Related
UPDATE TO THE MOST RECENT VERSIONS NUGAT AND OREO
FLASHING METHOD
Hello with all, I introduce myself I am catuv21 I enter this beautiful community and I have made roms for the huawei P9lite 2016, today I will leave these works for this great terminal Huawei P10lite thanks to a community of technicians that having seen my work for Pllite, they sent me a P10lite bluish, to which I am grateful and will be presenting works in this community, such as roms MidgarD (modified cover stock), MorfuZ (based on kangvip), and others.
HTML:
- An advert! The Flash phone can have bricks. I'm not responsible for that:p:p.
- If you are not sure, do not make any changes and you can leave this forum:confused::confused:.
- This method uses a modified stock recovery that does not verify the files.
- It serves to update firmware, as well as update to Oreo, but not to do Downgrade Nougat.
- also serves to perform rebrand changing cust.
- make copies of data and applications.
- I will not explain how to unlock the bootloader and install twrp, there are many tutorials.
- with this method the bootloader will be blocked again.
EXPERIENCE
- my compilation was WAS-LX3C605B172 and update to WAS-LX3C605B186 (demo video)
- being in WAS-LX3C605B186 I changed from cust REBRAND, to compilation WAS-LX1C432B208 (demo video)
- finally being in WAS-LX1C432B208 UPDATE FLASH WAS-LX1C432B321 (8.0.0.321) (demo video)
REQUIREMENTS:
- activate OEM unlocking from developer options.
- Unlock the bootloader.
- install recovery twrp P10 lite nougat
- download the firmware finder.exe to download the updates
- download the firmware of your compilation and / or rebrand compilation
- Download the HWOTA file and unzip.
- minimum battery of 50%
PROCESS.
FLASH UPDATE
- unzip the file HWOTA.zip
- download the firmware of your compilation (settings / about the phone)
- the firmware is three files in the update.zip, update_data_full_public.zip and update_full_XX-LXX_hw_xx
- the latter "update_full_XX-LXX_hw_xx" there are usually several L21, L01, etc. just download one and it will depend on the cell model.
- If there are not three, it does not work.
- Rename the firmware as follows : update.zip, update_data_public.zip, update_all_hw.zip
- copy and paste the renamed files into the "HWOTA" directory.
- the HWOTA folder, copy and paste in the external memory.
- turn off the cell phone and boot in recovery twrp.
- change to external memory.
- find the HWOTA folder and flash the OTA_catuva21.zip file
- the cell phone will automatically restart
- and start updating let it finish
- if for some reason it remains on the black screen, or sticks to the huawei logo
- perform hard reset (press the volume more and power, and perform both wipes)
- CONGRATULATIONS UPDATE YOUR ANDROID.
REBRAND
- unzip the file HWOTA.zip
- download the "WAS-L ... C ... oeminfo.zip" (it's a flasheable file)
- download the firmware, this depends on the brand you want to change "WAS-L ... C ... oeminfo.zip"
- rename updates: follow steps 3 to 8 of FLASH UPDATE
- Create a folder in the external memory and paste the "WAS-L ... C ... oeminfo.zip" of your selection.
- turn off the cell phone and boot in recovery twrp.
- change to external memory.
- search the folder oeminfo and flash "WAS-L ... C ... oeminfo.zip"
- DANGER DANGER:crying::crying:
- when finished flashing DO NOT REALIZE REBOOT SYSTEM
- return to the main screen.
- select reebot.
- select bootloader and automatically restart in fastboot mode.
- and as you will see the bootloader is blocked.
- unlock the bootloader with your code (if it is in red, just unlock)
- once unlocked it will boot in recovery twrp.
- search the HWOTA folder
- find the HWOTA folder and flash the OTA_catuva21.zip file
- the cell phone will automatically restart
- and start updating let it finish
- if for some reason it remains on the black screen, or sticks to the huawei logo
- perform a hard reset (press the volume more and power until the wipes menu appears)
- CONGRATULATIONS UPDATE YOUR ANDROID .
CREDITS
CATUVA21 (to be adapted for this terminal)
Idrees Patel (take your night recovery, and adapt)
mankindtw (use your flash method that I publish for high ranges)
FirmwareFinder (for publishing the updates)
GOOD LINK OF THE BASE OF THIS WORK
[Guide] Mate 9 Flash Oreo Update Package and Downgrade Nougat
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Huawei P8 Lite 2017 / Honor 8 Lite Android Oreo update brings Project Treble support
https://www.xda-developers.com/huaw...e-android-oreo-update-project-treble-support/
Removed
at the moment there are only two oeminfo flas
WAS-LX1C432 dual sim
WAS-LX3C605 dual sim
You can share your message to make it flashable.
Removed
CATUVA21 said:
UPDATE TO THE MOST RECENT VERSIONS NUGAT AND OREO
FLASHING METHOD
Hello with all, I introduce myself I am catuv21 I enter this beautiful community and I have made roms for the huawei P9lite 2016, today I will leave these works for this great terminal Huawei P10lite thanks to a community of technicians that having seen my work for Pllite, they sent me a P10lite bluish, to which I am grateful and will be presenting works in this community, such as roms MidgarD (modified cover stock), MorfuZ (based on kangvip), and others.
HTML:
- An advert! The Flash phone can have bricks. I'm not responsible for that:p:p.
- If you are not sure, do not make any changes and you can leave this forum:confused::confused:.
- This method uses a modified stock recovery that does not verify the files.
- It serves to update firmware, as well as update to Oreo, but not to do Downgrade Nougat.
- also serves to perform rebrand changing cust.
- make copies of data and applications.
- I will not explain how to unlock the bootloader and install twrp, there are many tutorials.
- with this method the bootloader will be blocked again.
EXPERIENCE
- my compilation was WAS-LX3C605B172 and update to WAS-LX3C605B186 (demo video)
- being in WAS-LX3C605B186 I changed from cust REBRAND, to compilation WAS-LX1C432B208 (demo video)
- finally being in WAS-LX1C432B208 UPDATE FLASH WAS-LX1C432B321 (8.0.0.321) (demo video)
REQUIREMENTS:
- activate OEM unlocking from developer options.
- Unlock the bootloader.
- install recovery twrp P10 lite nougat
- download the firmware finder.exe to download the updates
- download the firmware of your compilation and / or rebrand compilation
- Download the HWOTA file and unzip.
- minimum battery of 50%
PROCESS.
FLASH UPDATE
- unzip the file HWOTA.zip
- download the firmware of your compilation (settings / about the phone)
- the firmware is three files in the update.zip, update_data_full_public.zip and update_full_XX-LXX_hw_xx
- the latter "update_full_XX-LXX_hw_xx" there are usually several L21, L01, etc. just download one and it will depend on the cell model.
- If there are not three, it does not work.
- Rename the firmware as follows : update.zip, update_data_public.zip, update_all_hw.zip
- copy and paste the renamed files into the "HWOTA" directory.
- the HWOTA folder, copy and paste in the external memory.
- turn off the cell phone and boot in recovery twrp.
- change to external memory.
- find the HWOTA folder and flash the OTA_catuva21.zip file
- the cell phone will automatically restart
- and start updating let it finish
- if for some reason it remains on the black screen, or sticks to the huawei logo
- perform hard reset (press the volume more and power, and perform both wipes)
- CONGRATULATIONS UPDATE YOUR ANDROID.
REBRAND
- unzip the file HWOTA.zip
- download the "WAS-L ... C ... oeminfo.zip" (it's a flasheable file)
- download the firmware, this depends on the brand you want to change "WAS-L ... C ... oeminfo.zip"
- rename updates: follow steps 3 to 8 of FLASH UPDATE
- Create a folder in the external memory and paste the "WAS-L ... C ... oeminfo.zip" of your selection.
- turn off the cell phone and boot in recovery twrp.
- change to external memory.
- search the folder oeminfo and flash "WAS-L ... C ... oeminfo.zip"
- DANGER DANGER:crying::crying:
- when finished flashing DO NOT REALIZE REBOOT SYSTEM
- return to the main screen.
- select reebot.
- select bootloader and automatically restart in fastboot mode.
- and as you will see the bootloader is blocked.
- unlock the bootloader with your code (if it is in red, just unlock)
- once unlocked it will boot in recovery twrp.
- search the HWOTA folder
- find the HWOTA folder and flash the OTA_catuva21.zip file
- the cell phone will automatically restart
- and start updating let it finish
- if for some reason it remains on the black screen, or sticks to the huawei logo
- perform a hard reset (press the volume more and power until the wipes menu appears)
- CONGRATULATIONS UPDATE YOUR ANDROID .
CREDITS
CATUVA21 (to be adapted for this terminal)
Idrees Patel (take your night recovery, and adapt)
mankindtw (use your flash method that I publish for high ranges)
FirmwareFinder (for publishing the updates)
Click to expand...
Click to collapse
This is bad instruction. My HwOTA will rename the files of firmware automatically. Rebrend works in hwota, no need to flash "WAS-L ... C ... oeminfo.zip"
Can i use it to change from an android 7 custom rom to the official android 7 emui?
Mapl3x said:
Can i use it to change from an android 7 custom rom to the official android 7 emui?
Click to expand...
Click to collapse
yes you can, but my test was from a modified emui rom, but not from aosp
it worked
CATUVA21 said:
yes you can, but my test was from a modified emui rom, but not from aosp
Click to expand...
Click to collapse
it worked, now you have an official test who proves it works, thanks a lot
Mapl3x said:
it worked, now you have an official test who proves it works, thanks a lot
Click to expand...
Click to collapse
thanks to you for doing it, now you can return to emui.
After i go from cm to official emui 5.1, i forced the update to 8.0.0 using hwota,but my phone serial is still the emui 5.1 serial, what i need to do? Can i change it manually? (I have root)
(During the update it was an error but after the reboot and the low factory reset it work)
Worked!
OMG. It worked on WAS-LX21C432 EMUI 5.1.1!!! Thank you very much. Also I have a question. Can I make "how to install" video? Thank you
Can i flash oreo update from c432b198 build
Thread closed until download links are available that are not pay per click.
Edit: Thread reopened.
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what I could do next to approach the problem?
Best
rob
Well, you didn't had TWRP as recovery, so no nandroid backup available. From one of my experiences with flashing a stock rom for acer, I had to delete some lines of code from the meta inf folder relating the version of the phone, in order to successfully flash it. Maybe the stock ROM you are trying has some lines of code detecting if bootloader unlocked.
Im also having trouble getting a good tutorial for getting rid of the os or just to have magisk on the tablet
You dowoad latest rom and flash stock via hru and. Twrp search xda
unbrick Huawei MediaPad M5 Lite
r0b said:
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what I could do next to approach the problem?
Best
rob
Click to expand...
Click to collapse
Unbrick using Huawei Multi tool .
---------- Post added at 03:14 PM ---------- Previous post was at 03:10 PM ----------
r0b said:
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what could do next to approach the problem?
dnrob
Click to expand...
Click to collapse
You can install these roms only if you can downgrade to update v177 and lower
Like me you need to Unbrick your mediapad m5 lite
First place need to go back in Fastboot mode.
So UNPLUG , turn off , wait a second and turn on with volume Down , when screen blink release power button and keep volume down pressed a second until Fastboot mode
Or, try to boot in Fastboot with volume down + power AND USB plugged in goes into fastboot, or TWRP if you flashed TWRP to RECOVERY2 instead to RECOVERY.
If doesnt work try the same plug or unplug cuz we have Recovery_ramdisk , eRecovery and eRecovery2
WHEN its okay and you can turn on fastboot mode
Second prepair the img's for unbricking
The LEGIT methods its come back stock rom , then you'll be able to do what you want.
Download Huawei Multi-Tools , Huawei Update Extractor and update.zip of your stock ROM and update_data_full
Then use Huawei Update Extractor to extract
system.img ramdisk.img recovery_ramdisk.img From update.app\update.zip and
Cust.img from update.app\update_full_public.zip.
If you have backup of your userdata.img its the time to put all together in the same directory before go futher.
If all its good , you just need to click unbrick.
Maybe i'll soon do a guide for unbrick and prevent brick , and how install twrp without losing data or encryption data
helmuth said:
And just for the complete list:
Volume up + power AND USB plugged in goes into eRecovery (or TWRP, if you flashed TWRP to RECOVERY2 instead to RECOVERY)
Volume up and down + power and USB plugged in forces update via USB (indicated by a little USB-like icon in the recovery circle. The progess bar goes to 5% and waits for input from your PC)
Click to expand...
Click to collapse
RAMDISK238.img, Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip and twrp8.img you will find at
android-hilfe.de->forum huawei-mediapad-m5-lite -> custom-roms-mediapad page-5
Theese custom roms should work:
Andy Yan's LineageOS 17 (Android 10) -> lineage-17.0-20191231-UNOFFICIAL-treble_arm_avN.img.xz
Pierre-Hugues Husson AOSP 10.0 v209 -> system-quack-arm64-aonly-vanilla.img.xz
Following this guide you will loose all your data so be sure to have a backup
This should work for a Mediapad M5 lite BAH2-W19OCEC432-238
Precondition: Unlocked Bootloader / OEM Unlocked / USB Debugging active
1. if you brick your device don`t blame me
2. check, if the version B238 is installed
3. back up your data
4. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
Fastboot:
5. boot into Fastboot Mode.
6. flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
7. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. In lineageos you can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
8. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
9. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
10. Reboot -> Bootloader (not System!!!)
Fastboot:
11. fastboot flash ramdisk RAMDISK238.img
12. fastboot flash system lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img
(or AOSP 10.0 v209)
13. fastboot reboot
LineageOS should start.
other custom roms could work as well.......
Edit:
There´s a new version of LineageOS available:
https:######sourceforge.net###projects###andyyan-gsi###files###lineage-17.x###lineage-17.1-20200111-UNOFFICIAL-treble_arm64_avN.img.xz###download
replace ### with /
It works well on my m5lite
It did not work on B239
I am trying now to get back to the stock rom.
I think the problem is with RAMDISK238.img :/
Do you know how to get one for 239?
Thanks !
BesterTrainer said:
RAMDISK238.img, Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip and twrp8.img you will find at
android-hilfe.de->forum huawei-mediapad-m5-lite -> custom-roms-mediapad page-5
Theese custom roms should work:
Andy Yan's LineageOS 17 (Android 10) -> lineage-17.0-20191231-UNOFFICIAL-treble_arm_avN.img.xz
Pierre-Hugues Husson AOSP 10.0 v209 -> system-quack-arm64-aonly-vanilla.img.xz
Following this guide you will loose all your data so be sure to have a backup
This should work for a Mediapad M5 lite BAH2-W19OCEC432-238
Precondition: Unlocked Bootloader / OEM Unlocked / USB Debugging active
1. if you brick your device don`t blame me
2. check, if the version B238 is installed
3. back up your data
4. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
Fastboot:
5. boot into Fastboot Mode.
6. flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
7. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. In lineageos you can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
8. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
9. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
10. Reboot -> Bootloader (not System!!!)
Fastboot:
11. fastboot flash ramdisk RAMDISK238.img
12. fastboot flash system lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img
(or AOSP 10.0 v209)
13. fastboot reboot
LineageOS should start.
other custom roms could work as well.......
Edit:
There´s a new version of LineageOS available:
https:######sourceforge.net###projects###andyyan-gsi###files###lineage-17.x###lineage-17.1-20200111-UNOFFICIAL-treble_arm64_avN.img.xz###download
replace ### with /
It works well on my m5lite
Click to expand...
Click to collapse
sasuke988 said:
It did not work on B239
I am trying now to get back to the stock rom.
I think the problem is with RAMDISK238.img :/
Do you know how to get one for 239?
Thanks !
Click to expand...
Click to collapse
https://
pro-teammt.ru/
en/
online-firmware-database/
?firmware_model=BAH2-W19&firmware_page=0
Check out your model (C432C431/...)
Use the huawei extractor to extract the images
Can someone check if this is legit? https://romprovider.com/2019/09/9-1-0-151-b151-firmware-jordan2-l09b/amp/
Raresh T said:
Can someone check if this is legit? https://romprovider.com/2019/09/9-1-0-151-b151-firmware-jordan2-l09b/amp/
Click to expand...
Click to collapse
It's for the 8" screen variant. It won't work on our 10.1"
is there any current custom house for this model because no links work. And on the stock, I have a problem with 5ghz Wi-Fi
You'd better install TWRP,flash FBE-disabler and format data partition
Anyway,firmware can be found at professorjtj.github.io and I recommend you rebrand and update it to EMUI9 to get better treble compatibility
SkipM4 said:
You'd better install TWRP,flash FBE-disabler and format data partition
Anyway,firmware can be found at professorjtj.github.io and I recommend you rebrand and update it to EMUI9 to get better treble compatibility
Click to expand...
Click to collapse
thats an interesting suggestion. could you post some guides on how could someone rebrand their device ?
[AOSP 10.0] [2019-12-06] Quack Phh-Treble boot on my wiko view 2 go but not the google gsi is sou strange any fix?
Stuck on wiko powered by android logo no boot animation nothing
If your device supports treble you need to extract Boot IMG file and patch it in magisk Manager with dm-verity Option disabled. Its under advanced / keep AVB 2.0 /DM Verity. Leave that Option unticked and go then in install / choose and patch file and select your Boot img
Dont work somthing have google gsi my phone dont like
i see phone enter in fastboot mode instead of boot system
Not compatility with System as root that is the problem for mi
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Video Link:
Credit:
1. @ianmacd
2. @redymedan
Mohd Masab said:
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Credit:
1. [email protected]
2. Recovery-Mode
Click to expand...
Click to collapse
Keep up to making the next tutorial on Galaxy A51
Hello
Mohd Masab
It's my first Samsung .I had 4-5 Sony ,easy to root ,a Doogee S90 (NEVER BUY THAT !).
Is your method safe ,have U seen bad effects ,what fonctions did U lost ?
Bye .
Fred
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
hargitomi said:
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
Click to expand...
Click to collapse
I did what you said but still encrypts after reboot. Latest Magisk.
Hi, I am having problems with internal storage, I can not create folders and there are applications that I can not download, any solution?
Could someone tell me if it is compatible with the November update CTK1?
I have managed to root the phone, you can install everything and configure it, but after turning off the phone, I can't start it does bootloop, and it returns to the prompt "The phone is not running Smasung official software ..." never finishes starting? What do you recommend me to do?
020221
I reloaded the original rom and did the procedure again, taking into account the clarification of installing install dm_verity and Magisk after each other, without a reboot, and everything went well!
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
It worked for me but i can't access themes and other system apps
Is there any solution to access themes on rooted a51
Everything working well for me, thanks !
For ameer419 ,maybe try to flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip after EACH other thing U flash in TWRP ...
Good luck !
Hello everybody !
Bootloop til this morning ,maybe my fault :I erased system apps such as Facebook ,Youtube ...nothing very important .
I tried to start the procedure at the begining ,it doesn't work ...
Any idea from anyone ?
Thanks .
fleafred said:
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
Click to expand...
Click to collapse
How are you fleafred, https://samfrew.com/es/model/SM-A515F/ here you will find the original rom. I did the procedure again and had no more problems.
Cool ,I couldn't find it!
Just have to wait for 9h now ...
Thanks a lot ,abraxasboot ,I'll tell u.
Have a nice day .
It worked !
Ouf !Thanks a lot ...
I could re-install Magisk ,Xposed ...
I'd have like to know what I desinstalled to do that ...
Have a nice day .
Thank you very much, brother. You did the perfect way
== important ==
I was unable to flash and reboot into TWRP recovery after applying the official Samsung update from March, which updates Android from 10 to 11. Reboot into recovery would not work and I would always end in a boot loop.
I had to downgrade to Samsung's official Android 10 and used the binaries from January for that: https://samfrew.com/es/model/SM-A515F
After that, flashed TWRP again and was able to boot into recovery right away as it should be
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
hey guys i used a lyf wind 1 to flash lineage os using twrp ..... so i wiped the previous os and unknowingly flashed another unsupported version of twrp ...when entering to recovery menu its all blank .... now i have no os and recovery ...... i couldnt flash stock rom because my device is not recognised as qualcomm port .............
pls any help ????
I have a working 11R twrp and all the DRM passers mejestics etc. to run.. you can boot the os after that that is the standard Samsung OS. np u can install LINAGE os 18.1 Andys march release, the Mejestics meaning u can patch root without Needing to part the orignal Firm and copy boot.img over. etc
Here is Link With GSI as Well and 2.5 GUI Twrp working and UI3.0
Google Drive: Sign-in
antuanix46 said:
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
Click to expand...
Click to collapse
All good in the end, I needed to install samsung's firmware in odin first
Thank you for the good work
I am not responsible for any damage to your device, when you root you lose the Warranty
This guide collects A107F development info, but with the files ported to the A107M.
Thanks to the Galaxy A10s Development team for the original files.
You need to be on Android 10, if you are on android 11, there are tutorials to downgrade.
[BootLoader Unlock]
- Backup all your media, this process will delete your internal media including music and photos
- Go to developer settings and enable [OEM Unlock]
- Reboot to download mode (Turn off, press VOL- & VOL+ and connect the USB)
- When prompted, press and hold VOL + to enter bootloader unlock mode
- Press VOL + to confirm you want to unlock bootloader, this will wipe your data
- If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
- Go through the initial setup. Skip through all the steps since data will be wiped again later when we flash TWRP and magisk
- Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader. This step is MANDATORY
- Perfect! Your bootloader now accepts unofficial images in download mode.
[Twrp Install]
At this point, you will need to install Odin on your PC.
Bootloader unlocked is OBLIGATORY.
On your MicroSD, put the "A10s-encryption-disabler.zip" file.
Boot to download mode, load "VBMeta" file in AP and "TWRP Ported to A107M" file in BL
- Disable [Auto Reboot] in Odin
- Flash
- Force a reboot by pressing VOL+, VOL - and POWER buttons at the same time
- With the USB connected, and after the screen goes black, IMMEDIATELY let go of all buttons and IMMEDIATELY press and hold VOL+ and POWER button at the same time to boot to TWRP Recovery
NOTE: TWRP on this phone is not perfect, after booting to it, the screen will remain black after the Samsung logo disappears, simply wait 10 seconds and press the power button 2 times to have acces to it.
- After booting to TWRP successfully, go to WIPE in TWRP
- At the bottom, you should see an option to FORMAT DATA. After you select it, you will be asked to type "yes" in your keyboard. If you do not see this, you probably selected the wrong option.
- After formatting data, flash the "A10s-encryption-disabler.zip" with TWRP. This is done to avoid future bootloops.
- Optional, flash "Magisk.zip" if you want to keep on Stock ROM with root.
- After doing this, boot back to system and you are done
- Wait patiently for the device to boot for the first time
[Custom ROMs Install]
Bootloader unlocked and TWRP isntalled are OBLIGATORY.
Most of the GSI ROMs of this forum works fine on this device.
Only download a64 ROMs, do not confuse with ARM64.
On your MicroSD, put the ROM image.
- Boot to TWRP
- Go to Wipe > Advanced
- Wipe ONLY the System partition
- Go to Install
- At the bottom, select option "Install Image"
- Search for your GSI. It should be something that ends in .img. If it ends in .xz instead, you need to extract the image first
- Optional, if you want Root, flash the "Magisk.zip" file
- Go to recovery main menu
- Go to Reboot
- Reboot to Recovery
- After that, go to Wipe and perform a Factory Reset
- Reboot to System and enjoy!
[Downloads]
>Everything you will need<
I had a problem in Odin an "RQT-CLOSE" error occurred
Lukas203 said:
I had a problem in Odin an "RQT-CLOSE" error occurred
Click to expand...
Click to collapse
I GOT THE SAME THING WHATS HAPPENNING?
Worked perfectly on a107m with binary 6
Alexander_SlowD said:
Worked perfectly on a107m with binary 6
Click to expand...
Click to collapse
If it worked for you, what procedure did you follow? What rom did you use for bit 6? what tools did you use?
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Luciannus said:
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Click to expand...
Click to collapse
The TWRP is slready working for me , now I trying the Magisk part , I did this on Android 11 binary 6 trough A107MUBS6CWA3_ZTO firmware ...