Related
Looking for developers!!
Would you please help me to apply this kernel patch ?
I wish that the zImage will be uploaded.
Features:
<Gingerbread>
add frequencies -> 1.4GHz, 1.2GHz, 600MHz
CF-Root & ClockWorkMod (thanks to Chainfire)
Voodoo Sound Version 9 (thanks to supercurio & richardtrip)
can mount ext4
BFQ
update.zip to flash this kernel(alterbridge86)
under voltage by under voltage app. you can download "Voltage Control" on the Market(thanks to xan)
Smartass & Interactive CPU Gov(thanks to -Mr. X-)
LCD is unvder voltage to 2.4v [default :3.3v]
cwm zip have a BLN library.(thanks to bartito)
BLN[BackLightNotification] (thanks to Michael Richter 'alias neldar' and akent)
BLN need to replace a library for lights.
new cwm kernel zip have a BLN library.(thanks to bartito)
this cwm zip is installer for only the library.
ttp://koxudaxi.sakura.ne.jp/android/cwmzip/bln_lib_installer.zip
and you should use BLN Control app which you can get in android market.
What is BackLightNotification?
The BackLightNotification mod converts the touchkey backlights into a notification led.
Click to expand...
Click to collapse
the original thread: http://forum.xda-developers.com/showthread.php?t=813389
<Froyo>
add frequencies -> 1.4GHz, 1.2GHz, 600MHz
Voodoo Sound Version 8 (thanks to supercurio & richardtrip)
update ext4 (thanks to richardtrip)
under voltage -> RAM(1.8v to 1.6v) and LCD(3.3v to 2.4v)
fix LED Flash for flash light apps
ClockWorkMod (thank to richardtrip and Paul Obrien)
enable usb mass storage(int-sd&ext-sd) in recovery mode
convert to ext4 over auto
change compiler options for Cortex-A8
Kernel HZ is 400, User HZ is 200
Tiny_RCU & BFQ (thanks to richardtrip)
under voltage app (thanks to xan)
tun support as kernel module
Increase Read Cache for all block device(thanks to brainmaster and alterbridge86)
Kernel:
<Gingerbread>
heimdall:zImage_euro_3_0_7
cwm:zImage_eur_3_0_7_cwm.zip
There is New Kernel!!
ATTENTION!!
NEED A LOT OF TEST
heimdall:zImage_euro_3_0_8NEW!!
cwm:zImage_eur_3_0_8_cwm.zipNEW!!
add:
support docomo boot screen (may support other asia rom)
show Kernel version name on "About device"(settings app -> About device)
update linux kernel version to 2.6.35.13(stock:2.6.35.7 thank to netarchy . i got the patches from his github for nexus-s )
add simple IO schedule and set as default
adjust LCD voltage 2.4v->2.6v for stability(default is 3.3v).
support 10 point multitouch
use TinyRCU
HZ=400,USER HZ=200
automated per tty task groups(thanks to Mike Galbraith https://lkml.org/lkml/2010/10/19/123)
Click to expand...
Click to collapse
<Froyo>
EURO:heimdall:zImage_euro_2_9_4mirror
HKTW:heimdall:zImage_hktw_2_9_3mirror if you get a high temperature error when using euro kernel. you should flash this kernel.
convert to ext4:
<Only Gingerbread>
i recommend chainfire tools to convert to ext4.
http://forum.xda-developers.com/showpost.php?p=12651371&postcount=7
my UV setting
frequency(MHz),voltage(mV)
1400 , -25
1200, -50
1000,-50
800,-50
600,-50
400,-50
200,-75
100,-75
app:
<Only Froyo>
VoltageControl-gt-600.apk mirror this app can decrease voltage in OC_kernel(add 600MHz& 1.4GHz)
CHANGE LOG:
8th Jun
eur_3_0_7 fix LED brightness on BLN,LCD is unvder voltage to 2.4v [default :3.3v],use user max frequency settings,fix few bug on oc/uv. (thanks to techomancer),cwm zip have a BLN library.(thanks to bartito)
7th Jun
eur_3_0_6 update BLN as a common driver,support blink mode by apps(only BLN pro) and sysfs ,fix CPU control method (thanks to Technomancer)
5th Jun
eur_3_0_5 add BLN(BacklightNotification) (thanks to Michael Richter 'alias neldar' and akent)
3th Jun
eur_3_0_4 add Voodoo Sound version 9 (thanks to supercurio & richardtrip),fix little typo
30th May
eur_3_0_3 support UV as sysfs and apps
29th May
eur_3_0_2 add 600MHz,BFQ
28th May
eur_3_0_1 add smartass-interactive gov(thanks -Mr. X-)
eur_3_0_0 baed gingerbread soucecode with 1.4&1.2GHz OC
2th May
eur_2_9_4 updated Voodoo Sound v8,LCD(2.6v to 2.4v) UV,Increase Read Cache for all block device(thanks to brainmaster and alterbridge86)
23th March
eur_2_9_3 updated Voodoo Sound v6(thanks to supercurio) and ext4(thanks to richardtrip),RAM(1.8v to 1.6v) and LCD(3.3v to 2.6v) UV,fixed LED Flash for flash light apps
25th February
region_2_8_9=Voodoo Sound(thanks to richardtrip),fixed cwm,enable usb mass storage(int-sd&ext-sd) in recovery mode.
region_2_8_5=add 600MHz,decrease internal voltage by "voltage control app"
region_2_6_1=region_2_6 + fix battery temperature.
17th February
region_2_6 = with CWM,work camera and all sensors include battery temperature.we don't need to replace sensors.default.so
11th February
region_1_5= source of update1 (without CWM).can work camera and sensors on newer roms
8th February
region_2 = with CWM :convert to ext4 over auto.we can't use rfs and ext2.
region_1_2= see update notice.
6th February
region_1 = 1.2GHz & 1.4GHz OCkernel
if you use previous version sensors.default.so with later version rom then you may replace new sensors.default.so to work sensor .
it is new sensor.default.so
http://koxudaxi.sakura.ne.jp/android/sensors.default.so
Code:
adb remount
adb push sensor.default.so /system/lib/hw
adb reboot
Thanks:
thanks to richardtrip
[Kernel] [EURO] [1.2ghz OC/UV] RFS + EXT4 V6 27/01(give me 1.2GHzUV patch)
https://github.com/richardtrip/galaxytab_kernel (The oc kernel need 'use 1.2Ghz 'patch)
thanks to Paul Obrien
i got initramfs on richardtrip's github.thanks richardtrip and Paul Obrien.
[APP+SOURCES!] (09Jan) Voltage Control - control OC/UV for OC kernels (for UV)
thanks to Bauxite
[Kernel] [Sprint/VZW] [1.2 OC/OV] Bauxite Kernel - 1.2 ghz - 1/22/11 - v1.2 (give me hints)
thanks to supercurio
https://github.com/project-voodoo/linux_sch-i800 (thank to supercurio for Voodoo Sound v6 patch)
thanks to xan
thanks to ytt3r
https://github.com/ytt3r
thanks to netarchy
https://github.com/netarchy
thanks to akent
https://github.com/akent/
thanks to neldar
https://github.com/neldar/
Why?:
I have a Galaxy Tab which provided by NTT Docomo.
NTT Docomo is a cell phone carrier in Japan.
I don't have a euro galaxy tab and others. I have a only japan model.
I have build 1.4GHz OC kernel (include 1.2GHz) for docomo's Galaxy tab .
The OC kernel is faster than default kernel. and it is very stable.
Quadrant score is 3018 (with OCLF).Linpack socre is 19.58.
I hope a lot of people want to use it.
The Quadrant Score is the best record.
usual benchmarks are not very good.
but,anyone can feel quick response,smooth scrolling.
Do you want to set custom voltage values while boot process?
ok, you install busybox to /system/bin/busybox
Boot script uses run-parts command on busybox.
For Developers
Where are patches and .config and initramfs?
main tree:http://koxudaxi.sakura.ne.jp/android
patches:http://koxudaxi.sakura.ne.jp/android/patch/
patch list:http://koxudaxi.sakura.ne.jp/android/patch_list/
initramfs:http://koxudaxi.sakura.ne.jp/android/initramfs/
zImage:http://koxudaxi.sakura.ne.jp/android/zImage/
cwmzip:http://koxudaxi.sakura.ne.jp/android/cwmzip/
config:http://koxudaxi.sakura.ne.jp/android/config/
WTF, you are explode quadrant !!!
ok,could you post the OC kernel?
I could test it on an Euro GT...
koxudaxi said:
Looking for developers!!
Would you please help me to apply this kernel patch ?
I wish that the zImage will be uploaded.
The Kernel patch has 1.2GHz and 1.4GHz clocks tables.
I made The Kernel patch from a few kernel patches(see list).
list:
[Kernel] [EURO] [1.2ghz OC/UV] RFS + EXT4 V6 27/01(give me 1.2GHzUV patch)
ttps://github.com/richardtrip/galaxytab_kernel (The oc kernel need 'use 1.2Ghz 'patch)
[APP+SOURCES!] (09Jan) Voltage Control - control OC/UV for OC kernels (for UV)
[Kernel] [Sprint/VZW] [1.2 OC/OV] Bauxite Kernel - 1.2 ghz - 1/22/11 - v1.2 (give me hints)
Thank wizards!!
Why?
I have a Galaxy Tab which provided by NTT Docomo.
NTT Docomo is a cell phone carrier in Japan.
I don't have a euro galaxy tab and others. I have a only japan model.
I have build 1.4GHz OC kernel (include 1.2GHz) for docomo's Galaxy tab .
The OC kernel is faster than default kernel. and it is very stable.
Quadrant score is 3018 (with OCLF).Linpack socre is 19.58.
twitter account: koxudaxi_en
I hope a lot of people want to use it.
My kernel is include Famous Patches .but the OC_patch does not have other patches.
HZ=300,USER_HZ=150
Build_for_Cortex-a8
Tiny_RCU
BFQ_disk_scheduler
Update_touchscreen
source of EURO OC KERNEL.
The Quadrant Score is the best record.
usual benchmarks are not very good.
but,anyone can feel quick response,smooth scrolling.
Click to expand...
Click to collapse
i dont know what u want to be done, but i think that u want a developer to build a kernel with these patches to get a european zImage?
ill try and report!
thank triplex76
i upload zImage.
i trierd ...euro kernel don't run on my Galaxy Tab.
i guess euro kernel doesn't match a roms.
I haven't gone deep looking into the kernel clock table cause thanks to richardtrip he did an awesome job patching an euro one for 1200 mhz and it works without issues on the older roms (JK familiy firmware) that's what I'm using cause till now I've not found the need to update.everything is absolutely smooth and working as it should and I personally think there is no need to fix something that's not broken...till now I saw that the most of custom roms are somewhat bugged...even the stock newer firmware got some issues ...so I will stay with my modded JK5 until something fully tested will come out.
but i got no problem testing newer stuff I can always go back to my own and that's what I did/do if I don't like it.
thanks Landroid
oh,i think....i'm grateful to many hackers.
And i want to repayment of a kindness.
i will be expecting your work !!
is the zImage u posted for EURO tab?
Thanks for the patch, I was waiting for someone to take a deeper look into the frequency tables as I don't have much skill doing it.
I'll work on one for CDMA at the very least.
i usually use this zImage on japan model.
and many geeks use this zImage in japan.
i don't know that run on euro tab.
koxudaxi said:
i usually use this zImage on japan model.
and many geeks use this zImage in japan.
i don't know that run on euro tab.
Click to expand...
Click to collapse
i have try it on my asia tab , but not working .. orz...
@koxudaxi
works fine on euro Galaxy Tab!
GOOD WORK MAN!
oh, Bauxite.
you look like you good.
you gave me a lot of hint.
you said that about voltage control is very important.
it is very truth. but low voltage can run high clocks.
Important fact is that we have to up 'dvs_arm_voltage_set_1DOT2GHZ tables' to very high voltage.
Landroid said:
@koxudaxi
works fine on euro Galaxy Tab!
GOOD WORK MAN!
Click to expand...
Click to collapse
@Landroid
did you flash this w/ heimdall or odin? What kernel were you running before you flashed this? I have the US T-mobile tab w/ Modaco Kernel and overcome rom. I might give this a try, but I want to see what you are running first before I flash this kernel.
jkurl said:
@Landroid
did you flash this w/ heimdall or odin? What kernel were you running before you flashed this? I have the US T-mobile tab w/ Modaco Kernel and overcome rom. I might give this a try, but I want to see what you are running first before I flash this kernel.
Click to expand...
Click to collapse
u propably cant use this with overcome cause i dont think that this kernel supports EXT4...
i flashed with heimdall from JK5 (still the best rom, in my opinion )
>@koxudaxi
>works fine on euro Galaxy Tab!
>GOOD WORK MAN!
Good job Landroid!!and thank you!!
i will edit the post message.
thanks rayldf!!
oh,sorry i don't understand that can't run on asia tab.
but, roms versions is very importance...
you will run when change to other roms.
koxudaxi said:
>@koxudaxi
>works fine on euro Galaxy Tab!
>GOOD WORK MAN!
Good job Landroid!!and thank you!!
i will edit the post message.
thanks rayldf!!
oh,sorry i don't understand that can't run on asia tab.
but, roms versions is very importance...
you will run when change to other roms.
Click to expand...
Click to collapse
@koxudaxi
Do you know if this supports EXT4? Great job I am hoping to take advantage of you work. I used Bauxite kernel when I had the sprint tab and it worked great for me.
@Landroid
this kernel is include ext3,ext4.
but,I guess I'll have to edit boot init script?!when i want to mount ext3,ext4 Partitions.
sorry, I'm a android beginner.
i bought galaxy tab Last month.
sweet I will be putting this on when it fully confirmed it will work on a EXT4.
@jkurl
i have finished building a zimage.
it can mount ext4 on boot init.rc script.
Please check!!
What is T3?
T3 (Tytung – 3dak) Kernel, it's based on Tytung_R12.4 kernel source repository,
GIT repository Source url:
https://gitorious.org/~3dak/linux-on-wince-htc/t3-linux_on_wince_htc
it has two branches: master branch for CM/AOSP/MIUI build, it will keep existing hastarin r8.6 gpu driver, sense branch for HTC sense 3.x build.
All credits to Tytung, Hastarin, Makinus , every patch providers and contributors.
The target of this repository is tweaking/adding features/optimizing Linux Kernel for sense build(SD/MAG/Nand/cLK) and try to getting better speed and performance on sense build. I will optimize the kernel on schedulers,CPU, Memory Allocator, IO shceduler , cpu frequence and so on…
also will add a sense branch on current 3dak_Rx.x SD/MAG kernel for those bulid wanna boot SD ROM from both winmo and magldr
Worked new features based on tytung r12.4
-BFQ IO Scheduler as default(Faster than CFQ)
-SLQB Memory allocator as default (Faster than SLAB)
-LAZM to compress image to get smaller zImage , better than GZIP.
-migrated HTC official 2.6.35 bravo GPU driver for sense branch . Finished and worked fine and better perfermance on sense build per boxmax experiments.
...
Next plan:
GPU driver tweak
try better and suitable CPU scheduler. BFS? TinyRCU?...
Changes log:
Code:
T3 R3 Changes:
-GPU driver: fixed color banding issue . (Credits to marc1706)
-added CPUfreq governor:smartassV2, added TinyRCU
-Sense: revert old camera driver.
-disable 2WCRec to avoid speaker sizz issue.
T3 R2 Changes:
- Merged tytung r13 commits:Added Alsa sound driver.(Credits to Cotulla & Tytung ),HTC auto white balance calibration driver.
-Driver/Cpufreq: Add CPUFreq governor 'smartassV2'
-enbale 2WREC
-Sense branch: Camera driver updated to HTC official Bravo 2.6.35 camera driver.
T3 R1 : Initial release.
-It based on Tytung R12.4.(Credits to tytung ) with some new features.
-Added VR IO Scheduler.
-Added BFQ IO Scheduler as default.
-Added SLQB Memory Allocator asd default
-LZMA to compress image to get smaller zImage file.
-Sense branch:Use HTC official Bravo 2.6.35 GPU driver to replace hastrarin r8.6 GPU driver
P.S. Use this kernel at your risk.
here is latest R3 verison:
P.S. kernl pack is just kernel files for build cooker. it is not a CWM recovery zip.I'm lazy to create recovery zip. initrd.gz or boot.img in kernel pack is my initrd for miui build with data.img supported. maybe it is not suitable for your build. if you are ROM cooker, you know how to use it.
T3 R3 Master: cLK MAG
T3 R3 Sense: cLK MAG
[old versions]
T3 R2: cLK Mag
T3 R2 Sense: cLK Mag
T3 R1: cLK Mag
T3 R1 Sense: cLK Mag Only for sense build or no camera preview. and maybe your build needs this : correct lib/hw&egl files for sense buld.
Support
Good job.
My test results: camera basically no lag, there are few. Very great.
Thanks man for your continued efforts
Did you solve problem with graphical glitches in sense 3.0/3.5 roms?
This is really nice
What about 3G/Wifi switch ? Is it kernel related ?
Yes, but it seems to be EU user related
Hi,
If I understand correctly, I can test this with miui rom? Currently I am using the latest build of miui...
Sent from my HTC HD2 using XDA App
Woooo.. Great job will test on my SD Version .. feedback later
I hope this isn't a back port kernel. I don't want unneeded time to be wasted. Check out my post on the 2.6.35 kernel thread for the camera fix.
Good Thread!
Awesome Idea !!!
Great Work camecorder ... No Lag or Less ... i tested
also for 3dak T3 ... attach hw+egl+fix glitches + set in build.prop (debug.sf.hw=0)
3dak !
Can do two v Same (r3.7& r2.7 ) for power bt
Downloaded the mag sense version tried to flash using cwm and got installation aborted. im running danstas runnymede. Any ideas
Graham
boxmax said:
Great Work camecorder ... No Lag or Less ... i tested
also for 3dak T3 ... attach hw+egl+fix glitches + set in build.prop (debug.sf.hw=0)
Click to expand...
Click to collapse
What does this enable us the record at? 800 x480?
strachg said:
Downloaded the mag sense version tried to flash using cwm and got installation aborted. im running danstas runnymede. Any ideas
Graham
Click to expand...
Click to collapse
Same problem for me.
Should be install this update from Magloader ?
strachg said:
Downloaded the mag sense version tried to flash using cwm and got installation aborted. im running danstas runnymede. Any ideas
Graham
Click to expand...
Click to collapse
The BLION Corp. said:
Same problem for me.
Should be install this update from Magloader ?
Click to expand...
Click to collapse
+1
CLK version.
The BLION Corp. said:
Same problem for me.
Should be install this update from Magloader ?
Click to expand...
Click to collapse
here you go a CWM flashable magldr CM/AOSP/MIUI version
MAGDLR Sense version is also not flashable in CWM. :/
How to change the zipfile?
edit: ha, got it CWM flashable myself
here you go MAGDLR Sense version....
CWM flashable version of the EGL libs from above for your pleasure...
Dirty Unicorns 6.0.1 is probably the best marshmallow rom for amami so far , although it has some problems: camera app cannot take pictures at 20.7mp, and exfat-formated sdcard is not supported.
So I made a kernel to fix these problems. You can flash with twrp or flashfire.
Kernel_Amami_AOSP_6_20160709.zip contains aosp kernel built with exfat-nofuse and some other features, as well as other executables or libraries needed to identify and mount exfat(vold , blkid etc.) This may work with other aosp 6.0.1 based roms, but I never tried by myself.
2016.06.18 : I ported some features from other kernels like M5 kernel. Features included:
1. Various cpufreq governors, hotplug drivers and i/o schedulers
2. KCAL color control by @savoca
3. Faux Sound Control V3
4. CPU/GPU OC & UV
5. Vibrator intensity control
6. Ultra-ksm
7. Kexec-hardboot
8. Dynamic Fsync 1.2
9. Mac80211 injection patch and HID patch for keyboard support
10. Sysfs interface to Enable / Disable CRC on the data blocks
11. Exfat and Paragon NTFS(UFSD)
12. Zram
13. Merge upstream patches up to 3.10.102
MtkCamera.zip contains camera app from Mediatek devices with lollipop. It can take 20.7mp photos(3936 x 5248) and has some useful features like visual effects and qrcode scanner.
Modified kernel source : https://github.com/KuronekoDungeon/android_kernel_sony_msm
Download : https://drive.google.com/folderview?id=0B-DoK6BdpB2fZEZ5eG5NcnhYNFU&usp=sharing
If you're interested, Myself5 is willing to release M5 for Amami, but needs a maintainer, since he doesn't have a Z1c anymore. Maybe you can work with him on M5 for AOSP...
levone1 said:
If you're interested, Myself5 is willing to release M5 for Amami, but needs a maintainer, since he doesn't have a Z1c anymore. Maybe you can work with him on M5 for AOSP...
Click to expand...
Click to collapse
Is he working on a 3.10.9x kernel ?
maz-1 said:
Is he working on a 3.10.9x kernel ?
Click to expand...
Click to collapse
This is from main thread latest version...
levone1 said:
This is from main thread latest version...
Click to expand...
Click to collapse
cool, I guess I will be a tester then.
maz-1 said:
cool, I guess I will be a tester then.
Click to expand...
Click to collapse
He did say that testers won't really help. Without a device of his own, he'll need a maintainer.
levone1 said:
He did say that testers won't really help. Without a device of his own, he'll need a maintainer.
Click to expand...
Click to collapse
Well, I mean I will build, test and submit fixes if possible. But I'm afraid I don't have the time and knowledge to take over all the maintenance. Any other volunteers?
maz-1 said:
Well, I mean I will build, test and submit fixes if possible. But I'm afraid I don't have the time and knowledge to take over all the maintenance. Any other volunteers?
Click to expand...
Click to collapse
maybe we can jointly maintain ?
CLINTZ9 said:
maybe we can jointly maintain ?
Click to expand...
Click to collapse
Sounds good.
maz-1 said:
Sounds good.
Click to expand...
Click to collapse
cool !
CLINTZ9 said:
cool !
Click to expand...
Click to collapse
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
maz-1 said:
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
Click to expand...
Click to collapse
Hi, I install this, work well, but camera still laggy . What do you think, how else you can improve the image processing? The picture was much too sharp ... but it's better than before.
And...you can also add in your kernel any functions like as KryptonianKernel or AdvancedKernel
John.D.. said:
Hi, I install this, work well, but camera still laggy . What do you think, how else you can improve the image processing? The picture was much too sharp ... but it's better than before.
And...you can also add in your kernel any functions like as KryptonianKernel or AdvancedKernel
Click to expand...
Click to collapse
Laggy camera is a driver issue, just wait until sony updates software binaries for amami.
Hmm, why you delete MTKCamera? You have another app for taking photo in 21mp?)
MTKCamera cannot use frontcam. I think @SpiritCroc will try to add 20.7mp option to SnapdragonCamera, so wait for a new release.
maz-1 said:
MTKCamera cannot use frontcam. I think @SpiritCroc will try to add 20.7mp option to SnapdragonCamera, so wait for a new release.
Click to expand...
Click to collapse
I already added it, will probably be in next weekly
maz-1 said:
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
Click to expand...
Click to collapse
check your whatsapp inbox
What's 'jhead exif fix' file in your Gdrive link?
levone1 said:
What's 'jhead exif fix' file in your Gdrive link?
Click to expand...
Click to collapse
libjhead with this patch :
https://gist.github.com/updateing/2b58ebd4a8c75780443f28f514e9bb39
Photos token by Android N may contain wrong exif infomation and cause app crash on marshmallow/lollipop.
need help - CPU GOVs and frequencies
Hi,
first of all thanks for the kernel! I'm just migrated from RR Lollipop to MM DU ROM (today to the build of 17. June). I have strange issues with the kernel.
I can not change the CPU govs. More critical: The minimum CPU frequency is shown to be 1.8 GHz. Whatever I try, I cannot get the values gov/freq to stick.
Always when I reopen an tuning app, the settings are reverted.
Root seems to work fine. Also tried to disable SE-linux via terminal ("setenforce 0"). The same.
(Combinations I tried: kernel audiutor, performance control, system tuner... also on DU (3. june) + kernel (5. june)
Can somebody help me out?
Who can permanently adjust the CPU settings on DU with/without this kernel?
Thanks in advance!
Hi all, now I'm going to present my own custom kernel for Oneplus One!
Feature list:
Compiled with Linaro GCC 6.2 ARM toolchain
kexec patch (Multirom support)
UV support
Working button longpress on wired headset
KCAL display control by savoca
Kernel Samepage Merging (KSM)
Simple Thermal driver by franciscofranco
Qualcomm's MPDecision hotplugging driver is replaced by Nvidia's CPUQuiet for better UX (backported 3.10 version)
CAF's CPU boost driver is replaced by sultanxda's cpu_input_boost driver
Tuned Interactive governor with franciscofranco patches (better freq scaling)
Custom camera blobs from OOS 3.x on any (almost) ROM!
Optimized Low Memory Killer (LMK)
Charging current control by boeffla
QoS patches from Linux 3.10 kernel
Optimized FSync algorithm and ability to disable it <-- Use with caution!
Many many other little adjustments (Over 660 changes have been made to the kernel source!)
Anykernel installation
Very smooth UI
Almost full KA support (WiP)
I've forgotten much, you can check my source on Github
Installation:
Download latest kernel and camera blobs zips (you have to flash blobs only once or after ROM reflash)
Reboot recovery
Flash them
Reboot
Contact me:
If you found any bugs/something doesn't work or you have feature request, contact me in Telegram group
Downloads:
Bacon (OOS 3.x blobs): link
Credits:
franciscofranco, flar2, eng.stk, arter97, sultanxda, lord boeffla and many other people: for contributing to Android kernel development
jcadduono for lazyflasher
@KalilDev for making template for this post because I'm lazy ass very busy
XDA:DevDB Information
ab123321 kernel, Kernel for the OnePlus One
Contributors
ab123321
Source Code: [url]https://github.com/ab123321/android_kernel_oneplus_one/[/URL]
FAQ:
Q: What should I flash first: blobs or kernel?
A: It doesn't matter
Q: Which ROMs are supported?
A: Nougat ROMs with CM kernel are supported. It's most of ROMs for Oneplus One (LOS, AICP, RR etc).
Q: I have issues!
A: Flash ROM => flash SuperSU/Magisk (optionally) => flash needed kernel and blobs
Q: I sill have issues!
A: Take logcat and kmsg and send me in PM (Telegram preferred)
Q: I flashed my favorite Boeffla kernel and camera stopped working! Help!
A: If you want properly working device with custom blobs, flash this kernel, not any other (except it is mentioned by kernel author).
Changelog:
4_2 (09.03.2017) - Simple GPU Algorithm is replaced by Adreno idler, switched from Anykernel to lazyflasher, performance improved much (battery may drain). Now you can flash kernel on ROM with sultanxda camera HAL
3 (17.02.2017) - sultanxda version of blobs is dropped, added lionheart governor, fully reworked default performance profile (better performance and battery life), default read ahead size is 512KB by default
2_1 (06.02.2017) - Little adjustments to sultanxda version (both kernel and blobs zips updated), no need to update if you're currently on beta2. Alpha2_1 version of OOS blobs
beta2 (01.02.2017) - SELinux is set to Permissive mode by default to fix most of camera problems; updates from LineageOS; some charging fixes
beta1 (26.01.2017) - Initial Release
Finally the magic begins.
The magic is out!
Good job
Interesting. So you're saying you can flash this kernel on any ROM and have SultanXDA's camera HAL?
Claudiosvs said:
Interesting. So you're saying you can flash this kernel on any ROM and have SultanXDA's camera HAL?
Click to expand...
Click to collapse
You are right
Do I need to flash sultan blobs separately on lineageos??
Thanks for this mileage.
Installed both zips over the latest resurrection remix 7.1.1 and unfortunately the camera keeps crashing when trying to take photos and videos. Tried with the main and secondary camera and also with flash on and off.
Also saw that 1080p and 2.5k video recording of the secondary camera is not present, so i guess is still a WIP
Logcat after the issues: https://drive.google.com/file/d/0B25zhqsy3xaYSHNQOGd1T1dkaEE/view?usp=drivesdk
Kernek log: https://drive.google.com/file/d/0B25zhqsy3xaYZjFhbEhnQ01CdFU/view?usp=drivesdk
Does this kernel have uv support?
mustang_ssc said:
Thanks for this mileage.
Installed both zips over the latest resurrection remix 7.1.1 and unfortunately the camera keeps crashing when trying to take photos and videos. Tried with the main and secondary camera and also with flash on and off.
Also saw that 1080p and 2.5k video recording of the secondary camera is not present, so i guess is still a WIP
Logcat after the issues: https://drive.google.com/file/d/0B25zhqsy3xaYSHNQOGd1T1dkaEE/view?usp=drivesdk
Kernek log: https://drive.google.com/file/d/0B25zhqsy3xaYZjFhbEhnQ01CdFU/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks! Until I fix this, try to use ut with SELinux Permssive. 1080p and 2.5k formats support is on ROM side
Anyone with official LineageOS? Results? Haha
Gawd said:
Anyone with official LineageOS? Results? Haha
Click to expand...
Click to collapse
It works fine.
Fatsodonkey said:
Does this kernel have uv support?
Click to expand...
Click to collapse
No.
Btw, turn on permissive so that it can save pictures/not crash.
f41lbl0g said:
It works fine.
Click to expand...
Click to collapse
Including the camera? Like literally sultanxda's?
Gawd said:
Including the camera? Like literally sultanxda's?
Click to expand...
Click to collapse
Yes, its literally magical but it works. Try it for yourself.
Awesome kernel, great battery and slick performance.
So this is it. A prophetic hero who would arise to port Sultan's kernel works to Nougat.
Guess I'm keeping my OPO for another year.
flashed the kernel
also flashed the sultan camera libs, no camera crash experienced, so far great, i cant tell the difference though
Hey! Is this a caf kernel?
cudi90 said:
Hey! Is this a caf kernel?
Click to expand...
Click to collapse
It's CM kernel
ONLY FIXED OFFLINE CHARGING
WITH FIXED OFFLINE CHARGING FOR ALL N S3 NEO ROMS
THE KENRLE IS COMPLIED BY OPTIMIZED COMPILER
AND USE ANYKENREL2 Soo.. WILL WORK IN ANY N ROMS
#HOW TO FLASH
1)DOWNLOAD THE kernel_s3_neo.zip
2)REBOOT TO RECOVERY ( TWRP)
3)FLASH THE ZIP
4) ENJOY IT
THANKS :
Thargorsson , ToXiTe
Source Code :
https://github.com/S3NEO/android_kernel_samsung_s3ve3g
Stable Kernel v2
I Used Source Kernel ToXiKernel
Changes:
Removed underclock GPU
Removed overclock GPU
Removed underclock CPU
Removed overclock CPU
Fix FM Radio
Built with UBERTC 6.0.0
And a few minor changes
THANKS :
ToXiTe
Source Code :
https://github.com/Y-T-G/android_kernel_samsung_s3ve3g
with dirty unicorn 7.1.2 does not work
Wotks good for me. Thanks for this Kernel.I like it, becsuse Toxi kernel is not compatible with actual los 14.1 builds.
Stable Kernel v2 :
I Used Source Kernel ToXiKernel
Changes:
Removed underclock GPU
Removed overclock GPU
Removed underclock CPU
Removed overclock CPU
Fix FM Radio
Built with UBERTC 6.0.0
And a few minor changes
Its possible to build a version for 7200mAh battery?
Or tell how modify this kernel to manage an anker 7200 mah....thanks
needforszpit said:
Its possible to build a version for 7200mAh battery?
Click to expand...
Click to collapse
sorry
I'm not a professional and I do not know about it
jcperaltah said:
Or tell how modify this kernel to manage an anker 7200 mah....thanks
Click to expand...
Click to collapse
sorry
I'm not a professional and I do not know about it
Tnanls for your work. Any day anybidy can do this.
I'm not profeesional too. My work as a programmer is 1%.
yas2020 said:
sorry
I'm not a professional and I do not know about it
Click to expand...
Click to collapse
LOL another entusiant "coder" without any knowledge about it
Some switches on-off switching is not enough to say is enough to release anything
I say "learn more" and in future I hope U release a realy good work.
Thanks for response.
Download link???
mandeepsinghbagga said:
Download link???
Click to expand...
Click to collapse
https://mega.nz/#!F6hE2Qba!WJJ9MhFbeY0RH0JgYUyVsC3aEKlDRrKwm9kUKOt0EaE