Related
Hello,
As I was tired of looking around on forums Polish, Russian, Xda, phonandroid etc ... I decided to send you the recipe to install Xposed Xprivacy and the Huawei ascend Mate 7 (TL 10)
My phone was previously under 4.4.2 and 3.0 EMUI via the original rom HUWAEI (output from the manufacturer box)
So I do the manual udpate for version 5.1.1 and EMUI 3.1 (http://consumer.huawei.com/my/support/downloads/index.htm?keyword=mt7)
So all my applications already operating under 5.1.1.
Now here's the recipe "magic" for TL10 (and I imagine TL9)
0- SETTING OF MY ORGINAL PHONE
I have such TL10 (Dual SIM) with the original rom Huwaei 5.1.1 and 3.1 EMUI
1- UNLOCK AND ROOT YOUR PHONE + BOOTLOADER OPEN=
Search on this forum to do this. (maybe here ? http://forum.xda-developers.com/mate-7/general/huawei-ascent-mate-7-unlock-recovery-t2941525)
But your phone must be ROOT, and TWRP ok and your bootloader open
2 BACKUP YOUR ROM OF ORIGIN
Make a backup of your ROM via TWRP in case.
3- OBLIGATION TO USE A ROM "CUSTOM"
Download the latest version of the ROM KangVIP 2A dated 12.29.2015 (No panic in the Rom is already lollipop 5.1.1 / 3.1.1 EMUI)
Link: http://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
Just download the zip Rom that contains a direct link: https://mega.nz/#!3dgjRLrT!DBAcxSWgzb53LVpkFfYrHoEqt-NgV37YK_pY-yxM6Lo
We must extract the zip which contains two other zip (Rom + Patch)
Then download the direct link Gapps http://forum.xda-developers.com/android/apps-games/hdpi-google-apps-5-1-t3066172
4- copy everything on your phone then: flash the rom (Use Recovery TWRP), flash the patch then flash the Gapps. (The recovery mode will be accessible only through the reboot of such, but relax, this is not a problem)
5- restart the phone and EMUI icon will turn for many 5/10 minutes (must wait). (FYI I have not made a Factory Reset for my Roma origin was already under EMUI 5.1.1 and 3.1, so all my apps work perfectly)
Personally 2A this version works perfectly! Zero bugs, no delays and a few bonus and more.
6 After the restart as I had 2/3 Chinese apps. Since I do not like spies applications I used KingRoot already preinstalled to remove some invasive Chinese applications. Warning Kingroot SuperSu and will replace super user application office (as included in the ROM). I advise you to leave this original program that does his job as well as SuperSu.
7- CHANGE THE SETTING OF YOUR PHONE TO BE COMPATIBLE Xposed
Next, open the system via a explorer like ROOTEXPLORER and search in the SYSTEM folder and look for the file build.prop
8. Open this file using a text editor
9. Replace the line "ro.config.themecolor = true" to "ro.config.themecolor = 0"
Replace the line "ro.config.hwtheme = 1" to " ro.config.hwtheme = 0"
!!! Save your work !!! (ps the quotes are not set, it's just to give you the rows. This will generate you a backup in format.BAK, I have deleted this file .bak, for me to do anything)
10- via King Root Use the built UNINSTALL TOOL functionality (previously used to remove 2/3 Chinese apps that are useless) to DELETE the system application "THEMES"
11- INSTALL Xposed
Download the 2 files in your phone "XposedInstaller_3.0_alpha4.apk" and "xposed-v79-sdk22-arm.zip"
http://forum.xda-developers.com/showthread.php?t=3034811
12 - installing "XposedInstaller_3.0_alpha4.apk" direct link http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Download "xposed-v79-sdk22-arm.zip" in such direct link http://forum.xda-developers.com/attachment.php?attachmentid=3580244&d=1450386592
13. Reboot into recovery mode (available after having just click Restart in the phone) and then install "xposed-v79-sdk22-arm.zip"
14. Restart such EMUI The icon will turn and it will wait (5-10 minute wait) and ... Xposed works perfectly, and your home bar is present
15- XPRIVACY INSTALL (OPTIONAL)
then install XPRIVACY (protection of user data), simply download the latest stable version 2.6.1 via Xposed MODULE part (no bootloop !! )
16- PHONE WITH XPOSED OK
Your phone, is ROOT, Xposed installed, Xprivacy too. I use the launcher Nova Laucher and this is happiness.
ENJOY! and good year !
PS: Since everyone is blind, I also do: You make her manipulations your own risk in any case I will not be responsible if your phone plant.
PS2: I would not answer to comments, my explanations being like "Xposed FOR DUMMIES "
PS3: I do not expect thanks, if you want to "help", just your turn to contribute one day on this site
PS4: Sorry for my english, I'm a french Guy. You can see my tuto in french here: http://www.phonandroid.com/forum/tu...uwaei-mate-7-tl10-lollipop-5-1-1-t140786.html
It's not necessary to make that changes in build prop. Just check the "disable resource hooks" in Xposed settings
Sent from my Mate
what are the odds of this working with stock emui rom?
Hi, I have the Huawei p8 lite with android 5 and emui 3.1. it is the L21, then Kirin processor.
I tried to change the build.prop and uninstall the theme app as you said then I installed the installer and flash with twrp the framework (xposed-v79-sdk21-arm64), but it goes in bootloop. it seems stuck for 2-4 minutes then boot again.
Do you have some idea? Thanks
surfercoast said:
Hi, I have the Huawei p8 lite with android 5 and emui 3.1. it is the L21, then Kirin processor.
I tried to change the build.prop and uninstall the theme app as you said then I installed the installer and flash with twrp the framework (xposed-v79-sdk21-arm64), but it goes in bootloop. it seems stuck for 2-4 minutes then boot again.
Do you have some idea? Thanks
Click to expand...
Click to collapse
I think that with android 5 you should have flashed sdk22 version (and maybe arm32, I am not sure)
---------- Post added at 03:35 PM ---------- Previous post was at 03:35 PM ----------
Any experience with new v80 version?
Not work on stock b331 lost navbar and status bar
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
In the build.prop file there is written sdk21. The kirin620 is surely an arm64 processor. Rovo89 on github says that is a problem related at the ForceNotDex condition on boot.look issue 72 on github
But are required to remove app THEMES?
xposed for mt7-l09 for marshmallow 6.0
anyone can help me plz on installing xposed for mt7-l09 for marshmallow 6.0 B513 ?
Do this at your peril, it will brick your phone.
For b571? Its possible?
Enviado do meu JAZZ através de Tapatalk
IMPORTANT INFORMATIONS:
BULE is the most famous CM ROM developer for Redmi note 2 in China. His ROMs are amazing smooth and stable.
I do not own this ROM, I found it on a Chinese development community.
I just want to share it to Redmi note 2 users from all around the world.
Some features:
Automatic call recording (Open call settings).
Process locks, globally effective (lock and unlock operations in recent apps list).
The status bar displays network speed.
The status bar of virtual power button (click the lock screen, press the menu pop-up power supply).
New and fresh icon style.
Adjust the settings for the two-column interface.
The new blacklist and permission settings.
Optimized dual card default account selection.
Recently task list optimization, easier to operate a clean-up.
Optimize software installation, you can set the start and wake permission from the installation.
Add list animation.
Adjust settings interface color.
Adjust task management interface.
Increased three-finger screen capture function (thank sudamod).
USING TIPS:
1. Change the weather location: add desktop weather widgets, and custom location, click to confirm.
2. The developer mode (to enable rooting) is hidden by default, you need to open Settings > About phone, click on the version number for 5 times.
3. Double tap on status bar to turn screen off.
FLASHING GUIDE:
1. Install custom recovery (TWRP recommended)
2. Copy custom ROM zip file to sd-card (internal/external)
3. Boot into recovery mode
4. Now select wipe
5. Advance wipe & select system, data, dalvik cache, cache
6. Now, swipe to wipe
7. Select install & select custom rom zip
8. Install success
9. Now install gapps: Please choose ARM64 platform http://opengapps.org/?api=5.1&variant=pico
10. After installing gapps, wipe cache & dalvik cache
11. Reboot
12. That's all folk's, enjoy custom ROM
DOWNLOADS:
Lastest Release 03.29:
https://drive.google.com/file/d/0B9dmV78-XYO6RExpQnlkZ0d3X2s/view
Xposed:
https://drive.google.com/drive/u/0/folders/0ByjakaPKfYnPSUptY2ZuazJqNFU
Install APK file.
Flash ZIP file via Recovery
Open Xposed.
Slow-motion camera app :
https://drive.google.com/file/d/0B2FG4wbnEIzvLVM3SXFjQnRPQ2c/view
Download and install it like a normal apk.
Credits:
BULE and his partners.
http://weibo.com/lbule
Version Information:
Status: Stable
Android version: 5.1.1
Current Stable Version: 20160329
Stable Release Date: 2016-03-29
Hi ) the rom multilingual ?
musstage said:
Hi ) the rom multilingual ?
Click to expand...
Click to collapse
It seems like English and Chinese only bro
Screenshots? Battery SOT?
I thought YIOS is based on CM, not AOSP?
VIDEO REVIEW HD:
Forgive me if I'm wrong, but aren't all other custom roms here based on Bule's roms anyway?
433Mhz said:
Forgive me if I'm wrong, but aren't all other custom roms here based on Bule's roms anyway?
Click to expand...
Click to collapse
Yes. They use Bule's ROM source.
Sent from my Redmi Note 2 using XDA-Developers mobile app
This is CM, is moded by Movil Dual Sim Team, is has spanish and some modifications. Not AOSP.
How do I enable root on this rom?
EDIT: Nevermind, found it, thanks!
AnchorChin said:
How do I enable root on this rom?
EDIT: Nevermind, found it, thanks!
Click to expand...
Click to collapse
I wrote it in Using tips. :fingers-crossed:
New version
New version by Bule:
http://pan.baidu.com/s/1bp0oFN5
pass: fypg
homepage: http://bbs.ydss.cn/thread-633848-1-1.html
But I can't download it from there, so if some good soul take time to reupload...
maxx_hr said:
New version by Bule:
http://pan.baidu.com/s/1bp0oFN5
pass: fypg
homepage: http://bbs.ydss.cn/thread-633848-1-1.html
But I can't download it from there, so if some good soul take time to reupload...
Click to expand...
Click to collapse
Is it this one: https://yadi.sk/d/7ytQ8VxSr7nKx ?
IshtaNoob said:
Is it this one: https://yadi.sk/d/7ytQ8VxSr7nKx ?
Click to expand...
Click to collapse
That link is broken... but supposed to be.
New link for new version:
https://yadi.sk/d/B9cXqW8krAMJx
I loved your rom. Just need one thing to make it perfect. That is fm radio app . can i have that???
this rom has the chinese thingy? or it is full english language supported?
Does it supports smart unlock? Bcz i use mi band.
Hi, where is original rom page?
bilal002 said:
Hi, where is original rom page?
Click to expand...
Click to collapse
http://bbs.loorin.com/thread-286009-1-1.html
Project Pixel P1.0
What is Project Pixel?
Project Pixel is a small team of developers that work on porting most, if not all of the Google Pixel features to stock firmwares.
We mostly specialize in Stock Samsung Firmwares, although we may do work on ports of OneUi once in a while. Our objective is to deliver the best performance by using stock firmware whilst also improving upon it by debloating and tweaking whilst also giving you all the features of a Pixel device.
Pixel Pie 1.0 Feature List:1. AdAway
2. Deep Debloat and DeKnoxed (Apps, permissions, framework, unnecessary features-stripped and removed)
3. Dolby Atmos with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
4. Eleven Music (Lineage OS 15.1)
5. Files GO (File Manager)
6. GCam (Note: GCam might not work on all devices, because of hardware compatibility) Version is 6.0
7. Google Calculator
8. Google Calendar
9. Google Chrome
10. Google Clock
11. Google Contacts
12. Google Keep (With Handwriting Libs)
13. Google Lens (Works within Google Photos and Recents in Pixel Launcher)
14. Google Messages
15. GPay (Working Payment Method along with NFC functionality)
16. Google Phone
17. Google Pie Emojis (Not Samsung Ones)
18. Google Play Games
19. Google Tasks
20. GBoard
21. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
22. Pixel Fonts
23. Pixel 3 Boot Animation
24. Pixel 3 Live Wallpapers with Normal Wallpapers
25. Pixel Google Photos (Free Original Quality Storage)
26. Pixel Module V1 - Pixel Animations, framework and configs.
27. Pixel Launcher with new recent menu
28. Pixel Sounds
29. Samsung Digital Wellbeing
30. Samsung App Lock
31. Samsung Gallery (Stripped Down and lightened to improve performance)
32. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes (4k30 at HDR- Not Fully Tested)
33. SystemUI Tuner (Provides battery stats along with other useful customiztions - Check QS icons and add it to QS Panel to view)
34. VoLTE Supported
35. YouTube Vanced (Ad-free Youtube)
CHANGELOG 1.0:
initial release
Bugs:
None
Notes:
1. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
2. Make sure you set Google Phone as your default phone app. Go-to Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
3. After first boot, reboot your device once to ensure dalvik optimization.
INSTALL INSTRUCTIONS:
- As the ROM zip doesn't contain any kernel, is mandatory to have the linked TWRP installed. (Please flash the correct ones)
- For people coming from other ROM than stock, please do a clean flash
- Copy the ROM zip to your phone
- Boot in TWRP and flash the ROM zip
- After flashing the ROM zip, goto Reboot --> Recovery
- Wait for the boot up (5-7 minutes) and setup your ROM to your liking.
- Don't try to update magisk or you'll get a bootloop. If you just tried and got bootloop, reflash the twrp patched with stable 19.3 magisk (link above)
Download Link and Sources:
Feel free to join us telegram via the group: https://t.me/joinchat/G-BflEMjGlgp1NeWxDA2bA
Correct TWRP: https://drive.google.com/drive/folders/1aj2CN-Hy4S_RQOqiwoG6KWvQJJV3ND70
Download Link 1.0 :https://drive.google.com/open?id=11WOWJj5bmsBxnUKHNHk3f93gB7DqL_ZI
(MEGA MIRROR: https://mega.nz/#!WLpVwAyZ!5RAp9nXXJYUpxU5SnKnthVyEPZw70ur9g6U6eNN1lcA)
Magisk:https://github.com/topjohnwu/Magisk/releases
Kernel Source:http://source.samsung.com/
Credits:
Google for Android and Framework
Samsung For Their Kernel
Screenshots: https://imgur.com/a/s4W2RF2
Any difference in this rom and one im using from other moderator?
pankajgavri said:
Any difference in this rom and one im using from other moderator?
Click to expand...
Click to collapse
This one supports TWRP flashing atleast, so yes it is a good idea to dirty flash to this ROM just because it is a new one and will be the one supported from now on
how to get snapchat working?!?!
Eyy, well done Zer0!
S10 plus supported ?
S10e will be supported?
Everything worked fine but after the reboot I hang in the loading screen also a second reboot with root right does not help ... any ideas?
Waleedaligomaa said:
S10 plus supported ?
Click to expand...
Click to collapse
Check my s10+ thread
demolatorul said:
S10e will be supported?
Click to expand...
Click to collapse
yes if you can test then we can get s10e build out very fast
Sent from my SM-G935F using Tapatalk
works with latest firmware update? G973FXXU3ASG8
because i have bootloop (Google-Boot-Animation)
My Steps:
- Updated firmware to G973FXXU3ASG8
- Installed latest Magisk Manager
- patched AP
- installed (magiskpatched) AP via Odin
- installed TWRP App
- downloaded twrp-3.3.1-3-beyond1lte.img via TWRP
- patched twrp-3.3.1-3-beyond1lte.img via Magisk
- flashed (magiskpatched)TWRP via TWRP
All good ....
then...
- boot into TWRP - wiped System, Data, Dalvik Cache and Cache
- flashed ZIP
- flashed Magiskv19.3
- reboot wait 30 min.
- reboot again
- wait over 45 min.
What did i wrong? :crying::crying::crying::crying:
camera wrong
Gcam and Samsungcam don't work，screen black then phone reboot
Bxactions app not detecting bixby button,
In previous pixel rom i changed this setting
Its located in system/usr/keylayout/generic.kl
When you open generic.kl , scroll down to the code no. 703 and change it from VOICE_ASSIST to WINK
It was working
Yesterday i dirty flash your rom and changed this setting but bxaction app is still not detecting bixby button
Please help
TIA
blackxxx15 said:
works with latest firmware update? G973FXXU3ASG8
because i have bootloop (Google-Boot-Animation)
My Steps:
- Updated firmware to G973FXXU3ASG8
- Installed latest Magisk Manager
- patched AP
- installed (magiskpatched) AP via Odin
- installed TWRP App
- downloaded twrp-3.3.1-3-beyond1lte.img via TWRP
- patched twrp-3.3.1-3-beyond1lte.img via Magisk
- flashed (magiskpatched)TWRP via TWRP
All good ....
then...
- boot into TWRP - wiped System, Data, Dalvik Cache and Cache
- flashed ZIP
- flashed Magiskv19.3
- reboot wait 30 min.
- reboot again
- wait over 45 min.
What did i wrong? :crying::crying::crying::crying:
Click to expand...
Click to collapse
Use Beyond ROMs twrp. Because you updated firmware to ASG8 your using ASG8 kernel. Reading the notes tells you, that only ASF3 is supported, which is why he said to use Beyond ROMs TWRP which is based on ASF3.
Also, don't flash Magisk. It now comes as part of the recovery
ch75494012 said:
Gcam and Samsungcam don't work，screen black then phone reboot
Click to expand...
Click to collapse
I think you have the wrong twrp recovery. Use the latest "asf3 twrp" and S-/G-Cam should work again.
Zer0byZer0 said:
yes if you can test then we can get s10e build out very fast
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Yes, just bought a 10e, if you need test
Dose snnadragon s10 work ?
@Zer0byZer0
Guys what are the bugs on S10e I will try to fix them.
Hello everyone !!!
I want to install this ROM but I did not understand the installation procedure very well. For now, I'm with the original ROM with Magisk and TWRP (patched with Magisk 19.4-73). Could you explain to me in detail the procedure please?
Thank you.
Device: Samsung Galaxy S10 SM-G973F
https://twitter.com/ASUS_ROG/status/1236698421953585152?s=19
But then nothing on the BIOS & Firmware page and no OTA either.
https://www.asus.com/us/Phone/ROG-Phone-II/HelpDesk_BIOS/
Now™
And the zip? Nowhere to be seen [emoji849]
Yup
Either it's a leak or early April fool's day lol
The best fail yet from Asus.... lol
Someone tell me why we need a new topic when there isnt anything to make use of?
Welcome to the Future
Android 10 Stable :
Firmware no : 17.0210.2001.60
Changelog
1. When reboot the device after system upgrade, dark screen will last about 30 seconds, depending on data size, before startup animation. Please be patient.
2. Please back up your data before upgrading to Android 10. If you want to downgrade your device's software version to Android 9 by official software package, it will erase all data from your device's internal storage.
3. Upgraded system to Android 10.
4. Support Google Play system update.
5. Removed Go2Pay and tags ability in Gallery.
6. Support more Aura system lighting scenarios when mounting Lighting Armor Case.
7. Added advanced settings to brightness bar on the Quick Settings panel.
8. Applied Call Exclusive mode system-wide. Removed the related setting from Armoury Crate.
9. Added a setting to change the style of power button menu.
10. Added fully gestural navigation in Display setting.
11. Support Android 10 Dark Theme
12. Added "Suggested actions and replies" in notifications' advanced setting.
Official Link (Full firmware): https://dlcdnets.asus.com/pub/ASUS/...S_I001_1-ASUS-17.0210.2001.60-1.1.97-user.zip
mickey36736 said:
Android 10 Stable :
Firmware no : 17.0210.2001.60
Changelog
1. When reboot the device after system upgrade, dark screen will last about 30 seconds, depending on data size, before startup animation. Please be patient.
2. Please back up your data before upgrading to Android 10. If you want to downgrade your device's software version to Android 9 by official software package, it will erase all data from your device's internal storage.
3. Upgraded system to Android 10.
4. Support Google Play system update.
5. Removed Go2Pay and tags ability in Gallery.
6. Support more Aura system lighting scenarios when mounting Lighting Armor Case.
7. Added advanced settings to brightness bar on the Quick Settings panel.
8. Applied Call Exclusive mode system-wide. Removed the related setting from Armoury Crate.
9. Added a setting to change the style of power button menu.
10. Added fully gestural navigation in Display setting.
11. Support Android 10 Dark Theme
12. Added "Suggested actions and replies" in notifications' advanced setting.
Official Link (Full firmware): https://dlcdnets.asus.com/pub/ASUS/...S_I001_1-ASUS-17.0210.2001.60-1.1.97-user.zip
Click to expand...
Click to collapse
the system can't detect the file after restart. no notification pop up to update the system like before. how to install it?
Cant install on my WW rog2. Is not recognised. Is this a Tencent CN version??
anyone has the RAW android 10 file??
Any guide for going from A10 beta 9 to A10 stable on Tencent Edition (WW flashed)?
Download the file and save it to internal. System should be able to detect it after reboot.
Was running on A10 9 prior and now running on stable version.
Zip not recognized when in Beta 9
Vilanjo said:
Download the file and save it to internal. System should be able to detect it after reboot.
Was running on A10 9 prior and now running on stable version.
Click to expand...
Click to collapse
Not recognised here too... meh
If in Android 10 Beta, you'll need to go back to Android 9 stable to install the UL file.
I have installed the UL Android 10 Stable and now Google Pay doesn't work. Says my phone is rooted which it isn't.
My phone is a converted Tencent version to WW with matching WW fingerprint.
I didn't had issues. Also coming from A10 9. Tencent version
Vilanjo said:
I didn't had issues. Also coming from A10 9. Tencent version
Click to expand...
Click to collapse
Does your Google pay work?
Can you use gesture navigation while using a different launcher?
Vilanjo said:
Download the file and save it to internal. System should be able to detect it after reboot.
Was running on A10 9 prior and now running on stable version.
Click to expand...
Click to collapse
So which file should I copy (I downloaded 2)
UL-ASUS_I001_1-ASUS-17.0210.2001.60-1.1.97-user.zip OR WW_ZS660KL-16.0631.1910.64-17.0210.2001.60-03041733-fota-user.zip?
So I copy the file then reboot? Previously after copying an update file it is recognized right away then update proceeds before a reboot is requested
delete
How to install Xiaomi.eu ROM for Xiaomi MI10T Lite [gauguin]
We will release fastboot ROM versions until TWRP for gauguin is released
TWRP for gauguin is RELEASED - So install our ROM in TWRP..
Steps to install our ROM for FIRST TIME from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file HERE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system:
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 10min)
Steps to install UPDATE of our ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file STABLE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system:
For Windows OS ./windows_fastboot_update_rom.bat
For Linux ./linux_fastboot_update_rom.sh
For MacOS ./macos_fastboot_update_rom.sh
- After reboot its done (first boot may take up to 5min)
Update via OTA:
- As usually
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Xiaomi.eu ROM features
Based on China Stable / Weekly builds (except POCOF1, HMNote6Pro, HMNote8T, HMNote9ProMax, HMNote9Pro_HMNote9S, HMNote9ProEU)
Enabled search gesture (swipe up) on the desktop
3way reboot menu (in dev settings)
Dark Mode (Night Mode) for all devices (In the dev settings except 9.x/10.x)
Removed ads in MIUI system apps
Face Unlock for all devices
Vertical clock widget on lockscreen
Steps counter in Assistant screen
More shortcuts on left lockscreen
Wake up gestures
AI preloading option in MIUI Lab
Fullscreen gestures
Option to auto-expand first notification
Notifications priority settings
More edit options in Gallery app
Enabled MiDrive in File Explorer
Added landscape mode for SMS app
Sunrise/Sunset in the weather app
Google apps support integrated
Removed 5GHz region restrictions
Confirm dials from call logs
Morning report on alarm at morning
More apps supported for AOD notifications
More styles for AOD screen
Raise to wake gesture
AOD notification received animation
Default volume control stream toggle
Tap fingerprint sensor to wake toggle
More Camera features
Double tap to lock screen
Battery AI scenes
Allowed disabling specific system apps
Importing theme .mtz from zhuti.xiaomi.com via ThemeManager
No useless Chinese bloatware apps
More free RAM due to less background processes
Unified flat style app icons for both system and 3rd party apps
Advanced menu with color icons
No any Chinese character under the full system
Mi Video, Mi Music, Mi Browser: No any useless Chinese content
No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
Added EU T9 dialer support
Added charging sound switch
Added Screen-OFF animation
Optimized GPS settings for EU
Optimized Battery consumption
Optimized RAM consumption
Added 3D Touch to MI5S 3GB RAM version
Added GSMalphabet into SMS app options
Added more icons grid layout 4x5, 4x6, 4x7, 5x5, 5x6, 5x7 (depends on device)
SafetyNet passed (Google Pay)
Play Store Certified
Deodexed
Added automated tasks in Security app
Added game speed booster
Added erase module (magic elimination) to Gallery photo edit options
Fixed low volume sound via headphone
Charging screen
And more, and more made by our 9 years MIUI mods experience.
Enjoy..
report, camera cannot focus, thx.
is the installation steps the same for global and eu versions?
Yes, can confirm main camera focus doesn't work even with gcam.
New version V12.0.6.0.QJSCNXM released
- fixed Camera focus
Thx! Which file is the weekly Mi10TLite rom?
iniro said:
Thx! Which file is the weekly Mi10TLite rom?
Click to expand...
Click to collapse
There is no weekly yet.
ingbrzy said:
New version V12.0.6.0.QJSCNXM released
- fixed Camera focus
Click to expand...
Click to collapse
How update ROM without data loss? Now I've 12.0.4 xiaomi.eu.. I'have tried flash fastboot ROM without data format, when was released build with camer fix..And there was problems with google play, it FC and can't use it at all.
ingbrzy said:
New version V12.0.6.0.QJSCNXM released
- fixed Camera focus
Click to expand...
Click to collapse
Can it be installed on Redmi Note 9 pro 5g Chinese version phone?
Do Google services work without server connection errors?
Thanks for your work and time
güeter said:
Can it be installed on Redmi Note 9 pro 5g Chinese version phone?
Do Google services work without server connection errors?
Thanks for your work and time
Click to expand...
Click to collapse
Yes..
I tried to flash boot magisk_patched.img in fastboot to root the system , but after restart it returns again to recovery. Оf course, after it could not start, I got the system back with windows_fastboot_update_rom.bat and all system settings made before. Thanks for your work .
Sorry, I used magisk_patched.img from my old bootloader, now everything is fine I just repeated the procedure with magisk from your ROM.
is gauguin twrp out already? where can download? thanks
@ingbrzy - thanks for sharing. Two questions if I may
1. does this ROM support encryption?
2. what exactly do MIUI optimizations in developer settings do? The only difference I noticed so far is that in stock ROM I can't deactivate system notification with MIUI optimizations enabled. So wondering what's the benefit of this feature.
Source code link?
Thank you
Anybody know how to update Google Play System Update. Just tried to install Main Components downloaded at apkmirror but not allowed to update system apps.
Any way to update this manually ?
*Update*
found the answer myself
Just use Mixplorer app
@ingbrzy
i just updated from v12.0.6.0 to v12.0.7.0 with the update method you described (windows version)
Update seems to be flashed sucessfully and device is running so far.
At the update process there was an error with storsec.mbn (something like partition not found)
Is this something to worry about ?
*Update*
according to ingbrzy over at EU forums its not a problem ;-)
der_Kief said:
@ingbrzy
i just updated from v12.0.6.0 to v12.0.7.0 with the update method you described (windows version)
Update seems to be flashed sucessfully and device is running so far.
At the update process there was an error with storsec.mbn (something like partition not found)
Is this something to worry about ?
*Update*
according to ingbrzy over at EU forums its not a problem ;-)
Click to expand...
Click to collapse
How is it for a daily usage? Better than official debloated one? Have you encountered any problems? What about battery? Thanks!
@rafsteam
no problems at all. fluid and battery friendly.
But i didnt had any problems with official ROM as well.
Edit: wrong thread they xiaomi doesnt make it easy with they're model names. I was after the 10 lite and not the t.