatalk
quick question, does the bootloader have to be unlocked to flash magisk?
Samueldanny said:
quick question, does the bootloader have to be unlocked to flash magisk?
Click to expand...
Click to collapse
Yes
LastStandingDroid said:
Since I promised ill patch ramdisk of P20 (versions) ill try live up to it my promise. Please do note that this is untested since currently I don't own nor any device of P20 line
Installation instructions.
Download the zip for your device and unpack it to your computer.
Boot your phone into bootloader (volume down and plug in cable)
Type: fastboot flash ramdisk yourpatchedboot.img
Reboot!? Proofit!?
Click to expand...
Click to collapse
Hello!
First and foremost, massive thank you for your work.
Second: it, unfortunately, doesn't work for me on my EML-L29TWRP (or I just messed up something). I followed the flash trough Fastboot command, installed magisk manager app but there is no supersu available like on your screenshots I have unlocked my bootloader properly ( get all warnings how my phone cant be trusted).
I just need superSU to remove retail demo app but if necessary I'm willing to debug software.
Also, I have screen captures to show my issue but because I am a new user I cant share them.
LastStandingDroid said:
Ladies and gentlemen soon a twrp will be hopefully released for P20 pro (tested) and should hopefully work on P20 which will have decryption support.
Don't believe me?
I'm talking to the developer who built it so stay tuned you'll eventually see it
View attachment 4476320View attachment 4476321
Click to expand...
Click to collapse
This is a good news. We all wait for this famous twrp, so if it is almost operational it's really an excellent news.
Foglito said:
Hello!
First and foremost, massive thank you for your work.
Second: it, unfortunately, doesn't work for me on my EML-L29TWRP (or I just messed up something). I followed the flash trough Fastboot command, installed magisk manager app but there is no supersu available like on your screenshots I have unlocked my bootloader properly ( get all warnings how my phone cant be trusted).
I just need superSU to remove retail demo app but if necessary I'm willing to debug software.
Also, I have screen captures to show my issue but because I am a new user I cant share them.
Click to expand...
Click to collapse
Which file did you flash
If anyone needs help or has questions
You can join
https://t.me/joinchat/EzNJoUnSYrj_M7CnVvzNKg
I'll be more available at telegram than tapatalk/xda
Sent from my DUK-L09 using Tapatalk
fanfan7110 said:
This is a good news. We all wait for this famous twrp, so if it is almost operational it's really an excellent news.
Click to expand...
Click to collapse
Only downside for now is you can only decrypt if you have no password set. Though
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Only downside for now is you can only decrypt if you have no password set. Though
Click to expand...
Click to collapse
You might want to tell the builder to check the commit from TWRP for Pixel 2. February security patch causing that decryption problem when user have password set. But it has been fixed since march by DeesTroy.
Saftynet is being tripped.
I have L29
otonieru said:
You might want to tell the builder to check the commit from TWRP for Pixel 2. February security patch causing that decryption problem when user have password set. But it has been fixed since march by DeesTroy.
Click to expand...
Click to collapse
I've forwarded this thanks for the info [emoji16]
Sent from my DUK-L09 using Tapatalk
Samueldanny said:
Saftynet is being tripped.
I have L29
Click to expand...
Click to collapse
Interesting. This could be though due to demo unit possibly. Since it most likely isn't going to pass safetynet I can't tell
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Interesting. This could be though due to demo unit possibly. Since it most likely isn't going to pass safetynet I can't tell
Click to expand...
Click to collapse
I'm also unable to install modules.
Samueldanny said:
I'm also unable to install modules.
Click to expand...
Click to collapse
Please do join https://t.me/joinchat/EzNJoUnSYrj_M7CnVvzNKg for better assistance.
Tapatalk gives me tons of updates so can't keep track
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Only downside for now is you can only decrypt if you have no password set. Though
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
On a other side, it's not a big problem. It's simple to remove security password, install twrp and root, and then, put again the security with password.
That was what we had to do with the OnePlus 5T at the beginning of the first versions of TWRP.
we hope that a functional and downloadable version will be available soon
On the other hand if huawei could allow to download a ROM Stock, it would still be safer in case of bad flashing or brick phone. But can we hope that soon, not sure.
Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.
secXces_debaki said:
Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.
Click to expand...
Click to collapse
Oh yah didn't knew that was needed until a hour ago or two. Have had little time busy spending time with family.
Sent from my DUK-L09 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Unofficial crDroid v5.7*
Welcome to the New beginning !
This topic will be dedicated to our bring up of PIE for Pixel 2 XL !
Sincere thanks to LineageOS team for the rom base sources.
These are builds. They aim to serve base for feature addition. If you face any force close, you need to provide log to get it resolved. Make sure to keep eye on this post and latest discussions in this topic to help yourself.
Features
Click for feature list
Downloads:
ROM
Androidfilehost :
Release Builds
MEGA Upload :
Download
* Pixelgapps on Rom *
Recovery: TWRP Recovery
Root : Magisk
Recommended Clean Flash:
1. Go to Recovery "Wipe"
2. Factory Reset
3. Advanced Wipe
4. Dalvik/Art Cache, System, Data and Cache ONLY!! DO NOT WIPE INTERNAL STORAGE
5. Swipe to Wipe
6. Flash Rom and TWRP
7. Reboot to Recovery and flash Magisk if you want root access
8. Enjoy!
Source Kernel : https://github.com/BlackDeaths/wahoo
Devices : https://github.com/BlackDeaths/android_device_google_wahoo
https://github.com/BlackDeaths/android_device_google_taimen
Vendor : https://github.com/TheMuppets/proprietary_vendor_google
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Current Version: 5.7
Created 2018-12-03
Last Updated 2019-08-11
Reserved
Have you got any screenshots? Used to use this on my OnePlus 3T
adam20115 said:
Have you got any screenshots? Used to use this on my OnePlus 3T
Click to expand...
Click to collapse
look best there
https://crdroid.net/
incl. Pixelgapps
later like live pictures but is the same as there !!
make new Build !!!
Next build up and androidfilehost New build!!!!
Later New build Server error....
You should mention for those who rely on Google Fi, choose aroma GApps.
Sent from my Pixel 2 XL using XDA Labs
joeo10 said:
You should mention for those who rely on Google Fi, choose aroma GApps.
Sent from my Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
Pixelgapps on Rom
Blackjubel said:
Pixelgapps on Rom
Click to expand...
Click to collapse
Thanks for the confirmation!
Sent from my Pixel 2 XL using XDA Labs
Updates now also via MEGA Upload
https://mega.nz/#!Id4wXCgZ!F0ek5clPoZEtM2-x9bPQEwoxDjkkH9EBOfXX-6wEW_k
Tell me the Russian translation is added in the settings?
I have this problem with the percentage of the battery is not giving me what has to be in the status bar
I tried clean flashing this but I am unable to boot it. When I try to reboot twrp says no OS installed.
EDIT: So it flashed properly but there was no custom boot logo as I expected. Had an Internal Error at startup too but I think that may just be a one time on boot thing.
[email protected] said:
Tell me the Russian translation is added in the settings?
Click to expand...
Click to collapse
Now it has arrived.
Not So Pro said:
I tried clean flashing this but I am unable to boot it. When I try to reboot twrp says no OS installed.
EDIT: So it flashed properly but there was no custom boot logo as I expected. Had an Internal Error at startup too but I think that may just be a one time on boot thing.
Click to expand...
Click to collapse
flash the rom 2 times the error does not come anymore.
I've flashed several times.. the internal problem popup won't go away... Aside from that? Things are running fairly well!
jbarcus81 said:
I've flashed several times.. the internal problem popup won't go away... Aside from that? Things are running fairly well!
Click to expand...
Click to collapse
have the same problem too.
dazehaze said:
have the same problem too.
Click to expand...
Click to collapse
The only time ive ever gotten that message i was running the wrong vendor image with the rom i was using.hope maybe this helps.
If one, please, could make off a Screenshot?
gillim74 said:
The only time ive ever gotten that message i was running the wrong vendor image with the rom i was using.hope maybe this helps.
Click to expand...
Click to collapse
I did try the right vendor but it's not gone.
I'd grab a shot for you but I've moved back to stock until I figure out what I want to do.. Also, and I'm not sure this matters, but whatever is going on, SafetyNet failed the ctsProfile but passed on basicIntegrity.. Not sure if that matters in relation to what's going on with the error message but SafetyNet passes on all roms I've tried, stock and custom.
First off this is a GREAT rom and my daily driver. Secondly I am receiving that error also. Since it seems to be built for the December vendor possibly this error is due to a signing key?