Hi, I need help, I got Lumia 925 and the only activity it shows is the storage when i connect it to the PC, and also i get a beep sound when connected to the charger but thats it. The screen stays blank. Even after using windows device recovery tool and installing firmware nothing happens.
Any suggestions?
Display or motherboard fault.
uiqjirka said:
Display or motherboard fault.
Click to expand...
Click to collapse
I see, thanks.
I got another 925 that died while attempting to unlock the bootlocker with WPinternals , its not even detecting the USB anymore. I wonder if there is anything I can do with that one. I would do anything at this point
Related
I could not connect my Lumia 950 to a Windows 10 PC using the data cable the phone came with.
When I connect them the phone asks if I want to enable "data connection" I push yes. The PC is installing some 950 firmware or driver but nothing happens. I cannot reach the phone. Any idea?
try install Windows Device Recovery Tool (because drivers)
http://go.microsoft.com/fwlink/?LinkID=525569
P.S.
in case that not helped, also try install Nokia Software Recovery Tool (this tool not working with Lumia phones but install and fix current drivers)
http://go.microsoft.com/fwlink/?LinkID=525568
you dont need to enable any data connection, just plug USB cable and look in "My Computer"
if Windows Phone not show in "My Computer" go to Control Panel - Devices and Printers, look for Windows Phone there
dxdy said:
you dont need to enable any data connection, just plug USB cable and look in "My Computer"
if Windows Phone not show in "My Computer" go to Control Panel - Devices and Printers, look for Windows Phone there
Click to expand...
Click to collapse
This is what I see in Control Panel (see picture attached). What do you suggest now?
right click and Troubleshot
dxdy said:
right click and Troubleshot
Click to expand...
Click to collapse
Doesn't work. It cannot find driver for it. I tried it more times using different USB ports. This is ridiculous. A Microsoft product cannot find driver for another Microsoft product.
driver work just fine... seems your Windows update not working (or you block something). i dont have any problem with Lumia 950 on Windows 10 Pro
did you try install Windows Device Recovery Tool and Nokia Software Recovery Tool? (you have drivers in this tools)
dxdy said:
did you try install Windows Device Recovery Tool and Nokia Software Recovery Tool?
Click to expand...
Click to collapse
Yes, both are installed.
dxdy said:
(you have drivers in this tools)
Click to expand...
Click to collapse
Not sure, how can I check?
I solved it. If anybody runs into similar issues the problem was the Windows itself. I had Win 10 Pro N version freshly installed. Win 10 Pro N doesnt contain Media Player which is needed to connect a mobile phone even an Android. Which is strange. I realized when I couldnt connect an old Android either.
I tried to install media feature set but it didnt help. I had to reinstall Win 10 Pro version. Everything works now.
so you moved the piano because you couldn't move the chair?
Mine was connecting a week ago, but now the Lumia 950 is recognized by Windows Device Recovery Tool , but doesn't appear in the file browser no more.
cubitusclaudius said:
so you moved the piano because you couldn't move the chair?
Click to expand...
Click to collapse
I think he actually just added the chair. ^^
Or maybe, moved to a flat provided with a chair.
try this
CMage said:
I could not connect my Lumia 950 to a Windows 10 PC using the data cable the phone came with.
When I connect them the phone asks if I want to enable "data connection" I push yes. The PC is installing some 950 firmware or driver but nothing happens. I cannot reach the phone. Any idea?
Click to expand...
Click to collapse
I had the same issue and found this thread while looking, my issue is that the usb3 port of my pc would only charge the phone, no other options available however when I moved the usb cable to a usb 2 port everything worked as it should, phone companion, import photos etc, strange considering the cable supplied with phone is fast charge usb c type yet in doesn't work in the fastest port on my pc.
hope this helps someone out
I had a similar issue after Win 10 anniversary update. Plugging phone into USB 3 hub would not recognize the phone (even though it worked before the update). I tried plugging it directly into a USB port on the MB and it recognized the phone, installed the drivers, and connected. AFTER this, I was able to connect via the USB 3 hub, as I had before the update. Hope this helps somebody.
Interesting...
I had some similar problem with the Continuum docking station, where the provided (with the dock) cable wouldn't allow the phone to see it at first.
It then worked after I swapped both ends... Go figure.
Hello guys,
It seems I have the same issue here, but my phone won't turn at all its just vibrate when plug in the cable.
I want to connect it to the PC to use windows device recovery tool.
I think its a known problem (Lumias) so any help will be appreciated !
Windows Device Recovery Tool was not able to install on my Lumia 810 ones I plugged to USB 3 it worked!
OS Win 10 Pro
TulakChoco said:
Windows Device Recovery Tool was not able to install on my Lumia 810 ones I plugged to USB 3 it worked!
OS Win 10 Pro
Click to expand...
Click to collapse
is ur lumia completely dead ? I mean black screen nothing showing up.!
STALKER18 said:
is ur lumia completely dead ? I mean black screen nothing showing up.!
Click to expand...
Click to collapse
No, is working well.
So lately I've been having more and more issues with my Lumia 640, such as random reboots, data switching, and slow downs. I decided that since I haven't preformed a hard reset since about 2 builds ago, it was time for it. I went ahead and reset, and everything appeared to be working better. It was when I plugged my phone into the laptop to dev unlock and deploy tools that I ran into trouble. As soon as I plug it in, I get the device connected sound followed by USB Device Not Recognized error, a Phone charging slowly message on the phone, and then a device unplugged sound from the laptop. I tried it on my desktop and get the exact same results. Both my computers are running Windows 10, and my 640 is on latest 10586 build.
I've tried everything I could think of/find online including
-Soft reset the device while plugged
-Using different Usb cable
-Uninstalling the device (read below)
-Rebooting the PC and letting it turn the phone on with it
-Uninstall all Usb Root Hubs
Unplug PC power cord/battery and Usb devices and wait 10-15min
-Developer Mode on/off
-Hard Reset phone again
I really don't know what else to do. When I plug it in and get the not recognized error, it's a Descriptor Request Failed, and then the device disconnects. In Device Manager it shows under Universal Serial Bus (as an Unknown device with the Descriptor Request Failed next to it) until it disconnects itself, then it disappears. Using Show Hidden Devices and a command to enable showing every device ever connected (plugged in or not), I see it show but it's greyed out and it's properties page says it's disconnected. While showing all hidden devices, I uninstalled the phone under Portable Devices as it used to work, along with my wife's phone.
Nothing I've done has gotten me anywhere. It just connects with the error and immediately disconnects. It used to work with both the laptop and desktop before I hard reset. The only thing i believe could be causing it was the fact that before the reset my phone was being faked as a Lumia 1520. But I've uninstalled that in the hidden devices of Device Manger.
Any help would be greatly appreciated. As it stands, I can't developer unlock, deploy tools, or even copy my pictures!
Edit- just tried plugging it into 2 other computers with WinXP (. I know it's not supported), and also get the device not recognized and charging slowly. So... Either the firmware/os git messed up, or the Usb jack is messed up.
I have also have same problem. If you find the solution. Pls let me know. problem is you cannot roll back to 8.1 without connection to PC
---------- Post added at 02:54 PM ---------- Previous post was at 01:56 PM ----------
probably this can help
http://mobifaq.com/why-can-t-i-connect-my-lumia-640xl-to-my-laptop/t9893/
Does device charge properly using AC? Based your trouble shooting so far it seems like it be the Usb port acting up.. I am assuming the Usb cables were 6ft and under? Did you flash any non stock rom to the phone? And what do you mean faked as a 1520? If the phone acts weird while charging it definitely could be the phones Usb port. If not you can put the phone in flash mode and use thor2 list device connection list to see if and how long the phone is being detected by windows.
OP, you have interopunlocked phone with FS acces?
augustinionut said:
OP, you have interopunlocked phone with FS acces?
Click to expand...
Click to collapse
as a matter of fact yes, to both!
anubis23 said:
Does device charge properly using AC? Based your trouble shooting so far it seems like it be the Usb port acting up.. I am assuming the Usb cables were 6ft and under? Did you flash any non stock rom to the phone? And what do you mean faked as a 1520? If the phone acts weird while charging it definitely could be the phones Usb port. If not you can put the phone in flash mode and use thor2 list device connection list to see if and how long the phone is being detected by windows.
Click to expand...
Click to collapse
charging is perfectly fine. I also suspected the Usb port, but after an online chat with Cricket Support, they assured me it was a software issue.
animesh_shah said:
I have also have same problem. If you find the solution. Pls let me know. problem is you cannot roll back to 8.1 without connection to PC
---------- Post added at 02:54 PM ---------- Previous post was at 01:56 PM ----------
probably this can help
http://mobifaq.com/why-can-t-i-connect-my-lumia-640xl-to-my-laptop/t9893/
Click to expand...
Click to collapse
the thing is, I couldn't even restore to 8.1 with my issue. The phone would not stay connected long enough to be identified by the OS let alone the Recovery Tool.
However, I have good news. I did finally solve the problem. When I had realized that connecting the phone while in the boot loader got it to detect and install as Lumia BootMgr, I opened up the Recovery Tool and sure enough it was detected. I let it start downloading the ROM, and about 1/2 way through I heard the device disconnected sound and thought oh great this isn't going to work either. However, the download kept going, and when it finished I clicked the start install button, but it gave an error saying the device was not detected. So with the phone still plugged in, I preformed a soft reset and continued holding Volume down to boot back into the boot loader. When I came to the ! screen and the phone was detected again as Lumia BootMgr, I clicked Retry in the Recovery Tool and it actually copied over the ROM, which thankfully is a very quick process.
Once 8.1 had finished setting up the phone was detected and installed perfectly on the computer. Last night I updated back to W10 and it's still detecting without an issue. I'm for sure not enabling the Full Filesystem Access hack again. Before this problem started I was already tired of waiting up to 30 minutes at a time for it to connect. Only reason I did it was to copy the custom HOSTS mod file to block ads, which I'd love to do again, but it's just not worth it.
So, if FS acces, enter device manager on pc, disable windows phone, enable windows phone.... wait a minute...voila
augustinionut said:
So, if FS acces, enter device manager on pc, disable windows phone, enable windows phone.... wait a minute...voila
Click to expand...
Click to collapse
Are you referring to the problem I was having? If you are, then reread my OP. You'll see that Device Manager would not even display the phone because the phone would immediately disconnect after the USB Device Not Recognized error popped up. There was simply nothing to disable, or enable for that matter.
If your saying to disable and enable AFTER applying the FS access hack to affect the detection time, then please, elaborate on that.
Erase driver, reinstall driver, try with another pc, sell the phone....
@x_orange90_x
http://forum.xda-developers.com/win...de-filesystem-access-sftp-windows-10-t3185766
augustinionut said:
Erase driver, reinstall driver, try with another pc, sell the phone....
Click to expand...
Click to collapse
you obviously did not reread the OP.. I tried all of those with the exception of the last with no sucess.
And I think you've missed my point entirely.. I solved the issue already. Hopefully the other member that posted in here with the same problem can fix it by following what I did.
You right.. disable full fs access....
You still active Mr. Orange
Hello...
i've got a bricked phone from a friend of mine because he's out of options to put it back to fully function.
he told me that he had flashed the phone while it was in 9008 usbbulk whith a recovery thats not suitable for this
phone. now the only thing the phone is doing is turn backlight on when connect to pc ... it will not be recognized. all drivers are installed .... windows runs on test mode with no verfication for drivers or else ... is it possible to rescue the phone or is it good white brick ?
Phone Data:
LG K10 (420N)
16 GB
TheRazcall said:
Hello...
i've got a bricked phone from a friend of mine because he's out of options to put it back to fully function.
he told me that he had flashed the phone while it was in 9008 usbbulk whith a recovery thats not suitable for this
phone. now the only thing the phone is doing is turn backlight on when connect to pc ... it will not be recognized. all drivers are installed .... windows runs on test mode with no verfication for drivers or else ... is it possible to rescue the phone or is it good white brick ?
Phone Data:
LG K10 (420N)
16 GB
Click to expand...
Click to collapse
Do you see anything in device manager?
No... device manager shows nothing and there is no satisfaing "da ding" noise after plug in the USB to my PC...
my lumia 1320 phone is died afer I tried to unlock bootloader with wp internal
its now There is no response to any screen response does not light up and there is no vibration and does not see the computer when its connecting with USB no any thing
plz help me
Sorry for late reply:
if it is still in that state, unscrew back cover (T4 Torque) and pull off battery. Wait some minutes. Click on battery. You should hopefully find your phone after reconnection as Qualcom Bulk device or even better in a defined state for recovery. By the way, which SBL3 file did you use for unlocking?
Best regards
Joachim
What is the model?
RM 994 or 996?
JoachimP said:
Sorry for late reply:
if it is still in that state, unscrew back cover (T4 Torque) and pull off battery. Wait some minutes. Click on battery. You should hopefully find your phone after reconnection as Qualcom Bulk device or even better in a defined state for recovery. By the way, which SBL3 file did you use for unlocking?
Best regards
Joachim
Click to expand...
Click to collapse
1020 SBL3 file
Can you explain to me more than that? I do not have any hardware to do the software (the box)
Jayed Ahsan said:
RM 994 or 996?
Click to expand...
Click to collapse
994
Did you remove and reconnect the battery? After that connect to your computer and check the device manager. Report if you see a device. Check also if your USB connector is physically clean (dust...).
Best regards, Joachim
JoachimP said:
Did you remove and reconnect the battery? After that connect to your computer and check the device manager. Report if you see a device. Check also if your USB connector is physically clean (dust...).
Best regards, Joachim
Click to expand...
Click to collapse
I've done what I've been told and when I connect the phone to the computer this message appears (your device is not regonized) and I have a message in device manager (usb input device)
Have you installed the Windows Device Recovery Tool (for the drivers). Have you already tried a different USB cable, USB port, also a different computer with correct driver set?
Yes
Yes..Yes. yes
Did you already uninstall this USB input device (with drivers) and reboot the computer? We should come to a point where we have a Qualcomm device or a Nokia Emergency device or even a Lumia1320.
my nokia 620 got damaged while working with the wpinternals program. Now it won't start. In the device manager it appears as qualcom 9008 and then freezes the computer. Do you know what happened to this phone and how to fix it? thor2 shows connection problem.
Im think Nokia lumia 620 wasnt in emergency mode.
How to enable this mode? is there any way
when trying to upload via thor2, the message CONNECTION NOT FOUND appears
ATF
I was able to upload a big-boot using atf. Is it possible to upload individual partitions separately: MainOS, Data etc. I have a copy with data and I would like to restore it.
the lumia 620 is now red screen.
user restore bootloader feature of wpinternal