Related
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
i need your help too sir
cm-12.1-20160713-Bet…weakV3.zip501.1 MB , so the system just 500 mb?
now im still using eui with malware , so i just follow the installation step?
Tested V3 installation sequence
I went to TWRP 3.0.2 for a factory reset wipe
Installed ROM "cm-12.1-20160713-BetaHydri-CollapseTweakV3.zip"
Installed OpenGApps arm64 5.1 Nano
Installed all three ZIPs from DolbyAtmos Fix
Wiped Caches via TWRP
Rebooted
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Presidente_84 said:
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
Click to expand...
Click to collapse
everyone works mate just go ahead and install v4 cm
I'm on V3 and all seems ok, what's the differences between V3 & V4?
martinbanshee said:
I'm on V3 and all seems ok, what's the differences between V3 & V4?
Click to expand...
Click to collapse
"Only some build.prop changes as some folks reported problems. [...]
one of the main changes was this:
ro.telephony.default_network=22,22 and ro.ril.hsxpa=1
it was before
ro.telephony.default_network=10,10 and ro.ril.hsxpa=2"
So LTE and UMTS changes basically
Thanks, I'll try V4 for a few days and see how it goes.
Sent from Tapatalk
thank you all guys.
Now i am with the stock original ROM EUI without malware, without any problem.
Can anyone post some pictures or screenshots from CM 12.1 ROM v4?
to see the appearance of the system
Stiffrigg said:
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Click to expand...
Click to collapse
How about MHL TV-OUT & IR blaster?
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
dragangiga said:
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
Click to expand...
Click to collapse
BetaHydri said:
Hi,
you don't need to uninstall FlashRing.
With the Flash RIng App you can configure which APP and when the Flash should be used for notification.
View attachment 3819790
View attachment 3819791
View attachment 3819792
View attachment 3819793
View attachment 3819794
Click to expand...
Click to collapse
Sent from my LeTv 1 Pro using Tapatalk
letv le 1 pro
willngg said:
Sent from my LeTv 1 Pro using Tapatalk
Click to expand...
Click to collapse
i fix it
thanks a lot
System freezes when data connection switches to Edge
Hi All,
Using this ROM from BetaHydri, overall it works really good, however I have a problem that is getting annoying: whenever the phone switches to Edge from LTE/HSPA, the system freezes. As this can happen even in a staircase in an office building or on a train ride on the countryside it is rather vexing.
I have deleted the caches, but the issue persists.
Has anyone encountered the same problem maybe? Any ideas how to solve this?
Evaluation and some solutions
After some evaluation I can say this rom is really good.
There were some issues however:
I had sensors malfunctioning (gyro inverted). There is some discussion on this subject in Betahydri's developer thread, but I cannot post there as I'm considered a newbie by xda
Somehow the sensor calibration file (/persist/sensors/sns.reg) can get messed up. The trick is to delete the file, and on the next boot the system should replace it with the defaults, which are in /system/etc/sensors/sensor_def_qcomdev.conf. But this is not (always?) happening on this CM rom. What I did to resolve was to delete /persist/sensors/sns.reg, make a full TWRP backup, factory wipe, flash cuoco's 11s rom, start it, confirm if the gyro is working again, then restore the TWRP backup. Maybe there's a simpler way, but this worked.
I had a non-working notification LED. Wiping data in TWRP solved this, but I just had to find out what it was It turns out wiping the data of Settings Storage (com.android.providers.settings) was enough to restore the notification LED. The culprit is that there is a value in the settings.db of this component, in the system table called notification_light_pulse which was set to 0 somehow. Setting it to 1 with SQLite Editor (speed software) also solved the problem. There are more interesting values in this table by the way.
IR is not working, this is a known issue and I have no solution.
Double tap to wake does not work, at first I thought this would be a showstopper for me, but then I found out that with the Gravity Screen app, I can wake and sleep by using proximity and G sensors, which more than satisfies my needs for easy wake up and sleep.
OTG is not working natively, this can be overcome by third party apps like USB OTG helper. Could have something to do with fuse kernel modules not being available.
Volume level of ringer/notification is not calibrated, first step is already very loud and it doesn't change much if set higher. Does somebody now a solution for this?
I have dual SIMs and I could not switch one SIM to anything else than GSM only. Trick is to disable the other SIM, then set the network mode you want, and then re-enable the other SIM. There can be only one SIM for data, but somehow it wouldn't switch if the other SIM (that currently has the data) is still active.
If I find more, I'll post here.
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
chr0m said:
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
Click to expand...
Click to collapse
You can try to see what is happening with OS Monitor (from play store) In settings, enable expert mode to see the native Linux processes, try to find the one that is eating the cpu. I had this once, it was some media indexer process that would not stop (can't remember the exact name).
xposed
Hi all,
Since i cannot post in ROM's thread, i will ask here for your help. I am having a hard time installing Xposed on BetaHydri-CollapseTweakV4.
I get an error while fashing Xposed Framework xposed-v86-sdk22-arm64:
<<Xposed version: 86
! Wrong platform: arm
! This file is for: arm64>>
So i successfully flashed the arm framework (for 32 bit), for afterwards to install XposedInstaller_3.0_alpha4. But now i am getting "Xposed Framework installed, but now active."
Any idea? Thanks.
Am I am on TRWP 3.0.2.0 by CUOCO92, coming from Le1PRO_US_X800-ROW-PB-v60-CUOCO92-5.5.014S.
Hi all
I've got the US version and I'm with 12.1 v4.
I got only edge on data sim (the other is one only for calls)
Any ideas as I can't select any options but GSM from the hidden menu in *#*#4636#*#*?
Is it OK if I flash 14s Cuoco now as I'm in 12.1?
---------- Post added at 02:42 PM ---------- Previous post was at 02:28 PM ----------
I just followed #slidetowipe and now I got LTE
T H A N K Y O U M A N ! ! !
It's interesting how the same phone works differently for different people... what I mean is that the GPS on my phone is very bad - it was bad from the very beginning with factory ROM, with MrRusch ROM, different versions, gps.conf tweaks, etc.... Now I am using an external bluetooth GPS receiver as the fix was painfully slow or non-existent. Some people report no such problems, how can that be, I wonder?
Now I use CM 12.1 V4 ROM from BetaHydri, But I found some bugs :
1. Error clock / alarm... If I choose setting or an alarm clock, appeared notification "unfortunately, clock has stopped"
2. IR isn't working
3. And I have a problem with the network 4G LTE, where the issue there is no on EUI ROM
Please help me to fix it.
To be honest I prefer premises EUI ROM if there is not malware and adware, Is there EUI ROM clean of Malware and adware?
If there are please help me to link from the ROM and the way instal rom, because I was new in using x800.
And I had experienced hard brick at instal couco92 14S.
Thanks
hello i'm mi 5s 4gb/128gb user
yesterday, i was using cyanogenmod 13 but i want to use miui again
so i restored nendroid backup from twrp recovery
that was start of diaster..
after this. fingerprint scanner mostly doesn't work
sometimes fingerprint scanner work correctly after reboot, it doesn't work.. and sometimes... it works...
i did many many method (global rom, china rom via edl mode, fastboot mode) but everything has same result,
so i looked at my logcat
it says
QFP : QfpThreadMatch::execute: match result -3: QFP_INSUFFICIENT_COVERAGE
with my finger or not logcat said same result
why my fingerprint scanner doesn't work?
is it hardware issue?
sorry for poor english
yesterday, i was using cyanogenmod 13.......is it hardware issue? .......
jlmcr87 said:
yesterday, i was using cyanogenmod 13.......is it hardware issue? .......
Click to expand...
Click to collapse
???
Maybe placebo effect but people are saying Global rom had improved fingertip detection rate.
If i were you, i would flash as stock as possible, recovery, bootloader, lock status, everything, just to determine software versus hardware failure.
Hope for the best, as this kind of life cycle premature failure freak me out, first stucked autofocus sensor now this!!!
jpg3927 said:
???
Click to expand...
Click to collapse
You change the software and then ask if it´s hardware?
jlmcr87 said:
You change the software and then ask if it´s hardware?
Click to expand...
Click to collapse
yes it's strange
jpg3927 said:
yes it's strange
Click to expand...
Click to collapse
I had a problem which seemed to be hardware related after flashing the Chinese developer ROM and then later restoring a Miui EU ROM from a backup. My problem was with audio - there was no sound coming from the speaker or headphone output. I did diagnostic tests which failed - indicating a hardware problem.
It was only after re flashing the EU Miui ROM that the problem was resolved.
EpicSauce said:
I had a problem which seemed to be hardware related after flashing the Chinese developer ROM and then later restoring a Miui EU ROM from a backup. My problem was with audio - there was no sound coming from the speaker or headphone output. I did diagnostic tests which failed - indicating a hardware problem.
It was only after re flashing the EU Miui ROM that the problem was resolved.
Click to expand...
Click to collapse
i solved it
i think this was problem of driver
so i needed rollback of driver
first. i flashed 6.10.13 eu rom over 6.12.29
it occurs bootloop
second. i flashed 6.12.29 over 6.10.13 again. and fingerprint works like charm again!
Exists the cyanogenmod for Mi5s?
Still very buggy. We have to wait for xiaomi to release the source code to get nice CM .
The fingerprint happened to me too, it just stopped working.
Flash the stable global using fastboot, it will erase everything, and will be great again.
Don't restore with Titanium backup, I had all kind of weird problems everytime I tried.
One of the worst fp sensors ever. I tried all the tricks mentioned in several places, detection rate stays very low.
Sent from my MI 5s using Tapatalk
LucaOwner said:
Exists the cyanogenmod for Mi5s?
Click to expand...
Click to collapse
Linage os
Hey,
I have the following problem, i can't make phone calls with ROMs on LOS base. In miui and ROMs on AOSP base i can make calls without problems. The funny thing is when I have a second SIM card in it and setup one for mobile data and the other for calls it works in LOS ROMs. Has anybody a idea what I could do? Sorry for my bad English...
jigs4wkiller said:
Hey,
I have the following problem, i can't make phone calls with ROMs on LOS base. In miui and ROMs on AOSP base i can make calls without problems. The funny thing is when I have a second SIM card in it and setup one for mobile data and the other for calls it works in LOS ROMs. Has anybody a idea what I could do? Sorry for my bad English...
Click to expand...
Click to collapse
I had the same problem (kind of). In fact it would make a call but it didn't show it was connecting on my screen and no way to disconnect. I never got to the root of the problem but re-flashing the ROM fixed it for me.
Derodraaa said:
I had the same problem (kind of). In fact it would make a call but it didn't show it was connecting on my screen and no way to disconnect. I never got to the root of the problem but re-flashing the ROM fixed it for me.
Click to expand...
Click to collapse
My problem is not the ui it's that i can't make any call because after I tap on call, nothing happens until I lost the connection. I tryed many ROMs (with gapps and without gapps) and only in aosp ROMs i don't have this problem. Also when someone is trying to call me he automatically comes to my Mailbox.
Here are some logs and a Screenshot.
The message on the screenshot is German and means no Mobile network available.
I am despairing it can not be true that I am the only one with this error and that it is Irreparable. Why can I make calls without any problems in DU and HalogenOS but in every rom that is based on LOS I get the same error?
jigs4wkiller said:
I am despairing it can not be true that I am the only one with this error and that it is Irreparable. Why can I make calls without any problems in DU and HalogenOS but in every rom that is based on LOS I get the same error?
Click to expand...
Click to collapse
Maybe your phone is fake Xiaomi, where did you get it ?
Or refurbished with SIM Card Reader changed
WiMiOP said:
Maybe your phone is fake Xiaomi, where did you get it ?
Or refurbished with SIM Card Reader changed
Click to expand...
Click to collapse
I get it from here:
https://tradingshenzhen.com/18-xiaomi
Why should it work flawless with DU and HalogenOS and MIUI if it were fake??
Try to disable VoLTE
Zubodub said:
Try to disable VoLTE
Click to expand...
Click to collapse
If I disable Volte I lose immediately the connection after Tap on call
Hı everbody. I have problem about no sound when Im calling. I have tried many stock and custom ROMS and differnet baseband with that ROMs. Everything was ok until I upgrade
8 oreo rom. after I upgrade 8 custom ROM (I couldnt remember which one cause I tried more than twenty roms :cyclops::cyclops::cyclops: ). I couldnt solve the problem.
Does anybody tell me What should I do.
sadstatus said:
Hı everbody. I have problem about no sound when Im calling. I have tried many stock and custom ROMS and differnet baseband with that ROMs. Everything was ok until I upgrade
8 oreo rom. after I upgrade 8 custom ROM (I couldnt remember which one cause I tried more than twenty roms :cyclops::cyclops::cyclops: ). I couldnt solve the problem.
Does anybody tell me What should I do.
Click to expand...
Click to collapse
I know
https://mega.nz/#!TEhGlQpI!AEsN0V1zUwmD0lZGgVjmiELRNvjWlCe2RGpw-RnFw0g
Flash this and enable volte and make a call then flash custom rom.
selvarajrajkanna said:
I know
https://mega.nz/#!TEhGlQpI!AEsN0V1zUwmD0lZGgVjmiELRNvjWlCe2RGpw-RnFw0g
Flash this and enable volte and make a call then flash custom rom.
Click to expand...
Click to collapse
ıt doesnt work for me :crying::crying: thanks alot can you write basebabd and kernel number which it must be
selvarajrajkanna said:
I know
https://mega.nz/#!TEhGlQpI!AEsN0V1zUwmD0lZGgVjmiELRNvjWlCe2RGpw-RnFw0g
Flash this and enable volte and make a call then flash custom rom.
Click to expand...
Click to collapse
ıt doesnt work for me :crying::crying: thanks alot
lesser audio work but small head st icon really bother me
sadstatus said:
ıt doesnt work for me :crying::crying: thanks alot
lesser audio work but small head st icon really bother me
Click to expand...
Click to collapse
Baseband and kernel doesn't matter.
Did you enable HD calling from the settings
yeap. its already opened by defoult.I closed and reopen
audio broken
sadstatus said:
yeap. its already opened by defoult.I closed and reopen
Click to expand...
Click to collapse
im also facing the same issue for me audio totally broken no audio from speakers,no notification sounds nothing...tried many stock & custom roms can you update the post if your issue is fixed please
No i have already same problem. İ have small bug to work phone download lesser audio from google apps open it press speakers and press settings click " do not mute speakers" and try calling.
Dont worry headset icon still on main screen
I changed audiojack assy but ıts not solved.Problem absolutely software issue. Dont need replace hardware
At last nırvana... I solved thanks to https://forum.xda-developers.com/member.php?u=7262081
its simply
Flash zui 1.9 (with qfil)then zui 3.5 (with qfil) then 4.0(4.0 automatically updated via phone) then unlock bootloader flash twrp flash rom below
https://forum.xda-developers.com/lenovo-zuk-z2/development/jaguar-oreo-8-1-official-t3734597
your ımeı will delete be sure how to replace it before flashing
you can use "tool all in one" for many things
ıf you have a questions dont bother.
Hello,
Someone on Reddit suggested I should ask my question on here, so here I am.
Yesterday I received my Redmi K30 from China. It was tricky to buy this one, because I live in the Netherlands, but I took a chance and bought it.
Everything works properly BUT the camera. The front facing camera's work, but the rear 64M doesn't. I keep getting an error, which says it can't connect with my camera. Or it simply freezes and there's no option to flip from front to rear camera. Other things that I tried are: clear camera cache, reboot, change app permissions.
Someone suggested it could be the Global Rom which was flashed (this is a Chinese Version with Global Rom). It seems that Global Roms can intervene with the original camera.
Is this something I (I'm not technical at all) can change and will this work? I'm afraid if I will change to much in the settings, that I can't return it when it's still not working.
Or should I just return this phone and wait for the Global Version?
Thanks for your help!
Poela said:
Hello,
Someone on Reddit suggested I should ask my question on here, so here I am.
Yesterday I received my Redmi K30 from China. It was tricky to buy this one, because I live in the Netherlands, but I took a chance and bought it.
Everything works properly BUT the camera. The front facing camera's work, but the rear 64M doesn't. I keep getting an error, which says it can't connect with my camera. Or it simply freezes and there's no option to flip from front to rear camera. Other things that I tried are: clear camera cache, reboot, change app permissions.
Someone suggested it could be the Global Rom which was flashed (this is a Chinese Version with Global Rom). It seems that Global Roms can intervene with the original camera.
Is this something I (I'm not technical at all) can change and will this work? I'm afraid if I will change to much in the settings, that I can't return it when it's still not working.
Or should I just return this phone and wait for the Global Version?
Thanks for your help!
Click to expand...
Click to collapse
Hello , sorry , i have a questions for you, do you have enabled Band 20 LTE ( 800 mhz ) Thank you !
Never heard of this failure. I also got mine from China and there is no Global Rom availible. There is the Xiaomi.eu Rom, this not officail. If your Phone is unlocked, you can look on the Xiaomi.eu Thread and try to install it. On the lateste MIUI12 everything works like a charm
i also have this problem.. I just recieved my phone today... cant use 64mp cam and bokeh
I am also seeing this issue. I received my K30 5G on the 23rd and only parts of the camera is work. Issues I'm seeing:
If I try to take a picture while on photo mode, the camera app crashes regardless of if I am using the front or back camera.
If I try to select `64M` mode I get the "Cannot connect to camera" error
If I try to select `Slow Motion` mode I get the "Cannot connect to camera" error
If I try to select `Pro` mode I get the "Cannot connect to camera" error
If I try to use the 0.6 zoom function on the photo mode the camera app freezes
This seems to be the only issue I am seeing with this phone. It's a shame because its a great phone.
Phone Details:
MIUI Version: MIUI Global 11.1.0 | Stable 11.1.0.16 (QGIINXM)
Android Version: 10 QKQ1.191222.002
Does anyone have a device where the camera works normally? Holding off on buying one since reading this thread
I'm having the same issue with the camera of my Redmi K30. Do you know if the new Rom on xiomi.eu solves the problem? Thks for your help
This problem is a bug of the fake Global ROM for this phone, with original chinese/english ROM or Xiaomi.eu there is no issues.
Have the same problem for now I've just installed Google camera that works ok . But non wide and 64 main camera only 5 mega px macro camera is working
When I install a camera info app is only showing me 2 cameras 5 mega pixel each
Zyklo! said:
This problem is a bug of the fake Global ROM for this phone, with original chinese ROM or Xiaomi.eu there is no issues.
Click to expand...
Click to collapse
Did you have the same problem??
RedJHoN said:
Did you have the same problem??
Click to expand...
Click to collapse
My k30 5G is on the way, dont have it yet. But all people report the same problem, that is fixed when change the ROM.
Google's camera improves but doesn't solve the issue. Has someone already changed the rom and fixed the problem ?
LMaria said:
Google's camera improves but doesn't solve the issue. Has someone already changed the rom and fixed the problem ?
Click to expand...
Click to collapse
That I want to know also .
Yes doesn't help the phone those not recognize the wide and the 64 mega pixel camera I've installed camera info app on all of them only showing 2 camera on front on back 5 mega pixel
LMaria said:
Google's camera improves but doesn't solve the issue. Has someone already changed the rom and fixed the problem ?
Click to expand...
Click to collapse
If you have the global ROM your phone is already unlock .
When you power those it's say wonlock?
If yes you can skip unlock bootloader.
And just instal twrp and flash Xiaomi EU Rom
If not booting after just use this : fastboot -w
Power off and is on after you can update from you phone
Thanks for you help. I will try ...
LMaria said:
Thanks for you help. I will try ...
Click to expand...
Click to collapse
Hi! Where is the ROM that is suggested in this case? I am from Italy and bought this phone on aliexpress, experiencing the same issue. It is my first xiaomi phone so I'm not sure where to get the specific rom needed in this case.
Thanks to anyone who will help!
Install Adb Xiaomi https://www.xiaomidriversdownload.c...vcnkvbGF0ZXN0X3VzYl9kcml2ZXJfd2luZG93cy56aXA=
Unlock first bootloader if necessary
( If your phone already say's unlocked when you boot up just skip
https://en.miui.com/unlock/
Install TWRP via Fastboot mode
Code:
fastboot flash recovery twrp.img
fastboot reboot recovery
FORMAT /data partition (NEVER wipe System or Persist!)
Copy ROM to the internal storage
Otg is working whit twrp
Install ROM via twrp
https://sourceforge.net/projects/xi...MK305G_V11.1.20.0.QGICNXM_v11-10.zip/download
If you are in boot loop to twrp
Just use fasboot -w
Power off and on
After that you can update without losing data from updater in your phone.
Maybe you will need to update 2 or 3 time before having the latest software .
That will be done automatically so just sit and relax.
.the update will be done in twrp so just accept and wait
Power of power on
Done
Thank you!!
Hi,
Few of you mentioned Global or English ROM, is that directly from Mi officially? Is so, could anyone please share a link.
The only thing I found is xiaomi.eu which is not the official.
Mine is K30i 5G which is a 48M camera that Camera does not work with xiaomi.eu unfortunately.
Many thanks
GooseDeer said:
I am also seeing this issue. I received my K30 5G on the 23rd and only parts of the camera is work. Issues I'm seeing:
If I try to take a picture while on photo mode, the camera app crashes regardless of if I am using the front or back camera.
If I try to select `64M` mode I get the "Cannot connect to camera" error
If I try to select `Slow Motion` mode I get the "Cannot connect to camera" error
If I try to select `Pro` mode I get the "Cannot connect to camera" error
If I try to use the 0.6 zoom function on the photo mode the camera app freezes
This seems to be the only issue I am seeing with this phone. It's a shame because its a great phone.
Phone Details:
MIUI Version: MIUI Global 11.1.0 | Stable 11.1.0.16 (QGIINXM)
Android Version: 10 QKQ1.191222.002
Click to expand...
Click to collapse
I have the same problem with camera app in my redmi K30 5G installing rom MIUI EU 12.5.7.0