Related
Unable to unlock UBL its nearly 6months, i've wait and doing alot of search and trials..and still nothing?!!!
Edit#
See newer post hope you can also fix the problems, thanks a TON for our Rusians community 4Pda..
The problems solved, nom i'm abble to unlock my devices (Mi 5s). gor everyone bought the secondhand units, beware this problems might comes to you.
and this method may also posible to work on any Xiaomi devices, please report if this method works on any other devices,so it can help more people with the same problems.
*What i've done on my capricorn, loging out the MID,enabling oem-unlock before flash.
1. latest global developer fastboot rom.
2.extract the rom.
Browse and find the "rawprogram.xml"
Use notepad++ to editing the line add "persist.img" on the line.. check the sparse value check it's set as true.
3. Use miflash to flash the rom,enter edl mode with testpoint ...wait till flashing done ..settup the phone (don't know if its the matter, i finished the settup without sim, use wi-fi)
Signing in enabling developer mode and miunlock status bind the account and done, just wait some times to get approved.
I'm also facing this problem in adding account to bootloader status page , says :- can't add ,error code 20091
vipul koserwal said:
I'm also facing this problem in adding account to bootloader status page , says :- can't add ,error code 20091
Click to expand...
Click to collapse
Which devicea you're using right now??
SH1M4BD3 said:
Which devicea you're using right now??
Click to expand...
Click to collapse
I'm using redmi 5a 16gb
SH1M4BD3 said:
Unable to unlock UBL its nearly 6months, i've wait and doing aloylt of search..and still nothing?!!!
Click to expand...
Click to collapse
Try to refresh persist.img through MiFlash, I did it. I made a short instruction in the Russian forum, but I do not have the opportunity to insert a link here.
werty06 said:
Try to refresh persist.img through MiFlash, I did it. I made a short instruction in the Russian forum, but I do not have the opportunity to insert a link here.
Click to expand...
Click to collapse
and that solving the issue in this cases?
helped me. before that I tried many ways that did not work on my mi 5. at the time of unlocking the phone through the test point mode, the firmware was downgraded from miui 10 to miui 8. (which did not help) then I left the account and requested persist.img. after which the phone immediately became attached to the account, and later the miUnlock program was unlocked immediately (without waiting, the account I had since the first versions of miui)
werty06 said:
helped me. before that I tried many ways that did not work on my mi 5. at the time of unlocking the phone through the test point mode, the firmware was downgraded from miui 10 to miui 8. (which did not help) then I left the account and requested persist.img. after which the phone immediately became attached to the account, and later the miUnlock program was unlocked immediately (without waiting, the account I had since the first versions of miui)
Click to expand...
Click to collapse
share me the link pls
werty06 said:
Try to refresh persist.img through MiFlash, I did it. I made a short instruction in the Russian forum, but I do not have the opportunity to insert a link here.
Click to expand...
Click to collapse
I also looked through the tutorial on persist but i can not load ROM by MIFLASH, it error "flash xbl error"
werty06 said:
Try to refresh persist.img through MiFlash, I did it. I made a short instruction in the Russian forum, but I do not have the opportunity to insert a link here.
Click to expand...
Click to collapse
Is this the link? https://4pda.ru/forum/index.php?showtopic=721838&st=27140#entry77015183
SOlVED use the Translation to read the given page above,Tested,Binding MID success..Thanks guys rally love you all of you, now i have to wait 72H to unlock will give it update when its done..one again Thankyou
SH1M4BD3 said:
SOlVED use the Translation to read the given page above,Tested,Binding MID success..Thanks guys rally love you all of you, now i have to wait 72H to unlock will give it update when its done..one again Thankyou
Click to expand...
Click to collapse
Hey, how about "flash xbl error"
By Tũn said:
Hey, how about "flash xbl error"
Click to expand...
Click to collapse
Which specific devices??
This what i've done on my capricorn, loging out the mid,enabling oem-unlock before flash.
Download latest global developer fastboot rom,extract the rom.
Browse and find the rawprogram.xml
Use notepad++ to editing the line "adding persist.img on the line.. check the sparse valeu make it sure its true.
Use miflash to flash the rom,enterk gedl mode with testpoint ...wait till flashing done ..settup the phone (don't know if its the matter, i finished the settup without sim, use wi-fi)
Signing in enabling developer mode and miunlock status bind the account and done
SH1M4BD3 said:
Which specific devices??
This what i've done on my capricorn, loging out the mid,enabling oem-unlock before flash.
Download latest global developer fastboot rom,extract the rom.
Browse and find the rawprogram.xml
Use notepad++ to editing the line "adding persist.img on the line.. check the sparse valeu make it sure its true.
Use miflash to flash the rom,enterk gedl mode with testpoint ...wait till flashing done ..settup the phone (don't know if its the matter, i finished the settup without sim, use wi-fi)
Signing in enabling developer mode and miunlock status bind the account and done
Click to expand...
Click to collapse
My device is mi5s ( locked bootloader )
I also edited the persist file in rawprogram.xml but when flash by miflash it shows "flash xbl error", i am using ROM GLOBAL STABLE MIUI 9.6
thank you
Can you tell me ewhich mi-flash version you're used?? An d to maje it simple please download the developer version use the latest one 8.10.11
And about mi flash i used the Beta one don't know excatly which version as i aready downloaded and install it about 5-7monts back from now.
And the attached xml file of mine.
You can just copy it inside the extracted fastboot rom,and makesure to replace the files
SH1M4BD3 said:
Can you tell me ewhich mi-flash version you're used?? An d to maje it simple please download the developer version use the latest one 8.10.11
And about mi flash i used the Beta one don't know excatly which version as i aready downloaded and install it about 5-7monts back from now.
And the attached xml file of mine.
You can just copy it inside the extracted fastboot rom,and makesure to replace the files
Click to expand...
Click to collapse
i use miflash newest.... but you are using global beta 8.10.11 ??? and you check testpoint to edl mode then miflash ?
Yup i use miui 10 8.10.11, yess just use your own miflash version,let see if its work, yes you need to open the backdoor just see on youtube and hit the test point to entering edl mode sir, hope you luck..
SH1M4BD3 said:
Yup i use miui 10 8.10.11, yess just use your own miflash version,let see if its work, yes you need to open the backdoor just see on youtube and hit the test point to entering edl mode sir, hope you luck..
Click to expand...
Click to collapse
Oke i will try you can sent me your facebook ??? i want to learn and ask something about mi5s .... tks
By Tũn said:
Oke i will try you can sent me your facebook ??? i want to learn and ask something about mi5s .... tks
Click to expand...
Click to collapse
I never use facebook @shimabdi my telegram reach me out there
See successfuly unlocked,and flashed LOS about a week now. and i've sold my beryllium and back grabb my old capeicorn, thanks for such a great help here..
i have literally searched everywhere and tried the methods but to no avail. There are some old methods but they dont work anymore.
i cant access recovery but i can access fastboot but since my bootloader is locked, i guess thats no use.
1. Official flash wont work because not a authorised mi account (if someone have this, please for love of god help a brother out).
2.Tried the famous anti test https://www.youtube.com/watch?v=Pf_pPCGkldI&app=desktop but stuck at "ACK count dont match" and i guess others have this issue too. Do anyone know what this error mean in first place?
service center guys is waiting to rip off money with new motherboard but there must be someone somewhere who have good knowledge about and tweak something to make it work.
tl;dr: please provide a working unbricking method for RN5pro (working in 2020)
Hey bro as u can access fastboot mode, can u unlock ur bootloader via unlock tool?
binarygod1299 said:
i have literally searched everywhere and tried the methods but to no avail. There are some old methods but they dont work anymore.
i cant access recovery but i can access fastboot but since my bootloader is locked, i guess thats no use.
1. Official flash wont work because not a authorised mi account (if someone have this, please for love of god help a brother out).
2.Tried the famous anti test
&app=desktop but stuck at "ACK count dont match" and i guess others have this issue too. Do anyone know what this error mean in first place?
service center guys is waiting to rip off money with new motherboard but there must be someone somewhere who have good knowledge about and tweak something to make it work.
tl;dr: please provide a working unbricking method for RN5pro (working in 2020)
Click to expand...
Click to collapse
Bro i also need this solution , please help me ??
---------- Post added at 09:07 AM ---------- Previous post was at 09:06 AM ----------
Sidgup1998 said:
Hey bro as u can access fastboot mode, can u unlock ur bootloader via unlock tool?
Click to expand...
Click to collapse
I can't because for this we should enable usb debugging and oem unlock from the settings , but how we can do that if mobile is stuck at mi logo ??
udaymaurya said:
Bro i also need this solution , please help me ??
---------- Post added at 09:07 AM ---------- Previous post was at 09:06 AM ----------
I can't because for this we should enable usb debugging and oem unlock from the settings , but how we can do that if mobile is stuck at mi logo ??
Click to expand...
Click to collapse
Actually i didn't do anything u mentioned to unlock my bootloader, u can give it a try
Sidgup1998 said:
Hey bro as u can access fastboot mode, can u unlock ur bootloader via unlock tool?
Click to expand...
Click to collapse
No, you cant do that. You need to set in developler settings first but since the phone is stuck, you can't do it which means you can't unlock bootloader now using miunlock. if this was possible, we wont be whacking brains in edl n stuffs.
source: i have tried it already n didnt work.
binarygod1299 said:
No, you cant do that. You need to set in developler settings first but since the phone is stuck, you can't do it which means you can't unlock bootloader now using miunlock. if this was possible, we wont be whacking brains in edl n stuffs.
source: i have tried it already n didnt work.
Click to expand...
Click to collapse
Good luck
Download latest MIUI fastboot ROM and flash it
simple.. and use anti test patch.. search on xda.
Good luck.
drnightshadow said:
Download latest MIUI fastboot ROM and flash it
simple.. and use anti test patch.. search on xda.
Good luck.
Click to expand...
Click to collapse
neither the anti test rom nor the anti test patch is working now. it used to work before. ppl getting the "ack count dnt match error" or simply other error. maybe xiaomi patched something .
binarygod1299 said:
neither the anti test rom nor the anti test patch is working now. it used to work before. ppl getting the "ack count dnt match error" or simply other error. maybe xiaomi patched something .
Click to expand...
Click to collapse
No no, if you get ack error you just need to power cycle the phone (hold power button for 20-30 sec).
Really easy just need to be patient and retry.
Trust me I done it last week on my friends phone.
Just don't give up.. take a break and try it again. I done it in 3rd try. And use patched firehouse file on original MIUI fastboot rom.
Good luck!
drnightshadow said:
No no, if you get ack error you just need to power cycle the phone (hold power button for 20-30 sec).
Really easy just need to be patient and retry.
Trust me I done it last week on my friends phone.
Just don't give up.. take a break and try it again. I done it in 3rd try. And use patched firehouse file on original MIUI fastboot rom.
Good luck!
Click to expand...
Click to collapse
may i ask which ph model did u fix?
also which version of mi flash di you use? di you open case n did test point method?
binarygod1299 said:
may i ask which ph model did u fix?
also which version of mi flash di you use? di you open case n did test point method?
Click to expand...
Click to collapse
1. It was global model
2. mi flash 2018
3. Not needed, as i could access to fastboot.
binarygod1299 said:
may i ask which ph model did u fix?
also which version of mi flash di you use? di you open case n did test point method?
Click to expand...
Click to collapse
I don't know if this help, I unlocked many Xiaomi devices and it usually takes a lot of wait time but I bought a RN5 Pro from second hand and when I tried to unlock it through Mi-Unlock Tool it did it instantly so it looks like Xiaomi don't care anymore for bothering on old devices, just in case you didn't try it previously.
Also it may help some screenshot as possible of your issue from the Mi Flash tool, I always used the Mi Flash tool Pro for unbrick purposes https://xiaomifirmware.com/downloads/miflashpro/ Have present that a device in this state is highly unresponsive so you have to try it a lot of times to get it working again changing always some things around.
Unlocked a Note 3 bricked like that back in the day using the EDL mode with MiFlash. Just a tip, don't know whether that'll work here.
Another tip: Don't buy any more Xiaomi devices.
Limetak said:
Unlocked a Note 3 bricked like that back in the day using the EDL mode with MiFlash. Just a tip, don't know whether that'll work here.
Another tip: Don't buy any more Xiaomi devices.
Click to expand...
Click to collapse
Yeahh Xiaomi's edl authentication is bull****.
Locked edl flashing (which they thought was a security measure) but they bundle miui with full of crap and data miners.
binarygod1299 said:
neither the anti test rom nor the anti test patch is working now. it used to work before. ppl getting the "ack count dnt match error" or simply other error. maybe xiaomi patched something .
Click to expand...
Click to collapse
did you manage to solve it? I am in your same condition! I can go to fastboot mode, edl but cannot flash anything neither with QFIL or MIFLASH same error ACK COUNT DONT MATCH Or Sahara Server connection! I am really desperate and disappointed!
supermike23 said:
did you manage to solve it? I am in your same condition! I can go to fastboot mode, edl but cannot flash anything neither with QFIL or MIFLASH same error ACK COUNT DONT MATCH Or Sahara Server connection! I am really desperate and disappointed!
Click to expand...
Click to collapse
Did you disconnect battery?? If not, do it and try again.
And try even with disconnect battery and try EDL.
Good luck!
drnightshadow said:
Did you disconnect battery?? If not, do it and try again.
And try even with disconnect battery and try EDL.
Good luck!
Click to expand...
Click to collapse
Yes I tried everything even miflash pro and miflash 2018, miflash 2017 and flashing old rom both global or china mode with or without the new ssd660.elf files or patchprogram etc. I tried with connected battery and no battery in EDL mode and nothing is working just error of ACK COUNT COULDN'T MATCH cannot flash anything even with QFIL di qualcomm such a shame for Xiaomi! I think EMMC is corrupted then. Can't think of any other reason!
How did you solve the issue now in 2021?
What did you do?
Was the phone only able to go to fastboot and edl mode or also recovery? Cause mine only MI LOGO, fastboot and EDL mode with locked bootloader and EDL mode only via test point with open back cover!
Thanks
ACK COUNT COULDN'T MATCH this warning is linked to a synchronization attempt between programming Computer and interface controller the data transfer rate needs to be HIGHER than normal USB serial link transfer rate it seems.
arpit.exe said:
ACK COUNT COULDN'T MATCH this warning is linked to a synchronization attempt between programming Computer and interface controller the data transfer rate needs to be HIGHER than normal USB serial link transfer rate it seems.
Click to expand...
Click to collapse
the bootloader needs to be unlocked first remember the WHYRED is an android device all android devices are based on linux kernel the flashing computer OS must have a core ADB support and linux terminal and a linux kernel to complete the job
I need help i tried flashing fastboot ROM with MIUI tool and now its stuck in bootloop also cant access bootloader
Hi, can I flash MIUI ROM which has this in flash_all.bat:
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
when my current ROM after running "fastboot getvar anti" returns 1?
Will MiFlash prevent me from bricking Redmi Note 8 Pro with returning an error because of anti rollback?
P.S.: If I download my current rom in fastboot version there is also CURRENT_ANTI_VER=0 so I truly do not understand why it returns 1 after that command.
When I tried to use MIFlash to do this, it just returned an error without bricking the device.
However, I bricked my RN8P anyway with foolish persistence and paid $26 US to have it restored to MIUI V10.4.2.0 from some installed V11 (don't have it on my PC), after trying to downgrade with TWRP to flash the MIUI V10.4.2.0 zip file. Jesus, nothing but the LED light functioned. Like you, the installed VER was A_V at 1, while the ROM to be installed was at 0.
Is it possible to install a custom ROM that allows downgrades and then fastboot flash_all.bat with a lower version MIUI ROM that was initially installed? Sure as hell not going to try this, but it is a question that might be successfully answered. Sorry for not being of help for you.
Have Global V, very pleased with RN8P and MIUI V10.4.2.0.
Thomas_xxxxx said:
Hi, can I flash MIUI ROM which has this in flash_all.bat:
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
when my current ROM after running "fastboot getvar anti" returns 1?
Will MiFlash prevent me from bricking Redmi Note 8 Pro with returning an error because of anti rollback?
P.S.: If I download my current rom in fastboot version there is also CURRENT_ANTI_VER=0 so I truly do not understand why it returns 1 after that command.
Click to expand...
Click to collapse
Hello, my friend.
Downgrading Redmi Note 8 pro is very easy. I also struggled at first trying to find the safest method to downgrade and got stuck on " Anti Roll Back Protection" which on my device was " 1 " and all the previous consecutive roms had " Anti Roll Back Protection " value which was " 0 ". So didn't know what to do. but after some research, I found out that it was not a big issue.
You just need to use the fastboot method. Just extract the fastboot rom in the C drive and click on the " flash-all.bat " It will not brick your device. I tried it on my Redmi Note 8 Pro Global version
Also MiFlash will prevent you from downgrading if you have anti-var value less then your device value, which is the case for all the roms.
ppthom said:
When I tried to use MIFlash to do this, it just returned an error without bricking the device.
However, I bricked my RN8P anyway with foolish persistence and paid $26 US to have it restored to MIUI V10.4.2.0 from some installed V11 (don't have it on my PC), after trying to downgrade with TWRP to flash the MIUI V10.4.2.0 zip file. Jesus, nothing but the LED light functioned. Like you, the installed VER was A_V at 1, while the ROM to be installed was at 0.
Is it possible to install a custom ROM that allows downgrades and then fastboot flash_all.bat with a lower version MIUI ROM that was initially installed? Sure as hell not going to try this, but it is a question that might be successfully answered. Sorry for not being of help for you.
Have Global V, very pleased with RN8P and MIUI V10.4.2.0.
Click to expand...
Click to collapse
And where did you get it unbrick?
Faisal-Shahzad said:
Hello, my friend.
Downgrading Redmi Note 8 pro is very easy. I also struggled at first trying to find the safest method to downgrade and got stuck on " Anti Roll Back Protection" which on my device was " 1 " and all the previous consecutive roms had " Anti Roll Back Protection " value which was " 0 ". So didn't know what to do. but after some research, I found out that it was not a big issue.
You just need to use the fastboot method. Just extract the fastboot rom in the C drive and click on the " flash-all.bat " It will not brick your device. I tried it on my Redmi Note 8 Pro Global version
Also MiFlash will prevent you from downgrading if you have anti-var value less then your device value, which is the case for all the roms.
Click to expand...
Click to collapse
So where exactly should I extract fastboot ROM? Directly in C:/ drive and then run flash_all.bat? That is all? So I will have for example folder in C:/begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.00_9.0_eea?
Thomas_xxxxx said:
So where exactly should I extract fastboot ROM? Directly in C:/ drive and then run flash_all.bat? That is all? So I will have for example folder in C:/begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.00_9.0_eea?
Click to expand...
Click to collapse
Yeah, exactly as simple as that.
Just put your device in fastboot mode, I am pretty sure you know how to do that.
Extract the fastboot room directly in the C drive. Just click on the flash-all.bat file. It will start flashing the rom and will take about 8 to 10 minutes.
Its literally a one click installation and is even easier than using MiFlash tool. Try it out and tell me if it works
Faisal-Shahzad said:
Yeah, exactly as simple as that.
Just put your device in fastboot mode, I am pretty sure you know how to do that.
Extract the fastboot room directly in the C drive. Just click on the flash-all.bat file. It will start flashing the rom and will take about 8 to 10 minutes.
Its literally a one click installation and is even easier than using MiFlash tool. Try it out and tell me if it works
Click to expand...
Click to collapse
I will let you know but I must wait till tomorrow to have unlocked bootloader so now I am doing some research. So I cannot brick with this method for sure, yes? And which ROM did you exactly flash?
Thomas_xxxxx said:
I will let you know but I must wait till tomorrow to have unlocked bootloader so now I am doing some research. So I cannot brick with this method for sure, yes? And which ROM did you exactly flash?
Click to expand...
Click to collapse
I downgraded from Miui 12.0.2 to Miui 11.0.6 android 9.
Then from Miui 11.0.6 Android 9 to Miui 11.0.5 Android 10.
Downgraded and upgraded without any problems.
I was able to to do it. It may also work for you .
Faisal-Shahzad said:
I downgraded from Miui 12.0.2 to Miui 11.0.6 android 9.
Then from Miui 11.0.6 Android 9 to Miui 11.0.5 Android 10.
Downgraded and upgraded without any problems.
I was able to to do it. It may also work for you .
Click to expand...
Click to collapse
I will try tomorrow and let you know, thanks for help now.
Faisal-Shahzad said:
I downgraded from Miui 12.0.2 to Miui 11.0.6 android 9.
Then from Miui 11.0.6 Android 9 to Miui 11.0.5 Android 10.
Downgraded and upgraded without any problems.
I was able to to do it. It may also work for you .
Click to expand...
Click to collapse
And that method with fastboot will remain my bootloader unlocked? And will it wipe everythting from phone?
Can't give you the web page, but there are more than 1 to give help (for money), and you can be vulnerable to cheats and viruses. My guy was in the Ukraine, very honest and helped me more than once. Just Google with different words until you find what you need. Could take some time, just be patient.
Thomas_xxxxx said:
And that method with fastboot will remain my bootloader unlocked? And will it wipe everythting from phone?
Click to expand...
Click to collapse
Your bootloader will remain unlocked and the data will be wiped clean.
Faisal-Shahzad said:
Your bootloader will remain unlocked and the data will be wiped clean.
Click to expand...
Click to collapse
I already tried to downgrade via fastboot method and everything worked like a charm. Thank you for helping once again. Now I am on Android 9 and I can install factory preloader and then custom ROMs.
Faisal-Shahzad said:
I downgraded from Miui 12.0.2 to Miui 11.0.6 android 9.
Then from Miui 11.0.6 Android 9 to Miui 11.0.5 Android 10.
Downgraded and upgraded without any problems.
I was able to to do it. It may also work for you .
Click to expand...
Click to collapse
My friend my getvar antiblank)
Its safe to downgrade redmi 8a
Thomas_xxxxx said:
I already tried to downgrade via fastboot method and everything worked like a charm. Thank you for helping once again. Now I am on Android 9 and I can install factory preloader and then custom ROMs.
Click to expand...
Click to collapse
Bro help when o extracted the rom is says
Flash all ther is no.bat but when I search in that folder I find it also can you provide me with the link of your rom thx
Faisal-Shahzad said:
Yeah, exactly as simple as that.
Just put your device in fastboot mode, I am pretty sure you know how to do that.
Extract the fastboot room directly in the C drive. Just click on the flash-all.bat file. It will start flashing the rom and will take about 8 to 10 minutes.
Its literally a one click installation and is even easier than using MiFlash tool. Try it out and tell me if it works
Click to expand...
Click to collapse
Do I need to unclok boot loader
Hello,
The Xiaomi 9 SE Global Unlocked of my girlfriend was restarting a lot (restart loop) and I tried to flash a ROM but I accidentaly flashed and locked the mobile on a "MIUI version that can´t be installed on this device" (grus_global_images_V12.0.2.0.QFBMIXM_20200910.0000.00_10.0_global)
The problem is the phone was wiped and I cant unlock the phone now. What to do? I can´t flash another ROM or unlock it and I just have access to Recovery Mode and Fastboot mode.
Please any help would be greatly appreciated.
It´s 4 am where I live and I´ll go to bed... But Will read here as soon as I´m awake. Thanks a lot in advance.
Let me continue my story... I still need help.
I contacted an authorized and he helped me to EDL a flashed version and I reinstalled the MIUI 12.0.2 Global stable on the phone.
But the phone is still TURNING OFF BY ITSELF (this was the reason because I tried flashing it on the first place). I don´t know the cause but it does not seems to be a faulty battery. I heard the phone has Anti RollBack protection. Is it right?
So I need help on how to procced. I would like to RollBack it to MIUI 11 where I didn´t had this problems...
Unfortunately you can NEVER go back once you flash a ROM on Xiaomi devices. However that doesn't prevent you from flashing custom ROMs.
Though you still need to be careful, because once flashed there is no going back.
I recommend testing the ROM on an emulator before flashing it. Here is how.
Also don't forget to check for your rollback protection index and the ROM's index before flashing.
Follow this post and scroll down to "How to find rollback index of images".
XDHx86 said:
Unfortunately you can NEVER go back once you flash a ROM on Xiaomi devices. However that doesn't prevent you from flashing custom ROMs.
Though you still need to be careful, because once flashed there is no going back.
I recommend testing the ROM on an emulator before flashing it. Here is how.
Also don't forget to check for your rollback protection index and the ROM's index before flashing.
Follow this post and scroll down to "How to find rollback index of images".
Click to expand...
Click to collapse
what do you mean never? you can flash miui with miflash
giorgarasgr said:
what do you mean never? you can flash miui with miflash
Click to expand...
Click to collapse
You can read more about xiaomi anti-rollback here.
Hello i recently bricked my phone (poco f3) and there is no firmware on the phone. when i boot up it shows the poco logo and instalntly opne fastboot, fastboot works but the mi recovery not., i tried to flash the global img and there is a error.it says failed reading sparse file , i researched what this means but i found nothing in the internet. so i want to ask you guys if you can help me with this problem. i have another question: what is the super.img?
michits said:
Hello i recently bricked my phone (poco f3) and there is no firmware on the phone. when i boot up it shows the poco logo and instalntly opne fastboot, fastboot works but the mi recovery not., i tried to flash the global img and there is a error.it says failed reading sparse file , i researched what this means but i found nothing in the internet. so i want to ask you guys if you can help me with this problem. i have another question: what is the super.img?
Click to expand...
Click to collapse
If Fastboot works, this means your phone is not bricked.
Just make sure your bootloader isn't relocked.
Then flash stock rom 12.5.1 using MiFlash, better than CMD command. You get to see errors in Miflash.
If it fails, then change USB port in your PC. ( USB ports on the back are recommended)
Good luck.
laid1995 said:
If Fastboot works, this means your phone is not bricked.
Just make sure your bootloader isn't relocked.
Then flash stock rom 12.5.1 using MiFlash, better than CMD command. You get to see errors in Miflash.
If it fails, then change USB port in your PC. ( USB ports on the back are recommended)
Good luck.
Click to expand...
Click to collapse
(i am a german) when i use the new mi flash then it says this:
michits said:
(i am a german) when i use the new mi flash then it says this:
Click to expand...
Click to collapse
I don't really know the exact fix for that.
Try using a newer/different version of MiFlash
this version works for me
laid1995 said:
I don't really know the exact fix for that.
Try using a newer/different version of MiFlash
Click to expand...
Click to collapse
michits said:
this version works for me
Click to expand...
Click to collapse
I'd suggest using a newer version. That could work though. Still, I highly recommend newer version. For the safety of your phone.
2015 version, that is so old
what if i flash all exept storage? and my main problem is it wont flash super.img
michits said:
(i am a german) when i use the new mi flash then it says this:
Click to expand...
Click to collapse
Dude we don't speak German you would have to use Google translate to tell us what it says in English. What did you do to your Poco f3 that bricked it? Do you have an unlocked bootloader? Because it looks to me like 20 threads a day are created for this phone by people who aren't actually into development but just want help, which is fine but it's not what xda is for.
Techguy777 said:
Dude we don't speak German you would have to use Google translate to tell us what it says in English. What did you do to your Poco f3 that bricked it? Do you have an unlocked bootloader? Because it looks to me like 20 threads a day are created for this phone by people who aren't actually into development but just want help, which is fine but it's not what xda is for.
Click to expand...
Click to collapse
Ok maybe make a "poco F3 bricked megathread" as to compress all threads into one?
michits said:
what if i flash all exept storage? and my main problem is it wont flash super.img
Click to expand...
Click to collapse
I haven't tried it dude. And I wouldn't. That could actually brick the phone. Older peograms may not agree with our A/B POCOF3 partitions.
michits said:
(i am a german) when i use the new mi flash then it says this:
Click to expand...
Click to collapse
This is super easy to fix. Take a look at this video.
never use clean all and lock option to avoid brick