Related
Definitely upgrading my OP 6 this time with a Oneplus 7 Pro and will be getting it on launch day. Will there be any proper tempered glass protectors which wouldn't block the Oneplus 7 Pro screen on the sides? Wasn't lucky with the Oneplus 6 TG protectors as they were blocking the screen. The screen this time looks a lot more curved from the images and chances of a fully fitting tempered glass looks very bleak with the bezels almost vanishing.
Finished applying gadgetshieldz full body protection on my Oneplus 7 Pro. The screen protector goes all the way to the edges. This is freakin invisible after applying and almost feels like glass...Great scratch protection if you use your device naked.
There is no proper TG protectors yet due to the curved screen. This feels great with the back and camera lens protection as bonus....
AdhityaDhruv said:
Definitely upgrading my OP 6 this time with a Oneplus 7 Pro and will be getting it on launch day. Will there be any proper tempered glass protectors which wouldn't block the Oneplus 7 Pro screen on the sides? Wasn't lucky with the Oneplus 6 TG protectors as they were blocking the screen. The screen this time looks a lot more curved from the images and chances of a fully fitting tempered glass looks very bleak with the bezels almost vanishing.
Or should I go for those liquid or wet install protectors like Gadgetshieldz or Zagg Invisibleshield as these cover the screen edge-to-edge? Gadgetshieldz is already on pre-order
Any Oneplus 7 Pro tempered glass protectors available yet? Whitestone Dome kinda for a reasonable price?
Click to expand...
Click to collapse
There are some in the Amazon but not sure about the quality and no info about the whitestone and zagg. These flexi screen protectors with a case are your best bet till anything worthwhile comes in tempered glass protectors for the Oneplus 7 Pro.
Picked these up from Amazon.
charlieb620 said:
Picked these up from Amazon. View attachment 4757598
Click to expand...
Click to collapse
Any links?
Im just worried due to curved screen on Pro that we wont get a easy to apply one.
Will probably need to use blue light to put it on and that makes them quite expensive and not compatible with all cases. My Pixel 2 XL still has no protector due to this.
Nekromantik said:
Im just worried due to curved screen on Pro that we wont get a easy to apply one.
Will probably need to use blue light to put it on and that makes them quite expensive and not compatible with all cases. My Pixel 2 XL still has no protector due to this.
Click to expand...
Click to collapse
Yes whitestone dome.
Had this on several of my Samsung devices. They work great but the install takes some getting used to and they are much more expensive than a regular tempered glass protector
charlieb620 said:
Picked these up from Amazon.
Click to expand...
Click to collapse
Which one is this? And when you put it up to light do you see tiny small dots throughout the glass? Or is it completely transparent? Thanks!
I bought this one from UltimateShield
https://www.ultimateshield.co.uk/collections/oneplus-7-pro/products/oneplus-7-pro-tempered-glass-screen-protector
I'll write a short review after using it
force70 said:
Yes whitestone dome.
Had this on several of my Samsung devices. They work great but the install takes some getting used to and they are much more expensive than a regular tempered glass protector
Click to expand...
Click to collapse
But Whitestone dome is providing screen protectors for Samsung devices. Not for Oneplus.
I've just been trolling Aliexpress and it seems like that they are making UV curing full cover screen protectors, here is just 2 that I found that might work really well for the OP7 Pro. ?
https://www.aliexpress.com/item/UV-Liquid-Full-Glue-Tempered-Glass-For-OnePlus-7-Pro-Case-Friendly-Screen-Protector-Cover-One/33014809682.html?spm=2114.search0104.3.15.137f9e35CI8RH0&ws_ab_test=searchweb0_0,searchweb201602_1_10065_10130_10068_10547_319_317_10548_10696_10192_10190_453_10084_454_10083_10618_10307_10820_10301_10821_10303_537_536_10059_10884_10887_321_322_10103,searchweb201603_53,ppcSwitch_0&algo_expid=0b114db8-3dd3-476c-a40c-2dd1871794c6-2&algo_pvid=0b114db8-3dd3-476c-a40c-2dd1871794c6
https://www.aliexpress.com/item/Screen-Protector-with-fingerprint-unlock-for-Oneplus-7-Pro-UV-Glass-film-full-cover-for-Oneplus/33016616660.html?spm=2114.search0104.3.3.137f9e35CI8RH0&ws_ab_test=searchweb0_0,searchweb201602_1_10065_10130_10068_10547_319_317_10548_10696_10192_10190_453_10084_454_10083_10618_10307_10820_10301_10821_10303_537_536_10059_10884_10887_321_322_10103,searchweb201603_53,ppcSwitch_0&algo_expid=0b114db8-3dd3-476c-a40c-2dd1871794c6-0&algo_pvid=0b114db8-3dd3-476c-a40c-2dd1871794c6
AdhityaDhruv said:
But Whitestone dome is providing screen protectors for Samsung devices. Not for Oneplus.
Click to expand...
Click to collapse
One plus hasnt had a curved screen until now so no need for whitestone to make one.
They may now
Reached out to Dbrand and they said they're working on a Prism screen protector for the 7 Pro
Quick reminder to anyone buying one, as with the OP6T, once you apply the protector, remember to re-register your fingerprints for accurate detection.
(Experienced users will know this, newbies may not realise it)
I was using 3mk Arc 3D foil on my Galaxy S8+. It was much better than any glass I was using before. It had self healing feature and was totally invisible on any angle. Compared to any 9h glass which often are shinny as hell it was a perfect solution. Also it was compatible with any case( I was using it with neo hybrid from Spigen) I hope that 3MK will make it also for OP7 pro.
Using the Skinomi matte protector on my 6T which is self healing and feels like a glass screen protector. Getting the same thing for the 7 pro as soon as it's available. Best screen protector I've ever had.
i ordered this on
https://s.click.aliexpress.com/e/zieOoe4
---------- Post added at 02:51 PM ---------- Previous post was at 02:49 PM ----------
an this case
| sFor Oneplus 7 Pro Case Soft Silicone Coque Fundas Phone Case For Oneplus 7 Pro Cover For Oneplus 7 Pro Case
https://s.click.aliexpress.com/e/onFTQEM
AdhityaDhruv said:
Definitely upgrading my OP 6 this time with a Oneplus 7 Pro and will be getting it on launch day. Will there be any proper tempered glass protectors which wouldn't block the Oneplus 7 Pro screen on the sides? Wasn't lucky with the Oneplus 6 TG protectors as they were blocking the screen. The screen this time looks a lot more curved from the images and chances of a fully fitting tempered glass looks very bleak with the bezels almost vanishing.
Finished applying gadgetshieldz full body protection on my Oneplus 7 Pro. The screen protector goes all the way to the edges. This is freakin invisible after applying and almost feels like glass...Great scratch protection if you use your device naked.
There is no proper TG protectors yet due to the curved screen. This feels great with the back and camera lens protection as bonus....
https://www.gadgetshieldz.com/oneplus-7-pro-screen-protectors-guards.html
Click to expand...
Click to collapse
How was the install? How are you liking the feel of the screen protector so far?
Doesn't the OnePlus 7 Pro come with a screen protector pre-installed?
I dont think Oneplus is gonna be making any screen protectors specifically for the OP7P.
t41n7ed said:
Doesn't the OnePlus 7 Pro come with a screen protector pre-installed?
Click to expand...
Click to collapse
It does unless you buy one from T-Mobile USA.
Sent from my GM1915 using Tapatalk
Welcome everyone to introduce the good quality protective film for OnePlus 9 Pro........
A few protectors showing up already :
Spigen NeoFlex Screen Protector for OnePlus 9 Pro - 2 Pack Foluu [2-Pack for OnePlus 9 Pro 5G Screen Protector, Tempered Glass [Full Adhesive][Full Coverage] [Bubble-Free] [Anti Scratch] HD Clear High Responsive for OnePlus 9 Pro 5G 2021 ReleaseSkinomi Screen Protector Compatible with OnePlus 9 Pro (2-Pack) Clear TechSkin TPU Anti-Bubble HD Film
Anyone had any experience with any of the screen protectors? I tend to wait a bit until there are enough reviews.
SARBR said:
Welcome everyone to introduce the good quality protective film for OnePlus 9 Pro........
Click to expand...
Click to collapse
I intend to leave on the factory installed film.
Hi,
There's also this foluu tempered glass protector with no black border, and with UV lamp :
Foluu [2 pack de protection d'écran Oneplus 9 Pro, bord incurvé Full HD [verre trempé liquide UV, solution exclusive pour empreintes digitales ultrasoniques] facile pour Oneplus 9 Pro 2020 (2) : Amazon.fr: High-Tech
Foluu [2 pack de protection d'écran Oneplus 9 Pro, bord incurvé Full HD [verre trempé liquide UV, solution exclusive pour empreintes digitales ultrasoniques] facile pour Oneplus 9 Pro 2020 (2) : Amazon.fr: High-Tech
www.amazon.fr
I think I will go for this tomorrow with my brawn new one+ 9 Pro
Protection écran XFORCE - WeFix
Vous souhaitez protéger l'écran de votre appareil ? Découvrez la protection d'écran WeFix !
www.wefix.net
I bought these. You get two in the pack and it seems to be pretty good quality-wise. I just installed it today and am not currently using the phone, therefore I cannot attest to how well it'll hold up to daily use- but initial impressions are good.
I'll wait for the Whitestone screen protector.
carbondog said:
I bought these. You get two in the pack and it seems to be pretty good quality-wise. I just installed it today and am not currently using the phone, therefore I cannot attest to how well it'll hold up to daily use- but initial impressions are good.
Click to expand...
Click to collapse
This actually looks good for now. Thanks for sharing!
did someone try a tpu hydrogel film screen protector? I think I will go at the shop where they cut it on demand and fix it on the phone
I use Mocolo UV glass and it is really good. Had it on each of my one plus. It sticks with UV glue and covers the full screen even on the curved edges. It's also really cheap - 9€ in the EU. And it's even better than dome glass as it is harder to break. The only disadvantage is that the attached UV diode is poor. I always use that one from the dome glass.
I went w/ this, and was pleasantly surprised. One caveat, it doesn't have a cutout for the front facing camera.
Interesting install as well - they give you a tab that slots into the USB-C port to hold the film in place while you press it smooth/remove bubbles w/ the included squeege. No spray needed/involved either. Feels good to the touch.
Amazon.com: [4 Pack] PULEN for OnePlus 9 Pro Screen Protector (2 Pack) with 2 Pack Glass Camera Lens Protector,HD Clear Scratch Resistant Bubble Free Anti-Fingerprints LinQuidSkin TPU Film : Cell Phones & Accessories
Amazon.com: [4 Pack] PULEN for OnePlus 9 Pro Screen Protector (2 Pack) with 2 Pack Glass Camera Lens Protector,HD Clear Scratch Resistant Bubble Free Anti-Fingerprints LinQuidSkin TPU Film : Cell Phones & Accessories
www.amazon.com
basilray said:
I went w/ this, and was pleasantly surprised. One caveat, it doesn't have a cutout for the front facing camera.
Interesting install as well - they give you a tab that slots into the USB-C port to hold the film in place while you press it smooth/remove bubbles w/ the included squeege. No spray needed/involved either. Feels good to the touch.
Amazon.com: [4 Pack] PULEN for OnePlus 9 Pro Screen Protector (2 Pack) with 2 Pack Glass Camera Lens Protector,HD Clear Scratch Resistant Bubble Free Anti-Fingerprints LinQuidSkin TPU Film : Cell Phones & Accessories
Amazon.com: [4 Pack] PULEN for OnePlus 9 Pro Screen Protector (2 Pack) with 2 Pack Glass Camera Lens Protector,HD Clear Scratch Resistant Bubble Free Anti-Fingerprints LinQuidSkin TPU Film : Cell Phones & Accessories
www.amazon.com
Click to expand...
Click to collapse
The pictures show a cutout for it?
MurphSAN84 said:
The pictures show a cutout for it?
Click to expand...
Click to collapse
I guess I didn't check all the films. Just noticed when installing the one I was using it wasn't cut for the camera.
It went on so nicely, that I didn't bother to pull it off. Seriously easy, no bubbles, creasing, or rainbowing.
Not sure if I'll keep the OP9P or go to an S21 Ultra, so I wasn't worried about the cutout for now.
Poloasis said:
I'll wait for the Whitestone screen protector.
Click to expand...
Click to collapse
This. After not ever trying one before, I bought one last year for my 8 Pro.
Best screen protector hands down, the touch response, protection, and overall quality are just unmatched. Expensive, but worth it
Do we know if white stone is even working on it for this phone? I see no mention of it coming.
Pvt WhoOkid said:
Do we know if white stone is even working on it for this phone? I see no mention of it coming.
Click to expand...
Click to collapse
Haven't seen any confirmation yet....
I've seen articles that state that with liquid glass screen protectors, you still run a risk of shattering the display itself, as opposed to tempered glass ones, though obviously with the latter you run the risk of the damn thing popping off....
So it's like... you're damned either way, lmao
Easy solution... just don't drop your phone (5head).
GuyInDogSuit said:
I've seen articles that state that with liquid glass screen protectors, you still run a risk of shattering the display itself, as opposed to tempered glass ones, though obviously with the latter you run the risk of the damn thing popping off....
So it's like... you're damned either way, lmao
Easy solution... just don't drop your phone (5head).
Click to expand...
Click to collapse
LOCA screen protectors are still tempered glass, just glued on.
Or if you want to be the safest just don't use your phone. Leave it in its box and move on. Everything has a level of risks. Temper glass, films or liquid. Whatever makes you feel safer.
So I was just going to buy a tempered glass protector for my new Poco F3 and then I saw they have one on already. What do you think? Should I just buy a thicker one and replace it or will it be good enough?
I replace it within 5 minutes i got the phone... Bad quality compared to those that is used on s21 series
keyoke87 said:
I replace it within 5 minutes i got the phone... Bad quality compared to those that is used on s21 series
Click to expand...
Click to collapse
Oh okay then will do. Thanks a lot man. Hopefully the one I choose isn't that bad.
There isn't a really need to change default screen protector.
Glass screen protectors are a commercial thing. It breaks every time you drop the phone and then makes you buy a new one thinking it protected the phone.
Just change the stock one if you have too many scratches on it. Or if you don't like fingerprints.. I feel it takes it a lot :s if I change, it's for thin plastic film not glass.
I replace the stock screen protector with a tempered glass and now the touch is a lot better. Also the feeling is smoother now. Stock screen protector is cheap.
I replaced mine. The stock screen protector is more vulnerable to scratches than a tempered glass. Mine had some scratches after a few days.
Yo
Nillkin Amazing H+ Pro tempered glass screen protector for Xiaomi Redmi K40, K40 Pro, K40 Pro Plus (K40 Pro+), Poco F3, Mi11i (Mi 11i), Mi11X, Mi 11 X Pro
Buy Nillkin Amazing H+ Pro tempered glass screen protector for Xiaomi Redmi K40, K40 Pro, K40 Pro Plus (K40 Pro+), Poco F3, Mi11i (Mi 11i), Mi11X, Mi 11 X Pro. Xiaomi Redmi K40, K40 Pro, K40 Pro Plus (K40 Pro+) - Nillkin Amazing H+ Pro tempered glass scre
nillkin.org
Best Glass Screen Protector Ull ever find. Even the Oleophobic Coating is on point.
Enjoy
Same here:
￡6.80 30%OFF | SmartDevil Full Cover Tempered Glass For Redmi Note 10 Pro Note10 5G K40 Screen Protectors For Xiaomi POCO F3 M3 X3 GT mi 11i HD
https://a.aliexpress.com/_uzkBMy
It comes with frame so it's really a piece of cake to put screen protector perfectly in place. I have it, everything ok so far. Oleophobic coat is also here. They also add a back plactick sticker. Nice thing, can cover your glass backplate too.
I just took mine off, screen protectors are kinda useless
stavrosbin said:
So I was just going to buy a tempered glass protector for my new Poco F3 and then I saw they have one on already. What do you think? Should I just buy a thicker one and replace it or will it be good enough?
Click to expand...
Click to collapse
The stock screen protector was peeling off in a month for me, so I switched to Gadgetshieldz screen protector which I've been using for 6 months and It is very efficient and gives good protection against scratches.
A good case should be your primary display protection from impact. Slightly raised guards on all sides.
The display needs protection from scratches otherwise it will get scratched. Sand easily scratches any display. Keep the factory one on until it gets ratty and/or you have a replacement.
Hydrocell wet apply TFF ones like Gorilla IQ Sheild work well, are dirt cheap, relatively easy to apply and can last 6+ months.
Hi all,
I have a few questions around tempered glass screen protectors for curved screens like the Pixel 6 Pro, I was wondering if people had any answers to:
Are there any known brands that do good quality curved tempered glass screen protectors?
Has anyone seen any tempered glass screen protectors for the Pixel 6 Pro that follow the curved edge of the screen
How well do these fit on phones that have cases (I'm looking at spigen rugged armor and have noticed in the past that some screen protectors don't fit properly with the case)
Any input would be appreciated as I want to make sure my Pixel 6 Pro is properly protected from scratches and falls.
At the moment, do not buy a glass screen protector. Where is the screen of the Pixel 6 Pro curved? Until a high-quality curved protection is made
I can recommend this
Amazon.com: ArmorSuit [2 Pack] MilitaryShield Screen Protector Designed for Google Pixel 6 Pro (2021) Case Friendly Anti-Bubble HD Clear Film : Cell Phones & Accessories
Amazon.com: ArmorSuit [2 Pack] MilitaryShield Screen Protector Designed for Google Pixel 6 Pro (2021) Case Friendly Anti-Bubble HD Clear Film : Cell Phones & Accessories
www.amazon.com
And
Amazon.com: LK [2+2 Pack] 2 Pack Screen Protector Design for Google Pixel 6 Pro 6.71-inch + 2 Pack Camera Lens Protector, Self-Healing TPU Film for Pixel 6 Pro, Ultra-Thin, HD, [Not for Pixel 6], Bubble-Free : Cell Phones & Accessories
Buy LK [2+2 Pack] 2 Pack Screen Protector Design for Google Pixel 6 Pro 6.71-inch + 2 Pack Camera Lens Protector, Self-Healing TPU Film for Pixel 6 Pro, Ultra-Thin, HD, [Not for Pixel 6], Bubble-Free: Screen Protectors - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Just this morning this chick was standing next to me on the train and she had a phone with on-scree fingerprint reader and a screen protector. It looked ugly as ѕhit, because there was a hole for the fingerprint.
I haven't used screen protectors in years now. I just don't put my phone in the same pocket as keys and it's good as new.
goddammit said:
Just this morning this chick was standing next to me on the train and she had a phone with on-scree fingerprint reader and a screen protector. It looked ugly as ѕhit, because there was a hole for the fingerprint.
Click to expand...
Click to collapse
I'm using a Whitestone Dome Glass on my OnePlus 7T Pro McLaren and there is no hole, where the FPS is...
And there's also no problem with the finger print reader with the applied Dome Glass.
So I really do hope that there's going to be a Dome Glass also for the Pixel 6 Pro (in the past Whitestone always hat a Pixel Dome Glass available...)
stetre76 said:
I'm using a Whitestone Dome Glass on my OnePlus 7T Pro McLaren and there is no hole, where the FPS is...
And there's also no problem with the finger print reader with the applied Dome Glass.
So I really do hope that there's going to be a Dome Glass also for the Pixel 6 Pro (in the past Whitestone always hat a Pixel Dome Glass available...)
Click to expand...
Click to collapse
I heard many horror stories from people that had to remove the remains of Dome Glass after a drop (shattered, couldn't be removed in one piece). Did that ever happend to you? I planned on using Dome Glass for a while now, but it's quite expensive and I am not really looking forward to damaging my original display whilst trying to remove the debry of the protecting glass...
Any reason why you couldn't put a 6 tempered glass on the 6 Pro? pretty much the same size. You wouldn't want it to go past the curved edges anyway.
ridobe said:
Any reason why you couldn't put a 6 tempered glass on the 6 Pro? pretty much the same size. You wouldn't want it to go past the curved edges anyway.
Click to expand...
Click to collapse
You would have a pretty sizable area around the screen protector that doesn’t come up to the case edge. Leaving room for dust to accumulate. Also the selfie camera cut out wouldn’t line up right.
I ordered this one: https://www.spigen.com/products/pixel-6-pro-screen-protector-neo-flex
I know Spigen makes great cases but never tried their screen protector. It's not tempered glass but it was (only) 11 euros on Amazon. In the worst case, if reviews are bad, I'll send it back.
Edit: read some reviews about the same ones for other phones, they don't seem great. I canceled my order for now. We'll see what becomes available next week.
I just bought some LK film screen protectors off of Amazon. I've had good luck with them in the past and the install method they use works great. I might go Whitestone or similar later on after I see some reviews. I had used Whitestone before in the past but from what I've been reading it seems the quality of the glass isn't what it used to be. IDK anybody used a Whitestone lately?
Morgrain said:
I heard many horror stories from people that had to remove the remains of Dome Glass after a drop (shattered, couldn't be removed in one piece). Did that ever happend to you? I planned on using Dome Glass for a while now, but it's quite expensive and I am not really looking forward to damaging my original display whilst trying to remove the debry of the protecting glass...
Click to expand...
Click to collapse
Before I sold my Pixel 2 XL I removed the Dome Glass and that was absolutely no problem.
The Glass came off very easy and the glue sticks to the Dome Glass not the Smartphone Screen.
I also had to replace the Dome Glass on my OnePlus (my fault) and there I didn't have any problems either - the glue sticks to the Dome Glass, the Display remains absolutely clean...
Can't really imagine on how to "kill" the display when removing the Dome Glass...of course, if you're usin a kniw or a screw-driver or any other inapproriate tool...
I'm going with the Ringke Dual Easy Wing. The film curves around and covers the edges and it has stayed pristine for the 1 year I've had it on my Note 20 ultra.
dj24 said:
I'm going with the Ringke Dual Easy Wing. The film curves around and covers the edges and it has stayed pristine for the 1 year I've had it on my Note 20 ultra.
Click to expand...
Click to collapse
Do you use cases on your phone? If so does it work well with them?
dj24 said:
I'm going with the Ringke Dual Easy Wing. The film curves around and covers the edges and it has stayed pristine for the 1 year I've had it on my Note 20 ultra.
Click to expand...
Click to collapse
is this avail for the 6 Pro?
I ordered the ArmorSuit MilitaryShield Screen Protector and see how it does. I may order a protector for the camera lens but I see nothing I like right now.
I ordered the curved Imak 3D Tempered Glass Screen Protector, it will arrive in mid-November.
https://www.aliexpress.com/item/1005003174564311.html
Been rocking my Pixel 5 w/o a screen protector since purchase. Don't think I'll use one for my Pro.
dimm0k said:
is this avail for the 6 Pro?
Click to expand...
Click to collapse
I didn't see the Ringke on their website.
A few things to answer earlier posts:
Whitestone is REALLY easy to remove, even after it shatters. Worst case you can scrape it all up with a business card. The adhesive is more like rubber cement than a hard glue.
Tempered glass protectors with a hole in them are straight up garbage. Avoid them
The Pro has an Optical sensor, any issues that Samsung users had with tempered protectors don't apply here. Optical sensors work GREAT with LOCA based UV tempered glass protectors. My Oneplus 9 Pro has an Optical sensor and I have the whitestone (and used Aliexpress $3 loca based protectors), they all work fine. The main difference is the quality of glue used, the cheaper ones pull up like crazy after a few weeks.
I ordered a Spigen 2 pack but I am no expecting much, might go Whitedome this time. Curved displays are a ball ache.
I brought this and it arrived a week ago. The glass is curved: https://www.amazon.com/gp/aw/d/B09FL6GTHJ?psc=1&ref=ppx_pop_mob_b_asin_title
I can take a picture of the glass if anyone wants. I however haven't tried it on the phone (since mine won't ship till early Nov), so I don't know how good it is. But the edges are curved.
I ordered 2x Magglass Tempered Glass Designed for Google Pixel 6 Pro Screen Protector (2021) UHD Full Coverage Display Guard (Case Compatible), so I'll give a review when I get the phone and put it on. It was either the sole tempered glass one I could find or one of only a couple. I've never used this brand although I've heard of them and seen them.
By the way, on my Samsung Galaxy Note 10+ 512 GB (which I love the hardware but hate the software, having come from the Pixel 1), I bought the Note 10+ phones for my wife and I a year and a half ago, and it took a while to receive a screen protector. I dropped that phone at least 10 times before I also received an Otterbox Defender, since a lot of stuff was getting delayed. That phone is just so slippery without a case (I know, this is a screen protector thread).
I'm so glad the screen wasn't damaged before I got the protector on it. The phone came with something basic already on the screen that wasn't really a protector, but it might've helped keep it from damage until I got the rest of my accessories.
Hey! I'm looking for a screen protector compatible with a case, so far I've found Spigen Air Liquid + NeoFlex but I hate the NeoFlex feel (I'm not using it in the Pixel 6 Pro but I've used it in my Huawei P20 Pro).
Has anybody tried another combination that works well?
I just fitted a 'Uniqueme' soft screen protector. Goes on really easily and works fine with my spigen rugged armor case. I've got a neoflex sitting here but probably wont use it. The uniqueme also comes with a glass cover for the camera, but you cant use it due to glare with the flash.
antoniovj1 said:
Hey! I'm looking for a screen protector compatible with a case, so far I've found Spigen Air Liquid + NeoFlex but I hate the NeoFlex feel (I'm not using it in the Pixel 6 Pro but I've used it in my Huawei P20 Pro).
Has anybody tried another combination that works well?
Click to expand...
Click to collapse
I bought the Spigen ultra hybrid clear case and Gadgetshieldz screen guard for my Pixel 6 pro and my phone looks as it is because I love the back of my phone, and this works well!
Just wanted to report that I installed the Mowei tempered glass Here on my pixel 6 pro with my otterbox defender pro case and had no problems with install (no lint or bubbles) **** make sure you watch the install video 2-3x They fit like a glove. Highly recommend the Mowei. and otterbox for rugged protection
My Pixel 6 Pro is wearing Rhinoshield case and rhinosield screen protection.
Hi. I using : X-level Google Pixel 6 Pro Case [Earl 3 Series] and TAURI Flexible TPU Film Screen Protector.
Love the case and film easy to apply.
I'm wearing a Pelican suit on my 6 pro since my island is scarce in cases. Ordered a whitestone dome for 31.50 shipped. I'll let you know how the case and TG works out in a few days.
Whitestone dome and Spigen case, perfect combination
acidspider said:
Whitestone dome and Spigen case, perfect combination
Click to expand...
Click to collapse
What Spigen are you using?
avid_droid said:
What Spigen are you using?
Click to expand...
Click to collapse
Rugged armour case
Whitestone dome and Pelican works perfectly. Although,the Pelican case is a bit flimsy on the edges. Kinda feels like a rhino shield case to be honest. Awaiting my Dbrand Grip
Has anyone got a good screen protector that fits the Google 6 Pro official case?
mightywhites29111971 said:
Has anyone got a good screen protector that fits the Google 6 Pro official case?
Click to expand...
Click to collapse
Yes, I got a case-fit screen protector from Gadgetshieldz and it fits perfectly with the back case!
I can recommend the LK display protector. It works without issue, FP works outside the box, installation was easy (I got the version where you put a small accessory in the USB-C slot with three little knobs on top, to attach the panel for orientation). It works with every case that I have and covers the curved sides perfectly (mind though that it's a plastic protector and NOT glass).
randylahey786 said:
Yes, I got a case-fit screen protector from Gadgetshieldz and it fits perfectly with the back case!
Click to expand...
Click to collapse
Was it this one?
Google Pixel 6 Pro Screen Protectors, Scratch Guards | Gadgetshieldz®
Shield your Google Pixel 6 Pro with the very best in self-healing screen protection.The texture on the skin makes it resistant to fingerprints or smudges. Our full body protectors are super-tough but ultra-thin.
www.gadgetshieldz.com
mightywhites29111971 said:
Was it this one?
Google Pixel 6 Pro Screen Protectors, Scratch Guards | Gadgetshieldz®
Shield your Google Pixel 6 Pro with the very best in self-healing screen protection.The texture on the skin makes it resistant to fingerprints or smudges. Our full body protectors are super-tough but ultra-thin.
www.gadgetshieldz.com
Click to expand...
Click to collapse
Yeah, I got it for $10 with the body protector and it's worth it because the scratches heal on this protector which is amazing!!!
Morgrain said:
I can recommend the LK display protector. It works without issue, FP works outside the box, installation was easy (I got the version where you put a small accessory in the USB-C slot with three little knobs on top, to attach the panel for orientation). It works with every case that I have and covers the curved sides perfectly (mind though that it's a plastic protector and NOT glass).
Click to expand...
Click to collapse
I saw the video and it arrived last night. Will stick it on when I get home from work today!
Mowei screen protectors are amazing quality and price, better than whitestone ive used before. i paired mine with a cyrill tpu case and the fit is perfect....
Would you have a link to Mowei screen protector as I can't find them anywhere. Thank you
gie62001 said:
Would you have a link to Mowei screen protector as I can't find them anywhere. Thank you
Click to expand...
Click to collapse
Here you go