Related
My i9192 s4 mini got hard bricked while charging I don't know how or why it happened..
I found this somewhere in the forum.. can anyone make me a dump file for i9192 because I don't know anyone who has the same phone as me so I'm asking for help. I tried to bring it to a programmer but they said they have to j-tag it for 3days up to a week. but I don't want to leave my phone on other people's hand so I'd rather fix this myself.
help would be really really appreciated. TIA
initial situation:
- we have a brick with killed bootloader after unsuccessful flashing, not turning on, no reaction on buttons, no any mode available (recovery, download).
What is needed:
- any Linux, like Ubuntu, but more convinient is PartedMagic of any version;
- MicroSD card;
- working phone of the same model or dump of its first 139008 blocks (about 70MB).
How to make a dump:
- on rooted device download from Google Play app "TerminalEmulator" and run it;
- Enter su, appears "[email protected]:/ #", enter "dd if=dev/block/mmcblk0 of=sdcard/mmcblk0uptop7.img count=139008";
- after completion copy file "mmcblk0uptop7.img" from the phone to PC, for example to drive C:/.
How to revive the phone:
- insert MicroSD into PC and launch "PartedMagic";
- copy dump to MicroSD, for this open Terminal, we see "[email protected]:~#", enter "dd if=/media/WIN7/mmcblck0uptop7.img of=/dev/mmcblk0", where "/media/WIN7/" - it's your drive C:/, where stored a dump, and "/dev/mmcblk0mmcblk0" - your MicroSD in PartedMagic;
- wait for completion, remove MicroSD;
- put MicroSD to non-working phone, connect the phone to PC using USB;
- if all steps are done correctly, phone will boot by pressing the keys, using bootloader from external MicroSD;
- now it is possible to re-flash internal eMMC using Odin, to make a possibility to remove external card;
- that's all, phone completely revived.
Supported devices:
- tested on i9190, will work on i9192/i9195, should work on smartphones of other brands with new Qualcomm chips.
Technical details:
- details are too big to write. If you are interested - read about MSM8930 boot architecture and etc.
Some conclusions:
- Qualcomm has made a good modern chip, with a lot of feasibility, but not placing many information to open sources;
- Samsung - trying to complicate life of users by integrating of its own digital signature, what is leading to immediate bricking of devices when trying to modify bootloader. Be careful.
Click to expand...
Click to collapse
Update:
Please try to send me an unbrick.img file from a stock i9192 that came from Saudi.. but if not from Saudi at least a stock ones..
If someone could send me a full or even half image file from a i9192 stock device
thank you.
I just need the "make a dump" part.
Bcoz of knox m not rooting my phone but I really want to help you
Is there any othet way to make dump file without a rooted device?
NafeesTyagi said:
Bcoz of knox m not rooting my phone but I really want to help you
Is there any othet way to make dump file without a rooted device?
Click to expand...
Click to collapse
I don't know if there's another way tho. but thanks anyway. even my phone is not rooted. I'll bring it to a service center today but I doubt they can get it fixed because the warranty of my phone is in another country and I'm in the Philippines right now. probably I will have to pay for it if they try to fix it but it's gonna be expensive.. I just want to save some bucks and try to fix it myself but unfortunately I don't have another phone like this one to do that, neither my friends.
EDIT:
Unfortunately they keep refusing to J-TAG my unit.. they said that they don't have software to j-tag i9192.
I'll upload mine when I get to the office
Sent from my GT-I9192 using Tapatalk
fburgos said:
I'll upload mine when I get to the office
Sent from my GT-I9192 using Tapatalk
Click to expand...
Click to collapse
Thanks!! I hope I can fix my phone.. it's been a month since I last used it.
here you go, its from a the latest firmware
https://www.dropbox.com/s/89yodahtvig6lhc/debrick.img
fburgos said:
here you go, its from a the latest firmware
https www . dropbox . com s 89yodahtvig6lhc debrick.img
Click to expand...
Click to collapse
Thank you bro! is that from i9192?.. gonna update if I fixed my phone so ppl who has same problem will be able to use this thread.
EDIT: IT has some improvements its vibrating now when I plug it in my PC but the problem is ODIN won't detect my phone. Hmm
Hi I have some improvements but I could not flash my phone.. it keeps failing on ODIN, sorry im just a newbie on this kind of stuff and still learning.. I used the stockfirmware which is the md5 file that is 1.4gb for my phone is that the right one for the bootloader?
its like this
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 139008 SECTORS
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
now that you have a debrick image follow this guide , hope it helps.
http://forum.xda-developers.com/showthread.php?t=2600869
btw you don't need to follow step 2.2 of that guide
dovakinn said:
now that you have a debrick image follow this guide , hope it helps.
http://forum.xda-developers.com/showthread.php?t=2600869
btw you don't need to follow step 2.2 of that guide
Click to expand...
Click to collapse
same thing happened still on that root recovery mode.. the problem is I'm stuck at flashing my phone.. probably the problem is the version of the firmware @jburgos gave me.. I need to know what version is his firmware and where it came from so I can download the stock firmware for that version.
can you get into download mode ?? a quick glance a jburgos proflie shows he is most likely using a Latin American firmware , though i really doubt that it will make diffrence, if you can get into download mode you can try flashing it again with your stock firmware.
by mistake i had deleted my image file and right now i am on a really bad connection uploading another image will tale me 3 days
dovakinn said:
can you get into download mode ?? a quick glance a jburgos proflie shows he is most likely using a Latin American firmware , though i really doubt that it will make diffrence, if you can get into download mode you can try flashing it again with your stock firmware.
by mistake i had deleted my image file and right now i am on a really bad connection uploading another image will tale me 3 days
Click to expand...
Click to collapse
I can't get into download mode.. btw mine is the Saudi Arabia version..
Its not download mode and I took a picture of it so you guys can see:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 139008 SECTORS
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
Man I'm stuck.. I thought I had it but its not flashing through root recovery mode
I wonder if I need the exact same phone as dump, or I need a longer address on dump, anymore opinion guys I'm kinda getting annoyed on my phone. idk what is root recovery mode either..
I'm currently stuck on Boot Recovery Mode that has no android logo.. can't go to download mode.
If someone could send me a full or even half image file from a i9192 stock device it would be very helpful.
this is the rom i used for the image, http://forum.xda-developers.com/showthread.php?t=2620621
i have another image from a past firmware but its at home and i dont the firmware version
fburgos said:
this is the rom i used for the image, http://forum.xda-developers.com/showthread.php?t=2620621
i have another image from a past firmware but its at home and i dont the firmware version
Click to expand...
Click to collapse
which model did u use tho?
I'm stuck at boot recovery mode I can't go to download mode.. I hope someone who has stock rom will share their .img file.. but still I'm going to download that custom rom and try to flash it.
jhetz09 said:
which model did u use tho?
I'm stuck at boot recovery mode I can't go to download mode.. I hope someone who has stock rom will share their .img file.. but still I'm going to download that custom rom and try to flash it.
Click to expand...
Click to collapse
mi device its a i9192 from panama
sorry to hear didnt work, i use this guide to get the debrick.img,
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security http://forum.xda-developers.com/showthread.php?t=2625628
i have another .img but not with me, broke my screen, next week ill upload when i get my phone back, i think the other firmware was from ubmh1 odin firmware but im not shure wich firmware but im shure it was a stock samsung that came without knox
do you remember wich firmware was in your device, was a knox one?
fburgos said:
mi device its a i9192 from panama
sorry to hear didnt work, i use this guide to get the debrick.img,
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security http://forum.xda-developers.com/showthread.php?t=2625628
i have another .img but not with me, broke my screen, next week ill upload when i get my phone back, i think the other firmware was from ubmh1 odin firmware but im not shure wich firmware but im shure it was a stock samsung that came without knox
do you remember wich firmware was in your device, was a knox one?
Click to expand...
Click to collapse
my device model is either
KSA-I9192XXUAMH3
KSA-I9192XXUBNB1
I dont think my phone is with knox
well finally i was on stable connection , here is the my debrick image this also made from the guide http://forum.xda-developers.com/showthread.php?t=2625628 suggest you use this to write to your SD http://forum.xda-developers.com/showthread.php?t=2600869 and if your cell boots try go imd into download mode and flash your stock rom ,
this from firmware I9192DDU1BML1 , btw this img was created after i had deleted knox and other bloat ware from the rom , hope it helps.
https://www.dropbox.com/s/i6ul61hisnvrjog/debrick.img
dovakinn said:
well finally i was on stable connection , here is the my debrick image this also made from the guide http://forum.xda-developers.com/showthread.php?t=2625628 suggest you use this to write to your SD http://forum.xda-developers.com/showthread.php?t=2600869 and if your cell boots try go imd into download mode and flash your stock rom ,
this from firmware I9192DDU1BML1 , btw this img was created after i had deleted knox and other bloat ware from the rom , hope it helps.
https://www.dropbox.com/s/i6ul61hisnvrjog/debrick.img
Click to expand...
Click to collapse
gonna try it.. thanks for sharing. gonna post if there's an improvement..
I'll consider this as my last resort.. ill send it to the seller since I still have warranty for this phone.. I never flashed or rooted this phone. but if I send it back it'll take a month to get it back.. but better than nothing.
hi
im facing this problem of not having the bootloader page
i once rooted and unlocked the bootloader
then for upgrading the firmware purpose i unrooted and relocked the bootloader
now i want to flash the new firmware , but i cant bcause of no bootloader page
i tried rooting (failed bcause of the same reason)
i tried unlocking (" " " " ")
i cant do anything cause of this problem
pls help me guys
sorry for the bad english
mohdyaz said:
hi
im facing this problem of not having the bootloader page
i once rooted and unlocked the bootloader
then for upgrading the firmware purpose i unrooted and relocked the bootloader
now i want to flash the new firmware , but i cant bcause of no bootloader page
i tried rooting (failed bcause of the same reason)
i tried unlocking (" " " " ")
i cant do anything cause of this problem
pls help me guys
sorry for the bad english
Click to expand...
Click to collapse
If you can access recovery do adb sideload your rom again, it will fix easily.
If not, do this:
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645
ozank said:
If you can access recovery do adb sideload your rom again, it will fix easily.
If not, do this:
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645
Click to expand...
Click to collapse
i tried adb sideload , it loads till 54% and then fails i tried it 5 times i says the same thing
fone works fine but theres no droidboot
i want droidboot
mohdyaz said:
i tried adb sideload , it loads till 54% and then fails i tried it 5 times i says the same thing
fone works fine but theres no droidboot
i want droidboot
Click to expand...
Click to collapse
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.
Fixed!!!
ozank said:
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.
Click to expand...
Click to collapse
Hey bro, I just fixed mine. I had no bootloader, no recovery, and the whole partition was ruined. Only a battery with question mark.
First, I fixed the fastboot and recovery. Then fixed the whole partition table using @swiczak 's process. This process has a tiny flaw with the "droidboot.bin" file. I have right file to use. Thanks for keeping me up with this. :highfive:
@mohdyaz, bro......can u have a little patience? I will post a total guide with steps and required files. Till then, take a break. :good:
ozank said:
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.
Click to expand...
Click to collapse
i dint understand @ozank
and i tried to downgrade , it shows
total xfer : 1.14x
a8962383 said:
Hey bro, I just fixed mine. I had no bootloader, no recovery, and the whole partition was ruined. Only a battery with question mark.
First, I fixed the fastboot and recovery. Then fixed the whole partition table using @swiczak 's process. This process has a tiny flaw with the "droidboot.bin" file. I have right file to use. Thanks for keeping me up with this. :highfive:
@mohdyaz, bro......can u have a little patience? I will post a total guide with steps and required files. Till then, take a break. :good:
Click to expand...
Click to collapse
ok , my fone works fine but jus theres no droidboot(bootloader)
i cant root , unlock bootloader , or upgrade
tell me when u post that whole process ok?:good:
mohdyaz said:
ok , my fone works fine but jus theres no droidboot(bootloader)
i cant root , unlock bootloader , or upgrade
tell me when u post that whole process ok?:good:
Click to expand...
Click to collapse
I think he will explain detailed, so; if you don't understand his explaination, then we will talk
@ozank ok
@mohdyaz
http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
You Need From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which Is Not For The XT1766 if You Flash This You Will Loose The Baseband And SoftBrick The Phone .
And From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip This One Have The Ratio And Modem And FsG images Of Your Phone Thats Why We Need It .
Lets Begin , if You Have This Phone You Had Noticed That After Upgrade To The Last Version The Ability To Add Apn And Modify Them And The Hotspot Wont Work Any More This Is Because The Locked Everything Up For No Reason Well Money Is the Reason , We need to Extract XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in a folder and SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
in other folder , you must know your way to flash servicefile.xml on linux or windows no details here and bootloader unlocked , well that is easy , now we have to put the files : the 2 OEM files , the 4 System Files , boot.img ,
{{{ bootloader "NO NEED" This Work Before Just Because v48 and v56 have the same bootloader version }}} , recovey.img from SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip inside the folder that have the XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip firmware and replace those files , optional for rooting you can replace recovery.img with the Squid2 TWRP recovery.img file and The boot.img Patched Fixed F2FS kernel which is based in the stock firmware kernel sources that we are going to flash here and then flash supersu inside twrp , Well Thats It after Flashing This Downgrade Custom stock you will have back the ability to ADD apn's Again And Use The Hotspot included in the Stock Firmware , Cheers , Thanks To All The People Involved in the development for Perry Moto E4 Thanks Everybody i hope this help somebody with the XT1766. :laugh:
EDIT HELLO
Things Have Changed Dont Try To Downgrade Bootloader or The Phone Will Get Hard Bricked , Why well bootloader versions on new firmwares have been upgraded please check all the information on the Bootloader/Fastboot
MODE Of The Phone Which Version You Have , Now For Example If You Are On Version NCQS26.69-64-5 you will need SPERRY_SPRINT_NCQS26.69-64-5_cid50_XT1766-SS_7.1.1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml full package then extract and now you will need SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml extract it too , Now Just Move The 2 Oems Images And 4 System Images And Boot Image To SPERRY_SPRINT_NCQS26.69-64-5_cid50_XT1766-SS_7.1.1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml Folder Next Look for RSD_Lite_Motorola_XML_To_Batch_Script on Google Download it And Watch The Video Of Rootjunky on how to use it. Very Simple Wish All Of You Luck And im Not Responsible Of Any Damage Of Your Phone Use This Guide On Your Own Terms.
ozmage said:
You Need From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which Is Not For The XT1766 if You Flash This You Will Loose The Baseband And SoftBrick The Phone .
And From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip This One Have The Ratio And Modem And FsG images Of Your Phone Thats Why We Need It .
Lets Begin , if You Have This Phone You Had Noticed That After Upgrade To The Last Version The Ability To Add Apn And Modify Them And The Hotspot Wont Work Any More This Is Because The Locked Everything Up For No Reason Well Money Is the Reason , We need to Extract XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in a folder and SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
in other folder , you must know your way to flash servicefile.xml on linux or windows no details here and bootloader unlocked , well that is easy , now we have to put the files : the 2 OEM files , the 4 System Files , boot.img , bootloader , recovey.img from SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip inside the folder that have the XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip firmware and replace those files , optional for rooting you can replace recovery.img with the Squid2 TWRP recovery.img file and The boot.img Patched Fixed F2FS kernel which is based in the stock firmware kernel sources that we are going to flash here and then flash supersu inside twrp , Well Thats It after Flashing This Downgrade Custom stock you will have back the ability to ADD apn's Again And Use The Hotspot included in the Stock Firmware , Cheers , Thanks To All The People Involved in the development for Perry Moto E4 Thanks Everybody i hope this help somebody with the XT1766. :laugh:
Click to expand...
Click to collapse
I flashed the Sprint firmware and had data working on my XT1766 after it got it's carrier update, the Sprint firmware does not soft brick the phone as I flashed it and can confirm it doesn't soft brick it, so you are incorrect in saying that.
I'm not sure if I did something wrong but after trying this, my phone kept saying, "phone stopped working". I had backed up my phone so I restored it. Any ideas on what might have happened?
dlinderaz said:
I'm not sure if I did something wrong but after trying this, my phone kept saying, "phone stopped working". I had backed up my phone so I restored it. Any ideas on what might have happened?
Click to expand...
Click to collapse
Yeah, don't try to restore system apps. Phone app has some quirks, it's in oem. There are oem hide xml files and so on. Why try to restore phone?
madbat99 said:
Yeah, don't try to restore system apps. Phone app has some quirks, it's in oem. There are oem hide xml files and so on. Why try to restore phone?
Click to expand...
Click to collapse
I restored the entire thing after flashed the indicated files causing the error message.
dlinderaz said:
I restored the entire thing after flashed the indicated files causing the error message.
Click to expand...
Click to collapse
Oh, I never tried this method. I used rsd lite to flash the firmware (the one op says will brick you, it didn't by the way). After flashing new firmware I restored only data, nothing system or boot related, and have had no issues.
madbat99 said:
Oh, I never tried this method. I used rsd lite to flash the firmware (the one op says will brick you, it didn't by the way). After flashing new firmware I restored only data, nothing system or boot related, and have had no issues.
Click to expand...
Click to collapse
Thank you so much for the info. I'll give that a try tomorrow. I appreciate your time and help.
dlinderaz said:
Thank you so much for the info. I'll give that a try tomorrow. I appreciate your time and help.
Click to expand...
Click to collapse
Keep in mind I have the virgin mobile version (sprint xt1766). Don't know which one you have. Some have had trouble with rsdlite on Windows 10, it worked fine for me though.
I used rsdlite from here
The newest one, 6.2.4 I think
Apn Xt1766
I just want to add apn and want to use hot spot again
As the phone is updated on latest build ..
I don't want the root access..
What's should I try then from previous build , can anyone
Guide me easy steps plz.
Xt1766 how to get working apn
Will anyone confirm
danishamini.saifi said:
Will anyone confirm
Click to expand...
Click to collapse
The steps are there. Just don't use the root part if you don't want root. Once you switch the files, flash the service file.xml with rsdlite.
madbat99 said:
The steps are there. Just don't use the root part if you don't want root. Once you switch the files, flash the service file.xml with rsdlite.
Click to expand...
Click to collapse
Thanks, ill try and share the result.
I've tested it.. It worked for me but there is an issue
With this method occurred as well..
While Turing on the phone " BAD KEY" msg pops up on
Black display for 4-5 seconds and then mobile shows Motorola logo...
Now what is suppose to be done to get rid off BAD KEY msg.
danishamini.saifi said:
I've tested it.. It worked for me but there is an issue
With this method occurred as well..
While Turing on the phone " BAD KEY" msg pops up on
Black display for 4-5 seconds and then mobile shows Motorola logo...
Now what is suppose to be done to get rid off BAD KEY msg.
Click to expand...
Click to collapse
That's normal if you unlock the bootloader. Flash the no verity opt encrypt, or magisk, and it will change from bad key to n/a. But there will always be a message if you unlock the bootloader.
I know you said you don't need root, so that bad key message is there to stay.
madbat99 said:
That's normal if you unlock the bootloader. Flash the no verity opt encrypt, or magisk, and it will change from bad key to n/a. But there will always be a message if you unlock the bootloader.
I know you said you don't need root, so that bad key message is there to stay.
Click to expand...
Click to collapse
oh... i got it, thanks...
just one thing more please, if i go towards rooting the phone as well, will this be removed or N/A or something will be there?
danishamini.saifi said:
oh... i got it, thanks...
just one thing more please, if i go towards rooting the phone as well, will this be removed or N/A or something will be there?
Click to expand...
Click to collapse
N/A will be there. But you can flash a new boot logo to kinda hide it. Instead of a black screen, any logo you want, maybe with a white strip at the top to hide it. I'll get you a link.
Here are some good ones. https://forum.xda-developers.com/mo...om-boot-logos-converted-t3759320/post75787882
And here is the guide to make your own
https://forum.xda-developers.com/moto-e4/how-to/replace-n-boot-image-t3687212/post74118155
@madbat99
Everything you shared was perfect I made my own logo to hide bad key apn working ..
Now I want to have thebroot access in my phone XT1766..
TWRP IS ALREADY ISTALLED ON THE PHONE AS I AM FLASHING LOGOS..
WHAT SHOULD I INSTALLED TO GET ROOT ACCESS ..
SUPER USER ETC.. PLZ SHARE WITH ME..
and the main reason to have the root access is, I want to block or disable OTA update ..
Plz confirm, how will it be possible ..as I downgraded to get working APN But phone updated again now.
I want the phone to be stopped from being updated..
Plz help me out fixing this..
Thanks
danishamini.saifi said:
@madbat99
Everything you shared was perfect I made my own logo to hide bad key apn working ..
Now I want to have thebroot access in my phone XT1766..
TWRP IS ALREADY ISTALLED ON THE PHONE AS I AM FLASHING LOGOS..
WHAT SHOULD I INSTALLED TO GET ROOT ACCESS ..
SUPER USER ETC.. PLZ SHARE WITH ME..
and the main reason to have the root access is, I want to block or disable OTA update ..
Plz confirm, how will it be possible ..as I downgraded to get working APN But phone updated again now.
I want the phone to be stopped from being updated..
Plz help me out fixing this..
Thanks
Click to expand...
Click to collapse
Just don't accept the update. You can root by flashing magisk. You will still receive update notification. You'll need to disable the moto update app. I forget which one exactly. But your phone shouldn't be able to do ota updates once you are rooted with twrp installed. The update will fail.
here is the root thread.
madbat99 said:
Just don't accept the update. You can root by flashing magisk. You will still receive update notification. You'll need to disable the moto update app. I forget which one exactly. But your phone shouldn't be able to do ota updates once you are rooted with twrp installed. The update will fail.
here is the root thread.
Click to expand...
Click to collapse
Thank you. I wish I had known this. I had to flash the stock recovery, etc for the updates to work. A little bit of an unnecessary hastle.
dlinderaz said:
Thank you. I wish I had known this. I had to flash the stock recovery, etc for the updates to work. A little bit of an unnecessary hastle.
Click to expand...
Click to collapse
Ota updates will likely always fail if you have twrp, or have modified the system in any way. The ota performs many checks (assert props) to see if the system is clean. If any asserts fail, the ota will fail. Even restoring the stock recovery doesn't guarantee the ota will work.
Hi,
My phone is stuck at boot
error boot.img
keeps rebooting, unable to boot to recovery (can only access erecovery)
bootloader unlocked, frp locked
I tried using dload method to flash stock firmware but each time installation fails at 5% and I am not getting anywhere with it.
MODEL - BND-AL10
How can i recover my phone from this state? Please help!
lalitkhokhar said:
Hi,
My phone is stuck at boot
error boot.img
keeps rebooting, unable to boot to recovery (can only access erecovery)
bootloader unlocked, frp locked
I tried using dload method to flash stock firmware but each time installation fails at 5% and I am not getting anywhere with it.
MODEL - BND-AL10
How can i recover my phone from this state? Please help!
Click to expand...
Click to collapse
They did something different for dload on this phone.
It needs special firmware to dload
We found that service firmware for l21c432 will get the phone working again, then use hwota to restore correct region firmware
mrmazak said:
They did something different for dload on this phone.
It needs special firmware to dload
We found that service firmware for l21c432 will get the phone working again, then use hwota to restore correct region firmware
Click to expand...
Click to collapse
what is hwota?
will i need to keep all files in dload folder or just the update.app?
is service firmware same as the full ota which is found on Firmware finder?
and there are two type of full ota FullOTA-MF and FullOTA-MF-PV which one should i download
lalitkhokhar said:
what is hwota?
will i need to keep all files in dload folder or just the update.app?
is service firmware same as the full ota which is found on Firmware finder?
and there are two type of full ota FullOTA-MF and FullOTA-MF-PV which one should i download
Click to expand...
Click to collapse
Service rom is different then fullOTA.
From the screenshot you have . The fullota-mf-pv examples are Oreo and the ones without the pv are nougat.
This separation is not allways Oreo/ nougat, but only in your example.
HWOTA is a method to force install fullOTA files that uses a modified stock recovery that bypasses version verifications.
Here is link.--( there is other hwota too. One that has more batch file script and incorporate bootloader unlock and device rebranding. )
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
And service rom was found on rusian site 4pda.
The file download there has reached a download limit and forces you to sign up for a Yandex account. I copied the service rom to Android file host.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
mrmazak said:
Service rom is different then fullOTA.
From the screenshot you have . The fullota-mf-pv examples are Oreo and the ones without the pv are nougat.
This separation is not allways Oreo/ nougat, but only in your example.
HWOTA is a method to force install fullOTA files that uses a modified stock recovery that bypasses version verifications.
Here is link.--( there is other hwota too. One that has more batch file script and incorporate bootloader unlock and device rebranding. )
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
And service rom was found on rusian site 4pda.
The file download there has reached a download limit and forces you to sign up for a Yandex account. I copied the service rom to Android file host.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Click to expand...
Click to collapse
thank you! I will try this.
@mrmazak Thank you very much! L21 firmware worked and I am running it without any issue.
What difference does it make as now I am using BND-L21 firmware instead of BND-AL10?
Acc. to me this Rom is better as there are very few bloatware installed as compared to AL10 and everything seems to work fine.
In About Phone only things changed are-
Build number
Baseband Version
Model and imei are same as before.
Does i really need to install AL-10 firmware again?
lalitkhokhar said:
@mrmazak Thank you very much! L21 firmware worked and I am running it without any issue.
What difference does it make as now I am using BND-L21 firmware instead of BND-AL10?
Acc. to me this Rom is better as there are very few bloatware installed as compared to AL10 and everything seems to work fine.
In About Phone only things changed are-
Build number
Baseband Version
Model and imei are same as before.
Does i really need to install AL-10 firmware again?
Click to expand...
Click to collapse
As long as the phone is working normally, I think you should be fine . But further updates will , of course, need to be manually done . Like this install was.
mrmazak said:
Service rom is different then fullOTA.
From the screenshot you have . The fullota-mf-pv examples are Oreo and the ones without the pv are nougat.
This separation is not allways Oreo/ nougat, but only in your example.
HWOTA is a method to force install fullOTA files that uses a modified stock recovery that bypasses version verifications.
Here is link.--( there is other hwota too. One that has more batch file script and incorporate bootloader unlock and device rebranding. )
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
And service rom was found on rusian site 4pda.
The file download there has reached a download limit and forces you to sign up for a Yandex account. I copied the service rom to Android file host.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Click to expand...
Click to collapse
Restored my phone using the service firmware but the "OEM Unlock" option in the Developer Options is completely missing. Is there a fix for this?
XandeR180 said:
Restored my phone using the service firmware but the "OEM Unlock" option in the Developer Options is completely missing. Is there a fix for this?
Click to expand...
Click to collapse
Never saw that before, unless your phone in C00 or C01 (China region)
Try factory reset?
Then skip wifi and Google account, but set a lock screen pin or pattern. See if that helps.
Then share screenshot of "about phone". Block out imei number though.
Also which service ROM did you use. How did you use it. Did you change method from as described, did it flash both parts? The update and hw_update?
mrmazak said:
Never saw that before, unless your phone in C00 or C01 (China region)
Try factory reset?
Then skip wifi and Google account, but set a lock screen pin or pattern. See if that helps.
Then share screenshot of "about phone". Block out imei number though.
Also which service ROM did you use. How did you use it. Did you change method from as described, did it flash both parts? The update and hw_update?
Click to expand...
Click to collapse
Actually, my phone is a BND-L34 (Mate SE)
Performed a factory reset 3 times. Third time I set up a pattern but the option still hasn't appeared.
I used the ROM in the link you provided in your previous post (had no idea there were any others, as I haven't been able to find anything else).
Didn't change anything. Extracted the dload folder to my external SD card, powered on while holding all three buttons and the update itself went just fine. Also I'm not sure how to tell whether or not it flashed both parts.
Everything else SEEMS to be working. Haven't poked around or anything, nor have I tried my SIM card. However the only issue I'm coming across (that I actually care about at the moment) is the inability to enable OEM unlocking (not grayed out or anything. It's just completely missing).
Pictures below.
XandeR180 said:
Actually, my phone is a BND-L34 (Mate SE)
Performed a factory reset 3 times. Third time I set up a pattern but the option still hasn't appeared.
I used the ROM in the link you provided in your previous post (had no idea there were any others, as I haven't been able to find anything else).
Didn't change anything. Extracted the dload folder to my external SD card, powered on while holding all three buttons and the update itself went just fine. Also I'm not sure how to tell whether or not it flashed both parts.
Everything else SEEMS to be working. Haven't poked around or anything, nor have I tried my SIM card. However the only issue I'm coming across (that I actually care about at the moment) is the inability to enable OEM unlocking (not grayed out or anything. It's just completely missing).
Pictures below.
Click to expand...
Click to collapse
The system number ending in .046 is clue that the second part of service ROM did not load.
Before worrying about the oem toggle too much. Does the boooader screen show frp locked?
mrmazak said:
The system number ending in .046 is clue that the second part of service ROM did not load.
Before worrying about the oem toggle too much. Does the boooader screen show frp locked?
Click to expand...
Click to collapse
Nope. It just says "PHONE locked". Weird, I could've sworn it said frp locked the first time I went into fastboot
XandeR180 said:
Nope. It just says "PHONE locked". Weird, I could've sworn it said frp locked the first time I went into fastboot
Click to expand...
Click to collapse
Alright, oem unlock should work.
Then after the reset and boot up , back to fastboot to flash TWRP.
Then use hwota, and best to go with probably b330,
mrmazak said:
Alright, oem unlock should work.
Then after the reset and boot up , back to fastboot to flash TWRP.
Then use hwota, and best to go with probably b330,
Click to expand...
Click to collapse
WOW it actually worked!! I'm amazed that it was that simple. Thank you so much. I'll follow your HWOTA guide and keep you posted if anything goes wrong :good:
XandeR180 said:
WOW it actually worked!! I'm amazed that it was that simple. Thank you so much. I'll follow your HWOTA guide and keep you posted if anything goes wrong :good:
Click to expand...
Click to collapse
I did see one time the issue with unknown model and strange build number. And hwota did not help going from emui 8 to emui 8. But downgradeing from emui 8 to emui 5 fixed it. Then update back to 8 went normal
mrmazak said:
I did see one time the issue with unknown model and strange build number. And hwota did not help going from emui 8 to emui 8. But downgradeing from emui 8 to emui 5 fixed it. Then update back to 8 went normal
Click to expand...
Click to collapse
Actually, installing the update files for emui 8 while on emui 8 worked perfectly! At least I think. Everything looks normal so far, even the model number and build number
XandeR180 said:
Actually, installing the update files for emui 8 while on emui 8 worked perfectly! At least I think. Everything looks normal so far, even the model number and build number
Click to expand...
Click to collapse
Sounds good.
So now let me ask what was the issue you had to recover from. And I assume you had the unlock code already?
I ask because yesterday I was helping someone , also with mate se. They are trying to get uock code from DC unlock, but need to downgrade first. I had guided a downgrade this way before to get unlock codes , and it went just fine. But when you had the unknown model number, it makes me wonder what caused it, and of it could be avoided for the guy I'm helping now.
mrmazak said:
Sounds good.
So now let me ask what was the issue you had to recover from. And I assume you had the unlock code already?
I ask because yesterday I was helping someone , also with mate se. They are trying to get uock code from DC unlock, but need to downgrade first. I had guided a downgrade this way before to get unlock codes , and it went just fine. But when you had the unknown model number, it makes me wonder what caused it, and of it could be avoided for the guy I'm helping now.
Click to expand...
Click to collapse
As much as I would love to help, I really don't know what caused the unknown model number.
The reason I needed to restore my phone was because I had originally gotten the Oreo update through firmware finder because I never officially got the OTA (even though my IMEI was approved according to FF). The update seemed to have worked alright but one day my camera suddenly stopped functioning completely. Reboot didn't fix it. So I decided to factory reset it but that only ended in a bootloop.
I could have used TWRP to fix it but for some reason it would not boot into TWRP, so I opted for triggering an OTA installation through stock recovery but that didn't work (this was before I knew of the service ROM). So then I tried reflashing TWRP but I couldn't because I forgot to enable USB debugging. I knew I was done for at that point. And stupid me added to the problem by relocking the bootloader (I don't remember why I decided to do that).
So I hadn't touched the thing in months up until today to see if there was any new methods for restoring a bricked device. That's when I found some threads pointing towards a service ROM. And here I am.
Sorry that I couldn't provide any specific details. Some things I just forgot and some things I don't even know the cause of (like the camera malfunctioning and the bootloop after factory resetting).
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
well it happened to me same the only way is to take it to realme service center or finde some one who have the oppo realme server to flash it like i did ifound a guy who have an official server the flash my device am from algeria
Update
Irvinukis said:
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
Click to expand...
Click to collapse
i´ve been "searching" (not too much to be honest) a way to flash my device, or even easier, to unlock the bootloader, once that is done, i will be able to do the next thing.
There are ways to "force" flashing modifying the hardware (i really don't want to that), other places suggest flashing a vbmeta.img, but i get back to the same, i need the bootloader
im actualy downloading UFI android tool, any update i will post it
Irvinukis said:
i´ve been "searching" (not too much to be honest) a way to flash my device, or even easier, to unlock the bootloader, once that is done, i will be able to do the next thing.
There are ways to "force" flashing modifying the hardware (i really don't want to that), other places suggest flashing a vbmeta.img, but i get back to the same, i need the bootloader
im actualy downloading UFI android tool, any update i will post it
Click to expand...
Click to collapse
well, my research and asking lead me to teh JIG usb to force the download mode, but i need to build it, does anyone have experience with this?
Firstly u need to flash twrp with adb and then use twrp to flash the rom. Then wipe and clean cache and you are done
eni_pog said:
Firstly u need to flash twrp with adb and then use twrp to flash the rom. Then wipe and clean cache and you are done
Click to expand...
Click to collapse
How can i do that with the bootloader blocked?
Can u explain me please?
The solution may be QFI and EMMC download tool, if unbrick the device i'll post a guide
i made a EDL cable that i'm gonna use to try, i don't even know if the device have that mode, i'm actually searching a micro usb to type c usb to try
Irvinukis said:
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
Click to expand...
Click to collapse
I think EDL mode flashing stock ROM is a good way, but is there compatible download tool or image? I have ever used Miflash to downgrade my bootloader locked Xiaomi 4c for unlocking bootloader in EDL mode (maybe "fasboot oem edl" ,"fastboot reboot-edl", or "fastboot reboot edl" command).
Unlocking the Mi4c Bootloader: https://forum.xda-developers.com/mi-4c/general/guide-unlocking-mi4c-bl-verification-t3336779
Miflash guide: https://xiaomi.eu/community/threads/miui-10-developer-rom-8-9-13-with-miflash.47542/
Did you get the solution same problem
Well let me explain this question, i bought this device in aliexpress cause i live in mexico, so, my device version is the chinese (this for the network compatibility).
when the new software version roll out i downloaded in the realme web i tried to install it. But i was not able to, so i unlocked the bootloader to try some custom roms, i install the recovery TWRP , and then i downloaded the pixwel experience, before installing i checked and the realme ui update was released, so i tried to install it, but i couldn't cause i had the bootloader unlocked and the custom recovery.
Next thing i did was install the stock recovery, and then i locked again the bootloader, but now the cellphone dont start, it only shows the screen of "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it" .
The problem here is, the recovery dont start and the fastboot its locked and i can't bypass that.
I'm looking for a solution, but i want to know if anyone have solve this before or have any idea to do it. Thanks guys!
did u get the solution bro
Not yet, i have some steps to do it, but now im facing the last step, the file don´t get recognized by the tool, this tool ask for a scatter file, and the one with QFIL, i need a xml firehose fle, and i havent found it
did u get the solution bro[/QUOTE]
What i got is this:
Emergency download: press vol + and vol - then connect it to the pc, the pc will recognize it as port 9008 com in the device manager of your pc, if yor phone reboots u have to disconnect the battery cause the battery forces the reboot of the EDL mode, maybe if you put the phone on EDL mode an then quickly flash would work with out tearing appart the device
Files: you need to install qualcomm drivers (https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/), download the .ofp file of your device (i get if from here https://oppostockrom.com/oppo-realme-x-rmx1901 ), then you need to download the tool you will use
here is where things are gonna get a bit harder
MSMDownload: this is the official tool, it came withe ofp file from the link i put before, the proble is you need a user and password, i haven't found where to get one official, its from oppo workers i guess
There is a cracked version, but don't recognizes the file
QFIL: its for qualcom devices (found it here https://androidmtk.com/download-qualcomm-flash-image-loader-qfil), this will let you flash every qualcomm device (or thats what they tell you), it shows the port, but ask for a xml file and a programer path (thing that i haven't found it yet)
Cracked MSMDownload: i found this https://www.techoxygen.com/msm-download-tool/ , https://romprovider.com/2020/02/flash-qualcomm-devices-using-msm-download-tools/, or this https://www.youtube.com/watch?v=0CKsEOfGGaQ
now, in my case the file its not recognized, it says incorrect scatter file, from here you can start diggin around, if you solve this please let me know
What i got is this:
Emergency download: press vol + and vol - then connect it to the pc said:
https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/),[/url] download the .ofp file of your device (i get if from here https://oppostockrom.com/oppo-realme-x-rmx1901 ), then you need to download the tool you will use
here is where things are gonna get a bit harder
MSMDownload: this is the official tool, it came withe ofp file from the link i put before, the proble is you need a user and password, i haven't found where to get one official, its from oppo workers i guess
There is a cracked version, but don't recognizes the file
QFIL: its for qualcom devices (found it here https://androidmtk.com/download-qualcomm-flash-image-loader-qfil), this will let you flash every qualcomm device (or thats what they tell you), it shows the port, but ask for a xml file and a programer path (thing that i haven't found it yet)
Cracked MSMDownload: i found this https://www.techoxygen.com/msm-download-tool/ , https://romprovider.com/2020/02/flash-qualcomm-devices-using-msm-download-tools/, or this
now, in my case the file its not recognized, it says incorrect scatter file, from here you can start diggin around, if you solve this please let me know
Click to expand...
Click to collapse
Hi man , did you try this method?
devilkar said:
Hi man , did you try this method?
Click to expand...
Click to collapse
yeah, i tried, but my bootloader its blocked
zaki789 said:
well it happened to me same the only way is to take it to realme service center or finde some one who have the oppo realme server to flash it like i did ifound a guy who have an official server the flash my device am from algeria
Click to expand...
Click to collapse
Hi bro i from algeria too can you tell where you flashed your phone, please adresse phone number any help, thank you