1.
Rsrc2_S8500(Low).rc2
Rsrc2_S8500(Mid).rc2
Differs in 1 Byte...
2.
This Byte enables Debug Mode, there are 3 Values (maybe more):
00 - OFF---> Internal menu not work--->Low
01 - On ----> Internal menu work -> MID
02 - then also Samsung DIAGnostic Port is activated and full Debug
Internal menu is this thingie here:
http://forum.xda-developers.com/showthread.php?t=906966
3.
There are several Boot Pictures included...
http://forum.xda-developers.com/showpost.php?p=10624798&postcount=4
First short test is attached.
Not exact match...
First Goal is to change for instance Pictures.
Best Regards
how did you skip press "0" for 2 secs message?
10 bpp... maybe we can bring more color into it.
This Pic starts at 0x21000
00 is black
FF seems white... if someone only paint via HEX Editor.
Attached are 3 Original RC2 files and extracted RAW Pic...
Irfanview Settings are on Screenshot.
Best Regards
Edit 1.
The other Pic after this is Battery...
Edit 2.
Maybe 16 bpp
480 x 800 Pixel * 2 Byte (16 bpp) = 768000 Byte
My RAW files are too big. Need to cut few Bytes... sorry.
http://home.arcor.de/xgidesign/test/resman_ge_down.html
resMAN converts into correct 16 bpp Format.
It seems more features included, like TFS Browser... not tested yet.
Tested and works.
Now I have colorfull Bootscreen.
I have only identified 2 Pictures... Logo and Battery. Both 480 x 800 Pixel.
Best Regards
Can you upload one sample screen from yours colorfull Bootscreen?? thanks...
1.
As Example Cat taken from Wallpaper... resized and cut to fit 480 x 800 Pixel.
Insert via ResMAN...
Only Bootlogo changed...
2.
Disable MD5 Check at End of file...
3.
Changed Flag 0 to 1 at Start of file, to use Internal Menu:
http://forum.xda-developers.com/showthread.php?t=906966
Now Code *#7092463*# is working.
Best Regards
... hello adfree watch the screen shot that you enclose ...
First Pic starts at:
0x21000
Bootlogo 480 x 800 Pixel
768000 Byte
Second Picture:
0xDC800
"Waitscreen" for Battery
480 x 800 Pixel
768000 Byte
Example attached... now with Cat and Flowers.
Questions...
1.
The other Pictures... which Resolution, where to find...
2.
At Start I see from T-Mobile String DEF...
chinese Firmware shows CHN...
Is this CSC settings? But nothing happens...
3.
What else is between 0 and 0x21000 ?
And 0x198000 - End of file ( I mean this as End CDABCDAB before String S8500)
Thanx in advance.
Best Regards
After I overwrote with FF for white color I found third Picture.
The blue handset known from Download Mode via Kies for instance...
Maybe something like that 100 x 250 Pixel...
I will try to find exact position and extract RAW. Now I know what it is...
Best Regards
adfree said:
1.
As Example Cat taken from Wallpaper... resized and cut to fit 480 x 800 Pixel.
Insert via ResMAN...
Only Bootlogo changed...
2.
Disable MD5 Check at End of file...
3.
Changed Flag 0 to 1 at Start of file, to use Internal Menu:
http://forum.xda-developers.com/showthread.php?t=906966
Now Code *#7092463*# is working.
Best Regards
Click to expand...
Click to collapse
Hi adfree,
How did you make step 2?
Disable MD5 Check at End of file...
I have modify my bootlogo with resman but when I try it with multiloader I got this message: Can not open: Rscr2!
I try rc2 low on resman.
http://forum.xda-developers.com/showpost.php?p=10553753&postcount=40
Here you find answer about MD5 disable.
Best Regards
Thanks adfree, it's ok now I can use a modifyed rc2 file on multiloader.
But realy don't understand now how to modify boot image with resman
Can you try with this file and say me if it's possible to use please?
I convert it on bmp to use on resman.
Your Picture as RAW, ready to input.
Use HEX Editor.
Start is at:
0x21000
Resman can do the whole job for you, but I'm lazy... ehm busy now to write How To.
You need correct Rsrc2_S8500(Low).rxt...
I will try to make one next days... as my is not fully correct.
Best Regards
Ok thanks, if you can do a "how to" when you have the time, that would be great
The 3. Picture is the Download Mode Icon...
116 Pixel x 285 Pixel
The 4. Picture is if something goes wrong during Update... Errormessage...
176 Pixel x 80 Pixel
Need to check exact Resolution and Position... so I can make correct Rsrc2_S8500(Low).rxt for Resman.
Best Regards
lasentenza said:
Ok thanks, if you can do a "how to" when you have the time, that would be great
Click to expand...
Click to collapse
Do that and will sticky it. Let me know what else
adfree said:
Your Picture as RAW, ready to input.
Use HEX Editor.
Start is at:
0x21000
Click to expand...
Click to collapse
Hello adfree,
Thanks
I do not have wave anymore for testing, but will keep it and test asap.
Hello Adfree,
I tasted it and I got this on the wave
Not ok but it's a good begining lol
Looks like smaller Resolution...
I will check if I made mistake.
Sorry.
Can you please attach your RC2 file?
So I can test it easier.
Thanx.
Best Regards
Re adfree,
Here is the rc2 file modified
http://www.multiupload.com/RSJNZGZWDJ
And I add you the picture on jpg format.
Thanks a lot
New year, new attempt.
I've read that in XXLA1 Browser is not able to use hundrets of MB, like your PC, where you can see in Task Manager temporary memory is reserved...
For me I can see over 1500 MB...
Okay. No joke.
Lets investigate why resource problem...
1.
b.kubica rocks ever and ever again.
Thank you very much.
http://forum.xda-developers.com/showpost.php?p=21958851&postcount=224
With this and TriX you can expand all *.so files. Also Dolfin.
Dolfin not changed since XXKK5...
2.
Dolfin source is here:
https://opensource.samsung.com/rece...application&classification2=&classification3=
Its NOT exact for bada, but...
3.
With WinComm we can log what happens in Background...
http://forum.xda-developers.com/showthread.php?t=928170
Maybe we can find Limits by Dolfin...
Maybe we can tweak Dolfin....
But before we need to understand how it works....
Maybe someone can host own site for test and SIMPLE make 1 HTML content with 1 JPG...
Try different sizes of JPG...
Maybe start with 10 MB jpg file...
If Dolfin can handle it, increase size... oterhwise reduce size...
It would be interessting. How much MB Dolfin can handle, before site is too big or resource problem occured.
Thanx for reading.
Best Regards
Hi Adfree,
I don't know if it is related with the topic that you are researching in this thread, but looking into firmware files using Trix or Wave Remaker you can found some browser config files (in FFS/SystemFS/User/Br folder) where you can see the following parameters:
dolfinconfig_osp.ini:
Code:
// MEMORY Configuration - START
BAL_MAX_MEMORY_USAGE=80
BAL_BACKINGSTORE_MAX_MEMORY_USAGE=85
BAL_MAX_PLATFORM_ALLOCATE=4096988 //4 * 1024 * 1024
BAL_RESERVED_MEMORY_THRESHOLD=8388608 //8*1024*1024
BAL_MAX_IMAGE_BUFFER_SIZE=20971520 //20mb
BAL_MAX_IMAGE_CANVAS_BUFFER_SIZE=4194304 //4mb
If you look for strings in Dolfin.so you can find some references to this parameters also.
I don't know if this info is useful for your research, but I hope so
Cheers!
if you need a web hosting for your project i can provide you as much as space you want for free!!!
I have not much time yet.
But I think good start is investigation of:
dolfinconfig_osp.ini
Or find similar config files... you can also try to modify them...
Thanx amaciarey.
Check for instance KK5, KK7, KL6, LA1 and maybe also helpfull.
Check S8600 Firmware...
Maybe more reserved...
About webspace...
Not much needed. Only for test, how big content can be, before Dolfin strikes...
Best Regards
I have problem with usual sites on dolphin
even when i open www.badaos.net in 2 tabs sometimes it says "the page is too large"
i want to help this project but i dont know why stune doesnt work on my FW:
XXKL6 asian language
so how can i access to dolphin config files? thnx
---------------------
Webspace sent to adfree
the domain is www.dolphintest.co.cc
that now it's empty!!
---------- Post added at 05:11 PM ---------- Previous post was at 04:19 PM ----------
now a 13MB !! image is set at www.dolphintest.co.cc
adfree said:
I have not much time yet.
But I think good start is investigation of:
dolfinconfig_osp.ini
Or find similar config files... you can also try to modify them...
Thanx amaciarey.
Check for instance KK5, KK7, KL6, LA1 and maybe also helpfull.
Check S8600 Firmware...
Maybe more reserved...
About webspace...
Not much needed. Only for test, how big content can be, before Dolfin strikes...
Best Regards
Click to expand...
Click to collapse
That's a good idea Adfree i'm downloading the last available S8600 firmware right now, if there's something interesting i'd post it here.
Cheers!
my Internet speed is low
so please someone test this page on dolphin
http://www.dolphintest.co.cc/
r_22009 said:
my Internet speed is low
so please someone test this page on dolphin
Click to expand...
Click to collapse
For me the page is working but Dolfin does not show the image. I think that size of images is limited to 20971520 bytes (20 MB) or maybe 4194304 bytes (4 MB), and i'm pretty sure that your image is bigger than that.
Cheers!
EDIT: About your problem with Stune... if you want to use Stune in Bada 2.0, you need to use 1.0.6 Version otherwise it's not working. Maybe this is your problem ??
EDIT 2: I have just seen your previous post right now... sorry for that.
I think that Dolfin supports images smaller than 4 MB, keeping the sum of all images below 20 MB... can you try to put in your page several images. But keeping the total weight of the images below 20 MB, and one of them bigger than 4 MB. I'm sorry to ask you to work . Thanks in advance
I think it is easier to patch ini files through PFS instead of Stune because some files are made read only
PFS example is attached with original ini file
Edit it from Wave Remaker and test
Note that the files are in two directories and you need to edit both
Best Regards
mylove90 said:
I think it is easier to patch ini files through PFS instead of Stune because some files are made read only
PFS example is attached with original ini file
Edit it from Wave Remaker and test
Note that the files are in two directories and you need to edit both
Best Regards
Click to expand...
Click to collapse
Sorry for the noob question mylove90 but... if i understand you correctly, the only thing that i have to do, is a low flash using your .pfs file? Please, correct me if i'm wrong.
Cheers!
Take a look at index
i've put 4 images each of theme around 4mb
about stune, i'm using 1.0.6 and it can connect but i cannot browse my files
Edit: Thank you my problem is solved
i think my stune had problem
it was solved with another stune downloading!
@amaciarey
You are totally right
Let's do some tweaks in that thing
Best Regards
I have now little bit time to check out few basics...
I need now some hours...
Best Regards
Edit 1.
Short checked different Firmwares...
Code:
XPKG5
BAL_MAX_MEMORY_USAGE=80
BAL_BACKINGSTORE_MAX_MEMORY_USAGE=85
BAL_MAX_PLATFORM_ALLOCATE=4096988 //4 * 1024 * 1024
BAL_RESERVED_MEMORY_THRESHOLD=14680064 //14*1024*1024
//FILE PATH Configuration
XPKH1
BAL_MAX_MEMORY_USAGE=80
BAL_BACKINGSTORE_MAX_MEMORY_USAGE=85
BAL_MAX_PLATFORM_ALLOCATE=4096988 //4 * 1024 * 1024
BAL_RESERVED_MEMORY_THRESHOLD=1048576 //1*1024*1024
KK5
and also
LA1
BAL_MAX_MEMORY_USAGE=80
BAL_BACKINGSTORE_MAX_MEMORY_USAGE=85
BAL_MAX_PLATFORM_ALLOCATE=4096988 //4 * 1024 * 1024
BAL_RESERVED_MEMORY_THRESHOLD=8388608 //8*1024*1024
BAL_MAX_IMAGE_BUFFER_SIZE=20971520 //20mb
BAL_MAX_IMAGE_CANVAS_BUFFER_SIZE=4194304 //4mb
S8600...
BAL_MAX_MEMORY_USAGE=80
BAL_BACKINGSTORE_MAX_MEMORY_USAGE=85
BAL_MAX_PLATFORM_ALLOCATE=4096988 //4 * 1024 * 1024
BAL_RESERVED_MEMORY_THRESHOLD=8388608 //8*1024*1024
BAL_MAX_IMAGE_BUFFER_SIZE=20971520 //20mb
BAL_MAX_IMAGE_CANVAS_BUFFER_SIZE=4194304 //4mb
Edit 2.
Short logged with WinComm Standard Samsung site...
Code:
WMM : Total 13631488 bytes allocated from platform, current = 2097152 bytes
WMM : Total 11534336 bytes allocated from platform, current = -2097152 bytes
This I can see if I visit gamershell
Code:
WMM : Total 24117248 bytes allocated from platform, current = 2097152 bytes
WMM : Total 22020096 bytes allocated from platform, current = -2097152 bytes
Cache Debug, expires now: expire:3502855669 devicetime:3502829991
Edit 3.
Why not analyze whole folder?
SystemFS\User\Br
More ini files...
In other forum nice user posted this as example:
http://melander.dk/delphi/dragdrop/
Thanx.
It works on my S8530.
Maybe someone can please post sites where Dolfin give up...
Site too big not enough memory etc...
Thanx.
Best Regards
I'm sorry but i've been busy the last days...
@r_22009:
I tried to load the webpage in wave's browser but none of the images is shown . Maybe we have to analyze all the .ini files in /User/Br folder to find the right one to edit.
@mylove90:
I didn't have so much time to play with your .PFS file... but i will do it, i promise
@Adfree:
I'm not clever enough to fully understand your WinComm logs, but i've been analyzing the available heap memory through internal menu with dolfin running in background (only dolfin) after a soft reset (so the RAM of the device was clean) and it crashes when the allocated memory is about 80 MB, so i think that maybe the answer is in one of the *.ini files in /Br folder. I think is a good idea to analyze the behavior of dolfin in problematic web pages. In spain there is a web of a newspaper that crashes with all Bada 2.0 firmwares up to now. It is w w w.as.com (i'm sorry but i can't post links yet). This web page has a lot of flash contents, images and other heavy stuff.
Cheers!
Good job.
Thanx.
www.as.com
Is no porn, its spanish sportsite.
My S8530 crashes...
short freeze, then reboot...
Before I had forced Dolfin with 4 Tabs at same time...
Code:
www.chip.de
www.melander.dk/delphi/dragdrop/
www.ebay.de
www.gamershell.com
Now with as.com site we could play with Internet settings...
Maybe disable flash and all is good...
I'm not clever enough to fully understand your WinComm logs,
Click to expand...
Click to collapse
Same problem here. I'm also not fully understand WinComm...
But I try to learn.
Best Regards
First attempt.
Disabled JAVA Script + Flash.
Then www.as.com is running.
Now Question and or or...
Maybe both JAVA Script AND Flash... or maybe only 1
We will see.
Best Regards
3 short tests:
1.
JAVA Script + Flash disabled.
as.com runs.
2.
JAVA Script again enabled.
Reboot.
3.
JAVA disabled, Flash again enabled.
as.com runs.
So 1 problem could be JAVA Script...
Now I'll try to log with WinComm... maybe I see something...
Best Regards
It seems S8600 users with more RAM have less problems...
5 Tabs at same time seems maximum...
I have short tried with reduced rcs (smaller CSC file)... seems no affect...
Will try with both... modified RC1 and rcs...
Error messages can be found in Browser.rsr in CSC with Wave_Remaker
Best Regards
RC1 optimization : http://forum.xda-developers.com/showpost.php?p=22907665&postcount=69
Combined with CSC optimization : i ripped of all unused languages and keeps Arabic & English only in both strings & Keyboard
Now www.as.com opens on my phone normally with no freezing or rebooting
Any other page that give page too large please to test ??
Best Regards
Hello there ...
I didn't found any information about the special .jpg files format used by htc for some images.
I imagine that these files are using an alpha channel ... but Photoshop is unable to read them. Any soft to convert these specials .jpg to .png ?
See attached example.
Thanks !
not sure if this will work but used it with m10 editor to change images in a rom.
http://pixlr.com/editor/
allows you to save images as .png after editing
exocetdj said:
not sure if this will work but used it with m10 editor to change images in a rom.
http://pixlr.com/editor/
allows you to save images as .png after editing
Click to expand...
Click to collapse
thanks, but the image was converted in png as it was in jpg format ... no conversion, no special jpg format detection ...
very strange this format !
I request the possibility to upload log files to xda. Actually I have to rename our compress them.
Use http://pastebin.com/
For log files, the best thing is to either embed them in the post - use the CODE tag (the part that is relevant) - or to zip them up to save space, then attach them.
I've used pastebin for very large sizes, doesn't overload xda and you can read it directly.