Guaranteed update to Oreo for 7X - No TWRP or ADB - Honor 7X Questions & Answers

Hi guys.
I was lost. I did everything to get Oreo. 2 times Honor Support Ticket. Firmware Finder. DNS, Proxy. HuiSuit.
Download FW on SD cadr dload..
Due to the block of Huawei for the servers also Firmware Finder will not work.
Nothing works.
I was still on the way to give up. But then. Magically i found a solution and i think this works for everyone!
First steps:
- Huawei Backup - Save all to SD card if possible
- Save you Images e.g.
- Do connect to a "clean" Internet connection. (No comapany network or Port forwarding, DNS e.g.)
So. The magic: START HERE
- go to System Update - klick App Info
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Click Force Stop
- Click the 3 buttons and click uninstall updates (Now the app will be set to factory)
- Open Firmware Finder
- Check for your Firmware (depends on your country)
- Click on Check Firmware Access (Only if you get a proper answer take this FW if the IMEI is OK and valid)
- Click on download FW and wait for it!
NOTE: During this download a popup appears on my phone (System update will be updated):
If so: Before you do activate the proxy check the app (system update) again and klick the 3 buttons and hit "uninstall apps".
- If download is finished click on In-App Proxy
- Go to you WLAN and change the proxy manually to "localhost" port "8080"
- If connected go to System Update an hit search button. (On my phone already there was a red text showing update is there)
- Go for check and the FW should appear.
- Now go back to WLAN and disable the proxy!
- Go to Sytem update and hit download
And there you go. OREO should then be updated and works.
After installation go to Google Play store, update the System Update and do a search again.
There will be found 3 Updates to newest security patche.
HAVE FUN and Thank God i found a solution.!! :good::good::good::good:
Fast manual for the PRO´S
- System Update - STOP - Disable Updates
- Go for the right FW on FW Finder
- Go for updates. (Check again the system update if there was no update done automatically)
- Set proxy - go to search FW - If it is there go back to wlan an disable proxy
- download the FW and install

GalaxyKnight said:
Hi guys.
I was lost. I did everything to get Oreo. 2 times Honor Support Ticket. Firmware Finder. DNS, Proxy. HuiSuit.
Download FW on SD cadr dload..
Due to the block of Huawei for the servers also Firmware Finder will not work.
Nothing works.
I was still on the way to give up. But then. Magically i found a solution and i think this works for everyone!
First steps:
- Huawei Backup - Save all to SD card if possible
- Save you Images e.g.
- Do connect to a "clean" Internet connection. (No comapany network or Port forwarding, DNS e.g.)
So. The magic: START HERE
- go to System Update - klick App Info
- Click Force Stop
- Click the 3 buttons and click uninstall updates (Now the app will be set to factory)
- Open Firmware Finder
- Check for your Firmware (depends on your country)
- Click on Check Firmware Access (Only if you get a proper answer take this FW if the IMEI is OK and valid)
- Click on download FW and wait for it!
NOTE: During this download a popup appears on my phone (System update will be updated):
If so: Before you do activate the proxy check the app (system update) again and klick the 3 buttons and hit "uninstall apps".
- If download is finished click on In-App Proxy
- Go to you WLAN and change the proxy manually to "localhost" port "8080"
- If connected go to System Update an hit search button. (On my phone already there was a red text showing update is there)
- Go for check and the FW should appear.
- Now go back to WLAN and disable the proxy!
- Go to Sytem update and hit download
And there you go. OREO should then be updated and works.
After installation go to Google Play store, update the System Update and do a search again.
There will be found 3 Updates to newest security patche.
HAVE FUN and Thank God i found a solution.!! :good::good::good::good:
Fast manual for the PRO´S
- System Update - STOP - Disable Updates
- Go for the right FW on FW Finder
- Go for updates. (Check again the system update if there was no update done automatically)
- Set proxy - go to search FW - If it is there go back to wlan an disable proxy
- download the FW and install
Click to expand...
Click to collapse
So,which version do you get to the end...? 8.0.0.333 ?

Yes. 8.0.0.333 (C432)

GalaxyKnight said:
Yes. 8.0.0.333 (C432)
Click to expand...
Click to collapse
I see an improved charging speed from 3h to 2h on 8.0.0.333

GlaxyKnight
Thank you
An update I've been looking for in a long time

So should I take any specific version, or just take the latest valid version that's compatible for me? (in my case that's 337 as 338 returns a not compatible in FWF)

死-shi said:
So should I take any specific version, or just take the latest valid version that's compatible for me? (in my case that's 337 as 338 returns a not compatible in FWF)
Click to expand...
Click to collapse
Take the newest one. And check always for compatibility. If it is approved in FW updater than take it and go on with this tutorial...

it worked
thank you my good man

Related

[MIUI-INDIA] [4.4.4 ]XoloQ1000/CM OmegaHD 2/EXPLAY HD QUAD/TECNO F7

Wining ROM In MIUI ROM PORTING CONTEST​
ChangeLog
MIUI VERSION 4.4.4
Full MIUI Stock
Full New Optimized
13 MP Camera Patched
Improve perfomance
Xperia Keyboard Added
Init.D Support & Tweaks
Zipalign
Kernal Tweaks
CPU TweaKs
Net Speed Tweaks
System tweaks
Build.Prop Tweaks
New Ram Managements
Battry Tweaks
New Deep Sleep Data Method (Improves Battry and Reduce Ram Usage)
Display Sharpness tweaks
Improve Sounds and Audio Quality
Fixed all Bugs
No delay in making calls
Dalvik VM tweaks
Rooted with Permission manager
Gapps included
Click to expand...
Click to collapse
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Full Rom Download Link
Full ROM V 4.4.4
CLICK ME
Click to expand...
Click to collapse
Full ROM Flashing Instructions
1. Do factory reset
2. clear dalvik cache
3. clear cache data
4. Format System
5. Flash ROM.zip
6. Reboot
Click to expand...
Click to collapse
Bugs
NONE
U may report if found
Click to expand...
Click to collapse
Kernal: Stock
Version Information:Android 4.2.1
Status: Stable
Current MIUI Version:4.2.28
Last Updated 2014-02-28
Click to expand...
Click to collapse
Xperia Keyboard Fix Patch
http://d-h.st/dHD
Javajohn said:
New version Updated
Click to expand...
Click to collapse
Can we have only the update instead of whole rom??
Nice rom john with out any lag
Keep this thread alive...
Cheers
Sent from my Q1000 using XDA Premium 4 mobile app
Gr8 Rom...with some bugs
Great Work John......Fantastic ROM, but found few bugs -
i. FM Radio Crashes each time I start it.
ii. GPS doesnt work (cannot lock on to location).
iii. Only Chinese Cities in Weather.
Excluding that, the ROM is a AWESOME!!
Cheerio...
-AdilDSW
adildsw said:
Great Work John......Fantastic ROM, but found few bugs -
i. FM Radio Crashes each time I start it.
ii. GPS doesnt work (cannot lock on to location).
iii. Only Chinese Cities in Weather.
Excluding that, the ROM is a AWESOME!!
Cheerio...
-AdilDSW
Click to expand...
Click to collapse
ok will check in upcoming version
New version 3.10.11 updated
link in first post
change log
[System]
Optimization - When the system clock is set to 12-hour display, clock will display “12 AM” instead of “0 AM” (10-09)
Fix - When Menu is open and user rotates screen, menu stops responding (10-10)
[Messaging]
Fix - When system language is set to English, Messaging app quits when sending timed messages (10-11)
[Phone]
Optimization - Edits have been made to how Do not disturb handles repeated calls from the same number (10-09)
[Gallery]
New - Fixed some images that were not displaying correctly in album view (10-08)
New - Support for renaming cloud albums (10-08)
New - Optimized GIF decoding process and fixed some format problems that GIF images to have choppy playback (10-08)
Fix - Screen shakes or flashes when displaying images (10-08)
Fix - App would force quit when user touched the cloud album widget (10-08)
Fix - After the app's cache is cleared, album thumbnails would not be downloaded promptly (10-08)
[Music]
Optimization - User is notified when he or she can’t view now playing interface (10-09)
Optimization - When a song is set as the ringer, editor opens automatically (10-09)
Fix - When the system is to English, the titles around the song info boxes are still in Chinese (10-09)
[Compass]
Optimization - Improved compass app’s calibration (10-09)
[Browser]
New - Long press or swipe upwards on the box in the lower tool bar to close the current tab (10-09)
New - Long press “New” button on the lower tool bar to enter an address (10-09)
Fix - When Emoji (emoticons) were entered into a text box, app would quit unexpectedly (10-10)
[FM Radio]
Fix - Now supports FM87.4
Fix - Sometimes the radio would not start (10-09)
[Recorder]
New - Use your device‘s receiver for playback (10-09)
[Video]
New - When viewing episodes in full screen mode, the next episode begins automatically (10-09)
[Other]
Fix - When earbud are disconnected while listening to radio, volume drops to “0” (10-09)
mistak double
Cherry Mobile Omega HD 2.0
There are two build versions of Cherry Mobile Omega HD 2.0.,.first is build 49 and the latest is build 7.,.both can have this ROM or only the first build?..
hahaha, kaw na knyjay
New version 3.10.19 custom edition
added link to first post
all bugs fixed
delete
Wsm tool stop working sir >,<
is there any way to fix it sir?
i just uninstall WSM tool and install WSM TOOL again but i cant reboot it from WSM tool reboot it hang there and if i reboot from pressing power button after reboot nothing happen >,<
help us sir. thanks
suzhipack said:
Wsm tool stop working sir >,<
is there any way to fix it sir?
i just uninstall WSM tool and install WSM TOOL again but i cant reboot it from WSM tool reboot it hang there and if i reboot from pressing power button after reboot nothing happen >,<
help us sir. thanks
Click to expand...
Click to collapse
its working fine for me check this step by step
Installation:
Run WSM tools
Go to Settings - Control WSM (3 Screen)
Press the Install / Update (4 screen)
After installation, reboot
It is important to:
After updating the firmware you will need to go to Settings - Control WSM and press Install / Update
After installation, reboot.
Javajohn said:
its working fine for me check this step by step
Installation:
Run WSM tools
Go to Settings - Control WSM (3 Screen)
Press the Install / Update (4 screen)
After installation, reboot
It is important to:
After updating the firmware you will need to go to Settings - Control WSM and press Install / Update
After installation, reboot.
Click to expand...
Click to collapse
yes sir. i just downloaded http://forum.xda-developers.com/showthread.php?t=2481178 ( WSM Manager 2.0.3.apk )
but after i reboot "NO WSM MODULES WERE FOUND"
do u have a copy of your WSM sir? with modules?
suzhipack said:
yes sir. i just downloaded http://forum.xda-developers.com/showthread.php?t=2481178 ( WSM Manager 2.0.3.apk )
but after i reboot "NO WSM MODULES WERE FOUND"
do u have a copy of your WSM sir? with modules?
Click to expand...
Click to collapse
modules u have to download
just open wsm and go to online tab . there u will find all module
mew version 3.10.26 Updated VIA OTA
LINK OF OTA ADDED IN FIRST POST
Cannot download files larger than 20mb through mobile data.....always asking for WiFi.....AnyCure???
You will have to manually force any downloads (from browser or Google Play etc) that are over the file limit in the Downloads app.
Set limit to 20MB
Download file >20MB from wherever
Open Downloads app
File will appear saying 'waiting for wifi connection'
Press 'Resume' button
adildsw said:
Cannot download files larger than 20mb through mobile data.....always asking for WiFi.....AnyCure???
Click to expand...
Click to collapse
adildsw said:
Cannot download files larger than 20mb through mobile data.....always asking for WiFi.....AnyCure???
Click to expand...
Click to collapse
download limit is extented to 1g .
just download patch from first post and flash it from recovery and set it to 1gb

[ROM][KERNEL][TWEAK]JellyPro for Galaxy Y Pro (GT-B5510)[2.3.6]

JellyPro1.3 for Galaxy Y Pro B5510​
FEATURES :
Based on :
ROM stock Samsung XXLH3 (CSC OXALH4, Modem XXLH2) (Gingerbread)
ASAsoft kernel (https://github.com/asasoft/Kernel-B5510)
Functionality :
Init.d support
Support azerty or qwerty keyboard
Dark Jelly Bean themed (only phone.apk is not fully themedl)
New "recent app" shortcut
SMS stock apk replaced by Cyanomodgen's
Included : GO SMS PRO, Emoji plugin & Iphone theme, and ES file explorer
Rooted
CPU spy & No-frill CPU control integrated in setting apk
Extend battery life
Extended Power menu
New boot animation & deleted shutdown one
Sony xloud™
Status bar improved, slide to get away (available since the OTA 1.3)
RFS filesystem (samsung default)
Core tweaks :
Bacem_tweak : undervolt your battery up to 20 mV (you can change this in init.d/01bacem_tweak)
droidwall_modules
darky_zipalign : zipalign at every boot
KURO 1 and KURO 2 tweaks : many useful tweaks
Adrenaline engine : other optimizations
DOWNLOADS :
ROM stock (unzip) : http://www.mediafire.com/?lrqtxhk4bl9ytyn
Utilities (unzip) : http://www.mediafire.com/?51061xjq21c71xk
ROM JellyPro (do NOT unzip) : http://www.mediafire.com/?9rb34a481eg9gbq
ASASoft kernel : https://github.com/asasoft/Kernel-B5510
/!\ Please do not mirror and PM me before publishing on an other thread or forum /!\
After downloading and unzipping, you should have seven files :
Stock ROM :
Modem.tar
PDA.tar
CSC.tar
Cutom kernel :
Samsung-B5510-Kernel.tar
Utilities :
unlock.zip to unlock your phone if you want
CWM.zip to flash the ROM
And the custom ROM :
JellyProV1.3.zip
SETUP :
Preliminary : have ODIN (last version recommended), put unlock.zip , CWM.zip and JellyProV1.3.zip on your memory card, not in any folder
Step 1 : Connect your phone in download mode (power + home + vol down) and flash stock ROM with odin.
Get back another time to download mode, and flash the custom kernel.
Step 2 : Reboot your phone recovery mode (power + home + vol up) and select "wipe data (factory reset)", and confirm
Warning : this wil ERASE ALL your data
(you can just make a "wipe cache", but I don't advise that)
Then select "Apply update from sdcard", and select CWM.zip
You enter in the ClockWorkRecoveryMod
Select => "mount and storage", => "format /system", confirm
IMPORTANT : do NOT forget, then, to select "mount /system" and "mount /data", unless ROM won't install correctly (after that, they both say "unmount/system" and "unmount/data")
The hit return button and chose in the menu : "install zip from sdcard", then "choose zip from sdcard". Select JellyProV1.3.zip.
Be patient...
Reboot.
Recommendations :
Don't try to update, it's useless because the apk has been removed
Credits :
ImbaWind for adrenaline script
agmtpd for the task switcher
lokeshsaini94 for various mods
lidroid for the statut bar
And you, tester, to give me ideas and reports
If a moderator could move this thread, I'll be thankful... I cannot post in dev cause I'm still a n00b on this forum... and sorry if my english isn't very well, cause I'm french
TIP :
If your sim card doesn't work (and if you want to set your keyboard as qwerty and not azerty), try changing the CSC : type *#06# to get your IMEI number, and then type *#272*<your IMEI># ; select your own CSC code (for me XEF for example) but this will ERASE ALL YOUR DATA !!!
Observation :
This ROM is very close to the JellyBlast one I made a few month ago. That's intentional : I re-coded myself all the functionalities I wanted from the stock ROM. There is no code from creed anymore (you can check ), only mine and these from the credits.
If you spot a bug, or/and you know hows to solve it (especially theming ones), PM me
UPDATES :​
All Over The Air (OTA) updates must be flashed in CWM, after doing a "clean cache" (if not, a bootloop can occur) ; obviously, do not format /system... All previous updates must be flashed before applying the latest update (for example, you have to be in OTA1.3 in order to flash 2.1).
OTA 1.3 :
Excuse me for the names, but the OTA 1.3 is not included in JellyPro1.3. It only means I made 3 major changes in the original ROM, and 3 major changes in the first OTA.
Changelog :
Swipe to get away notification added
Buggy beats equalizer deleted
Superuser shortcut added in settings
Luminosity slider added in statut bar
Solved which made crash the statut bar in the setting app
Wake up on optical pad press
Emotes added
Download : https://www.mediafire.com/?8csndwxcga1n9yf
OTA 2.1 :
Changelog (sorry, not too much I'm afraid) :
Bug solved on SMS stock app
Bug solved on statut bar
ES File explorer updated
Only a few graphic issues solved
Loading annimation changed
Wake up on optical press debug for those who don't use french language
Download : http://www.mediafire.com/?i9mjmhmcvpvsuv7
OTA 3.1 :
Changelog :
ES File Explorer Updated
Go SMS Pro deleted, available in an app pack
Download : http://www.mediafire.com/?7a500yzaveao0g3
Themes, Add-Ons & Apps :
All those zips must be flashed in CWM after a wipe of the cache and a davlik-cache. Moreover, theses themes are only for the latest version of JellyPro : 3.1 (even if the name ends by 2.1, it only show the minimal update you have to get before flashing the theme).
Themes :
Center clock : http://www.mediafire.com/?xjddf11tbqs31f2
Clock back to right : http://www.mediafire.com/?3910lc09h98hook
Other battery icon with percentage : http://www.mediafire.com/?4vhkrbhagvu166m
Back to the original battery icon : http://www.mediafire.com/?6isqoq62ft2889d
Add-Ons :
App Pack : http://www.mediafire.com/?shbokqps98lb847
Install Pdroid, android assistant, cleaner master et LBE security (V5, the latest compatible with B5510) in system/app.
Uninstall : http://www.mediafire.com/?gzizhmeocrdxd7d
GO SMS Pack : http://www.mediafire.com/?zf591vur843f5hl
Install Go SMS Pro, emoji plugin, french language pack and iphone theme in a old version compatible with JellyPro.
Uninstall : http://www.mediafire.com/?ugeoiiztz7ok43r
Apps :
Here you can find old/moded app for the Galaxy Y Pro. If you've got one not listed, feel free to tell me !
Skype : https://app.box.com/s/bzuhyrzj3txb2aqyoo0g
Rescan media root : https://play.google.com/store/apps/...diascannerroot&rdid=com.addz.mediascannerroot
Deactivate the scan of media file on startup : you can win up to 30 seconds in boot.
/!\ Must be reactivate when updating !!!
AnTuTu Benchmark : http://www.mediafire.com/?l5rm8c55ubzhy3n
Screenshots :
Bootanimation & PIN lock sceen :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Launcher & Icons :
Music & Contacts :
Setting app :
Calls :
Extended Power Menu :
Easter egg :
NycoFR said:
reserved for screenshots
Click to expand...
Click to collapse
Could you post some pictures?
Yes I'm working on it
NycoFR said:
Functionality :
Support azerty or qwerty keyboard
Click to expand...
Click to collapse
Any idea how to change from azerty to qwerty? I changed the language to italian or english but that doesnt change the hardware keyboard layout
You have to select the CSC which goes with your country, defaul is XEF (fr, azerty keyboard), and you have to change it to those for your country with qwerty keyboard (look at the bottom of the first post, in TIPS )
latest google apps?
your rom works perfectly except the fact that I cannot use/update to the lastest google apps... any tip?
What do you mean by "Google apps" ? Have you got any error message ? I can use gmail, calendar, maps, etc without issues on mine. Have. You installed all the updates (1.3 and 2.1) ? But if you're talking about YouTube, I blocked the updates (by signing the app differently) because the latest update is veeerrrryyyyy slow, and the background player (small icon of the video) is pretty ridiculous on this small screen^^
Dialer Theming
@NycoFR Please change the Blue circle to full Green Circle!
Updated YouTube App for JellyPro
Latest Updated YouTube App for JellyPro
Pie Controls for JellyPro!
Pie Controls for GT-B5510
Orignal Thread:http://forum.xda-developers.com/showthread.php?t=1330150
Credits:noname81
What the heck are you doing ? I've already included some boost tweak, and I tried adrenaline which cause some battery leaks, the latest YouTube is just awful for a small screen, and I don't want to overload my rom with so much apps ! But thanks for th masterkey app, I was looking for it, I'll include it in my next OTA. For the circle, I'm trying but I'm out of time, sorry, I will be more available next year
Thread cleaned of off topic material.
Thanks a lot ! And I don't think that pie control is compatible with a landscape screen^^
NycoFR said:
What do you mean by "Google apps" ? Have you got any error message ? I can use gmail, calendar, maps, etc without issues on mine. Have. You installed all the updates (1.3 and 2.1) ? But if you're talking about YouTube, I blocked the updates (by signing the app differently) because the latest update is veeerrrryyyyy slow, and the background player (small icon of the video) is pretty ridiculous on this small screen^^
Click to expand...
Click to collapse
Well I am talking about Google Play Services. I don't seem to be able to install it (it either says it's incompatible or the it complains about the signature). hence I can't use google+ or hangouts.. any idea how to fix it?
zekusso said:
Well I am talking about Google Play Services. I don't seem to be able to install it (it either says it's incompatible or the it complains about the signature). hence I can't use google+ or hangouts.. any idea how to fix it?
Click to expand...
Click to collapse
Hello, I'm too looking on a howto install Play Services. My wife use it on stock rom with no problems specifically to use the Google+ Photos autoupload feature for photo backups.
With this rom it can't be installed and Google Photos does not work.
Everything else works like wonders
Launch es file explorer in root mode and delete /system/app/GoogleServiceFramework.apk (make a backup first !), then delete /data/dalvik-cache folder, and reboot (it will take a few minute to initialise all), or try replacing the play store apk...
Can you upload a version without all the signed apks?? Thanks

Iwown I5 Plus, upgrade, downgrade, Zeroner software MOD, Firmware, DFU...

Iwown I5 Plus Smart Bracelet.
Manufacturer: http://iwown.com/en/Bracelet/2015/0203/32.html
E-mail: [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recommended: Annotate Initial firmware version 1.1.0.x or 1.0.0.x
Warning:
There are two versions.
Initial Version 1.0.0.x no compatible whit 1.1.0.x and viceversa.
If you charge incorrect firmware and try update to version 2.0.0.x zeroner download a incorrect version.
Firmware version 2.0.0.x for initial vesion 1.0.0x is diferent that 2.0.0.x for 1.1.0.x
if you have made an update official from zeroner App, into zeroner folder will be a . hex file, check file size, According to the table below.
If don´t exist .hex file, try to update from Zeroner, but no push Update, so check file .hex donwloading into Zeroner folder.
Trick to know the version of a downloaded firmware.
Firmware 1.0.0x file size . hex ~137 - 138 KB. -----> Firmware 2.0.0.x ~ 180 KB.
Firmware 1.1.0x file size .hex ~ 142 -143 KB. -----> Firmware 2.0.0.x ~ 184 - 186 KB
Remember choice correct firmware.
There are two possible combinations of software and firmware.
Firmware 1.x.x.x -------Zeroner Version 2.x
Firmware 1.x.x.x only screen Horizontal, camera and find phone funtion, lost Step when power off, notificacions work ok.
Last zeroner v2.2.0: https://play.google.com/store/apps/details?id=com.kunekt.abroad
Mirror: http://uploaded.net/file/i2xfwnnt/Zeroner220.apk
Last firmware: v1.1.08.
http://uploaded.net/file/gjsdgdzt/v1108.hex
http://www.mediafire.com/download/a1rd7yodaq6eiu2/v1108.hex
Last firmware 1.0.0.24:
http://uploaded.net/file/2ttsekg2/v10024.hex
http://www.mediafire.com/download/hb22xq5ow78f9kc/v10024.hex
Firmware 2.x.x.x ----- Zeroner Version 3.x
Firmware Version 2.x.x.x: screen horizontal and vertical, 23 new sports to choice, notifications Ok, no camera and find phone function, don´t lost step when power down, many more battery life. New: Find phone work whit version 2.0.1.0
Update. Zeroner 3.1 Play store, camera function work, find phone don´t work.
Last Firmware v2.0.1.8:
v2.0.1.8 from 1.1.x.x:
http://uploaded.net/file/s3iw0wzf/2018-11xx.hex
http://www.mediafire.com/download/yg2bpmd7m0mcv8h/2018-11xx.hex
v2.0.1.8 from 1.0.x.x:
http://uploaded.net/file/3bhblvsp/2018-10xx.hex
http://www.mediafire.com/download/rksli93db9b72lx/2018-10xx.hex
Unfortunately, Zeroner version 3.x.x full, only official in chinese language or a lite version in Play Store.
Zeroner V.3.2.1 Play Store: https://play.google.com/store/apps/details?id=com.healthy.abroad
Zeroner V.3.6.6.7 chinese official: http://android.myapp.com/myapp/detail.htm?apkName=com.kunekt.healthy
I have made some changes in Chinese applications to work in another language.
Zeroner 3.3.4 English & Spanish, It works with the phone in any language.
http://uploaded.net/file/1y5dl5ui/Zeroner3_3_4_en_es_v2.apk
https://userscloud.com/7zeqecc0w9z4/Zeroner3_3_4_en_es_v2.apk
http://www.mediafire.com/download/4v2v92835i0avf3/Zeroner3_3_4_en_es_v2.apk
MOD:
-Add English and spanish laguages
-Add missing strings and traslate chinese strings in xml files.
-Changed chinese to english in notification bar.
-Chinese characters changed when an SMS or call is received.
-Changed many chinese messages to english. Include Low Battery.
-Changed chinese in date/time.
-Implemented in the code the solution provided by Vardas to resolved loalization problem.
Thanks to User Vardas from 4pda.ru.
Any Chinese message showing by unmodified app code.
I used google translator.
Iwown say: not recommended use RedMi、Meizu 、ZTE、Sony、Lenovo to upgrade firmware
When update/downgrade keep phone screen on, don´t allow the phone to sleep, do not move the bracelet during the process, better leave i5 Plus on a table.
Know problems with DFU settings App nRF Master Control Panel:
- Setting Package Receipt Notification to OFF or less than ~400 will not work on some phones, f.e. Nexus 4, Nexus 7. On Nexus 5 it increases upload speed to 4.3 sec/18kb.
If your phone only recognizes the bracelet as i5+-DFU3 after a failure update,read the second post and perform from step 11.
If your bracelet no power on, vibre and blind light, you can try:
http://forum.xda-developers.com/showpost.php?p=63870796&postcount=434
thanks: @oldslowdiver
You can read http://forum.xda-developers.com/general/accessories/i5-plus-smart-watch-wristband-unboxing-t3137338 for more information.
Or in Spanish: http://www.htcmania.com/showthread.php?t=1085110
Links:
Zeroner MOD:
Zeroner v3.2.8:
http://uploaded.net/file/kqkvvqf4/zeroner3.2.8translate.apk
https://userscloud.com/sr7ul9nay326/zeroner3.2.8translate.apk
http://www.mediafire.com/download/9o12lxmpswz4s8q/zeroner331_us_es.apk
Zeroner v3.3.1 English:
http://uploaded.net/file/u0ap161q/zeroner3_3_1_us.apk
https://userscloud.com/xafwal7bbglu/zeroner3_3_1_us.apk
http://www.mediafire.com/download/d1nzycszmx2p8rh/zeroner3_3_1_us.apk
Zeroner v3.3.1 English & Spanish:
http://uploaded.net/file/zwz4oijm/zeroner331_us_es.apk
https://userscloud.com/jx4kpulzrnnb/zeroner331_us_es.apk
http://www.mediafire.com/download/9o12lxmpswz4s8q/zeroner331_us_es.apk
Zeroner v3.3.2 English & Spanish:
http://uploaded.net/file/smmbx8p1/zeroner3.3.2_us_es.apk
https://userscloud.com/ag4m3i79e1yl/zeroner3.3.2_us_es.apk
http://www.mediafire.com/download/zfmw185ocilz4ma/zeroner3.3.2_us_es.apk
Zeroner v3.3.3 English & Spanish (Notification Bar English):
http://uploaded.net/file/r54a1czy/zeroner3_3_3_us_es.apk
https://userscloud.com/bglpmotlfl03/zeroner3_3_3_us_es.apk
http://www.mediafire.com/download/4747al20v04e4v0/zeroner3_3_3_us_es.apk
Zeroner 3.3.4 English & Spanish Only US location:
http://uploaded.net/file/crmbsc26/zeroner3_3_4_us_es.apk
https://userscloud.com/6ndp3tbpgdaj/zeroner3_3_4_us_es.apk
http://www.mediafire.com/download/tuuh99ung9nw1ri/zeroner3_3_4_us_es.apk
Decimal separator problem, only work fine whit phone setting in english (USA and UK) and spanish (USA).
You can launch app in different language whit this Xposed module: App Settings v1.10
http://forum.xda-developers.com/xpos...05-14-t2437377
Update downgrade. See second post.
Zeroner Update MOD DFU Mode:
http://uploaded.net/file/l5qi74uj/DFU Mode I5 Plus.apk
http://www.mediafire.com/download/5hvcfa667obdpx9/DFU_Mode_I5_Plus.apk
nRF Master Control:
https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp
Pack App DFU Mode + all firmware:
http://uploaded.net/file/vsw37343/DFU Mode + all firmware.zip
Firmware:
v2.0.1.8 from 1.1.x.x:
http://uploaded.net/file/s3iw0wzf/2018-11xx.hex
http://www.mediafire.com/download/yg2bpmd7m0mcv8h/2018-11xx.hex
v2.0.1.8 from 1.0.x.x:
http://uploaded.net/file/3bhblvsp/2018-10xx.hex
http://www.mediafire.com/download/rksli93db9b72lx/2018-10xx.hex
v2.0.1.6 from 1.1.x.x:
http://www.mediafire.com/download/423g98gmwvc8ccd/2016-11xx.hex
http://uploaded.net/file/mq1cn5rz/2016-11xx.hex
v2.0.1.6 from 1.0.x.x:
http://www.mediafire.com/download/vbx7uhabc1d4kxx/2016-10xx.hex
http://uploaded.net/file/gka1nz3i/2016-10xx.hex
2.0.1.1 fron 1.1.0.x:
http://www.mediafire.com/download/yu5vi3h98mofxjh/2011-11xx.hex
http://uploaded.net/file/pk9sm1v3/2011-11xx.hex
2.0.1.1 from 1.0.0.x:
http://www.mediafire.com/download/p2erxfmrxb9ioke/2011-10xx.hex
http://uploaded.net/file/ksicbc5e/2011-10xx.hex
v2.0.0.10 from 1.1.x.x :
http://uploaded.net/file/g8k0mp69/2010-11xx.hex
http://www.mediafire.com/download/xd0zy10ut99sk31/2010-11xx.hex
v2.0.0.10 from 1.0.x.x :
http://uploaded.net/file/n1r4gbcz/2010-10xx.hex
http://www.mediafire.com/download/fcspgo3h2xqb723/2010-10xx.hex
v2.0.0.9 from 1.1.x.x :
http://uploaded.net/file/65vdhes7/2009-11xx.hex
http://www.mediafire.com/download/q44tdx1qnfevavb/2009-11xx.hex
v2.0.0.9 from 1.0.x.x :
http://uploaded.net/file/tdpy321a/2009-10xx.hex
http://www.mediafire.com/download/fcspgo3h2xqb723/2010-10xx.hex
v2.0.0.7 from 1.1.x.x :
http://uploaded.net/file/xctq1qux/2007-11xx.hex
http://www.mediafire.com/download/f920edit9a3foaj/2007-11xx.hex
v2.0.0.7 from 1.0.x.x :
http://uploaded.net/file/l9psirbh/2007-10xx.hex
http://www.mediafire.com/download/q58gzac7kflg3g9/2007-10xx.hex
v1.0.0.23:
http://uploaded.net/file/sbtct6xe/v10023.hex
http://www.mediafire.com/download/7moi94293wb5wb1/v10023.hex
v1.0.0.24:
http://uploaded.net/file/2ttsekg2/v10024.hex
http://www.mediafire.com/download/hb22xq5ow78f9kc/v10024.hex
v1.1.0.7:
http://uploaded.net/file/hr4uxvzw/v1107.hex
http://www.mediafire.com/download/47665499syq6olu/v1107.hex
v1.1.08:
http://uploaded.net/file/gjsdgdzt/v1108.hex
http://www.mediafire.com/download/a1rd7yodaq6eiu2/v1108.hex
Zeroner v3 chinese:
http://uploaded.net/file/tgwlp3ju/com.kunekt.healthy_3.3.2_98.apk
http://uploaded.net/file/ce8o5wof/com.kunekt.healthy_3.0_5.apk
http://uploaded.net/file/d54m2eun/com.kunekt.healthy_3.3.1_97.apk
http://uploaded.net/file/s8gkg11k/com.kunekt.healthy_3.3.3_99.apk
http://uploaded.net/file/lknmnqka/com.kunekt.healthy_3.2_80.apk
http://uploaded.net/file/6vqwuxtx/com.kunekt.healthy_3.1_6.apk
P.D: Sorry for my English.
I make a MOD of Zeroner IOS Update for managed DFU mode in I5 Plus any firmware.
You can upgrade/downgrade I5 Plus, choosing the firmware to load.
Recommended read the first post.
Remember: Choose the correct firmware for your model.
Iwown say: not recommended use RedMi、Meizu 、ZTE、Sony、Lenovo to upgrade firmware
When update/downgrade keep pnone screen on, don´t allow the phone to sleep.
Know problems with DFU settings App nRF Master Control Panel:
- Setting Package Receipt Notification to OFF or less than ~400 will not work on some phones, f.e. Nexus 4, Nexus 7. On Nexus 5 it increases upload speed to 4.3 sec/18kb.
Software:
App DFU Mode I5 Plus:
http://uploaded.net/file/l5qi74uj/DFU Mode I5 Plus.apk
http://www.mediafire.com/download/5hvcfa667obdpx9/DFU_Mode_I5_Plus.apk
nRF Master Control:
https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp
Pack App DFU Mode + all firmware:
http://uploaded.net/file/vsw37343/DFU Mode + all firmware.zip
Alone Firmware in first post.
Process
Bluetooth ON.
Open App Dfu Mode I5 Plus.
1- Push SCAN
2- Select Bracelet.
3- Wait.
4- Push "Enter to DFU Process.
5- Minimize app.
6- Warning , sure no .hex file in Zeroner Folder, if exist delete.
7. Maximize app.
8- Push Circle "Push For DFU Mode"
9- Wait.
Bracelet power on light and screen off.
10- Close app.
11- Open app nRF Master Control.
12- Push Connect i5+-DFU3
13- Push DFU
14- Warning Select "Aplicattion"
15- Select .hex file firmware.
16- Push "NO"
Starting uploading firmware.
I5 Plus Restart with new firmware.
Reserved.
Great Work
Thank you so much for the dfu app & the collection of firmawares & special thanks for the translated apps !
trying the downgrade method & i'll brb to report
keep up the good work :good:
Edit: Downgraded to 1.1.08 & upgraded to 2.0.1.0 again through zeroner 3.3.4. Everything went smoothly (the only thing that scared me was the speed of uploading the .hex using nRF Master Control. It was so slow it took 8min)
Hard DFU Mode.
To put the bracelet in DFU mode.
Install nRF Master Control Panel: https://play.google.com/store/apps/...mi.android.mcp&rdid=no.nordicsemi.android.mcp
First.
Usb connect to pc o usb power adapter
Battery positve disconnect. You can use a switch.
Steps:
1. Open nRF Master control Panel, in android phone, push scan.
2. Put point 2 "RED" to battery positive, use point in capacitor, it is easier. Use a wire
3. nRF Mster Control detect dfu device, Hold connection in point 2 "RED".
4. Connect positive battery.
5. you can realase connection in point 2 "RED".
Now I5 plus is DFU mode and you can upload any firmware whit nRF Mater Control Panel.
Hi, is there the possibility of a smart wakeup like the Xiaomi Mi Band?
rizzotti91 said:
Hi, is there the possibility of a smart wakeup like the Xiaomi Mi Band?
Click to expand...
Click to collapse
No.
Thank you for all your work! It is pretty amazing.
The download 3.3.4 gives an error message when I try to install. 'Can not parse'
Perhaps it is faulty?
Hi,
gerry11 said:
Thank you for all your work! It is pretty amazing.
The download 3.3.4 gives an error message when I try to install. 'Can not parse'
Perhaps it is faulty?
Click to expand...
Click to collapse
uploaded.net doesn't work from mobile. You need a PC to download.
very thanks @roninzgz, great job
ftomek said:
Hi,
uploaded.net doesn't work from mobile. You need a PC to download.
Click to expand...
Click to collapse
Downloading was not the problem . When installing the apk it gives an error message on my phone.
I never had this issue before with the translated apk's of roninzgz.
Lovetz said:
No.
Click to expand...
Click to collapse
It's a software missing or a hardware missing?
---------- Post added at 12:18 PM ---------- Previous post was at 12:07 PM ----------
gerry11 said:
Downloading was not the problem . When installing the apk it gives an error message on my phone.
I never had this issue before with the translated apk's of roninzgz.
Click to expand...
Click to collapse
The last apk is perfectly working on my Note 4
gerry11 said:
Thank you for all your work! It is pretty amazing.
The download 3.3.4 gives an error message when I try to install. 'Can not parse'
Perhaps it is faulty?
Click to expand...
Click to collapse
Unistall preview zeroner version.
Download again.
if no work.
Try to install Zeroner 3.3.4 chinese.
Tell me if chinese works to check my version.
gerry11 said:
Downloading was not the problem . When installing the apk it gives an error message on my phone.
I never had this issue before with the translated apk's of roninzgz.
Click to expand...
Click to collapse
Yeah, because it doesn't download correctly. Only a few bytes. Same here.
Best regards
roninzgz said:
Unistall preview zeroner version.
Download again.
if no work.
Try to install Zeroner 3.3.4 chinese.
Tell me if chinese works to check my version.
Click to expand...
Click to collapse
Yes, now it worked. Thank you very much.
Thanks, very nice work! I am currently translating the app into german and it is hard work I will share my work, when I am done.
Hi.
Someone knows how to activate on the miui`s firmware function Unlock with Bluetooth devise?
Smart unlock with I5 Plus
rizzotti91 said:
Hi, is there the possibility of a smart wakeup like the Xiaomi Mi Band?
Click to expand...
Click to collapse
Lovetz said:
No.
Click to expand...
Click to collapse
Actually, I found a way to do it (and I am using a bloody Xiaomi Redmi Note 2 Prime).
I have Lollipop 5.0.2 on (Miui Dev 5.11.26 EU), but I guess you can adjust these steps, in according to your ROM.
First:
you have to find the Bluetooth address of your wristband.
In my case (RN2 Prime) Go to > Settings > Privacy > Unlock by Bluetooth device > You'll see the I5 Plus, not with its name (Braceli5-1060, in my case), but with its address (i.e. C4:B4:E1:22:2B:21).
Take note of this address.
Second:
Download this app (or any other apk doing Bluetooth pairing): Bluetooth Pair (https://play.google.com/store/apps/details?id=com.waylonhuang.bluetoothpair) - it's free, no ads (I mean, I have AdAway.. so...).
Open Bluetooth Pair and
go to > Settings > Settings: Recently Connected > Type here the Bluetooth Address you noted before.
Go back to Bluetooth Pair main window: now you'll see there is your I5 Plus listed, so, tap on 'Connect'.
Now you can also uninstall Bluetooth Pair.
Third:
Go to > Phone Settings > Privacy (or security) > Smart Lock > Trusted Devices > Add one > Now, our friend I5 Plus is finally listed, and you can VIP-list it for Smart Bluetooth Unlock.
Hell yeah.
PS. If you use Macrodroid or Automate, or Tasker, once you have the bluetooth address of your I5 Plus, you can easily make a macro for it.
PS2. @roninzgz you my hero! Thanks for this thread and all your work
Hello, I have 2.00.9. Zeroner 3.3.4 finds a new firwmare version but it remains on "Cheking version" for hours and nothing happens. What should I do to upgrade?
giardux91 said:
Hello, I have 2.00.9. Zeroner 3.3.4 finds a new firwmare version but it remains on "Cheking version" for hours and nothing happens. What should I do to upgrade?
Click to expand...
Click to collapse
Bracelet lost connection to phone during process. **** happens, just don't wait hours, if it is stucked for half a minute, go back and try again, and again.

[Custom ROM] LeTv x500 by BB72 Multi Language Based on [Stock ROM] X507 Indian

[Custom ROM] LeTv x500 by BB72 Multi Language 008S 5.5.0 Based on [Stock ROM] X507 Indian
This rom is based on the EUI 5.5 version x507 (Le1s model for the Indian market)
Features:
- Multilingual Framework
- Root-date with the latest version SuperSu track
- Option added in the settings Reboot
- Concealed button sleep and Power off the top right corner of the status bar
- Added notification and alarm sounds
- New Client Email
- Changed size photos contact incoming call / output
- Bootloader Unlocked (the Indian version has locked bootloader)
- Broadband 900 3G available
- Other
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prerequisites:
I) Battery charge at least 80%
II) Driver adb properly installed on your PC
DOWNLOAD:https://mega.nz/#!M8oADZaQ!d-hq3uFKS3j-BW4cd1e2imKZ9BBhoZVaucRWcn97L8U
(right-click on the .exe file and run as administrator)
1.)First, since we have to flash a new rom we need a modified recovery
so we're going to download the TWRP recovery that will allow us later to flash the rom itself.
DOWNLOAD:https://mega.nz/#!gksDQITR!LJjsC3wpgMc3zlZfkxldVDLfgRQy_RLTBynE4N1mTLE
2.)Go to Settings>About phone and hit the build number 7 times to unlock developer options menu.
Enable USB DEBUG and connect the smartphone to the PC via USB cable.
3.) Click on the pc Install_LETV_x500_recovery_BB72_GS_2860.exe command
and follow the instructions in the command prompt.
4.) the smartphone will reboot into recovery TWRP powered By BB72
Installation:
- Installing from TWRP recovery
- Take a Nandroid backup of the ROM currently in use
- From TWRP recovery (wipe advanced -> cache / data / Dalvik / system)
- Install zip (select the zip of the ROM)
- Restart (watch the first boot is long)
- Access to Playstore and make app updates (when first starting the Playstore will be updated. We recommend an additional restart)
During install to recovery you will see a warning on the mounting of the system: normal
NOTE: If you have problems with notifications:
1. Lock the app with a swipe down from taskmanager so it looks a padlock
2. From Settings / Licence Policy / Management start make sure you have given the boot to boot to the app you want to receive notifications
3. From Settings / Battery / Intelligent energy saving DISABLE make sure the app you want to receive notifications
NOTE: If after doing all the steps to receive notifications WAPP, telegram, ETCC (eg block the app, set to start automatically at boot time, etc ...) you still have problems notifications, then try with a wipe "Internal storage "from TWRP. Such wipe erases all personal files (video, photos, music, documents etc ..) therefore you do a complete backup on PC
Download link:
https://mega.nz/#!ZZRnySBS!ScLwI-73s5DeqNP1xEm2rln6CNofRLechBYGNuMNop4
Another download link:
https://cloud.mail.ru/public/72qe/G4VnS3vxh
Original link (Translated into English):
https://translate.google.com/transl...basata-su-eui-507-versione-indiana-stock.html
Original link:
http://www.androidiani.com/forum/mo...basata-su-eui-507-versione-indiana-stock.html
Reserved
[Custom ROM] LeTv x500 by BB72 Multi Language 12S Based on [Indian Stock ROM X507]
This rom for x500 is based on the EUI 5.5 version x507 (model S Le1 marketed in India)
CHANGELOG:
- Aligned to the 12S version
- Fixed the ability to add new System Fonts (thanks @ Cuoco92 )
- Multi Language
- Rooted
- Launcher modded (Google search and swipe upwards to access the dialer)
- Tap the right side of the status bar to sleep, Tap long to shutdown / reboot
- UMTS Broadband 900 present
- Opera Browser functioning
- More....
NOTES:
- When you change the system Fonts, wait for it to return the message to restart your phone and only then proceed to restart
- The change of the font size from the app you use to change the font, does not work and therefore should not be used
- Access to remote controller generates the start of the locale which often remains in the background even when you exit the remote control, so I highly recommend you keep getting turned off the location (GPS) and activate it only when you need (this is a good idea to do always)
- When you set a password or PIN to unlock the account you are asked to login LeTV, just that outputs with the back button
INSTALLATION:
- Coming from ROM CHINA is required to wipe data / cache / Dalvik (if you want to also system: in this case you get a warning during installation but it is completely normal)
- Coming from INDIA ROM you can try to do an installation with only wipe cache / Dalvik but if you are having force close must proceed to perform installation with all wipes
DOWNLOAD:
https://mega.nz/#!5IB10JCD!V968MBc_KOAOaMpz0XlJziX6aRJao8l-_s2UIYhQ5VM
Size: 1.30Gb
INFO:
https://translate.googleusercontent.com/translate_c?depth=1&hl=en&rurl=translate.google.rs&sl=it&tl=en&u=http://www.androidiani.com/forum/modding-letv-x500/502059-rom-letv-x500-bb72-basata-su-eui-507-versione-indiana-stock.html&usg=ALkJrhh6brRTkCbM3AcZApVlXHSem35UiQ#post7395007
http://www.androidiani.com/forum/modding-letv-x500/502059-rom-letv-x500-bb72-basata-su-eui-507-versione-indiana-stock.html#post7395007
---------------------------------------------------------------------------------------------------------------------------------------------
DOLBY ATMOS:
thanks @worstenbrood from xda
03-dap_r6.5.zip
https://mega.nz/#%21sAZQhRIZ%219l0aEiw9dP7xWi0uHA0rGDKDEpn8zvKrmF6tYU5JKA0
Installing from recovery without wipes
--------------------------------------------------------------------------------------------------------------------------------------------
LAUNCHER MOD Drawer 4x4 (4 icons in dock):
https://mega.nz/#!MEIXAQ4Y!ht2767dIv1HChI1fCQQhDpN1lvaUQa3XgHnvm75TbyY
Installing from recovery without wipes
--------------------------------------------------------------------------------------------------------------------------------------------
Yahoo Weather Problem
Yahoo Weather comes preinstalled with
[Custom ROM] LeTv x500 by BB72 Multi Language 12S Based on [Indian Stock ROM X507]
(Yahoo Weather is default app into Indian Stock ROM X507)
If Yahoo Weather not working normally on your phone
and you have a problem with this app!
1.) With Root explorer or ES File Explorer(Tools-Root Explorer enabled)
go to
system/vendor/operator/app
and delete
yahoo_weather (folder)
2.) Reboot your phone
uninstall/delete
Yahoo Weather
3.) Install Yahoo Weather from Play Store
P.S.
Whether for lack of time (it is impossible to continue with two versions of rom)
but also because it makes no sense to continue with the Chinese version of the rom,
I will bring forward the development of the only Indian rom (at least that for the 12S and then we'll see)
https://translate.googleusercontent.com/translate_c?depth=2&hl=en&rurl=translate.google.com&sl=it&tl=en&u=http://www.androidiani.com/forum/modding-letv-x500/492828-modding-letv-x500-twrp-firmware-powered-bb72-208.html&usg=ALkJrhh52xXKKPnbrbMjrTI8B6asPBBe8A#post7437032
DOLBY ATMOS:
thanks @worstenbrood from xda
03-dap_r6.5.zip
https://mega.nz/#%21sAZQhRIZ%219l0aEiw9dP7xWi0uHA0rGDKDEpn8zvKrmF6tYU5JKA0
Installing from recovery without wipes
Update
Thanks for the great rom
Absolutely like this rom.
Keep up the greatwork:good:
LAUNCHER MOD Drawer 4x4 (4 icons in dock):
https://mega.nz/#!MEIXAQ4Y!ht2767dIv1HChI1fCQQhDpN1lvaUQa3XgHnvm75TbyY
Installing from recovery without wipes
My installation procedure :
1.) Frst in TWRP make backup of the existing system.
2.) Download and copy (S1_x500_ML_byBB72_GS_BASED_X507_5.5.012S_r2) to phone
3.) Switch off phone and go to TWRP
4.) Coming from ROM CHINA is required to wipe data / cache / Dalvik /system
(in this case you get a warning during installation but it is completely normal)
during installation procedure as like little paused then goes normally
Do not delete internal memory!!!
5.) Start install procedure
P.S.
After installing a new ROM
It is unusual and does not happen to everyone.
(If you notice that something is not working as it should.)
Reboot your phone.
Yahoo Weather Problem
Yahoo Weather comes preinstalled with
[Custom ROM] LeTv x500 by BB72 Multi Language 12S Based on [Indian Stock ROM X507]
(Yahoo Weather is default app into Indian Stock ROM X507)
If Yahoo Weather not working normally on your phone
and you have a problem with this app!
1.) With Root explorer or ES File Explorer(Tools-Root Explorer enabled)
go to
system/vendor/operator/app
and delete
yahoo_weather (folder)
2.) Reboot your phone
uninstall/delete
Yahoo Weather
3.) Install Yahoo Weather from Play Store
hi @laikexpert
first of all thanks for your work.
I've noticed two things so far, using this ROM:
-when recording videos there's a strange noise, like a radio... don't know
-I'm not able to see notification for services in push mode, whatsapp works flawlessly, but gmail, for example, doesn't.
any help? thanks again mate
-Viber
-gmail
etc.
works flawlessly on my phone
-------------------------------------------------------
System settings/Display/LED Notification light
(all options enabled)
System settings/Battery/Smart battery for apps
(Disable auto-cleaning)
laikexpert said:
-Viber
-gmail
etc.
works flawlessly on my phone
-------------------------------------------------------
System settings/Display/LED Notification light
(all options enabled)
System settings/Battery/Smart battery for apps
(Disable auto-cleaning)
Click to expand...
Click to collapse
don't know...
now push notifications work....
but the rear camera does not work anymore....
It doesn't recognize rear camera... even with other apps (wa,open camera) it allows just the front camera.... what happened? do I have to flash it again?
checking with device specs app it doesn't see it, just the front facing one
fefferico said:
don't know...
now push notifications work....
but the rear camera does not work anymore....
It doesn't recognize rear camera... even with other apps (wa,open camera) it allows just the front camera.... what happened? do I have to flash it again?
checking with device specs app it doesn't see it, just the front facing one
Click to expand...
Click to collapse
Did you flash it with clean install? (data, cache, Dalvik wipe)
Yeah mate...but even with the aosp version it says that there's no rear camera. Tonight once home I'll try to flash the version that came with the device itself.. But it seems to me a hw fault.. Even with no falls, just 4days
laikexpert said:
-Viber
-gmail
etc.
works flawlessly on my phone
-------------------------------------------------------
System settings/Display/LED Notification light
(all options enabled)
System settings/Battery/Smart battery for apps
(Disable auto-cleaning)
Click to expand...
Click to collapse
mega is not working for me .Please post any other links
Kanth's
BB72 012S
DOWNLOAD:
https://mega.nz/#!5IB10JCD!V968MBc_KOAOaMpz0XlJziX6aRJao8l-_s2UIYhQ5VM
Size: 1.30Gb
I tested the link is operating normally!

[CLOSED][ROM] [UNOFFICIAL] [PhhGSI 12][MicroG] for OnePlus Nord N10

Treble ROM based on Phh Treble 12 with MicroG, signature spoofing, Feb 05 security patch and most FOSS apps.
Even it's treble rom it builds for Nord 10 5G, some stuff I removed, not sure about other models.
After some people ask me to put more stuff in my personal build I made more fat ROM to share here.
Be aware still very slim ROM!!!
Tested on model BE86AA 11.02 and 11.03 vendors.
Inside:
AntennaPod -podcast manager/player
SoftUI Calculator
Etar -calendar
EteSync - encrypted sync contacts,calendar and tasks
Fdroid with extra repos (microg and unoficial F-Droid)
Latest MicroG and location backends:
NominatimNlpBackend
MozillaNlpBackend
DejaVuLocationService
K9Mail -email client
KeePassDX - password Manager
Lawnchair12 - launcher
SmpleGalleryPro -Gallery
MiXplorer - File Manager. Clean chache and storage in case of problem at beggining.
Foss Browser - Browser
MupdfViewer - Pdf Viewer
Music Player Go - Music Player
NewPipe - YouTube replacement
NextCloud - Google Drive alt
Notally - Notepad
OAndBackup - Backup utility
OpenCamera - Camera
OpenTasks
Photok - Encrypted Photo Safe for Android
RethinkDns - Firewall+DNS+Ad Blocker
QKSMS - messenger
Signal - messaging/chat/calls/voip calls
SimpleReboot - reboot w/o buttons
WaveUp - Gravity Screen alternative
Weather - Geometric Weather
Bromite-Webview
What Works:
For me all that I and my wife needed. My wife on Dec rom, won't change anything. Me on latest rom with less stuff..
Source
Release AOSP 12.0 v402 · phhusson/treble_experimentations
More February security patch level (previous one had only some patches, not all) Available as OTA from v401 in Treble Settings => Updater
github.com
Requerements:
Unlocked bootloader, Android 11, adb installed, some knowledge
Allready rooted/phh su
Installation
There is two versions rw and ro.
Download what you need
Unpack
Inside you find:
All related img files
flash.bat - Windows
flash.sh - Linux
install.txt - terminal and manual instruction
mi folder - some themes for MiXplorer
Backup all your data because it would be deleted!!!
I'm not responsible for any loss or damage!!!
When inside folder start from terminal/command prompt ./flash.bat or ./flash.sh
Wait untill done ~ 5 min
Downloads
RW
RO​Some tips:
For navigation I use Magic Earth, but GMaps works too.
My banks and airline apps working you have to test your stuff.
Aurora Store should work if you need some stuff from Goole Play install it from FDroid and try.
Don't forget to give some permissions in MicroG and enable location backends.
90FPS
90 FPS can be enabled in Settings/Phh Treble Settings/Misc Features/Forse FPS
or in Settings/Display/Smooth Display with would auto adjust fps
or Settings/Dev Options/Force Pick refresh rate and to be sure Show refresh rate
MiXplorer
If MiXplorer wan't works right from start just clear cache and storage Setting/Apps/MiXporer/Storage & Cache
To import extra skins for MiXplorer copy files that I provided to storage, open MiXplorer navigate to files, short click on file and import to apply
3.5 jack
If got problems with sound enable Alternative audio policy in Setting/Phh Treble Settings/Qualicomm Features
Other
There is 2 launchers -Stock and Lawnchair12. Free to remove any but keep stock if you wanna Recent App view.
Any apps from rw version can be removed.
If for some reason rom won't boot don't panic and try to hard reboot (hold power button)
Enjoy!
r/w link not working but i got it!
you just did a typo
PopCaps1996 said:
r/w link not working but i got it!
you just did a typo
Click to expand...
Click to collapse
Don't use link inside install.txt it old.
gives me this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fersabi said:
gives me this error
View attachment 5543415
Click to expand...
Click to collapse
You not in fastboot mode. After reboot in bootloader you do fastboot reboot fastboot before flash.
Check install.txt file for manual order.
fersabi said:
gives me this error
View attachment 5543415
Click to expand...
Click to collapse
you need fastbootd driver
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com
Updated - MusicPlayer, KeepassDX, StinglePhotos,Signal
Fix problem with ImagePipe, replaced LeafPics with SimpleGallerPro
Added Photok as secure safe media on local drive.,QR Barcode.OpenBoard
This Gsi is good but not great without of Auto Brightness, is a kind of killer.
There must be some requirments regarding this Gsi:
Auto Brightness
Live Display with Picture adjustment
Dirac Audio Tuner
without pre rooted
must include Stock Camera
with Oneplus Stock Dialer,contact and messaging apps
With google play services and support
Hello.
Thanks for all the work and time it's wonderful.
I have a couple problems I have been reaching and unable to fix them.
My phone is a OPO nord n10 5g unlocked. I had no problem installing the ROM. Since day one my 5g will not work only 3g on the T-Mobile network. I have fixed this problem in the past with not much problem, been weeks and still no fix. Every time I try to change the APN and reboot the phone switches back the APN she was set to during the setup and still on super slow 3g.
Do you know the T-Mobile 5g APN for the Tampa FL area I don't thinkit makes a difference.
2. Since the install of your ROM the when I open most apps microG like magic earth and other apps I get a microG core error and if I type to the side the app king of works guidance kept the vocals going but the visual was frozen. Any way fix this maybe update microG. I also have Vanced YouTube instaled with microG not sure if this will cause a problem.
Thasnks in advance.
Tony
tsman said:
Hello.
Thanks for all the work and time it's wonderful.
I have a couple problems I have been reaching and unable to fix them.
My phone is a OPO nord n10 5g unlocked. I had no problem installing the ROM. Since day one my 5g will not work only 3g on the T-Mobile network. I have fixed this problem in the past with not much problem, been weeks and still no fix. Every time I try to change the APN and reboot the phone switches back the APN she was set to during the setup and still on super slow 3g.
Do you know the T-Mobile 5g APN for the Tampa FL area I don't thinkit makes a difference.
2. Since the install of your ROM the when I open most apps microG like magic earth and other apps I get a microG core error and if I type to the side the app king of works guidance kept the vocals going but the visual was frozen. Any way fix this maybe update microG. I also have Vanced YouTube instaled with microG not sure if this will cause a problem.
Thasnks in advance.
Tony
Click to expand...
Click to collapse
You need update microg. Drop what version you have in private message and I give you link to different microg. For T-Mobile if I recall right they have some apps installed on stock that control apn. don't have T-Mobile version to look at it. Also check if there is imssettings apk.It shoud be in product I guess. If not try to install it.
LOL
Oops
Tony
@boom15
can you rebuild the gsi with a13
GitHub - TrebleDroid/treble_experimentations: Scripts to automatically build/CI/Release TrebleDroid GSI
Scripts to automatically build/CI/Release TrebleDroid GSI - GitHub - TrebleDroid/treble_experimentations: Scripts to automatically build/CI/Release TrebleDroid GSI
github.com

Categories

Resources