Hey, recently I booted up my phone and it said custom binary locked by frp lock, or something along those lines, since then I came a lot further/closer to fixing it. As now when I boot it up says: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
When i try to download/reflash new software it fails because it's blocked by FRP lock, anyway to fix this?
Thanks in advance.
Achlyss said:
Hey, recently I booted up my phone and it said custom binary locked by frp lock, or something along those lines, since then I came a lot further/closer to fixing it. As now when I boot it up says: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
When i try to download/reflash new software it fails because it's blocked by FRP lock, anyway to fix this?
Thanks in advance.
Click to expand...
Click to collapse
Can u flash original firmware via odin?
FaisalR29 said:
Can u flash original firmware via odin?
Click to expand...
Click to collapse
No, because I get blocked by the frp lock
Extract the firmware with a different archiver.
Ensure the download hasn't been interrupted and download it with something else.
Otherwise, the firmware might actually not be original. It has to be a stock touchwiz/samsung experience rom to pass FRP (in Odin). Not a custom rom.
Bryan48765 said:
Extract the firmware with a different archiver.
Ensure the download hasn't been interrupted and download it with something else.
Otherwise, the firmware might actually not be original. It has to be a stock touchwiz/samsung experience rom to pass FRP (in Odin). Not a custom rom.
Click to expand...
Click to collapse
Hmm, it could be that, but do you have any idea on where to get stock firmware with speeds higher than 15 Kbps
Achlyss said:
Hmm, it could be that, but do you have any idea on where to get stock firmware with speeds higher than 15 Kbps
Click to expand...
Click to collapse
Even though 15 is written, actual speeds should be much higher than 15 and resumable.
Bryan48765 said:
Even though 15 is written, actual speeds should be much higher than 15 and resumable.
Click to expand...
Click to collapse
I just found another way to download the firmware, and it worked! Thank you so much, although now i don't have a proper excuse to buy the OnePlus 6T
Achlyss said:
I just found another way to download the firmware, and it worked! Thank you so much, although now i don't have a proper excuse to buy the OnePlus 6T
Click to expand...
Click to collapse
I have same problem bro... please help me how you fixed it?
Ulic said:
I have same problem bro... please help me how you fixed it?
Click to expand...
Click to collapse
Hey man, i just downloaded the official firmware, and flashed it regurarly through odin, you have to make sure the firmware is stock, otherwise it will not work.
Hey, could you tell me where you downloaded the firmware faster?
Hifty said:
Hey, could you tell me where you downloaded the firmware faster?
Click to expand...
Click to collapse
I used this tool https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 even though it says its deprecated it still worked fine for me.
Updato.com
Related
WHATS THIS?
This is my port of CF-AUTOROOT for the Samsung Galaxy TAB E.
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE or a TWRP backup in case of problems. This will trip the knox counter.
Flash with ODIN 3.10.7 in the AP slot.
Load the respective file below into the AP slot and hit start.
cfautoroot_sm-t377p.tar
cfautoroot_sm-t560nu.tar
NOTE: ON SOME 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
STOCK TWRP IMAGE FOR SM-T377P
This is a link to the stock system, boot, modem image for the T377P in case anyone needs it. Needs to be restored with twrp.
Thanks to @shawn1976 for providing this.
https://www.dropbox.com/s/skuwsbzm2zigd83/sm-T377PVPU1AOJ5-boot-system-modem-only.zip?dl=0
Credits: Chainfire and my testers - Phrozen99 and nates730
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
FRP lock
Any suggestions on getting pass an FRP lock? My niece tried to root it but didn't turn on the enable OEM unlock. I just literally got it so don't have a back up and stock rom is no where I can find online even tried the Samsung Switch software and the T377P is not an option.
Jasn7766 said:
Any suggestions on getting pass an FRP lock? My niece tried to root it but didn't turn on the enable OEM unlock. I just literally got it so don't have a back up and stock rom is no where I can find online even tried the Samsung Switch software and the T377P is not an option.
Click to expand...
Click to collapse
Isn't there a recovery mode in the SS software that allows the firmware to be reflashed?
ashyx said:
Isn't there a recovery mode in the SS software that allows the firmware to be reflashed?
Click to expand...
Click to collapse
That was my plan ...however they do not support this model number yet so its not available to be reflashed. I checked sammobile as well figuring I could download firmware and use Odin to reflash and same situation.
There's a chance the sm-t377R4 firmware may flash as it's practically identical to the sprint firmware just a different csc.
Okay....will try and find that one.
Hi, I had a question. The Samsung Tab E is my first android device (I am a IOS user, so i know how to Jailbreak, but I don't know how to root!). My friend told me to root it, but I don't really know how to do it. Can you post a step by step tutorial. Also, after i rooted can i update my device to a newer version or do i have to remove the root. Lastly, how do you back up your device? Thank you! I appreciate your hard work!
Badob said:
Hi, I had a question. The Samsung Tab E is my first android device (I am a IOS user, so i know how to Jailbreak, but I don't know how to root!). My friend told me to root it, but I don't really know how to do it. Can you post a step by step tutorial. Also, after i rooted can i update my device to a newer version or do i have to remove the root. Lastly, how do you back up your device? Thank you! I appreciate your hard work!
Click to expand...
Click to collapse
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
http://techchomps.com/how-to-root-the-samsung-galaxy-tab-a-9-7/
ashyx said:
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
Click to expand...
Click to collapse
Thanks Man!!! Had some last questions: Can i update my device to a newer version (if available) or do i have to remove the root and how do you back up your device? Thank you again!
Badob said:
Thanks Man!!! Had some last questions: Can i update my device to a newer version (if available) or do i have to remove the root and how do you back up your device? Thank you again!
Click to expand...
Click to collapse
You can update your device with odin anytime you want but not via ota.
To back up you device you need to install TWRP.
Search Google for info on using TWRP.
ashyx said:
You can update your device with odin anytime you want but not via ota.
To back up you device you need to install TWRP.
Search Google for info on using TWRP.
Click to expand...
Click to collapse
Thanks For the help!
Where do I get TWRP for Tab E T560, and how do I install it?
Thank you.
Edit: Found the answer.
ashyx said:
There's a chance the sm-t377R4 firmware may flash as it's practically identical to the sprint firmware just a different csc.
Click to expand...
Click to collapse
I tried the t377R4 firmware that didn't work. Any idea on where I could track down a copy of the t377p? Odd I can't even use the Samsung Smart Switch or even Kies as it doesn't recognize the model number. Or if anyone has a backup available they can share please let me know.
I have a US Cellular Samsung Tab E SM-T377R4 and I rooted it using the procedure below. The root process went fine and everything is working well except Recovery Mode does not work. It just boots to a black blank screen when I try to go to Recovery Mode. But that's no big deal to me.
ashyx said:
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
http://techchomps.com/how-to-root-the-samsung-galaxy-tab-a-9-7/
Click to expand...
Click to collapse
Stevenwsmith said:
I have a US Cellular Samsung Tab E SM-T377R4 and I rooted it using the procedure below. The root process went fine and everything is working well except Recovery Mode does not work. It just boots to a black blank screen when I try to go to Recovery Mode. But that's no big deal to me.
Click to expand...
Click to collapse
Surprised recovery doesn't work, considering the 2 devices are identical specs.
Try installing Twrp, you'll probably find that works OK.
Jasn7766 said:
I tried the t377R4 firmware that didn't work. Any idea on where I could track down a copy of the t377p? Odd I can't even use the Samsung Smart Switch or even Kies as it doesn't recognize the model number. Or if anyone has a backup available they can share please let me know.
Click to expand...
Click to collapse
Same problem here... I've been looking all over for a copy of the SM-T377P stock ROM. Anyone that happens to have a copy/link for it please share.
JohnICon said:
Same problem here... I've been looking all over for a copy of the SM-T377P stock ROM. Anyone that happens to have a copy/link for it please share.
Click to expand...
Click to collapse
What's the issue?
Rooting gone bad... Rooted my SM-T377P with KingRoot and there is an FRP Lock that comes up a week later. All of the custom ROM versions I have keep getting rejected by ODIN every time I try to flash them. The only other way I can think of doing this is to flash the stock ROM for the device.
JohnICon said:
Rooting gone bad... Rooted my SM-T377P with KingRoot and there is an FRP Lock that comes up a week later. All of the custom ROM versions I have keep getting rejected by ODIN every time I try to flash them. The only other way I can think of doing this is to flash the stock ROM for the device.
Click to expand...
Click to collapse
You realise you can't flash a custom rom with odin?
Also when you flash the stock t377r4 firmware what part fails?
The aboot fails every time I try to flash it
Here is Stock Oreo directly from Samsung for the Samsung Galaxy S7 Unlocked Varient via Odin.
AP_G930UUEU4CRG2_CL13710148_QB18808851_REV02_user_ low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU4CRG2_CL13710148_QB18808851_REV02_user_ low_ship_MULTI_CERT.tar.md5
CP_G930UUEU4CRG2_CP10090194_CL13710148_QB18808851_ REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM4CRG2_CL13710148_QB18808851_REV02_ user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM4CRG2_CL13710148_QB18808851_R EV02_user_low_ship_MULTI_CERT.tar.md5
Link: https://drive.google.com/open?id=1JDcHy6M7rmdoPsXM62Q3KNaoZ6DlAZb5
Don't forget to factory reset and clear the caches via Recovery after you flash.
Enjoy!
Phone performance after oreo rom update
Please share your experiences of s7 after updating to android oreo through this rom.
mjbajwa said:
Please share your experiences of s7 after updating to android oreo through this rom.
Click to expand...
Click to collapse
Zero problems. Zero bloatware. Volte and wifi calling works.
aarongotgame said:
Zero problems. Zero bloatware. Volte and wifi calling works.
Click to expand...
Click to collapse
How about the battery drain issue that affected the S7 on some networks since the 2nd Oreo update last month?
See this thread on the samsung forum: https://eu.community.samsung.com/t5/Smartphones-Tablets-Wearables/Cell-Standby-Android-System-Google-Play-Services-battery-drain/td-p/547434/page/59
Robotson said:
How about the battery drain issue that affected the S7 on some networks since the 2nd Oreo update last month?
See this thread on the samsung forum: https://eu.community.samsung.com/t5/Smartphones-Tablets-Wearables/Cell-Standby-Android-System-Google-Play-Services-battery-drain/td-p/547434/page/59
Click to expand...
Click to collapse
Not sure, I just charge my phone when needed. I've never had an update or ota notification. I flashed this rom thirty minutes after it was officially released and I've been using it ever since with no problems. I'm still on CRG2 and I don't see this second Oreo update for the 930u
aarongotgame said:
Not sure, I just charge my phone when needed. I've never had an update or ota notification. I flashed this rom thirty minutes after it was officially released and I've been using it ever since with no problems. I'm still on CRG2 and I don't see this second Oreo update for the 930u
Click to expand...
Click to collapse
Oh right ok. So when was this ROM released by Samsung?
Robotson said:
Oh right ok. So when was this ROM released by Samsung?
Click to expand...
Click to collapse
The same day I uploaded it to xda
I bought a Galaxy S7 from this scammer on craigslist. It won't boot and was showing "an error has occurred while updating the device software". I did volume down+power+home buttons and it comes back to recovery mode. I selected factory reset and few other options, I just get "failed to mount /system (Invalid argument )" message. Can someone please help resolve this issue? I believe I need to flash with factory image but I don't know the history of this phone. I'd really appreciate some help.
Thanks.
kimbhoot said:
I bought a Galaxy S7 from this scammer on craigslist. It won't boot and was showing "an error has occurred while updating the device software". I did volume down+power+home buttons and it comes back to recovery mode. I selected factory reset and few other options, I just get "failed to mount /system (Invalid argument )" message. Can someone please help resolve this issue? I believe I need to flash with factory image but I don't know the history of this phone. I'd really appreciate some help.
Thanks.
Click to expand...
Click to collapse
Go to download mode and try to reinstall the firmware if you can
kimbhoot said:
I bought a Galaxy S7 from this scammer on craigslist. It won't boot and was showing "an error has occurred while updating the device software". I did volume down+power+home buttons and it comes back to recovery mode. I selected factory reset and few other options, I just get "failed to mount /system (Invalid argument )" message. Can someone please help resolve this issue? I believe I need to flash with factory image but I don't know the history of this phone. I'd really appreciate some help.
Thanks.
Click to expand...
Click to collapse
Just flash s7 firmware. Nougat or Oreo will work. None of that other stuff matters.
can you flash this by twrp ??
Does it work for G930V and G930
Does it work for G930V and G930
freecore.minecraft said:
Does it work for G930V and G930
Click to expand...
Click to collapse
This is the unlocked 930u firmware. 930v is Verizon. Flash it and find out. The 930 is the phone itself. Not quite sure what you mean by the 930. Thinking maybe u mean 935v which is the s7 edge
aarongotgame said:
This is the unlocked 930u firmware. 930v is Verizon. Flash it and find out. The 930 is the phone itself. Not quite sure what you mean by the 930. Thinking maybe u mean 935v which is the s7 edge
Click to expand...
Click to collapse
It says theyre unlocked, and I can install a 930u custom rom if it works?
freecore.minecraft said:
It says theyre unlocked, and I can install a 930u custom rom if it works?
Click to expand...
Click to collapse
Yes
Secure Folder
Secure Folder, Samsung Health will work on this firmware?
r.prvnraj said:
Secure Folder, Samsung Health will work on this firmware?
Click to expand...
Click to collapse
Why wouldn't it? This is official Samsung firmware
aarongotgame said:
Just flash s7 firmware. Nougat or Oreo will work. None of that other stuff matters.
Click to expand...
Click to collapse
Thanks for your response. I found some video that explains how to bypass google lock (FRP Bypass). I had to load a combination firmware that allowed me to change the setting and enable developer mode. after that, I loaded firmware for this phone but it's in a reboot cycle. phone boots up fully, welcome screen, I start setting up the phone and BAM.. it reboots and that viscous cycle repeats.
Please advise.
kimbhoot said:
Thanks for your response. I found some video that explains how to bypass google lock (FRP Bypass). I had to load a combination firmware that allowed me to change the setting and enable developer mode. after that, I loaded firmware for this phone but it's in a reboot cycle. phone boots up fully, welcome screen, I start setting up the phone and BAM.. it reboots and that viscous cycle repeats.
Please advise.
Click to expand...
Click to collapse
Might need to attempt a reflash. Before that go into recovery and wipe n clear caches then do a factory reset
aarongotgame said:
This is the unlocked 930u firmware. 930v is Verizon. Flash it and find out. The 930 is the phone itself. Not quite sure what you mean by the 930. Thinking maybe u mean 935v which is the s7 edge
Click to expand...
Click to collapse
Can unlock 930u edition 930 T-Mobile ?
Stock Firmware:
A105FDDU1ASC2
Combination Firmware:
FA90 A105FXXU1ASB6
Extract the firmware with 7zip
Use odin to flash it as per normal
Cool... Thanks man...
what is a combination firmware
How about A105g/ds?
Root/recovery
hello guys, is there any way to root and install custom recovery (TWRP) on galaxy A10 (A105F) or any one working on it ?
i've been searching the web for last two days and i found nothing really work
thank u guys
brahimlagdem said:
hello guys, is there any way to root and install custom recovery (TWRP) on galaxy A10 (A105F) or any one working on it ?
i've been searching the web for last two days and i found nothing really work
thank u guys
Click to expand...
Click to collapse
Did you find a twrp file to flash SM-A105F device ?
Any news about developping/availability of SM-A105F twrp file ? I hope Someone will be able to help with this (growing number of user as noticed on the internet)
Hh
timba123 said:
Hi. I have the metro pcs variant 10e. Our oem unlocking in developer options has been hidden/disabled/missing. Is the a10f the same as far as my metro variant? Also when trying to get into bootloader mode the phone vibrated and a little yellow exclamation ! symbol appeared at bottom of my screen right above the charging port. What was that exactly? This is my 1st A series device
Click to expand...
Click to collapse
even if its the same you cant unlock the bl or root as its a usa variant and its not allowed.
the yellow symbol you see is normal.. its an indicator for the charging i believe to indicate slow charging for example
deadman96385 said:
Stock Firmware:
A105FDDU1ASC2
Combination Firmware:
FA90 A105FXXU1ASB6
Extract the firmware with 7zip
Use odin to flash it as per normal
Click to expand...
Click to collapse
you do know flashing combo firmware now requires factory approval in the form of a token right?
elliwigy said:
you do know flashing combo firmware now requires factory approval in the form of a token right?
Click to expand...
Click to collapse
I don't really follow Samsung much anymore, when this was posted the phone was new and I had access to both and both firmwares weren't available anywhere so I posted it in case it would help someone.
timba123 said:
I have metro ASK4 firmware currently on phone. I found official ASK1 4 file firmware . When trying to downgrade I get SHA256 error. So locked bootloader prevents it? Cant even downgrade. What can I look into as far as changing property values sys.oem_unlock_allowed 1 temporarily if anything? I do apologize if my questions annoy the more experienced members. I used adb shell setprop and it added it but theres 2. One with 0 and one with 1
Click to expand...
Click to collapse
That's because you spelled it wrong bro lol.. it also doesn't do anything unfortunately and reverts after you reboot the device.
You cannot downgrade.. most time even on unlocked bl's downgrading is not allowed.
If you mean you found a lower firmware on same rev that's a different story. You get sha error because you need a modified odin that has the sha checks disabled.. or you can use something like chimera tool
timba123 said:
Lol I see my spelling error now. I think I was really burned out trying to learn and figure out stuff. Is there any decent links on how to patch SHA256? I tried many web searches and little results
Click to expand...
Click to collapse
huh? thats not useful at all lol.. theres already pstched odins all over the internet.. it doesnt patch the firmware, it patches odin software so it ignores the sha256 altogether
timba123 said:
Yes there are many patched Odin's but not a patched 3.14 version. My device will not work with any odin lower than 3.14
Click to expand...
Click to collapse
i forgot lol.. i also have an a10e but i use chimera tool and it works fine and no sha checks if u select that ootion
Sent from my SM-G977P using Tapatalk
timba123 said:
Unfortunately I cant afford any tool like that. I've tried crack versions that dont require box or card but none of them are current cracks.
Click to expand...
Click to collapse
crack talk is also not allowed on xda lol
Sent from my SM-G977P using Tapatalk
timba123 said:
Thanks. I downloaded official version. Pay day I'm going to try a starter license. I'm a little excited lol. Do you know if it flashes combo on a10e?
Click to expand...
Click to collapse
it does/doesnrt.. u cant just flash combo firm to the device, it also has nothing to do with odin or chimera.. samsung implemented security so combo firm cannot b flashed unless you have a token for it.. without it u can only flash stock firmware.. if u got acombo token tho then yes, chimera at that point could flash combo no problem
Hello all. I recently recieved a S9 from a friend that said it was FRP locked and thought I could fix it. But every single combination file I try to flash to it, I always get a "FAIL!" message in Odin. I would assume it isn't working because the most recent OS is installed (which is G965WVLS7CSJ6 i think)? If someone could help me out, that would be wonderful.
Fortnite_Will_Die said:
Hello all. I recently recieved a S9 from a friend that said it was FRP locked and thought I could fix it. But every single combination file I try to flash to it, I always get a "FAIL!" message in Odin. I would assume it isn't working because the most recent OS is installed (which is G965WVLS7CSJ6 i think)? If someone could help me out, that would be wonderful.
Click to expand...
Click to collapse
You need a combination matching with the bootloader version, what is ur bootloader version?
kpwnApps said:
You need a combination matching with the bootloader version, what is ur bootloader version?
Click to expand...
Click to collapse
How would I go about checking the bootloader version? Recovery mode? is it this? "G965WVLS7CSJ6"
Fortnite_Will_Die said:
How would I go about checking the bootloader version? Recovery mode? is it this? "G965WVLS7CSJ6"
Click to expand...
Click to collapse
Your Bl version is 7 G965WVLS7CSJ6
ZeroXO said:
Your Bl version is 7 G965WVLS7CSJ6
Click to expand...
Click to collapse
So, where can I find the combination file for my version? Because I've looked all over the internet with no luck
Edit: I think I found a website that I can maybe use for the combination file. Would any of them work?
URL: https://romdl.net/rom/samsung-galaxy-s9-sm-g965w/#combination-files
Edit 2: All the combination files links are dead. Would there be any way to downgrade the phone then flash a combination file?
Tried everything. Searched through the webs for past couple of days. Everything failed.
Majority of articles are from times of Ancient Rome. None work and are outdated.
Reflashed stock with nand erase and pit file. Checked and failed.
Tried root related solutions? Checked and failed.
Searched modem file. Failed.
Downgrade to prev version? No longer plausible. Due to BIT.
I flashed and reflashed with odin numerious of times. Nothing. Useless. Absolutely useless.
did u solve it?
Did you guys find anything? I think I'm gonna go check at a repair shop for someone with the z3x box and hope for the best.
Mighty_Rearranger said:
Did you guys find anything? I think I'm gonna go check at a repair shop for someone with the z3x box and hope for the best.
Click to expand...
Click to collapse
any luck?
dronkit said:
any luck?
Click to expand...
Click to collapse
Nope, he said no matter what rom he flashed it was always unknown IMEI.
However I found something interesting, turns out my IMEI and baseband numbers are intact when I check them from recovery. Maybe downgrading this phone should fix that, although I'm not sure if it is possible.
Mighty_Rearranger said:
Nope, he said no matter what rom he flashed it was always unknown IMEI.
However I found something interesting, turns out my IMEI and baseband numbers are intact when I check them from recovery. Maybe downgrading this phone should fix that, although I'm not sure if it is possible.
Click to expand...
Click to collapse
no, its not possible because of the bit.... can you try using an old modem to see if it solves the problem?
applesucksLmao said:
no, its not possible because of the bit.... can you try using an old modem to see if it solves the problem?
Click to expand...
Click to collapse
You mean like flashing an older modem? How can I do that?
Mighty_Rearranger said:
You mean like flashing an older modem? How can I do that?
Click to expand...
Click to collapse
its the CP file in odin
try flashing one from may or august.. don't try november or newer
You need to download an older firmware (older than november, never try that ****ty november update!) of your country's a32 and use just the cp file
applesucksLmao said:
You need to download an older firmware (older than november, never try that ****ty november update!) of your country's a32 and use just the cp file
Click to expand...
Click to collapse
I'll get an older firmware from sammobile and get back to you if anything different happens. Just as a note, someone here on XDA said they were able to downgrade when using a Magisk altered ROM.
Edit: I found something similar on another samsung phone here on XDA: thread here.
Mighty_Rearranger said:
I'll get an older firmware from sammobile and get back to you if anything different happens. Just as a note, someone here on XDA said they were able to downgrade when using a Magisk altered ROM.
Edit: I found something similar on another samsung phone here on XDA: thread here.
Click to expand...
Click to collapse
Could you flash it with a magisk modified rom?
@Mighty_Rearranger maybe you could try flashing an android 12 gsi? https://forum.xda-developers.com/t/...sing-odin-without-twrp-phh-lineageos.4114435/ I don't have the phone with me right now so I can't test it
applesucksLmao said:
You need to download an older firmware (older than november, never try that ****ty november update!) of your country's a32 and use just the cp file
Click to expand...
Click to collapse
OK I tried doing that and now phone is bootlooping with secure check fail md1img error, that's the anti-downgrade thing complaining. No luck down the downgrade hallway.
I think the only option is to wait for a possible solution from the Magisk people or check if a future update somehow fixes the problem.
Mighty_Rearranger said:
Nope, he said no matter what rom he flashed it was always unknown IMEI.
However I found something interesting, turns out my IMEI and baseband numbers are intact when I check them from recovery. Maybe downgrading this phone should fix that, although I'm not sure if it is possible.
Click to expand...
Click to collapse
how do you check them from recovery? I was able to see them once after a botched flashing, entering download mode, there was a "show barcode" option or something like that.
I have read in an older thread in this forum, some guy solved it by downgrading, but to a version which is impossible to downgrade to for us, because our phones already came with the AUJ4 firm, and acannot go back.
applesucksLmao said:
@Mighty_Rearranger maybe you could try flashing an android 12 gsi? https://forum.xda-developers.com/t/...sing-odin-without-twrp-phh-lineageos.4114435/ I don't have the phone with me right now so I can't test it
Click to expand...
Click to collapse
what's the idea? there aren't any custom roms, are there?
or you mean this way it could be possible to downgrade?
dronkit said:
what's the idea? there aren't any custom roms, are there?
or you mean this way it could be possible to downgrade?
Click to expand...
Click to collapse
if someone manages to create twrp for a32 4g maybe there's a way back
applesucksLmao said:
if someone manages to create twrp for a32 4g maybe there's a way back
Click to expand...
Click to collapse
TWRP lets you bypass the binary version check?
Mighty_Rearranger said:
TWRP lets you bypass the binary version check?
Click to expand...
Click to collapse
i don't know probably, and we could get a backup from someone with a not fricked phone and edit it to our imeis