Related
I have compiled a pure AOSP 6.0 MM ROM for Optimus G, but I don't have a device right now to test it.
If anyone of you willing to test it, I will upload it for you
I agree my email [email protected]
but nfc doesn't work on my device
pav2805 said:
I agree my email [email protected]
but nfc doesn't work on my device
Click to expand...
Click to collapse
Will get back to you in morning
I agree too. My email [email protected].
Área you dead?
kleberkill said:
Área you dead?
Click to expand...
Click to collapse
lol :laugh:
lesterss said:
lol :laugh:
Click to expand...
Click to collapse
I was busy in my Final Year project .. Will upload it in the morning
UPLOADED
https://mega.nz/#!rQY0QQ4A!npmAL89Ka7ASsqMZTkHu-TZDGUjD_HBbf2HMAoCrikI
Test it and give your feedback .. TWRP RECOMMENDED
The pure AOSP doesn't have SMS app ?
paul_zm said:
The pure AOSP doesn't have SMS app ?
Click to expand...
Click to collapse
It has
paul_zm said:
The pure AOSP doesn't have SMS app ?
Click to expand...
Click to collapse
Is it working?
Frostyagent said:
UPLOADED
https://mega.nz/#!rQY0QQ4A!npmAL89Ka7ASsqMZTkHu-TZDGUjD_HBbf2HMAoCrikI
Test it and give your feedback .. TWRP RECOMMENDED
Click to expand...
Click to collapse
Downloading now, ?
Frostyagent said:
Is it working?
Click to expand...
Click to collapse
What ?
paul_zm said:
What ?
Click to expand...
Click to collapse
ROM is booting or not?
Error message appeared. Saying that my device is e975, and can not install.
kleberkill said:
Error message appeared. Saying that my device is e975, and can not install.
Click to expand...
Click to collapse
Which recovery are you using?
Frostyagent said:
Which recovery are you using?
Click to expand...
Click to collapse
TWRP 2.8.7
---------- Post added at 08:54 PM ---------- Previous post was at 08:52 PM ----------
I'm going to downgrade the recovery and I will try again.
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
I'm going to downgrade the recovery and I will try again.
kleberkill said:
TWRP 2.8.7
---------- Post added at 08:54 PM ---------- Previous post was at 08:52 PM ----------
I'm going to downgrade the recovery and I will try again.
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
I'm going to downgrade the recovery and I will try again.
Click to expand...
Click to collapse
No need to downgrade the recovery, issue has been resolved, there was an error in the updater-script, uploading it again
Frostyagent said:
No need to downgrade the recovery, issue has been resolved, there was an error in the updater-script, uploading it again
Click to expand...
Click to collapse
Ok, thanks. Waiting...
kleberkill said:
Ok, thanks. Waiting...
Click to expand...
Click to collapse
Uploaded
https://mega.nz/#!iZRlGBTb!aJhIBeh6W66zha6UAbWfEAu8WCieCR1kSFMbo6E2qP8
This rom has been ported by XDA member 'gtbluesky'. His profile is at -
http://forum.xda-developers.com/member.php?u=4474974
I found it on a chinese website and am merely posting it to help guys owning the SHV-E300 since I cound not find any version of MIUI anywhere else. The rom is smooth. Before creating this thread I tried contacting gtbluesky for permission but he is not replying. Anyway if he tells me no then I'll need to delete this thread.
ROM Version:MIUI 7.5.11.22 Beta
Download link:
https://drive.google.com/file/d/0B9jAC7MbSyX6TkxPTmRqUWJFb3M/view
https://docs.google.com/uc?id=0B9jAC7MbSyX6TkxPTmRqUWJFb3M&export=download
Flash like you usually do. In TWRP or any good custom recovery make a backup of current rom, do factory reset, data, dalvic and cache wipe. Install the already downloaded "miui_E300_gtbluesky_5.11.22_V7_4.4changed.zip". Reboot. First boot may take a bit long time. If it is stuck at the samsung logo then boot in recovery and do a dalvik and cache wipe and reboot. Do not use MIUI updater to update your MIUI version directly.
This rom has solved my Connection problem or invalid MMI Code and Undefined additional service. Contact customer center problem.
Perfect..thanks lot...
herry ep said:
Perfect..thanks lot...
Click to expand...
Click to collapse
Most welcome. So have you already started using it?
For all E300 SLK????????
dowloading ����������������
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
herry ep said:
Perfect..thanks lot...
Click to expand...
Click to collapse
Are you flash this new Rom?????? Give feedback thank
---------- Post added at 10:08 AM ---------- Previous post was at 10:02 AM ----------
Im using e300k.. mmi code is no problem..you can check ..with dial.. good signal , good camera, smooth, everything work well.. thanks again thanks a lot
---------- Post added at 11:56 AM ---------- Previous post was at 11:53 AM ----------
chetannaik24 said:
Most welcome. So have you already started using it?
Click to expand...
Click to collapse
Yes..iam started using this rom.. iam in love with my e300k now
vuut said:
For all E300 SLK????????
dowloading ����������������
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
Are you flash this new Rom?????? Give feedback thank
---------- Post added at 10:08 AM ---------- Previous post was at 10:02 AM ----------
Click to expand...
Click to collapse
I have the E300K but I guess it's for all of them E300 ones.
herry ep said:
Im using e300k.. mmi code is no problem..you can check ..with dial.. good signal , good camera, smooth, everything work well.. thanks again thanks a lot
---------- Post added at 11:56 AM ---------- Previous post was at 11:53 AM ----------
Yes..iam started using this rom.. iam in love with my e300k now
Click to expand...
Click to collapse
I'm glad for you!!!
Rom not without root and googleplay
chetannaik24 said:
Do not use MIUI updater to update your MIUI version. It will give problems like touch screen not working properly.
Click to expand...
Click to collapse
You could try to backup the kernel and flash over the updated ROM and see if it works.
vuut said:
Rom not without root and googleplay
Click to expand...
Click to collapse
1. Enable via Security > Permissions or flash SuperSU.
2. Use Google Installer from the built-in app market.
Sent from my Redmi 3 using XDA Labs
vuut said:
Rom not without root and googleplay
Click to expand...
Click to collapse
you can always flash 'open gapps'.
chetannaik24 said:
you can always flash 'open gapps'.
Click to expand...
Click to collapse
Flash with choice gapp's 4.4.0 ---5.0 or 6.0,???? Thank
krasCGQ said:
You could try to backup the kernel and flash over the updated ROM and see if it works.
Confirmed! As per your advise I replaced the boot.img and updated. Update success with no issues yet.
p.s. Lost imei. Trying to restore it.
Click to expand...
Click to collapse
vuut said:
Flash with choice gapp's 4.4.0 ---5.0 or 6.0,???? Thank
Click to expand...
Click to collapse
4.4
Sent from my ASUS_Z00A using XDA Labs
krasCGQ said:
4.4
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
Woa [emoji14] [emoji14] [emoji14]
chetannaik24 said:
krasCGQ said:
You could try to backup the kernel and flash over the updated ROM and see if it works.
some issues actually ( after applying changed update zip) no wifi, audio, imei and maybe some more that i don't know. backup and restore kernel didn't help. so i'm back to where i had started from ( to original MIUI I mean).
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Your device S.L.K???????
Thank you for this i will have to give it a try on my E300s
vuut said:
Your device S.L.K???????
Click to expand...
Click to collapse
its K. miui is bug free. Just the update causes problems.
treblanon said:
Thank you for this i will have to give it a try on my E300s
Click to expand...
Click to collapse
np. Worth a try since it feels smooth and fresh. Everything works fine don't worry. for equaliser i flashed dolby found on xda.
Hi guy try new rom http://forum.xda-developers.com/gal...a-galaxy-s4-shv-e300-i9500-t3493625?nocache=1
chetannaik24 said:
its K. miui is bug free. Just the update causes problems.
Click to expand...
Click to collapse
Do not update auto on your device...waitting for him
Miui8 7.1.12 Global Dev Android7.0 For Mi5
Fastboot http://bigota.d.miui.com/7.1.12/gem...12_20170111.0000.00_7.0_global_6d38c0cd9b.tgz
Recovery http://bigota.d.miui.com/7.1.12/miui_MI5Global_7.1.12_017dbbf1d9_7.0.zip
Goodluck
greek language support?or is a china?
Only on Chinese and English, no ?
...and the roms dev have root, no ?
I'm not a moderator
bootloop....
tasoskio said:
bootloop....
Click to expand...
Click to collapse
Are you testing right now and you have a bootloop ? Recovery or fastboot ?
neodante said:
Are you testing right now and you have a bootloop ? Recovery or fastboot ?
Click to expand...
Click to collapse
yes recovery
tasoskio said:
yes recovery
Click to expand...
Click to collapse
I'm thinking about test the rom... not feel like it anymore [emoji3]
neodante said:
I'm thinking about test the rom... not feel like it anymore [emoji3]
Click to expand...
Click to collapse
recovery or fastboot?
if you are flash and all is ok tell me the way....thank you
tasoskio said:
recovery or fastboot?
if you are flash and all is ok tell me the way....thank you
Click to expand...
Click to collapse
Recovery... But now I fear for the BOOTLOOP [emoji28]
Fastboot version work fine
shabtab said:
Remove the link before you get thrown out of Beta Team or get Banned.
Click to expand...
Click to collapse
Why should he remove the link?
Abt. Banning issue;
Maybe because it is under development subforum.
İt may be required under general subforum..
dacheftw said:
Why should he remove the link?
Click to expand...
Click to collapse
Global Dev is still in closed beta testing and testers are not allowed to share the ROM.
yes with fastboot is ok....
---------- Post added at 09:33 AM ---------- Previous post was at 09:28 AM ----------
why with twrp It does not let me to take back-up?
To avoid bootloop flash using ZCX twrp..
GPS doesn't work again. I'm back to 6.0.
furkonhesti said:
To avoid bootloop flash using ZCX twrp..
Click to expand...
Click to collapse
Which version of twrp btw are you beta member?
---------- Post added at 11:59 AM ---------- Previous post was at 11:58 AM ----------
selmandeli said:
GPS doesn't work again. I'm back to 6.0.
Click to expand...
Click to collapse
Did try all apps or gps test?
---------- Post added at 11:59 AM ---------- Previous post was at 11:58 AM ----------
[/COLOR]
Did try all apps or gps test?
Click to expand...
Click to collapse
Yes I did.
dkmsn8 said:
Which version of twrp btw are you beta member?
---------- Post added at 11:59 AM ---------- Previous post was at 11:58 AM ----------
Did you try all apps or gps test?
Click to expand...
Click to collapse
Working fine here
this kernel base on LA.UM.7.4.r1-03500-8x98.0(9.0)
import nubia driver and small part of nubia modification
Features
default fiops i/o scheduler
charging maximum current modify to 4A(The measured official charging head can reach 3800+mA)
Built in qcacld-3.0
about z17s(19.02.26 update)
I have completed the adaptation of z17s and everything is fine now.
The charging current is modified to a maximum of 4.5A (not the official fast charging)
12.21 update
see https://gitlab.com/xiayesuifeng/android_kernel_nubia_msm8998/commits/master
10.15 update
fix headset
build.prop(If adb is not available)
Code:
sys.usb.ffs.aio_compat=1
flash patch
https://mega.nz/#!ChYAWYhI!CGjOJd-P1VeXjk17ND-zQQlYWG-ulo-r8jUUT39YxJg
sign boot
https://forum.xda-developers.com/an...signing-boot-images-android-verified-t3600606
source:https://gitlab.com/xiayesuifeng/android_kernel_nubia_msm8998-caf
z17
TARGET_KERNEL_CONFIG use xiayesuifeng_nx563j_defconfig
z17s
TARGET_KERNEL_CONFIG use xiayesuifeng_nx595j_defconfig
Cool
xiayesuifeng said:
this kernel base on LA.UM.7.4.r1-03500-8x98.0(9.0)
import nubia driver and small part of nubia modification
Features
default fiops i/o scheduler
charging maximum current modify to 4A(The measured official charging head can reach 3800+mA)
Built in qcacld-3.0
Question
headset(No reason found yet)
build.prop(If adb is not available)
Code:
sys.usb.ffs.aio_compat=1
source:https://gitlab.com/nubia-dev/android_kernel_msm8998
TARGET_KERNEL_CONFIG use nitrogen-perf-NX563J_defconfig
Click to expand...
Click to collapse
Can you share a download link?
---------- Post added at 06:57 PM ---------- Previous post was at 06:25 PM ----------
Zjh0094 said:
Cool
Click to expand...
Click to collapse
Do you already download it?
Can you share?
Damn 4a how fast will it charge
Is it for z17 or z17s?
aljoscha81 said:
Can you share a download link?
---------- Post added at 06:57 PM ---------- Previous post was at 06:25 PM ----------
Do you already download it?
Can you share?
Damn 4a how fast will it charge
Click to expand...
Click to collapse
I have shared the source code
aljoscha81 said:
Is it for z17 or z17s?
Click to expand...
Click to collapse
z17，There are some drivers for z17s above, but not all, I don't have z17s, so I didn't complete it.
xiayesuifeng said:
z17，There are some drivers for z17s above, but not all, I don't have z17s, so I didn't complete it.
Click to expand...
Click to collapse
I am a noob at kernel compile with this code someone would be able to compile the kernel? Would it run lineage and treble roms?
aljoscha81 said:
I am a noob at kernel compile with this code someone would be able to compile the kernel? Would it run lineage and treble roms?
Click to expand...
Click to collapse
Normal use on my adapted nitrogenos (9.0)
xiayesuifeng said:
Normal use on my adapted nitrogenos (9.0)
Click to expand...
Click to collapse
Can you share the kernel and the nitrogen os
aljoscha81 said:
Can you share the kernel and the nitrogen os
Click to expand...
Click to collapse
https://mega.nz/#!ioIA0QDB!hC4ufd81iuBo5DQaeTVPzaHHkW6br2OWs3oaFoUFzOs
I will not share nitrogenos at present, but this kernel can be used on all 9.0.
xiayesuifeng said:
https://mega.nz/#!ioIA0QDB!hC4ufd81iuBo5DQaeTVPzaHHkW6br2OWs3oaFoUFzOs
I will not share nitrogenos at present, but this kernel can be used on all 9.0.
Click to expand...
Click to collapse
Thanks very much i will directly test:good:
---------- Post added at 10:04 AM ---------- Previous post was at 10:00 AM ----------
xiayesuifeng said:
https://mega.nz/#!ioIA0QDB!hC4ufd81iuBo5DQaeTVPzaHHkW6br2OWs3oaFoUFzOs
I will not share nitrogenos at present, but this kernel can be used on all 9.0.
Click to expand...
Click to collapse
Can it be that it must be renamed in boot.img to flash via twrp?
aljoscha81 said:
Thanks very much i will directly test:good:
---------- Post added at 10:04 AM ---------- Previous post was at 10:00 AM ----------
Can it be that it must be renamed in boot.img to flash via twrp?
Click to expand...
Click to collapse
this is kernel no boot
xiayesuifeng said:
this is kernel no boot
Click to expand...
Click to collapse
Can you guide how to flash?
aljoscha81 said:
Can you guide how to flash?
Click to expand...
Click to collapse
unpack your boot.img,replace kernel,repack boot.img
aljoscha81 said:
this kernel base on LA.UM.7.4.r1-03500-8x98.0(9.0)
import nubia driver and small part of nubia modification
Features
default fiops i/o scheduler
charging maximum current modify to 4A(The measured official charging head can reach 3800+mA)
Built in qcacld-3.0
Question
headset(No reason found yet)
build.prop(If adb is not available)
Can you share a download link?
---------- Post added at 06:57 PM ---------- Previous post was at 06:25 PM ----------
Do you already download it?
Can you share?
Damn 4a how fast will it charge
Click to expand...
Click to collapse
I'm sorry my device is android 7.1
Great manage to get it installed booting up is very fast also install apps seems to be faster:good:
It is amazing i achieved 3996ma by charging let me lie but for me it felt 50% akku in far under 10 minutes!
Good work many thanks
aljoscha81 said:
Great manage to get it installed booting up is very fast also install apps seems to be faster:good:
It is amazing i achieved 3996ma by charging let me lie but for me it felt 50% akku in far under 10 minutes!
Good work many thanks
Click to expand...
Click to collapse
I tried to unpack , change kernel and repack, but the new boot.img dont work
Can you share your boot.img?
thanks
perisman said:
I tried to unpack , change kernel and repack, but the new boot.img dont work
Can you share your boot.img?
thanks
Click to expand...
Click to collapse
Can it be that nubia logo apear and then it after a while just turn off? Here is the procedure to prevent that make a clean install (maybe you can first test your way) flash the kernel reboot to twrp 3.2.3-3 install the pie rom you want (i choose havoc os2 got everything working with it only quick setting animations not:sillygo to reboot menu choose signer force resign if it dont is signed what is normally the point the signing is important for the kernel ah and you have to flash this zip first before you sign
https://github.com/AdrianDC/kernel_.../master/release/kernel_permissive_patcher.zip
This is also important for the kernel to work!:good:
When that dont work write me again
perisman said:
I tried to unpack , change kernel and repack, but the new boot.img dont work
Can you share your boot.img?
thanks
Click to expand...
Click to collapse
you need to sign boot.img
xiayesuifeng said:
you need to sign boot.img
Click to expand...
Click to collapse
I tried with permissiive patcher and resign boot.img, and now boots to nubio logo, then rom logo (I am using descendant rom), and no more...
and stops here.
Congratulations havoc rom has been released for oneplus 7t
Here is link
https://sourceforge.net/projects/havoc-os/files/hotdogb/
Installation instructions
https://del.dog/yjaidupheh.txt
Gapps incl?
Looking at the size of the zip which 700 something mb, gapps seems unlikely. But how are we going to flash them then in the absence of twrp?
Sent from my OnePlus 7T using Tapatalk
---------- Post added at 03:16 PM ---------- Previous post was at 03:10 PM ----------
Win1droid1 said:
Congratulations havoc rom has been released for oneplus 7t
Here is link
https://sourceforge.net/projects/havoc-os/files/hotdogb/
Click to expand...
Click to collapse
thanks a lot for sharing this, is there a telegram group for discussions, how about bugs & gapps?
Sent from my OnePlus 7T using Tapatalk
rohit83 said:
Looking at the size of the zip which 700 something mb, gapps seems unlikely. But how are we going to flash them then in the absence of twrp?
Sent from my OnePlus 7T using Tapatalk
---------- Post added at 03:16 PM ---------- Previous post was at 03:10 PM ----------
thanks a lot for sharing this, is there a telegram group for discussions, how about bugs & gapps?
Sent from my OnePlus 7T using Tapatalk
Click to expand...
Click to collapse
Just tried flashing Gapps 10 pico with FKM, failed due to insufficient storage in /system. Does anybody know how to properly create the gapps-config and only install the core packages?
Rom is quite nice, If only we can get gapps working
can we use the google installer apk? normal used in chinese smartphone without google apps
https://androidfilehost.com/?fid=818070582850510260 (payload dumper)
iaio72 said:
can we use the google installer apk? normal used in chinese smartphone without google apps
https://androidfilehost.com/?fid=818070582850510260 (payload dumper)
Click to expand...
Click to collapse
Tried it, the app only lets you install up to android 7. though we would still have the problem of system partition not being big enough.
We may end up having to do something like this: https://forum.xda-developers.com/nexus-4/general/guide-increase-nexus-4s-partition-space-t3800264
and this can we help? ---> https://www.digitbin.com/yalp-store-apk/
---------- Post added at 01:04 PM ---------- Previous post was at 12:16 PM ----------
Sporos said:
Tried it, the app only lets you install up to android 7. though we would still have the problem of system partition not being big enough.
We may end up having to do something like this: https://forum.xda-developers.com/nexus-4/general/guide-increase-nexus-4s-partition-space-t3800264
Click to expand...
Click to collapse
Don't even attempt to do anything with this. This is because of Androids 10 new partitioning system.
/system is permanent read only and there's nothing you can do about.
The ROM developer has to compile the ROM with gapps included, otherwise there is no way to get them.
https://source.android.com/devices/tech/ota/dynamic_partitions
https://source.android.com/devices/bootloader/system-as-root
Has anyone been able to gain root?
oneszero said:
Has anyone been able to gain root?
Click to expand...
Click to collapse
Get the boot image and patch it with magisk manager, then flash it.
That should work.
Sent from my OnePlus7TPro using XDA Labs
Lossyx said:
Get the boot image and patch it with magisk manager, then flash it.
That should work.
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
I have tried to the boot image that is unpacked when you run payload dumper, but every time i flash it it wont boot and there no Havoc boot animation.
Any ideas?
oneszero said:
I have tried to the boot image that is unpacked when you run payload dumper, but every time i flash it it wont boot and there no Havoc boot animation.
Any ideas?
Click to expand...
Click to collapse
Got root, now just gapps.
rohit83 said:
.....
thanks a lot for sharing this, is there a telegram group for discussions, how about bugs & gapps?
Click to expand...
Click to collapse
<Mod edit>
Sent from my OnePlus7T using XDA Labs
---------- Post added at 08:13 PM ---------- Previous post was at 08:08 PM ----------
Sporos said:
...
Rom is quite nice, If only we can get gapps working
Click to expand...
Click to collapse
How's the ROM bro? Everything fine? Found any bugs? Missing anything other than GApps? Please share your thoughts..
Sent from my OnePlus7T using XDA Labs
@niyonsv rom is very good, but i dont find the advanced restart.
good work dev
oneszero said:
Has anyone been able to gain root?
Click to expand...
Click to collapse
Yes, you can patch the boot.img with magisk canary
Sporos said:
Yes, you can patch the boot.img with magisk canary
Click to expand...
Click to collapse
Does your magisk installation cause your whole system to lag and.or not respond?
niyonsv said:
<Mod edit>
Sent from my OnePlus7T using XDA Labs
---------- Post added at 08:13 PM ---------- Previous post was at 08:08 PM ----------
How's the ROM bro? Everything fine? Found any bugs? Missing anything other than GApps? Please share your thoughts..
Click to expand...
Click to collapse
I like it a lot, didn't have time to do much testing but they did a great job of integrating device-specific settings like the 90hz option. fingerprint functionality is 50/50 but I'm sure that can be improved. I flashed back to AOSIP for now as my daily driver but so far this is promising.
---------- Post added at 02:16 AM ---------- Previous post was at 02:14 AM ----------
oneszero said:
Does your magisk installation cause your whole system to lag and.or not respond?
Click to expand...
Click to collapse
No it worked fine for me. Make sure you use the canary magisk manager to patch the boot img, then fastboot boot magisk_patched.img, boot up and direct install in magisk manager.
Edit: don't flash your magisk patched boot image
Sporos said:
I like it a lot, didn't have time to do much testing but they did a great job of integrating device-specific settings like the 90hz option. fingerprint functionality is 50/50 but I'm sure that can be improved. I flashed back to AOSIP for now as my daily driver but so far this is promising.
---------- Post added at 02:16 AM ---------- Previous post was at 02:14 AM ----------
No it worked fine for me. Make sure you use the canary magisk manager to patch the boot img, then fastboot boot magisk_patched.img, boot up and direct install in magisk manager.
Edit: don't flash your magisk patched boot image
Click to expand...
Click to collapse
Which FW are you running?...Forgot to ask.
oneszero said:
Which FW are you running?...Forgot to ask.
Click to expand...
Click to collapse
I'm on the 1.0.7 global FW.