Develop Bugs

MIUI 10 Update. Questionen.

Hello,
I heard about a new Miui Version. Can i update without Data loss?
Maybe there is an OTA link anderen i do not lose any Data.
Is it possible?
An If, is my updated phone as quick as when i so Clean full new Installation?
Thank you!

http://bigota.d.miui.com/V10.0.1.0....roGlobal_V10.0.1.0.OEIMIFH_98721c9743_8.1.zip
this is the download link
i am going to flash it via twrp! (from Omnirom) so my internal storage is not Encrypted!
but if you are coming from miui9.6.4 etc then chances are your DATA partition is encrypted and twrp might not able to flash the flashrom (link given above)
however ! i bought on RN5p on 9.6.3 when OTA came, i downloaded and flashed it via twrp to 9.6.4 , that time i didnt face any encryption error!
encryption is mostly set in place when you enable screen pattern with fingerprint sensor! (even if you remove it later on, the partition stays encrypted and twrp wont able to flash recoveryrom!
then only oneoption
either save this file as UPDATE.zip and flash it via updater (miui's own recovery-image)
or download the FASTBOOT VERSION of miui 10 and make it via MIflasher! (you will loose all data )
also you may flash REDWOLF recovery, it has power to wipe partitions for RN5pro after asking for decryption pattern from you (as password) , i flashed RR and OMni last time via redwolf recovery after giving correct pattern while wiping /data /system /vendor partitions!

OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)

YasuHamed said:
http://bigota.d.miui.com/V10.0.1.0....roGlobal_V10.0.1.0.OEIMIFH_98721c9743_8.1.zip
this is the download link
i am going to flash it via twrp! (from Omnirom) so my internal storage is not Encrypted!
but if you are coming from miui9.6.4 etc then chances are your DATA partition is encrypted and twrp might not able to flash the flashrom (link given above)
however ! i bought on RN5p on 9.6.3 when OTA came, i downloaded and flashed it via twrp to 9.6.4 , that time i didnt face any encryption error!
encryption is mostly set in place when you enable screen pattern with fingerprint sensor! (even if you remove it later on, the partition stays encrypted and twrp wont able to flash recoveryrom!
then only oneoption
either save this file as UPDATE.zip and flash it via updater (miui's own recovery-image)
or download the FASTBOOT VERSION of miui 10 and make it via MIflasher! (you will loose all data )
also you may flash REDWOLF recovery, it has power to wipe partitions for RN5pro after asking for decryption pattern from you (as password) , i flashed RR and OMni last time via redwolf recovery after giving correct pattern while wiping /data /system /vendor partitions!
Click to expand...
Click to collapse
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
Do you know it?

I use this Zip with official miui update. No pb. Data not erase.

OK, do you have a Link?
How did you Update?
With official updater on Phone?

Check link before
My phone is locked, no Root. Global version (french)
Previous version : 9.6.4
Update with original updater miui : Menu, select update ...

haRICOdroid said:
Check link before
My phone is locked, no Root. Global version (french)
Previous version : 9.6.4
Update with original updater miui : Menu, select update ...
Click to expand...
Click to collapse
OK thank you.
And this is for global Version?
Not Indian?

manuelbvb said:
OK thank you.
And this is for global Version?
Not Indian?
Click to expand...
Click to collapse
There is no indian version. Its all whyred. There is only china/global.

OK, and i heard the Update has stopped because of problems and now there is a new 10.0.2.0 version instead of 10.0.1.0.
Is this right?
If yes, i will wait to Update.

manuelbvb said:
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
Click to expand...
Click to collapse
1. try with twrp , or redwolf (wiping partitions (accept internal storage) , if it wipes successfully then OK, flash the miui10
2. if it gives error then boot into miui 9.x.x and save the miui10 file as update.zip in internal storage Download folder and open updater and call that update as "update from zip file" and try to do that
REMEMBER! REDMI NOTE 5Pro has code 4 ANTI ROLLBAK ENABLED!
if miui flashing change that anti rolback code to 5, then YOU CAN NEVER DOWNGRADE to MIUI9, if you try! you will FRY your motherboard
you can check your status
connect RN5p in fastboot mode, open minimal adb & Fastboot, and type
fastboot getvar anti
and enter
if it shows 3 then you are OK , but if it shows 4 then you can never flash any MIUI rom which came older days!
so be sure! plz ! read log of miui10
---------- Post added at 09:49 PM ---------- Previous post was at 09:49 PM ----------
manuelbvb said:
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
Do you know it?
Click to expand...
Click to collapse
me too!

manuelbvb said:
OK, and i heard the Update has stopped because of problems and now there is a new 10.0.2.0 version instead of 10.0.1.0.
Is this right?
If yes, i will wait to Update.
Click to expand...
Click to collapse
And what about this?
Is 10.0.1.0 the newest Version for whyred? Or is there a new one because of bugs?

manuelbvb said:
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
Do you know it?
Click to expand...
Click to collapse
you won't loose any data! dont worry

OK thank you.
But is the 10.0.1.0 the newest Update? Because there is 10.0.2.0
Maybe they stopped update because of issues and then i dont want 10.0.1.0

manuelbvb said:
OK thank you.
But is the 10.0.1.0 the newest Update? Because there is 10.0.2.0
Maybe they stopped update because of issues and then i dont want 10.0.1.0
Click to expand...
Click to collapse
Haven't heard of 10.0.2 or of any problems with 10.0.1 which is what I'm on (global version handset)
Sent from mobile

manuelbvb said:
OK thank you.
But is the 10.0.1.0 the newest Update? Because there is 10.0.2.0
Maybe they stopped update because of issues and then i dont want 10.0.1.0
Click to expand...
Click to collapse
Okay so did you have try to update with this method ?
I have a Redmi Note 5 Whyred but when I have unlock my phone I wanted to install Xposed (in the STOCK ROM) and after the reboot... Bootloop and I have download an flashable ROM file .zip from the official Xiaomi website but now I don't know if I have install the wrong version or if the root may be corrupt something but my update software don't found the Miui 10 update but other people already have Miui 10 without ROOT with the official method (start the update app and download Miui10) so I don't know if this is a good idea to download this ZIP and use it in the update software. So i want to know if :
-i will lose data if I do this update like this ?
-the update software will work after the update in Miui10 ?
Thank you for you answer (AND NO I DON'T WANT TO USE THE BACKUP APP BECAUSE COPY APK DON'T COPY APP DATA !!!)
---------- Post added at 04:36 PM ---------- Previous post was at 04:35 PM ----------
manuelbvb said:
OK thank you.
But is the 10.0.1.0 the newest Update? Because there is 10.0.2.0
Maybe they stopped update because of issues and then i dont want 10.0.1.0
Click to expand...
Click to collapse
Okay so did you have try to update with this method ?
I have a Redmi Note 5 Whyred but when I have unlock my phone I wanted to install Xposed (in the STOCK ROM) and after the reboot... Bootloop and I have download an flashable ROM file .zip from the official Xiaomi website but now I don't know if I have install the wrong version or if the root may be corrupt something but my update software don't found the Miui 10 update but other people already have Miui 10 without ROOT with the official method (start the update app and download Miui10) so I don't know if this is a good idea to download this ZIP and use it in the update software. So i want to know if :
-i will lose data if I do this update like this ?
-the update software will work after the update in Miui10 ?
Thank you for you answer (AND NO I DON'T WANT TO USE THE BACKUP APP BECAUSE COPY APK DON'T COPY APP DATA !!!)

[GUIDE] How to change China ROM to Global ROM. TWRP and more...

Please leave "Thanks" if this thread helped you.
________________________________________
LEGEND :
(RECOVERY) : ZIP FILE FLASHED via TWRP
(FASTBOOT) : .IMG FILES FLASHED via MiFLASH
(TWRP) : Recovery .IMG file flashed via Fastboot
________________________________________
OTHER USEFULL FILES FOUND :
MIUIPRO.NET MIUI 11 9.10.10 ( RECOVERY ) : https://mega.nz/#!M8hXEYAC!e6BxOr5HngCmfNSCOo4ZVmkTKgkU8KUheaOkrKAOHyo
MIUIPRO.NET TWRP : https://mega.nz/#!004lWKjD!V2ZAWBv9zjMaNISkOAnuUlBzzet1QFIsEXFHBVFlaoM
________________________________________
Prequisites :
FASTBOOT + RECOVERY+BOOT : https://mega.nz/#!kpx2wIbY!sxWOxoRGjXribkqMuNSjJCIk94bhrf4M5MSdWpztspE
MiFLASH for REDMI NOTE 8 PRO : https://mega.nz/#!RpxkzSoK!UunxanbaWOkPVYq_NAJakWbc2D0lDygPuTNCc-OO2Og
LATEST EEA ( GLOBAL ) REDMI NOTE 8 PRO FIRMWARE : https://mega.nz/#!p8RDiCRB!2lSEAbtV364L61ZXd_tfAbs53AlsRjmQWa53JRE9BoU
________________________________________
1. Unlock bootloader.
2. Open the MiFLASH, and connect your phone via USB in Fastboot mode.
3. Your phone should be on the list of connected devices.
4. Click on "Browse" -> "Advenced|" and localize file : flash_all_except_data_storage.bat from downloaded FIRMWARE folder.
5. Click FLASH and wait patiently.
6. Phone will Reboot and wait patiently.
7. DONE
________________________________________
Q&A
Does TWRP from that chinese forum presist after flashing ?
No. Phone will go back to original RECOVERY after 2nd restart.
Does that TWRP is functional with REDMI NOTE 8 PRO ?
Some functions may work, some not.
Installing root with this TWRP will cause bootloop.
When something go wrong....
If you end up with BOOTLOOP, for any reason ( Magisk etc. )
Just flash boot.img from FASTBOOT + RECOVERY+BOOT and bring your phone back to life.
This boot.img was extracted from firmware linked above.
_____
Command : fastboot flash boot boot.img
_____
See also :
[GUIDE] How to increase cellular reception strenght in Redmi Note 8 Pro : https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-how-to-increase-cellular-t3987515

Why with TWRP? We can't use MI flash?
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
I am download MI global rom, and want to flash it instead if my EU rom that I have.
I try to unlock bootloader but must wait 52 hours more..
But I wanted to do it with Mi flash tools..can I do that?

Decryption key for mega links?
Decryption key for mega links?

tze_vitamin said:
Why with TWRP? We can't use MI flash?
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
I am download MI global rom, and want to flash it instead if my EU rom that I have.
I try to unlock bootloader but must wait 52 hours more..
But I wanted to do it with Mi flash tools..can I do that?
Click to expand...
Click to collapse
Yes, I have also done it with Mi flash tools.

polfrank said:
So, I guess we have found a way to install twrp and it persists after flashing.
How about magisk? Does it still lead to bootloop efter following this process with twrp?
And how do we do a system update after at have twrp installed?
Click to expand...
Click to collapse
i was not able to install magisk, tried it several times yesterday.

astrakid said:
i was not able to install magisk, tried it several times yesterday.
Click to expand...
Click to collapse
Ok, thanks for reporting. I guess that Magisk just does not support our phone yet.
I have also tested Magisk v20 and got bootloop.

nakedowl said:
Personal note :
It may be possible to flash that chinese TWRP permanently, by replacing recovery.img in firmware images.
And flash it with MiFLASH.
Click to expand...
Click to collapse
Hey, it isn't working. error:"Flash recovery error"

polfrank said:
Yes, I have also done it with Mi flash tools.
Click to expand...
Click to collapse
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.

enzy29 said:
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.
Click to expand...
Click to collapse
I think that you have to unlock the BL first before you can access fastboot flashing, even with mi flash.l

enzy29 said:
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.
Click to expand...
Click to collapse
polfrank said:
I think that you have to unlock the BL first before you can access fastboot flashing, even with mi flash.l
Click to expand...
Click to collapse
Unlock bootloader before use Mi flash. Trust me. You don't want to resurrect phone via adl mode

polfrank said:
I guess that Magisk just does not support our phone yet.
Click to expand...
Click to collapse
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.

BusnjukAn said:
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.
Click to expand...
Click to collapse
please give links, thanks

BusnjukAn said:
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.
Click to expand...
Click to collapse
how did you install magisk? it is not working for me with original miui global 10.4.2.

astrakid said:
how did you install magisk? it is not working for me with original miui global 10.4.2.
Click to expand...
Click to collapse
The ROM is based on the Chinese beta version 9.10.17 Miui 11 and the Magisk is integrated into the ROM. Just flashed the archive with ROM from TWRP. I do not have a direct link to ROM - I downloaded it from the OTA server. You need to ask on the developers site.

BusnjukAn said:
The ROM is based on the Chinese beta version 9.10.17 Miui 11 and the Magisk is integrated into the ROM. Just flashed the archive with ROM from TWRP. I do not have a direct link to ROM - I downloaded it from the OTA server. You need to ask on the developers site.
Click to expand...
Click to collapse
Which ota server is it? Which developer site?

polfrank said:
Which developer site?
Click to expand...
Click to collapse
https://miuipro.info

BusnjukAn said:
https://miuipro.info
Click to expand...
Click to collapse
There is no links to Redmi Note 8 Pro ROM

https://www.staygyan.in/miui-11-beta-update-9-10-17-for-xiaomi-devices-download-links/

robbie_lpl said:
https://www.staygyan.in/miui-11-beta-update-9-10-17-for-xiaomi-devices-download-links/
Click to expand...
Click to collapse
Is this the one that is pre rooted with magisk?

nakedowl said:
Hello everyone,
I recently decided to have a go with swapping from Chinese ROM to Global ROM.
________________________________________
Prequisites :
FASTBOOT + RECOVERY+BOOT : https://mega.nz/#!kpx2wIbY!sxWOxoRGjXribkqMuNSjJCIk94bhrf4M5MSdWpztspE
MiFLASH for REDMI NOTE 8 PRO : https://mega.nz/#!RpxkzSoK!UunxanbaWOkPVYq_NAJakWbc2D0lDygPuTNCc-OO2Og
LATEST EEA ( GLOBAL ) REDMI NOTE 8 PRO FIRMWARE : https://mega.nz/#!p8RDiCRB!2lSEAbtV364L61ZXd_tfAbs53AlsRjmQWa53JRE9BoU
________________________________________
1. Unlock bootloader.
2. Open the MiFLASH, and connect your phone via USB in Fastboot mode.
3. Your phone should be on the list of connected devices.
4. Click on "Browse" -> "Advenced|" and localize file : flash_all_except_data_storage.bat from downloaded FIRMWARE folder.
5. Click FLASH and wait patiently.
6. Phone will Reboot and wait patiently.
7. DONE
________________________________________
Q&A
Does TWRP from that chinese forum presist after flashing ?
No. Phone will go back to original RECOVERY after 2nd restart.
Does that TWRP is functional with REDMI NOTE 8 PRO ?
Some functions may work, some not.
Installing root with this TWRP will cause bootloop.
When something go wrong....
If you end up with BOOTLOOP, for any reason ( Magisk etc. )
Just flash boot.img from FASTBOOT + RECOVERY+BOOT and bring your phone back to life.
This boot.img was extracted from firmware linked above.
_____
Command : fastboot flash boot boot.img
_____
Personal note :
It may be possible to flash that chinese TWRP permanently, by replacing recovery.img in firmware images.
And flash it with MiFLASH.
Click to expand...
Click to collapse
Does the TWRP and Magisk required to flash the global rom? Or if i flash your files via Mi flash it will flash only Stock Global Rom?

Rooting chinese version with global rom.

Hey there are tons of guides and threads about rooting, installing roms etc. and I really don't want to brick my phone(was close once) so can someone please tell me how to root cn version of this phone with global rom installed? Or at least link me a guide which worked for someone in the same situation as me.

bump

KurogamiZz said:
Hey there are tons of guides and threads about rooting, installing roms etc. and I really don't want to brick my phone(was close once) so can someone please tell me how to root cn version of this phone with global rom installed? Or at least link me a guide which worked for someone in the same situation as me.
Click to expand...
Click to collapse
I am also searching for a solution. My phone was chinese variant and flashed global rom and tried to flash twrp and it didn’t get flashed rather it got a bootloop. I fixed that by unrooting from twrp but now i Don't have any recovery, my system recovery also don’t work now

Greetings
rubel623 said:
I am also searching for a solution. My phone was chinese variant and flashed global rom and tried to flash twrp and it didn’t get flashed rather it got a bootloop. I fixed that by unrooting from twrp but now i Don't have any recovery, my system recovery also don’t work now
Click to expand...
Click to collapse
Dude, flash miui fastboot ROM like this (search on YT):
HOW TO FLASH MIUI via FASTBOOT - REDMI NOTE 8 PRO
tha channel name is Konah the Begonia Guardian
*chose your version like pggcnxm

buddy how do you know that you have Chinese version with global rom.
i have this device but not sure if it is global or not

I'm using cn and moved to global.
Here is what I have done:
- Unlock
- Flash fastboot global rom (Only A9 available)
- Update to latest
- Flash orangefox
- Use TWRP's guide to flash vbmeta to disable and avoid tripping AVB (see TWRP thread)
- Boot to system once
- Reboot to recovery
- ...
- Profit
The trickiest part is when flashing recovery. If you don't enter the recovery after entering "fastboot reboot" command, your recovery would likely be replaced. Hold vol+ when entering command.
Be carefull when updating. If you have not flashed a MIUI full rom on orangefox, you cannot do incremental update, so go with full rom once. Also I have bootloop once, and fortunately escaped. Here is my solution (need someone to test, since this is my daily driver)
- Vanillafy everything (uninstall magisk, restore stock boot.img, restore stock recovery)
- Update
- Customize everything
OR
- After flashing update, dont reboot to system. It will likely to trip AVB. Flash vbmeta once and try to reboot.
If you have tried second update method and succeeded, please do tell.
Hope this help.
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
x2138 said:
buddy how do you know that you have Chinese version with global rom.
i have this device but not sure if it is global or not
Click to expand...
Click to collapse
From the packaging, if you have a red box, it's chinese. If white, it's global.
From rom version. If it says someting like "QGGMIXM", it's global. If it says "QCGMIXM" or something like that, it's chinese.

KonahZave said:
Dude, flash miui fastboot ROM like this (search on YT):
HOW TO FLASH MIUI via FASTBOOT - REDMI NOTE 8 PRO
tha channel name is Konah the Begonia Guardian
*chose your version like pggcnxm
Click to expand...
Click to collapse
Bro i flashed MIUI via Fastboot

thx for clarification it was in white box with global rom installed. but is it possible that a Chinese device may have shipped with global rom installed by manufacturers.

rubel623 said:
Bro i flashed MIUI via Fastboot
Click to expand...
Click to collapse
I said that for restaure your device, its the only way for recovery it from "like a brick" error.

KonahZave said:
Dude, flash miui fastboot ROM like this (search on YT):
HOW TO FLASH MIUI via FASTBOOT - REDMI NOTE 8 PRO
tha channel name is Konah the Begonia Guardian
*chose your version like pggcnxm
Click to expand...
Click to collapse
hey are you "KONAH THE BEGONIA GUARDIAN?"

usafxai said:
hey are you "KONAH THE BEGONIA GUARDIAN?"
Click to expand...
Click to collapse
yup dude XD

KonahZave said:
yup dude XD
Click to expand...
Click to collapse
NICE
---------- Post added at 01:12 PM ---------- Previous post was at 12:53 PM ----------
KonahZave said:
yup dude XD
Click to expand...
Click to collapse
can you guide on how to install MIUI 12 global on RN8Pro global currently on MIUI 12 China Beta ROM
I'm not enrolled as Beta tester (i know the warning issued by Xiaomi)
tried directly installing via TWRP over MIUI 12 China
but after finished install, the internal memory got all erased and replaced with weird names of folders and wouldn't boot to the system, kept rebooting to TWRP
reinstalled MIUI 12 China beta via TWRP

usafxai said:
NICE
---------- Post added at 01:12 PM ---------- Previous post was at 12:53 PM ----------
can you guide on how to install MIUI 12 global on RN8Pro global currently on MIUI 12 China Beta ROM
I'm not enrolled as Beta tester (i know the warning issued by Xiaomi)
tried directly installing via TWRP over MIUI 12 China
but after finished install, the internal memory got all erased and replaced with weird names of folders and wouldn't boot to the system, kept rebooting to TWRP
reinstalled MIUI 12 China beta via TWRP
Click to expand...
Click to collapse
pretty simple bro, just return to miui 11 first because I fear you can brick, after that, just flash any twrp for a10 or a9 (depending of your android version) then wipe dalvik, cache, data.
**miui is problematic flashing in different versions, in my video I recommended donwgrade first

KurogamiZz said:
Hey there are tons of guides and threads about rooting, installing roms etc. and I really don't want to brick my phone(was close once) so can someone please tell me how to root cn version of this phone with global rom installed? Or at least link me a guide which worked for someone in the same situation as me.
Click to expand...
Click to collapse
I have the same situation.
Mine was worst. I didn't know my phone was chinese with global rom, 'cause the chinese sold me 'global version', and sent it in white box, but it's the chinese version with global rom.
Well, I tried following a few tutorials, but all after fastboot twrp, close AVB, install ROOT and reboot, started bootlooping and I had to flash global rom again with mi flash. Can't get root access / magisk.
Did you solve that? Please, guide us.

kekesed97 said:
I'm using cn and moved to global.
Here is what I have done:
- Unlock
- Flash fastboot global rom (Only A9 available)
- Update to latest
- Flash orangefox
- Use TWRP's guide to flash vbmeta to disable and avoid tripping AVB (see TWRP thread)
- Boot to system once
- Reboot to recovery
- ...
- Profit
The trickiest part is when flashing recovery. If you don't enter the recovery after entering "fastboot reboot" command, your recovery would likely be replaced. Hold vol+ when entering command.
Be carefull when updating. If you have not flashed a MIUI full rom on orangefox, you cannot do incremental update, so go with full rom once. Also I have bootloop once, and fortunately escaped. Here is my solution (need someone to test, since this is my daily driver)
- Vanillafy everything (uninstall magisk, restore stock boot.img, restore stock recovery)
- Update
- Customize everything
OR
- After flashing update, dont reboot to system. It will likely to trip AVB. Flash vbmeta once and try to reboot.
If you have tried second update method and succeeded, please do tell.
Hope this help.
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
From the packaging, if you have a red box, it's chinese. If white, it's global.
From rom version. If it says someting like "QGGMIXM", it's global. If it says "QCGMIXM" or something like that, it's chinese.
Click to expand...
Click to collapse
If I'm on Global ROM on CN(red box) version phone and decide not to install root or custom recovery and keep everything vanilla with unlocked bootloader, can I do incremental updates?

UsuallyIncorRekt said:
If I'm on Global ROM on CN(red box) version phone and decide not to install root or custom recovery and keep everything vanilla with unlocked bootloader, can I do incremental updates?
Click to expand...
Click to collapse
Yes, OTA works pretty well

UsuallyIncorRekt said:
If I'm on Global ROM on CN(red box) version phone and decide not to install root or custom recovery and keep everything vanilla with unlocked bootloader, can I do incremental updates?
Click to expand...
Click to collapse
You can, working flawlessly. But once go global, never lock your bootloader.

You can use below TWRP Thanks LR Team. (I tired Miui 12 with CH Device)
install TWRP in fastboot
Reboot TWRP after Advanced >File Manager > delete "system_root/system/recovery_fromboot.p"
Again Advanced > install root
Finish.
https://mega.nz/file/7E5QhS6Y#hzCpPWwxO4104R0oJRTv0L1_-lNb5D1pgYp9h4oJfVM
if bootloop restart TWRP>Advanced>Remove AVB 2.0
Advanced >File Manager > delete "system_root/system/recovery_fromboot.p"
Again "Advanced > install root"

can not pass saftynet ctsprofile

Question [solved] xioami mi 11 lite 5g ne (lisa) boots to fastboot only after flashing firmware

hello guys i just recently unlocked my bootloader for xiaomi mi 11 lite 5g ne
so the firmware was on miui 12.5.11.0 and i wanted to go back to 12.5.8 and i tried flashing it with xiaomitool v2. it failed and could not flash super
now I am stuck on fastboot, cannot boot anywhere except fastboot. how to fix this???? do I have to wait for miui 12.5.11 fastboot rom???? how long will this take for fastboot rom???
edit: when i do a fastboot getvar anti the result is 1

Linux üzerinde mi flash veya .sh dosyası ile kurabilirsiniz.

by_BenjamiN said:
You can install it with mi flash or .sh file on Linux.
Click to expand...
Click to collapse
i just flash the MIUI 12.5.8 ROM even though it was orignally MIUI 12.5.11?????
i will try on linux because miflash can never detect my phone for some reason. only xiaomitoolv2 can detect

After you become root on linux, you can install it with the command ./flash_all.sh

langamer101 said:
hello guys i just recently unlocked my bootloader for xiaomi mi 11 lite 5g ne
so the firmware was on miui 12.5.11.0 and i wanted to go back to 12.5.8 and i tried flashing it with xiaomitool v2. it failed and could not flash super
now I am stuck on fastboot, cannot boot anywhere except fastboot. how to fix this???? do I have to wait for miui 12.5.11 fastboot rom???? how long will this take for fastboot rom???
edit: when i do a fastboot getvar anti the result is 1
Click to expand...
Click to collapse
steveroysston​
Download & Install MIUI ROM for Xiaomi 11 Lite 5G NE - FlashXiaomi
Download & Install MIUI ROM for Xiaomi 11 Lite 5G NE that will help to upgrade or downgrade your Xiaomi smartphone for free
flashxiaomi.com

by_BenjamiN said:
After you become root on linux, you can install it with the command ./flash_all.
Click to expand...
Click to collapse
tried on windows the .bat but always error
so tried on linux with sh script and 10 minutes later it is working. thank you very much bro!!!! you life saver!!!

Your welcomm bro

langamer101 said:
tried on windows the .bat but always error
so tried on linux with sh script and 10 minutes later it is working. thank you very much bro!!!! you life saver!!!
Click to expand...
Click to collapse
im curious to know if you did that from the live cd of the distro you picked or if you installed linux

Not a live cd. Fully installed on the drive. Had to dual boot.
Just try different versions of the rom but same region where you bought

langamer101 said:
Not a live cd. Fully installed on the drive. Had to dual boot.
Just try different versions of the rom but same region where you bought
Click to expand...
Click to collapse
thanks a lot for the info

help me i am having the same issue !!! i tried to every img recovery file from platform tools but it only goes to fastboot mode . help ASAP , thank you

Suvadeepnag said:
help me i am having the same issue !!! i tried to every img recovery file from platform tools but it only goes to fastboot mode . help ASAP , thank you
Click to expand...
Click to collapse
xiaomi.eu fastboot rom.
OrangeFox Recovery unofficial
fastboot boot recoveryfilenamehere
flash recovery in recovery
flash what you want

abcxdaabc said:
xiaomi.eu fastboot rom.
OrangeFox Recovery unofficial
fastboot boot recoveryfilenamehere
flash recovery in recovery
flash what you want
Click to expand...
Click to collapse
Thanks..i did install fastboot rom then dod the same way but i sodeloaded pixel os and it starts in first chance..but awoken os was not booting or I don't know it wasn't flashing !! And i have another question is Android 13 firmware is same for every rom ?

Question Installing Xiaomi.eu from crDroid

I'm currently on crDroid 8.7 and i'm thinking of trying Xiaomi.eu to see if the battery life is any better. I dont want to make a mistake flashing the ROM and so I just want to check the procedure before I do.
Am I correct in thinking that when on A12 Xiaomi.eu can only be installed via Fastboot and must not be installed via TWRP?
These are the instructions on the Xiaomi.eu website;
Xiaomi devices on Android 12 via Fastboot only:
- Download our ROM zip file
- Unpack downloaded zip file in the PC using WinRAR
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system:
--- For Windows OS - windows_fastboot_update_rom.bat
Click to expand...
Click to collapse

You don't need WinRAR. It's just a ZIP-file and Windows supports that.
Don't do "Update ROM", you're switching ROMs. crDroid and Xiaomi.eu are quite different from each other.
You might get away with "Update ROM" when switching from one AOSP ROM to another very similar, and not having to erase Userdata, but I don't recommend it. Flashing ROMs in itself is very dangerous, better not play with fire. Especially in this case, I'm certain you otherwise do a Hardbrick.
So use Clean Flash. Also make sure your PC and the USB-connection are reliable, in that they wouldn't randomly disconnect. What I do before a Flash, is copy big video-recordings to see if the USB-connection is stable enough.
I solely say this because my AMD-based PC is plaqued with USB-issues (which are widespread amongst AMD motherboards) and it caused Hardbricks for me in the past.
But you should first flash the Stock ROM, then clean flash Xiaomi.eu. You can get it on the official MIUI site or xiaomifirmwareupdater.com

cyanGalaxy said:
But you should first flash the Stock ROM, then clean flash Xiaomi.eu. You can get it on the official MIUI site or xiaomifirmwareupdater.com
Click to expand...
Click to collapse
Thanks for the info. Can the stock ROM be flashed from SKKK TWRP?

Goooober said:
Thanks for the info. Can the stock ROM be flashed from SKKK TWRP?
Click to expand...
Click to collapse
Yes, that too! Personally I've never used this route. In the past I've always used Fastboot Mode and PC.
But using TWRP seems straightforward, so you could give it a try!
With TWRP:
With PC:

Format data and flash Xiaomi.eu via TWRP. Firmware will be installed so you don't need to do that. That's it.

theoneofgod said:
Format data and flash Xiaomi.eu via TWRP. Firmware will be installed so you don't need to do that. That's it.
Click to expand...
Click to collapse
That could be true...

AICP | Android Ice Cold Project
AICP
dwnld.aicp-rom.com

theoneofgod said:
Format data and flash Xiaomi.eu via TWRP. Firmware will be installed so you don't need to do that. That's it.
Click to expand...
Click to collapse
no twrp version available for this device it requires to be done via fastboot.

mortmaru said:
no twrp version available for this device it requires to be done via fastboot.
Click to expand...
Click to collapse
What phone are we talking about?

theoneofgod said:
What phone are we talking about?
Click to expand...
Click to collapse
The phones this section is about the likes of Poco F3.
head over to xiaomi eu site it clearly states fastboot only for stable build

mortmaru said:
The phones this section is about the likes of Poco F3.
head over to xiaomi eu site it clearly states fastboot only for stable build
Click to expand...
Click to collapse
The fastboot version in Xiaomi.eu stable appeared before skkk twrp that supports android 12 encryption and there is still no stable version update that will appear as a recovery package. If you want to flash Xiaomi.eu on Poco F3 via twrp it is only on Xiaomi.eu weekly beta 22.8.3 for now or wait patiently for the next stable update that you will be able to flash in twrp.

mortmaru said:
The phones this section is about the likes of Poco F3.
head over to xiaomi eu site it clearly states fastboot only for stable build
Click to expand...
Click to collapse
I installed via skkk, worked fine.