hello, so after trying to flash stock lollipop something went wrong and now can't access download mode, i tried to flash laf.img but i can't flash anything using adb, plz help.
When in fastboot mode:
Code:
fastboot flash laf laf.img
doesn't work?
I've restored download mode on a V410 before that way just to see if it would work, and it was successful. I nuked my laf partition intentionally because we didn't use to have a kdz for the V410, and I thought it would be easier to recover the tablet with fastboot available than a useless (for the V410 without a kdz) download mode.
jason2678 said:
When in fastboot mode:
Code:
fastboot flash laf laf.img
doesn't work?
I've restored download mode on a V410 before that way just to see if it would work, and it was successful. I nuked my laf partition intentionally because we didn't use to have a kdz for the V410, and I thought it would be easier to recover the tablet with fastboot available than a useless (for the V410 without a kdz) download mode.
Click to expand...
Click to collapse
Thank you for the replie, no, every time i trie to flash something or unlock the bootloader i get this message : failed (remote: unknown command)
after flash stock rom using miflash and click clean all and lock , the flashing was successful then the phone was stuck on bootloader and now i cant even turn off the phone, the screen stay in fastboot..what should i do? please help me and tell me what to do step by step cz now the bootloader is locked..
Can you post the Miflash log?
Miflash/log folder, Txt file + or -25kb.
Use spoiler.
If you have a Chinese version (K40s)and you have locked the bootloader on a rom other than Chinese, it comes from that.
bvyral said:
after flash stock rom using miflash and click clean all and lock , the flashing was successful then the phone was stuck on bootloader and now i cant even turn off the phone, the screen stay in fastboot..what should i do? please help me and tell me what to do step by step cz now the bootloader is locked..
Click to expand...
Click to collapse
you know the Steps to Flash StockROM, only look 4 another Firmware, iam Think its Not the Correct
System23 said:
you know the Steps to Flash StockROM, only look 4 another Firmware, iam Think its Not the Correct
Click to expand...
Click to collapse
What do you mean( only look 4 another Firmware)?
NOSS8 said:
What do you mean( only look 4 another Firmware)?
Click to expand...
Click to collapse
you must Flash the Correct Firmware 4 ya Device, when ya have this the Device Boot Corectly after Flash it!! thats why iam Think its not the Correct Firmware you used!!
look here to Find your Firmware Xiamoi Pocco F4 Firmware Archiv
System23 said:
you must Flash the Correct Firmware 4 ya Device, when ya have this the Device Boot Corectly after Flash it!! thats why iam Think its not the Correct Firmware you used!!
Click to expand...
Click to collapse
I'm not the OP.
With the bootloader unlock you can flash any version of stock rom, EEA, Global, etc, and lock the bootloader.
Except if you have a K40S or you have to let the bootloader unlock.
System23 said:
look here to Find your Firmware Xiamoi Pocco F4 Firmware Archiv
Click to expand...
Click to collapse
But i got the firmware from here..i choose poco f4 global fastboot type
NOSS8 said:
I'm not the OP.
With the bootloader unlock you can flash any version of stock rom, EEA, Global, etc, and lock the bootloader.
Except if you have a K40S or you have to let the bootloader unlock.
Click to expand...
Click to collapse
Yea..the bootloader is now locked..what should i do?..and can it be done?..
bvyral said:
Yea..the bootloader is now locked..what should i do?..and can it be done?..
Click to expand...
Click to collapse
Do you have a Poco F4 or a K40S?
Can you post the Miflash log?
Miflash/log folder, Txt file + or -25kb.
Use spoiler
bvyral said:
Yea..the bootloader is now locked..what should i do?..and can it be done?..
Click to expand...
Click to collapse
If you need to leave Fastboot mode, just press and keep a combination of the Power button + the Volume Down for about 10 seconds.
have you any Expierience with Fastboot and the Terminal? than i have Read that your Device has A/B Partitions!!! That means SLOT A has now your Flashed Firmware & SLOT B has the older StockROM!!! Normaly when a Partition is Broken it changes the SLOT Automaticly!!!! with Terminal and fastboot can you Interact with the Device via PC!!!! so that you can use this commands to become the Information witch SLOT is Active, and SET one of the Booth Partitions!!!!
Show Activ SLOT
fastboot getvar current-slot
SET a SLOT
fastboot set_active b
or
fastboot set_active a
Show Activ SLOT
fastboot getvar current-slot
Reboot the Device
fastboot reboot
I have write a simple script that Downloads the Firmware,Extract it,copy Files 4 Flash,and Start Flash!!!
you Found that in my Onlinestorage Here >> Xiaomi_POCCO_F4_Firmware_Flash
Only Download it and extract it!!!
Run "Download_Firmware.cmd" and Connect Device via USB to PC and start it in Fastboot-Mode!!!
The Firmware is
Device: POCO F4 Global
Codename: munch
Version: V14.0.2.0.TLMMIXM
Branch: Stable
Type: Fastboot
Size: 6.3 GB
Release Date: 2023-03-12
Package Name: munch_global_images_V14.0.2.0.TLMMIXM_20230312.0000.00_13.0_global_cad4c8f425.tg
After the Download its extract it and delete the Archives and still 1 Firmware Folder exists!!!
After that its start the "flash_all.bat" that comes with this Firmware!!!! So make sure you have Connected the device via USB
to PC and have started Fastboot-Mode!!
than let it Flash the MIUI ROM!!!! if this Method working the Device will be Start normaly!!!
If this not work use "MIFLASHTOOL" and click on select and choose the Firmware Folder!! and Flash it with this Method!!!!
hope one of the Options will Work!!
System23 said:
have you any Expierience with Fastboot and the Terminal? than i have Read that your Device has A/B Partitions!!! That means SLOT A has now your Flashed Firmware & SLOT B has the older StockROM!!! Normaly when a Partition is Broken it changes the SLOT Automaticly!!!! with Terminal and fastboot can you Interact with the Device via PC!!!! so that you can use this commands to become the Information witch SLOT is Active, and SET one of the Booth Partitions!!!!
Show Activ SLOT
fastboot getvar current-slot
SET a SLOT
fastboot set_active b
or
fastboot set_active a
Show Activ SLOT
fastboot getvar current-slot
Reboot the Device
hope one of the Options will Work!!
Click to expand...
Click to collapse
You cannot use Mi Flash with a locked bootloader.
System23 said:
have you any Expierience with Fastboot and the Terminal? than i have Read that your Device has A/B Partitions!!! That means SLOT A has now your Flashed Firmware & SLOT B has the older StockROM!!! Normaly when a Partition is Broken it changes the SLOT Automaticly!!!! with Terminal and fastboot can you Interact with the Device via PC!!!! so that you can use this commands to become the Information witch SLOT is Active, and SET one of the Booth Partitions!!!!
Show Activ SLOT
fastboot getvar current-slot
SET a SLOT
fastboot set_active b
or
fastboot set_active a
Show Activ SLOT
fastboot getvar current-slot
Reboot the Device
fastboot reboot
I have write a simple script that Downloads the Firmware,Extract it,copy Files 4 Flash,and Start Flash!!!
you Found that in my Onlinestorage Here >> Xiaomi_POCCO_F4_Firmware_Flash
Only Download it and extract it!!!
Run "Download_Firmware.cmd" and Connect Device via USB to PC and start it in Fastboot-Mode!!!
The Firmware is
Device: POCO F4 Global
Codename: munch
Version: V14.0.2.0.TLMMIXM
Branch: Stable
Type: Fastboot
Size: 6.3 GB
Release Date: 2023-03-12
Package Name: munch_global_images_V14.0.2.0.TLMMIXM_20230312.0000.00_13.0_global_cad4c8f425.tg
After the Download its extract it and delete the Archives and still 1 Firmware Folder exists!!!
After that its start the "flash_all.bat" that comes with this Firmware!!!! So make sure you have Connected the device via USB
to PC and have started Fastboot-Mode!!
than let it Flash the MIUI ROM!!!! if this Method working the Device will be Start normaly!!!
If this not work use "MIFLASHTOOL" and click on select and choose the Firmware Folder!! and Flash it with this Method!!!!
hope one of the Options will Work!!
Click to expand...
Click to collapse
not working...error:FAILED (remote: Erase is not allowed in Lock State)
OK, original Tools and Firmware cannot Flash in locked BL!! than you can Flash in Recovery or in EDL Mode!! you stuck at Fastboot Mode so you cant Flash via Recovery!!! or you use fastboot in Terminal and test the following commands!!!
Boot Recovery via fastboot
fastboot boot xxx/Images/recovery.img
or
Reboot Recovery
fastboot reboot recovery
or
Flash Boot/Recovery
fastboot flash boot xxx/Images/boot.img
fastboot flash recovery xxx/Images/recovery.img
fastboot reboot
when this not working you can use EDL-Mode!!!
Poco F4 test Point Reboot 9008 EDL - ROM-Provider
Poco F4 test point is typically a set of pins on the device's circuit board that can be shorted together in order to put the device into edl mod
romprovider.com
Than you can Flash it with QPST or QFiL Tool from Qualcomm!!! but i must look when i at home if the fastboot Firmware includes all needed Files!!! rawprogrammer0.xml patch0.xml firehosexxxx.mbn
System23 said:
OK, original Tools and Firmware cannot Flash in locked BL!! than you can Flash in Recovery or in EDL Mode!! you stuck at Fastboot Mode so you cant Flash via Recovery!!! or you use fastboot in Terminal and test the following commands!!!
Click to expand...
Click to collapse
Stop posting non-solutions.
Miflash unusable with the bootloader locked. (Yet noted on the OP).
Regarding your last post, the command syntax is wrong and it will not change anything.
For EDL mode, you don't know, it is not necessary to open the phone to enter EDL mode and anyway, it will not have permission to flash.
QPST or QFiL Tool from Qualcomm may work but not on this device (too recent) and Sahara is a very sensitive program and requires some experience to avoid errors such as:
ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
ERROR: function: sahara_main:983 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Fail process fail.
Poco F4 (Munch) Firmware Flash File (Stock ROM) - ROM-Provider
Download Poco F4 Firmware Flash File stock ROM, here we share latest firmware for Xiaomi Poco F4 with flash tool & usb driver
www.google.de
with MiFlash in EDL-Mode and the EDL-Firmware GLO, its like this Article a working Solution!! and i dont know if fastboot reboot edl with special edl fastboot work, and I dont know if it can Start with ButtonsCombo!!! adb reboot edl is not availible wile stuck at Fastboot-Mode!! iam only give ideas to test them out, in variants they i know!! Iam Testing my variants out to find a way that works!!!
NOSS8 said:
Stop posting non-solutions.
Miflash unusable with the bootloader locked. (Yet noted on the OP).
Regarding your last post, the command syntax is wrong and it will not change anything.
For EDL mode, you don't know, it is not necessary to open the phone to enter EDL mode and anyway, it will not have permission to flash.
QPST or QFiL Tool from Qualcomm may work but not on this device (too recent) and Sahara is a very sensitive program and requires some experience to avoid errors such as:
ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
ERROR: function: sahara_main:983 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Fail process fail.
Click to expand...
Click to collapse
give me more Input, iam intressted to read more!!!
System23 said:
give me more Input, iam intressted to read more!!!
Click to expand...
Click to collapse
This is not the subject of the thread. (do some research).
If it is impossible to enter recovery or fastboot mode and if it is not a HW problem, the phone is in EDL Mode.
It will not appear on the PC unless you install the Qualcomm drivers and will be detected by Miflash (in Fastboot mode, no need to log in) on a com port (login mandatory), but you will not have permission to flash (requires a special account).
This permission is not needed on very old devices.
Until the OP has answered my questions, I could not provide him with a possible solution.
System23 said:
have you any Expierience with Fastboot and the Terminal? than i have Read that your Device has A/B Partitions!!! That means SLOT A has now your Flashed Firmware & SLOT B has the older StockROM!!! Normaly when a Partition is Broken it changes the SLOT Automaticly!!!! with Terminal and fastboot can you Interact with the Device via PC!!!! so that you can use this commands to become the Information witch SLOT is Active, and SET one of the Booth Partitions!!!!
Show Activ SLOT
fastboot getvar current-slot
SET a SLOT
fastboot set_active b
or
fastboot set_active a
Show Activ SLOT
fastboot getvar current-slot
Reboot the Device
fastboot reboot
I have write a simple script that Downloads the Firmware,Extract it,copy Files 4 Flash,and Start Flash!!!
you Found that in my Onlinestorage Here >> Xiaomi_POCCO_F4_Firmware_Flash
Only Download it and extract it!!!
Run "Download_Firmware.cmd" and Connect Device via USB to PC and start it in Fastboot-Mode!!!
The Firmware is
Device: POCO F4 Global
Codename: munch
Version: V14.0.2.0.TLMMIXM
Branch: Stable
Type: Fastboot
Size: 6.3 GB
Release Date: 2023-03-12
Package Name: munch_global_images_V14.0.2.0.TLMMIXM_20230312.0000.00_13.0_global_cad4c8f425.tg
After the Download its extract it and delete the Archives and still 1 Firmware Folder exists!!!
After that its start the "flash_all.bat" that comes with this Firmware!!!! So make sure you have Connected the device via USB
to PC and have started Fastboot-Mode!!
than let it Flash the MIUI ROM!!!! if this Method working the Device will be Start normaly!!!
If this not work use "MIFLASHTOOL" and click on select and choose the Firmware Folder!! and Flash it with this Method!!!!
hope one of the Options will Work!!
Click to expand...
Click to collapse
thanks, after managing to unlock the phone just by moving it to local disk c, after some googling n youtubing, and i tried ur method again ,editing some flash_all bat.((
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *munch" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *munch" || exit /B 1))
and run it....it works.. i sincerely thanks you..
I'm stuck in unbootable mode, can you help me step by step? I ran the "partition" command and got the following results:
PartitionNumber DriveLetter Offset Size Type
1 1048576 260 MB System
2 273678336 16 MB Reserved
3 C 290455552 212.23 GB Basic
4 D 228168040448 25 GB Basic
5 255011586048 1000 MB Recovery
So, I think no memory is burnt. I've been trying for two days, but I don't understand what I'm doing wrong. I tried "flash_allAFT" but it gives me a failure. Can you tell me which code I can post? Thank you all.
"FAILED, fastboot.exe flash all WW_ZS660KL_17.0240.2103.75_M3.23.44.19-ASUS_1.1.229_Phone-user.raw failure, EXIT!"
anto-chipset said:
"FAILED, fastboot.exe flash all WW_ZS660KL_17.0240.2103.75_M3.23.44.19-ASUS_1.1.229_Phone-user.raw failure, EXIT!"
Click to expand...
Click to collapse
Flash in edl mode with edl Firmware
"I have an EU version, but I can only find WW or CN. Can you translate this into English?"
anto-chipset said:
"I have an EU version, but I can only find WW or CN. Can you translate this into English?"
Click to expand...
Click to collapse
Tutorial to flash your phone in edl mode.
If you can access fastboot mode then connect it to pc and open cmd and enter following command to enter in edl mode fastboot oem enter-dload
Make sure you have fastboot and qualcomm drivers installed and driver signature verification is disabled on your windows machine.
if no access to fastboot mode then please use the edl cable to boot in edl mode.
Repair your ROG2 phone with EDL mode，Official firmware！
Success is disgusted by some people, and will not share any files for free in the future.
forum.xda-developers.com
And here are the files required
Asus ROG 2 Firmware by VIKRANT.zip
drive.google.com
MI flash tool link to flash the firmware
MiFlash2018-5-28-0.zip
drive.google.com
fastboot devices
JAAZGV200231FRL fastboot
PS C:\Users\wras\Documents\rog> fastboot oem enter-dload
...
FAILED (remote: unknown command)
finished. total time: 0.000s
miflash : can not found file flash _all bat.
thanks for your patience if you can get me to fix this dead cellphone i will give you a fee