Hi,
I'm really new to these unit and have recently fitted one to replace a COMAND 2.0 in a Mercedes.
Is the unit capable of sending station information to the instrument display as the COMAND does?
Apart from this and a couple of minor issue it is currently working OK but I am looking to install either the Malaysk or Hal9k custom ROM.
If it helps I noticed in the factory options it was set to Mercedes Simple.
MTCE_LM 2.88_1
PX5 build is dated 20180607.154634 test keys
Similar issue here (Mercedes w164). I opened a thread for the can bus where you can participate.
Car model ?
Related
[PX5] Dasaita Head Unit or Peugeot 208 - 2014 - Radio & Steering Wheel not working
Hello all, I have an issue with my Android Head Unity for my Peugeot 208 from 2014. I have installed and attached everything accordingly and everything is (almost) working perfectly. Except for two issues...
Steering Wheel Study not working
None of my Steering Wheel keys are working currently. I have checked if the correct Canbus-option is selected in the settings (according to the seller it's the correct one), but I still have some cables hanging loose from the back of the head unity (KEY1 & KEY2), do I need to plug these into the canbus decoder, or just keep them hanging loose?
Radio FM not working great...
I got the radio working, but sadly, the connection/signal is static/bad. I have tried connected the antenna/radio cable to the white and/or blue connecters that fit from my car, but both should be connected I guess... But I only have one cable that fits it from my android head unit.
Hopefully someone can help me out... Since the guide from the seller is not helping at all...
berserkrico said:
Hello all, I have an issue with my Android Head Unity for my Peugeot 208 from 2014. I have installed and attached everything accordingly and everything is (almost) working perfectly. Except for two issues...
Steering Wheel Study not working
None of my Steering Wheel keys are working currently. I have checked if the correct Canbus-option is selected in the settings (according to the seller it's the correct one), but I still have some cables hanging loose from the back of the head unity (KEY1 & KEY2), do I need to plug these into the canbus decoder, or just keep them hanging loose?
Radio FM not working great...
I got the radio working, but sadly, the connection/signal is static/bad. I have tried connected the antenna/radio cable to the white and/or blue connecters that fit from my car, but both should be connected I guess... But I only have one cable that fits it from my android head unit.
Hopefully someone can help me out... Since the guide from the seller is not helping at all...
Click to expand...
Click to collapse
Hi! I have a Peugeot wir PX5 too. From what i know the canbus is the only thing you need to connect. So when the canbus is connected, you don't need to connect the KEY1 and KEY2.
The FM is working great by my head unit. Maybe you need to go to the factory settings and change the settings for canbus and for fm ?
Musti222 said:
Hi! I have a Peugeot wir PX5 too. From what i know the canbus is the only thing you need to connect. So when the canbus is connected, you don't need to connect the KEY1 and KEY2.
The FM is working great by my head unit. Maybe you need to go to the factory settings and change the settings for canbus and for fm ?
Click to expand...
Click to collapse
Thanks for the reply.. Sadly the seller is only responding with: "Connect key1 and key2 to your car wiring"... But I can't even find which wires are supposedly are the keys on my steering wheel, hehe. So I'm stuck! Thankfully, they're sending a replacement canbus, hopefully that one will do the trick.
Hi guys, hoping you can assist...I've had an Xtrons unit installed in my Audi TT for about a year now. One day as I was driving, I was listening to music from my phone via A2DP. Midway I switched my phone to my bluetooth headphones so I could listen on those in one ear. It seems the phone stayed paired to the head unit but the music was coming through the earpiece fine, no sound off the headunit.
Ever since that day, I've had no sound coming out of the head unit at all. I've done a factory reset, unpaired any bluetooth devices, and just tried listening to radio, but no sound comes out at all. I thought maybe the amp fuse was blown so checked that and it isnt that. I've pulled the unit forward and no cables are loose
I've contacted Xtrons to try and see if there's a new firmware in the hope that will fix it. My current build is shown below.
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20181206.171300 test-keys
Has anyone else experienced this? I'm hoping its a software issue and something didnt blow inside the unit itself. Everything else works fine, just no sound
Here you are a complete repository for mtcd units.
Select px5 and android 8 (oreo). Select any manufacturer (all rom are compatible)
Яндекс
Найдётся всё
disk.yandex.ru
Perhaps you need to upgrade your mcu as well.
Check on the repository or on xda forum for your specific manufacturer mcu upgrade
Hello everyone, i recentrly bought an android head unit for my car, a seat Ibiza 2016 restyling. Everything is working as expected except for the phone functionality using steering wheel controls. Other steering wheel buttons works as expected and the little display i have behind the steering wheel shows the radio frequency correctly but the phone part does not work. I can directly use the head unit to call but i wanted to know if someone had the same problem and maybe can give me some suggestions or a way to send that signal to the can box to let the onboard computer manage the phone functionality. The head unit is a Roverone px5 MTCE mcu.
Thanks for everyone who can help me
Dear all
I hope you can help me! as I cannot get anymore support from the hardware supplier -> his on-line shop has disappeared.....
I recently bought a PX5 HU with Andoird 10 but I am experiencing some problems with my Peugeot 308 "Park Assist" Can Bus messages erroneously and erratically popping up on the screen of my Android HU (see video)
I have managed to enter into the factory setting (code126) to set-up the canbus such that I can control the HU with my steering wheel controls, bat as soon as I select a working canbus protocol working with my car, I get also these nasty and annoying park assist popping up messages ..
This is making my HU not very pratical to use., as these popping up messages are pretty frequent
I have no clue how to remove these messages .. shall it be with an additional software on the HU, or Hardware, or with the car manufacturer, or the canbus decoder that shall be change to a one more specific to my car (Peugeot 308 from 2010)
I have tried to also update my MCU file... but this didn't help
Any help /recommendations would be very much appreciated
Many thanks in advance
Is it an MTCD device, post MCU version
Hi Marchnz
Thank you for your message
It is a MTCE MCU
I had the version [email protected]_V3.57_1 when I bought my PX5 and just upgraded it to the latest one I could find on this forum, i.e. the MTCE_MX_V3.71 5 with car logo ! ;p
But this has not helped me and I still have the same strange problem with the brief and intermittent canbus park assist messages
I am just wondering where I should start looking for a solution ..
Shall it be the CanBus decoder to be changed... modify or upgrade the canbus app in my HU, or the car setting app ???
Or maybe can I attempt to reprogram the steering wheel controls ?
How can I stop these fake park assist canbus messages to reach and be decoded by my PX5 head unit???
any software to be recommended?
Thank you for any help / advice you could give !
Gari126 said:
Hi Marchnz
Thank you for your message
It is a MTCE MCU
I had the version [email protected]_V3.57_1 when I bought my PX5 and just upgraded it to the latest one I could find on this forum, i.e. the MTCE_MX_V3.71 5 with car logo ! ;p
But this has not helped me and I still have the same strange problem with the brief and intermittent canbus park assist messages
I am just wondering where I should start looking for a solution ..
Shall it be the CanBus decoder to be changed... modify or upgrade the canbus app in my HU, or the car setting app ???
Or maybe can I attempt to reprogram the steering wheel controls ?
How can I stop these fake park assist canbus messages to reach and be decoded by my PX5 head unit???
any software to be recommended?
Thank you for any help / advice you could give !
Click to expand...
Click to collapse
Sounds like canbus decoder, the role of the canbus decoder is to listen for vehicle specific canbus messages and signal the headunit.
Hi!
I have a wondefoo MTCE unit with MCU HXD v3.71_1, and i have doubts about rom installation. Its possible install other rom from other manufacturer, for example dasaita? How i can know what roms are compatible? Can i change MCU for other?
The second doubt is about can bus decoder. I have a can bus decoder for the car (Citroen Jumpy 2013), but the unit in factory settings has few optios for cars in canbus selection, and it doesn't work. It´s possible to increase or modify canbus cars selection?
Thanks a lot.
If MTCE/H-HXD you can