Hi,
I have my car audio system with winCE.
I wish to check if there is a firmware update to it and to update my Bluetooth driver.
So can you explain to me what I am reading as hardware specifications (specs are below) and tell me if there is any update and where I can find it.
Thank you.
OS: CE6.0_ Build 0
Platform: MT33XX
OEM Info: MT3360_CE60_W1350_74444
Processor Name: mt33XX
Processor Core: ARM1176 JZF-S
Processor Make: MediaTek
Processor Speed: 756
Total Memory: 139.77MB.
Memory Load: 36%
Available Memory: 89.61MB
Total Virtual: 102.00MB
Available Virtual: 1022.88MB
PageSize: 4096b
Total Pages: 35780
Free Pages: 22939
Thank you.
Related
:? Dear All
Hope this message reaches you'll in good health and best of spirits.
I am new to this forum, so please help me.
After upgrading to WM2005 and after installing Hima DOC Tools v1.0, My O2 Xda II has become slow and my Storage Memory has decreased from 32.00 MB to 7.40 MB. When I install any program and / or put any Data in the Main Memory in place of Storage Card (SD Card), it reduces the Storage Memory, I thought the Program Memory usually reduces instead of Storage Memory.
Please clarify my doubts and if there is any procedure to increase the Storage Memory to 32.00 MB or default of 64 MB, please explain how to do it in simple manner, since I am just an end user, will not understand technical language.
The details of my o2 Xda II after upgrading to WM 2005 is :
VERSION
-------
ROM Version: 1.60b.96WWE
ROM date: 04/22/05
Radio Version: 1.18.00
Protocol Version: 1337.38
HARDWARE
--------
CPU: Intel(R) PXA263
Speed: 400 MHz.
RAM Size: 128 MB
Flash Size: 32 MB
Flash Chip Type: 28F128K3
Data Bus: 32 Bits
Storage Size: 30.53 MB
LCD: 240 x 320 TFT
Colors: 65536
IDENTITY
--------
Model No. PH10B
Platform: Pocket PC
I once again request you to help me.
Best Wishes
Dineshchand Nahar
Hi everyone,
I recently purchased a chinese tablet. I've been trying to update the ROM or at least get a more stable version on it since I constantly get the android.process.acore has stopped error.
I installed Quadrante advanced and this is the system information I got:
System
SDK version: 4.0.4
ID: IMM76D
OS name: Linux
OS version: 3.0.8
Dalvik VM version: 1.6.0
Device
Model: A10_T907_CPU:1.5GHz
Product: crane_dds_t907
Board: crane
Brand: softwinners
Fingerprint: softwinners/crane_dds_t907/crane-dds-t907:4.0.4/IMM76D/20120626:eng/test-keys
CPU
Name: ARMv7 Processor rev 2 (v7l)
Current Freq.: 1008 MHz
Max Freq.: 1008 MHz
Min freq.: 60 MHz
Cores: 1
Cores available to Java: 1
Architecture: 7
BogoMIPS: 1001.88
hardware: sun4i
Revision: 2
Serial #: 0a40a496514848488071825316236791
Memory
Total: 833800 kB
Free: 414648 kB
Inactive: 176388 kB
I found a URL for my tablet. Unfortunately I'm unable to post External URLs since I am a newbie.
I would really appreciate any help towards flashing and adding a new ROM to this tablet. I know that it is rooted because I ran RootChecker and everything seems to be ok.
Could anybody please, please help me figure out what ROM could I use to fix some of the issues I have with it?
Thanks!!
I have a 10.1" touch panel with following specs. this is to use with KNX visualization. however the app that I am using doesnt support android 4.2.2 version, I need to upgrade this touch panel any higher version.
any suggestions appreciated.
Cpu : ARM® Cortex?-A7 Dual-Core 2 x 1.2 GHz
Memory : Min 1 GB DDR3
Storage : Min 8 GB with EMMC (sandisk) disc technology
OS : Android 4.2.2 / Linux (Debian / Ubuntu / Fedora / Linaro )
USB : 2x USB-HOST with USB2.0 spec, 1xUSB-OTG
RTC : System includes RTC with CR1220 battery
SDCard : Standard SD-TF card connector up to 64Gbyte storage
Ethernet : 100Mbps
I have installed the latest Bliss OS 10.0 beta to my computer using the android-x86 installer from the developers. After it finished it said that the installation was successful. When I try to boot into Bliss OS though it stops after
"detecting Android_x86 . . . found on /dev/sda4
Android-x86_64:/# "
it allows me to type some minimal commands but will not boot to Bliss OS. I have no idea what to do. Here are some specs of my laptop.
Machine name: DESKTOP-T1R6H4T
Machine Id: {CB81229F-8457-413F-A7A3-679CEB484FCF}
Operating System: Windows 10 Home 64-bit (10.0, Build 16299) (16299.rs3_release.170928-1534)
System Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
System Model: 305E4A/305E5A/305E7A
BIOS: 00TL.MI22.20120511.SKK
Processor: AMD A6-3420M APU with Radeon(tm) HD Graphics (4 CPUs), ~1.5GHz
Memory: 4096MB RAM
Available OS Memory: 3564MB RAM
Page File: 2317MB used, 2590MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Not Available
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.16299.0015 64bit Unicode
Card name: AMD Radeon HD 6520G
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x9647)
DAC type: Internal DAC(400MHz)
Device Type: Full Device
Device Key: Enum\PCI\VEN_1002&DEV_9647&SUBSYS_C624144D&REV_00
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 2035 MB
Dedicated Memory: 499 MB
Shared Memory: 1536 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
HDR Support: Not Supported
I'm having the same problem. Did you ever get it to work?
Same problem
I have some problem.
My laptop is Lenovo 110-14ast AMD A9 wtih 4gb ram.
I was installed android x86, remix os, and now Bliss os but all os cant boot to android , stuck on logo (remix) or terminal before logo. ~androidx86#
Also i was installed on virtual machine gnu/linux but cant boot..
Very2 sadly with this..:crying::crying:
these are usually issues related to the kernel. try a build with a different kernel
Hey so I'm fairly new to the development game and so far I've had success with most of the things I've found interest in. But I am having trouble with what I would like to accomplish most. I would really like to root my Galaxy note 8. It's my daily driver and I'd kill for root access. The issue that I'm running into is the only root method for my Verizon Galaxy note 8 is SamFails root method but it's only good for bootloader versions 1-3. My bootloader version is currently sitting at v5 from what I understand. Here's my phone's specs.
System
OS
Version: Oreo 8.0.0
Security patch: 01 February 2019
Build number: R16NW
Tags: release-keys
Bootloader: N950USQS5CSA1
SDK: 26
Font scale: Normal
Time zone: Central Standard Time
Uptime: 01:37:49
Uptime (w/o Deep Sleep): 01:36:59
Radio: N950USQS5CSA1
Miscellaneous
Virtual machine: ART 2.1.0
Version Java Runtime: Android Runtime 0.9
Heap size: 256 MB
SELinux: Permissive
Root: Unavailable
BusyBox: Unavailable
Version ICU: 9.0
Library ICU: 58.2
ICU CLDR: 30.0.3
Version ZLib: null
Version OpenSSL: OpenSSL 1.0.2 (compatible; BoringSSL)
Google Play Services: 15.0.90 (040400-231259764)
Kernel: 4.4.78-14375742
Fingerprint: samsung/greatqltesq/greatqlte:8.0.0/R16NW/N950USQS5CSA1:user/release-keys
Device
Model: SM-N950U
Codename: greatqlte
Manufacturer: samsung
Fingerprint scanner: Present
Display
Type: N/A
Resolution: 2220 x 1080
Frame rate: 60.000004 Hz
Density: 420 dp
Format: N/A
sRGB: Not supported
HDR: Not supported
HDR
Type: HDR10
Average luminance: 200.0
Maximum luminance: 540.0
Minimum luminance: 0.2
Identifiers
Processor
CPU
Model: Qualcomm MSM8998
Name: Snapdragon 835
Architecture: Kyro 280
DSP: Hexagon 682
Process: 10 nm
Cores: 8
Supported ABI: armeabi-v7a armeabi arm64-v8a
Governor: interactive
Frequency range: 300 MHz - 1900 MHz
Usage: 100 %
Based off that info is there anything that I can do to possibly change the bootloader version to 1-3? Please I've done what research I could do with the knowledge that I've obtained thus far and I'm stuck.
So by research did you look through the various threads here regarding rooting?
Kidd kuddi said:
Hey so I'm fairly new to the development game and so far I've had success with most of the things I've found interest in. But I am having trouble with what I would like to accomplish most. I would really like to root my Galaxy note 8. It's my daily driver and I'd kill for root access. The issue that I'm running into is the only root method for my Verizon Galaxy note 8 is SamFails root method but it's only good for bootloader versions 1-3. My bootloader version is currently sitting at v5 from what I understand. Here's my phone's specs.
System
OS
Version: Oreo 8.0.0
Security patch: 01 February 2019
Build number: R16NW
Tags: release-keys
Bootloader: N950USQS5CSA1
SDK: 26
Font scale: Normal
Time zone: Central Standard Time
Uptime: 01:37:49
Uptime (w/o Deep Sleep): 01:36:59
Radio: N950USQS5CSA1
Miscellaneous
Virtual machine: ART 2.1.0
Version Java Runtime: Android Runtime 0.9
Heap size: 256 MB
SELinux: Permissive
Root: Unavailable
BusyBox: Unavailable
Version ICU: 9.0
Library ICU: 58.2
ICU CLDR: 30.0.3
Version ZLib: null
Version OpenSSL: OpenSSL 1.0.2 (compatible; BoringSSL)
Google Play Services: 15.0.90 (040400-231259764)
Kernel: 4.4.78-14375742
Fingerprint: samsung/greatqltesq/greatqlte:8.0.0/R16NW/N950USQS5CSA1:user/release-keys
Device
Model: SM-N950U
Codename: greatqlte
Manufacturer: samsung
Fingerprint scanner: Present
Display
Type: N/A
Resolution: 2220 x 1080
Frame rate: 60.000004 Hz
Density: 420 dp
Format: N/A
sRGB: Not supported
HDR: Not supported
HDR
Type: HDR10
Average luminance: 200.0
Maximum luminance: 540.0
Minimum luminance: 0.2
Identifiers
Processor
CPU
Model: Qualcomm MSM8998
Name: Snapdragon 835
Architecture: Kyro 280
DSP: Hexagon 682
Process: 10 nm
Cores: 8
Supported ABI: armeabi-v7a armeabi arm64-v8a
Governor: interactive
Frequency range: 300 MHz - 1900 MHz
Usage: 100 %
Based off that info is there anything that I can do to possibly change the bootloader version to 1-3? Please I've done what research I could do with the knowledge that I've obtained thus far and I'm stuck.
Click to expand...
Click to collapse
You're on bootloader version 5 and there's nothing you can do because there's no possibility of downgrading your bootloader version back to 1 - 3 and there's no root available at this point in time.