Update TWRP from 3.2.2.0 to 3.2.3.1 - Xiaomi Redmi Note 5 Pro Questions & Answers

Hello guys how to update TWRP from 3.2.2.0 to 3.2.3.1?
I'm ARB 4.
Thanks

If you are using TWRP then download latest twrp (it will be in .img format)
reboot to current TWRP
choose install option
below there will be a option Install zip press it, it will change to Install image
Now select latest twrp.img
Now select recovery then flash
there will be no issues

vigneshjack3 said:
If you are using TWRP then download latest twrp (it will be in .img format)
reboot to current TWRP
choose install option
below there will be a option Install zip press it, it will change to Install image
Now select latest twrp.img
Now select recovery then flash
there will be no issues
Click to expand...
Click to collapse
THANKS!!!!

Related

Installing blisspop

Is there a step by step procedure for installing twrp and blisspop on my e980? presently running the 20i firmware. Tried Flashify but it fails to install twrp. This phone has root but is carrier unlocked but has never been flashed so I am stumped. Any help appreciated
I had this same issue but with installing a recovery in the first place due to the locked bootloader and I couldn't find fixes.
But some info would be useful
1. What firmware are you on ex : Kitkat 4.4.2 etc - this can be checked in about phone option.
I used GPro recovery then flashed twrp via that using the unofficial cwm it installed file for the recovery at the bottom of this thread :
http://forum.xda-developers.com/optimus-g-pro/general/root-bootloader-unlock-t3203573
Steps that may work
1. Enabled unknown sources in security
2. Installed the GPro apk file
3. Hit flash kitkat recovery for g pro
4. Moved the recovery.IMG file for twrp to /sdcard
5. Booted into recovery using the app
6. Flash the recovery.IMG file
What might work (worked for me)
1. Installed cwm using the above method steps 1-3
2. Get latest twrp.IMG (recovery.IMG)
3. Go into flashify
4. Hit flash recovery image
5. Hit choose a file and use your preferred file browser to navigate to your file
6. Hit flash now.
7. Reboot to recovery or normal reboot.
You can mix these two methods and try them differently as for blisspop
1.Get the .zip file
2.Boot into your recovery
3. Wipe System,cache,dalvik cache, and data.
4. Flash the .zip file.
5. Hit reboot to system
WARNING make a backup and check if the .zip is corrupted before booting into recovery
You can also Google methods for installing ROMs.
Hope I helped.

LATEST TWRP Recovery + Root for lenovo a7000 [Marshmallow][Android 6.0]

Latest TWRP recovery and root for Lenovo a7000 marshmallow firmware.
Download and unzip TWRP and SP Flash tool on PC.
Copy the SuperSU.-v71zip in your phone which you will find in the TWRP .zip file.
Run SP flash tool and In the menu Option tab, go to Download, and put a tick in the DA DL All with Checksum".
choose scatter in the TWRP folder and then select "Download only" and click download.
Now power off the phone and connect the USB cable.
The process will start and after completion, a box will appear with done written on it.
Then Boot into recovery (Power + half a second the two volume buttons).
Now you are on TWRP RECOVERY.
For Rooting: Now select install zip and then navigate to SuperSU-v2.71.zip
reboot.
Download TWRP Recovery 3.0.2-1:click here
Download Latest SP Flash Tool: click here
NOTE: IF YOU ARE USING THIS FOR CUSTOM ROM THEN UNTICK THE BOOT.img IN SPFLASH TOOL WHILE FLASHING THE TWRP OTHERWISE YOUR DEVICE COULD BE IN BOOT LOOP STATE. (FLASH STOCK ROM TO FIX)
FOR STOCK ROM NO NEED TO UNCHECK
Yeah! ☺ Will be trying it later. Thanks for the link.
What about 'CWM Recovery' ?
If one succeeds with this TWRP and rooting, then I think one can change TWRP to CWM using flashify or Rashr, provided he/she should confirm that the 'CWM Recovery' will work on Lenovo A 7000 a with android 6.0 OS. But I do not know if the 'CWM' recovery thatwas used earlier when we were on android 5.0, will still work with android 6.0 or not. Can anybody confirm?
this is working men thanks:angel:
Like a charm
Sent from my Lenovo A7000-a using XDA-Developers mobile app
Lenovo A7000 Marshmallow STOCK FIRMWARE
Flash via spflash tool
http://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777
Does backup and restore works on this twrp?
milankumarn said:
Does backup and restore works on this twrp?
Click to expand...
Click to collapse
Yes it support backup and restore.
Worked for me. Thanks a lot!
I have a big problem ...
Few days ago My phone give me option to update to android 6.0 .(Lenovo a7000)
Downloading update package and press update.
When i press update ,phone is immediatly reboot to twrp and thats it .... That all
Nothing happening... rebooting phone and then get message ,update failing and update package automaticaly erased from phone.
Is anything i doing wrong ?
Thanks ,
Regards from Slovenia
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone.
Please help
chabot said:
I have a big problem ...
Few days ago My phone give me option to update to android 6.0 .(Lenovo a7000)
Downloading update package and press update.
When i press update ,phone is immediatly reboot to twrp and thats it .... That all
Nothing happening... rebooting phone and then get message ,update failing and update package automaticaly erased from phone.
Is anything i doing wrong ?
Thanks ,
Regards from Slovenia
Click to expand...
Click to collapse
Use the stock rom found here to go back to factory settings using the stock marshmallow rom. Make sure that you flash using SP Flash Tool as instructed in the link. This will replace TWRP with stock recovery.
Afterwards, you can reinstall TWRP and root,etc.
Sent from my Lenovo K50-t5 using XDA-Developers mobile app
after flashing and rooting i format my sdcard as internal and i notice that no zip/img file appear on twrp. has anyone encounter the same problem?
Unable to Root!
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone. It shows the folder but not as a Zip file.
Please help
dan_daniel04 said:
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone. It shows the folder but not as a Zip file.
Please help
Click to expand...
Click to collapse
I think you have place the supersu zip in external and locating in internal.
I have tested the recovery and it's working fine
Thanks :good::good::good::good:
Hello any way to root without flashing twrp?
PB1974 said:
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone.
Please help
Click to expand...
Click to collapse
I think you have copied the SuperSU-v71.zip in external storage and in TWRP you are searching in internal storage.If it is so the paste it in internal or change storage selection at the time of installing zip.
And paste the zip in root of the storage not in any folder.
As i can see this is your 1st post.
I think this will help you.
Mounting issue with TWRP
After switching sdcard as internal storage. The file manager only shows the ext. Sdcard so from where we can access the internal Sdcard to put that Supersu.zip.And the TWRP only mount only internal Sdcard. Not able to mount ext. Sdcard plz. Help!
Hey can i flash this supersu.zip via twrp 3.02-1?
Couple hours ago i flashed supersu.zip from lenovo a7000 indonesia group, and all i got was bootloop. Is it possible that with this supersu i could get another bootloop? Thanks

Miui keeps replacing TWRP with stock recovery

Hi there,
I'm trying to install TWRP onto my Xiaomi mi6 in order to keep backups and flash custom ROMs.
Last night I tried to install TWRP via ADB. I flashed the .img file, and was careful to hold down the 'volume up' button as I hit the command 'fastboot reboot' to ensure I didn't boot into stock recovery.
This brought me into the TWRP recovery. I selected READ-WRITE option (as opposed to read only) and tried rebooting to system. After this I tried rebooting into recovery to access TWRP once again, but was brought back to the stock recovery. TWRP couldn't be accessed.
I tried to reflash TWRP and to follow the suggestion posted here: https://forum.xda-developers.com/mi-6/development/recovery-twrp-xiaomi-mi-6-t3619822
The file: /system/bin/install-recovery.sh present in stock system is responsible for that.
You can simply stop this from happening by deleting it or renaming it to install-recovery.sh.bak using any root explorer or via TWRP (Advanced -> File Manager).
Click to expand...
Click to collapse
However, I could not find the file /system/bin/install-recovery.sh using the TWRP file explorer.
Any suggestions you could offer would be much appreciated.
My current miui version is: global 8.2.2.0 (NCAMIEC) and the phone has not been rooted (bootloader is unlocked).
spraggzilla said:
Hi there,
I'm trying to install TWRP onto my Xiaomi mi6 in order to keep backups and flash custom ROMs.
Last night I tried to install TWRP via ADB. I flashed the .img file, and was careful to hold down the 'volume up' button as I hit the command 'fastboot reboot' to ensure I didn't boot into stock recovery.
This brought me into the TWRP recovery. I selected READ-WRITE option (as opposed to read only) and tried rebooting to system. After this I tried rebooting into recovery to access TWRP once again, but was brought back to the stock recovery. TWRP couldn't be accessed.
I tried to reflash TWRP and to follow the suggestion posted here: https://forum.xda-developers.com/mi-6/development/recovery-twrp-xiaomi-mi-6-t3619822
However, I could not find the file /system/bin/install-recovery.sh using the TWRP file explorer.
Any suggestions you could offer would be much appreciated.
My current miui version is: global 8.2.2.0 (NCAMIEC).
Click to expand...
Click to collapse
After the twrp recovery installation is installed in the twrp recovery you install the " no-verity-opt-encrypt-5.1.zip" .
This will keep the twrp recovery,after restarting the system.
trifos said:
After the twrp recovery installation is installed in the twrp recovery you install the " no-verity-opt-encrypt-5.1.zip" .
This will keep the twrp recovery,after restarting the system.
Click to expand...
Click to collapse
Thanks for the response. May I ask, where I find this zip?
spraggzilla said:
Thanks for the response. May I ask, where I find this zip?
Click to expand...
Click to collapse
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.1.zip
Similarly when I install tarp in my Redmi 5 it gets install but shows 0mb internal storage and after that if I press reboot to recovery or reboot to system then twrp get deleted and mi stock recovery replace it .
Pls any body help me to install it

Pettyl-[twrp+/decrypt.zip]

I do not have this device however I made these files for PETTYL users..
if you download it and it works, please hit the give THANKS button!
http://remainsilent.net/pettyl-twrp.img ------- fastboot flash recovery pettyl-twrp.img
http://remainsilent.net/pettyl-decrypt.zip TWRP ->> install ZIP ->> pettyl-decrypt.zip
I've instlled this "TWRP 3.2.1-moto-e5++-0" on Moto E5 XT-1920-16 (PETTYL) and works! Then successfully flashed Magisk 18.1 and now I have a root.
Thank you!
But now I have a problem. My phone tried to install OTA update and boot into Recovery to complete instalation. But because it's a TWRP the update can't be installed.
Now the phone only boot into TWRP. Can't start the system. Even on TWRP menu -> Reboot -> System then the phone boot again into TWRP. How to fix it?
Aalesund said:
I've instlled this "TWRP 3.2.1-moto-e5++-0" on Moto E5 XT-1920-16 (PETTYL) and works! Then successfully flashed Magisk 18.1 and now I have a root.
Thank you!
But now I have a problem. My phone tried to install OTA update and boot into Recovery to complete instalation. But because it's a TWRP the update can't be installed.
Now the phone only boot into TWRP. Can't start the system. Even on TWRP menu -> Reboot -> System then the phone boot again into TWRP. How to fix it?
Click to expand...
Click to collapse
You need kill the repeating OTA install sequence or, like you reporting, every time you boot into system, OTA installation get triggered and you get caught in the cycle. In TWRP menu, Mount System, go back main menu find your TWRP File Manager. Select System folder, Priv-App, find your OTA app (may be name 3C_OTA or something similar). Go ahead delete it if you don't plan on installing OTA on your device. You can also delete the OTA update zip package to stop your OS from continual trying to install it. In TWRP you need mount Cache, use TWRP File Manager again to open Cache directory, search for the OTA zip package and delete it.
whodat711 said:
I do not have this device however I made these files for PETTYL users..
if you download it and it works, please hit the give THANKS button!
http://remainsilent.net/pettyl-twrp.img ------- fastboot flash recovery pettyl-twrp.img
http://remainsilent.net/pettyl-decrypt.zip TWRP ->> install ZIP ->> pettyl-decrypt.zip
Click to expand...
Click to collapse
the links are dead i beg these files get re-uploaded please!!!!
TheLastAlphaUK said:
the links are dead i beg these files get re-uploaded please!!!!
Click to expand...
Click to collapse
You can get firmware for the xt1920 series PettyL from here https://mirrors.lolinet.com/firmware/moto/pettyl/official/
You can get custom recovery I built @ https://orangefox.tech
it should be all you need
TheLastAlphaUK said:
the links are dead i beg these files get re-uploaded please!!!!
Click to expand...
Click to collapse
Peetyl-[twrp+/decrypt zip
Can u reupload decrypt.zip?
Working recovery R9.0-3 on xt1920-16
i got this error C:\Users\GPS\Downloads\OrangeFox-R9.0-3-pettyl.zip: Unexpected end of archive. Using 7zip i extracted recovery.img and copied to external sd card and also to platform-tools folder. In fastboot i used "fastboot boot recovery.img" command , my phone booted to Orange recovery and there i used "Install Image" to flash recovery. If i try to flash downloaded zip file gives me an error Now i have working recovery and root (magisk 18.1) on E5 Play :victory:!
anyone still have pettyl-decrypt.zip? if so can you please upload it somewhere
Do someone have the pettyl-decrypt.zip?

Question [HELP] What did I wrong? Flashing TWRP + ROM + GApps + Magisk

I would be very thankfull, if you could help me with my problem.
After unlocking my bootloader successfully, I re-enabled USB Debugging in MIUI and booted into fastboot mode.
From there I booted the latest "twrp-3.7.0_12-0-munch.img"
1. Which is the correct way to install TWRP permanently (or after an TWRP update)?
https://twrp.me/xiaomi/xiaomipocof4.html
"Flash Current TWRP" or "Install Recovery Ramdisk"?
[Edit] Flash Current TWRP
To remove encryption it is necesarry to "Format Data" before? or after? ROM flash. When I do that, all TWRP settings are gone (language, vibration off, 24h clock). Are these settings not stored permanent?
[Edit] after flashing rom.zip
2. When I want to flash ROM + GApps, do I need to reboot the recovery for switching partitions?
I flashed "Spark-13.1-Official-munch-20221025.zip" and "NikGapps-core-arm64-13-20220908-signed.zip". I can boot SparkOS, but there are no Gapps installed. The flashing process was skipped.
Thank's for your help!
11insomnium said:
I would be very thankfull, if you could help me with my problem.
After unlocking my bootloader successfully, I re-enabled USB Debugging in MIUI and booted into fastboot mode.
From there I booted the latest "twrp-3.7.0_12-0-munch.img"
1. Which is the correct way to install TWRP permanently (or after an TWRP update)?
POCO F4 / Redmi k40s
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
"Flash Current TWRP" or "Install Recovery Ramdisk"?
To remove encryption it is necesarry to "Format Data" before? or after? ROM flash. When I do that, all TWRP settings are gone (language, vibration off, 24h clock). Are these settings not stored permanent?
2. When I want to flash ROM + GApps, do I need to reboot the recovery for switching partitions?
I flashed "Spark-13.1-Official-munch-20221025.zip" and "NikGapps-core-arm64-13-20220908-signed.zip". I can boot SparkOS, but there are no Gapps installed. The flashing process was skipped - you can see that in the photos added.
3. In TWRP "Backup" there is no system partition (>photo). I'm not sure, if I accidentally wiped it. And in "Mount" the system isn't checked. Is that normal?
I can boot to fastboot, recovery and system. Please tell me right steps to flash/wipe/format without errors.
I added some TWRP logs.
Thank's for your help!
Click to expand...
Click to collapse
1. after fastbooting TWRP use Flash Current TWRP. No format data.
2. SparkOS needs global firmware to be flashed first, then reboot to recovery, then flash ROM, then format data.
There is a version with Gapps already included, working fine.
@UniNick
1. Flash Current TWRP is the prefered Installation Method from official site. Do I need to reflash TWRP after each ROM flash to survive? When formating data after ROM flash, the TWRP setting are also deleted (no more TWRP folder in internal storage).
2. My Poco F4 was shipped with MIUI Global 13.0.3.0 (SLMEUXM). So I downloaded and flashed Europe V13.0.7.0.SLMEUXM from https://xiaomifirmwareupdater.com/firmware/munch/
Baseband version is now higher.
I know there is a Gapps Version of SparkOS, but I don't know which Google apps are included and I just need a minimum of the package. Therefore I asked how to flash Gapps after ROM.zip, that both are on the same A/B partition.
I already had to reset/flash the "V13.0.5.0.SLMMIXM_20220815.0000.00_12.0_global" with MI Flash tool, because I had no access to Internal Storage with my PC to copy files on Poco F4.
11insomnium said:
@UniNick
1. Flash Current TWRP is the prefered Installation Method from official site. Do I need to reflash TWRP after each ROM flash to survive? When formating data after ROM flash, the TWRP setting are also deleted (no more TWRP folder in internal storage).
2. My Poco F4 was shipped with MIUI Global 13.0.3.0 (SLMEUXM). So I downloaded and flashed Europe V13.0.7.0.SLMEUXM from https://xiaomifirmwareupdater.com/firmware/munch/
Baseband version is now higher.
I know there is a Gapps Version of SparkOS, but I don't know which Google apps are included and I just need a minimum of the package. Therefore I asked how to flash Gapps after ROM.zip, that both are on the same A/B partition.
I already had to reset/flash the "V13.0.5.0.SLMMIXM_20220815.0000.00_12.0_global" with MI Flash tool, because I had no access to Internal Storage with my PC to copy files on Poco F4.
Click to expand...
Click to collapse
1. yes because most ROMs now bring their own recovery
2. Spark includes like a basic Gapps package
UniNick said:
1. yes because most ROMs now bring their own recovery
2. Spark includes like a basic Gapps package
Click to expand...
Click to collapse
I will try it again tomorrow. Thanks!
After a lot of research I still have some questions. Many users have trouble understanding it when the installation instructions do not list all the steps.
I have read these flashing instruction on the XDA NikGApps page:
Flashing Instructions for A/B devices (Clean Flash is recommended)
Flash Rom in Slot A, Flash twrp, reboot to recovery
Flash Rom in Slot B, Flash twrp, reboot to recovery
Flash NikGapps
Flash Debloater (Optional)
Reboot
So I thought, that this would be the steps:
### First Install / Clean Flash ###
- fastboot boot TWRP image
- in TWRP select "Flash Current TWRP" under "Advanced"
- flash firmware
- reboot recovery (is this reboot necessary before flashing ROM ??)
- wipe > factory reset (recommended or not ??)
- flash ROM (current Slot A > flashing to inactive slot B)
- flash twrp.img in boot partition + (check the box "Flash to both slots" ??)
- go to "Reboot" and change slot
- flash ROM (current Slot B > flashing to inactive slot A)
- flash twrp.img in boot partition + (check the box "Flash to both slots" ??)
???
(optional for GApps)
- flash GApps
Error: Could not mount /system
- format data
- flash twrp.img (again necessary ??) + (check the box "Flash to both slots" ??)
- boot to system + install Magisk.apk
- in Magisk: patch boot.img
- reboot recovery
- flash magisk_patched.img in boot partition + (check the box "Flash to both slots" ??)
- reboot to system
11insomnium said:
After a lot of research I still have some questions. Many users have trouble understanding it when the installation instructions do not list all the steps.
I have read these flashing instruction on the XDA NikGApps page:
Flashing Instructions for A/B devices (Clean Flash is recommended)
Flash Rom in Slot A, Flash twrp, reboot to recovery
Flash Rom in Slot B, Flash twrp, reboot to recovery
Flash NikGapps
Flash Debloater (Optional)
Reboot
So I thought, that this would be the steps:
### First Install / Clean Flash ###
- fastboot boot TWRP image
- in TWRP select "Flash Current TWRP" under "Advanced"
- flash firmware
- reboot recovery (is this reboot necessary before flashing ROM ??)
- wipe > factory reset (recommended or not ??)
- flash ROM (current Slot A > flashing to inactive slot B)
- flash twrp.img in boot partition + (check the box "Flash to both slots" ??)
- go to "Reboot" and change slot
- flash ROM (current Slot B > flashing to inactive slot A)
- flash twrp.img in boot partition + (check the box "Flash to both slots" ??)
???
(optional for GApps)
- flash GApps
Error: Could not mount /system
- format data
- flash twrp.img (again necessary ??) + (check the box "Flash to both slots" ??)
- boot to system + install Magisk.apk
- in Magisk: patch boot.img
- reboot recovery
- flash magisk_patched.img in boot partition + (check the box "Flash to both slots" ??)
- reboot to system
Click to expand...
Click to collapse
Little bit complex.
Try this guide:
Reboot to recovery (twrp or ofox), I prefer boot recovery by fastboot, command is `fastboot boot rec.img` (You can download from orangefox official website)
Flash firmware (Optional)
Flash rom
Flash gapps (if flashed vanilla build)
Format data
Reboot to system
psklf said:
Little bit complex.
Try this guide:
Reboot to recovery (twrp or ofox), I prefer boot recovery by fastboot, command is `fastboot boot rec.img` (You can download from orangefox official website)
Flash firmware (Optional)
Flash rom
Flash gapps (if flashed vanilla build)
Format data
Reboot to system
Click to expand...
Click to collapse
I'm not sure if GApps will be installed in the same slot if I flash it directly after the ROM.zip.
I have to reflash TWRP/OrangeFox before formating data and booting to system or it will be lost when I boot back to recovery.
When updating the ROM, the recovery is flashing it to inactive slot. Do I need to click through the (google) setup again, or is this data stored in another partition? When do I need to reflash GApps?
flash ROM.zip
wipe cache + dalvik
reflash recovery
reflash magisk_patched
reboot system
11insomnium said:
I'm not sure if GApps will be installed in the same slot if I flash it directly after the ROM.zip.
I have to reflash TWRP/OrangeFox before formating data and booting to system or it will be lost when I boot back to recovery.
When updating the ROM, the recovery is flashing to inactive slot. Do I need to do the (google) setup again, or is this data stored in another partition? When do I need to reflash GApps?
flash ROM.zip
wipe cache + dalvik
reflash recovery
reflash magisk_patched
reboot system
Click to expand...
Click to collapse
About GApps maybe this is the right way ...
flash ROM
flash recovery itself( w/ orangefox there is a checkbox)
reboot to recovery
flash gapps
Please bear with me, as this is my first A/B device and I'm quite confused about the flashing procedure.
I successfully unlocked bootloader and flashed TWRP.
I tried to install A13 SparkOS vanilla + Basic NikGapps. Like @11insomnium said in the 1st post, ROM was installed fine, but Gapps package was not. I tried what @psklf says, no good... Each time I try to flash the Gapps package I get a message that /system size is 0KB, and of course the setup process is skipped due to lack of space...
On a side note, when flashing the ROM, step 1/2 completes fine, but on step 2/2 I get some errors about failing to access /system, /system_product, /vendor etc... However, as I said, ROM boots fine afterwards...
Am I missing something? Or is flashing the integrated Gapps ROM version the way to go?
@11insomnium did you manage to sort this out?
@hammerheadache I'm still using the GApps version 20221113, but recently I updated my device to latest OFox recovery (R11.1_2_A12) and A13 firmware (V14.0.2.0.TLMEUXM). The result was that my fingerprints were deleted and I could't save new ones, so I reflashed the old version (V13.0.7.0.SLMEUXM).
I think you missed the reboot to recovery. This should work for you:
- flash ROM
- flash recovery
- reboot to recovery
- flash NikGapps
- reboot to system
Edit: Maybe this will also help you:
https://wiki.orangefox.tech/en/guides/flashing
I haven't completely understood it yet either
hammerheadache said:
Please bear with me, as this is my first A/B device and I'm quite confused about the flashing procedure.
I successfully unlocked bootloader and flashed TWRP.
I tried to install A13 SparkOS vanilla + Basic NikGapps. Like @11insomnium said in the 1st post, ROM was installed fine, but Gapps package was not. I tried what @psklf says, no good... Each time I try to flash the Gapps package I get a message that /system size is 0KB, and of course the setup process is skipped due to lack of space...
On a side note, when flashing the ROM, step 1/2 completes fine, but on step 2/2 I get some errors about failing to access /system, /system_product, /vendor etc... However, as I said, ROM boots fine afterwards...
Am I missing something? Or is flashing the integrated Gapps ROM version the way to go?
@11insomnium did you manage to sort this out?
Click to expand...
Click to collapse
I have read in EROFS ROMs like Spark or PE it's problematic to flash GApps or microG as the system is read-only. Also applies to some Magisk modules as well.
amn1987 said:
I have read in EROFS ROMs like Spark or PE it's problematic to flash GApps or microG as the system is read-only. Also applies to some Magisk modules as well.
Click to expand...
Click to collapse
Thanks for the info. That explains why there are ROM versions with GApps included.

Categories

Resources