Hello guys!
To remove "Unlocked" text on splash screen just flash this splash.img file!
You will need:
- Unlocked bootloader (of course)
- PC with Xiaomi/ADB drivers
- Command prompt
1. Download splash.img file down below.
2. Go to cmd and type "fastboot flash splash YOUR splash.img FILE"
3. Hit ENTER and here you go!
(included backup splash.img file in case if something goes wrong)
Nice, didn't know that was possible.
Thanks
Thank you, fantastic.
No problem
*fixed
Thank you, worked flawlessly
There's a zip also. I just find it a little more straightforward going into recovery and using a zip. Here's the one I use every time I clean flash MIUI for firmware updates.
Related
SOLVED SOLVED SOLVED
Hi All
Is there anyone willing to help me recover my phone (presently stuck on logo screen). I've looked at various solutions posted on different forums but I just get confused.
So what I would like is idiots guide on how to do it, including how to write the commands codes so I can flash the updated CWM rom. Tried to work it out but everything I've tried keeps failing and I desperate to get my phone working again.
Please please help
Tell us what you have done so far m8 and the reason for it being stuck. At a guess did you flash the boot.img when installing a Rom?
To install or update recovery, go here and follow the instructions on the second part "Installing A Recovery" Just follow the steps its pretty easy.
http://forum.xda-developers.com/showthread.php?t=1592355
Flash the appropriate boot.IMG for your rom
Sent from my HTC One X using Tapatalk 2
hmmm
Thats what i've trying to do but I can't seem to work out what cmd codes I need to get it to work. All I get is:
'Downloads\OneXRoot' is not recognized as an internal or external command
operable program or batch file.
This error message on everything I try to do incuding flashboot, flashboot recovery etc
Tried micks solution and all it did was open Nero gggrrrrrr
And yes I did flash a boot image but i'm trying to get the updated one onto my phone but because my battery won't charge it proving to be a nightmare
From the link I posted do as the guide says re making a folder called fastboot on C: and then download the files and extract them to fastboot. Replace the end of the guide with instructions for flashing a boot image. The boot.img is usually in the zip of the rom. So you need to extract the boot.img and place it in your C:\fastboot folder
It should go something like this. Use C:\ not Downloads\OneXRoot
1. Download These Fastboot Files
2. Make a new folder on your C: drive called fastboot.
3. Extract The Zip downloaded in step 1 to the new folder
4. The Official Version of CWM has been released and is now capable of flashing all roms, you can grab it HERE
5. download the custom recovery and save it in the same folder as you did the fastboot files
6. Power Phone Off by Holding power button for 10 secs
7. select Fastboot with volume + or - then press power
8. plug your phone into your PC and open a Command Prompt.
(windows XP - Click Start > Run > type CMD in box then press OK
(Windows 7 - Click Start > type CMD in search box then press Enter)
9. cd to your fastboot files folder cd c:\fastboot
10. Then enter fastboot flash boot boot.img and hit enter
11. fastboot erase cache is recommended if you have booting issues
reboot
ignore steps 4 and 5, copy and paste from above link
Going to buy a new phone
Followed your instruction to the letter but it failed to work. I think the problem is with my computer not recognising fastboot and the solution also failed. So I think i'm just going to buy a new phone and thanks for all your help
No need to buy a new phone, stick with it, you'll get there
Maybe give this a try. It does everything for you
http://forum.xda-developers.com/showthread.php?t=1734365
Nice
Thanks thats a solution that will work once I find away to charge my battery. You have been a legend.
Cant you just put it in to recovery or leave it on the hboot screen, then plug in to a wall charger?
In Q&A, find the topic "flashing boot.img hoooooooow????" Or something, and at second side, u have my guide to flash boot.img files. Hope it works.
Sent from my HTC One X using xda app-developers app
Hello everyone.
In this thread I intend to help people out with a problem identical to or similar to what I mentioned in the title.
If you have for example recovery installed or some files on your sdcard, you can either skip a few steps or restart completely. If you at any point need further assistance, feel free to post (I am not an expert though, I'm just sharing the knowledge I have used to help people out in the past. If I can't help you, I'm sure others can.)
However, this thread assumes you have fastboot and the like in a folder such as C:\android as you would have needed that to unlock the bootloader. Don't fret if you don't, just post and I or others will try to help.
NOTE: In this tutorial I replace the names of files with other words to save writing down every possible file name in existence. Don't type for example blobby.img, type the name of your recovery file that you have downloaded.
STEP 1: Obtain and store clockwork mod recovery touch.
The latest file can be found here if you scroll down to One X (GSM). I recommend you choose this one:
http://www.clockworkmod.com/rommanager
Or if you want the latest one at the time of writing:
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img
Once you have downloaded the file, place it into your folder with fastboot in.
STEP 2: Flash recovery.
First, go to the bootloader on your phone. Highlight and select fastboot.
Then, open comnand promot on your pc.
If you haven't already, plug your phone into the pc.
Now, use the cd command to select your fastboot folder in command prompt. For example, if your folder is C:\android, type:
cd c:\android
Then press enter.
Now to flash the recovery. In this part, the word blobby replaces the recovery file you just downloaded. Type into command prompt:
Fastboot flash recovery blobby.img
Then press enter.
STEP 3: Download ROM, Super wipe and Kernel.
For this I recommend Android Revolution HD as it is in my opinion the fastest and most stable ROM.
http://forum.xda-developers.com/showthread.php?t=1562603
Scroll down to the downloads section and download the ROM itself, the boot. img and the superwipe.zip
Once you have downloaded these, place the ROM and Superwipe in your fastboot folder. Extract the boot zip to a new folder within the android folder.
STEP 4: Put ROM files in your sdcard.
In this next part, blobby means exactly the same as before, rommy means the name of the ROM file you downloaded and wipey means the Superwipe zip.
Go into fastboot on your phone. Open command prompt on the pc and used again to go to your fastboot folder. Type:
Fastboot boot blobby.img
Once in recovery, go to a section called something like mounts and file storage, it's the one with all the mounting and unmounting etc. (Correction needed)
Mount everything, stay in recovery and type in command prompt.
adb push rommy.zip /sdcard
Then
adb push wipey.zip /sdcard
After this is done, return to fastboot for the next step.
STEP 5: Flashing boot image.
Go to the folder you made when extracting the zip before. There should be an executable called something like flash boot. (Correction needed). Open it and follow the instructions.
Once done, go to recovery.
STEP 6: Install ROM.
In recovery, select Install Zip from Sdcard.
Go down until you find the Superwipe zip. Select it.
Do the same for the ROM zip.
Whilst installing the ROM, you will be asked for many settings. I recommend you leave most of them as default, only change what you know changes.
STEP 7: Reboot
Reboot your phone and wait a while. If it starts up, SUCESS. If you still have a problem, post here with more info. Be patient on the first boot, it always takes a while.
I hope this thread has helped you. I am open for all comments good or bad.
Thanks,
ORStoner
is it possible to request a video?
LittleBigTit said:
is it possible to request a video?
Click to expand...
Click to collapse
Which part are you having trouble with?
Would it not be less hassle to just relock and run an RUU?
**********************Custom Splash Screen For LeEco Le Pro 3********************
Bootloader must unlocked, if Not Use Code
Code:
fastboot oem unlock-go
Basic installation Guide for Newbeeeee-
Download extract splash screen pack from Above which is highly compressed in zip file that contain some Custom Boot Logo For Your Device,
Download adb Folder and put splash screen images in adb folder
Now Connect your Phone to PC with usb debugging,
open cmd in adb folder and type bellow Command to boot Device into bootloader
adb reboot bootloader
then type
fastboot devices to Check Device connectivity
then type fastboot flash splash "splash image name here with format"
ex. fastboot flash splash mi.img
the above command will flash mi screen on your Device according above zip,
Done,
Credit-
GokulNC
me:silly:
Downloads-
HERE
XN Logos said:
**********************Custom Splash Screen For LeEco Le Pro 3********************
Bootloader must unlocked, if Not Use Code
Basic installation Guide for Newbeeeee-
Download extract splash screen pack from Above which is highly compressed in zip file that contain some Custom Boot Logo For Your Device,
Download adb Folder and put splash screen images in adb folder
Now Connect your Phone to PC with usb debugging,
open cmd in adb folder and type bellow Command to boot Device into bootloader
adb reboot bootloader
then type
fastboot devices to Check Device connectivity
then type fastboot flash splash "splash image name here with format"
ex. fastboot flash splash mi.img
the above command will flash mi screen on your Device according above zip,
Done,
Credit-
GokulNC
me:silly:
Downloads-
HERE
Click to expand...
Click to collapse
Were you the one to compress the splash screen logos down to our resolution because mine fitted perfectly. I used the apple logo just to get some straight up weird looks at T-mobile Thanks alot +1
Note:
This is not bootanimation, this is the splash screen (the 'Asus' boot logo which is displayed when device is switched ON)
Warning: This is for Asus Zenfone SELFIE Only...
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Asus Zenfone Selfie (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
1. Download & Extract this in your computer: Asus_Zenfone_Selfie_Splash_Logo_Maker.zip
2. Now go into 'pics' folder.. You'll find these images:
Code:
ASUS_logo_HD, batt_crit_FHD, battery_charge, android_FHD, batt_charge_FHD, battery_crit, android_HD, ASUS_logo_FHD
3. Now, you can edit these pictures as you wish..
(To change the bootlogo, you have to edit 'ASUS_logo_HD.png' or 'ASUS_logo_FHD.png')
Warning: Don't change the file names..
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method to install:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Thanks to @afhamz who provided the stock splash.img of Zenfone Selfie ZD551KL..
Hit the Thanks :good: button if it worked for you
You're welcome to share here the custom splash screens that you made, since others may find it useful
Works, Thanks!
Bro can you make a tool for changing splash screen of zenfone 5 ?
I really want to change the stock splash screen with my own creation...
I have attached splash file..please look at it and make tool for my device.
I'm using asus zenfone 5 t00f model.
Thanks in advance.
@GokuINC Bro are you going to provide the tool and the quick tutorial on HOW TO CHANGE ASUS BOOT LOGO IN ZENFONE 5 ?
We really need this tool for our device.
Thanks in advance?
With Regards,
Juyel92
Note:
This is not bootanimation, this is the splash screen (the brand name's boot logo which is displayed when device is switched ON)
This is for ZTE Nubia Z17 Only..
For ZTE Nubia Z17 Mini, click here.
(For other devices, please send me your splash.img so that I can create a tool for you too.)
Requirements:
1. Rooted ZTE Nubia Z17 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this: ZTE_Z17_Splash_Maker.zip
2. Open the 'pics' folder. You will find 'logo.bmp'.
Right-click on it, open it using PhotoShop (or MS Paint), edit it as you wish, and 'Save' it in the same format.
Note: Do not perform "Save As". The picture has to be in the same exact .bmp format (that is, it's an 24-bit depth RGB24 image)
3. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method to install:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Thanks to [email protected] who provided the stock splash.img of ZTE Nubia Z17..
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Thank you very much for sharing it