This Lineage Os 14.1 rom
To use s pen sensor script, you have to install root app like Magisk.
The kernel uses swapfile in data partition , you can adjust swappiness by editing the "01swappiness" file in /etc/init.d/01swappiness , I set default to 10.
Now, AEC had been added to voice call, the far-end will no longer have echo.
But have to test more on AEC.
BUILT LOG
Last Update: All codes up to date 14/02/2021
Built Log: Update up to date 16/02/2021
16/02/2021 Voip on bluetooth is not working any more
16/01/2020
Fixed audio Hal and Kernel for Bluetooth communication like Line, Skype, and Messenger. Now bluetooth works perfectly both up and down stream.
16/07/2019
Fixed spen-detection script and make it runs with less power.
04/06/2019
Update source code and fixed spen-detection script.
24/02/2019
Update audioeffect and Enable and improve Voice call AEC.
21/02/2019
update hal path and adjust volume not to loud
update kernel , on some fs.
Built Log: Update up to date 4/1/2019
This version update the s pen input sensor to enable/disable touch screen input when using s pen.
ROM:
Lastest version:https://cloud.degoo.com/share/Q1A-1zzZ5Fdpf2cKTohNig
Features:
All working, with auto voice call recording for every call.
First time just enable voice call recording, on incall ui click record, and give permission, to record. Then after end call set the autorecording . On next call it will autometically record all call.
Now Bluetooth voice communication work perfectly on Line, Skype, Messenger.
Khomsn
Source: https://github.com/lineageos
Kernel: https://github.com/khomsn/android_kernel_samsung_v1a3g
Device:https://github.com/khomsn/device_samsung_v1a3g
vendor:https://github.com/khomsn/vendor_samsung_v1a3g
Thanks for the effort, i have the following questions:
Is it rooted?
Can i dirty flash it on the unofficial 7.1.x?
Is the phone call voice transmission working both ways , meaning the person on the other side of the e call can actually hear you, as this is the current issue with 7.1.x?
yamosaad said:
Thanks for the effort, i have the following questions:
Is it rooted?
Can i dirty flash it on the unofficial 7.1.x?
Is the phone call voice transmission working both ways , meaning the person on the other side of the e call can actually hear you, as this is the current issue with 7.1.x?
Click to expand...
Click to collapse
1. Yes ready for root, you can use any root tool like SuperSU or Masigk.
2. Yes you can but clean flash is better.
3. yes both ways on speaker/headset/bluetooth
and recording is clear both ways.
Try it.
Thank you for work. I have a problem with S-pen. Spen working good only when my palm is above the screen, when palm lying down on the screen, spen doesn't working at all. With this issue it's impossible to use spen comfortably.
grigoras said:
Thank you for work. I have a problem with S-pen. Spen working good only when my palm is above the screen, when palm lying down on the screen, spen doesn't working at all. With this issue it's impossible to use spen comfortably.
Click to expand...
Click to collapse
Now I have updated my build so Touchscreen Input will be disabled when S-pen is near by the screen and will be enabled when S-pen is far away. So we can use spen confortably NOW:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:.
Will Share on Finished next built
thanks, man for this wonderful rom. pls, how do I install google apps?
9ja Droid boy said:
thanks, man for this wonderful rom. pls, how do I install google apps?
Click to expand...
Click to collapse
TWRP, Go to recovery and install gapps.zip
khomsn said:
TWRP, Go to recovery and install gapps.zip
Click to expand...
Click to collapse
OK.. I don't know the right Google app to download I tried flashing the one I downloaded I got an error "not compatible that I should download the right app" pls can u help me with the right link?
9ja Droid boy said:
OK.. I don't know the right Google app to download I tried flashing the one I downloaded I got an error "not compatible that I should download the right app" pls can u help me with the right link?
Click to expand...
Click to collapse
https://opengapps.org/
please select, Platform:ARM, Android:7.1, any Variant: from Aroma to Pico.
khomsn said:
https://opengapps.org/
please select, Platform:ARM, Android:7.1, any Variant: from Aroma to Pico.
Click to expand...
Click to collapse
Appreciated bro..
New Update on GDrive Now.
New update with Voice call AEC
i got black blank screen after flash with twrp. what should I do? Please help
mejonay said:
i got black blank screen after flash with twrp. what should I do? Please help
Click to expand...
Click to collapse
Reboot to twrp, wipe cache , check and fix system+data partition then reboot
Hi, thanks for this ROM, I'm planning to install it this weekend on my device.
Just a quick question, though: what is the difference between this one and the one here: https://forum.xda-developers.com/galaxy-note-pro-12/development/rom-7-1-xsm-p901-unofficial-lineageos-t3576054?
indotoonster said:
Hi, thanks for this ROM, I'm planning to install it this weekend on my device.
Just a quick question, though: what is the difference between this one and the one here: https://forum.xda-developers.com/galaxy-note-pro-12/development/rom-7-1-xsm-p901-unofficial-lineageos-t3576054?
Click to expand...
Click to collapse
That is the old post , which was locked by idiet Admin.
khomsn said:
That is the old post , which was locked by idiet Admin.
Click to expand...
Click to collapse
Uh...I am the OP of that post and it is not locked!
gcrutchr said:
Uh...I am the OP of that post and it is not locked!
Click to expand...
Click to collapse
Sorry miss understand:crying:
New update, previous built SPen script is broken.
Hi, my device are SM-P901, and I cannot flash to this custom ROM.
When flashing, it says like this in TWRP:
patched image unconditionally
unknown command (log) (with red line on it)
Can you help me? I really want to boot it to LineageOS..
Thank you before
Related
LineageOS 14.1 for Samsung Galaxy S6 Edge PlusAfter a long time of waiting, the Lineage OS for Samsung Galaxy S6 Edge Plus is here
Compatibility: G928F/7/C (others need to be tested for now)
Features:
Lineage OS 14.1
Android 7.1.1
Softkeys WORK
Android security patch level: 5.03.2017
A lot that i dont remember
Instructions:
1. Flash Zip in TWRP
2. Flash Gapps
3. Enjoy
Download links
Mega: https://mega.nz/#!EoAmRCqK!zp_rhgbF9BEsGJIUtCANf0cIAdLR4ghYso9L-_KyLLg
Changelog:
Initial Version
Bugs:
Please report bugs in PM
Source Codes:
https://drive.google.com/open?id=0B7Qjhc9cZQkCV3BNUEV6Zm5yekk
Telegram Group:
https://t.me/joinchat/AAAAAEJyrL36j8D7qfgQPg
Donations:
If anyone want to donate for my work, which is made in my free time, here is the donation link: paypal.me/lucastanciu
Credits:
@muffinsmuffy for helping me to fix the softkeys
If i forgot someone please PM
Testing on G928G.....
cjunior_1091 said:
Testing on G928G.....
Click to expand...
Click to collapse
Let me know how it goes ) Btw select ARM64 Gapps Android 7.1
I'm using the G928G. It's very smooth for now. Every once in a while she freaked out in the animations, but it was only a restart that stopped. Now I will check the battery drain.
* Sorry for my bad english, i'm from Brazil.
Hello, Nice work
I can't activate the data on my G928F (Orange France)
Do you have a idea of the problem.
The_Gorgutz said:
Hello, Nice work
I can't activate the data on my G928F (Orange France)
Do you have a idea of the problem.
Click to expand...
Click to collapse
Do what i say:
Go to Settings-more-mobile networks Point of acces name or whatever and then select one.
Btw hows the rom working for u guys? Someone encountered any bug?
Only thing i found, is not a bug, but the video camera only records at max 1080p. Everything else is fine for me.
I tested more today and i tell you if i find something.
Thanks!
25/04/2017
Installing on my G928F.
Thanks a lot for working on this rom for our devices!
26/04/2017
I've tested a little and the rom is excellent! I have only one issue with Youtube app that the video screen is always black. Maybe a problem of the GApps.
Everything perfect except the battery life that is a bit short. However it is the first version so, congratulations.
lucastanciu said:
Do what i say:
Go to Settings-more-mobile networks Point of acces name or whatever and then select one.
Btw hows the rom working for u guys? Someone encountered any bug?
Click to expand...
Click to collapse
I have try but nothing ? I try to reinstal the ROM
For me the ROM work realy great (just one restart of the phone after the configuration)
The_Gorgutz said:
I have try but nothing ? I try to reinstal the ROM
For me the ROM work realy great (just one restart of the phone after the configuration)
Click to expand...
Click to collapse
Try to search orange france apns on google and then insert it in settings
Small bug found, when the phone is charging with a fast charger it says "Slow charge" but is not the case
The_Gorgutz said:
Small bug found, when the phone is charging with a fast charger it says "Slow charge" but is not the case
Click to expand...
Click to collapse
Thanks
lucastanciu said:
Thanks
Click to expand...
Click to collapse
I'm sorry to disappoint you Luca.....I can't find any flaws at all...works like a f*****g Swiss watch:laugh:
I had almost given up on a functional AOSP for the E+. But this is a true contender to TW, no doubt. Great work!
If only someone figured out the right algorithms for the camera, life would be perfect. Maybe we should put Luckman on porting the Pixel XL camera to Lineage:laugh:
thools60 said:
I'm sorry to disappoint you Luca.....I can't find any flaws at all...works like a f*****g Swiss watch:laugh:
I had almost given up on a functional AOSP for the E+. But this is a true contender to TW, no doubt. Great work!
If only someone figured out the right algorithms for the camera, life would be perfect. Maybe we should put Luckman on porting the Pixel XL camera to Lineage:laugh:
Click to expand...
Click to collapse
Ill resolve camera in the future
Can I choose between root and non-root?
And where i can download gapps?
Reika-chan said:
Can I choose between root and non-root?
And where i can download gapps?
Click to expand...
Click to collapse
Yes you can. And Open Gapps works fine.
http://opengapps.org/
thools60 said:
Yes you can. And Open Gapps works fine.
http://opengapps.org/
Click to expand...
Click to collapse
Tks, I use the G928C, how should I choose Platform Android Variant?
Reika-chan said:
Tks, I use the G928C, how should I choose Platform Android Variant?
Click to expand...
Click to collapse
×64, 7.1.1
I can't open flac music file, also camera not work
G928C
great work...
how can i make it work on dual sim, i got g9287
Hey!
We've published our LineageOS 14.1 for everyone. You can found ROMS in Team Superluminal website.
Thanks and enjoy!
ekkilm said:
Hey!
We've published our LineageOS 14.1 for everyone. You can found ROMS in Team Superluminal website.
Thanks and enjoy!
Click to expand...
Click to collapse
Many thanks for your work :good:
We just recognize that the Safetynet compatibilyty is broken. But no worries. We’ll release update soon where that will be fixed.
And…
IR blaster will work too. ?
Stay tuned folks!
Good job
ekkilm said:
We just recognize that the Safetynet compatibilyty is broken. But no worries. We’ll release update soon where that will be fixed.
And…
IR blaster will work too.
Stay tuned folks!
Click to expand...
Click to collapse
Flashed and running well. :good:
I do not have VoLTE though. Hope that is added in the future. Everything else running smooth. Going to keep stay on this ROM for a bit.
Thanks for sharing!
ROM UPDATE
-Fixed SafetyNet compliancy
-Fixed IR Blaster
Edit.
Update is also available via OTA, so check your updaters!
Would it be possible to provide a ZIP to get IR working also for users of the "vanilla" LOS 14.1 weekly builds? Or will that not work due to missing kernel requirements?
Thanks for your rom!! Why you didnt create this post in the rom section?
What's the difference between this and stock LineageOS 14.1?
chemicalboyxda said:
Thanks for your rom!! Why you didnt create this post in the rom section?
Click to expand...
Click to collapse
Because we have our own forum in TS site. This is just a note/info that we've published our build
darkmuck said:
What's the difference between this and stock LineageOS 14.1?
Click to expand...
Click to collapse
Try and see
darkmuck said:
What's the difference between this and stock LineageOS 14.1?
Click to expand...
Click to collapse
Some minor tweaks.
For example:
- SafetyNet compliant by default (banking apps, etc.. works)
- Easy root install/uninstall in ROM Extra Settings
- IR Blaster works
- No cracking audio
- Prevent accidental wakeup works (also when waking w/ fingerprint)
- Browser that actually works by default (SWE Browser)
- Better snap camera by default (OmniRom snap)
- OTA
Probably forgot something..
I have a few questions about this ROM since I had installed a ROM from Lineage OS website (lineage-14.1-20170512-nightly-zl1-signed) yesterday and it has bugs in the most basic and essentials things... The most ridiculous bug is the phone app that doesn't show the call screen when I try to call someone or when I receive a call from someone, it only shows the notification that I missed my call... And my camera stopped working after I change the resolution to a higher one, that was currently available... I had managed to fix that after I installed an app called open camera from Play Store.
Besides that I loved the ROM it self since it was my first time trying a Lineage OS ROM, but before I try to flash the one that you have in your website I would like to know if there are any bugs related to the phone calls, alarm clock, music player and notifications...
Thanks in advance
rijrg4 said:
I have a few questions about this ROM since I had installed a ROM from Lineage OS website (lineage-14.1-20170512-nightly-zl1-signed) yesterday and it has bugs in the most basic and essentials things... The most ridiculous bug is the phone app that doesn't show the call screen when I try to call someone or when I receive a call from someone, it only shows the notification that I missed my call... And my camera stopped working after I change the resolution to a higher one, that was currently available... I had managed to fix that after I installed an app called open camera from Play Store.
Besides that I loved the ROM it self since it was my first time trying a Lineage OS ROM, but before I try to flash the one that you have in your website I would like to know if there are any bugs related to the phone calls, alarm clock, music player and notifications...
Thanks in advance
Click to expand...
Click to collapse
We haven't face those kind of issues in our rom Sounds pretty strange issues overall. Did you do full wipes before installation? What gapps? Any mods?
I recommended you to check our site, download the rom and READ install instructions before installation. Those are the basic steps for rom/gapps installation.
I installed today. The first problem that i have is that the root option of this rom didnt work right. I have to manually install supersu to get root.
Second the adaptative brigthness didnt work ok, like other 7.1 roms.
Third i installed in a x727 and the signal is weak. I installed the modem version of the 19s rom but didnt change. I selected LTE/WCDMA, the same.
And the last one and for me is a problem, its that CDLA headphones didnt work. I get the sound over the speaker of the phone.
Sorry for my english.
chemicalboyxda said:
I installed today. The first problem that i have is that the root option of this rom didnt work right. I have to manually install supersu to get root.
Second the adaptative brigthness didnt work ok, like other 7.1 roms.
Third i installed in a x727 and the signal is weak. I installed the modem version of the 19s rom but didnt change. I selected LTE/WCDMA, the same.
And the last one and for me is a problem, its that CDLA headphones didnt work. I get the sound over the speaker of the phone.
Sorry for my english.
Click to expand...
Click to collapse
No no no no... And no supersu.. read the FAQ. There is a guide how to enable root. It is addonSU
ekkilm said:
No no no no... And no supersu.. read the FAQ. There is a guide how you enable root. It is addonSU
Click to expand...
Click to collapse
?? Easy root (install/uninstall in ROM Extra Settings)
And the cdla??
chemicalboyxda said:
?? Easy root (install/uninstall in ROM Extra Settings)
And the cdla??
Click to expand...
Click to collapse
1. Still that is pretty easy, you just have to enable it.
2. Unfortunately we don't have CDLA headphone for now so we're unable to test it. But we might bought those so we can maybe fix it in the future.
ekkilm said:
1. Still that is pretty easy, you just have to enable it.
2. Unfortunately we don't have CDLA headphone for now so we're unable to test it. But we might bought those so we can maybe fix it in the future.
Click to expand...
Click to collapse
1. I did that but when the phone reboots root not present. I have to install manually.
2. Thanks!
chemicalboyxda said:
1. I did that but when the phone reboots root not present. I have to install manually.
2. Thanks!
Click to expand...
Click to collapse
So you did with this guide TS FAQ?
This is my first time sharing any of my work so hopefully all goes well. This is not original development, i took parts from several other roms, combined them, took out all the stuff i felt wasn't needed. and then i went through and worked on some of the camera pipeline errors and java coding to fix some of the null and parse errors related to the camera, it works ok now but still has bugs, most can be avoided by lowering resolution from 4k to 1080p. I also included pear launcher from XDA labs by xda member @yajat, as well i included RunInBackgroundSetter by xda member @MrBIMC. I would like to thank the Lineage (blackbugga mostly but the whole team) and Nexus team, This rom was taken from s6 lineage 15.1 OS along with NexusOS and AOSP. I also included opera browser instead of chrome or firefox as its my preference. I used a couple of apps from the XDALabs because a lot of people put in a great deal of time and work to develop their own apps and tweaks and i thought it would be nice to give them a little love. I will add more over time in future builds, however i don't want the rom to become bloated or bulky, my goal was to keep it simple and straight forward and let the user add their own extras. I have tested xposed and gravitybox oreo on this and they work well. magisk also works, however i included superuser because its my go to, if you want the magisk modules by all means use magisk. i do however advise flashing it before first boot. there is also a no nfc patch, a kernel/camera patch and a no verity patch. All must be flashed before the first boot or it will not boot. use the included background restrictor to kill apps that you feel don't need to run when you are not using it so save battery life, you can also lower cpu with kernel auditor(download from play store). so far i have not discovered many bugs besides the camera. battery life is not too bad. my wifi works, data works, calls are working, sms works. This build includes the oreo API(obviously) and will allow you to play with things that only work on Oreo. If you use magisk there is a module for oreo only to fix some libraries, you may want to install it. for Viper4Android to work you need to install the magisk audio libs module. I am a programming student and very busy, but i will work on this in my spare time and add a few things here and there, the V1 zip is uploading to mega now. i will post the link when it finishes. it is for zenltecan s6 edge plus variant. I will also put up a version for other s6 variants shortly. please let me know of any bugs or issues, any thoughts, ideas, suggestions, or comments. look forward to hearing from you all. You would not believe how many times i had to flash and reflash my device to get this going properly lol. There will be an unofficial gapps on the mega too. flash that before first boot also. I will post some screenshots once i get back into my phone in a few moments, look for them in post 2. I did the Canadian variant first because i wanted to let Canada be the first to get a rom for once I also enabled the data/app directory.
Downloads in post 3. The device specific roms are in folders. i can only test on zenltecan, i need others to test zenlte and zerofltexx, ,any help is greatly appreciated.
zenlte:
https://mega.nz/#F!aaIDmT5D!FG9QpMYPcNCjlDiIkGCX4g
zenltecan:
https://mega.nz/#F!WH5w3bBC!tUea4d0a_Gj4oaU8g98ohQ
zerofltexx:
https://mega.nz/#F!aDoCVCzZ!78XMp7ci317JLP7mvv96Nw
zenltetmo:
https://mega.nz/#F!7WpBCAYQ!dBlO2_fdJmO2OlPRLrzL-A
is the link, all roms are seperated by folder. ensure you get the no verity zip, the kernel/cam zip, the nfc zip, super user zip and unofficial 8.1 gapps zip.
Appreciate your work, let me know which on is for G-928T, American variant.
showkeys said:
Appreciate your work, let me know which on is for G-928T, American variant.
Click to expand...
Click to collapse
Zenlte should work. If not let me know and i will make a zenltetmo. Zenlte is just generic american
godkingofcanada said:
Zenlte should work. If not let me know and i will make a zenltetmo. Zenlte is just generic american
Click to expand...
Click to collapse
None of work on G-928T, it is really good to see if you can build one for tmobile variant, thanks.
showkeys said:
None of work on G-928T, it is really good to see if you can build one for tmobile variant, thanks.
Click to expand...
Click to collapse
Yeah, i just have to change the assert from zenlte to zenltetmo because twrp will reject the zip and tell you that its zenlte and your device is zenltetmo. In canada all carriers are zenltecan. I will add it to the first post in an hour or so. Its building now
godkingofcanada said:
Yeah, i just have to change the assert from zenlte to zenltetmo because twrp will reject the zip and tell you that its zenlte and your device is zenltetmo. In canada all carriers are zenltecan. I will add it to the first post in an hour or so. Its building now
Click to expand...
Click to collapse
Thanks for the quick upload, I try zenltetmo, all works fine but the major problem is still remain, there is no in call voice on both sides.
showkeys said:
Thanks for the quick upload, I try zenltetmo, all works fine but the major problem is still remain, there is no in call voice on both sides.
Click to expand...
Click to collapse
my call audio works on g928w8. I will look into the issue. Give me a bit of time. I will pull the libs from s6 lineage 15.1 and put it into a zip. I tried on my s6e+ sprint and call audio doesnt work. Unless i have 7.0 as primary and i dual boot 8.1. Then it works. Leading me to believe thats its the same issue as many other roms have. Ril. Call audio libs arent copied properly. Possibly due to it being aosp. I have 8.1 running on s7 also with camera bug, ril working
which one is for G928f?
my call audio fix G928T zenltetmo
blackbravo said:
which one is for G928f?
Click to expand...
Click to collapse
zenlte
bryan.stelios said:
my call audio fix G928T zenltetmo
Click to expand...
Click to collapse
Let me know how you fix it, mine G-928T still have in call voice problem.
Is wifi working on G928f?
Hi Everyone!
Since Oreo update on S8, the "Ok google" from screen off feature started to work.
Can anyone with this rom please try this, and confirm if "ok google" feature can wake our S6e+?
This should be possible in theory, since "Hi galaxy" can wake it. And I was thinking that on S8, only Bixby could wake the phone, and now "Ok google" can do it too..
Thanks!!
To fix T-Mobile call audio, give this a try.
(Works on N)
rhetorician said:
To fix T-Mobile call audio, give this a try.
(Works on N)
Click to expand...
Click to collapse
Thanks but after installing that fix my phone won't wake up, without this it boot the system with no in call voice issue.
showkeys said:
Thanks but after installing that fix my phone won't wake up, without this it boot the system with no in call voice issue.
Click to expand...
Click to collapse
Damn. Must only work on 7.0 roms (I've used it on many to fix this very problem). Maybe OP can examine the zip I uploaded to see if it could be converted to 8.1.
zenlte
blackbravo said:
which one is for G928f?
Click to expand...
Click to collapse
seems zenlte is for the SM-G928F per the above conversation.
Thank you for this awesome rom dev. Everything works apart from bluetooth. Iam on international G928f version. Please carry on your great work!
I'm not responsible for any damage to your device.
By flashing this you take responsibility of anything that happens to it.
Process at your own risk!
AND FEEL GOOD!
Now it is time to upgrade our P901 to Android 10 QWork
Almost all, I thinks but please give a feedback for any problem and suggestion.
Now P901 can make gsm call / sms / full cellular network.
BT SCO voice call working perfectly on narrow/wide band.
Preinstall v4afx to data partition and working good.
Camera (internal app) can take picture only now.
Video recorder working with app ,like HedgeCam 2, which supports Camera2 API.
Known Issues
- Video recording not working
- S-pen randomly freeze and reboot, still.
- Feedback sound enable will breaks Sound system, Don't enable any feed back sound.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Full wipe all
4. Flash firmware and gapps
Sources:
https://github.com/Lineageos
https://github.com/LineageOS/android_hardware_samsung
https://github.com/LineageOS/android_hardware_samsung_slsi_exynos
https://github.com/LineageOS/android_hardware_samsung_slsi_exynos5
https://github.com/khomsn/android_hardware_samsung_slsi_openmax
https://github.com/khomsn/android_hardware_samsung_slsi_exynos5420
Kernel: https://github.com/khomsn/android_kernel_samsung_v1a3g
Device: https://github.com/khomsn/device_samsung_v1a3g
Vendor: https://github.com/khomsn/vendor_samsung_v1a3g
THANKS & CREDITCredit to All developers that do share codes to our community and Thank to all of them and you , that makes this ROM.
Spacial Thanks to Valera1978 and ShevT for his kernel base / device prototype.
Spacial Thanks to universal5433 for device prototype.
Credit to v4afx developer viper4android
ROM DOWNLOAD / Change Logs go to Post # 2.
Download ROM Here16/11/21 Last update (11/11/21 broke the bluetooth sco) now fixed.
Spen still random freeze and reboot.
Don't enable Touch sound , it will break sound system.
11/11/21 Working Camera, and Auto Call Recorder (if it is allowed in your area)
now preinstall ViperFx , Galaxy Store , to Data partition if it not yet install,
Spen is fixed ( I hope , Thanks to ShevT for fixed, I applied his patch so, he said no more freeze and reboot).
31/8/21 ViperFx work
Remove Viper4Android for preinstall but still include lib, you must install Viper4Android , I use this package and it work, viperfx_2.7.2.1.apk . This version you can Change , cpu governor, swappiness, mount-bind ext sd card folder to internal folder.
Spen is same issue , also the Camera.
15/6/21 update BT SCO voice calling, IR and Samsung audio.
This built, update BT SCO driver hal to enable voice call both gsm and voip. IR is working perfectly now. Audio less plop sound or XRUN less.
Replace pre-audioprocessing with android lib -> no echo on caller side when using voip now.
27/4/21 with Samsung Audio - Initial Release
Log: Initial release with Samsung Audio , which cannot use DEEP_BUFFER_PLAYBACK so sometime you will hear plop sound and absent sound.
27/4/21 with v1a Audio Hal - Initial Release
Log: Initial release with Samsung Audio , which can use DEEP_BUFFER_PLAYBACK so sometime you will hear less plop sound and absent sound. This one gives smooth sound.
TWRP for v1a3gxx is here. Use this one to flash. This update , you can easily check+fix file patition of internal storage with this command on terminal of TWRP "chfixfs".
Please how do we get access?
kaengselllley said:
Please how do we get access?
Click to expand...
Click to collapse
Sory, I forgot to open for public. Now you can access.
khomsn said:
Sory, I forgot to open for public. Now you can access.
Click to expand...
Click to collapse
thanks
I'm getting "Error executing updater binary in zip ....."
khomsn said:
Sory, I forgot to open for public. Now you can access.
Click to expand...
Click to collapse
thanks
I'm getting "Error executing updater binary in zip ....."
Use This TWRP
i flash Viper4Android v.2.7.2.1 using magisk, is not working, and i use transparent clock & weather, it can not detect the current location, please advise.
Thanks.
khomsn said:
Use This TWRP
Click to expand...
Click to collapse
Thank you for the help
RW168 said:
i flash Viper4Android v.2.7.2.1 using magisk, is not working, and i use transparent clock & weather, it can not detect the current location, please advise.
Thanks.
Click to expand...
Click to collapse
Magisk Latest update not compatible with Viper4Android
khomsn said:
Magisk Latest update not compatible with Viper4Android
Click to expand...
Click to collapse
when use this rom [ROM][SM-P900][UNOFFICIAL] Lineage 17.1 | Android 10 Q |, viper4android works fine. its not magisk problem..
Is it possible to remove spen feature from thr rom and prevent reboot??
mvdarwin said:
Is it possible to remove spen feature from thr rom and prevent reboot??
Click to expand...
Click to collapse
mvdarwin said:
Is it possible to remove spen feature from thr rom and prevent reboot??
Click to expand...
Click to collapse
don't use spen for now
Hi Khomsn, thanks for the Rom, i flashed the new rom, but earphone using jack is not working, only working with tablet speaker, please advise, thanks.
RW168 said:
Hi Khomsn, thanks for the Rom, i flashed the new rom, but earphone using jack is not working, only working with tablet speaker, please advise, thanks.
Click to expand...
Click to collapse
Do you have previous backup for data partition, I had this problem before it is some error in data file that prevent audio route to function properly. So restore that partition and reinstall rom. Or rest to factory.
For Netflix , you have to download last version to sdcard an install. Play store not show and not allow to install.
But it works.
Hi Khomsn! First of all, thank you for the ROM and for the source codes. I have successfully build working rom using your sources.
I should notice, that for me S-Pen is working nice. First time - device indeed got frozen, and went to the reboot. But after this - no further S-Pen problems. Unfortunately, this is not working with the camera.
But, unfortunately I did not manage to get AFWall+ working. Even after adding NAT support to the kernel I am receiving errors from iptables.
ivan.odinets said:
Hi Khomsn! First of all, thank you for the ROM and for the source codes. I have successfully build working rom using your sources.
I should notice, that for me S-Pen is working nice. First time - device indeed got frozen, and went to the reboot. But after this - no further S-Pen problems. Unfortunately, this is not working with the camera.
But, unfortunately I did not manage to get AFWall+ working. Even after adding NAT support to the kernel I am receiving errors from iptables.
Click to expand...
Click to collapse
Source code is not up to date yet. Now source code is updated.
Camera error on this
libexynosv4l2: failed to ioctl: VIDIOC_QBUF (22 - Invalid argument)
libexynosv4l2: failed to ioctl: VIDIOC_REQBUFS (-1 - Invalid argument)
buf index always 0 .
Hi Khomsn, thanks for the rom. You make our note 12.2 survive through the years
One question about some notifications didn't get in previous unofficial lineage rom. This build is signed with a public key & SElinux deactivated... should I simply turn off the notification ? or any guidelines how i can resign myself the build and activate SElinux (can i use the source code to do that) ?
thank you again and the other devs for these fantastic roms
TESTIMONIALS
This ROM is September patch. Super light, ready for daily use, it comes with google ecosystem instead of Samsung Bloats
FEATURES
Heavily debloated (Scamsung Knox, Account, Services, Scamsung Cloud, many system apps,
background processes, backdoors, Samsung SMART features, Secure Folder) (around 230 deleted apps)
Pixelyfied (This means all stock apps as Dialer, Messages, Launcher and Recents
-got replaced by Lawnchair,-
and more got replaced by pixel apps)
Overall improvements: MCK KERNEL BY DEFAULT (Enabled HighEnd animations, improved battery by using my debloat and
some optimizations by using some custom props) (Enabled features like AOD clock, music,
performance mode QS tile, faster bootup, disabled crc for smoother and greater sound)
and many more waiting for you to find it.
HOW TO INSTALL IT
Flash the ROM using Salvo's TWRP. Just do the regular format. But if you are coming from RAY OS, please FLASH THE STOCK SUPER before, because the scheme uses by ray os rom doesnt work with my ROM. But if you are coming from stock rom, just flash it and forget. Flash the ROM also and Reboot.
AFTER BOOTING PROCESS
After you`ve booted up into the ROM, install this Magisk app. Open Magisk, and if it`s asking you to reboot, reboot.
Then, open it again and flash this magisk module to fix camera and Safety Net. And then reboot.
You may have to crash the camera app a few times after every reboot, that`s how Scamsung is doing on rooted devices.
In case you set gestures navigation bar, reboot it after.
IF THE DIALER IS CRASHING, JUST SET IT AS THE DEFAULT PHONE APP. From now you can enjoy my hard crafted ROM.
DOWNLOAD LINKS and sources
MEGA link for ROM : mega link
Our Telegram support group: TG Group
Kernel Source Code: MCK repo
Really looking forward to my Samsung phone not having any bloat ware. Tyvm sir.
Scamsuck
reserved
* Updated to September patch - and aloy better than before.
* as of now simcard manager is broken, so dualsim users may have to suffer abit, but it s manageable* (i m working on fixing this) FIXED
Will the TWRP touch problem be fixed?
NickDeveloper said:
Will the TWRP touch problem be fixed?
Click to expand...
Click to collapse
Can't say for sure. It was fixed on m52 from what I understand so a52s should be as well in theory. The same fix didn't work on a52s though, but devs are still trying.
any update for this rom
MsuatafaKhatab said:
any update for this rom
Click to expand...
Click to collapse
Soon sir.
If possible, kindly include the Samsung automatic call recording feature and double-tap to switch-on / switch-off gestures too in your next rom release please.
GreenIce said:
If possible, kindly include the Samsung automatic call recording feature and double-tap to switch-on / switch-off gestures too in your next rom release please.
Click to expand...
Click to collapse
By default, it has these features. Call recording is present when u call. And by double tap you mean double tap to wake and put the phone into idle?
ronardnx said:
By default, it has these features. Call recording is present when u call. And by double tap you mean double tap to wake and put the phone into idle?
Click to expand...
Click to collapse
Thank you. Yes, I use double-tap wake.
It s working for me without issues )
ronardnx said:
It s working for me without issues )
Click to expand...
Click to collapse
Thank you, I am currently trying out another ROM, I'll check this ROM too in the next couple of weeks.
First of all thank you a lot for your amazing work ronardnx !
I followed your Tutorial but there are some points where i got stucked. The TWRP linked in your Tutorial wasnt able to boot. So i managed to get TWRP with this tutorial: https://forum.xda-developers.com/t/recovery-unofficial-twrp-3-6-2-1-for-galaxy-a52s-5g.4488419/
After that i installed your rom with a usb otg and on the console i got the message "The ROM has been successfully installed. BE THE LIGHTNESS!". BUT after that i got the following error lines:
1. Failed to mount "/system_root" (Invalid Argument)
2. Failed to mount "/product" (Invalid Argument)
When i choose "Reboot System" i got the message "No OS installd! Are you sure you wish to reboot?". If i swiped right to reboot, it showed me the Samsung Logo with the red text information that this is not a original samsung firmware blabla...
And suddenly the phone turns off and trys to boot again (bootloop).
Are there any known solutions for that kind of problem?
luffy786 said:
First of all thank you a lot for your amazing work ronardnx !
I followed your Tutorial but there are some points where i got stucked. The TWRP linked in your Tutorial wasnt able to boot. So i managed to get TWRP with this tutorial: https://forum.xda-developers.com/t/recovery-unofficial-twrp-3-6-2-1-for-galaxy-a52s-5g.4488419/
After that i installed your rom with a usb otg and on the console i got the message "The ROM has been successfully installed. BE THE LIGHTNESS!". BUT after that i got the following error lines:
1. Failed to mount "/system_root" (Invalid Argument)
2. Failed to mount "/product" (Invalid Argument)
When i choose "Reboot System" i got the message "No OS installd! Are you sure you wish to reboot?". If i swiped right to reboot, it showed me the Samsung Logo with the red text information that this is not a original samsung firmware blabla...
And suddenly the phone turns off and trys to boot again (bootloop).
Are there any known solutions for that kind of problem?
Click to expand...
Click to collapse
I will update it tomorrow. Now is all stable and better. Just use the twrp gave by salvo, aka @BlackMesa123 . I have reworked the rom from scratch
Sir can u plese help me , how i flash super , now i am on ray os 3, if possible please provide steps.
PranjalGoswami said:
Sir can u plese help me , how i flash super , now i am on ray os 3, if possible please provide steps.
Click to expand...
Click to collapse
Flash stock Rom if you coming from RayOS
PranjalGoswami said:
Sir can u plese help me , how i flash super , now i am on ray os 3, if possible please provide steps.
Click to expand...
Click to collapse
i will no longer do oneui craps
only making gsi atleast usable
Correct
Sir ,
Appreciate your work, os running very smoothly, bug i notice ,if wifi calling is on , incoming and outgoing call is automatically disconnected after picking call. Some magisk module also not working like magnater. Search option also not in settings.