Hello xda ppl!
may be it will be useful for you.
many time was spent trying to do something good with this cpu,
to make it not so hot but fast and efficient.
so, here cooling is priority.
1. global configs
memory, cpu, gpu, thermal, doze ...
for android 6-7-8
files "thermal-engine.conf", "init.qcom.post_boot.sh"
paths detecting via existing thermal config
existing files backup ("~" suffix)
installation output, at the end there should be listing of 2 new and 2 backuped files
to revert just rename backuped files (root/twrp file manager)
2. profiles switch from status bar
its simplification of this one https://forum.xda-developers.com/android/apps-games/app-spectrum-kernel-manager-users-t3601542
for android 6-7-8 (but only if your OS has support of initialization from "/system/etc/init" (its standard))
files "/system/app/Spectrum/Spectrum.apk", "/system/etc/init/init.spectrum.rc", "/system/etc/init/init.spectrum.sh"
installation output, at the end there should be listing of 3 new files
to revert just install "SimpleSpectrum-uninstall.zip"
global configs + performance profile should be good for games.
and cool. like COOL1 should be
XDA:DevDB Information
cpu_tuning-difrED, Tool/Utility for the Coolpad Cool1
Contributors
difr
Version Information
Status: Beta
Created 2018-08-29
Last Updated 2018-08-29
1. configs script didnt work and didnt make error in case of absent thermal config in system (i didnt expect such case). so, i've made small update.
2. spectrum app no need root so often. also updated.
3. i also recommend to disable standard power control, just rename "/system[/vendor]/lib64/hw/power.qcom.so" to "power.qcom.so~". attached zip is for this purpose.
4. i see some donwloads and no one review it. it's bad. bad community, sorry
I will try now on los 15.1 beta
Edit : Im Already flash on los 15.1 and installed but can't open spectrum app, in playstore say installed but cant open ? And in launcher not see icon spectrum, i replace with 1.5 version work nice
Fauzi Hamzah said:
I will try now on los 15.1 beta
Edit : Im Already flash on los 15.1 and installed but can't open spectrum app, in playstore say installed but cant open ? And in launcher not see icon spectrum, i replace with 1.5 version work nice
Click to expand...
Click to collapse
its hidden in launcher. its available in status bar as tile
difr said:
its hidden in launcher. its available in status bar as tile
Click to expand...
Click to collapse
Ok i will try replace again with your app
Edit : it work but not see gaming profile
Bro since leeco los have smanager maybe you can add mod for this https://4pda.ru/forum/index.php?s=&showtopic=911910&view=findpost&p=75788964 , i think it will be conflict
Edit again ?, not will conflict just delete profile in smanager if use this
@Fauzi Hamzah
3 modes.
difr said:
@Fauzi Hamzah
3 modes.
Click to expand...
Click to collapse
Ok thanks bro for now just test battery mode, because not have heavy game , lazy to download ?, waiting black desert mobile global need long time
Btw thermal config in oreo just in vendor/etc ?, not see in /etc
Fauzi Hamzah said:
Ok thanks bro for now just test battery mode, because not have heavy game , lazy to download ?, waiting black desert mobile global need long time
Btw thermal config in oreo just in vendor/etc ?, not see in /etc
Click to expand...
Click to collapse
right. means oreo also is without thermal config. didnt know it
seems like all le2 ports are without thermal config
did you see patch output?
it should show error, unable to find thermal config
means patch doesnt do his work
need to rewrite it again for oreo
please, confirm that you dont see /vendor/etc/thermal-engine.conf
difr said:
right. means oreo also is without thermal config. didnt know it
seems like all le2 ports are without thermal config
did you see patch output?
it should show error, unable to find thermal config
means patch doesnt do his work
need to rewrite it again for oreo
please, confirm that you dont see /vendor/etc/thermal-engine.conf
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=1LRcwuqfzXldGofnPdxiH5_DaZxwIDuiY&usp=sharing , you mean logcat ? and i cant upload on attach xda ?
Edit : Oh i see already edit v6 on /vendor/etx
Btw is possible to add fast charge like another phone ?
difr said:
Hello xda ppl!
may be it will be useful for you.
many time was spent trying to do something good with this cpu,
to make it not so hot but fast and efficient.
so, here cooling is priority.
1. global configs
memory, cpu, gpu, thermal, doze ...
for android 6-7-8
files "thermal-engine.conf", "init.qcom.post_boot.sh"
paths detecting via existing thermal config
existing files backup ("~" suffix)
installation output, at the end there should be listing of 2 new and 2 backuped files
to revert just rename backuped files (root/twrp file manager)
2. profiles switch from status bar
its simplification of this one https://forum.xda-developers.com/android/apps-games/app-spectrum-kernel-manager-users-t3601542
for android 6-7-8 (but only if your OS has support of initialization from "/system/etc/init" (its standard))
files "/system/app/Spectrum/Spectrum.apk", "/system/etc/init/init.spectrum.rc", "/system/etc/init/init.spectrum.sh"
installation output, at the end there should be listing of 3 new files
to revert just install "SimpleSpectrum-uninstall.zip"
global configs + performance profile should be good for games.
and cool. like COOL1 should be
XDA:DevDB Information
cpu_tuning-difrED, Tool/Utility for the Coolpad Cool1
Contributors
difr
Version Information
Status: Beta
Created 2018-08-29
Last Updated 2018-08-29
Click to expand...
Click to collapse
seems to work in lineage 15.1! thank you very much, it's very convenient and useful! (on v6 version)
cant understand. does it work in oreo?
do you see /vendor/etc/thermal-config.conf (with my sign inside).
@Fauzi Hamzah, no i dont mean logcat. i mean installation output in twrp. there must be detailed listing of processed files or error message
i use it in jui7. didnt test it in other roms
difr said:
cant understand. does it work in oreo?
do you see /vendor/etc/thermal-config.conf (with my sign inside).
@Fauzi Hamzah, no i dont mean logcat. i mean installation output in twrp. there must be detailed listing of processed files or error message
i use it in jui7. didnt test it in other roms
Click to expand...
Click to collapse
Ok i will reflash again, but in vendor/etc already with you mod thermal v6 but not see init.qcom
Fauzi Hamzah said:
Ok i will reflash again, but in vendor/etc already with you mod thermal v6 but not see init.qcom
Click to expand...
Click to collapse
it must be in /vendor/bin in oreo
difr said:
it must be in /vendor/bin in oreo
Click to expand...
Click to collapse
Yeah you're right and already mod v6 :good:
This first time i use oreo so dont know at all
I think it work like a charm
Can you add fast charging like this https://forum.xda-developers.com/ne...d-xthermal-mod-fast-charging-cpu-gpu-t3477639
Fauzi Hamzah said:
Can you add fast charging like this https://forum.xda-developers.com/ne...d-xthermal-mod-fast-charging-cpu-gpu-t3477639
Click to expand...
Click to collapse
no, its enough hot without fast charging
wtf,
more than 50 downloads
noone reviewed.
difr said:
wtf,
more than 50 downloads
noone reviewed.
Click to expand...
Click to collapse
maybe you can create for universal not just this phone: D
I test pubg not heating like before (nougat without config) and now use this config with gpu turbo boost v2, I can get HDR 60fps in 960p resolution use gfx tool with some fps drop but still playable :good:
C107-9
Can all this tweak work for cool pad c106-9
---------- Post added at 05:42 AM ---------- Previous post was at 05:39 AM ----------
Can I install 7.0 ROM on my Cool pad cool changer 1c
difr said:
Hello xda ppl!
may be it will be useful for you.
many time was spent trying to do something good with this cpu,
to make it not so hot but fast and efficient.
so, here cooling is priority.
1. global configs
memory, cpu, gpu, thermal, doze ...
for android 6-7-8
files "thermal-engine.conf", "init.qcom.post_boot.sh"
paths detecting via existing thermal config
existing files backup ("~" suffix)
installation output, at the end there should be listing of 2 new and 2 backuped files
to revert just rename backuped files (root/twrp file manager)
2. profiles switch from status bar
its simplification of this one https://forum.xda-developers.com/android/apps-games/app-spectrum-kernel-manager-users-t3601542
for android 6-7-8 (but only if your OS has support of initialization from "/system/etc/init" (its standard))
files "/system/app/Spectrum/Spectrum.apk", "/system/etc/init/init.spectrum.rc", "/system/etc/init/init.spectrum.sh"
installation output, at the end there should be listing of 3 new files
to revert just install "SimpleSpectrum-uninstall.zip"
global configs + performance profile should be good for games.
and cool. like COOL1 should be
XDA:DevDB Information
cpu_tuning-difrED, Tool/Utility for the Coolpad Cool1
Contributors
difr
Version Information
Status: Beta
Created 2018-08-29
Last Updated 2018-08-29
Click to expand...
Click to collapse
Thanks man, this works great. Why do u want us to disable standard battery options?? Is that bound to create problems or conflict?
Thanks again
Related
This overlay APK it's "born" because of the necessity to overcome missing overlays (thanks Huawei, love ya xoxo) under /vendor/overlay .
What it does exactly?
Nothing more than adding AOSP overlay matching our device capabilities and also, inherits Prague power profile.
Do I need it?
Well, better having than don't.
This will conisderably enhance your experience on every GSI ROM giving better functionality overall.
Why you did that?
Because I'm sick of inheriting stuff that belongs to /vendor, in system.
Project Treble it's all about separating vendor implementation from system.
So why we should keep adding OEM stuff in there, if it doesn't belong no more in /system?
I have XYZ device with ZYX firmware can I use it?
As long as you're on a PRA-*** device (with a non-EMUI firmware), you're good to go.
Otherwise DO NOT USE IT FOR THE LOVE OF MANKIND.
I don't have PRA, but I want it on my Huawei device !
Well, that's fine, join the Telegram group @GSI_HI6250, so that you could help me with stock files grabbing to make an overlay for your device.
Overlay configs (aka "what does dis do, ser tell pl0x"):
Allows all rotations;
Configs autobrightness levels;
Configs autobrightness Lcd values;
Configs BLE;
Sets Doze Component;
Sets Doze After screen off;
Configs autopowermodes (doze related);
Configs power management on:
screen off due to proximity sensor interaction;
decouple on suspend state;
Configs brightness doze value;
Configs Intrusive led;
Configs dual band wifi support (where available);
Configs hotswap (where available);
Configs Color Transform on HWC;
Configs VoLTE available (even tho it needs support on GSI side);
Configs WFC over IMS;
Configs wifi background scanning support.
Installation Instructions
Download the overlay from the Downloads session.
With root, push the overlay to /vendor/overlay. Create the folder if it doesn't exist.
Run the following command in a rooted terminal or ADB shell:
Code:
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/dil3mm4-overlay-PRA.apk
XDA:DevDB Information
[Overlay] Dil3mm4's Overlays for Prague Series devices (all variants), Device Specific App for the Huawei P8lite/P8 Lite
Contributors
Dil3mm4
Version Information
Status: Stable
Created 2018-06-26
Last Updated 2018-06-26
Definitely will be useful. Thanks a lot, Dil3mm4!
Hi Dil3mm4,
Thanks for your work, but I'm not sure what this app does exactly, will it help me for example with substratum themes? Thanks
Hi @Dil3mm4 let me understand correctly:
- i'm under LineageOS 14.1 (Haky86 version). Am i concerned with your fixes ?
- i plan to go to LOS 15.1. Should i flash LOS 15.1 before, then install your fixes ?
- if i can go to LOS15.1 from Prject Treble, what device should i choose ? A or A/B ? I assume this is ARM64.
Thank you VM back in the ROM selection after 1 year, and i have things to understand
Graveen said:
Hi @Dil3mm4 let me understand correctly:
- i'm under LineageOS 14.1 (Haky86 version). Am i concerned with your fixes ?
- i plan to go to LOS 15.1. Should i flash LOS 15.1 before, then install your fixes ?
- if i can go to LOS15.1 from Prject Treble, what device should i choose ? A or A/B ? I assume this is ARM64.
Thank you VM back in the ROM selection after 1 year, and i have things to understand
Click to expand...
Click to collapse
Our device is arm64 A only (PRA-LX1 is my device)
If the APK is included in the rom u want to flash just run the command below, if not, after flashing just install the overlay according to the instructions. Have a nice day!
I will probably make a question that doesn't make sense since it's probably hardware related. But will this overlay add 5ghz support to our devices?
mannas said:
I will probably make a question that doesn't make sense since it's probably hardware related. But will this overlay add 5ghz support to our devices?
Click to expand...
Click to collapse
Nope
UPDATE
-P compatibility
-Improved brightness levels
DOWNLOAD
Hey Dilemma! I have an issue with all the Treble Roms. After listening to music for a while, the playback stops and I have to restart it, or when I plug a headphone in and then out, sound usually doesnt come out of the speaker. Will this overlay fix the issues I have with treble Roms? Thanks in advance
Please help with a little overlay
Dil3mm4 said:
This overlay APK it's "born" because of the necessity to overcome missing overlays (thanks Huawei, love ya xoxo) under /vendor/overlay .
I don't have PRA, but I want it on my Huawei device !
Well, that's fine, join the Telegram group @GSI_HI6250, so that you could help me with stock files grabbing to make an overlay for your device.
Click to expand...
Click to collapse
Hello Dil3mm4.
Sorry to send you PM, i see after sending that's not ok. I really want to solve Overlay issue for my Huawei Fig-LX1.
I try to join Telegram group indicated by you but could not find it. Maybe is not existing anymore. So - my last chance is you to respond here.
I just want you to make an overlay for my phone to work better with Phusson Treble 8.1. Just tell me what files do you need and i will do it.
Maybe you answer me.
Thanks!
Hi, by fixing BLE, you mean bluetooth low energy, like huawei band, fossil Q ?
thanks
Thanks! U did great!
Hi
I've tried to install this file but after I've enter the code, it says system is readable only.
I've tried with adb shell and terminal(booth of them rooted) and it didn't work
I've even tried to mount system as rewritable but it didn't work.
I'm on Aex 6.6 latest version(and I was on PRA-LA1 8.0.0.370 C185 before i flashed this custom rom)
What should I do to fix this error?
Traceur017 said:
Hi
I've tried to install this file but after I've enter the code, it says system is readable only.
I've tried with adb shell and terminal(booth of them rooted) and it didn't work
I've even tried to mount system as rewritable but it didn't work.
I'm on Aex 6.6 latest version(and I was on PRA-LA1 8.0.0.370 C185 before i flashed this custom rom)
What should I do to fix this error?
Click to expand...
Click to collapse
install terminal emulator , put the .APK (be sure to rename the last build taking the -P ) in the mencioned directory but first run the following command:
su
mount -o remount,rw /vendor
after this you can run the command for the apk.
It worked for me. or at least.. didnt gave an error... so.. lolol
I think I've installed it correctly but How can I see changes? Nothing added!
Hello, I have a PAR-AL00 device. Can you make an overlay for me.and Telegram group @GSI_HI6250, I can't find it.Thank you verymuch.
I don't understand, where is the overlay link?
Edit : Sorry, I didn't know it was in the download tab.
I can't find it where is it?
artus777 said:
I don't understand, where is the overlay link?
Edit : Sorry, I didn't know it was in the download tab.
Click to expand...
Click to collapse
Is this overlay necessary under Lineage 18.1 (PRAGUE device and EMUI 8.0.0.390)?
@Dil3mm4 Thread closed! Please advise the moderators team (best via the report function) to re-open the thread when ready to provide a download link for this former DevDB thread.
Regards
Oswald Boelcke
Senior Moderator
Modded Smoke kernel for xiaomi mipad
Based on Twu2`s work found on his github
Features:-
Overclocked cpu and gpu
Memcpy optimizations for faster ram access time.
Increased Quick charge 2.0 current for faster charge (Enable the usb fastcharge option from kernel aduitor mod)
Usb fastcharge interface from Nexus 9(thanks to @flar2)
3x framebuffer
nvidia smartdimmer
This kernel will only be compatible with Shield blob roms only and only for android oreo
Flashing instructions:-
Downloads Have been removed Because There`s no respect for my work here.
Source code:-
Check the r24.1 branch on my github and the link is at the end of the description
XDA:DevDB Information
[8.1.x] Smoke kernel Modded for Mipad (Mocha)[Shield blobs only] , Kernel for the Xiaomi Mi Pad
Contributors
yrahate7, Artemka2008, twu2
Source Code: https://github.com/Yrahate7/SmokeR24.2-kernel
Kernel Special Features:
Quick charge 2.0 ,Overclocked cpu,gpu
Version Information
Status: Testing
Created 2018-08-28
Last Updated 2018-08-28
Changelog:-
v1 Overclock,memcpy optimizations,mods for quick charge
v2 Added nvidia smart dimmer and enabled 3x framebuffer for better rendering
increased current draw for both quick charge 2 chargers and normal ones
Reserved 2.0
can you make it for 7.1.x nougat shield rom please?
It breaks the hardware button on lineage os 15.1 shield oreo rom
Home and recents button not working,back button works fine
but software button (navbar no problem)
hope you can also work on nougat version of this
BTW thanks for the custom kernel
I dont understand. Where can i download it?
2D-Kun said:
I dont understand. Where can i download it?
Click to expand...
Click to collapse
open this thread on your browser,you'll see download tab.
on xda app it doesn't show up
I downloaded the zip file and tried to flash via twrp. However got the error invalid zip file. Any idea??
I am in resurrection remix 8.1 shirld blobs rom.
aggarwal959 said:
I downloaded the zip file and tried to flash via twrp. However got the error invalid zip file. Any idea??
I am in resurrection remix 8.1 shirld blobs rom.
Click to expand...
Click to collapse
Download the file again,check the md5sum,
Update to the latest recovery.if it still doesn't work ,pm me .
jeremeel2015 said:
hope you can also work on nougat version of this
BTW thanks for the custom kernel
Click to expand...
Click to collapse
Sorry , Can`t do so.
yrahate7 said:
Added nvidia smart dimmer
Click to expand...
Click to collapse
We don't have smartdimmer
Same Here
filandry said:
It breaks the hardware button on lineage os 15.1 shield oreo rom
Home and recents button not working,back button works fine
but software button (navbar no problem)
Click to expand...
Click to collapse
I'm using resurrection remix oreo rom and the home button totally stopped working.
hope they come back with a better update
Artemka2008 said:
We don't have smartdimmer
Click to expand...
Click to collapse
Its a kernel based feature, Yes we do have it. Check out my git.
Maybe we might be missing some Application to support it, but my kernel adds support for it.
Took the commit from nexus 7 (2012).
P.s. Check the r24.1 branch on my Git.
and Salute to you sir, for supporting this device till now, making it better than it previously was on miui.
Just hoping you can add back camera support for this amazing device
AkhileshBandi said:
I'm using resurrection remix oreo rom and the home button totally stopped working.
hope they come back with a better update
Click to expand...
Click to collapse
For the Hardware navigation keys, I`ll add a new post to fix them.
They stopped working for me too, but i can`t seem to remember how i fixed it.
Will add it asap.
yrahate7 said:
Its a kernel based feature, Yes we do have it. Check out my git.
Click to expand...
Click to collapse
lmfao. Google at first. Smartdimmer is a HARDWARE thing. We don't have this hardware function. Kernel just contains the driver for communicating with a smartdimmer. You can enable anything you want, but it will not work because of lack of the hw part.
Artemka2008 said:
lmfao. Google at first. Smartdimmer is a HARDWARE thing. We don't have this hardware function. Kernel just contains the driver for communicating with a smartdimmer. You can enable anything you want, but it will not work because of lack of the hw part.
Click to expand...
Click to collapse
Okay , I`m not sure about it.
Thanks for the Tip.
Sorry for the off topic question but can you please Recommend a particular Dolby atmos port?
And just one another question, Why wont the cameras work? I know there`s some issue with the HAL.
yrahate7 said:
can you please Recommend a particular Dolby atmos port?
Click to expand...
Click to collapse
I don't use any sound mod.
yrahate7 said:
Why wont the cameras work? I know there`s some issue with the HAL.
Click to expand...
Click to collapse
Cuz we need android HAL which will be compatible with nvidia's HAL and our cameras inside kernel. Or we need to write V4L2 kernel drivers for our cameras.
about this one
git
1) I won't revert it cuz I use more then 2Gb
2) Look at nvidia's default config at first
You try to sound smart, but in fact you know nothing about our tablet.
Reserve. I hope the author put back download link. The kernel feuture is promising. Hope we can test it. Thanks.
Up, hope to see this kernel again
Code:
*** Disclamer
Please behave responsibly and avoid thermonuclear war. I am
not responsible for any bricked devices, etc.
Introduction
This is Zest Kernel. It's an optimized kernel for our device which includes a few nifty features. Built, on every security update, you'll have the best of the best. Features will be listed below and shared, to the most of my ability, across all my supported devices. This isn't just my kernel it's yours too - request any features you like and I'll try to add them in. However, I'm also busy with studies so please don't ask for dumb stuff.
Click to expand...
Click to collapse
Images
Possibly the fastest [clean] ROM for our device, benchmarks coming soon .
Click to expand...
Click to collapse
Features
Google's exclusive features for Pixel devices (except Music Ticker and Call Screening)
Lawnchair launcher
Spoofed stock device to pass SN
Widevine L3
Faster encryption device-wide
Daydream VR
Fast, optimised Zest Kernel
EAS
Markup screenshot editing
Google Sound Picker
Google Wallpapers
Digital Wellbeing
Optimised GPU rendering for Pie
Custom Clang and GCC toolchains for building - optimised LLVM with PGO, and GCC 9.1
OpenGApps pico included
GCam HDR+ support
Click to expand...
Click to collapse
Installation instructions
* Go download https://developer.sony.com/file/download/software-binaries-for-aosp-pie-android-9-0-kernel-4-9-yoshino.
* Unzip the download to get an .img file.
* Install fastboot (drivers for this can be gotten from Google directly), drivers for flashmode for Windows can be gotten from newflasher.
* Enter your command prompt or terminal whatever and fastboot flash oem THEFILEYOUEXTRACTED.img.
* Find a decent TWRP and flash it.
* Download the ROM for your device. They are all in this folder https://jenkins.cosmic-os.org/job/zfsodp-core/ws/lastbuild so click the one for your codename (eg. G8141 is single sim maple and G8142 is dual sim maple).
* Flash it in TWRP and wipe internal storage and format data (the option that has red text and makes you type yes).
* Enjoy!
Click to expand...
Click to collapse
Download
Latest is on my Jenkins job.
Click to expand...
Click to collapse
FAQ
PM me in XDA's Sony group.
Click to expand...
Click to collapse
Special Thanks To
Code:
* @kholk for his kernel advise
* @Sultanxda for his kernel advise
* @deletescape for Lawnchair
XDA:DevDB Information
Zest-flavoured SODP, ROM for the Sony Xperia XZ Premium
Contributors
LazerL0rd, The entire SODP team
Source Code: https://github.com/ZfSODP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Sony OSS OEM binaries
Based On: SODP
Version Information
Status: Beta
Beta Release Date: 2019-07-06
Created 2019-07-06
Last Updated 2019-08-10
Reserved
Reserved
nice, try tonight:good:
----------------------------------------------------------------------------------------------
HAVE BEEN DELETED, I don't know what happen, his own website and his kernel is also deleted.
I have the same as the #5, but a bit different, there were 4 identical page on the screen, such like 4 1080p in a 4k screen, I think the 120HZ 1080p display driver is the reason.
I was on latest stock when flashing (following every step), when it boots and show the sony logo, it gets distorted (characters in the top and middle) and then reboots. I've reflashed stock, wiped everything including system, tried older twrp, and even flashed the G8142 image on my G8141, but i keep getting the distorted sony logo followed by a reboot. Is there anything else i have to do?
I had this issue before with AOSP but i never figured out how to fix it.
G8141, unlocked bootloader, .80 stock, twrp 3.3.1.0 and 3.2.3.0
del
Can I flash the kernel through twrp, then flash the zip?
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Psychoticism said:
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Click to expand...
Click to collapse
Give it a week or so mate, lazerl0rd is studying/having exams for a while.
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Any screenshot of the performance?
It was stopped at the android logo, it ran all night and did not enter the system. please help me!
still on logo android !/
Sjll said:
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Click to expand...
Click to collapse
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Laplacetor said:
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Click to expand...
Click to collapse
EAS is not stable on SODP. GPU of MSM8998 is hard to afford 120Hz.
Smooth, fast(20sec boot time including 5 second bootloader unlocked nag!) and clean rom thanks a lot! Sadly not going to be my daily driver because lack of features, and my device overheats sadly because of 120hz. Also it takes me 3 reboots to get into recovery any idea why?
Advices:
Get rid of pre installed google, allow users to install separately.
JamesDSP should be stabilized, I just get FC all time can't get it to work. (Would be better to just remove as well and allow user to install separately)
Default DPI is too low, should be 420 for ease of use.
Sony camera should be added, as in Sjll's LineageOS. ***
Ancient app logos (kitkat calendar calculator etc) should be updated.
Device-wide dark mode which includes Phone, Calendar, Settings and Files should be made. **
Phone application should be de-google-ified, Spam filter inside just feeds Google with private call data. ***
Option to switch resolution and frame rate on the go.
Heyo, wondering if you can add a quick and dirty CIFS kernel module. There are some universal versions floating around online.
Signing them is above my skill level. I don't know if the signing process has to be implemented on a device by device level. If that is an impediment, maybe consider removing the requirement for kernel modules to be signed in the first place? I don't know, I'm no expert.
Just a PSA. Someone got rclone mounts working via Magisk. Can be found in repo. Sadly, no support for cifs or nfs. But webDav works. The largest downside is that the mounts can't be mounted directly onto sdcard. Something the cifs kernel module did no problem. With rclone you'll need an app with root browsing capability. Or at least full access to /storage.
UPDATE: The rclone Magisk version has been updated to support direct sdcard mounts! Yay! So, there isn't really a need for a cifs module.
However, I'm certain the performance will be better with a cifs module. So, it's not necessary, but could be a cool benefit if added.
Thanks for all the work! It doesn't go unnoticed.
i hope you add other version special 90hz because 120hz make my device overheats and thank you
Moarten said:
I was on latest stock when flashing (following every step), when it boots and show the sony logo, it gets distorted (characters in the top and middle) and then reboots. I've reflashed stock, wiped everything including system, tried older twrp, and even flashed the G8142 image on my G8141, but i keep getting the distorted sony logo followed by a reboot. Is there anything else i have to do?
I had this issue before with AOSP but i never figured out how to fix it.
G8141, unlocked bootloader, .80 stock, twrp 3.3.1.0 and 3.2.3.0
Click to expand...
Click to collapse
Try again, a few of the previous builds were bootlooping, I'll try update instructions too.
Laplacetor said:
nice, try tonight:good:
----------------------------------------------------------------------------------------------
HAVE BEEN DELETED, I don't know what happen, his own website and his kernel is also deleted.
I have the same as the #5, but a bit different, there were 4 identical page on the screen, such like 4 1080p in a 4k screen, I think the 120HZ 1080p display driver is the reason.
Click to expand...
Click to collapse
Psychoticism said:
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Click to expand...
Click to collapse
Try again, a few of the previous builds were bootlooping, I'll try update instructions too. ROM isn't on my website and never was .
wolfmanstr said:
Can I flash the kernel through twrp, then flash the zip?
Click to expand...
Click to collapse
Don't use my stock kernel with this.
Sjll said:
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Click to expand...
Click to collapse
It performs better, battery is decent now (after a load of changes). We now (as of today) have a Power HAL (libperfmgr) which supports DT2W on supported devices too. I may or may not update it to version 1.3.
SilverGamer_YT said:
Any screenshot of the performance?
Click to expand...
Click to collapse
No, it's EAS and you could test it out.
tronganhha29 said:
It was stopped at the android logo, it ran all night and did not enter the system. please help me!
Click to expand...
Click to collapse
Yeah, I fixed that a while ago - try again please.
CRNO said:
still on logo android !/
Click to expand...
Click to collapse
Yeah, I fixed that a while ago - try again please.
Laplacetor said:
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get lag" and like our phone can handle it on UI, at least. The worst case is battery but IIRC it wasn't too different from 60Hz. Anyways it's 90Hz now.
Sjll said:
EAS is not stable on SODP. GPU of MSM8998 is hard to afford 120Hz.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get lag" and like our phone can handle it on UI, at least. The worst case is battery but IIRC it wasn't too different from 60Hz. Anyways it's 90Hz now. EAS seems stable, here. The bugs we have aren't really EAS related.
undefine said:
Smooth, fast(20sec boot time including 5 second bootloader unlocked nag!) and clean rom thanks a lot! Sadly not going to be my daily driver because lack of features, and my device overheats sadly because of 120hz. Also it takes me 3 reboots to get into recovery any idea why?
Advices:
Get rid of pre installed google, allow users to install separately.
JamesDSP should be stabilized, I just get FC all time can't get it to work. (Would be better to just remove as well and allow user to install separately)
Default DPI is too low, should be 420 for ease of use.
Sony camera should be added, as in Sjll's LineageOS. ***
Ancient app logos (kitkat calendar calculator etc) should be updated.
Device-wide dark mode which includes Phone, Calendar, Settings and Files should be made. **
Phone application should be de-google-ified, Spam filter inside just feeds Google with private call data. ***
Option to switch resolution and frame rate on the go.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get overheat" and like our phone can handle it on UI, at least. I changed up the thermal driver so it should be good now. Btw those thermal modules in Magisk won't change a thing as I use sultan's thermal framework now - not RQBalance stuff. DPI has an option on setup under "vision", choose what you like. I added GCam instead, it's gonna be better quality than Sony's crappy cam app. Ancient app logos aren't gonna be updated, these are ASOP packages - instead I'm replacing them with Google packages. Also I made everything Squircle shaped too. Device-wide dark mode will be coming soon, needs some kanging [with original authorship] from Q. Phone application should be de-google-ified -> you can turn off the spam filter and install any Dialer you want. I'm not dealing with darkening AOSP's package so that's why I'm using Googles. Google can get your data if Play Services is installed anyways. Option to switch resolution and frame rate on the go -> idk why SODP removed that.
Astoras said:
Heyo, wondering if you can add a quick and dirty CIFS kernel module. There are some universal versions floating around online.
Signing them is above my skill level. I don't know if the signing process has to be implemented on a device by device level. If that is an impediment, maybe consider removing the requirement for kernel modules to be signed in the first place? I don't know, I'm no expert.
Just a PSA. Someone got rclone mounts working via Magisk. Can be found in repo. Sadly, no support for cifs or nfs. But webDav works. The largest downside is that the mounts can't be mounted directly onto sdcard. Something the cifs kernel module did no problem. With rclone you'll need an app with root browsing capability. Or at least full access to /storage.
UPDATE: The rclone Magisk version has been updated to support direct sdcard mounts! Yay! So, there isn't really a need for a cifs module.
However, I'm certain the performance will be better with a cifs module. So, it's not necessary, but could be a cool benefit if added.
Thanks for all the work! It doesn't go unnoticed.
Click to expand...
Click to collapse
For Android kernels, you can't just chuck a module in. But I'll add it to the kernel config for ya.
CRNO said:
i hope you add other version special 90hz because 120hz make my device overheats and thank you
Click to expand...
Click to collapse
Already done. And - "I don't get all this 120Hz issue, it's not as simple as "set 120Hz get overheat" and like our phone can handle it on UI, at least."
This rom was build based on SODP built on work of @MartinX3
and built for fun
FLASH INSTRUCTIONS:
1. fastboot -w
2. fastboot flash oem sodpv8.img
3. fastboot flash recovery twrp.img
4. fastboot boot twrp.img
5. Install Lineage zip
6. Install Gapps zip (Optional)
7. Install Magisk (Optional)
8. Swipe to flash....
9. REBOOT!
DOWNLOAD LINKS:
1. SINGLE SIM : https://www.androidfilehost.com/?fid=8889791610682872901
2. DUAL SIM : https://www.androidfilehost.com/?fid=8889791610682872893
FEATURES:
1. Camera2api Level 3 enabled
2.RAW photo support
3.4.14 Kernel
BUGS:
* Screen wont wake
* GCAM doesnt work
* Weird sim detection
*Photos app freezes whole system
*YOU TELL ME
Telegram Link:
https://t.me/LineageOS_Sony
ROM OS Version : Android 10
ROM Kernel Version : Linux 4.x
Based on : SODP
Contributors: MartinX3 , kgvarunkanth
Special thanks for @empulse92 for providing his server to build
Special thanks for @MartinX3 for his work on Maple
First, yeahhaaa!
Second here[emoji4][emoji4]
Envoyé de mon havoc_maple en utilisant Tapatalk
MartinX3 said:
First, yeahhaaa!
Click to expand...
Click to collapse
Lol cool!!!
Hi
It seems after 621, https://github.com/sonyxperiadev/bug_tracker/issues/621
SODP has fixed the issue
* Screen wont wake
* GCAM doesnt work
*Photos app freezes whole system
But I would say the Camera photo quality is very crap even if I use ported HDR+ RAW GCAM.
Everything is too bright though.
At least now you can use it on daily instead of "Screen wont wake".
Can you make a confirm and do updates?
Or actually I has build AOSP, but not sure if I can merge into Lineage OS.
EtU7FnQr3ER7 said:
Hi
It seems after 621, https://github.com/sonyxperiadev/bug_tracker/issues/621
SODP has fixed the issue
* Screen wont wake
* GCAM doesnt work
*Photos app freezes whole system
But I would say the Camera photo quality is very crap even if I use ported HDR+ RAW GCAM.
Everything is too bright though.
At least now you can use it on daily instead of "Screen wont wake".
Can you make a confirm and do updates?
Or actually I has build AOSP, but not sure if I can merge into Lineage OS.
Click to expand...
Click to collapse
Hey there.... Ryt now I'm bit busy with studies and stuff.... So it would take some time to get latest lineage based on sodp working tho
Martin is the guy who ported lineage sodp for maple credits for him
kgvarunkanth said:
Hey there.... Ryt now I'm bit busy with studies and stuff.... So it would take some time to get latest lineage based on sodp working tho
Martin is the guy who ported lineage sodp for maple credits for him
Click to expand...
Click to collapse
I see... And, sir... could you point a way out for me to learn skills can get the things possible?
I often see people doing kernel mods, port features, create ROMs, writing magisk modules or magisk itself,
I hope I can be powerful, doing similar things, with people together, but when I step in Android bottom world, from a normal kind of people, became a programmer, I went a far way, but still far from things. And lose the way, I don't know what's the next step to go. Of course there are lots of business app dev tutorial out there, and I learn from them, in the end, one key point wasn't found in my heart... I just become a programmer, but not a hacker.
People always get great things from hackers.
For example, now we know Xperia has a unique system file structure, and cause custom recovery image are hard to make compare to other phones. Result in latest TWRP can't run properly. You have to use the old version and lack some things only available in latest.
Another thing is the SODP kernel doesn't have a color calibration feature. And a Lineage OS based on SODP kernel instead of close source kernel. E.G. Google Camer HDR plus & Night sight & SuperResZoom were require RAW capture to work which only availalbe in SODP.
I'm not wanting to just sit there and prayer for things automatically done. I think I need some specially guide on these topics.
EtU7FnQr3ER7 said:
I see... And, sir... could you point a way out for me to learn skills can get the things possible?
I often see people doing kernel mods, port features, create ROMs, writing magisk modules or magisk itself,
I hope I can be powerful, doing similar things, with people together, but when I step in Android bottom world, from a normal kind of people, became a programmer, I went a far way, but still far from things. And lose the way, I don't know what's the next step to go. Of course there are lots of business app dev tutorial out there, and I learn from them, in the end, one key point wasn't found in my heart... I just become a programmer, but not a hacker.
People always get great things from hackers.
For example, now we know Xperia has a unique system file structure, and cause custom recovery image are hard to make compare to other phones. Result in latest TWRP can't run properly. You have to use the old version and lack some things only available in latest.
Another thing is the SODP kernel doesn't have a color calibration feature. And a Lineage OS based on SODP kernel instead of close source kernel. E.G. Google Camer HDR plus & Night sight & SuperResZoom were require RAW capture to work which only availalbe in SODP.
I'm not wanting to just sit there and prayer for things automatically done. I think I need some specially guide on these topics.
Click to expand...
Click to collapse
Here is one of build instructions for sodp aosp...
Build AOSP Android 10.0 - Open Devices - Sony Developer World
developer.sony.com
kgvarunkanth said:
This rom was build based on SODP built on work of @MartinX3
and built for fun
FLASH INSTRUCTIONS:
1. fastboot -w
2. fastboot flash oem sodpv8.img
3. fastboot flash recovery twrp.img
4. fastboot boot twrp.img
5. Install Lineage zip
6. Install Gapps zip (Optional)
7. Install Magisk (Optional)
8. Swipe to flash....
9. REBOOT!
DOWNLOAD LINKS:
1. SINGLE SIM : https://www.androidfilehost.com/?fid=8889791610682872901
2. DUAL SIM : https://www.androidfilehost.com/?fid=8889791610682872893
FEATURES:
1. Camera2api Level 3 enabled
2.RAW photo support
3.4.14 Kernel
BUGS:
* Screen wont wake
* GCAM doesnt work
* Weird sim detection
*Photos app freezes whole system
*YOU TELL ME
Telegram Link:
https://t.me/LineageOS_Sony
ROM OS Version : Android 10
ROM Kernel Version : Linux 4.x
Based on : SODP
Contributors: MartinX3 , kgvarunkanth
Special thanks for @empulse92 for providing his server to build
Special thanks for @MartinX3 for his work on Maple
Click to expand...
Click to collapse
1) Does 4k mode work on YouTube?
2) I assume this kernel has thermal throttling disabled, is there any way to enable it?
3) I don't see any links for gapps, would you send it here, please?
Xda user11 said:
1) Does 4k mode work on YouTube?
2) I assume this kernel has thermal throttling disabled, is there any way to enable it?
3) I don't see any links for gapps, would you send it here, please?
Click to expand...
Click to collapse
1. No 4K mode , cause enabling 4K eats battery like hell
2. Thermal throttling is enabled ofcourse...but not strict
3.You can install any gapps it's should work normally as usual (unless u download a non supported android version)
kgvarunkanth said:
1. No 4K mode , cause enabling 4K eats battery like hell
2. Thermal throttling is enabled ofcourse...but not strict
3.You can install any gapps it's should work normally as usual (unless u download a non supported android version)
Click to expand...
Click to collapse
Does it throttle less then on stock kernel and is there any way to install stock kernel? Because I want my phone to throttle when executing less demanding tasks. When I play games, I can manually disable it...
kgvarunkanth said:
1. No 4K mode , cause enabling 4K eats battery like hell
2. Thermal throttling is enabled ofcourse...but not strict
3.You can install any gapps it's should work normally as usual (unless u download a non supported android version)
Click to expand...
Click to collapse
Could you recommend me any rom, which is based on stock, has 4k resolution and internal audio recording?
Xda user11 said:
Does it throttle less then on stock kernel and is there any way to install stock kernel? Because I want my phone to throttle when executing less demanding tasks. When I play games, I can manually disable it...
Click to expand...
Click to collapse
Yes less throttled...
Nope no way to install stock kernel unless u boot a stock based rom...
This is sodp...bit different from stock
Xda user11 said:
Could you recommend me any rom, which is based on stock, has 4k resolution and internal audio recording?
Click to expand...
Click to collapse
Look ten roms built by shujath
They have internal audio support
But no 4K cause they have many disadvantages....
kgvarunkanth said:
Look ten roms built by shujath
They have internal audio support
But no 4K cause they have many disadvantages....
Click to expand...
Click to collapse
That is sad. If Sony had an inbuilt recorder like all other flagships, I'd just stay with temp root on Android 8. It had everything I needed except internal audio recording...
kgvarunkanth said:
Look ten roms built by shujath
They have internal audio support
But no 4K cause they have many disadvantages....
Click to expand...
Click to collapse
Do u know how to change the thermal engine, so that my CPU starts throttling at 53 ℃ ? I've tried using a program I had on Android 8, but on Android 10 it only limits the CPU frequency at 2.2 Ghz and it still doesn't throttle after that
Xda user11 said:
That is sad. If Sony had an inbuilt recorder like all other flagships, I'd just stay with temp root on Android 8. It had everything I needed except internal audio recording...
Click to expand...
Click to collapse
Alryt your preference
HELLo everyone...
After several weeks, months and before Android 12 released, i decided to share this ROM to this A51 community. Hopefully you guys enjoy it and don't offend me if the ROM is bad, so....let's get it ON.
Things to do before flashing:
1. Make sure you're on binary 5 (this ROM tested and using binary 5 vendor, so to avoid any broken or whatever error flash your device with latest firmware).
2. Backup your IMEI (highly recommended).
Flashing:
1. Clean flash is recommended. Flash kernel, flash J4F vendor and system.img, flash multy disabler (if necessary) then full wipe and also you can perform "typing YES" format. Reboot to recovery again, then flash as usual you guys always do (Magisk etc.).
ROM Features from S20 and Note 20 line up:
1. Samsung Dex (not full features coz need fix at kernel level).
2. Flagship live blur
3. Flagship edge lighting style
4. AirCommand (S pen)
5. LiveDrawing
6. Multy screen resolutions (HD+ - FHD+ - WQHD+)
7. 1000++ system fonts
8. Flagship sound quality and effects
9. Camera features unlocked (pro video etc.)
10. All original A51 features
11. Common tweaks here and there and so many possibility to unlock another S20 features
Bugs:
Minor glitch in pro mode video, and not really remember and deep testing everything, but hopefully still acceptable (hopefully ) but yeah..nothing's perfect, if you found one let's discuss together in A51 telegram group: https://t.me/samsunga51
Hall of Fame:
@MrWaehere for his awesome CRB kitchen
@VDavid003 and his rom TreeUI for my inspiration and countless help
@Yillié and his OFox recovery and also countless help and advise and ideas
@BlassGO and his Dynamic Installer, patches, advise and countless contributions (thanks for making AirCommand even greater lol)
@manudinath and his projects.
@Winb33 for fonts mod
@topjohnwu for Magisk
@ianmacd for multy disabler and TWRP
Stock Kernel Source
PM me if i forgot to mention someone.
Advise and Tips:
- It's normal during first boot if lags occurs, give the ROM some times to settle, finish your setup, update your apps and you good to go..
- It's better to avoid update in Galaxy store related to system app, such as MDE Service Framework, Samsung Core Services etc. It might causing conflict due to mixed up firmware. But anyway it's up to you.
- Please do not complain regarding app missing (getting debloated) and related to debloat. Because it's very hard to acomodate every person's taste. Bloatware is very Objective and absurd for each person and I know it's supposed to be using Aroma installer or any script but i don't have time that much to do that.
Download link:
**when you click this link and downloading, that's mean you're agree to all the consequences and i'm not responsible to anything - do with your own risk**
LINK
Pero peeps. Sorry for not being able to test all the stuff properly xD.
Yillié said:
Pero peeps. Sorry for not being able to test all the stuff properly xD.
Click to expand...
Click to collapse
nah, you have doing so great/ thank you s much for everything.
Testing .
perro
Ole its already, nice
Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.
@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50
BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
Ia possible wirh This vendor run fingerprint perfectly in havoc
Badger50 said:
@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50
Click to expand...
Click to collapse
If run for You send details my friend
Someone knows how to pass CTSprofile in magisk with this rom?
gobblefunk said:
Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.
Click to expand...
Click to collapse
system and vendor.
BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
mhm...thanks for everything
jagpanzer said:
system and vendor.
Click to expand...
Click to collapse
Kernel 11 support this ROM?
Magisk 23.1
Download Magisk 706a4922 alpha apk
Download File Magisk 706a4922 alpha apk
apkadmin.com
Changelog magisk 23.1
DOWNLOAD VERSion ALPHA:
Magisk v23.1 (706a4922-alpha)
Changelog:
• Switch to zygisk to execute the deny list,
• Magiskhide has been completely removed
• Denylist Added
• Restart to take effect after changing the switch state of zygisk
• Major changes, some problems may occur, temporarily not pushed to the update channel
Others changes in APK:
[General] supports pure 64-bit devices
-[General] Support Android 12 emulator
-[Zygisk] code injection framework
-[General] Remove MagiskHide
-[General] Support simulator loading module
-[MagiskBoot] supports zImage format
-[MagiskBoot] Add zopfli encoder
-[MagiskInit] supports boot configuration
-[App] Repair installation function will now check whether the script under /data/adb/magisk/ is not updated
-[MagiskInit] supports some Meizu devices
-[MagiskSU] If supported by the kernel, use isolated devpts
-[MagiskSU] Fix pts configuration code, no additional sepolicy rules are now required
-[MagiskBoot] supports v4 boot image header format
-[MagiskInit] Support some OnePlus and Opal devices Oplus.fstab
-[App] The update module needs to be restarted, mark deletion is not allowed
-[App] Delete online warehouse
-[App] Add mount information to the saved log file
-[App] Adapt to Android 12 API level
-[App] Display running waiting pop-up window when hiding/resuming the application
-[Stub] Open source obfuscation function
-[Script] View and display the sepolicy rule folder of the module
-【App】Hide the screen overlay when you need to pop up the window. Android 12+
-[App] Delete the floating bottom bar and change it to a general bottom operation bar
-[General] Support compilation cache
-[General] Added rejection list function
-[App] Delete DoH
-[App] Delete SafetyNet
Can you please also make this rom for M30s ??
Because both have similar specs and same soc !
Bluetooth connect error
hacker812c said:
Kernel 11 support this ROM?
Click to expand...
Click to collapse
during testing i only test with BF2. you can try
Arya1999 said:
Can you please also make this rom for M30s ??
Because both have similar specs and same soc !
Click to expand...
Click to collapse
sorry, no time.
Inomjon6940🇺🇿 said:
Bluetooth connect error
Click to expand...
Click to collapse
last time i try with old BT 4.0 earphone was fine and also BT call. will test again, on last build i've made changes and could be broke something