Locked bootloader - Razer Phone Questions & Answers

Hey so I have a razer phone and I am stuck in the bootloader "download" mode Oem Unlock is disabled and cant enable because I am in a boot loop and I can't install stock because I can't unlock bootloader. Can anyone help me?

did you ever fix
have the same problem right now any help would be appreciated

does fastboot recognize the device?

same problem
Hi, I have the exact same problem,
fastboot is working, but cannot unlock
Code:
fastboot oem device-info
(bootloader) Verity mode: true
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
OKAY [ 0.008s]
Finished. Total time: 0.009s
Code:
fastboot flashing unlock
FAILED (remote: 'Flashing Unlock is not allowed
')
Finished. Total time: 0.004s
I cannot go into the android system, screen stay black, I need to wait for the battery to run out to test again from powered off phone (if I boot normally)
any help ?

Related

Bricked device: Cannot unlock, flash, boot, unable to mount partition, missing table

I had lollipop running without real issues for a while. After a complete battery drain, I put it on the charger. Upon trying to turn the device on, it hung on the Google screen showing an unlocked padlock at the bottom.
I tried to see how far I could go, and can boot into fastboot but no further.
I thought I would start the usual flashing process from the start by bringing it back to stock and then back to root. Initially the device was unlocked. I locked it with "fastboot oem lock" the rebooted to bootloader. Now when I run "fastboot oem unlock", the unit freezes up when I select Yes to confirm unlocking the bootloader.
Code:
C:\Android>fastboot oem unlock
...
(bootloader) Unlocking bootloader...
(bootloader) erasing userdata...
FAILED (status read failed (Too many links))
finished. total time: 898.264s
Previously, before I locked it, when I tried to flash recovery & bootloader, I received "FAILED (remote: flash write failure)" and "fastboot FAILED (remote: Partition table doesn't exist)" errors. Now, I cannot try to reflash because I can't get unlocked ("FAILED (remote: Bootloader is locked.)")
Current status:
Code:
C:\Android>fastboot-toolkit oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) SB=Y
OKAY [ 0.016s]
finished. total time: 0.016s
integramodder said:
I had lollipop running without real issues for a while. After a complete battery drain, I put it on the charger. Upon trying to turn the device on, it hung on the Google screen showing an unlocked padlock at the bottom.
I tried to see how far I could go, and can boot into fastboot but no further.
I thought I would start the usual flashing process from the start by bringing it back to stock and then back to root. Initially the device was unlocked. I locked it with "fastboot oem lock" the rebooted to bootloader. Now when I run "fastboot oem unlock", the unit freezes up when I select Yes to confirm unlocking the bootloader.
Code:
C:\Android>fastboot oem unlock
...
(bootloader) Unlocking bootloader...
(bootloader) erasing userdata...
FAILED (status read failed (Too many links))
finished. total time: 898.264s
Previously, before I locked it, when I tried to flash recovery & bootloader, I received "FAILED (remote: flash write failure)" and "fastboot FAILED (remote: Partition table doesn't exist)" errors. Now, I cannot try to reflash because I can't get unlocked ("FAILED (remote: Bootloader is locked.)")
Current status:
Code:
C:\Android>fastboot-toolkit oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) SB=Y
OKAY [ 0.016s]
finished. total time: 0.016s
Click to expand...
Click to collapse
Same exact thing happened to mine last week. I've followed the exact same steps as you with no luck..Maybe some has recovered from this?????
zerocool00 said:
Same exact thing happened to mine last week. I've followed the exact same steps as you with no luck..Maybe some has recovered from this?????
Click to expand...
Click to collapse
So was this a Google OTA update that caused this?
integramodder said:
So was this a Google OTA update that caused this?
Click to expand...
Click to collapse
Anyone else have any suggestions?

Restoring to stock *LOCKED*

ok i have tried searching but im a bit dumbfounded i restored my phone back to stock via a ruu , then i set s-on back via command fastboot oem writesecureflag 3 now i need to set it back to locked , would really appreciated being pointed in right direction if possible please ?
** edit tried C:\Android\com>htc_fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.021s
htc_fastboot finished. total time: 0.179s
C:\Android\com>
C:\Android\com>fastboot oem lock
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.015s]
finished. total time: 0.016s
C:\Android\com>
tonnytech said:
ok i have tried searching but im a bit dumbfounded i restored my phone back to stock via a ruu , then i set s-on back via command fastboot oem writesecureflag 3 now i need to set it back to locked , would really appreciated being pointed in right direction if possible please ?
** edit tried C:\Android\com>htc_fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.021s
htc_fastboot finished. total time: 0.179s
C:\Android\com>
C:\Android\com>fastboot oem lock
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.015s]
finished. total time: 0.016s
C:\Android\com>
Click to expand...
Click to collapse
Use SunShine again and choose S-OFF/Locked. Afterwards go S-ON again, just like you did before.
You need to have flashed an RUU intended for your original model, not just stock.
errikosd said:
Use SunShine again and choose S-OFF/Locked. Afterwards go S-ON again, just like you did before.
You need to have flashed an RUU intended for your original model, not just stock.
Click to expand...
Click to collapse
thanks for the reply i sorted it as you suggested already appreciate reply thou

Unlocking bootloader for LEX727

Hi All.
I just bought the leeco pro 3 and want to unlock the bootloader. I followed the steps outlined in "X727 (US Model) Persistent bootloader unlock from 5.8.019s". I turned on USB debugging, permanently added USB device, and turned on the "allow oem unlocking option". Then, i rebooted to fast boot and tried the following commands and received an error.
Code:
:~$[B] fastboot oem device-info[/B]
...
(bootloader) Device product name: [le_zl1_oversea]
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
(bootloader) Serial console enabled: false
(bootloader) Serial hw output enabled: false
(bootloader) Display panel:
OKAY [ 0.083s]
finished. total time: 0.083s
:~$ [B]fastboot oem unlock-go[/B]
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.008s
:~$ [B]fastboot oem unlock[/B]
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.004s
[email protected]:~$ fastboot reboot
rebooting...
finished. total time: 0.007s
My phone came with 5.8.020S (I think) and I tried the above steps with that version. Then i updated to 5.8.021S and tried again and received the same issue. I checked for more updates but none were found.
I am sure this issue has been solved somewhere but I just want to make sure I do not brick this device. Please help.
Developer Options ---> usb debug ---> open ..
Developer Options ---> Oem unlock ---> open ..
Have you enabled them?
lazye53 said:
Developer Options ---> usb debug ---> open ..
Developer Options ---> Oem unlock ---> open ..
Have you enabled them?
Click to expand...
Click to collapse
Thanks for the reply.. Yes. Both of those options are on. I have tried multiple times to turn them off and on and redo the unlock at fast boot, but i get the same error
sagarc88 said:
Hi All.
I just bought the leeco pro 3 and want to unlock the bootloader. I followed the steps outlined in "X727 (US Model) Persistent bootloader unlock from 5.8.019s". I turned on USB debugging, permanently added USB device, and turned on the "allow oem unlocking option". Then, i rebooted to fast boot and tried the following commands and received an error.
Code:
:~$[B] fastboot oem device-info[/B]
...
(bootloader) Device product name: [le_zl1_oversea]
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
(bootloader) Serial console enabled: false
(bootloader) Serial hw output enabled: false
(bootloader) Display panel:
OKAY [ 0.083s]
finished. total time: 0.083s
:~$ [B]fastboot oem unlock-go[/B]
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.008s
:~$ [B]fastboot oem unlock[/B]
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.004s
[email protected]:~$ fastboot reboot
rebooting...
finished. total time: 0.007s
My phone came with 5.8.020S (I think) and I tried the above steps with that version. Then i updated to 5.8.021S and tried again and received the same issue. I checked for more updates but none were found.
I am sure this issue has been solved somewhere but I just want to make sure I do not brick this device. Please help.
Click to expand...
Click to collapse
For 5.8.021S, go to page 26 ....
sagarc88 said:
Thanks for the reply.. Yes. Both of those options are on. I have tried multiple times to turn them off and on and redo the unlock at fast boot, but i get the same error
Click to expand...
Click to collapse
I had this issue also this I solved it.
Undo the OEM allow to unlock reboot then enable OEM to unlock bootloader.
Still had the problem.
I ended up flash the bootloader then then ran the bootloader unlock commander and it worked.
Sent from my LEX727 using xda premium
mchlbenner said:
I had this issue also this I solved it.
Undo the OEM allow to unlock reboot then enable OEM to unlock bootloader.
Still had the problem.
I ended up flash the bootloader then then ran the bootloader unlock commander and it worked.
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
You need to flash 2 files via adb first, then run the unlock command.
I did it successfully for 021s
Sent from my LEX727 using Tapatalk
kukuteku said:
For 5.8.021S, go to page 26 ....
Click to expand...
Click to collapse
This worked perfectly!! Thank you very much.
Flashing Critical Locked
I'm just a dabbler in this stuff, but I think I understand everything required to get LineageOS on my LEX727. The problem is, in the process of learning, I think I locked the ability to flash aboot, and now I can't get the twrp recovery onto my phone. Does anyone have any ideas or know what to do? If I can do anything from here?
Thanks for any help!
MAHawbs said:
I'm just a dabbler in this stuff, but I think I understand everything required to get LineageOS on my LEX727. The problem is, in the process of learning, I think I locked the ability to flash aboot, and now I can't get the twrp recovery onto my phone. Does anyone have any ideas or know what to do? If I can do anything from here?
Thanks for any help!
Click to expand...
Click to collapse
What did locked ability flash abootd it d relock bootloader.
What did you ?
Sent from my SM-A730F using xda premium

fastboot unlock_critical derp

If I remember correctly, on the P2XL, we were able to do both unlock and unlock_critical from fastboot. And them lock them both separately. However, since the last two clean flashes for me, I'm unable to lock or unlock both the partitions. I can only unlock or lock either one of them. When I try to do the other, it fails stating that the device is already unlocked! Another thing I noticed is that when I run sudo fastboot oem device-info, I get the below:
Code:
(bootloader) Verity mode: true
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: true
OKAY [ 0.000s]
Finished. Total time: 0.000s
If you notice,
Code:
(bootloader) Device critical unlocked: false/true
is completely missing!
Due to this, my device remains uncertified and always fails safety net.
Any idea how to fix this?

Mi 9 se boot issue

Hello,
I didn't do anything to have this issue, the phone simply restart it self overnight and won't boot.
USB debugging is OFF
PS C:\adb> fastboot oem device-info
< waiting for device >
...
(bootloader) Verity mode: true
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
OKAY [ 0.006s]
finished. total time: 0.007s
In the MI-Recovery 3.0
Wiping the data didn't change anything
Connect with MIAssitant the phone doesn't show even if in the device manager I can see it
No drive is accessible
No SD card
The model is M1903F2G
I'm lost here and don't know what to do, any advice will be appreciate!

Categories

Resources