Edited the library of the camera that allowed to add 240 fps + there will be no loss of frames in poor lighting at 1080 60fps, slow motion also works in gcam. I apologize for the themes I can not draw up but I really wanted to share the achievement
download link:
drive.google.com/file/d/1rV6QYFz4qt5FCg_X8rFrepvSGsdvtYRN/view?usp=sharing
AlexKawr said:
Edited the library of the camera that allowed to add 240 fps + there will be no loss of frames in poor lighting at 1080 60fps, slow motion also works in gcam. I apologize for the themes I can not draw up but I really wanted to share the achievement
download link:
drive.google.com/file/d/1rV6QYFz4qt5FCg_X8rFrepvSGsdvtYRN/view?usp=sharing
Click to expand...
Click to collapse
Hey! Question about this; is this suppose to unlock 240 fps in the HTC camera or Google camera?
240
hello, in the htc camera unfortunately only works 1080 120 as it was always, there is no choice 240 there. I just did that in u11 worked 240 fps and any program that supports slow motion will be
AlexKawr said:
hello, in the htc camera unfortunately only works 1080 120 as it was always, there is no choice 240 there. I just did that in u11 worked 240 fps and any program that supports slow motion will be
Click to expand...
Click to collapse
Can you please give us the name of the camera app you use
Zero2098 said:
Can you please give us the name of the camera app you use
Click to expand...
Click to collapse
I use the camera for recording 240 "snap hdr camera" for the rest I use either gcam or standart. I can throw off the configuration file that needs to be thrown off to the root of the internal memory, then in snap hdr in the settings it will be necessary to press to load and then on p2 there will be a mo mo 240 720
AlexKawr said:
I use the camera for recording 240 "snap hdr camera" for the rest I use either gcam or standart. I can throw off the configuration file that needs to be thrown off to the root of the internal memory, then in snap hdr in the settings it will be necessary to press to load and then on p2 there will be a mo mo 240 720
Click to expand...
Click to collapse
Sure please
Zero2098 said:
Sure please
Click to expand...
Click to collapse
This file is simply unzipped and written to the internal memory
AlexKawr said:
This file is simply unzipped and written to the internal memory
Click to expand...
Click to collapse
Thank you for your hard work
AlexKawr said:
Edited the library of the camera that allowed to add 240 fps + there will be no loss of frames in poor lighting at 1080 60fps, slow motion also works in gcam. I apologize for the themes I can not draw up but I really wanted to share the achievement
download link:
drive.google.com/file/d/1rV6QYFz4qt5FCg_X8rFrepvSGsdvtYRN/view?usp=sharing
Click to expand...
Click to collapse
Thanks for contributing to this dying phone
I'm not a pro, but i love to tinker with stuff
found a mistake in your Media_Profiles file from 91st line
Code:
<EncoderProfile quality="720p" fileFormat="mp4" duration="240">
<Video codec="h264"
bitRate="80000000"
width=""
height="1080"
frameRate="240" />
Feel free to use my Media_Profile file, in Which i've enabled HEVC (H265) codec, Inspired from H265 Magisk Module from OP3T forum
Also added your Highspeed 240fps.
thank u, please correct me if i'm wrong
ravish_919 said:
Thanks for contributing to this dying phone
I'm not a pro, but i love to tinker with stuff
found a mistake in your Media_Profiles file from 91st line
Code:
<EncoderProfile quality="720p" fileFormat="mp4" duration="240">
<Video codec="h264"
bitRate="80000000"
width=""
height="1080"
frameRate="240" />
Feel free to use my Media_Profile file, in Which i've enabled HEVC (H265) codec, Inspired from H265 Magisk Module from OP3T forum
Also added your Highspeed 240fps.
thank u, please correct me if i'm wrong
Click to expand...
Click to collapse
thanks for the amendment, I did not notice)
Hey there, I'm having trouble with this mod. I have flashed the module from op, then bought the snap her camera app, loaded your settings and when I try to start a video in p2, the camera app just crashes. I've tried manually replacing the media profiles with the "corrected one" and it seems to not work either. What am I missing?? Thanks
Jbb3393 said:
Hey there, I'm having trouble with this mod. I have flashed the module from op, then bought the snap her camera app, loaded your settings and when I try to start a video in p2, the camera app just crashes. I've tried manually replacing the media profiles with the "corrected one" and it seems to not work either. What am I missing?? Thanks
Click to expand...
Click to collapse
check maybe in camera settings not activated 2api
AlexKawr said:
check maybe in camera settings not activated 2api
Click to expand...
Click to collapse
Thanks for the reply but still no luck. Any chance you could screenshot or write out all you exact settings?
Hi, I want to ask about camera fps setting.
If I want to change my stock camera to 25 fps intead 30 fps. Can this be done by changing the framerate inside media_profiles_vendor.xml file.
I have problem with 30 fps setting, for it sometimes flickering with 50 Hz indoor lamp.
the link seems to be down. Can someone please contribute the download file? Thanks a bunch.
The link was down. There is no file anymore. Someone who downloaded this module, can you upload it and share new link in this thread please?
I'm personally not sure if this still works on PIE but give it a go and let us know....
https://t.me/whynotjustshare/2
Related
Hi, I tried the G3's camera and I'm really impressed by the splendid quality, untill I tried out the slow-motion feature. I know that there's this camera tweak that you have to flash or manually move the apk and stuff
(For those who are looking for a mod that improves 4k bitrate as well as the 1080p fps count: http://forum.xda-developers.com/showthread.php?t=2778570) (Credit for this goes to the developer). But I'm wondering wether there is a camera mod that enables a higher resolution video/camera and bitrate for the slow-mo mode of the G3, right now it's set at 720p at 120fps, but when saved, the file seems only 120p, the fps is great but there's so many pixels and it's a shame for the awesome 4k screen that the G3 is packed with! (I'm not sure about the exact numbers though, could be false) Any help is greatly appreciated!:good:
Neorpowa said:
Hi, I tried the G3's camera and I'm really impressed by the splendid quality, untill I tried out the slow-motion feature. I know that there's this camera tweak that you have to flash or manually move the apk and stuff
(For those who are looking for a mod that improves 4k bitrate as well as the 1080p fps count: http://forum.xda-developers.com/showthread.php?t=2778570) (Credit for this goes to the developer). But I'm wondering wether there is a camera mod that enables a higher resolution video/camera and bitrate for the slow-mo mode of the G3, right now it's set at 720p at 120fps, but when saved, the file seems only 120p, the fps is great but there's so many pixels and it's a shame for the awesome 4k screen that the G3 is packed with! (I'm not sure about the exact numbers though, could be false) Any help is greatly appreciated!:good:
Click to expand...
Click to collapse
No there's not the drives will not allow to improve the slow mo
_Infamous_ said:
No there's not the drives will not allow to improve the slow mo
Click to expand...
Click to collapse
Ahh thats too bad ..
Thanks for your quick reply anyway!!:good:
Is there any way to enable Full HD/60fps recording? The CPU and camera hardware is capable to do more than this.
Have you tried with Open Camera
https://play.google.com/store/apps/details?id=net.sourceforge.opencamera&hl=sv
Or Cinema FV-5
?
https://play.google.com/store/apps/details?id=com.flavionet.android.cinema.lite&hl=sv
-Zteam- said:
Have you tried with Open Camera
hxxxm/store/apps/details?id=net.sourceforge.opencamera&hl=sv
Or Cinema FV-5
?
hxxpxxxe/apps/details?id=com.flavionet.android.cinema.lite&hl=sv
Click to expand...
Click to collapse
I did, even with 60/120 fps setting on Open Camera the video has 30fps
dreszczyk said:
I did, even with 60/120 fps setting on Open Camera the video has 30fps
Click to expand...
Click to collapse
This app seems to work for the Xiaomi Redmi Note 3, please try it out and let me if it works on the Mi6 as well:
https://forum.xda-developers.com/redmi-note-3/themes/google-camera-hdr-60fps-t3656675
If it doesn't work, you can try with this app if you want to:
https://forum.xda-developers.com/search/thread/3115548?query=xiaomi
-Zteam- said:
This app seems to work for the Xiaomi Redmi Note 3, please try it out and let me if it works on the Mi6 as well:
https://forum.xda-developers.com/redmi-note-3/themes/google-camera-hdr-60fps-t3656675
If it doesn't work, you can try with this app if you want to:
https://forum.xda-developers.com/search/thread/3115548?query=xiaomi
Click to expand...
Click to collapse
Ungortunately, none of these work
EDIT:
The first one force-closes and the second produces black images.
dreszczyk said:
Ungortunately, none of these work
EDIT:
The first one force-closes and the second produces black images.
Click to expand...
Click to collapse
I figured out that you need to enable Camera2 Api. The app does open and gives you the opportunity to take '60 FPS' videos, however the videos aren't really 60 FPS.
Here's a link if you want to play a little bit
https://www.reddit.com/r/Android/comments/6tklw0/magisk_module_to_enable_camera2_api_to_use_with/
dreszczyk said:
Ungortunately, none of these work
EDIT:
The first one force-closes and the second produces black images.
Click to expand...
Click to collapse
QuattroKwok said:
I figured out that you need to enable Camera2 Api. The app does open and gives you the opportunity to take '60 FPS' videos, however the videos aren't really 60 FPS.
Here's a link if you want to play a little bit
https://www.reddit.com/r/Android/comments/6tklw0/magisk_module_to_enable_camera2_api_to_use_with/
Click to expand...
Click to collapse
Did you guys made sure to set VideoFrameRate=60 in the videoprofile for 1080p inside freedcam?
If that's not helping you might consider asking the freedcam devs if they can make it possible over here?
https://forum.xda-developers.com/android/apps-games/camera-freedcam-4-0-3-t3115548
I did also find this, but it's for Mi4 not sure if it works on the Mi6, thought.
http://en.miui.com/thread-477750-1-1.html
Also there seems to be some changes about the camera in MIUI 9 (at least for longer exposure times for photos)
None of these apps work. It really sucks, they all crash or don't record at 60fps.
dingoyabuki said:
None of these apps work. It really sucks, they all crash or don't record at 60fps.
Click to expand...
Click to collapse
You can try with Bacon camera as well, it seems to have some support for Xiaomi Mi6, but I don't know if it allows you to record 60FPS.
If not you can always try to ask the freedcam or Bacon Camera developers if they can add support for it.
However it might be that the camera drivers doesn't provide support for it, if that's the case I don't think it is possible at all.
Freedcam thread is over here:
https://forum.xda-developers.com/and...4-0-3-t3115548
Bacon Camera is over here:
https://forum.xda-developers.com/gen...amera-t3253278
No. Literally no app can record at 60fps.
Improved 1080p recording and picture quality
root required
Open media.zip and find media profile xml file extract it and then you can replace.
steps
1) open es file explorer go to device>system>etc
2) find media_profile.xml in etc folder
3) replace it with this media_profile.xml
4) save and reboot.
1) Increased photo compression quality to 100%.
2) Increased video bitrate from 17mbps to 24 mbps can go upto 30mbps but fps drops so 24 is best.
3) Increased audio bitrate to 14000.
4) Increased front camera video bitrate to 20mbps.
5) Increased memcap to twice .
pros
1) Better 1080p video recording from both front and back camera.
2) Image quality of front is improved marginally.
3) In daylight video from rear camera are best .
4) More clear audio .
5) In low light pictures are better than stock.
6 ) sharp and clear video.
cons
1) In low light because of high bitrate video look more contrasted.
2 ) Very small change in picture quality in daylight.
This is screenshot of front camera video bitrate
Does it work in roms too?
Yes any rom
And could it be a way to improve slow motion camera, or default options are the only one??
I got bootloop
edit: nevermind, my mistake xD
I got a boot loop after replacing the file. I'm on aosp extended.
Same here..got boot loop on RR
ivan290 said:
And could it be a way to improve slow motion camera, or default options are the only one??
Click to expand...
Click to collapse
When I added slow motion media profile then also the video is 960*540 it means it may be libs problem
Soham Biswas said:
Same here..got boot loop on RR
Click to expand...
Click to collapse
I have updated the media profile download media2.zip and try again
The new file works ?
Aby lad said:
I have updated the media profile download media2.zip and try again
Click to expand...
Click to collapse
It worked..??
Works on Moto G4 no plus?
sofsamu said:
Works on Moto G4 no plus?
Click to expand...
Click to collapse
It works on moto g4 plus
I can't able to see any difference
@op
U ported stock camera for moto g4 plus
Can u plz send me the link to that thread
Is this thread active
akilan30 said:
Is this thread active
Click to expand...
Click to collapse
Why do you think it's not active? Cause nobody post something?
Fps has drop dramatically while recording video. Pls improve it so much of lag, OMG!!!??
strongst said:
Why do you think it's not active? Cause nobody post something?
Click to expand...
Click to collapse
Yes brother actually i thought that,but brother slo mo video has low clarity any help with that? Can yu?
akilan30 said:
Is this thread active
Click to expand...
Click to collapse
lol
Hi users! This is an old trick but some of users are facing some error. Is there any way to make it work perfectly?
Address= "HKLocalMachine\Software\OEM\Nokia\Camera\RFC\Resolution"
Key= "VideoResolution"
Value= "4"
Akki_X said:
Hi users! This is an old trick but some of users are facing some error. Is there any way to make it work perfectly?
Address= "HKLocalMachine\Software\OEM\Nokia\Camera\RFC\Resolution"
Key= "VideoResolution"
Value= "4"
Click to expand...
Click to collapse
This tweak requires hardware support, e.g. Snapdragon 200/400 can't work with 4K video.
That's why doesn't work on 520....
I get 30 frames on every resolution Lumia640xl.
augustinionut said:
I get 30 frames on every resolution Lumia640xl.
Click to expand...
Click to collapse
Cool now enjoy
Restore
How can I back to default setting?
Default value
zakabir4 said:
How can I back to default setting?
Click to expand...
Click to collapse
Simply change the value to 3
Error
I tried but when I turn on slow mode video and increase resolution, it shows error and no video capture!
Need hardware Requirement
zakabir4 said:
I tried but when I turn on slow mode video and increase resolution, it shows error and no video capture!
Click to expand...
Click to collapse
Due to low hardware this trick isn't working well for some users.
Device
My device is 640XL. But in a previous comment a user write that he is successful with same device.
zakabir4 said:
slow mode video !
Click to expand...
Click to collapse
What is your version of camera app? Where to find slomo setting?
Camera
Camera Version: 2017.1003.21.0
Slow motion is not working
Hardware issue
augustinionut said:
Slow motion is not working
Click to expand...
Click to collapse
Not working on some low end devices
Like 640xl.
Hi, strange user @Akki_X. JFYI, 4K video requires, first of all, camera with > 8Mp matrix (3840 pixels × 2160 pixels = 8.3 megapixels, aspect ratio 16:9). So, don't waste your (and others) time for posting this kind of useless and stupid hacks!
@sensboston
I agree. But it is not a stupid post, just one lacking needed research. Plus why open a seperate thread to discuss something that has already been posted...
On a side note. I thought you were upset at how W10M is turning out, interestingly you are still around adding to posts...
Chill dude
sensboston said:
Hi, strange user @Akki_X. JFYI, 4K video requires, first of all, camera with > 8Mp matrix (3840 pixels × 2160 pixels = 8.3 megapixels, aspect ratio 16:9). So, don't waste your (and others) time for posting this kind of useless and stupid hacks!
Click to expand...
Click to collapse
I was just asking about this trick because I wasn't sure about this and I thought some of users may could help about this so that I posted. My intention isn't wasting Your time to read this post. Let people try to ho forward, don't push Them behind. E.g- Project Astoria was dead... Now many users are keep focusing on that.
Thanks! ??
@nate0, did you get my point? To shoot 4K video, registry change is not enough (absolutely). First, you must have a 4K capable camera, second - your handset hardware must have enough performance and power to handle 4K video stream. There is no point to "research"; Nokia/MS engineers aren't stupid and nonprofessional. If your phone's camera not marked as "4K capable", you can't (physically) shoot 4K videos. Period.
Changing the registry value to 4 doesn't make your device shoot at 4k, the registry value 4 means the highest your camera support.
i.e. If your device shows maximum capture as 720p but, your camera can shoot 1080p because it supports it, for example 5MP camera, then the value 4 will enable 1080, not 2160(4k).
Hi Guys! Is there any GCam that working for Redmi Note 12 Turbo?
Or any compatible Gcam for Redmi Note 12 Turbo
use AGC8.4 by Bigkaka. And you will need a config for Mi12S ultra(yeah thats weird) to make it working
Using AGC8.4 will still FC when you use the front cam. You can fix it (make front cam stable) by changing the Lens settings of the front cam (System ID = 1). For now, avoid using the front cam. If it FCs, just open the app again and quickly use any rear facing cam or switch to video.
Raymond.William said:
use AGC8.4 by Bigkaka. And you will need a config for Mi12S ultra(yeah thats weird) to make it working
Click to expand...
Click to collapse
Does this have 4k 60fps video?
AGC8.4.300_V9.2_fix2.apk by BigKaka and jerbau-front_cam_103130.agc config works for me. I tested all 4 lenses and videorecording for maincam (4k60) No fc
xuxu1 said:
AGC8.4.300_V9.2_fix2.apk by BigKaka and jerbau-front_cam_103130.agc config works for me. I tested all 4 lenses and videorecording for maincam (4k60) No fc
Click to expand...
Click to collapse
Hi there... Can you bring the jerbau config here? Thanks before
I dont know If I'm allow to do so. But @jerbau is also here so maybe he will release. Otherwise you can find the config in the Poco f5 gcam telegram group
xuxu1 said:
I dont know If I'm allow to do so. But @jerbau is also here so maybe he will release. Otherwise you can find the config in the Poco f5 gcam telegram group
Click to expand...
Click to collapse
Oh, it's okay. I think i'll better wait for the release. Thanks before
Hi, if you are interested I have a partial config that I hope to complete sometime soon. You should be able to use all camera modules in normal mode. The front cam has portrait mode. You also can shoot 4K 60fps without any issue using the rear main cam.
Just rename the file (jerbau-marble-partial.agc.xml) to have a .agc file extension (remove .xml at the end).
Just let me know if you have any concerns.
jerbau said:
Hi, if you are interested I have a partial config that I hope to complete sometime soon. You should be able to use all camera modules in normal mode. The front cam has portrait mode. You also can shoot 4K 60fps without any issue using the rear main cam.
Just rename the file (jerbau-marble-partial.agc.xml) to have a .agc file extension (remove .xml at the end).
Just let me know if you have any concerns.
Click to expand...
Click to collapse
Wow... The gcam config creator... I'm really-really-really appreciating of your reply, mr/sir.
I would like to say big thanks for your share
*Update*
I've test it, and it's really work. No FC. Thank you very much again and again.
jerbau said:
Hi, if you are interested I have a partial config that I hope to complete sometime soon. You should be able to use all camera modules in normal mode. The front cam has portrait mode. You also can shoot 4K 60fps without any issue using the rear main cam.
Just rename the file (jerbau-marble-partial.agc.xml) to have a .agc file extension (remove .xml at the end).
Just let me know if you have any concerns.
Click to expand...
Click to collapse
It just works, big thanks man
jerbau said:
Hi, if you are interested I have a partial config that I hope to complete sometime soon. You should be able to use all camera modules in normal mode. The front cam has portrait mode. You also can shoot 4K 60fps without any issue using the rear main cam.
Just rename the file (jerbau-marble-partial.agc.xml) to have a .agc file extension (remove .xml at the end).
Just let me know if you have any concerns.
Click to expand...
Click to collapse
Hi @jerbau ,
thx a lot. The configuration works, until now I got no FCs.
But a few concerns.
The main camera looks like it is always some kind of zoomed in comparison to the original camera app even though the selection is set to 1x.
And the second one, the frontcam produces some kind of really wired images when taking a selfie and HDR or HDR+ is activated. It looks almost like some kind of "comic filter" gets put over the pictures .
Is there any chance to sort this out?
This is a more stable config. Please evaluate and check if this works out for you. Remember to rename file extension to .agc
Tested to work on AGC v8.4.
jerbau said:
This is a more stable config. Please evaluate and check if this works out for you. Remember to rename file extension to .agc
Tested to work on AGC v8.4.
Click to expand...
Click to collapse
It works!! Thank you. With the last config it's the first gcam that that doesn't FC in my phone but also it works flawlessly, amazing work. Also speaking about the photos they have a lot more detail thant the default miui camera.
Thanks
bmwbasti said:
Hi @jerbau ,
thx a lot. The configuration works, until now I got no FCs.
But a few concerns.
The main camera looks like it is always some kind of zoomed in comparison to the original camera app even though the selection is set to 1x.
And the second one, the frontcam produces some kind of really wired images when taking a selfie and HDR or HDR+ is activated. It looks almost like some kind of "comic filter" gets put over the pictures .
Is there any chance to sort this out?
Click to expand...
Click to collapse
Hi @jerbau,
many thanks, the configuration looks good
The zoom is gone and frontcam looks way better, even with activated HDR.
Some minor flaw: For me the macro lense wasn't activated. I only had the choice of backcamera and the ultrawide.
Regards
Basti
bmwbasti said:
Hi @jerbau,
many thanks, the configuration looks good
The zoom is gone and frontcam looks way better, even with activated HDR.
Some minor flaw: For me the macro lense wasn't activated. I only had the choice of backcamera and the ultrawide.
Regards
Basti
Click to expand...
Click to collapse
You can enable it through the app settings (lens configuration), but being honest, the macro camera is sort of pointless.
jerbau said:
This is a more stable config. Please evaluate and check if this works out for you. Remember to rename file extension to .agc
Tested to work on AGC v8.4.
Click to expand...
Click to collapse
your config is fantastic, thanks for your work.
With the old "mi" one, recording video in 4k60 is possible, with yours only 4k30.
Hi guys.
Sharing another config of papaji here (version 6)
Changelog:
Fixed the Watermark
Disabled focus tracking as it becomes buggy and messes up focusing sometimes
Added awb to all lenses (not needed in most cases but you can try enabling at times stock awb is giving a yellow/green tint, it might fix it)
Experimental config (version 7)
Changelog:
Changes mostly in colour and white balance and front camera
Share your feedback. Thanks!
Remember to import these configs after renaming the filename with the extension .agc first.
One small question thou and I'm getting my Gcam from Gcam Hub.
Is it better to use the AGC_8.4.300_V9.7 or use AGC_8.4.300.18_V9.2 ?