my galaxy A500F stuck in boot loading after I tried to flash with lineage 14.1 rom by twrp.
now my phone says 'karnel is not seandroid enforcing Set warranty bit :karnel '
after 3/4 hours nothing happened so I tried to go to system recovery mode but its not opening
then tried to flash with official rom but it keep failing
even my device model got changed from A500F to A5000
can't go further or backward, what can I do?
tnx in advance for help :crying:
where is it failing when trying to reflash official rom .. sboot.bin ? ? are you using latest odin to reflash stock rom ? does odin detect your phone ? you might need to flash a newer official rom if bootloader is newer than the one in the firmware your trying to flash.
is there no board for the 2015 A5 ? i think here is only 2017
Related
hi,
i have note 2 n7100 ,its system status modified, so i cnt get OTA update
i manual update this by ODION 3.10 stock firmwares from sammobile.
each n evry thing work fine
odion passed my fone and reboot than its stuck in rbooting/restarting"samsung gtn 7100" logo
i tried other country firmware result same
in recovery rest factry setting/wipe cache done same result
i think now some kernl flash or other method should use any body help me plz soon soon
do a clean install. flash twrp, then root and flash rom. there are no miracles, it's just elecyronic parts
how to flash twrp and root agin
whn ur set is not on than how t root
dhullikhan said:
how to flash twrp and root agin
whn ur set is not on than how t root
Click to expand...
Click to collapse
i do al step and flash stock rom but resul same
pro blem solved by my self i upgrading 4.4 thats why problem when i downgrade 4.3 than its works like chorm
Hello, i have a SM-G920P model, its on a boot loop with the message on the top in red:
KERNEL ITS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
factory reset using the stock recovery and its the same.
i downloaded the latest firmware from sammobile and tried to flash it with odin 3. but odin always gets stuck on "Nand Write Start!!".. and doesnt do nothing for hours. i also tried an older version of Odin (1.3) and its stuck also on the flash. also tried to flash custom recovery..
i read somewere that using kies "fimware upgrade and initialization" works.. kies said that my phone was no supported, but the tool did accepted my phone model, but not my serial no. located on the back of phone (in odin mode is the same number). if somebody have the same model can give me their s/n so kies can download the firmware and i can flash using kies.
or does somebody know any good tricks i can do??
thanks
I need help too!
Robert4321 said:
Hello, i have a SM-G920P model, its on a boot loop with the message on the top in red:
KERNEL ITS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
factory reset using the stock recovery and its the same.
i downloaded the latest firmware from sammobile and tried to flash it with odin 3. but odin always gets stuck on "Nand Write Start!!".. and doesnt do nothing for hours. i also tried an older version of Odin (1.3) and its stuck also on the flash. also tried to flash custom recovery..
i read somewere that using kies "fimware upgrade and initialization" works.. kies said that my phone was no supported, but the tool did accepted my phone model, but not my serial no. located on the back of phone (in odin mode is the same number). if somebody have the same model can give me their s/n so kies can download the firmware and i can flash using kies.
or does somebody know any good tricks i can do??
thanks
Click to expand...
Click to collapse
I'm having this same problem, does anyone have a solution?
d'veldt said:
I'm having this same problem, does anyone have a solution?
Click to expand...
Click to collapse
Yes, use Odin to install the latest stock ROM. There are numerous threads right here explaining how to do this and providing links. But....
Download Odin from here: http://www.samsungodindownload.com/
Download the latest stock: https://www.androidfilehost.com/?fid=24343351889231947
Follow this: https://www.youtube.com/watch?v=tv0BnfpNxEs
Dude! You are a lifesaver! Thanks
I have a Samsung Galaxy J2 (SM-J200M) Region: TTT stuck on a bootloop.
I believe it's soft bricked, but can access Download Mode, but not Recovery mode.
In Download Mode, it shows SM-J200M; Custom Binary: Samsung Official, System Status: Custom, FRP Lock: On; Secure Download: Enabled, and Knox Warantee Void: 0 (0x0000).
I cannot get into recovery mode to wipe data/factory reset. I have flashed different firmwares of SM-J200M. Some failed, some passed, but ultimately, I flashed the original stock firmware of the phone still with no luck. I'm beginning to think it's the System Status that has something to do with it. I know that when I flash the wrong firmware, it will show custom. But it shows System Status as Custom even with stock firmware. Please help.
Note: I have tried Emergency Recovery with Samsung Kies with no luck. I've unlocked bootloader using ADB Enabler to try to flash TWRP and try to have a recovery option, I've tried to take out the battery for 5min. and then reflash the stock firmware and still have no luck. Just the boot up screen with only Download Mode available when holding down combination buttons. Fastboot won't recognize the phone.
Out of 54 views, I have no response. I would just like to know if there's any hope for this device to be used or not. Thanks guys.
Hello there.
You might be able to unbrick using ODIN and flash the stock firmware.
Stock firmware is here: "https://boycracked.com/2016/04/01/official-samsung-galaxy-j2-sm-j200m-stock-rom-firmware/"
Look for your phones region and then click the DOWNLOAD button
To get ODIN, well, you just google ODIN
Once you have got the stock firmware(should be a .md5 file)
Boot your device in DOWNLOAD MODE
Plug the device into your PC
Then... Open ODIN, click on the big button that says AP, and locate your stock firmware
Click on start!
Hope I helped :good:
Naton670 said:
I have a Samsung Galaxy J2 (SM-J200M) Region: TTT stuck on a bootloop.
I believe it's soft bricked, but can access Download Mode, but not Recovery mode.
In Download Mode, it shows SM-J200M; Custom Binary: Samsung Official, System Status: Custom, FRP Lock: On; Secure Download: Enabled, and Knox Warantee Void: 0 (0x0000).
I cannot get into recovery mode to wipe data/factory reset. I have flashed different firmwares of SM-J200M. Some failed, some passed, but ultimately, I flashed the original stock firmware of the phone still with no luck. I'm beginning to think it's the System Status that has something to do with it. I know that when I flash the wrong firmware, it will show custom. But it shows System Status as Custom even with stock firmware. Please help.
Note: I have tried Emergency Recovery with Samsung Kies with no luck. I've unlocked bootloader using ADB Enabler to try to flash TWRP and try to have a recovery option, I've tried to take out the battery for 5min. and then reflash the stock firmware and still have no luck. Just the boot up screen with only Download Mode available when holding down combination buttons. Fastboot won't recognize the phone.
Click to expand...
Click to collapse
Suggest you look for the correct firmware on updato: Link
Try to also flash TWRP see if you can manage to boot into recovery by some miracle and wipe everything
ShaDisNX255 said:
Suggest you look for the correct firmware on updato: Link
Try to also flash TWRP see if you can manage to boot into recovery by some miracle and wipe everything
Click to expand...
Click to collapse
I have flashed the correct firmware from the exact region by using kies firmware upgrade and seeing what the region is cause it teeells you what firmware it downloads based on the serial # then i downloaded it manually and flashed via Odin. I also flashed twrp for j200m latest i believe is 3.0.0.1 or someting or 3.1.1 I forget but they failed. I can't figure out the issue here. All I know is the system status is custom even after flashing original stock firmware when it should say offical and still stuck on the J2 logo. Any idea why that is.?
Naton670 said:
I have flashed the correct firmware from the exact region by using kies firmware upgrade and seeing what the region is cause it teeells you what firmware it downloads based on the serial # then i downloaded it manually and flashed via Odin. I also flashed twrp for j200m latest i believe is 3.0.0.1 or someting or 3.1.1 I forget but they failed. I can't figure out the issue here. All I know is the system status is custom even after flashing original stock firmware when it should say offical and still stuck on the J2 logo. Any idea why that is.?
Click to expand...
Click to collapse
According to your post FRP Lock is ON. Your system status is custom. This is what's causing the bootloop.
It's unlikely you are flashing the correct firmware if the system status is still custom. Yes this can happen even with official Samsung firmware if it isn't 100% correct.
How did you actually end up in this predicament?
I would also ask you post your exact model details and a link to the firmware you have attempted to flash and if possible a screenshot or post the output of the flash with ODIN.
Hi there !
i'm new here at xda forums, i have a serious problem
i have flashed TimEm Rom v2 in my galaxy j200f (J2 2015)
it didn't work so i tried to flash lineage v14 nougat and also didn't work :crying:
when i wanted to reflash the original firmware by samsung from sammobile it shows me some kind of bulls**t
when i flashed the firmware with odin and i rebooted my device it shows me erasing with the android logo and dosent boot, i think its some kind of virus cuz twrp shows me that no OS is installed (i can access download mode and recovery) i dont know what to do i tried to flash the original firmware 100 times
Please Help !
Hey (newbie here also.) I suggest you need to flash your original firmware via download mode.
Hi, community
I tried to root my SM G-9600 but it all went wrong. First i went on twrp, it worked, but wiped my entire data. Then i tried make a factory reset o installation with odin and the latest firmware for my device, but it failed and showed this message labeled in red color: "sw rev check fail device 4 binary 3 error". then i found in this and other forums that it was because i used not the latest firmware. I downloaded the latest one, tried once to flash it via ODIN, and it failed again. Then when it restarted this message was shown : " An error has occurred while updating the devide software. Use the Emergency recovery function in the Smart Switch PC software. I donwloaded the smart switch, installed it, plugged my devide, but it shown that my device was "Unsupported". IDK what to do by now, so i need help from anyone on this forum. PLS
Greeting from Peru.
i had the same problem
(before processing to the next step try to redownload the firmware, i think i was using an old firmware and this is why i got this error)
i am assuming that you can not boot on twrp recovery
that's not a problem , you need to install twrp via odin and boot directly to it....
format the data and connect to your laptop (if it does recognize the phone but there is no storage dont worry, just reboot again to recovery (there is an option on reboot tab))
since you already tripped the knox just flash a custom rom, boot and set it up, and then try to flash stock image via odin as normal.
and sorry for my bad english.
Cant install a custom rom
Thanks. I made posible the TWRP installation, root, but i cannot install any custom rom i have. Can you suggest any one that will be suitable for my device (SM G-9600) ?, thats Samsung Galaxy S9 g9600 (Snapdragon SoC)
dimitrispas22 said:
i had the same problem
(before processing to the next step try to redownload the firmware, i think i was using an old firmware and this is why i got this error)
i am assuming that you can not boot on twrp recovery
that's not a problem , you need to install twrp via odin and boot directly to it....
format the data and connect to your laptop (if it does recognize the phone but there is no storage dont worry, just reboot again to recovery (there is an option on reboot tab))
since you already tripped the knox just flash a custom rom, boot and set it up, and then try to flash stock image via odin as normal.
and sorry for my bad english.
Click to expand...
Click to collapse
Thanks. I made posible the TWRP installation, root, but i cannot install any custom rom i have. Can you suggest any one that will be suitable for my device (SM G-9600) ?, thats Samsung Galaxy S9 g9600 (Snapdragon SoC)
Stevie1997 said:
Thanks. I made posible the TWRP installation, root, but i cannot install any custom rom i have. Can you suggest any one that will be suitable for my device (SM G-9600) ?, thats Samsung Galaxy S9 g9600 (Snapdragon SoC)
Click to expand...
Click to collapse
do you want to install a custom rom or revert back to stock?
For custom ROM I suggest Soldiers ROM here's the link to the thread. https://forum.xda-developers.com/ga...g96xf-fd-n-stock-rom-soldier9312-1-0-t3771346 . You can more information about it on the thread. Been using the moment I rooted my phone.
Xspidera said:
For custom ROM I suggest Soldiers ROM here's the link to the thread. https://forum.xda-developers.com/ga...g96xf-fd-n-stock-rom-soldier9312-1-0-t3771346 . You can more information about it on the thread. Been using the moment I rooted my phone.
Click to expand...
Click to collapse
i think he is out of lack it looks like he doesn't know exactly his model snapdragon samsung devices are different from our g960f exynos version and it may brick his device
i think hes only option is to flash the stock firmware and yea just that....