Develop Bugs

[UNBRICK] white screen & waiting for device

HI all,
I've asked this question on the firmware thread, but I do not have an answer. So I'm trying here.
I installed the new firmware without any problems. But after the reboot I'm stuck on the white screen with the green logo, and I do not have connection with the computer via fastboot (waiting for device). As against the phone is communicating with the computer by HTC Sync or Windows Explorer.
What can I do?
Thanks

ggreg said:
HI all,
I've asked this question on the firmware thread, but I do not have an answer. So I'm trying here.
I installed the new firmware without any problems. But after the reboot I'm stuck on the white screen with the green logo, and I do not have connection with the computer via fastboot (waiting for device). As against the phone is communicating with the computer by HTC Sync or Windows Explorer.
What can I do?
Thanks
Click to expand...
Click to collapse
How did you install the firmware?
Have you tried fastboot from the bootloader?

thanks clsA
For mike's method (re-lock the bootloader and fastboot) :
1.If you are S-ON ---> Re-lock your bootloader (this will most probably wipe content of your device)
2.If you are S-OFF ---> no need to re-lock the bootloader.
3.Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
4.Re-name .zip file to firmware.zip
5.Open command prompt
6.Boot your device in fastboot mode (vol down + power ===> fastboot)
7.Connect device to the PC
8.In command prompt cd to fastboot.exe location
9.Make sure you have correct modeid and cidnum (type: fastboot getvar all)
10.Type: fastboot oem lock (if your device is not relocked yet or in case it's S-ON)
11.Type: fastboot oem rebootRUU and wait for device to reboot
12.Type: fastboot flash zip firmware.zip and wait for process to complete
13.Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
14.Type: fastboot flash zip firmware.zip and wait for process to complete
15.Type: fastboot reboot
Currently I have no access to the bootloader

Although the phone is stuck on the white screen it rings when they call me

Turn off the phone holding power button for almost 15seconds till completely shut down. Then hold volume down and power button. You'll be able to enter boot loader. Also provide more details...version firmware, rom, etc

Are you flash a fw twice ?
Try to unlock bootloader and recovery again brother

lennita said:
Turn off the phone holding power button for almost 15seconds till completely shut down. Then hold volume down and power button. You'll be able to enter boot loader. Also provide more details...version firmware, rom, etc
Click to expand...
Click to collapse
I can not. The only possible action is Power and he returns on the white screen.

c3scr33 said:
Are you flash a fw twice ?
Try to unlock bootloader and recovery again brother
Click to expand...
Click to collapse
Yes, twice. And it was ok. I do not have access to the bootloader

You don't provide enough details. But for me it seems like you flash firmware with stock recovery and if you have custom Rom the phone won't boot. Are you sure you are shutting down the phone properly? Then hold volume down for a second. Then WITHOUT release the volume button hold down power WITHOUT release anything till I boot to boot loader?

The phone vibrates once and nothing happens. Still the white screen.

hold power + vol up....if the phone reboots...hold vol down...

Alex-V you are THE GENIUS
Thank you very very very much :good:

ggreg said:
Alex-V you are THE GENIUS
Thank you very very very much :good:
Click to expand...
Click to collapse
nice that its working for you

[Q]Getting Error In installing cwm recovery from fastboot!

I want to install cwm recovery in my canvas a1 for backup my current rom android 4.4.4.
I m going to install lollipop 5.1 I heard about some bug in lollipop so for my safety i want a backup.
I used minimal adb and fastboot for installing cwm.
But when i type the command "fastboot flash recovery recovery.img"
End hit enter
Then it show a error.
"Failed (remote download for partition 'recovery' is not allowed'
What should i do now?

http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165
Go to this thread and follow the simple instructions...dnt go through such command prompts..when an easy way is available hit thanks if i helped

MaxySpark said:
I want to install cwm recovery in my canvas a1 for backup my current rom android 4.4.4.
I m going to install lollipop 5.1 I heard about some bug in lollipop so for my safety i want a backup.
I used minimal adb and fastboot for installing cwm.
But when i type the command "fastboot flash recovery recovery.img"
End hit enter
Then it show a error.
"Failed (remote download for partition 'recovery' is not allowed'
What should i do now?
Click to expand...
Click to collapse
Before flashing CWM recovery, you have to unlock the boot loader, using the command:
Code:
fastboot oem unlock
Then press Volume Up in phone to confirm.
Now you can flash.
Note: Unlocking bootloader formats the User data (/data partition), such as apps and other settings. Take a backup using Titanium Backup Tools, then proceed

Your recovery partition is locked.
1. Make yourself a developer (go to Settings -> About Phone -> Tap on Build until developer
2. In Developer options turn on Enable OEM unlock
3. Flash the new recovery, don forget to "fastboot oem unlock"
4. Important: don't allow phone to complete a normal reboot after flash. When rebooting, press Vol Up + Vol Down + Power to enter CWM recovery directly. Otherwise the stock recovery will replace CWM again.

When I type the command "fastboot oem unlock" and press enter, my phone displays a long-ish disclaimer text about the dangers of unlocking the bootloader, ending with the instruction to use Volume Up key to confirm ("YES, unlock...") or the Volume Down key to cancel ("NO, don't unlock..."). Pressing Volume Down works as expected: the line "returning to fastboot in 3secs" is displayed, followed by a return to fastboot. But pressing Volume UP seems to have NO EFFECT at all!! NOthing highlighted, no change in the screen, pressing power afterward does nothing. It is not a hardware problem of the Volume Up button either -- Volume Up/Down keys work in normal apps and in recovery mode just fine.
I was hoping that perhaps it just silently succeeded, but when i next try to flash the CWM recovery img, I still get 'sending recovery' OKAY but 'writing recovery' FAILED??
what do I do to get the volume UP to work while the phone in this mode??
BTW the phone is a Rook 4G phone from EE here in the UK. This is apparently the same as a ZTE Blade 3 A410 phone with carrier branding.
THANKS in advance for any help!

sbpetrack said:
When I type the command "fastboot oem unlock" and press enter, my phone displays a long-ish disclaimer text about the dangers of unlocking the bootloader, ending with the instruction to use Volume Up key to confirm ("YES, unlock...") or the Volume Down key to cancel ("NO, don't unlock..."). Pressing Volume Down works as expected: the line "returning to fastboot in 3secs" is displayed, followed by a return to fastboot. But pressing Volume UP seems to have NO EFFECT at all!! NOthing highlighted, no change in the screen, pressing power afterward does nothing. It is not a hardware problem of the Volume Up button either -- Volume Up/Down keys work in normal apps and in recovery mode just fine.
I was hoping that perhaps it just silently succeeded, but when i next try to flash the CWM recovery img, I still get 'sending recovery' OKAY but 'writing recovery' FAILED??
what do I do to get the volume UP to work while the phone in this mode??
BTW the phone is a Rook 4G phone from EE here in the UK. This is apparently the same as a ZTE Blade 3 A410 phone with carrier branding.
THANKS in advance for any help!
Click to expand...
Click to collapse
Hi, I have exactly the same situation!
No effect on Volume UP. I can't understand...

marc2800 said:
Hi, I have exactly the same situation!
No effect on Volume UP. I can't understand...
Click to expand...
Click to collapse
Absolutely identical experience here with the Alcatel One Touch Pop 3 - 5015x. I was following this tutorial http://forum.xda-developers.com/and...lcatel-one-touch-pop-s3-t3060092/post65430049, had a problem with the OEM, solved it by finding the top post on THIS thread and now I have the exact same issue as you two gentlemen. Any help would be appreciated, cus the phone seems bricked as it is. It's stuck in boot loop and receiving no input.

Thi is NOT the exact same issue as we have: you are stuck in a boot-loop; we have a version of fastboot which seems to have disabled the volumeUp button, thereby making it impossible to confirm our request to unlock the bootloader. e can only press VolumeDown (which cancels our request to unlock the bootloader).
i posted at http://forum.xda-developers.com/showpost.php?p=65462453&postcount=48 a suggestion for how to proceed in your case: just use SP Flash tools to reinstall a stock recovery image, and then use that recovery to install a complete stock ROM.
,BTW, Sir, when you say:
> ...with the Alcatel One Touch Pop 3 - 5015x. I ... had a problem with the OEM, solved it by finding the top post on THIS thread
note that the solution given in the top post of this thread is designed for Android One devices, and your Alcatel One Touch does NOT appear in the list of supported devices for that "fix." can't say it's entirely surprising that you would get into a bootloader problem if you apply top your phone a bootloader unlock solution for some random other platform!! LUck would not likely be with you when doing that.

zeta274 said:
Absolutely identical experience here with the Alcatel One Touch Pop 3 - 5015x. I was following this tutorial http://forum.xda-developers.com/and...lcatel-one-touch-pop-s3-t3060092/post65430049, had a problem with the OEM, solved it by finding the top post on THIS thread and now I have the exact same issue as you two gentlemen. Any help would be appreciated, cus the phone seems bricked as it is. It's stuck in boot loop and receiving no input.
Click to expand...
Click to collapse
I can't understand why volume down is working fine and not volume UP...

zeta274 said:
Absolutely identical experience here with the Alcatel One Touch Pop 3 - 5015x. I was following this tutorial http://forum.xda-developers.com/and...lcatel-one-touch-pop-s3-t3060092/post65430049, had a problem with the OEM, solved it by finding the top post on THIS thread and now I have the exact same issue as you two gentlemen. Any help would be appreciated, cus the phone seems bricked as it is. It's stuck in boot loop and receiving no input.
Click to expand...
Click to collapse
Go in bootloader mode, connect your phone to your computer and tell me what do you get if you tape in your console "fastboot devices"
I want to know the number before fastboot.. mine is strange and maybe not the original

MaxySpark said:
I want to install cwm recovery in my canvas a1 for backup my current rom android 4.4.4.
I m going to install lollipop 5.1 I heard about some bug in lollipop so for my safety i want a backup.
I used minimal adb and fastboot for installing cwm.
But when i type the command "fastboot flash recovery recovery.img"
End hit enter
Then it show a error.
"Failed (remote download for partition 'recovery' is not allowed'
What should i do now?
Click to expand...
Click to collapse
That is also my problem with my phone!
---------- Post added at 05:56 AM ---------- Previous post was at 05:54 AM ----------
GokulNC said:
Before flashing CWM recovery, you have to unlock the boot loader, using the command:
Code:
fastboot oem unlock
Then press Volume Up in phone to confirm.
Now you can flash.
Note: Unlocking bootloader formats the User data (/data partition), such as apps and other settings. Take a backup using Titanium Backup Tools, then proceed
Click to expand...
Click to collapse
Hi, I had done that fastboot oem unlock command and pressed Volume Up but nothing happened and my bootloader still locked could you help? Thanks, my phone is Starmobile UP HD MTK6582 :laugh:

GokulNC said:
Before flashing CWM recovery, you have to unlock the boot loader, using the command:
Code:
fastboot oem unlock
Then press Volume Up in phone to confirm.
Now you can flash.
Note: Unlocking bootloader formats the User data (/data partition), such as apps and other settings. Take a backup using Titanium Backup Tools, then proceed
Click to expand...
Click to collapse
really thanks:angel:

I can't
I have an error installing a ROM, partition x not allowed.
I can't go in recovery mode + I can't open my phone to enable usb debugging.
I don't have root & and I don't have my OEM unlocked.
How can I install my ROM for Asus Zenfone GO ZC500TG? :'( :'(

Anyone, please?!!

ADB devices allowed?
I have the same problem, but i just resolve it now. First, i've connected my phone in normal mode, then i opened cmd and wrote: adb devices, and a popup displayed in my phone to allow adb debug. I allowed and reboot to bootloader and follow all steps to unlock bootloader.

I also have problems, my phone is a polaroid turbo c4 plus and i cand get through the setup, so i can't install cwm and i am searching for methods to recover it, it's pretty hard since theres nothing online about it

Fastboot mode

Hello. In order to test a custom recovery for LG K420n I have to enter fastboot mode and then use the "fastboot oem unlock" command to unlock bootloader. The problem is I cannot enter fastboot mode. I tried all the possible commands and button combinations (http://www.hardreset.info/devices/lg/lg-k10-lte/fastboot-mode/). Anyone can help?

ZemoDroid said:
Hello. In order to test a custom recovery for LG K420n I have to enter fastboot mode and then use the "fastboot oem unlock" command to unlock bootloader. The problem is I cannot enter fastboot mode. I tried all the possible commands and button combinations (http://www.hardreset.info/devices/lg/lg-k10-lte/fastboot-mode/). Anyone can help?
Click to expand...
Click to collapse
Can u try the same steps, but: holding the Volume "UP" key for a few seconds

ZemoDroid said:
Hello. In order to test a custom recovery for LG K420n I have to enter fastboot mode and then use the "fastboot oem unlock" command to unlock bootloader. The problem is I cannot enter fastboot mode. I tried all the possible commands and button combinations (http://www.hardreset.info/devices/lg/lg-k10-lte/fastboot-mode/). Anyone can help?
Click to expand...
Click to collapse
the trick is to completely power down your device, then Hold down the volume up button (or down perhaps. i don't remember exactly) and then plug in the usb cable at the same time.. I figured it out when i was trying to root my device a few months ago and completely messed it up before using the lg pc bridge to recover it again

salaigeethan666 said:
the trick is to completely power down your device, then Hold down the volume up button (or down perhaps. i don't remember exactly) and then plug in the usb cable at the same time.. I figured it out when i was trying to root my device a few months ago and completely messed it up before using the lg pc bridge to recover it again
Click to expand...
Click to collapse
This is for download mode not fastboot.
Sent from my LG K10 using XDA Labs

ZemoDroid said:
This is for download mode not fastboot.
Sent from my LG K10 using XDA Labs
Click to expand...
Click to collapse
No. Fastboot does exist.. cos i entered it once.. im just unable to say whether it was vol down or up..

In ADB
adb devices
ENTER
if ok?
abd reboot bootloader
ENTER
you be fastboot mode.. (look display phone)
for unlock
fastboot oem unlock
ENTER
or
fastboot flashing unlock
ENTER
(in phone, press Vol UP)

erick0023 said:
In ADB
adb devices
ENTER
if ok?
abd reboot bootloader
ENTER
you be fastboot mode.. (look display phone)
for unlock
fastboot oem unlock
ENTER
or
fastboot flashing unlock
ENTER
(in phone, press Vol UP)
Click to expand...
Click to collapse
I tried that many times already. I need to unlock bootloader to enter fastboot but I can't enter it because of locked bootloader...loop.

ZemoDroid said:
I tried that many times already. I need to unlock bootloader to enter fastboot but I can't enter it because of locked bootloader...loop.
Click to expand...
Click to collapse
No. Locked bootloader doesn't screw you. It's able to boot into bootloader/fastboot mode even if it's been locked.

-power on device presing (vol- & power) until logo image appear, release and press again power key by the second
-format device screen apper.. chose : format yes , confirm
-just appear android image formating.. press the 3 key alternatively
-then enter to stock recovery ; and u can chose fastboot or sideloader mode
* i dont know the exactly combination key press. but u must try a couple intents..

mosta00 said:
-power on device presing (vol- & power) until logo image appear, release and press again power key by the second
-format device screen apper.. chose : format yes , confirm
-just appear android image formating.. press the 3 key alternatively
-then enter to stock recovery ; and u can chose fastboot or sideloader mode
* i dont know the exactly combination key press. but u must try a couple intents..
Click to expand...
Click to collapse
That doesnt work for newer phones.
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
berkantkz said:
No. Locked bootloader doesn't screw you. It's able to boot into bootloader/fastboot mode even if it's been locked.
Click to expand...
Click to collapse
How?

its worked on my LG k10 430H (mtk divice)

mosta00 said:
its worked on my LG k10 430H (mtk divice)
Click to expand...
Click to collapse
How?

mosta00 said:
-power on device presing (vol- & power) until logo image appear, release and press again power key by the second
-format device screen apper.. chose : format yes , confirm
-just appear android image formating.. press the 3 key alternatively
-then enter to stock recovery ; and u can chose fastboot or sideloader mode
* i dont know the exactly combination key press. but u must try a couple intents..
Click to expand...
Click to collapse
pvineeth97 said:
How?
Click to expand...
Click to collapse
This! works for me, (dont release "vol - key"; just "power key by a second")

this works for me
pvineeth97 said:
How?
Click to expand...
Click to collapse
-power on device presing (vol- & power) until logo image appear, release and press again power key by the second
-format device screen apper.. chose : format yes , confirm
-just appear android image formating.. press vol- & power, and just after that vol+ till u see text about formating
let it finish and then it will show up recovery screen. choose reboot into bootloader, connect it to pc, open cmd and boot into twrp

ilicu33 said:
-power on device presing (vol- & power) until logo image appear, release and press again power key by the second
-format device screen apper.. chose : format yes , confirm
-just appear android image formating.. press vol- & power, and just after that vol+ till u see text about formating
let it finish and then it will show up recovery screen. choose reboot into bootloader, connect it to pc, open cmd and boot into twrp
Click to expand...
Click to collapse
It might be easy in MTK but not in Qualcomm lol. We even tried "adb reboot recovery". It just shows a dead android symbol. But even randomly pressing those buttons doesn't allow us to go into recovery. MTK users have a upper hand lol.

ilicu33 said:
-power on device presing (vol- & power) until logo image appear, release and press again power key by the second
-format device screen apper.. chose : format yes , confirm
-just appear android image formating.. press vol- & power, and just after that vol+ till u see text about formating
let it finish and then it will show up recovery screen. choose reboot into bootloader, connect it to pc, open cmd and boot into twrp
Click to expand...
Click to collapse
Urs MTK?

tick oem unlock
ZemoDroid said:
I tried that many times already. I need to unlock bootloader to enter fastboot but I can't enter it because of locked bootloader...loop.
Click to expand...
Click to collapse
make sure you ticked the OEM unlock and USB debugging at the developer option

ilicu33 said:
-power on device presing (vol- & power) until logo image appear, release and press again power key by the second
-format device screen apper.. chose : format yes , confirm
-just appear android image formating.. press vol- & power, and just after that vol+ till u see text about formating
let it finish and then it will show up recovery screen. choose reboot into bootloader, connect it to pc, open cmd and boot into twrp
Click to expand...
Click to collapse
Hello, could you be more precise please. Everything is clear till you press Confirm over "Factory reset" - after that I got colorful ring with "Erasing" sign for a few seconds and then - long run on LG logo before system boots. When and what should I press, to get into bootloader?

same problem here I have qualicom LGK10 420DS I have followed saveral method to enter into recovery but didn't workout.
can some one help with correct steps.
---------- Post added at 01:43 PM ---------- Previous post was at 01:22 PM ----------
vj4mqntm said:
same problem here I have qualicom LGK10 420DS I have followed saveral method to enter into recovery but didn't workout.
can some one help with correct steps.
Click to expand...
Click to collapse
Hi!
I have a LGK10 420DS (m216) MSM8916 Indian version I am unable to boot into bootloader or recovery by using adb / fastboot or by volume and power kay, as you are aware LG is not supporting any software update. I want to flash CustomROM and trying to unlock bootloader with different method but unable to enter in recovery, plz. some one can help out.

volume - whilst pluging usb into computer = fastboot mode
volume + whilst plugging = download mode
this works in new models, tested in a lg aristo 2

ROOT Elephone S7 4gb on Windows 10x64 at last!

For those that, like me, could not get driver recognition on the latest Win 10 x64 no matter what you tried. And ,yes, using every tutorial I could find on this and two "other Forums". Odin failed to see my device (still can't) Cydia impactor allows rebooting into fastboot and D/L but doesn't connect in either alt. mode. Yes, drivers all removed and replaced in varying states (usbdeview, etc.).
But ADB/Fastboot works!
Make sure you have your adb/fastboot drivers installed universally (Check this Fabulous Forum)
Download device-specific TWRP - I used this one for the 4gb version - https://www.dropbox.com/s/b7u3k1mgpppxlyx/recovery.img?dl=0
L.Shift-R. click in the folder you downloaded to (Open Command Window Here) - "adb devices" (to make sure device registers) then - "adb reboot bootloader" gets you into fastboot. - "fastoot boot {your-recovery-name}.img"
I got a fully functional TOUCH CAPABLE TWRP. Which I proceeded to load this - https://www.dropbox.com/s/j1owqv7mjkdpo75/UPDATE-SuperSU-v2.46.zip?dl=0 - and, VOILA! ROOT!!

I had similar issues with my laptop and drivers. Used a friend laptop in the end to "see" the phone and install twrp.
Sent from my S7 using Tapatalk

When I try to boot the recovery.img with fastboot it says that my OEM is locked. I check OEM unlock in developer options, then I do: adb reboot bootloader, then fastboot oem unlock. A warning appears saying to press VOLUME UP button to continue, voiding the warranty or VOLUME DOWN to go back. I try to press VOLUME UP and nothing happens... how did you do it?

vaskovass said:
When I try to boot the recovery.img with fastboot it says that my OEM is locked. I check OEM unlock in developer options, then I do: adb reboot bootloader, then fastboot oem unlock. A warning appears saying to press VOLUME UP button to continue, voiding the warranty or VOLUME DOWN to go back. I try to press VOLUME UP and nothing happens... how did you do it?
Click to expand...
Click to collapse
Hi there, I have the same issue. No success

I found a way, instead of volume up, use the home button this worked for me.. however after I unlocked the OEM and flashed TWRP the phone didn't want to boot anymore. It was stuck on Elephone logo with warning: "Orange State: The phone has been unlocked and can't be trusted. Your device will boot in 5s", however it didn't boot and stayed like that for almost an hour. Had to flash back the stock firmware to boot. Tried 1 more time the procedure to root but again the same. Maybe I do something wrong?

stock fw flash back
Hi, please can you help me with how you flashed back the stock firmware?
I get an error message with twrp : invalid zip file format.
Thank you in advance!

dnsgtr said:
Hi, please can you help me with how you flashed back the stock firmware?
I get an error message with twrp : invalid zip file format.
Thank you in advance!
Click to expand...
Click to collapse
I read somewhere the is a zip inside the update.zip & is that one that is flash able with twrp.
Have a look

During the main time I managed to flash the 0218 stock rom.
I still got the orange message but the phone finally boot. Then I just called the twrp recovery img via atb. I did nothing only touch the reboot in the twrp screen and since then "Orange status...." again.
May be the twrp recovery img is not the right one...

Bad command "fastoot boot {your-recovery-name}.img"
after OEM alow (informacion phone/compilacion number touch fast 9 times/access/alow oem)
fastboot oem unlock
"fastboot boot {your-recovery-name}.img" for me is fastboot boot recovery.img and all OK
bat still not working (phone not thrust unlocked bootloader cleaning data in 5..4..3..2..1.. and rebot)

How to unlock FRP ?

Hi
I was trying to add a custom rom and root my honor 7x.
So i installed a twrp-like recovery (with success), and with that, i sucessfully installed a new ROM.
But now my home folder (/storage/emulated/0) is not writable and seems to be encrypted :/
I cannot do a factory reset or install a new ROM:
- when i go to fastboot mode, i have:
- PHONE Unlocket
- FRP Lock
So i cannot flash anything with fastboot, and my recovery is no more accessible (don't know why...)
My question is, how can i unlock the FRP ?
Thank you very much,
boehm_e

boehm_e said:
Hi
I was trying to add a custom rom and root my honor 7x.
So i installed a twrp-like recovery (with success), and with that, i sucessfully installed a new ROM.
But now my home folder (/storage/emulated/0) is not writable and seems to be encrypted :/
I cannot do a factory reset or install a new ROM:
- when i go to fastboot mode, i have:
- PHONE Unlocket
- FRP Lock
So i cannot flash anything with fastboot, and my recovery is no more accessible (don't know why...)
My question is, how can i unlock the FRP ?
Thank you very much,
boehm_e
Click to expand...
Click to collapse
Look in developer options, the "enable OEM unlock" switch is the "frp lock"
You might already know but I will say anyway just in case.
To boot recovery while phone is rebooting unplug USB and press volume up
To boot from adb use "adb reboot recovery"
From terminal app on phone "reboot recovery"
From powered off, make sure USB in unplugged hold volume up and power

mrmazak said:
Look in developer options, the "enable OEM unlock" switch is the "frp lock"
You might already know but I will say anyway just in case.
To boot recovery while phone is rebooting unplug USB and press volume up
To boot from adb use "adb reboot recovery"
From terminal app on phone "reboot recovery"
From powered off, make sure USB in unplugged hold volume up and power
Click to expand...
Click to collapse
Thank you for your reply.
Yes i know for the oem option in developper mode, but this option is grayed out (and enabled) but the frp is still locked :/
I also know about rebooting to recovery, but this is the default Honor recovery (nothing very usefull).
I tried the dload folder method (by putting an update.app into dload folder of my sdcard and then booting with + and - and power, but the update failes at 5%. It must be because of the frp lock).
Thank you

boehm_e said:
Thank you for your reply.
Yes i know for the oem option in developper mode, but this option is grayed out (and enabled) but the frp is still locked :/
I also know about rebooting to recovery, but this is the default Honor recovery (nothing very usefull).
I tried the dload folder method (by putting an update.app into dload folder of my sdcard and then booting with + and - and power, but the update failes at 5%. It must be because of the frp lock).
Thank you
Click to expand...
Click to collapse
I keep seeing this frp lock issue, comes uP after a reset in twrp or attempted exposed install, some other system change.
Are you on stock ROM and stock recovery?
If so can try to relock bootloader, that will make OEM toggle not greyed anymore. Then can make it off and back on.
Then unlock bootloader again
But only relock if on unchanged stock

I already tried to lock the bootloader again, with no success (probably bcs of the frp lock itself)
:/

Hi
I have same issue too.
How I can relock bootloader and then unlock it?