Related
Pre-Requirement File for Selfie
★ Zenfone Selfie with Unlocked Bootloader ★
★ Zenfone Selfie Recovery ToolKit ★
How to Install TWRP Recovery On Zenfone Selfie
Step 1. Download and Install ADB fastboot tool on PC.
Step 2. Enable USB Debugging mode on ZenFone Selfie (Settings>Developer Options> USB Debugging)
Step 3. Extract Zenfone Selfie Recovery ToolKit
Step 4. Connect ZenFone Selfie with your PC
Step 5. At toolkit Folder Press shift + mouse right click > open command here
Step 6. Type these command in sequence (enter after each line):
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot oem reboot -recovery
Step 9. Wait for the device restart and entered the recovery
Step 10. Done
Asus Zenfone Selfie Easy Root
::::::: Procedure Rooting Asus Zenfone Selfie:::::::
# go to twrp recovery by pressing (power button+ volume up
button)
#select Install from sd card > install zip from SD card > select – Root Zenfone Selfie.zip> yes.
#then a process will occur.
# wait untill it finished.
#then reboot your Asus Zenfone Selfie
Congrats, you have successfully Rooted Asus Zenfone Selfie
:good::highfive:
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE IN THE PROCESS. DO IT AT YOUR OWN RISK.
did u try on prerooted rom zenfone selfie ?
Hey will this work for Z00UD ?
pls help me , its stuck on
D:\DwnlData\asus_zenfone_selfie_recovery_toolkit>adb reboot bootloader
D:\DwnlData\asus_zenfone_selfie_recovery_toolkit>fastboot flash recovery recover
y.img
< waiting for device >
and on my Asus selfie just saw
Fastboot Mode!!!
and stuck on asus logo (
TWRP ?
Hi everyone !
So I tryed to install CM on my Asus zenfone (Z00UD) and everything worked with no problems until the fastboo oem reboot-recovery.
So I tryed to reboot while pressing the VOLUME DOWN key and i get to the original recovery mode.
My phone is still booting to the usual android when I boot without going in recovery.
So I guess TWRP flash didn't worked as excepted, but i remember it showing completed.
Is there a way to verify that TWRP isn't installed so i can re install it ?
Or is it another problem ?
Hiroyt01 said:
Hi everyone !
So I tryed to install CM on my Asus zenfone (Z00UD) and everything worked with no problems until the fastboo oem reboot-recovery.
So I tryed to reboot while pressing the VOLUME DOWN key and i get to the original recovery mode.
My phone is still booting to the usual android when I boot without going in recovery.
So I guess TWRP flash didn't worked as excepted, but i remember it showing completed.
Is there a way to verify that TWRP isn't installed so i can re install it ?
Or is it another problem ?
Click to expand...
Click to collapse
Hi,
Did you use all this three Codes???
"
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot oem reboot -recovery
"
reddyarunm46 said:
Hi,
Did you use all this three Codes???
"
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot oem reboot -recovery
"
Click to expand...
Click to collapse
Yes that is exactly what i used (Except replacing the recovery.img by the twrp.img name)
I also tryed fastboot oem reboot-recovery (without the space)
Hiroyt01 said:
Yes that is exactly what i used (Except replacing the recovery.img by the twrp.img name)
I also tryed fastboot oem reboot-recovery (without the space)
Click to expand...
Click to collapse
Instead of replacing the recovery.img by the twrp.img name jus replace "recovery" with the file name that you have downloaded!!!!
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
Hiroyt01 said:
Yes that is exactly what i used (Except replacing the recovery.img by the twrp.img name)
I also tryed fastboot oem reboot-recovery (without the space)
Click to expand...
Click to collapse
If you have downloaded from the above link in the thread then dont replace anything just use the codes.
reddyarunm46 said:
Instead of replacing the recovery.img by the twrp.img name jus replace "recovery" with the file name that you have downloaded!!!!
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
If you have downloaded from the above link in the thread then dont replace anything just use the codes.
Click to expand...
Click to collapse
I used dl.twrp.me/Z00T/ recovery (to get the latest), and I replaced "recovery.img" by "twrp-3.0.2-5-Z00T.img" in the fastboot comand line. I also put "twrp-3.0.2-5-Z00T.img" in the same folder as "recovery.img".
Should I try again the process with the recovery.img ?
Is it safe to try again to flash the recovery ? (I didn't try again the process because I don't know if it's safe)
Hiroyt01 said:
I used dl.twrp.me/Z00T/ recovery (to get the latest), and I replaced "recovery.img" by "twrp-3.0.2-5-Z00T.img" in the fastboot comand line. I also put "twrp-3.0.2-5-Z00T.img" in the same folder as "recovery.img".
Should I try again the process with the recovery.img ?
Is it safe to try again to flash the recovery ? (I didn't try again the process because I don't know if it's safe)
Click to expand...
Click to collapse
its all right....it worked for me..
Ok thanks, I'll try to flash again when getting home tonight.
Which of those 2 recovery do you recommend using ?
Hiroyt01 said:
Ok thanks, I'll try to flash again when getting home tonight.
Which of those 2 recovery do you recommend using ?
Click to expand...
Click to collapse
1st try with the recovery you downloaded for the thread . Then if you want to update you can do it as well using an TWRP App from play store ...
Can't install Twrp
I did as said above.
But I'm getting Failed to send data (Unknown error)
Please help me to install twrp
Asus zenfone selfie Z00UD android Marshmallow
Hello sir good afernoon,
Im Jon from Philippines and my problem is can you help me how to root my Asus zenfone selfie Z00UD running android marshmallow and install TWRP, because I dont know what to do. PLEASE help me sir.. GODBLESS
Stuck at "fastboot oem reboot -recovery"
C:\Users\StreetLuck\Desktop\Asus ZenFie\asus_zenfone_selfie_recovery_toolkit>adb devices
List of devices attached
FAAZCY041912 device
C:\Users\StreetLuck\Desktop\Asus ZenFie\asus_zenfone_selfie_recovery_toolkit>adb reboot bootloader
C:\Users\StreetLuck\Desktop\Asus ZenFie\asus_zenfone_selfie_recovery_toolkit>fastboot flash recovery recovery.img
target reported max download size of 268435456 bytes
sending 'recovery' (29436 KB)...
OKAY [ 0.924s]
writing 'recovery'...
OKAY [ 1.136s]
finished. total time: 2.061s
This is where I got problem:
C:\Users\StreetLuck\Desktop\Asus ZenFie\asus_zenfone_selfie_recovery_toolkit>fastboot oem reboot -recovery
...
FAILED (remote: unknown command)
finished. total time: 0.001s
how to resolve?
Please help me. Thanks.
ash_zairy said:
C:\Users\StreetLuck\Desktop\Asus ZenFie\asus_zenfone_selfie_recovery_toolkit>adb devices
List of devices attached
FAAZCY041912 device
C:\Users\StreetLuck\Desktop\Asus ZenFie\asus_zenfone_selfie_recovery_toolkit>adb reboot bootloader
C:\Users\StreetLuck\Desktop\Asus ZenFie\asus_zenfone_selfie_recovery_toolkit>fastboot flash recovery recovery.img
target reported max download size of 268435456 bytes
sending 'recovery' (29436 KB)...
OKAY [ 0.924s]
writing 'recovery'...
OKAY [ 1.136s]
finished. total time: 2.061s
This is where I got problem:
C:\Users\StreetLuck\Desktop\Asus ZenFie\asus_zenfone_selfie_recovery_toolkit>fastboot oem reboot -recovery
...
FAILED (remote: unknown command)
finished. total time: 0.001s
how to resolve?
Please help me. Thanks.
Click to expand...
Click to collapse
Same problem for me, did you solved it?
Elmengardo said:
Same problem for me, did you solved it?
Click to expand...
Click to collapse
at that point try this command: fastboot boot recovery.img
it worked for me
does it work in Asus Zenfone Selfie ZD551KL Z00UD android 6.0.1?
fastboot oem reboot -recovery faild how i solve it ?
C:\Users\acer\Desktop\New folder\asus_zenfone_selfie_recovery_toolkit>fastboot oem reboot -recovery
...
FAILED (remote: unknown command)
finished. total time: 0.002s
how to resolve my phone is asus zenfone selfie
android version : 6.0.1
how i solve it ?
Hiroyt01 said:
Hi everyone !
So I tryed to install CM on my Asus zenfone (Z00UD) and everything worked with no problems until the fastboo oem reboot-recovery.
So I tryed to reboot while pressing the VOLUME DOWN key and i get to the original recovery mode.
My phone is still booting to the usual android when I boot without going in recovery.
So I guess TWRP flash didn't worked as excepted, but i remember it showing completed.
Is there a way to verify that TWRP isn't installed so i can re install it ?
Or is it another problem ?
Click to expand...
Click to collapse
I have the same phone Hiroyte but I cant unlock bootloader because the system does not boot to OS >> any help to do this without boot into the system ?
thanks
Installed oxygen OS 4.0 everything seems to become OK
but after flashing twrp 3.0.2 to the phone it is just hanging in a black screen.
I tried several twrp alternatives from XDA: always same result.
After some seconds up to some minutes it is possible to reboot but no twrp has been flashed.
The twrp 3.0.2 works fine in the old version of OS oxygen
RoFrie said:
Installed oxygen OS 4.0 everything seems to become OK
but after flashing twrp 3.0.2 to the phone it is just hanging in a black screen.
I tried several twrp alternatives from XDA: always same result.
After some seconds up to some minutes it is possible to reboot but no twrp has been flashed.
The twrp 3.0.2 works fine in the old version of OS oxygen
Click to expand...
Click to collapse
Hi, you can fix it. Flash OnePlus3_OpenBeta7-FIRMWARE+MODEM-flashable.zip
https://www.androidfilehost.com/?fid=457095661767116249
I use this twrp and works!
You need PC to see youre phone in FASTBOOT. ADB + drivers instaled.
Reboot youre phone in Fastboot (Boot loader), then flash recovery. After flashing reboot to recovery.
sakarya1980 said:
Hi, you can fix it. Flash OnePlus3_OpenBeta7-FIRMWARE+MODEM-flashable.zip
https://www.androidfilehost.com/?fid=457095661767116249
I use this twrp and works!
Click to expand...
Click to collapse
I'd like to know some details before installing:
FIRMWARE+MODEM what is this? Is firmware the whole oxygen OS? Modem is for mobile connection like LTE?
What are the advantages in comparison of using the originals?
Can you give me the origin of the twrp you attached?
null0seven said:
You need PC to see youre phone in FASTBOOT. ADB + drivers instaled.
Reboot youre phone in Fastboot (Boot loader), then flash recovery. After flashing reboot to recovery.
Click to expand...
Click to collapse
I think I did exactly what you described. But nothing in the newly flashed TWRP resulted must in a black screen.
Install the modified TWRP v 3.0.2.1-28. Search in XDA you should find it. Flash it and boot into recovery. I installed it and flashed OOS 4.0 OTA through this recovery. Everything is working fine.
Black screen means you did not flash it.
Open Command Promt. Type:
fastboot flash recovery "recovery".img. (name of the recovery between commas)
reboot bootloader.
reboot to recovery.
Because we don't have any twrp updated to support Nougat oos roms. The ones we have can only read decrypted storage. I'm too waiting for someone to pick up the development and build an updated twrp.
Flashing this one works
null0seven said:
Black screen means you did not flash it.
Open Command Promt. Type:
fastboot flash recovery "recovery".img. (name of the recovery between commas)
reboot bootloader.
reboot to recovery.
Click to expand...
Click to collapse
But the log said the flash was ok:
fastboot flash recovery twrp-3.0.2-1-oneplus3.img
target reported max download size of 440401920 bytes
sending 'recovery' (18964 KB)...
OKAY [ 0.432s]
writing 'recovery'...
OKAY [ 0.160s]
finished. total time: 0.594s
---------- Post added at 12:43 PM ---------- Previous post was at 12:33 PM ----------
mavidser said:
Flashing this one works
Click to expand...
Click to collapse
YES
This one works.
But my phone is encrypted and as written by abhibnl decrypting is not possible right now.
RolfFrie said:
But the log said the flash was ok:
fastboot flash recovery twrp-3.0.2-1-oneplus3.img
target reported max download size of 440401920 bytes
sending 'recovery' (18964 KB)...
OKAY [ 0.432s]
writing 'recovery'...
OKAY [ 0.160s]
finished. total time: 0.594s
---------- Post added at 12:43 PM ---------- Previous post was at 12:33 PM ----------
YES
This one works.
But my phone is encrypted and as written by abhibnl decrypting is not possible right now.
Click to expand...
Click to collapse
Yeah, I noticed that too, after writing the comment.
For me though, I only needed to create the Nandroid backup and flash SuperSU, so I flashed the recovery, cancelled the decryption, formatted the data (removing the encryption), adb push'd the zip and installed it.
Any idea how I can turn the encryption back on now?
@RoFrie I originally had the same problem as you but with the difference that my phone was on OOS 3.2.8 and it upgrade to N. after that I tried TWRP but the phone would replace it every time I rebooted. Once I got the right TWRP I can boot to it but the internal drive was encrypted so TWRP was useless. I said forget this crap I'm going back to CM14.1. And as always I felt that I had to get this done. So once on CM14.1 I used TWRP to switch the file system to s2fs flash OOS3.2.8 than I let it do the upgrade yet again. This time when I flashed the TWRP .28 the phones was no longer encrypted,I rooted than its all good now.
Sent from my ONEPLUS A3000 using Tapatalk
What was the file?
RolfFrie said:
But the log said the flash was ok:
fastboot flash recovery twrp-3.0.2-1-oneplus3.img
target reported max download size of 440401920 bytes
sending 'recovery' (18964 KB)...
OKAY [ 0.432s]
writing 'recovery'...
OKAY [ 0.160s]
finished. total time: 0.594s
---------- Post added at 12:43 PM ---------- Previous post was at 12:33 PM ----------
YES
This one works.
But my phone is encrypted and as written by abhibnl decrypting is not possible right now.
Click to expand...
Click to collapse
You need the unreleased beta twrp. Encrypted and rooted OOS 4.0.3 here
Sent from my ONEPLUS A3000 using Tapatalk
Someone needs to start this. I can't believe no one has yet looked at this. Tell me someone has achieved some of this please.
GodKingKnight said:
Someone needs to start this. I can't believe no one has yet looked at this. Tell me someone has achieved some of this please.
Click to expand...
Click to collapse
I also was wondering everytime i came to this forum, why no developer yet did not showup here. Is asus not devs friendly.. i am planning to buy it but only after i will see some hope of custom rom development.
nadeem_naddy said:
I also was wondering everytime i came to this forum, why no developer yet did not showup here. Is asus not devs friendly.. i am planning to buy it but only after i will see some hope of custom rom development.
Click to expand...
Click to collapse
I am also checking 5z forums daily
Asus have launched kernel sources and it is project treble supported and custom rom development is easy so looking forward for some development to start:crying::crying::crying:
i was planning to buy this phone as i wanted to flash resurrection remix but guess have to wait
The phone released recently, and very late in the year. Most devs are on treble phones, or ones like the OnePlus 6. The phone is probably treble compliant, so in theory owners can use any treble ROM.
TWRP to ZS620KL (snapdragon 845, 8/256GB)
I am looking for TWRP to ZS620KL (snapdragon 845, 8/256GB) can anyone help me? It does not work for ZE620KL, unfortunately. I need a good TWRP urgently.
jakubdg said:
I am looking for TWRP to ZS620KL (snapdragon 845, 8/256GB) can anyone help me? It does not work for ZE620KL, unfortunately. I need a good TWRP urgently.
Click to expand...
Click to collapse
Have you unlocked the bootloader ??
is it same as zenfone 5 2018
If yes then share the method
Akash1998 said:
Have you unlocked the bootloader ??
is it same as zenfone 5 2018
If yes then share the method
Click to expand...
Click to collapse
Yes I have unlocked bootloader. I used official asus apk
Then downloaded twrp-3.2.1-0-X00Q-20180508.img
Next fastboot flash boot recovery.img and fastboot flash recovery recovery.img - I saw Bootloader Version is empty
Now I dont know how I have older bootloader version WW_user_80.11.37.53 but I do not have twrp.
Edit: Please use my updated guide:
https://forum.xda-developers.com/zenfone-5z/how-to/guide-zenfone-5z-how-to-root-downgrade-t3815877
Here is what i did to root the 5Z ZS620KL:
1. Download the unlock app AND the installed firmware from asus:
download
2. Install adb and fastboot
download
3. Copy the app to the phone, start it and follow the on screen instructions > bootloader unlocked
Warning: When booting the phone you will now see a warning message!
4. Unzip the downloaded firmware and use a tool to extract the boot.img from the payload.bin. I used payload_dumper.
download
5. Copy the extracted boot.img from payload_output folder to the 5z.
6. Download magisk manager app from the officiall thread on xda, install it and use it to patch the boot.img on your phone (install>install>patch boot.img)
download
7. Copy the patched_boot.img back to your computer (the original boot.img will be approx 65mb the patched one approx 19mb)
8. Start your phone in fasboot mode (hold "power + volume up" to switch on your phone). You will see "FastBoot Mode" in red letters on screen. Connect your phone to the computer using the usb cable.
9. Open a command line and check if your phone is recognized by executing:
Code:
fastboot devices
You should see the serial number of your phone.
10. Change to the path where you copied your patched_boot.img and use fastboot to flash the patched_boot.img to your device:
Code:
fastboot flash boot patched_boot.img
11. Start your phone from the fastboot menu using volume up/down and power to select.
Bugs/problems:
- You will see three warning messages while booting, at least i do. One for the unlocked bootloader and the next one comes twice saying "There is an internal problem with your device. Contact your manufacturer for details." which you have to confirm.
- I used the latest stable Magisk V16.0 + Manager V5.8 and Magisk hide is not working. It does not save the apps marked for hide. Maybe some write error?
I have purchased zenfone 5Z but it's model number on box is ZS621KL. I see the guide posted for rooting and TWRP install is for ZS620KL. is this same guide applicable to my model as well or this is a different version something like zenfone 5 and Not zenfone 5 Z
isthisadagger said:
Here is what i did to root the 5Z ZS620KL:
1. Download the unlock app AND the installed firmware from asus:
download
2. Install adb and fastboot
download
3. Copy the app to the phone, start it and follow the on screen instructions > bootloader unlocked
Warning: When booting the phone you will now see a warning message!
4. Unzip the downloaded firmware and use a tool to extract the boot.img from the payload.bin. I used payload_dumper.
download
5. Copy the extracted boot.img from payload_output folder to the 5z.
6. Download magisk manager app from the officiall thread on xda, install it and use it to patch the boot.img on your phone (install>install>patch boot.img)
download
7. Copy the patched_boot.img back to your computer (the original boot.img will be approx 65mb the patched one approx 19mb)
8. Start your phone in fasboot mode (hold "power + volume up" to switch on your phone). You will see "FastBoot Mode" in red letters on screen. Connect your phone to the computer using the usb cable.
9. Open a command line and check if your phone is recognized by executing:
Code:
fastboot devices
You should see the serial number of your phone.
10. Change to the path where you copied your patched_boot.img and use fastboot to flash the patched_boot.img to your device:
Code:
fastboot flash boot patched_boot.img
11. Start your phone from the fastboot menu using volume up/down and power to select.
Bugs/problems:
- You will see three warning messages while booting, at least i do. One for the unlocked bootloader and the next one comes twice saying "There is an internal problem with your device. Contact your manufacturer for details." which you have to confirm.
- I used the latest stable Magisk V16.0 + Manager V5.8 and Magisk hide is not working. It does not save the apps marked for hide. Maybe some write error?
Click to expand...
Click to collapse
where can I find payload.bin ?
---------- Post added at 05:08 PM ---------- Previous post was at 05:07 PM ----------
where can I find payload.bin?
---------- Post added at 06:29 PM ---------- Previous post was at 06:08 PM ----------
where can I find payload.bin ?
I need help...
when I try upload twrp twrp-3.2.1-0-X00Q-20180508.img
(SK620KL snap845 8/256GB unlocked)
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot twrp-3.2.1-0-X00Q-20180508.img
target reported max download size of 268435456 bytes
sending 'boot' (25244 KB)...
OKAY [ 0.552s]
writing 'boot'...
OKAY [ 0.103s]
finished. total time: 0.658s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-3.2.1-0-X00Q-20180508.img
target reported max download size of 268435456 bytes
sending 'recovery' (25244 KB)...
OKAY [ 0.557s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.570s
then in Fastboot Mode I have: BOOTLOADER VERSION - Error
the phone does not start ((
maybe other recovery.img??
When and where you have find a TWRP recovery for ZenFone 5 z (SK620KL) ??????!!!!!!!!!!!?????????
Reflash stock recovery if you can but you flash wrong TWRP for your model of your device ..... You soft brick or hard brick your device
Before READ the tutorial step by step and watch the model of the device ............ It's the base for an hacker
You have ZenFone 5 z with stock rom like pixel rom with the snp 845 what do you need ? why you want install TWRP no custom rom at this moment just trebble project but it's not for now the best way
And ZenFone 5 received Android P just wait
jakubdg said:
I need help...
when I try upload twrp twrp-3.2.1-0-X00Q-20180508.img
(SK620KL snap845 8/256GB unlocked)
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot twrp-3.2.1-0-X00Q-20180508.img
target reported max download size of 268435456 bytes
sending 'boot' (25244 KB)...
OKAY [ 0.552s]
writing 'boot'...
OKAY [ 0.103s]
finished. total time: 0.658s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-3.2.1-0-X00Q-20180508.img
target reported max download size of 268435456 bytes
sending 'recovery' (25244 KB)...
OKAY [ 0.557s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.570s
then in Fastboot Mode I have: BOOTLOADER VERSION - Error
the phone does not start ((
maybe other recovery.img??
Click to expand...
Click to collapse
If your computer is able to use fastboot.exe.
Please try
Download WW__ZS620KL_80.10.8.54_MP_user_20180517175955_release.zip
Extract this zip file.
Connect your 5Z with your computer.
Start cmd, and move into path to folder (WW__ZS620KL_80.10.8.54_MP_user_20180517175955_release) .
Type `flashall_AFT.cmd`.
amanfdk said:
I have purchased zenfone 5Z but it's model number on box is ZS621KL. I see the guide posted for rooting and TWRP install is for ZS620KL. is this same guide applicable to my model as well or this is a different version something like zenfone 5 and Not zenfone 5 Z
Click to expand...
Click to collapse
Go to system>about phone> sofware version and check your version. Mine starts with WW_80.11.37.69. You need to download the right firmware version from asus (WW or JP). It should work for ZS621KL.
isthisadagger said:
Go to system>about phone> sofware version and check your version. Mine starts with WW_80.11.37.69. You need to download the right firmware version from asus (WW or JP). It should work for ZS621KL.
Click to expand...
Click to collapse
Mine is also similar. So have you tried this guide is our working for you.
Renaf2 said:
When and where you have find a TWRP recovery for ZenFone 5 z (SK620KL) ??????!!!!!!!!!!!?????????
Reflash stock recovery if you can but you flash wrong TWRP for your model of your device ..... You soft brick or hard brick your device
Before READ the tutorial step by step and watch the model of the device ............ It's the base for an hacker
You have ZenFone 5 z with stock rom like pixel rom with the snp 845 what do you need ? why you want install TWRP no custom rom at this moment just trebble project but it's not for now the best way
And ZenFone 5 received Android P just wait
Click to expand...
Click to collapse
I wanted to install twrp + root + adaway or other adblock nothing more... I used this info getdroidtips.com/root-twrp-recovery-asus-zenfone-5z
Now I have problem, 5Z still rebooting when I go to recovery or bootloader or start system
---------- Post added at 11:54 AM ---------- Previous post was at 11:27 AM ----------
GSPD said:
If your computer is able to use fastboot.exe.
Please try
Download WW__ZS620KL_80.10.8.54_MP_user_20180517175955_release.zip
Extract this zip file.
Connect your 5Z with your computer.
Start cmd, and move into path to folder (WW__ZS620KL_80.10.8.54_MP_user_20180517175955_release) .
Type `flashall_AFT.cmd`.
Click to expand...
Click to collapse
It works!!! Thank you very much! )
How can I install twrp, root? I want to run adaway or adblock
I have another question, now I have version ww_user_80.10.8.54 I would like to have new version WW-80.11.37.86. How can I install? OTA not work, how can I install zip file from asus.com/Phone/ZenFone-5Z-ZS620KL/HelpDesk_BIOS ? I would like to have a new version with twrp/root
jakubdg said:
I have another question, now I have version ww_user_80.10.8.54 I would like to have new version WW-80.11.37.86. How can I install? OTA not work, how can I install zip file from asus.com/Phone/ZenFone-5Z-ZS620KL/HelpDesk_BIOS ? I would like to have a new version with twrp/root
Click to expand...
Click to collapse
Talking about the steps what I have done for update my 5z.
Put the zip file that you downloaded on /sdcard/
And reboot.
After these steps, the device will find the update and let you to operate to update.
Please try .
GSPD said:
Talking about the steps what I have done for update my 5z.
Put the zip file that you downloaded on /sdcard/
And reboot.
After these steps, the device will find the update and let you to operate to update.
Please try .
Click to expand...
Click to collapse
It works! Super, I have WW-80.11.37.86
How can I install twrp and root?
hello everyone
My pixel 2xl just only boot on bootloader after erase system_a and bla bla. just follow instruction. but when flash the flash-all.bat seem like postive. but the result shown not a same baseband (something like that)
so now my phone only can open bootloader. if trying open recovery in bootloader it will repeat to bootloader back.
just hope someone can help me. my fault cause take it easy as like others smartphone to root.
maybe cause the erase system. all the partition is empty ?
this all quarantine fault :crying:
please helpppp
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
syeikh52 said:
hello everyone
My pixel 2xl just only boot on bootloader after erase system_a and bla bla. just follow instruction. but when flash the flash-all.bat seem like postive. but the result shown not a same baseband (something like that)
so now my phone only can open bootloader. if trying open recovery in bootloader it will repeat to bootloader back.
just hope someone can help me. my fault cause take it easy as like others smartphone to root.
maybe cause the erase system. all the partition is empty ?
this all quarantine fault :crying:
please helpppp
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Why would you erase the system? Were you trying to flash another ROM or something?
---------- Post added at 11:05 AM ---------- Previous post was at 11:03 AM ----------
You'll most likely need to re-flash a stock image.
https://developers.google.com/android/images
Fastboot flash your bootloader, radio then vendor on both slots then try again.
Ragarianok said:
Why would you erase the system? Were you trying to flash another ROM or something?
---------- Post added at 11:05 AM ---------- Previous post was at 11:03 AM ----------
You'll most likely need to re-flash a stock image.
https://developers.google.com/android/images
Click to expand...
Click to collapse
hm. im just follow instruction from
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-progress-available-t3876849
everything okay but its failed in the step F
now it only can open bootloader.
and my bootloader version change from TMZ30 to TMZ10n
Edmontonchef said:
Fastboot flash your bootloader, radio then vendor on both slots then try again.
Click to expand...
Click to collapse
did you have the instruction or link ?
i will make the problem more hardly :crying::crying::crying:
syeikh52 said:
did you have the instruction or link ?
i will make the problem more hardly :crying::crying::crying:
Click to expand...
Click to collapse
Make sure adb and fastboot are installed
Download and extract taimen factory image
Double click to open
Extract the taimen folder found in the factory image. That has the vendor image
Open terminal and type adb devices to make sure you have adb connected. Boot to bootloader
Here's the commands, after the command hit space then drag and drop the image hit enter.
Fastboot flash bootloader_a (bootloader)
Reboot bootloader
Same command but with _b
Then radio and vendor same way rebooting bootloader after each flash
Now you can use that taimen folder you extracted. Drag and drop same as images
Fastboot update (taimen folder)
It'll take a few minutes to do it's thing
---------- Post added at 02:57 AM ---------- Previous post was at 02:53 AM ----------
ABC ezio has some better instructions
https://forum.xda-developers.com/cu...ive/rom-builders-collective-t2861778/page2324
Edmontonchef said:
Make sure adb and fastboot are installed
Download and extract taimen factory image
Double click to open
Extract the taimen folder found in the factory image. That has the vendor image
Open terminal and type adb devices to make sure you have adb connected. Boot to bootloader
Here's the commands, after the command hit space then drag and drop the image hit enter.
Fastboot flash bootloader_a (bootloader)
Reboot bootloader
Same command but with _b
Then radio and vendor same way rebooting bootloader after each flash
Now you can use that taimen folder you extracted. Drag and drop same as images
Fastboot update (taimen folder)
It'll take a few minutes to do it's thing
---------- Post added at 02:57 AM ---------- Previous post was at 02:53 AM ----------
ABC ezio has some better instructions
https://forum.xda-developers.com/cu...ive/rom-builders-collective-t2861778/page2324
Click to expand...
Click to collapse
already follow but failed
C:\Users\LEGION\Desktop\repair\taimen-opd1.170816.010>fastboot flash bootloader_a C:\Users\LEGION\Desktop\repair\taimen-opd1.170816.010\image-taimen-opd1.170816.010\vendor.img
Sending 'bootloader_a' (349408 KB) FAILED (Write to device failed (Invalid argument))
fastboot: error: Command failed
:crying::crying::crying::crying::crying:
Sorry for slow replying.
btw before im using andriod 10. but im downloading a 8.0.0 (OPD1.170816.010, Sep 2017)
erkk
im using standard cmd. should i open as admin ?
Edmontonchef said:
Make sure adb and fastboot are installed
Download and extract taimen factory image
Double click to open
Extract the taimen folder found in the factory image. That has the vendor image
Open terminal and type adb devices to make sure you have adb connected. Boot to bootloader
Here's the commands, after the command hit space then drag and drop the image hit enter.
Fastboot flash bootloader_a (bootloader)
Reboot bootloader
Same command but with _b
Then radio and vendor same way rebooting bootloader after each flash
Now you can use that taimen folder you extracted. Drag and drop same as images
Fastboot update (taimen folder)
It'll take a few minutes to do it's thing
---------- Post added at 02:57 AM ---------- Previous post was at 02:53 AM ----------
ABC ezio has some better instructions
https://forum.xda-developers.com/cu...ive/rom-builders-collective-t2861778/page2324
Click to expand...
Click to collapse
Thanks bro idk why
but im just changing the port ti 2.0
before using C to C
then using C to A still problem
now using C to A but using usb hub because this LEGION gaming laptop All usb 3.0
:crying::crying::crying:
now just wanna try to install TWRP
Download twrp.IMG
Fastboot boot (twrp.img)
Go to settings and disable screen timeout and the swipe to install twrp app. Don't need it.
You can flash a stock ota on twrp.
Put whatever you need on a type c thumb drive (stock ota, twrp installer zip, roms) and mount it in twrp.
Just keep in mind if you are going backwards, you'll have to format data.
Exactly a year ago I bought Poco F3, unlocked the bootloader and installed ArrowOS. Now I'm trying to figure out how to change my ROM and I can't really find any answers. I have the ArrowOS recovery and it's useless, I can't install another recovery with it. My fastboot also seems to be broken(?), it has a different logo and it's detected on my computer when I do (fastboot devices) but other than that it gives me a bunch of errors
I would like to at least know how to change the recovery. Is it possible that my bootloader got locked? One last thing, when I installed ArrowOS I used TWRP and updated it using OTA updates, now TWRP is gone.
Please help me
You need fastboot for TWRP.
It could not have gotten locked, no.
Arealhooman said:
It could not have gotten locked, no.
Click to expand...
Click to collapse
I just found a guide on Youtube for flashing twrp and I followed it to the (fastboot boot <TWRP>) part and I got this error
Sending 'boot.img' (196608 KB) FAILED (remote: 'Download is not allowed on locked devices')
fastboot: error: Command failed
Does this mean it got locked..?
Uh….maybe… did you lock it… what does it say in dev Setting sunder oem unlock.
Arealhooman said:
Uh….maybe… did you lock it… what does it say in dev Setting sunder oem unlock.
Click to expand...
Click to collapse
I don't have any oem unlock option in ArrowOS and I never locked anything wtf, I just used it as a normal phone and only did OTA updates + sometimes FW updates when required
Is there anyway to fix it?
ADB & Fastboot Binaries: https://developer.android.com/studio/releases/platform-tools
OrangeFox Recovery (recommended): https://orangefox.download/device/alioth
Install the Recovery ZIP by either ADB Sideload in ArrowOS Recovery
or you can extract the "recovery.img" and fastboot boot it ("fastboot boot recovery.img") and select "Install current Recovery"
Then you simply flash the ROM.zip (select "Reflash Recovery after ROM Flash") -> Reboot Recovery -> Format Data
The OTA Update has replaced your TWRP with ArrowOS Recovery, because ROM Updates replace the boot-partition (along with other system related partitions). The boot-partition contains the recovery-environment.
Only install Custom Recoveries from inside the Recovery, because Fastboot can only replace partitions entirely (and boot-partitions contains both bootloader & recovery)
The bootloader of the Poco F3 cannot (or shouldn't) be locked on Custom Software.
gobertel said:
I just found a guide on Youtube for flashing twrp and I followed it to the (fastboot boot <TWRP>) part and I got this error
Sending 'boot.img' (196608 KB) FAILED (remote: 'Download is not allowed on locked devices')
fastboot: error: Command failed
Does this mean it got locked..?
Click to expand...
Click to collapse
Download these:
https://sourceforge.net/projects/mipa-project/files/arrow-mipa/arrow-13.0/alioth/Additions/boot.img/download
https://sourceforge.net/projects/mipa-project/files/arrow-mipa/arrow-13.0/alioth/Additions/vendor_boot.img/download
First link, "fastboot flash boot boot.img"
Second link, "fastboot flash vendor_boot vendor_boot.img"
Then Fastboot booting into your Recovery-file should work.
Also, what's the problem with ArrowOS anyway? We've ArrowOS MiPa, it's a good and reliable ROM.
cyanGalaxy said:
Download these:
https://sourceforge.net/projects/mipa-project/files/arrow-mipa/arrow-13.0/alioth/Additions/boot.img/download
https://sourceforge.net/projects/mipa-project/files/arrow-mipa/arrow-13.0/alioth/Additions/vendor_boot.img/download
First link, "fastboot flash boot boot.img"
Second link, "fastboot flash vendor_boot vendor_boot.img"
Then Fastboot booting into your Recovery-file should work.
Click to expand...
Click to collapse
I noticed that these are for ArrowOS 13, I'm on 12.1 and they did not work
Do you also suggest I go into fastboot by which method because each one looks different
Recovery > Advanced > Enter fastboot
Or
Hold power button with volume down method
Also I'm just looking to update to Android 13 in general
Thank you for helping me out by the way
gobertel said:
I noticed that these are for ArrowOS 13, I'm on 12.1 and they did not work
Do you also suggest I go into fastboot by which method because each one looks different
Recovery > Advanced > Enter fastboot
Or
Hold power button with volume down method
Also I'm just looking to update to Android 13 in general
Click to expand...
Click to collapse
Both methods of booting into Fastboot is the same I would guess.
Yes we do have ArrowOS MiPa, you should only need to flash the ArrowOS 13 MiPa ROM ZIP in Recovery, but I rather recommend you using OrangeFox or TWRP for that.
What do you mean by "did not work". "Did not work" can mean anything.
Are you using the latest official ADB & Fastboot Binaries? The ones I've given you?
If yes, you can use this Payload Dumper Tool, to extract the "vendor_boot.img" and "boot.img" from ArrowOS 12. Maybe those from Arrow v12 can be flashed.
[Windows] Payload Dumper GUI - dump boot.img and other img files from payload.bin.
Hello there. Was bored and decided to make a gui that dumps Payload.bin file for easy flashing. Tested on Lineage OS 18 Payload.bin Result: Credits: Based on vm03 payload_dumper script. Github: Payload_dumper.py...
forum.xda-developers.com
cyanGalaxy said:
Both methods of booting into Fastboot is the same I would guess.
Yes we do have ArrowOS MiPa, you should only need to flash the ArrowOS 13 MiPa ROM ZIP in Recovery, but I rather recommend you using OrangeFox or TWRP for that.
What do you mean by "did not work". "Did not work" can mean anything.
Click to expand...
Click to collapse
fastboot flash boot boot.img
Sending 'boot_a' (196608 KB) FAILED (remote: 'Download is not allowed on locked devices')
fastboot: error: Command failed
fastboot flash vendor_boot vendor_boot.img
Sending 'vendor_boot_a' (98304 KB) FAILED (remote: 'Download is not allowed on locked devices')
fastboot: error: Command failed
fastboot boot recovery.img
Sending 'boot.img' (196608 KB) FAILED (remote: 'Download is not allowed on locked devices')
fastboot: error: Command failed
Another thing to add is I still I get the unlock symbol when booting up the phone, I dont know if that makes a difference
cyanGalaxy said:
Are you using the latest official ADB & Fastboot Binaries? The ones I've given you?
If yes, you can use this Payload Dumper Tool, to extract the "vendor_boot.img" and "boot.img" from ArrowOS 12. Maybe those from Arrow v12 can be flashed.
[Windows] Payload Dumper GUI - dump boot.img and other img files from payload.bin.
Hello there. Was bored and decided to make a gui that dumps Payload.bin file for easy flashing. Tested on Lineage OS 18 Payload.bin Result: Credits: Based on vm03 payload_dumper script. Github: Payload_dumper.py...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes I'm using the exact one you gave me and I will try it
gobertel said:
Yes I'm using the exact one you gave me and I will try it
Click to expand...
Click to collapse
Yup try it.
Else, here I have the vendor_boot.img & boot.img from the latest ArrowOS MiPa (February). More up-to-date than the SourceForge links.
Either the 2 files from ArrowOS v12, or the latest v13 ones that I've uploaded here, should definitely work.
Also try rebooting Fastboot Mode.
XDA doesn't let me upload the boot.img ඞ
cyanGalaxy said:
XDA doesn't let me upload the boot.img ඞ
Click to expand...
Click to collapse
Starting to think I should just give up, no matter what I do I get (Download is not allowed on locked devices)
The fastboot method you suggested does not work, it gets stuck on (waiting for any devices) but the recovery one works although like I said, I get the error no matter what I do
Is it locked or what?? I'm trying to figure that out and if it is how did it even get locked in the first place
I'm guessing there's no way to resolve it and that I'll be stuck on Android 12 for eternity
So sorry for wasting your time, I always end up with weird issues in everything
gobertel said:
Starting to think I should just give up, no matter what I do I get (Download is not allowed on locked devices)
The fastboot method you suggested does not work, it gets stuck on (waiting for any devices) but the recovery one works although like I said, I get the error no matter what I do
Is it locked or what?? I'm trying to figure that out and if it is how did it even get locked in the first place
I'm guessing there's no way to resolve it and that I'll be stuck on Android 12 for eternity
So sorry for wasting your time, I always end up with weird issues in everything
Click to expand...
Click to collapse
Waiting for any devices means your PC does not detect the phone.
Download this: https://cdn.alsgp0.fds.api.mi-img.com/micomm/MiFlash2020-3-14-0.rar
And install the USB driver.
And no it's not locked, the Unlocked symbol during Boot is normal. I think it was a bug with older ArrowOS Bootloader versions. Not quite sure.
cyanGalaxy said:
Waiting for any devices means your PC does not detect the phone.
Download this: https://cdn.alsgp0.fds.api.mi-img.com/micomm/MiFlash2020-3-14-0.rar
And install the USB driver.
And no it's not locked, the Unlocked symbol during Boot is normal. I think it was a bug with older ArrowOS Bootloader versions. Not quite sure.
Click to expand...
Click to collapse
IT WORKED. Thank you so much, it was a driver issue but the exact version you gave me didn't work, I had to find another one