Has anyone Repaired their Pixel XL? and how was it? - Google Pixel XL Questions & Answers

I need a new daughterboard because this morning my phone stopped charging. Well I can't decide if I should go and pay someone $80 to do it for me or to do it myself. I've never paid for anyone to repair anything for me before I've always done it myself and I have most of the tools I need to do it (aside from a heat gun) . What has me nervous is taking the screen off. Has anyone else done this and how does it look after? Also did you break the glass?
I just remember the fiasco and mess of replacing my fist iPad Air 2 screen and it seems to be similar. I just don't want a half working phone when I'm done (but also at this point I could've bought a pixel 2 XL with what it's costing me)
So thanks if you have any feedback

I've put 3 screens 1 new daughterboard 1 notification led and put the black glass on the white frame.
Just use plenty of heat, and take your time.
Edit: I broke the glass one time, removing the screen from the top first.
I would recommend a bottom corner as your starting point.
Edit, edit: I just saw your other thread. I don't know if I would replace the daughterboard before I was certain the motherboard was in working order.
Check if your repair shop will do a thorough diagnosis before repair of anything.

Related

Broken Screen - Which part should i buy?

My GF broke the screen on her Droid Incredible, Verizon insurance wants $100 to replace it, so not sure it is worth it for this phone, and she has a few months left before her upgrade is ready. If i am going to try to fix it for her, can anyone with experience tell me what parts specifically I would need? The LCD seems fine, so i would think i can replace just the digitizer, which i can get on Amazon for $16
http://www.amazon.com/Incredible-Sc...ement-Adhesives/dp/B005TGX6X8/ref=pd_cp_cps_0
They also sell with front housing
http://www.amazon.com/Touch-Screen-Glass-Digitizer-Incredible/dp/B005L0XRRM/ref=pd_cp_cps_1
any tips which to buy or what to do etc?
Why would one/How does one know if they need to replace the LCD as well?
All touch aspects of phone working fine and seems like it's just the glass cracked.
Dillsnik said:
My GF broke the screen on her Droid Incredible, Verizon insurance wants $100 to replace it, so not sure it is worth it for this phone, and she has a few months left before her upgrade is ready. If i am going to try to fix it for her, can anyone with experience tell me what parts specifically I would need? The LCD seems fine, so i would think i can replace just the digitizer, which i can get on Amazon for $16
http://www.amazon.com/Incredible-Sc...ement-Adhesives/dp/B005TGX6X8/ref=pd_cp_cps_0
They also sell with front housing
http://www.amazon.com/Touch-Screen-Glass-Digitizer-Incredible/dp/B005L0XRRM/ref=pd_cp_cps_1
any tips which to buy or what to do etc?
Why would one/How does one know if they need to replace the LCD as well?
All touch aspects of phone working fine and seems like it's just the glass cracked.
Click to expand...
Click to collapse
I am no expert, but it would seem that if anything under the glass was broken, you would need to replace the lcd (that is, if you could see the lcd "leaking" or being distorted)
Sent from my ARCHOS 80G9 using Tapatalk 2
Nothing under the screen seems broken.
Anyone done this?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Dillsnik said:
Nothing under the screen seems broken.
Anyone done this?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Click to expand...
Click to collapse
Unfortunately I have had the pleasure of replacing my digitizer twice. You definitely wanna buy it WITH the frame or housing. The adhesive is like industrial strength and you will end up breaking the original anyways when trying to remove the digitizer from it. I have to warn you that doing this repair yourself will void your warranty. Make sure the digitizer you get comes with the tools required to get the phone apart. You can get this as a package on eBay fairly cheap too. There are about 3-4 circuit strips that will have to be removed from their clips, don't be intimidated by them, but be gentle. Your first time is gonna take you a while, just be patient. If you need to do it a second time, its gonna be a breeze. PM me if you have any concerns during your repair.
yea get a digitizer also,
I had the same thing happen to me, it was a pain but there are a few videos on youtube
that should help you through it, though it doesn't sound like its that bad
Definitely go with the digitizer and housing replacement together. Bottom line, it will make your life so much less of a headache while replacing it.
Sent from my ADR6300 using XDA
I just replaced mine this weekend. I attached some before, during, and after pictures...
These were the guides that I followed:
Part 1: http://www.youtube.com/watch?v=TfpPS7oO4Q8
Part 2: http://www.youtube.com/watch?v=GJMAmKpk20c
Personally, I went with just the glass/digitizer (your first link) and it went fine. The glass is difficult to get out of the housing, but it's not that bad. It probably took me 20 minutes to get the old glass out, maybe 5 minutes of cleaning goo from the old adhesive, and probably another 5 minutes to put the new glass back on.
Some Tips:
The pry tool that comes with it is very cheap. I would suggest using it sparingly until you get to the LCD panel extraction and glass removal. You want it to be as in good of condition as can be when you get to those later steps.
Use a blow-drier to heat up the adhesive, and get it to the point where you almost cant touch it. I used some yellow kitchen gloves so I could get it a little hotter and still be able to hold it. I used a combination of my hands and the pry tool and worked mostly along the sides and top first, then separated the bottom last.
The guy in the youtube videos uses glue, but you shouldn't need that. It comes with pre-cut adhesive strips, which work great. One word of caution though... The sheet that they come on is scored for you, but I suggest using an x-acto to cut them out. This is especially important for the thin rectangle that goes around the outside of the glass. You really don't want to pull on that... you don't want it to get stretched or twisted. Summary: the strips work great, just be careful extracting them from the sheet they come on, and placing them on the phone.
Don't forget to get the red earpiece grill off of the old glass before throwing it away. You'll need to super glue that back onto the housing, but it's really easy to see where it goes. This should be the only thing you need glue for.
When removing the glass, cleaning up gunk from the old adhesive, and applying new adhesive, be careful of the electronics at the bottom for your capacitive buttons... you definitely don't want to harm or obstruct those.
This should probably go without saying, but make sure not to touch the inside of the new glass, or the LCD panel. You don't want fingerprints or dust inside the phone. Even if you don't touch it, I would still give it a shot of compressed air right before putting it in, just to make sure there's no dust.
I would say that it's probably worth the extra $10-12 bucks to get it with the housing already included, but it's definitely not necessary if you want to save a little money. As I said above, it only took me about a half hour to get the old glass out and the new glass in, and from what it sounds like, there is still some effort involved even if you get it with the housing (moving the circuitry from the old one). I wouldn't worry about breaking the frame... it's pretty strong. If you break it, you're doing it wrong. Although, if your frame has some scrapes and other assorted road rash on it like mine does (see first picture), then maybe you might want a new one anyway. Another consideration... the reviews on Amazon for the one without the housing are much better, but that could just be because of people who don't know what they're doing... who knows.
If you have any questions, I'd certainly be willing to help... PM me if you want. And if I'm going to be around when you go to actually do the replacement, I can give you my gchat address in case you have any questions during the process.

[Resolved] Digitizer Dead-zone...?

So I got this nice (albeit beat-up, but 100% functional) G2 from a friend, and for about 3 weeks it had no problems. I rooted it, put CyanogenMod 7.2 on it, worked fine.
About 3 days ago, it started behaving really weird while I was using it. Interfaces not responding, at times opening things when I didn't have my finger on the screen, usual possessed phone behavior) I did some investigating with the Developer Tools' Pointer Location display, and there's this massive dead-zone on my digitizer! The dead-zone (while holding the phone in landscape) goes from X=255.1 to X=401.1, and covers all the Y-values in that range. if I move my finger slowly enough through the deadzone from one fo the sides of it, it will register as being directly in the center of it. Other times it will show a very light touch on the right side of the zone, activating interface elements and the like.
What happened? Do I have to replace the digitizer? I don't have a warranty on it, seeing as I got it second-hand. Possible fixes, if it's not a serious hardware issue?
I don't have money to spare, so buying things to fix it might take a lot of saving.
EDIT: Got it in the mail finally, replaced it in 45 minutes. I had to use the dorm's heated-air hand-dryer to get it off, and I kinda messed up the glue a bit, but it's working just fine.
If you have to replace the digitizer, I would not worry. I just got done replacing the lcd on my G2, and it works. I bought the lcd (in your case it would be a digitizer) off ebay and my purchased also included the screw drivers and plastic tip thingy to open the phone. For the digitizer you might need to also get double sided tape.
There is a youtube video showing how to take a part and put back the phone. I think the video was like 30min, but when I did it, the time was 1.5hrs totally.
good luck if you go that route.
Previous post is spot on, for most people I would assume this won't be a hard task, I have opened and repaired dozens of g2s (and many other phones) and although sliders tend to be the most complicated its really straight forward
Find a YouTube video or other instructions online and look at it ahead of time to see if its something you feel comfortable with. Then if so, order the digitizer (90% this is the cause 10% the main flex) for around 15-20$ and all you need is a #0 Philips and a t5 torx and a hairdryer/heat gun
You won't need tape as there is more than enough sticky left after prying of the digitizer. Expect about that hour in half if your new to this, but can be done in less than 20 if you do it a lot Here is a link to info on your phone including repair guides
http://forum.xda-developers.com/showthread.php?p=43195539
Best of luck!
Sent from my Nexus 4 using Tapatalk 2
Aw. Was hoping this wouldn't be the solution.
That sucks. Just went and ordered one, it came with screwdrivers and the prying tool, but I don't have any double-sided tape. Let's hope it's still sticky. Well, it supposedly gets here on the 9th, so I'll read up on replacing from these links. Thanks for the support. Hope I don't break the thing. :/

Messed up screen replacement, is it repairable?

So I dropped my screen a few months back and the glass cracked. It still worked $100 percent and since the glass wasn't shattered it didn't prevent me from using it. It was only annoying me so i decided to order a new glass and replace the glass. During this replacement I completely ****ed the phone up.
From what I understand there are 3 separate pieces, the LCD, the touchscreen digitizer, and the glass itself. I was supposed to pull the glass apart from the digitizer but instead pulled both up leaving only the lcd behind. In the process I completely shattered both glass and digitizer and severed a ribbon cable.
I couldn't link to an imgur album and the images were too large to attach so i put them in a rar file. As you can see in the pictures my new glass is completely transparent and the old broken one has a tint to it, and an extra layer attached. That was how I came to the conclusion it was the digitizer. I have tried to see if I could just replace the digitizer but all the pictures I've seen don't show the cable that I severed. I have no idea what that cable does, only that it was connected to the tinted portion of the glass.
Important to note is that the phone works. I hear it power on and if i get a notification it plays the sound and vibrates no issue. I just can't SEE anything. Does this mean the LCD is broken too? Or will it only power up when it has the digitizer attached? Is this repairable, if so, how? if not, where did I go wrong?
At this moment I am not due for an upgrade til June, and I don't have more than $100 to spend on a replacement so if I can I'd like to fix this one to both save money and not have to downgrade to a lesser phone.
Brooklyn11218 said:
So I dropped my screen a few months back and the glass cracked. It still worked $100 percent and since the glass wasn't shattered it didn't prevent me from using it. It was only annoying me so i decided to order a new glass and replace the glass. During this replacement I completely ****ed the phone up.
From what I understand there are 3 separate pieces, the LCD, the touchscreen digitizer, and the glass itself. I was supposed to pull the glass apart from the digitizer but instead pulled both up leaving only the lcd behind. In the process I completely shattered both glass and digitizer and severed a ribbon cable.
I couldn't link to an imgur album and the images were too large to attach so i put them in a rar file. As you can see in the pictures my new glass is completely transparent and the old broken one has a tint to it, and an extra layer attached. That was how I came to the conclusion it was the digitizer. I have tried to see if I could just replace the digitizer but all the pictures I've seen don't show the cable that I severed. I have no idea what that cable does, only that it was connected to the tinted portion of the glass.
Important to note is that the phone works. I hear it power on and if i get a notification it plays the sound and vibrates no issue. I just can't SEE anything. Does this mean the LCD is broken too? Or will it only power up when it has the digitizer attached? Is this repairable, if so, how? if not, where did I go wrong?
At this moment I am not due for an upgrade til June, and I don't have more than $100 to spend on a replacement so if I can I'd like to fix this one to both save money and not have to downgrade to a lesser phone.
Click to expand...
Click to collapse
You can buy a replacement screen with a digitizer attached but it will cost over $100 and the way your phone is now it may not be worth doing yourself. You can get a pro install for around $200. You may want to wait for your upgrade then.
avruma said:
You can buy a replacement screen with a digitizer attached but it will cost over $100 and the way your phone is now it may not be worth doing yourself. You can get a pro install for around $200. You may want to wait for your upgrade then.
Click to expand...
Click to collapse
Yeah I was hoping there was a cheap fix but I screwed myself. I ended up buying one off eBay that has a bad charging port for $100. I'm just going to swap the mobo and I should be good to go.
Sucks I had to spend the money, it was a gift from my brother for a birthday tattoo, butit's a learning experience. If I ever try to tackle a glass replacement again I know what NOT to do.

Screen broken:(

Hello
Where may I a replacing screen for my Le Max 2? It has just fallen on the floor and is broken even though the touch screen is still working
thanks
Hope this helps. Check the store feedback before buying.
http://www.aliexpress.com/wholesale...030452&SearchText=le+max+2+replacement+screen
Good to know it can be done and there are spare parts around.
Always thought it was fatal with these newer "design over everything" phones.
neo299 said:
Hope think is helps. Check the store feedback before buying.
http://www.aliexpress.com/wholesale...030452&SearchText=le+max+2+replacement+screen
Click to expand...
Click to collapse
Thx for your reply. Can you say which lcd screen is made by LeTV or is there an LCD screen which is made by LeTV? Thx
I don't know. Perhaps someone else on the forum has that information. I think they sell original screens but it's best you contact the sellers directly before ordering.
lcarrere said:
Hello
Where may I a replacing screen for my Le Max 2? It has just fallen on the floor and is broken even though the touch screen is still working
thanks
Click to expand...
Click to collapse
Try Le TV service centre ????
Hi!
Any update since October? I`m facing the same issue. I have googled a bit and found some complaints related to LCDs from Aliexpress claiming that they are no so bright and blurry, sometimes with white spots.
I have also find only a glass replacement https://www.aliexpress.com/item/5-7...lgo_pvid=aec8908f-0e28-4202-a650-ab20f3981970
of a glass with digitizer: http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl
But... also a lot people claims that the LCD is almost inseparable from glass... Do anyone have an experience with only glass replacement?
I found a local service that claims to be able to do that.. but I do not know whether to trust them not destroy the LCD. The said, that they do not have an experience with Le Max 2 but with other phones.
Thanks
xjack03 said:
Hi!
Any update since October? I`m facing the same issue. I have googled a bit and found some complaints related to LCDs from Aliexpress claiming that they are no so bright and blurry, sometimes with white spots.
I have also find only a glass replacement https://www.aliexpress.com/item/5-7...lgo_pvid=aec8908f-0e28-4202-a650-ab20f3981970
of a glass with digitizer: http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl
But... also a lot people claims that the LCD is almost inseparable from glass... Do anyone have an experience with only glass replacement?
I found a local service that claims to be able to do that.. but I do not know whether to trust them not destroy the LCD. The said, that they do not have an experience with Le Max 2 but with other phones.
Thanks
Click to expand...
Click to collapse
If you can get the fast delivery, then you can give it a go. Although it's a risky operation,it might be alright in the end. The service should have some experience if they say that for other brands/phones they have succeeded. It might be ok, but always keep in mind that something might go wrong. And it's not worth waiting 2 months for the glass and another 2 for the display.
Edit: you can google the process and you will see how it's done for other phones. They need to have special devices.
valy_cta said:
If you can get the fast delivery, then you can give it a go. Although it's a risky operation,it might be alright in the end. The service should have some experience if they say that for other brands/phones they have succeeded. It might be ok, but always keep in mind that something might go wrong. And it's not worth waiting 2 months for the glass and another 2 for the display.
Edit: you can google the process and you will see how it's done for other phones. They need to have special devices.
Click to expand...
Click to collapse
Thanks for such a fast reply. I already did https://www.youtube.com/watch?v=cRqSyZk1SOU It seems to be very tricky. I have relatively fast delivery about 2-3 weeks so I`ll give it a try with only a glass an digitizer http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl.
I`ll write a review after the whole process is done for future reference
Very difficult. They make it look easy on youtube. I attempted a glass only repair on a nexus 6. You have to have correct amount of heat, and the LCD is very fragile. Too much heat will damage the display, but you need enough heat to soften the loca glue to be able to separate the glass from the lcd.. I even had a scientific dry bath at my disposal to get the right temp.. Not worth a home repair attempt IMO.
Cost of the le max 2 is just the reason I bought this phone (vs a $600+ device) and put on tempered glass from Ali express for less than $2. Will you consider replacing your phone for $200?
My wife broke her tempered glass protector twice on the max 2. Easy fix, just replaced the tempered glass cover. I'm just saying I learned the hard way, on a more expensive Nexus 6. I wasn't aware of tempered glass protectors then. Even after destroying my lcd (by trying a glass-only repair) and ending up buying the lcd+glass assembly, I still didn't get the phone's frame tight with the display assembly to make it acceptable.
I tried to repair lcd once for another phone. It took me 1h just to disassemble the phone, and half an hour more to try to carefully separate lcd from digitizer. I failed and then there was no point spending another hour puting the phone back together and had to throw all those tiny parts to the garbage. Think about this before you try.
Home repairs of such kind are a no go. This is why I encourage him to go to the repair shop where they do that kind of repairs to the screen. They do have a special heated plate with temperature adjustment, a vacuum device that eliminates any bubbles between the lcd and glass, etc. Also do note that not all the repair shops are doing this. Most of them are collecting phones for the specialized shops and charge an extra fee.
In conclusion, this kind of repair is not for everybody, and it would be best done in a specialized repair shop. For reference, check the following video:
I know it's written in romanian and for an Allview, but I guess that most of the things are understandable to get the idea of how complicated the whole process is for any home attempt.
So, after a month in repair center I have my phone back. The screen is an original one with digitizer changed. Between digitizer and screen there are some bubbles, buttons are switched, like back is on a left instead of right and the bugged issue... They are very undeterministic and do not always work and sometimes they work without even touching so... Apps are switching and so on... I needed to disable them and use gestures instead.
The repair was about 40USD and digitizer 15 USD... It is hard to say whether it was worth it or exchange the complete screen.
Hello, please help me.
I live in MAYOTTE, I have to order a new screen. I do not find any vendor who delivers in my country.
Mayotte : https://goo.gl/maps/m62kwSK7yC92
raphimor said:
Hello, please help me.
I live in MAYOTTE, I have to order a new screen. I do not find any vendor who delivers in my country.
Mayotte : https://goo.gl/maps/m62kwSK7yC92
Click to expand...
Click to collapse
I'm the owner of the repair shop. I can take care of this phone, but I'm living on the other end of the world. Is there any career that can deliver something to you from Europe? I would like to make a video tutorial how to repair this phone, but mine one is working so there is no sense in repairing working phone...
CrazyPonkeyMen said:
I'm the owner of the repair shop. I can take care of this phone, but I'm living on the other end of the world. Is there any career that can deliver something to you from Europe? I would like to make a video tutorial how to repair this phone, but mine one is working so there is no sense in repairing working phone...
Click to expand...
Click to collapse
Yes of course. I can receive a parcel from europe thanks to CHRONOPOST
raphimor said:
Yes of course. I can receive a parcel from europe thanks to CHRONOPOST
Click to expand...
Click to collapse
I can personally recommend this vendor. https://www.aliexpress.com/item/For...32820735893.html?spm=a2g0s.9042311.0.0.xEXMor
Replacing the screen + digitiser on this model is pretty easy provided you have access to a hot air gun. Took me about 15 minutes and I'm in NO WAY a pro. For the price of a new screen I definitely wouldn't attempt a digitizer-only repair.
mikeysteele said:
I can personally recommend this vendor. https://www.aliexpress.com/item/For...32820735893.html?spm=a2g0s.9042311.0.0.xEXMor
Replacing the screen + digitiser on this model is pretty easy provided you have access to a hot air gun. Took me about 15 minutes and I'm in NO WAY a pro. For the price of a new screen I definitely wouldn't attempt a digitizer-only repair.
Click to expand...
Click to collapse
Wow.... That's cheap enough to order one and have it just in case.....
Thanks for the link
I have brought this one.
https://www.aliexpress.com/item/Gra...32799506808.html?spm=a2g0s.9042311.0.0.HsyGUO
And I can say, It's same as the original one in every detail(Even production date so close). Replacement is very easy with tool that came with screen.
BTW, You have to buy glue(B6000,E7000,T8000 or whatver) for fix it in place.

Dropped in water - was working well for few hours and then went black - please help!!

My son dropped his Oneplus 3 in water, took it out immediately and dried it. Phone was working well for few hours, then it had some screen rotation issue and when he tried to reboot it, it went black. When he got home, he dried it and then put it in Rice for four days. No luck.
Now when I charge the phone, it gets warm, so power is going in but the screen is black. I tried the Volume up and power button simultaneously, but to no avail. The screen remains totally black.
Not sure if I have to take to the repair guy at the mall to replace some parts or should I trying something else before doing that.
Please advise and provide guidance.:crying:
Thanks in advance.
Ric.
Its probably dead.
I mean, you can try the Mega Unbrick Guide but thats definetly not the case we have here.
Get it repaired as fast as possible over One Plus Support.
Shouldn't have used the phone and put into rice straight away. Probably the display connector accumulated rust and maybe service centre can fix it easily, MAYBE... In most cases some part of motherboard may be shorted, which would cost a lot to fix
Don't know if I can use unbrick guide... PC doesn't recognize the device!!
AcidNoteZ said:
Its probably dead.
I mean, you can try the Mega Unbrick Guide but thats definetly not the case we have here.
Get it repaired as fast as possible over One Plus Support.
Click to expand...
Click to collapse
Don't know if I can use unbrick guide... PC doesn't recognize the device!!
True...informed him of the process in case of next time...
anandbibek said:
Shouldn't have used the phone and put into rice straight away. Probably the display connector accumulated rust and maybe service centre can fix it easily, MAYBE... In most cases some part of motherboard may be shorted, which would cost a lot to fix
Click to expand...
Click to collapse
True...informed my son of the process in case this happens again.
Contacted Oneplus support, they mentioned that it may cost around $175 for the repair but they have to look at it first. I may be better off getting a new device.
rsheldon said:
True...informed my son of the process in case this happens again.
Contacted Oneplus support, they mentioned that it may cost around $175 for the repair but they have to look at it first. I may be better off getting a new device.
Click to expand...
Click to collapse
Wouldn't call it a bad price.. I mean for he S7 you already pay 400 bucks because you dropped your Phone once, try to open it up and see if the contact points are messed up, JerryRigEverything has a nice video.
Thanks Puddi_Puddin..viewed the video
Thanks Puddi_Puddin,
I took a look at the taking apart video on youtube. I was able to remove the screws with the appropriate screwdriver but to remove the screen, I think I may have to buy the JerryRigEverything Metal Pry Tool from Amazon. Any other alternatives?
I assume the water damage indicator would have changed color. What should I look out with regards to contact points? Anything else that I should look out for?
Thanks for the input and appreciate it.
Ric
If i did that to my own oneplus 3, my dad won't be getting me another phone that's for sure. And he will well pissed off, 400 dollars gone down the drain. He'll probably make me pay for it and if i wanted a phone, i will have to buy myself one. In your case, maybe not get him a phone so he will appreciate it more. You might as well get a phone with water resistance. I had to wait 5 years to get my own phone. My oneplus 3 was my first ever phone and i got it last year.
Well, for the replacement he is going to pay from his summer job.
For the replacement he is going to pay from his summer job.
I trying to salvage the OP3 so that I can use it as my backup or secondary phone.
Thanks
Ric
rsheldon said:
Thanks Puddi_Puddin,
I took a look at the taking apart video on youtube. I was able to remove the screws with the appropriate screwdriver but to remove the screen, I think I may have to buy the JerryRigEverything Metal Pry Tool from Amazon. Any other alternatives?
I assume the water damage indicator would have changed color. What should I look out with regards to contact points? Anything else that I should look out for?
Thanks for the input and appreciate it.
Ric
Click to expand...
Click to collapse
Well every thin piece of metal should do, as long as you are careful. You want to watch out for the screen tho. And switch to something like paper ASAP.

Categories

Resources