Related
I was looking for such tool for quite some time ago...
After 1 year of searching, i gave up.
I finally got to built the file smyself :wink:
Just put these 2 files on your BA Windows folder, and make good use of it :twisted:
Niceeeeeeeeeee but i have the files already there...
any way we can add word to the t9 dictionary... also will the nokia t9 dictionary work on our ppc
PPC <-> T9
Well, i do apolagise for the apearent lack of interest of my previous post.
Given the fact i have been, unsuccessfuly, looking for such thing for so long i thaught maybe it vould be of interedt to the comunity.
Your answer/comment posts proven me wrong...
do you realy think so
the fact that there are not a huge base of portuguese writers in here doent mean thats not a valid thing
you helped at least one person .......yourself
well not everybody can say that so be glad and move foward and think
you did something for the us, using it or not its there.
i think all contribution are wellcome thats what makes this devices so great..
Thanks, also been looking for it for a long time. Great Work!
Great job. It does work... have tried another one, but this one is the ONE.
But just a question:
can be edit?
Means, can we put other words on it? If yes, how?
Guys that are old news...
All that stuff on...
http://www.portalppc.com ( dictionary for sms and word)
Hi,
It worked for me, but now I cannot copy back the original files, i backed up before doing the mod.
Active Sync complains that the files are already in use... What now?
Thanks,
vma
to reinstall the old files , it's simple .
just go to /windows in file explorer of ppc , and delete the files you have copied to make the change .
after soft reset , windows will automatically recreate the originally files
I am not able to delete or overwrite the files - that's the problem!
What I don't understand is, that I could replace the original files and now the ones I copied seem to be constantly in use, even after a soft reset.
I don't want to do a hard reset.
Cheers,
vma
with resco explorer , i can delete these files if they not originally ....
after soft reset , windows 2003 (or se) use the originally files
using Resco Explorer:
"Action Failed
Cannot delete file 'dictprob.dat'. The process cannot access the file because another process has locked a portion of the file.
Press 'Yes' to continue."
Cheers,
vma
Try to use SafeMode to boot your ppc in safe mode and delete the files :/
Dicionario T9 Portugues Compilado em ficheiro cab
Compilei os ficheiros num instalador .cab eu também tinha esses problemas de falta de permissão de instalação dos ficheiros e assim já é possivel sem nenhma complicação
espero k vos seja util
cumprimentos,
ViperRunner
ViperRunner said:
Compilei os ficheiros num instalador .cab eu também tinha esses problemas de falta de permissão de instalação dos ficheiros e assim já é possivel sem nenhma complicação
espero k vos seja util
cumprimentos,
ViperRunner
Click to expand...
Click to collapse
Tried to install it on my htc touch 3g, but nothing happens.... help?
Has anyone tried to install this update? Will it break root?
I heard the 7” equivalent is still rootable, and you can always downgrade it if you couldn't root it. In short any update breaks root, but you just reroot it afterwards. It also gets rid of custom launchers and I think the vending.apk in the system partition.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
I heard the 7” equivalent is still rootable, and you can always downgrade it if you couldn't root it. In short any update breaks root, but you just reroot it afterwards. It also gets rid of custom launchers and I think the vending.apk in the system partition.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
Just updated it this morning. It breaks the root, but you can reroot it with usual method.
ndv92 said:
Just updated it this morning. It breaks the root, but you can reroot it with usual method.
Click to expand...
Click to collapse
i reroot my kindle but my wallpaper is black... i cant set my own wallpaper
royfig said:
i reroot my kindle but my wallpaper is black... i cant set my own wallpaper
Click to expand...
Click to collapse
That has been a problem for quite a while, use the wallpaper fix in my signature to fix it. If you have a problem getting it to work or your status bar starts screwing up just post on that thread and i'll see if i can help you.
hi! i used wallpaper fix before the update, but now i cant. says file not found framework.res
royfig said:
hi! i used wallpaper fix before the update, but now i cant. says file not found framework.res
Click to expand...
Click to collapse
um well that's just odd, i mean if it has root access still it shouldn't be saying that, its not like they can just remove the framework-res.apk from the os out of nowhere. Try running it again and if it still does it again, then use the debugger to post a log, read the instructions for the debugger or you will probably think its broken.
stunts513 said:
um well that's just odd, i mean if it has root access still it shouldn't be saying that, its not like they can just remove the framework-res.apk from the os out of nowhere. Try running it again and if it still does it again, then use the debugger to post a log, read the instructions for the debugger or you will probably think its broken.[/QUOT
this is the debuggerlog.txt
Cleaning Up...
No se pudo encontrar E:\Kindle\Stunts_Wallpaper_Fix_v2.1\Stunts Wallpaper Fix\framework-res.apk
No se pudo encontrar E:\Kindle\Stunts_Wallpaper_Fix_v2.1\Stunts Wallpaper Fix\newframework-res.apk
No se pudo encontrar E:\Kindle\Stunts_Wallpaper_Fix_v2.1\Stunts Wallpaper Fix\resources.arsc
El sistema no puede encontrar el archivo especificado.
this is a print screen
No se pudo encontrar E:\Kindle\Stunts_Wallpaper_Fix_v2.1\Stunts Wallpaper Fix\fr
amework-res.apk.orig
Doing prelim checks...
***********************************************
* Your system partition is too low on disk *
* space to complete the procedure, please *
* delete your alternate launchers, widget *
* picker, and live wallpaper chooser if *
* installed and try again. *
***********************************************
rm: can't remove '/data/local/framework-res.apk.orig': No such file or directory
rm: can't remove '/system/framework/framework-res.tmp': No such file or director
y
Presione una tecla para continuar . . .
Click to expand...
Click to collapse
royfig said:
stunts513 said:
um well that's just odd, i mean if it has root access still it shouldn't be saying that, its not like they can just remove the framework-res.apk from the os out of nowhere. Try running it again and if it still does it again, then use the debugger to post a log, read the instructions for the debugger or you will probably think its broken.[/QUOT
this is the debuggerlog.txt
Cleaning Up...
No se pudo encontrar E:\Kindle\Stunts_Wallpaper_Fix_v2.1\Stunts Wallpaper Fix\framework-res.apk
No se pudo encontrar E:\Kindle\Stunts_Wallpaper_Fix_v2.1\Stunts Wallpaper Fix\newframework-res.apk
No se pudo encontrar E:\Kindle\Stunts_Wallpaper_Fix_v2.1\Stunts Wallpaper Fix\resources.arsc
El sistema no puede encontrar el archivo especificado.
this is a print screen
No se pudo encontrar E:\Kindle\Stunts_Wallpaper_Fix_v2.1\Stunts Wallpaper Fix\fr
amework-res.apk.orig
Doing prelim checks...
***********************************************
* Your system partition is too low on disk *
* space to complete the procedure, please *
* delete your alternate launchers, widget *
* picker, and live wallpaper chooser if *
* installed and try again. *
***********************************************
rm: can't remove '/data/local/framework-res.apk.orig': No such file or directory
rm: can't remove '/system/framework/framework-res.tmp': No such file or director
y
Presione una tecla para continuar . . .
Click to expand...
Click to collapse
That mean you don't have enough space left on the system partition, if you installed any apps to the system folder then get rid of them, that should free up the needed space, if not then you can always restore a stock image with kffa and try again. I haven't updated my wallpaper fix in quite a while... Need to finish that update i have put off for a few months at some point. Also just made me think as long apps use an internal name i could autodetect launchers and remove them temporarily or something like that. Seems kinda complicated to do, have to make a very annoying if statement. Anyways enough of my rambling.
Click to expand...
Click to collapse
THIS TOOLS WORK ON LENOVO K910 DUAL SIM WITH ANDROID 4.4.x VERSION IF YOU FOUND THAT WORK ON OTHERS LET ME KNOWIF YOU HAVE ANY OTHER K910 REATHER THAN THIS IT'S YOUR RESPONSABILITY IF SOMETHING GOES WRONG!
Here are a few tools that could be very usefull that i've found here and there.
Please, feel free to link what you think that could be usefull and try to keep it in just one place for easy access. :good:
Root Your Lenovo K910 - Easy way to get rooted
Download THIS file
Connect your phone to PC through USB cable
Turn USB debugging ON
Run the file you just downloaded
Unlock you 4.4.x bootloader
Go to this thread and follow instructions from there.
Install TWRP Easy & Clean - Simple but effective way to install TWRP with just one click
Download THIS file
Connect your phone to PC through USB cable
Turn USB debugging ON
Run the file you just downloaded
Philz Touch CWM
Download Philz Touch
Copy Philz Touch Recovery to SDCARD
Reboot on your current recovery
Install the file you've copied
TWRP v2.7.1.5 - from master lie at 4pdu
Screenshots
Download TWRP v7.3.1.5
Copy TWRP v7.3.1.5 to SDCARD
Reboot on your current recovery
Install the file you've copied
TWRP v2.8.1.0
Here you can find the last TWRP available along with 6 themes.
important - This recovery isn't compatiblem with backups from other versions. To use it properly make a maback with this version after installation.
Copy the chosen theme to SDCARD
Reboot on your current recovery
Install the file you've copied
Latest K910 Roms
Here you'll find the latest version for our K910. At this moment VIBEUI_V2.0_1441_7.2.1_DEV_K910 it's the latest
All tools above work with this version
Question: What are the differencies between K910 and K910e?
Answer: Lenovo K910e VIBE Z, this is a little different from Lenovo K910 VIBE Z, because it's certified by Chinese Authorities in China. It's CDMA version. Therefore, the design and specs are almost similar to those of Lenovo Vibe Z K910. This smartphone (K910e) supports 3G:CDMA EVDO 800/1900MHz, and Lenovo VIBE Z K910 supports the all bands like 3G: WCDMA 850/900/1700/1900/2100MHz
Changelog 1441
[System]
Optimization into the dial pad and address book slow response
[Music Store]
First entered the music repair shop
Click installed the necessary permissions will not jump to the top of the page after page management fixes from multitasking
Press music store appeared flash back
[eggplant]
Fast pass new Customizable avatars, can and Apple, PC connection
[Music Cloud Notebook]
Repair notes classified in the input box click on the icon and press return to enter the upper left corner of the keyboard is not hidden
Repair music search cloud memo notes the contents of overlap with the date and time
[Cloud Services]
Repair recover data from SD card appear unresponsive cloud services
[Game Center]
Optimize the use Back button to exit the game center, not the background permanent memory into the game after the acceleration will pop up Game Center game download page to download the game to complete the repair stop running
Install Google Play - Recovery
Download GApps_4.4.2.zip and install it through recovery
Install Google Play - GMS TOOLS
Download GMS Tool and install it
Go to GMS Tool > Install Recommend > Install the 3 Packages
Reboot
Unlock Lenovo Weather Cities - This will unlock cities worldwide
Download and install xPosed
Download and install vibexpert
Open xPosed > Framework > Install / Update
Reboot
Open vibexpert > UI > Worldwide Weather App
Make any other change you want on the app
Reboot
Tools to Recover a Bricked Phone - Make sure you know what you're doing!
QPST - Qualcomm aplication to recover your phone
Drivers - Drivers needed to use QPST [If your PC doesn't recognize your phone, make sure you install according to your OS]
Lenovo Drivers - Drivers used to connect Phone-PC
HTC Mania guide from corion :good: - A guide with explain step by step how to use the above files
corion said:
Bien, primero de todo me gustaría dar las gracias a seergio por darme un rayito de esperanza. Él fue quien me comentó la existencia de la herramienta QPST (Qualcomm Product Support Tool). También a Stack de http://lefenbbs.lenovo.com/, a oscarxvita de http://forums.wpcentral.com/ y a otros tantos que no recuerdo, porque tras leerme sus tutoriales, tras tener un batiburrillo de ideas y muchas pruebas, he conseguido que mi K910 vuelva a la vida.
Decir que mi móvil estaba totalmente brickeado, no encendía, no arrancaba en recovery, ni en bootloader, ni cargaba.
======= PREPARACIÓN ==================
Para traer de vuelta a la vida a nuestro querido móvil vamos a utilizar la herramienta QPST (Qualcomm Product Support Tool). QPST es un conjunto de herramientas de Windows diseñado para interactuar, controlar, y testear teléfonos CDMA que lleven Qualcomm ASICs.
La herramienta QPST la podemos descargar de aquí
También necesitaremos este 7z para el flashearlo. Descargar aquí
======= COMENCEMOS ==================
Primero de todo es iniciar Windows con la opción de "Deshabilitar la comprobación de firmas de controladores digitales". Para ello cuanto iniciemos el sistema pulsamos F8 hasta que nos salga el menú de arranque de Windows, una vez dentro seleccionamos la opción que he dicho anteriormente.
Una vez iniciado Windows lo que debemos hacer es instalar la herramienta QPST, junto con QPST se instalarán los drivers de Qualcomm.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Como vemos, se nos habrán instalado varias herramientas. Nosotros para lo que nos traemos entre manos solo usaremos las dos que están en un recuadro rojo. eMMC Software Download y QPST Configuration.
El siguiente paso es conectar el móvil. Para que podamos trabajar con él es necesario que se conecte en modo download, para ello, pulsamos la tecla de volumen - y lo conectamos al pc. En el caso de que en el teléfono no se encienda el LED azul y el pc no detecte ningún dispositivo, hay que quitarle la batería y conectarlo sin ella. Aquí tenemos un vídeo de como quitar la tapa trasera.
Cuando conectemos el teléfono, si tenemos correctamente instalados los drivers de Qualcomm, nos debería de aparecer un nuevo dispositivo tal que así:
Si nos sale un dispositivo con un signo de admiración y llamado QHSUSB_DLOAD o QHSUSB_BULK, entonces debemos de indicarle a Windows que drivers instalar. Para ello ya sabéis, botón derecho sobre el dispositivo, Actualizar software del controlador --> Buscar software de controlador en el equipo, y le indicamos que busque dentro de la carpeta drivers, que está dentro de la carpeta QPST_K910, donde estaba el instalador del programa.
El siguiente paso es descomprimir el archivo 7z.
Cuando lo hayamos descomprimido, recomiendo cortar todo lo que hay dentro, crear una carpeta llamada bin en la raíz de alguno de nuestros discos duros, y pegar todo allí.
Seguidamente buscamos un archivo llamado flash_local.xml y lo abrimos para su edición.
La ruta que está señalada debemos de modificarla y poner la ruta donde tengamos los archivos que hemos descomprimido del arhcivo 7z. Por eso decía de ponerlo dentro de una carpeta llamada bin, en la raíz del disco duro, para que solo haya que cambiar la letra de la unidad. Bueno, pues una vez cambiada la ruta guardamos y cerramos.
Ahora toca trabajar con QPST . (Siempre que ejecutemos alguna de sus herramientas, lo debemos hacer con permisos de administrador).
1.- Ejecutamos QPST Configuration. Si todo ha ido bien nos debería de aparecer nuestro teléfono.
2.- Ejecutamos eMMC Software Download y hacemos lo siguiente:
Paso 1: En Sahara XML file, ponemos la ruta donde está el archivo XML que editamos anteriormente.
Paso 2: En el campo de Flash Programmer file name ponemos MPRG8974.mbn
Paso 3: En el campo de Boot Image ponemos 8974_msimage.mbn
Paso 4: Pulsamos en Load XML def... y seleccionamos el archivo rawprogram0.xml
Paso 5: Pulsamos en Load patch def... y seleccionamos el archivo patch0.xml
Paso 6: Desmarcamos la casilla Program MMC device
Paso 7: Pulsamos en Download y esperamos que acabe el proceso. Posiblemente, después del paso 7, nos saldrá uno o varios mensajes diciendo que se han detectado unos discos duros, que los formateemos para usarlos. DEBEMOS PULSAR EN CANCELAR.
Paso 8: Desmarcamos la casilla Programm Boot Loaders
Paso 9: Marcamos Program MMC device.
Paso 10: Seleccionamos nuestro teléfono de entre los dispositivos que aparezcan (los otros deben de ser el/los discos duros que tengamos).
Paso 11: Pulsamos en Download.
Cuando acabe el proceso desconectamos el móvil del ordenador, le metemos la batería e intentamos iniciarlo.
Espero que os sirva de ayuda.
Cualquier problema id posteando e intentaré ayudaros en lo que buenamente pueda.
Click to expand...
Click to collapse
Or you might prefer in English, Step-by-Step
Please don't fill this threat with thanks. A simple click and rate this thread will do :good:
Thank you
Crowds
XDA:DevDB Information
All Tools in One Place, Tool/Utility for the Android General
Contributors
Crowds, sash
Version Information
Status: Stable
Current Stable Version: 1
Created 2014-10-10
Last Updated 2014-10-10
XDA:DevDB Information
All Tools in One Place, Tool/Utility for the Android General
Contributors
Crowds, sash
Version Information
Status: Stable
Current Stable Version: 1
Created 2014-10-10
Last Updated 2014-11-07
Codes [UPDATE SET. 29th]
K910 Dual-SIM secret codes:
# # # # 1111 # : Engineer Mode (To test all hardware and sensors)
# # # # 537999 # : Developer Options (Full)
# # # # 0000 # : ROM Version
#### 3333 # or #### 8888 # : OffLineLog
####5236# : LCD display name
####2834# : Close ES325
####8899# : UMS Mode
Thanks @sash for those
####2222# show serial number
####5993# show software version
####7777# factory reset
####46361111# Network Info in Android 4.4
Apps You Can Freeze / Delete
I recomend a backup first in case you want something back
For obvious reasons i recomend freeze them first and only after you make sure everything works delete.
There are a few apps that despite they could be deleted without affectinf the system they afect others (i.e. browser makes some apps fail like play google).
Android Live Wallpaper
ANT Hal Service
Baidu IME
Basic Daydreams
Black Hole
Browser
Bubbles
Calendar
CarVoice
Downloads
Driving Apps
Face Unlock
File Browser
Game World
Google IME
Google Search
Google+
Hangouts
LASF SDK Lite
Le Wallpaper
Lenote
Lenovo Payment Service
Lenovo Service
Lenovo speech synthesis
Lenovo voice recognition
Lenovo Weather
Lenovo Weather Service
Lenovo Weather Theme
LenovoStore
Live Walpaper Picker
Magic Smoke Walpaper
Music
Music Visualisation
News & Weather
Phase Beam
Photo Screensavers
Players Tutorial
Print Spooler
Private Vault
Search
SecretCode
SECUREit
SHAREit
Street View
SYNCit
System Update
User Center
User Experience
Video
Voice
VoiceAssistant
Youyue
[Reserved for future use]
can i unroot the phone?
so that i can OTA update maybe? b ecause OTA update fails maybe because of root it is?
gimmeluck2 said:
can i unroot the phone?
so that i can OTA update maybe? b ecause OTA update fails maybe because of root it is?
Click to expand...
Click to collapse
You'll receive and be able to install OTA updates if the rom you're using is an "original" one.
If your rom was a developed one by someone you can't.
Doesn't have to do with the fact your phone is rooted or not.
I was able to do an OTA upgrade on my phone and it was rooted.
Anyway I think that RootGenious can unroot. Don't remember and I can't confirm atm.
Edit: witch version you have? Can you link it?
Crowds said:
You'll receive and be able to install OTA updates if the rom you're using is an "original" one.
If your rom was a developed one by someone you can't.
Doesn't have to do with the fact your phone is rooted or not.
I was able to do an OTA upgrade on my phone and it was rooted.
Anyway I think that RootGenious can unroot. Don't remember and I can't confirm atm.
Edit: witch version you have? Can you link it?
Click to expand...
Click to collapse
i have VIBEUI_V2.0_1435_7.2.1_ST_K910_WC3A official,
itcan see system update to
VIBEUI_V2.0_1437_7.44.1_ST_K910
it downloads it but
but it fails after restart. phone rooted and gapps flashed.
CAn it be because of the some chinesee system apps which i Uninstalled ( not freeze) by titanium pro?
gimmeluck2 said:
i have VIBEUI_V2.0_1435_7.2.1_ST_K910_WC3A official,
itcan see system update to
VIBEUI_V2.0_1437_7.44.1_ST_K910
it downloads it but
but it fails after restart. phone rooted and gapps flashed.
Can it be because of the some chinesee system apps which i Uninstalled ( not freeze) by titanium pro?
Click to expand...
Click to collapse
Don't believe that's chinese apps had any influence anyway, this time in order to have the latest rom follow this:
Install Rom from here [1437 is the latest atm for K910 witch is diferent of K910e]
Root your device [follow the steps from 1st post]
Install GMS Tools [follow the steps from 1st post]
Instal TWRP [follow the steps from 1st post]
1st freeze the apps you want and only then after confirm everything works at lest for 1 day you can delete the freezed apps.
note: Your problems with OTA updates may came from the deleted files
Good luck
Crowds
Crowds said:
K910 Dual-SIM secret codes:
# # # # 1111 # : Engineer Mode (To test all hardware and sensors)
# # # # 537999 # : Developer Options (Full)
# # # # 0000 # : ROM Version
#### 3333 # or #### 8888 # : OffLineLog
Click to expand...
Click to collapse
hello,
i have update my snapit camera(viberom_v1.0_1407) trough in app update. then i integrate update into rom by titanium backup. now camera cannot open even with other camera app.
i tried uninstall/reinstall apk but failed. then plan to try flash rom brought me to this thread and to this above post.
my phone fail camera test in engineer mode! will it possibly be ok after flash new rom? please help
adam_ridzuan said:
hello,
i have update my snapit camera(viberom_v1.0_1407) trough in app update. then i integrate update into rom by titanium backup. now camera cannot open even with other camera app.
i tried uninstall/reinstall apk but failed. then plan to try flash rom brought me to this thread and to this above post.
my phone fail camera test in engineer mode! will it possibly be ok after flash new rom? please help
Click to expand...
Click to collapse
That may be for 2 reasons as far as i am aware.
1. despite there's a new camere version (V.3.6.7) i might be incompatible with your version of VibeUI (is it 1.0_1407?!?! that's old)
2. Titanium Backup it's a great program but it's know for some years (at least 4) that some systenm apps may fail. Not sure if the programers had solved this in the last years since i've been out of xda for 2 years.
3. You may try to solve that this way:
Install any root explorer from market (i.e. Es File Explorer)
Go to settings > root > give permission > root again and in the pop up window choose RW for both
Go to system > app and rename SCG_arm_fhd_pro_sus.apk to SCG_arm_fhd_pro_sus.apk.bk
Make a copy of com-lenovo.sgc-1.apk to your sdcard (on data > app)
delete the file from data > app
Go to the file you just copied on sdcard and move it to system > app
Long press and choose permissions.
Check all the boxes available and reboot
See if this work if not an upgrade for the last VibeUI will do.
Hope it helps and you've understand :laugh:
Crowds said:
That may be for 2 reasons as far as i am aware.
1. despite there's a new camere version (V.3.6.7) i might be incompatible with your version of VibeUI (is it 1.0_1407?!?! that's old)
2. Titanium Backup it's a great program but it's know for some years (at least 4) that some systenm apps may fail. Not sure if the programers had solved this in the last years since i've been out of xda for 2 years.
3. You may try to solve that this way:
Install any root explorer from market (i.e. Es File Explorer)
Go to settings > root > give permission > root again and in the pop up window choose RW for both
Go to system > app and rename SCG_arm_fhd_pro_sus.apk to SCG_arm_fhd_pro_sus.apk.bk
Make a copy of com-lenovo.sgc-1.apk to your sdcard (on data > app)
delete the file from data > app
Go to the file you just copied on sdcard and move it to system > app
Long press and choose permissions.
Check all the boxes available and reboot
See if this work if not an upgrade for the last VibeUI will do.
Hope it helps and you've understand :laugh:
Click to expand...
Click to collapse
I understand, but the problem is, there is no com-lenovo and scg_arm. Any idea"?
adam_ridzuan said:
I understand, but the problem is, there is no com-lenovo and scg_arm. Any idea"?
Click to expand...
Click to collapse
You should have some scg file. tha't the one related with camera
Crowds said:
You should have some scg file. tha't the one related with camera
Click to expand...
Click to collapse
Then that will be the main problem I think. Proceed to flash latest rom. Tq very much
DEAD K910
Good day, please accept my apologies if this is posted in the wrong area of the forum. I have a Lenovo K910 dual SIMM unit from China. One of our employees (we sell these devices) was attempting to return the unit to factory default and has managed to completely destroy the unit. It will not show any display and will not vibrate when switched on. All that happens is the red LED will flash almost every second when plugged into a PC. The device will only show up as a fastboot device with the device listed as 'bf2b867 fastboot'. I have tried loading several different QPST drivers to try work with the QPST tools but to no avail.
Thanks for your time Any help would be most appreciated.
RASTAS12 said:
Good day, please accept my apologies if this is posted in the wrong area of the forum. I have a Lenovo K910 dual SIMM unit from China. One of our employees (we sell these devices) was attempting to return the unit to factory default and has managed to completely destroy the unit. It will not show any display and will not vibrate when switched on. All that happens is the red LED will flash almost every second when plugged into a PC. The device will only show up as a fastboot device with the device listed as 'bf2b867 fastboot'. I have tried loading several different QPST drivers to try work with the QPST tools but to no avail.
Thanks for your time Any help would be most appreciated.
Click to expand...
Click to collapse
Hi there
First of all don worry about posting here. You're at the right place.
OK, regarding your question, i can affirm by my own experience, that the phone isn't dead. I'ts almost but it isn't
Latter i will write a more detail step-by-step but for now i think this will do.
By your explanation, you must remove your battery and keep it that way. If you don't know how check this video. I had to do that
Read next post
1. It's better if you work on a complete clean PC. This was the only way i'be been able to recover mine after ONE MONTH!!! I use Win8.1 and just installed the updates from microsoft.
2. Download all the files posted on 1st post in the "Tools to Recover a Bricked Phone" section
3. Download QPST file from here. This is the original Lenovo files to restore
4. Install QPST and then rebbot with "Disable signature verification of digital controllers" checked
5. Open Device Manager
6. Connect your phone to PC through a USB cable pressing VOL-. I recommend that you use and old USB extension cable. We want this to slow down the information between phone and PC and COM port doesn't disapear in a blink of an eye.
--- If VOL- doesn't work try several combinations, like VOL+/USB cable or VOL-/VOL+/USB ---
7. By this time your PC began searching for the correct drivers. If everything went ok, device manager will see android phone as QHSUSB_DLOAD or QHSUSB_BULK
8. Install the drivers manually from the drivers folder you've just downloaded (Install accordly to your OS version)
9. Install Lenovo drivers
10. Reboot as in step 4
--- Now it's when the real work begin ---
11. Open Device Manager and QPST Configuration (as administrator) from the instaled folder
12. Connect your phone through USB extention cable again and check if Device manager are ok (Something like Qualcoom_something) and if QPST Configuration starts something. If so, you're good to go.
Now probably this is the part when you ask 700€ on your customer or send the phone back to repair
This is a trial and error work. COM port will only be visible for a breef momment. The time you pressed ENTER key is the real key to manage go further
Make sure that flash_local.xml had the right path, like:
Step 1: Sahara XML file, put the path where the XML file is edited above.
Step 2: In the field of Flash Programmer put MPRG8974.mbn
Step 3: In the field Boot Image put 8974_msimage.mbn
Step 4: Then hit def XML Load and select the file rawprogram0.xml
Step 5: Then hit def patch Load and select the file patch0.xml
Step 6: Program uncheck the box MMC device
Step 7: Then hit Download and hope to finish the process. Possibly, after step 7, we will get one or more messages saying that some hard drives have been detected, the formateemos to use. MUST CLICK CANCEL.
Step 8: Uncheck the box Boot Loaders Programm
Step 9: Mark Program MMC device.
Step 10: Select your phone from the devices that appear (the other must be / have hard drives).
Step 11: Then hit Download.
When the process ended, Insert the battery and try to start it but keep the phone connected to PC this is important because your battery is completely dead atm.
I hope this will help you.
Like i said i've been one month without my phone but after i decided to format all my driver and install Win from scratch this will only take me half an hour till i get the DW mode.
Good luck:good:
Chears
Crowds
RASTAS12 said:
Good day, please accept my apologies if this is posted in the wrong area of the forum. I have a Lenovo K910 dual SIMM unit from China. One of our employees (we sell these devices) was attempting to return the unit to factory default and has managed to completely destroy the unit. It will not show any display and will not vibrate when switched on. All that happens is the red LED will flash almost every second when plugged into a PC. The device will only show up as a fastboot device with the device listed as 'bf2b867 fastboot'. I have tried loading several different QPST drivers to try work with the QPST tools but to no avail.
Thanks for your time Any help would be most appreciated.
Click to expand...
Click to collapse
Here you can follow my Step-by-Step Tutorial.
This is a long and exhaustive one but i think it will cover all possible aspects.
In your case specifically you need to follow the instructions on post #6 before applying what's written on post #5
Read carefully or you have 2 more possibilities.
Return phone to the owner and give him my link
Sent the phone back to china and ask to your customer big, big money
:laugh::laugh::laugh:
C hears
Crowds
Crowds said:
Here you can follow my Step-by-Step Tutorial.
This is a long and exhaustive one but i think it will cover all possible aspects.
In your case specifically you need to follow the instructions on post #6 before applying what's written on post #5
Read carefully or you have 2 more possibilities.
Return phone to the owner and give him my link
Sent the phone back to china and ask to your customer big, big money
:laugh::laugh::laugh:
C hears
Crowds
Click to expand...
Click to collapse
Crowds you are a champion. I have just arrived at work and will now start as per your instructions. I can not thank you enough for the time you have put into this. I will revert when done and let you know how things pan out. Once again huge thanks for your time.
Crowds said:
Latest K910 Roms
Here & Here you'll find the latest version for our K910. At this moment VIBEUI_V2.0_1437_ST_K910 it's the latest [I said K910 not K910e]
All tools above work with this version
Question: What are the differencies between K910 and K910e?
Answer: Lenovo K910e VIBE Z, this is a little different from Lenovo K910 VIBE Z, because it's certified by Chinese Authorities in China. It's CDMA version. Therefore, the design and specs are almost similar to those of Lenovo Vibe Z K910. This smartphone (K910e) supports 3G:CDMA EVDO 800/1900MHz, and Lenovo VIBE Z K910 supports the all bands like 3G: WCDMA 850/900/1700/1900/2100MHz
Changelog
[Recommend]
New Bubble lock screen
New fantasy lock screen
Prompt notification of new fully charged
Talking Alarm Clock humane optimization improvements
The new interface optimized video and operating experience
[System]
New integrated andorid new boot animation pictures
After the new OTA upgrade was successful, increasing switching Huan Jing and bubble lock screen theme guide
[Video]
Optimize the new interface and operating experience
[Clock]
New data update holidays to get data from the clock yourself, holidays can support up to 4.2 system
Add a timer to remind expression interface adjustment and optimization of terms
New World clock search areas of the city, you need to have fuzzy search capabilities, including Pinyin, English, letters, characters
Press the home button automatically suspended new, user-friendly alarm pause
New calls during alerts
New animation timer guide
Talking Alarm Clock humane optimization improvements
[Notification Center]
Prompt notification of new fully charged
Multi-task optimization and optimization of layout adjustment, screenshots large view more user-friendly operation and use
Optimization Memory Optimization
Repair certain application multitasking interface is black thumbnails
[Lenovo lock screen]
New Bubble lock screen
New fantasy lock screen
New digital lock digital position random option
Added option to simplify operator information
Optimization of anti inadvertently specification improvements, the situation did not reduce the protection of lives
[Lenovo Services Framework]
Optimization optimized interface, maintain and vibe2.0 style consistency; code optimization to improve performance
Crowds
Click to expand...
Click to collapse
Kindly, Explain how to install the latest ROM. I just bought Vibe Z k910 and I need to update its rom from vibeui v1.5 to v2.0.
Are there other tools should I use to update the rom?
Thanks
agsao said:
Kindly, Explain how to install the latest ROM. I just bought Vibe Z k910 and I need to update its rom from vibeui v1.5 to v2.0.
Are there other tools should I use to update the rom?
Thanks
Click to expand...
Click to collapse
Download last rom and copy to sdcard
see if you have twrp installed if not dw from 1st post and follow instructions
then enter in twrp by rebooting and keep pressed 2 vol buttons till lenovo logo appear
install from there
Thanks for your cooperation, but excuse me I am new with android could you check the following steps if these are ok or there is something missing:
1. I rooted my phone with RootGenius
2. I installed TWRP and I checked it works well
3. I downloaded the latest ROM VibeUi_V2.0_1437_K910 as my phone version K910
4. I should placed the new rom in my "internal memory" on root --- I've no external SD slot ---
5. I should enter TWRP by rebooting phone and keeping 2 volume buttons pressed.
6. Should I backup something ????
7. On TWRP Wipe >> Swipe to factory reset
8. On TWRP Install >> Select the new ROM from the internal memory ????
9. On TWRP Wipe >> Advanced Wipe >> select Cache & Dalvik Cache >> Swipe to Wipe
10. Reboot
11. Install GMS Tools then Google Play
==> I don't know is the new software rooted or not? Can I delete Chinese app without rooting?
==> What is the need of "Tools to Recover a Bricked Phone" as shown in above instruction?
sorry for long questions and sorry for my language "from Egypt"
but I have to make sure that I'll follow the right steps first.
Thanks alot
COSP
Code:
**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****
Welcome to COSP, your new future Android Operating System.
Our goal is to have an Pixel-like android ROM that isn't spying on you and uses as few system space as possible. Also, we provide the option to go completely without GApps using MicroG support.
Why us?
We are focusing on stability and performance, having an debloated ROM is essential for that. Also, we want Users to decide what kind of Store they want to use, either F-Droid or the Play Store.
Also, we take User requests serious. To suggest something, contact us on telegram.
Features:
1) All systemUI tuning elements
2) An handy Network indicator
3) Charging Information
4) Lawnchair and Quickstep as default
5) Quick Settings mods
6) Signature spoofing
7) OP gestures
8) Navbar tuner
9) Rootless Substratum (with fixes to theme system correctly)
10) Screenshot/screenrecord tile
11) Advanced power menu
12) Double tap to sleep on statusbar
13) Option to disable quick settings/power menu on secure lockscreen
DOWNLOADS:
https://expressluke.github.io/pages/roms.html
Sources:
ROM Source: https://github.com/cosp-project/
Kernel Source code: https://gitlab.com/developerluke/samsung/hero/android_kernel_samsung_universal8890
Device tree: https://gitlab.com/developerluke/samsung/hero/android_device_samsung_herolte
How do I install?
.
Aybouzaglou said:
How do I install?
Click to expand...
Click to collapse
Like any other custom rom. Install twrp. Wipe data system and cache. Flash.reboot
I'm going to try it, thanks
Installed it working very smooth so far
Can't watch Netflix of prime video in HD or HDR, is that in all custom roms? Is it possible to fix?
Can i install gapps sir? ..
04.jeremiah said:
Can i install gapps sir? ..
Click to expand...
Click to collapse
Yes you can.
I have been using these for a few days. And I have to say this is the smoothest pie rom out for the S7, I tried all the other ones and this one is much much smoother, thank you very much Dev!! This is amazing work.
**=**
hello everybody,
I tried this rom because I want to ungooglize and it is not so easy.
I have to say that I am very happy for this rom it is smooth and I haven't many problems. The installation is easy even if it is different than others: you have to choose after the installation if you want microg or play store. and you can choose after that the pack of gapps you want to install (I didnot try this part.
I didn't understood how to root the phone if I am in microg but it is because I am short in time this week I'll wait for the week-end to discover the rom.
The only problem I didn't resolve and that wasn't one when I was on superman rom and googlized is the echo of the speaker when I call somebody. I use that a lot at work and if somebody have an easy solution I take it now.
Thanks to the time and long life to the rom.
@+B
Hi. I'm thinking giving this rom a try, but was wondering what it's based on. Is it based on stock, lineage, or something else? Just to know what issues I should expect
Bertrand* : the issue concerning echo in speakerphone is the last and ultime bug that cannot be resolved by now because samsung not release driver noise cancellation.
you must decide if you can live without it.
i'm thinking to try this rom,there are more benefit than inconvenient to have pie rom.
Como instalar play Store?
He instalado la Rom y decirle que va muy ligera, querría saber como se instala Play Store y decirle también que no deja instalar cuentas de correo.
Un saludo y gracias por la Rom
ASHA (Aka Android streaming to hearing aids) supported ?
etcjrb said:
He instalado la Rom y decirle que va muy ligera, querría saber como se instala Play Store y decirle también que no deja instalar cuentas de correo.
Un saludo y gracias por la Rom
Click to expand...
Click to collapse
Hola,
necesitas ir en los parametros COSP/ Updater/ Store y ya estaras
Es lo mismo por MicroG (en mas facil)
Saludo,
Some screenshots of rom and battery life would be great !
Thanks
How can I install this rom with command line?
Due to the options that are presented after the install I can't do it I don't think.
What I'm doing:
adb reboot recovery
adb shell
twrp install /sdcard/rom_name.zip
Doesn't install. How can I do this?
Thank you.
The rom is the smoothest pie ROM I ever tried but the battery drain is horrible I don't know if it's just me.
Here some screenshots using a substratum theme.
is there a way to get the Bluetooth simaccess profile running. Tried the rsap installer and it does not work even with installing the Image via twrp.
otherwise a very nice Rom.
Guys, I DID IT !!!!
Working Samsung A52s (SM-A528B/DS) with Unlocked Bootloader, Rooted (Magisk), Passing SafetyNet and WORKING CAMERA (yaaay).
Problem is that I have no idea how I did it, because it was 3 days of flashing, patching, reinstalling and phone bricking too (unfortunately).
I am attaching a screenshot I did with the phone while writing this post in Word. Someone wanted screenshots in split screen as a proof so.. boom, here ya go.
I have a lot of pictures that I made in last 3 days, so I will try to write some more detailed instructions soon. But now at least try this:
This should work for anyone, even people without working camera after unlocking bootloader
1. Download latest Firmware and Odin from samfw.com (don’t know why but these was only one that worked for me, bricked my phone earlier with different fw)
2. Unpack downloaded firmware and copy AP to a phone with Magisk 24.1
3. Use Magisk app to patch the AP file and download it back to PC
4. Unlock bootloader (first in developer settings, then in the download mode)
5. Reboot
6. Go to Download mode (You should see OEM: OFF (U))
7. Flash with Odin all the Firmware files you downloaded, but to AP put the patched file
8. Reboot
9. Go to magisk, do what he wants, reboot, in settings activate seamless host, activate Zygisk, reboot, download and install module kdrag0n’s safetynet-fix v2.2.1 (https://github.com/kdrag0n/safetynet-fix/releases)
10. reboot
11. yaaay
UPDATE: Ok, It seems that the Camera software will fail after reboot once. When you close it and open it again, it works.
CONFIRMED: I had to reflash after trying some TWRP and now I can confirm that patching the "safetynet-fix v2.2.1" will allow you to use the camera after one run. The Samsung Cam App will fail on the first run, so when you kill it in the app switcher and run again, it works in a normal way (switching cameras, front/back and everyhing).
reserved
Arobase40 said:
Ok, I feel happy for you you succeeded to root your phone with your camera working and you pass the SafetyNet test by activating Zygist with safetynet-fix v2.2.1, but what have you done differently from my guide as you as you just got updated information from my thread ?
You passed SafetyNet test and so what next ???
Have you got Samsung Secure Folder, Samsung Health or Samsung Pay working or such other protected Samsung apps ???
Are you getting Xprivacylua or AfWall+ (may be this one but not sure) working ???
Firefds kit [R] is not yet update to be compatible with Android 12, so it only partially works...
On my Galaxy Note 9, I didn't pass SafetyNet test, but Samsung Secure Folder, Google pay, Samsung Health are fully working... ^^
Samsung Pay is working but only with a Samsung Watch...
With another configuration I passed SafetyNet test but all above apps aren't working at all !!! ^^
I don't mind you created another thread and another guide on how to root the A528B but what is the interest if you don't explain how you improved mine and what new features you got ???
Click to expand...
Click to collapse
A. I didn't read your guide since your guide openly says it doesn't work with camera
B. I needed camera so I created my own guide where the camera works and it is here for everyone to read
testestestest said:
Guys, I DID IT !!!!
Working Samsung A52s (SM-A528B/DS) with Unlocked Bootloader, Rooted (Magisk), Passing SafetyNet and WORKING CAMERA (yaaay).
Problem is that I have no idea how I did it, because it was 3 days of flashing, patching, reinstalling and phone bricking too (unfortunately).
I am attaching a screenshot I did with the phone while writing this post in Word. Someone wanted screenshots in split screen as a proof so.. boom, here ya go.
I have a lot of pictures that I made in last 3 days, so I will try to write some more detailed instructions soon. But now at least try this:
This should work for anyone, even people without working camera after unlocking bootloader
1. Download latest Firmware and Odin from samfw.com (don’t know why but these was only one that worked for me, bricked my phone earlier with different fw)
2. Unpack downloaded firmware and copy AP to a phone with Magisk 24.1
3. Use Magisk app to patch the AP file and download it back to PC
4. Unlock bootloader (first in developer settings, then in the download mode)
5. Reboot
6. Go to Download mode (You should see OEM: OFF (U))
7. Flash with Odin all the Firmware files you downloaded, but to AP put the patched file
8. Reboot
9. Go to magisk, do what he wants, reboot, in settings activate seamless host, activate Zygisk, reboot, download and install module kdrag0n’s safetynet-fix v2.2.1 (https://github.com/kdrag0n/safetynet-fix/releases)
10. reboot
11. yaaay
UPDATE: Ok, It seems that the Camera software will fail after reboot once. When you close it and open it again, it works.
CONFIRMED: I had to reflash after trying some TWRP and now I can confirm that patching the "safetynet-fix v2.2.1" will allow you to use the camera after one run. The Samsung Cam App will fail on the first run, so when you kill it in the app switcher and run again, it works in a normal way (switching cameras, front/back and everyhing).
Click to expand...
Click to collapse
Ok, I confirm this works!! Way to go sir. Thanks so much and I encourage everyone to do this method. WooHoo
Arobase40 said:
Ok but does it changes anything since my post #218 of my own guide ?
Click to expand...
Click to collapse
not that i can tell
Arobase40 said:
UPDATED : How to root Galaxy A52S 5G (SM-A528B)
This is a highly updated tutorial on how to root the Galaxy A52S 5G (SM-A528B) phone based on new version of Magisk and from feedbacks I received from users after the release of the first guide version ! ;) This guide should work with other...
forum.xda-developers.com
As I was myself trying to use Zygist with SafetyNet 2.2.1 version even though I didn't mention it explicitely as Safetynet 2.2.1 is only working with Zygist ?
"Ok, nice try mate but Zygisk-LSPosed is even worse !!!
It broke FoxMagiskModuleManager when Zygisk-LSPosed has very poor modules list. It broke AfWall+ and it partially broke Firefds kit and no progress at all with Samsung apps !!!"
Does this still apply ?
Click to expand...
Click to collapse
yes as far as lsposed goes, never used the fox app or afwall so can't say. no gravity box for android 12 yet
Arobase40 said:
So that means that since my post #218 no one with failed camera has installed SafetyNet Fix 2.2.1 with Zygist and no one has checked if that has an impact on the camera, and thus no report to me ??? lol
I just remind you that my camera has always been working so I couldn't expected any changes on this aspect... ^^
Finally, if my guide offered "limited root", this one offers even more limited one as with the exception of AdAway what this root stands for if you can't at least protect your privacy ???
Click to expand...
Click to collapse
you are lucky enough to be in a region that allows the camera to function while boot loader is unlocked
One thing I've noticed, after a restart the camera fails until closing it and killing the app in recent apps, then it works.
testestestest said:
Guys, I DID IT !!!!
Working Samsung A52s (SM-A528B/DS) with Unlocked Bootloader, Rooted (Magisk), Passing SafetyNet and WORKING CAMERA (yaaay).
Problem is that I have no idea how I did it, because it was 3 days of flashing, patching, reinstalling and phone bricking too (unfortunately).
I am attaching a screenshot I did with the phone while writing this post in Word. Someone wanted screenshots in split screen as a proof so.. boom, here ya go.
I have a lot of pictures that I made in last 3 days, so I will try to write some more detailed instructions soon. But now at least try this:
This should work for anyone, even people without working camera after unlocking bootloader
1. Download latest Firmware and Odin from samfw.com (don’t know why but these was only one that worked for me, bricked my phone earlier with different fw)
2. Unpack downloaded firmware and copy AP to a phone with Magisk 24.1
3. Use Magisk app to patch the AP file and download it back to PC
4. Unlock bootloader (first in developer settings, then in the download mode)
5. Reboot
6. Go to Download mode (You should see OEM: OFF (U))
7. Flash with Odin all the Firmware files you downloaded, but to AP put the patched file
8. Reboot
9. Go to magisk, do what he wants, reboot, in settings activate seamless host, activate Zygisk, reboot, download and install module kdrag0n’s safetynet-fix v2.2.1 (https://github.com/kdrag0n/safetynet-fix/releases)
10. reboot
11. yaaay
UPDATE: Ok, It seems that the Camera software will fail after reboot once. When you close it and open it again, it works.
CONFIRMED: I had to reflash after trying some TWRP and now I can confirm that patching the "safetynet-fix v2.2.1" will allow you to use the camera after one run. The Samsung Cam App will fail on the first run, so when you kill it in the app switcher and run again, it works in a normal way (switching cameras, front/back and everyhing).
Click to expand...
Click to collapse
thank you very much )))) I will try this weekend!
Guys, can anybody explain to me , why Samsung is apparently making it so hard for the customers to root their devices? Is it a problem with Samsung or with Magisk, or both?
Not being able to root via Magisk is a real dealbreaker to this otherwise well-specced phone (at least it is to me!).
Going to try this method with Android 11 using Magisk 24.3 and safety net 2.2.1 which I hope will allow the camera to work also.
Edit: It works with android 11.
Arobase40 said:
Why wouldn't it work with Android 11 as it is not related ???
You mean you downgraded to Android 11 and got stuck with a very old security patch just to get GravityBox and probably with Firefds Kit [R] working ??? lol
Click to expand...
Click to collapse
Yes, yes and yes. LOL and better battery life too
I've had no bootloops when changing things FireFDS and I'm glad to have a working gravity box... I'll report battery after a few days.
testestestest said:
Guys, I DID IT !!!!
Click to expand...
Click to collapse
Hi, I'm new here and I bought the A528B, I don't speak English and I use google translate... maybe this is asking too much but a step by step video would be too much to ask? having to translate it costs me a lot trying to follow the guide...
I don't understand how I have to do to be able to root it and have the camera working
bobfrantic said:
Ok, confirmo que esto funciona!! Bien hecho señor. Muchas gracias y animo a todos a hacer Desbloquee el gestor de arranque (primero en la configuración del desarrollador, luego en el modo de descarga)
Click to expand...
Click to collapse
testestestest said:
Chicos, LO HICE!!!!
Samsung A52s (SM-A528B/DS) en funcionamiento con cargador de arranque desbloqueado, rooteado (Magisk), pasando SafetyNet y CÁMARA DE TRABAJO (yaaay).
El problema es que no tengo idea de cómo lo hice, porque fueron 3 días de flashear, parchear, reinstalar y bloquear el teléfono también (desafortunadamente).
Adjunto una captura de pantalla que hice con el teléfono mientras escribía esta publicación en Word. Alguien quería capturas de pantalla en pantalla dividida como prueba, así que... boom, aquí tienes.
Tengo muchas fotos que hice en los últimos 3 días, así que intentaré escribir algunas instrucciones más detalladas pronto. Pero ahora al menos prueba esto:
Esto debería funcionar para cualquier persona, incluso para las personas que no tendrán una cámara en funcionamiento después de desbloquear el gestor de arranque.
1. Descargue el último firmware y Odin de samfw.com (no sé por qué, pero estos fueron solo uno que se cubrieron para mí, bloquearon mi teléfono antes con un firmware diferente)
2. Descomprima el firmware descargado y copie AP a un teléfono con Magisk 24.1
3. Use la aplicación Magisk para parchear el archivo AP y descárguelo nuevamente a la PC
4. Desbloquee el cargador de arranque (primero en la configuración del desarrollador, luego en el modo de descarga)
5. Reiniciar
6. Vaya al modo de descarga (debería ver OEM: APAGADO (U))
7. Flashee con Odin todos los archivos de Firmware que descargó, pero a AP puso el archivo parcheado
8. Reiniciar
9. Vaya a magisk, haga lo que quiera, reinicie, en la configuración active el host integrado, active Zygisk, reinicie, descargue e instale el módulo kdrag0n's safetynet-fix v2.2.1 ( https://github.com/kdrag0n/safetynet -fix/ lanzamientos )
10. reiniciar
11. siiii
ACTUALIZACIÓN: Ok, parece que el software de la cámara fallará después de reiniciar una vez. Cuando lo cierras y lo abres de nuevo, funciona.
CONFIRMADO: Tuve que volver a flashear después de probar TWRP y ahora puedo confirmar que parchear "safetynet-fix v2.2.1" te permitirá usar la cámara después de una ejecución. La aplicación Samsung Cam fallará en la primera ejecución, por lo que cuando la elimine en el conmutador de aplicaciones y vuelva a ejecutarla, funcionará de manera normal (cambiando de cámara, frontal/trasera y todo).
Click to expand...
Click to collapse
EL DESBLOQUEO DE ARRANQUE ES ANTES O DESPUES DE PARCHEAR EL AP
Do I really need to patch whole AP?
Tried with only boot, vbmeta, vendor and dtbo, but bootloop was the only result.
ch3mn3y said:
Do I really need to patch whole AP?
Tried with only boot, vbmeta, vendor and dtbo, but bootloop was the only result.
Click to expand...
Click to collapse
Well then, there you go. You got bootloop for not following the instructions
Did i understand right?
2. Unpack downloaded firmware and copy AP to a phone with Magisk 24.1
3. Use Magisk app to patch the AP file and download it back to PC
Click to expand...
Click to collapse
These steps are requiring a mobile with Magisk installed on it to patch the AP?
If yes, is there any other option, if i have only a A52s 5G ?
luffy786 said:
Did i understand right?
These steps are requiring a mobile with Magisk installed on it to patch the AP?
If yes, is there any other option, if i have only a A52s 5G ?
Click to expand...
Click to collapse
You can install the Magisk app without being rooted. It's an app like any other app, you simply won't have root access. So install it on your A52s 5G and patch your files with it.
Guys can someone remind me what i need to do to make smartview working? I need to hide something from root?
BlueChris said:
Guys can someone remind me what i need to do to make smartview working? I need to hide something from root?
Click to expand...
Click to collapse
Well, I added these 2 lines:
wlan.wfd.hdcp=disable
wifi.interface=wlan0
On the following files:
product/etc/build.prop
system/build.prop
system/system_ext/etc/build.prop
vendor/build.prop
vendor/default.prop
I'm pretty sure not all of them are needed but I'm too lazy to figure out which prop file really needs it lmao if I had to take a guess I'd say either vendor build.prop or default.prop, who knows.