Related
I found some registry changes to resolve a lot of the bluetooth issues as far as the connection disconnecting after 1 ring, the hangup issue, etc.. HOWEVER.. now I have an issue with LAG where when connected to bluetooth, after a while the phone will lag and you can see everything moving in slow motion.. if I disconnect the bluetooth then the phone speeds back up.. ANY IDEAS? the only device I see this NOT happening with is my STEREO BLUETOOTH HEADPHONES MOTOROLA S9... Here is what I changed:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change DisableReopenAudio to 0 (default is 1)
If anyone can figure out how to resolve the bluetooth LAG I would appreciate it....
anyone have a fix? also now the last received, last called and missed do not grab info from the phone.. it only shows the calls I have made using the bluetooth device...
I have noticed a similar lag, and, on my end it's not so much after a phone call, but after anything associated with BT (I use a Moto HX-1).
Does not do it all the time....If I am in the middle of doing something with the phone, and I get a notification through the ear piece (voice command), everything starts to stutter. Side note, at times, the silly phone heats up, and battery starts to drop.
I reran an OLDER rom for a couple days, and didn't have ONE issue.
Sounds like something in the later rom builds has changed something in the BT?
I've also noticed this recently. Whenever the phone is hooked up to my in-car bluetooth (Audi), it runs like an absolute dog. As soon as it disconnects, it runs fine again. This is most frustrating as it can make the phone unusable when connected to the car kit.
Anyone gotten to the bottom of this yet - is it an issue with a newer bluetooth stack or something?
Hey everyone. Gotta say, i love this phone its the android device i always wanted. However, im having issues with my car bluetooth which i have not experienced before... namely, that random phonecalls sound completely digitized.
Ive come from an htc desire and htc sensation on the same car without issue and am worried i got a bad BT antenna-or its software...
Anyone out there experiencing the same thing? Any advice (other than buying a new car)?
I am having the same issues on a Verizon Galaxy Nexus V4.02. If I turn bluetooth off mid-call the earpiece sounds fine. The static only happens during voice calls, streaming A2DP sounds fine. There are bluetooth improvements listed in the 4.03 changelog, hopefully this will be resolved.
I had some problems with my BT speaker phone. I turned off the key press sounds and the screen off sounds and that pretty much fixed it.
I have an off topic question for you guys that use bluetooth streaming. Can start the car and press play from the HU to start music? I can with my old D2, but not my TB. I have to actually start the music player on the thunderbolt, then I can control it from my HU. I would like to upgrade, but I don't see a huge advantage in upgrading if I still can't start my music without having to actually take the phone out of my pocket. (Yes, I know it's stupid, but I'm lazy.)
I have this same issue in one of my cars. I ran a number of tests and the issue only occurs on my vehicle when the phone is connected to both for telephony and a2dp music. The static occurs whether or not a2dp is actually being used to stream music or not. This particular vehicle has two separate devices for music and telephony. If I unpair or disconnect the music device, then telephony works without the audio distortion. As soon as I reconnect the music device, the static is re-introduced.
v0yeur said:
Hey everyone. Gotta say, i love this phone its the android device i always wanted. However, im having issues with my car bluetooth which i have not experienced before... namely, that random phonecalls sound completely digitized.
Ive come from an htc desire and htc sensation on the same car without issue and am worried i got a bad BT antenna-or its software...
Anyone out there experiencing the same thing? Any advice (other than buying a new car)?
Click to expand...
Click to collapse
I am experiencing this issue as well and have not been able to resolve it. I've tried disabling the touch sounds, screen off sounds, etc. but to no avail.
It pretty much makes handsfree unusable while driving. What have you guys done in the meantime? Have you been able to resolve the issue yet?
Here's my specific details:
Phone: Verizion LTE Galaxy Nexus v4.02 stock/unrooted
Handsfree Car System (phone audio): Stock 2007 Audi A4
Separate A2DP Module (media audio): Dension Gateway Five connected to factory Stereo
All of my previous phones (Thunderbolt, Droid X, Incredible, OG Droid) have fully supported this setup with no issues whatsoever.
On a sidenote, my A2DP streaming is also unreliable. It first has trouble connecting to the device. If/when it does, audio constantly cuts out when streaming Pandora, Slacker Radio, Google Music... pretty much any streaming over network connection. I have not tried locally stored music yet as I don't have any currently stored on my device. Are you guys experiencing this A2DP issue as well?
I wonder how widespread this is and if it warrants opening an official issue with Google.
I used to have a Blackberry Torch, and I have a Ford Mustang. When I would connect the BT to it, if the Wifi was on, it would "interfere" with the signal. Turning wifi off, fixed the issue. This was a widely known issue with the Torch. Granted that shouldn't have to be a fix, but can any of you verify whether your wifi is on? (regardless of if its connected to anything or not). I'm wondering if the Nexus is using the same BT/WIFI chip that the Torch used.
radi0chik said:
I used to have a Blackberry Torch, and I have a Ford Mustang. When I would connect the BT to it, if the Wifi was on, it would "interfere" with the signal. Turning wifi off, fixed the issue. This was a widely known issue with the Torch. Granted that shouldn't have to be a fix, but can any of you verify whether your wifi is on? (regardless of if its connected to anything or not). I'm wondering if the Nexus is using the same BT/WIFI chip that the Torch used.
Click to expand...
Click to collapse
I appreciate the suggestion but unfortunately, I have the issue even if WiFi is off (I never use WiFi).
I'm going to try and toggle a few of the sound and haptic feedback settings a little more to see if it's pertinent to a certain on/off configuration. It's a shot in the dark but I'll try anything at this point.
ok it was worth a shot. Maybe on a whim turn off 3g/data so basically its airplane mode except BT is on? Just to eliminate any RF interference. Other than that I dont know
Spent quite a bit of time in the car today to try and pinpoint a cause and I have had no luck.
Phone audio will sound great and then all of the sudden turn digitized and distorted for a random period of time, then revert back to sounding great. One thing to note is that the distortion is both ways - the person I'm talking to also hears it when I speak and cannot understand what I'm saying. It's very frustrating not being able to use this feature.
I am on my 2nd replacement phone and ALL of them have had this issue (returned two others to VZW due to this issue and the speaker clicking issue). I am still wondering if it is software/OS releated or if it's due to poor hardware.
Quick Update (kind of):
I messed around with more settings last night. I am happy to report that after I disabled NFC last night, I made several handsfree calls in my car with perfect clarity and no issues. Also, A2DP streaming Pandora worked flawlessly! I was happy that I thought I pinpointed the issue - NFC interference.
BUT this morning, I made a handfree call and it was immediately distorted. Frownie face! A2DP Streaming Pandora still worked great. I am now trying to determine if my success last night was a fluke or if something is different with the phone this morning. The only difference from last night to this morning, that I have been able to identify so far, is I now have the extended battery in the phone. Last night's success had the standard battery. I'll switch them back at lunch and re-test.
Stowegy said:
Quick Update (kind of):
I messed around with more settings last night. I am happy to report that after I disabled NFC last night, I made several handsfree calls in my car with perfect clarity and no issues. Also, A2DP streaming Pandora worked flawlessly! I was happy that I thought I pinpointed the issue - NFC interference.
BUT this morning, I made a handfree call and it was immediately distorted. Frownie face! A2DP Streaming Pandora still worked great. I am now trying to determine if my success last night was a fluke or if something is different with the phone this morning. The only difference from last night to this morning, that I have been able to identify so far, is I now have the extended battery in the phone. Last night's success had the standard battery. I'll switch them back at lunch and re-test.
Click to expand...
Click to collapse
I've got the same issue. Even with NFC disabled. Makes listening to Pandora in the car unbearable. I've gone through the same steps as you, but hasn't exchanged the phone yet. I've had previous Androids and it was a hit/miss with the distortion, but with an iPhone or BB never had this issue. Go figure.
thanks to all the replies, will update to 4.0.3 and try out some more options.
- unplugging my music dongle had no effect on call quality
- NFC on or off had no effect
I also find that the music adapter never auto-connects and needs me to go in to the BT settings page and manually select it.
thanks all.
Hello again. So I have an update that adds to the flakiness ...
Updated to the Bugless Beast ROM and Franco's kernel. My intent was to completely reset the phone and hopefully get a new Bluetooth stack in the process.
Initially everything paired OK, but after a while my audio randomly disconnects after about 20minutes and then reconnects depending on its mood.
My phone connection is more controllable now: if the BT is enabled on my phone when I turn on the car, the sound quality is entirely digitized and unusable. If I turn on the car and THEN enable my phone, the sound quality is flawless every time.
Still not ideal, but manageable. For the music audio part, I lay the blame entirely on the Audi Music Interface BT adapter: the thing is crap and always in pair mode even with the car turned off! The telephone BT in the car head unit has seen several phones pair with it without any issues (I do mobile development so I get to play with many phones) so in that case, I can't blame anything but the Nexus.
I really hope someone at Google or Samsung reads these threads since it would be tough to troubleshoot, but there's no doubt an issue exists with general BT compatibility.
Sent from my Galaxy Nexus using xda premium
Anyone have an update on this issue? Does anyone know of a ROM with a different Bluetooth stack than AOKP? I love everything else about AOKP. I have had the same garbled bluetooth audio from stock - 4.03 with franco and faux kernels with the same result. I had similar problems with Cyanogen 7 ROM I was using on my Incredible the week before I bought the Nexus.
Update - I experimented with a couple of additional devices, and the multiple connections problem with my Nexus is limited to A2DP only devices.
I am now using a Garmin BlueTrip with "phone audio" deselected in bluetooth options. As long as the additional bluetooth device is handsfree profile capable, the A2DP functions perfectly, calls are clear, and the device reconnects after a power cycle consistently. I'm glad this appears to be a software issue and not something we will have to live with for the life of the phone. I'm sure a future update will correct this issue.
I'm also having a problem with Bluetooth calls sounding very digitized and/or choppy. It is bad enough that it can be extremely difficult to make out what the caller is saying. A2DP, on the other hand, has performed pretty flawlessly and the device consistently reconnects each time I get in the car (although it can take up to 30 seconds or so).
I'll have to do a little experimenting with some of the settings mentioned in this thread to see if they have any affect.
On a related note, I feel like sometimes calls made/recieved on the handset can sound digitized as well (although not nearly as bad as over bluetooth). Has anyone else experienced this?
My hardware is:
Verizon GNex (4.0.2)
Parrot MKi9000
My issue today is that my bluetooth will not pair properly and remember its configurations. My initial pairing on my phone with my car's flexsmart X3 works perfect, however when I turn off my bluetooth on the phone or turn off my car and turn it back on the phone will still see the flexsmart and it will say it is paired but I get no sound. Upon further investigating I find that in the options setting that neither the call nor music tick box is checked. If I try to tick them it will think for a few seconds and then gray out and do nothing again.
I never had a problem with my note 2 or my temp replacement evo 3d remembering these settings. All I would do with those phones was pair it once and then any time I hopped in the car I would just turn onm,y phone's bluetooth and go. Now with my note 4 I have to unpair and repair the devices each and every time which is a huge pain.
I have read a little bit that this is due to samsung note 4 using a newer bluetooth standard than its predecessors. Is there anyway to circumvent this issue by maybe rolling back the bluetooth drivers or something? I even thought about creating a tasker profile to help with this but still I would have to physically press the search button on the flexsmart eachtime.
Any and all suggestions would be great. Also right now I am on rooted stock 5.0.1
PS: I will try and post some photos to help when I get the chance to get to my car.
I've been start for a solution to this since the phone came out as well. I have the same Bluetooth issues with my phone in my car. Nothing more annoying than having to turn Bluetooth on and off for 10-15 minutes of your drive before you can use the damn thing. Oh wait, more annoying would be when it's been working for a solid 45 minutes or so and then suddenly, with no warning, the Bluetooth connection ends for no reason and your cars stereo comes on instead of what you were streaming only the volume on the cars radio is far louder and it scares the ever living crap out of you
flyhighx said:
I've been start for a solution to this since the phone came out as well. I have the same Bluetooth issues with my phone in my car. Nothing more annoying than having to turn Bluetooth on and off for 10-15 minutes of your drive before you can use the damn thing. Oh wait, more annoying would be when it's been working for a solid 45 minutes or so and then suddenly, with no warning, the Bluetooth connection ends for no reason and your cars stereo comes on instead of what you were streaming only the volume on the cars radio is far louder and it scares the ever living crap out of you
Click to expand...
Click to collapse
Odd....I dont seem to have that issue. Once I have initially paired the bluetooth it will stay connected without any interruptions. Also pairing for me is really fast and only takes a minute or so. My problem is that instead of my phone remembering the current device settings that it is paired with, it will forget to associate it with calls and data after I turn the bluetooth off and then later back on even though the phone will still remember it is paired with the car bluetooth.
First world problems I know but it gets a tad annoying having to unpair and repair my phone each and everytime I hop in my car to go somewhere if I want to listen to my music.
In the car I don't get a lot of skipping. But when connected to my BT speakers audio does skip a lot and starts playing in ffw then disconnects completely. It's driving me nuts. I've tried all the usual trouble shooting also. No help. Wtf Samsung/Google
Anyone else having issues with connecting the 7T to their car and getting audio going out of it? My OG Pixel didn't have a problem, but I have to toggle off/toggle on Bluetooth and then manually tap the car's bluetooth listing to get it to actually 'connect' the audio portion.
Rather annoying, considering I'm only in the car for a few minutes at a time, this either eats into the time entirely, or makes me sit in my car for a couple minutes before even driving to fiddle with the bluetooth settings.
Car has stock headunit, 2015 Evo X. Like I said, original Pixel XL had no issues, but this is annoying. I've tried changing bluetooth versions to no avail. I can see it connecting and dropping the bluetooth connection fairly frequently while staring at it and trying to 'get it going'. But once it connects, it stays there.
My bluetooth headphones (Some knock off cheap Chinese ones for $20) don't seem to have an issue.
My connection to my aftermarket stereo is fine. Just seems a little quieter than my last phone. Connecting is kind of slow too when I start my car but it is automatic.
I don't have any issues with connecting to all 3 cars (2014 Honda Accord, 2009 Pontiac G8 Gt and a 2018 Honda Fit) but I do agree that the volume seems a little lower than my previous phone (Galaxy S8).
Sent from my [device_name] using XDA-Developers Legacy app
Hmm. Weird. Is there anyway I can check for logs to find out what exactly is happening? I haven't rooted, just don't know if it's something I can naturally pull from Android as a whole.
I had the same issue, but when I made the phone discoverable and initiated bt from the car stereo it seemed to work.
I also set a custom pin , not the default 0000
My bluetooth is quiet, but its also static-y. I never had any issues with my G6 and now I get static clipping every 10 or so seconds. Its unbearable.
jagadeesh16 said:
I had the same issue, but when I made the phone discoverable and initiated bt from the car stereo it seemed to work.
I also set a custom pin , not the default 0000
Click to expand...
Click to collapse
I'm not really having an issue pairing it, but it's just connecting after pairing is the problem.
I have changed the default pin. I can see it popping up and down the car stereo a few times in the bluetooth settings before it just gives up.
As for the other issues, I'm not having a problem at all with audio volume, nor popping/static when it finally does connect.
My volume is super low when connected to Android Auto and streaming music. Have to turn the radio up to max. However, I'm assuming that's an AA issue or Android issue, as it seems many others are having the same problem with different phones. Been thinking of adding an aftermarket amp to the car. Maybe I should pull the trigger. Lol
Phreak411 said:
My volume is super low when connected to Android Auto and streaming music. Have to turn the radio up to max. However, I'm assuming that's an AA issue or Android issue, as it seems many others are having the same problem with different phones. Been thinking of adding an aftermarket amp to the car. Maybe I should pull the trigger. Lol
Click to expand...
Click to collapse
Be careful that a bugfix doesn't come and blow your eardrums out, lol.
Milkshakes00 said:
Be careful that a bugfix doesn't come and blow your eardrums out, lol.
Click to expand...
Click to collapse
LOL that would be my luck
.
My OnePlus 7t connects fine and phone works for calls on 2014 cts. The sound comes out of phone can change song on head unit but I can't get audio to play through car. Anyone else get this?
Yeah music stutters with car player... Only calls work. Music works on headphones etc. I couldn't find solution, did network reset, cleared cache. Nothing works.
Seriously!
I've wasted at least two hours already trying all the recommended steps: from flicking icons on and off to a full phone reset.
Still no connection to my Suzuki S-cross car. Multiple previous phones have connected effortlessly.
Even the $50 temporary five year old borrowed phone could handle it.
Anyone got any other suggestions? Yes, tried the AVRCP setting change from 1.4 to 1.6. That didn't work either...
Barebones system reset from scratch running O2 OS 10.0.6HD65AA
Any suggestions greatly appreciated.
I need to be able to talk and drive!
Reset the car radio and clear all pairing data if you can. Then try again.
autosurgeon said:
Reset the car radio and clear all pairing data if you can. Then try again.
Click to expand...
Click to collapse
Thanks for the suggestion.
Tried that.
Tried one other car - no problems.
Tried a tablet and a very old phone with the car and suprise - the car's bluetooth seems to be the problem.
I will try and find out if I can fix the car!
UPDATE: Morale of the story - read the car manual very very carefully and go though each tedious step = SUCCESS
mikefnz said:
Thanks for the suggestion.
Tried that.
Tried one other car - no problems.
Tried a tablet and a very old phone with the car and suprise - the car's bluetooth seems to be the problem.
I will try and find out if I can fix the car!
UPDATE: Morale of the story - read the car manual very very carefully and go though each tedious step = SUCCESS
Click to expand...
Click to collapse
Yep most have lots of tedious steps that are different model to model and if not followed exactly will cause this problem on occasion..
In my case music starts to be scrambled after 10 minutes or so of listening. When I take the phone (so the watch pops up) or turn on the screen it immediately works fine again, but when being put aside and the screen turns off, the issue starts again ..
Also in the early days of my previous 5t I had the same issues but some fix was delivered together with oxygen os update. And now the same story again
I have a different issue with Bluetooth:
- OP7T connects to car Bluetooth fine
- I can make/answer calls
- Bluetooth media works fine
The problem is with Google Assistant & car audio:
- it was working as intended until the latest update - 10.0.15 - I was pressing the button on the steering wheel the google assistant was answering questions through the car bluetooth, no need to switch to bluetooth media.
- after the latest update, when I press the button on the steering wheel, Google assistant pops on the phone , starts to answer question, but cuts off after 5 seconds. the command still goes through and Assistant still runs, but does not come up on the car audio.
- it looks like the Assistant is not connecting to the car as a hands free, but as to a bluetooth handsets.
Anyone experiencing this?
Helloe
As of recently, something weird is happening with my Bluetooth connection with my car's audio.
After connecting, I try to play music but I cannot hear it in the car despite turning up rhe volume on the car and phone.
A setting within the BT's advanced settings is greyed out, and I ask if that is the culprit. See pic.
If so, how do I change that?
It worked fine 2 weeks ago.
My daughter's phone plays fine, so BT works fine in the car's audio.
Thank you