Decided to create a new thread on the SE forums since we now have our own forum.
So phhusson made a treble GSI for Android P and I got further with it than with any of the other GSIs.
WIFI and BLUETOOTH both work with this GSI.
Here's what I did to get it working (your mileage may vary and I am not responsible for any broken/ bricked devices as a result of these instructions, ALWAYS MAKE SURE YOU TAKE A FULL TWRP BACKUP OF YOUR DEVICE BEFORE ATTEMPTING THIS):
Unlock bootloader.
Download the latest TWRP from here and flash it. Make sure you're running at least version 3.2.3.
Boot into TWRP, tap on Wipe and then tap on "Format Data" and enter yes. Once it's done, reboot into recovery.
Next flash the latest Xiaomi.EU MiUI 10 Beta rom from here. Download it, transfer it to your phone's storage and then use TWRP to install the zip.
After it has installed, tap on Wipe on the TWRP main menu and swipe to factory reset.
Next flash the treble GSI for Lineage 15.1 from here. Download it, transfer to your phone's storage and then use TWRP to install the image file by tapping on Install, then "Install Image" on the bottom right and then select the Lineage image you transferred earlier. Select the "system" partition on the next screen and install.
Now reboot your phone and wait for Lineage to boot up. Once it has booted successfully, reboot into recovery. Use TWRP to factory reset your device again.
Now follow the steps for an A-Only device on this article
*BUT BEFORE YOU REBOOT, GO INTO THE ADVANCED MENU ON TWRP AND TAP ON "INSTALL ROOT"*. Once Magisk has been installed, reboot into system and hopefully you should boot. If not, try rebooting again and it should work.
Bugs (that I know of):
Audio is really broken and sounds horrible even with headphones plugged in.
You can fix media audio only by flashing the ViPER4Android module through Magisk Manager.
This doesn't fix it for ringtone/notification or alarms though.
FIX FOR NOTCH:
https://github.com/pravsterrr/treble-overlay-xiaomi-mi8se/blob/master/dist/treble-overlay-xiaomi-mi8se.apk?raw=true
Download the APK.
Boot into TWRP.
Mount vendor partition.
Use ADB to move the APK to "/vendor/overlay/"
let me know if you find anything.
pravsterrr said:
Decided to create a new thread on the SE forums since we now have our own forum.
So phhusson made a treble GSI for Android P and I got further with it than with any of the other GSIs.
WIFI and BLUETOOTH both work with this GSI.
Here's what I did to get it working (your mileage may vary and I am not responsible for any broken/ bricked devices as a result of these instructions, ALWAYS MAKE SURE YOU TAKE A FULL TWRP BACKUP OF YOUR DEVICE BEFORE ATTEMPTING THIS):
Unlock bootloader.
Download the latest TWRP from here and flash it. Make sure you're running at least version 3.2.3.
Boot into TWRP, tap on Wipe and then tap on "Format Data" and enter yes. Once it's done, reboot into recovery.
Next flash the latest Xiaomi.EU MiUI 10 Beta rom from here. Download it, transfer it to your phone's storage and then use TWRP to install the zip.
After it has installed, tap on Wipe on the TWRP main menu and swipe to factory reset.
Next flash the treble GSI for Lineage 15.1 from here. Download it, transfer to your phone's storage and then use TWRP to install the image file by tapping on Install, then "Install Image" on the bottom right and then select the Lineage image you transferred earlier. Select the "system" partition on the next screen and install.
Now reboot your phone and wait for Lineage to boot up. Once it has booted successfully, reboot into recovery. Use TWRP to factory reset your device again.
Now follow the steps for an A-Only device on this article
*BUT BEFORE YOU REBOOT, GO INTO THE ADVANCED MENU ON TWRP AND TAP ON "INSTALL ROOT"*. Once Magisk has been installed, reboot into system and hopefully you should boot. If not, try rebooting again and it should work.
Bugs (that I know of):
Audio is really broken and sounds horrible even with headphones plugged in.
Notch still isn't really recognized by the system.
let me know if you find anything.
Hope someone finds a fix for the audio
Click to expand...
Click to collapse
Hi guy,my mi8 also have audio bugs,do you fix it?
Qian Lee said:
Hi guy,my mi8 also have audio bugs,do you fix it?
Click to expand...
Click to collapse
You can fix media audio only by flashing the ViPER4Android module through Magisk Manager.
This doesn't fix it for ringtone/notification or alarms though.
pravsterrr said:
You can fix media audio only by flashing the ViPER4Android module through Magisk Manager.
This doesn't fix it for ringtone/notification or alarms though.
Click to expand...
Click to collapse
THX,I had fixed media audio,and I knows someone use an app to change ringtone,then the ringtone sounds ok
ps:I am sorry for my poor english，hope you can understand :victory:
The phone app,contacts,etc,moat of the system apps might FC.Which annoyed me is the input app,it will FC too
linqihao2333 said:
The phone app,contacts,etc,moat of the system apps might FC.Which annoyed me is the input app,it will FC too
Click to expand...
Click to collapse
最新的pe gsi并没有这些问题。
Qian Lee said:
THX,I had fixed media audio,and I knows someone use an app to change ringtone,then the ringtone sounds ok
ps:I am sorry for my poor english，hope you can understand :victory:
Click to expand...
Click to collapse
Which app // 你用过什么应用程序
great to see mi8 SE moving development
Got the notch detection working with help from phh.
Not responsible for any damage to your device / for any broken devices as a result of these instructions.
FIX FOR NOTCH:
https://github.com/pravsterrr/treble-overlay-xiaomi-mi8se/blob/master/dist/treble-overlay-xiaomi-mi8se.apk?raw=true
Download the APK.
Boot into TWRP.
Mount vendor partition.
Use ADB to move the APK to "/vendor/overlay/"
pravsterrr said:
Got the notch detection working with help from phh.
Not responsible for any damage to your device / for any broken devices as a result of these instructions.
FIX FOR NOTCH:
Download the APK.
Boot into TWRP.
Mount vendor partition.
Use ADB to move the APK to "/vendor/overlay/"
Click to expand...
Click to collapse
It's good to see someone trying to make this rom works. Hope that audio problems will be fixed soon
Great, thank you. I will try it after its done first release with fixed sound issue.
pravsterrr said:
Got the notch detection working with help from phh.
Not responsible for any damage to your device / for any broken devices as a result of these instructions.
FIX FOR NOTCH:
https://github.com/pravsterrr/treble-overlay-xiaomi-mi8se/blob/master/dist/treble-overlay-xiaomi-mi8se.apk?raw=true
Download the APK.
Boot into TWRP.
Mount vendor partition.
Use ADB to move the APK to "/vendor/overlay/"
Click to expand...
Click to collapse
I will try this as well once I get a type c adaptor for my usb otg. Thanks for the tutorial.
The Mi 8 SE isn't my daily driver yet. Should I flash for testing or hold off?
Sorry but how to flash V4A through Magisk?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Silver Wind said:
Sorry but how to flash V4A through Magisk?
Click to expand...
Click to collapse
Download the zip via Magisk Manager and then flash using custom recovery
What's not working???
pravsterrr said:
Got the notch detection working with help from phh.
Not responsible for any damage to your device / for any broken devices as a result of these instructions.
FIX FOR NOTCH:
https://github.com/pravsterrr/treble-overlay-xiaomi-mi8se/blob/master/dist/treble-overlay-xiaomi-mi8se.apk?raw=true
Download the APK.
Boot into TWRP.
Mount vendor partition.
Use ADB to move the APK to "/vendor/overlay/"
Click to expand...
Click to collapse
Hey man, can you make a notch detection for android 8.1 vesion? Hope you can help me with it
new release is up, changelog:
https://github.com/phhusson/treble_experimentations/releases
September security patch
[Samsung Galaxy Note 9] Fix WiFi, brightness and fingerprint sensor
[Samsung Galaxy S9] Support assistant and partial "home" button on S9
Include phh su
[Xiaomi Mi 6X] Fix backlight control on
[Xiaomi ...] Fix sound on Mi 8 *, Poco,
[Xiaomi Mi Mix 2S] Delete fingerprint key event
[Treble app] [Huawei] Setting for hwcomposer overlay bypass option to workaround blur issue
[Treble app] minor fixes
Add support for status bar reduction for notches
Fix webview issue when not using gapps
[Known regression of this version] Broke ro.sf.hwrotation (needed for screen rotation on some devices)
Maybee our sound issue is fixed IT doesnt fixed
New PixelExperience release is up too...
https://github.com/EnesSastim/Downloads/releases
Any issues with mtp? Thanks
technoboi1 said:
new release is up, changelog:
https://github.com/phhusson/treble_experimentations/releases
September security patch
[Samsung Galaxy Note 9] Fix WiFi, brightness and fingerprint sensor
[Samsung Galaxy S9] Support assistant and partial "home" button on S9
Include phh su
[Xiaomi Mi 6X] Fix backlight control on
[Xiaomi ...] Fix sound on Mi 8 *, Poco,
[Xiaomi Mi Mix 2S] Delete fingerprint key event
[Treble app] [Huawei] Setting for hwcomposer overlay bypass option to workaround blur issue
[Treble app] minor fixes
Add support for status bar reduction for notches
Fix webview issue when not using gapps
[Known regression of this version] Broke ro.sf.hwrotation (needed for screen rotation on some devices)
Maybee our sound issue is fixed IT doesnt fixed
New PixelExperience release is up too...
https://github.com/EnesSastim/Downloads/releases
Click to expand...
Click to collapse
is the notch auto detected ?
Related
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
I'm using nano gapps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
https://github.com/crdroidandroid/crdroid_features/blob/9.0/README.mkdn
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
All
Known Issues
Rotate buggy a bit
Links:
CrDroid Builds
6. 20191113: november security patch: https://drive.google.com/file/d/1Pfu7y84PAaI4zydNm-Yo9GqcCvK0yOwP/view?usp=sharing
5. 20191023: october security patch: https://drive.google.com/file/d/12-h2_sWcYKQUp_Q0gU7j9NlFMTGmM5Rp/view?usp=sharing
4. 20190812: august security patch: https://drive.google.com/file/d/1yq0q2Va6LkavCKiNBO3yqKP-IRkL8MOh/view?usp=sharing
4. 20190708: july security patch, kernel up to orignal msm8974 lineage kernel, small sensors update: https://drive.google.com/file/d/1sDZ9FplHpiGyyuE19BFtdvYsgNNcF2yE/view?usp=sharing
3. 20190528: may security patch: https://drive.google.com/file/d/1ch9ehxLL8jUylr2X1w55MKUDmikhYAiW/view?usp=sharing
2. 20190219: fix flip, fix mic gain: https://drive.google.com/file/d/1BwhkVYPwzrq8ELHE3q_MhhuCejd2BY4E/view?usp=sharing
1. 20190217: https://drive.google.com/file/d/1w7QjUyuTt4YEdBi4RySbmaZg_g3j26ZH/view?usp=sharing
Gapps
https://opengapps.org
Recovery
Use official 3.0.2-0 version from: https://twrp.me/samsung/samsunggalaxynotepro122qcom.html
or use my twrp version: https://forum.xda-developers.com/galaxy-note-pro-12/development/recovery-twrp-3-1-1-0-t3684802
Sources
Sources: https://github.com/crdroidandroid
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8974
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte
Thanks
Thanks to CrDroid team
Thanks to LineageOS team
Thank you very much just flashed it on my P905 running good so far!
Is P905 compatible with P900? I'm not familiar with the pertinent diffrences, if any.
I have recognized 3 things :
The notification ton is playing endless in a loop (e. g. happen after install the App (Battery Charge Limit) and connect the Power.... also after reboot :if the charging Level reached... also after reboot: from the trustagebt
The Mic gain is too low for : sound recorder, recorder from WhatsApp, Phone application from WhatsApp, Livechat(Audio) from Postident.
I try the app Microphone Amplifier. Till a little Mic gain was added, the Record in this app was. ok. Without gain, the volume was to low. Uncomfortable there is. no way to save the gain in the System out from this app.
OK Google for example works without any issues
The P905 does not react anymore of the magnet Flip from the cover to switch the screen on/off
dwkindig said:
Is P905 compatible with P900? I'm not familiar with the pertinent diffrences, if any.
Click to expand...
Click to collapse
Unfortunately P900 and P905 has differ hardware (exynos 5420 vs qcom 800). It's not compatible.
mad0701 said:
I have recognized 3 things :
The notification ton is playing endless in a loop (e. g. happen after install the App (Battery Charge Limit) and connect the Power.... also after reboot :if the charging Level reached... also after reboot: from the trustagebt
The Mic gain is too low for : sound recorder, recorder from WhatsApp, Phone application from WhatsApp, Livechat(Audio) from Postident.
I try the app Microphone Amplifier. Till a little Mic gain was added, the Record in this app was. ok. Without gain, the volume was to low. Uncomfortable there is. no way to save the gain in the System out from this app.
OK Google for example works without any issues
The P905 does not react anymore of the magnet Flip from the cover to switch the screen on/off
Click to expand...
Click to collapse
Thanks for feedback.
Flip - I missed that moment, when I added fixes in kernel for p905. Evening will check flip and build
Audio - look like I took a bit more, already discarded audio fixes. Will check today evening.
playing endless in a loop - need to check it in logs, a bit later, may be today\tomorrow.
Valera1978 said:
Thanks for feedback.
Flip - I missed that moment, when I added fixes in kernel for p905. Evening will check flip and build
Audio - look like I took a bit more, already discarded audio fixes. Will check today evening.
playing endless in a loop - need to check it in logs, a bit later, may be today\tomorrow.
Click to expand...
Click to collapse
Hi Valera, it doesn't flash in my device (a p905 that worked well with your previous images). It says:
E3004: This package is for device: viennalte, viennaltexx; this device is .
Updater process ended with ERROR: 7
Error installing zip file ...
I wiped it before, but still it doesn't work.
ultraradical said:
Hi Valera, it doesn't flash in my device (a p905 that worked well with your previous images). It says:
E3004: This package is for device: viennalte, viennaltexx; this device is .
Updater process ended with ERROR: 7
Error installing zip file ...
I wiped it before, but still it doesn't work.
Click to expand...
Click to collapse
This is twrp question (it cannt return name). Look like you have old one.
In any way - right now you can remove check:
extract from crDroidAndroid-9.0-20190217-viennalte-v5.1.zip file: \META-INF\com\google\android\updater-script
remove first 2 lines (assert(getprop("ro.produ......................................)
and add updated updater-script back in archive
Valera1978 said:
This is twrp question (it cannt return name). Look like you have old one.
In any way - right now you can remove check:
extract from crDroidAndroid-9.0-20190217-viennalte-v5.1.zip file: \META-INF\com\google\android\updater-script
remove first 2 lines (assert(getprop("ro.produ......................................)
and add updated updater-script back in archive
Click to expand...
Click to collapse
Thanks. I opted for installing your TWRP and now it does flash and everything works very well (including hotspot), except the microphone which records too low (I suggest you to look for noise cancelation problems).
I believe, I must check, which version I've installed CM or CRDrois... I'm not sure in this moment... Both versions were released at the same time
OK, the first flash from yesterday was CM.
Today I try this Rom:
Simular with sound loop, if I connect the Power for charging (Google is updating all Apps) Only chance to get it silent : push all to 0 (sounds) the tone is parallel to all other sounds.
With this rom I haven't get Magisk Manager to defekt root (Magisk 18.1). It wasn't an issue with CM. With this rom the manager doesn't detect root???
Maybe it's about the app SuperSu from Playstore? Haven't test it right now. I just flash the ROM one again (wipe cache/data/dalvik) Internal SD not. With CM wasn't it possible to mount an USB Stick via OTG cable.
I try to install SuperSU (root & app) afterwards and also to mount an external USB.......
Short update ;
In this rom I can disable the charging notification... (CrDroid settings, near on right hand) the loop is away... that's the good news.
The bad one : I don't receive root access : nor via SuperSu nor via Magisk... Any Hints? A short time I could see teh root settings in the Dev menu, but the corresponding apk did not see root in anycase
mad0701 said:
Short update ;
In this rom I can disable the charging notification... (CrDroid settings, near on right hand) the loop is away... that's the good news.
The bad one : I don't receive root access : nor via SuperSu nor via Magisk... Any Hints? A short time I could see teh root settings in the Dev menu, but the corresponding apk did not see root in anycase
Click to expand...
Click to collapse
Yes, in CrDroid no root options in devs.
But latest Magisk is working great. Install latest Magisk 18.1, then boot and manually install Magisk Manager apk file.
You can do check "safery net" in the magisk manager - it will complete pass.
P.s. mic fixed, flip should fixed too (but I cannt check it right now) - I can make small update for draft check.
Valera1978 said:
Yes, in CrDroid no root options in devs.
P.s. mic fixed, flip should fixed too (but I cannt check it right now) - I can make small update for draft check.
Click to expand...
Click to collapse
I would be interested in an update to check flip cover.
Thanks a lot for continuing the work for that great tablet!
Valera1978 said:
But latest Magisk is working great. Install latest Magisk 18.1, then boot and manually install Magisk Manager apk file.
.....
Click to expand...
Click to collapse
I have used the same Version.... but the Manager 7.0 doesn't detect the Root (18.1) . I have flashed 18.1 some times, reboot ... the Manager didn't saw root. I checked this 3 times ... in between the CM Version ... no luck ?!?!?
Does you install root systemless or let you TWRP patch the System partion ?
Just installed this, Netflix doesn't seem to be working. Can't install it from the play store. (The app is not compatible with this version)
Mad07 said:
I have used the same Version.... but the Manager 7.0 doesn't detect the Root (18.1) . I have flashed 18.1 some times, reboot ... the Manager didn't saw root. I checked this 3 times ... in between the CM Version ... no luck ?!?!?
Does you install root systemless or let you TWRP patch the System partion ?
Click to expand...
Click to collapse
Just checked in the latest 20190219:
1. install crdroid, magisk
2. load into the firmware. install the magisk manager
3. back to recovery and reinstall magisk
4. load firmware
Yesterday, I forgot my eyeglas at work... so only reflash a backup was possible.
In the evening, I give the 19.02 Version a new try.
I'll believe, I know why Magiask Manager didn't see the root: There was also a Bug-Report in the Magisk-Thread, that, if the old Manager is in the Background, the new Manager didn't see Root. On other Hand, I've read, that Magisk dedect root simular as SuperSu. The SuperSu Manager was automaticaly installed from Google Store during Setup the P905 at the first Startup.... I don't should Forget to uninstall SuperSu after first boot
---------- Post added at 12:01 PM ---------- Previous post was at 11:58 AM ----------
Bluewave653 said:
Just installed this, Netflix doesn't seem to be working. Can't install it from the play store. (The app is not compatible with this version)
Click to expand...
Click to collapse
Same as it was in CM 18 (Orego) I've download the apk direct form Netflix ( you can found the link via help on the Netflix HP )
https://netflixhelp.s3.amazonaws.com/netflix-4.16-200217-release.apk
New try with Version 2
Magisk is woerking after uninstall SuperSu
FlipCover Witz Magnet works
Problems:
After each reboot, the Tablett forgot the Standard Launcher (Nova) and New keyboard(Swiftkey)
If the Tablett shoot down with power cable, the shoot down looks like a litte bit irretation
Also it is not possible to Boot the Tablett Düring active charging.
The charging loop sound just be disabled in the settings
Netflix was installed Form the APP store before rooting, hide Magisk, an nupdate was received, working
Thats the first impression after a few Minuten
Usb OTG looks like, that it doesn't work.
There is in this moment no reaction, if I insert an USB with an OTG cable.
Maybe I must change something in the Dev-Settings?
Gesendet von meinem SM-P905 mit Tapatalk
---------- Post added at 06:17 AM ---------- Previous post was at 05:33 AM ----------
The notification Ton has a problem at all, not only with the charging cable. If a notification occurred, the ton is playing in a loop till I pull down the tiles/notification from the top.
I would expect, that this ton is played only one time
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
Gapps (Download from here)
Magisk 24.1 or newer for root - (Download from here)
First time installation:
Flash stock FW 11.0.4.0 (if you have not done so again)
Boot to TWRP via fastboot
Format data
Flash the ROM zip and the TWRP installer zip
Reboot to recovery
Flash Gapps (Optional)
Flash Magisk (Optional)
Format data
Reboot to system
Update installation:
Go to Settings -> System -> Updater and check for updates
Click "Download" and select "Install" once that is done
Install Magisk to other slot from the Magisk app (if you have it)
Press "Reboot" to continue
Sources:
ROM: https://github.com/crdroidandroid
Kernel: Kernel URL
Device tree: Device Tree
Vendor tree: Vendor
Download:
ROM: https://crdroid.net
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/12.1/changelog_daisy.txt
Known issues:
- Flashlight is dead in some apps. This is because Xiaomi camera blobs have issues with Camera2API (HAL3) which is enabled by default, as per A12's requirements.
- Some videos (.webm files) will not play correctly. This is due to some underlying issue with the hardware VP9 decoder
Visit official website @ crDroid.net
crDroid Daisy Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Thanks! That's why. I really appreciate your work.
Download link doesn't work for now, should be fixed soon
Links are up and working, sorry for any inconveniences
Nice rom... Thanks, Dev for keep supporting this device..
New update is up fixing a bunch of issues reported in the previous build
Changelog:
* Resolved some sepolicy issues
* Fixed dual SIM RIL issues
* Fixed the goodix cleaning script
* Fixed the HAL switch once again
* Fixed hotspot bricking WiFi after it was turned off
* Notable kernel changes (from before):
- Upstreamed to 4.9.299
- Some scheduler changes to improve interactivity
I just installed this ROM this morning and its beautiful....
So smooth and I love the look and feel of it.
Great job Dev
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
Irish_Dude said:
I just installed this ROM this morning and its beautiful....
So smooth and I love the look and feel of it.
Great job Dev
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
Click to expand...
Click to collapse
I'll try this rom... giver further feedback about this.
I just installed this ROM this morning and its beautiful....
So smooth and I love the look and feel of it.
Great job Dev
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
NiKabir said:
I'll try this rom... giver further feedback about this.
Click to expand...
Click to collapse
This ROM is 1st class
Ahhhh perfect.
I clean installed this rom yesterday and so far loved it. With linked gapps.
It has been very smooth and bugless.
Battery consumption looks very good, let's see it in a few more days.
The camera, however, is very simple and doesn't have normal options such as panorama.
I don't know if we can have another camera version flashable.
ardanai said:
Ahhhh perfect.
I clean installed this rom yesterday and so far loved it. With linked gapps.
It has been very smooth and bugless.
Battery consumption looks very good, let's see it in a few more days.
The camera, however, is very simple and doesn't have normal options such as panorama.
I don't know if we can have another camera version flashable.
Click to expand...
Click to collapse
Okay, I got it. hahaha
I have installed GCAM and everything looks great now.
Irish_Dude said:
I just installed this ROM this morning and its beautiful....
So smooth and I love the look and feel of it.
Great job Dev
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
This ROM is 1st class
Click to expand...
Click to collapse
You can use battery saver I guess, but there is no way to explicitly remove only that vibration
Irish_Dude said:
I have a quick question:
Is it possible to completely remove vibration when we touch the keypad?
Click to expand...
Click to collapse
If by the keypad you mean the Gboard (Google keyboard): you can go to Gboard preferences and turn off "haptic feedback on keypress"
If you mean the navigation buttons: Accessibility > vibration & haptic strength > touch feedback > off
LinkBoi said:
New update is up fixing a bunch of issues reported in the previous build
Changelog:
* Resolved some sepolicy issues
* Fixed dual SIM RIL issues
* Fixed the goodix cleaning script
* Fixed the HAL switch once again
* Fixed hotspot bricking WiFi after it was turned off
* Notable kernel changes (from before):
- Upstreamed to 4.9.299
- Some scheduler changes to improve interactivity
Click to expand...
Click to collapse
Hi LinkBoi,
Is it possible (if you have time) to make a flashable zip of Gcam for twrp to replace the original Camera? without root
LinkBoi said:
First time installation:
Flash stock FW 11.0.4.0 (if you have not done so again)
Boot to TWRP via fastboot
Format data
Flash the ROM zip and the TWRP installer zip
Reboot to recovery
Flash Gapps (Optional)
Flash Magisk (Optional)
Format data
Reboot to system
Click to expand...
Click to collapse
Hi, just to confirm.. The first "format data" includes system as well or just the "data" check box ?
and if so, could please explain why not system ? Thank you.
savvyyy said:
Hi, just to confirm.. The first "format data" includes system as well or just the "data" check box ?
and if so, could please explain why not system ? Thank you.
Click to expand...
Click to collapse
I believe that is "format data" before you enter to the advanced wipe like wipe system and wipe data.
ardanai said:
Hi LinkBoi,
Is it possible (if you have time) to make a flashable zip of Gcam for twrp to replace the original Camera? without root
Click to expand...
Click to collapse
No, install it normally
Hello and thank you for your work. I have a bug to report about incoming calls. When I get a call, phone rings as it should be but sometimes screen does not wake up on its own and if I try to wake it up manually with power button, the call disappears entirely. Phone keeps ringing but other than that the call can not be seen on the screen. After the caller hangs up I get the "missed call" notification. This happens not so rarely so it kinda makes the rom unusable for me. Funny thing is that same problem happened with some other roms as well both android 11 and 12 builds. I tried to find a solution for this online but I could not find anything, am I the only one who is having this problem?
Mantarsote said:
Hello and thank you for your work. I have a bug to report about incoming calls. When I get a call, phone rings as it should be but sometimes screen does not wake up on its own and if I try to wake it up manually with power button, the call disappears entirely. Phone keeps ringing but other than that the call can not be seen on the screen. After the caller hangs up I get the "missed call" notification. This happens not so rarely so it kinda makes the rom unusable for me. Funny thing is that same problem happened with some other roms as well both android 11 and 12 builds. I tried to find a solution for this online but I could not find anything, am I the only one who is having this problem?
Click to expand...
Click to collapse
I face this issue yesterday..
NiKabir said:
I face this issue yesterday..
Click to expand...
Click to collapse
So it is not just me Still it is a bit weird that no one hardly ever mentioned this in andriod 11 builds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features
Flashing Instructions:
Pre-installation:
Download latest recovery image (download)
Update to latest firmware
First time installation:
Backup your data to PC, OTG flash drive
Enter fastboot
Flash our recovery in both slot:
Code:
fastboot flash recovery_a <recovery_filename>.img
fastboot flash recovery_b <recovery_filename>.img
Reboot to recovery
Do factory reset
Back to recovery main page tap Apply update -> Apply from ADB
Now sideload <rom_filename>.zip using command:
Code:
adb sideload <rom_filename>.zip
If getting message Signature verification failed click Yes.
You'll see process stuck on 47%, Don't worry you'll get Success message just wait.
Now once again do a Factory reset
Reboot
Update installation:
Boot to recovery
Choose Apply update -> Apply from ADB
Now install <rom_filename>.zip via sideload:
Code:
adb sideload <rom_filename>.zip
Reboot
Update OnePlus internal firmware:
Download latest firmware pack (The link is in the Download section)
Reboot to crDroid recovery
Update instruction - LineageOS Wiki (From point 4)
Magisk installation:
Downloading the latest release of Magisk (apk file).
After "clean" (initial) installation :
After installing the firmware in Recovey mode, we reboot again in Recovery (so that the slot change is applied).
Choose Apply update -> Apply from ADB
Now install Magisk.apk via sideload:
[ CODE]adb sideload Magisk.apk[/CODE]
Reboot
After booting the system, install the Magisk program itself
After OTA update :
After installing the OTA update, we do not reboot the system, but launch the already installed Magisk.
Click "Install" (Magisk)
Choose a method - "Install to Inactive Slot (After OTA)
Tap "LET'S GO ->"
After installation - Reboot
Sources:ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8150
Common Device tree: https://github.com/crdroidandroid/android_device_oneplus_sm8150-common
Device tree: https://github.com/crdroidandroid/android_device_oneplus_hotdog
Vendor Common Device tree: https://github.com/crdroidandroid/proprietary_vendor_oneplus_sm8150-common
Vendor Device tree: https://github.com/crdroidandroid/proprietary_vendor_oneplus_hotdog
Download:
crDroid ROM
Recovery Image
OnePlus 7T Pro firmware
Changelog
GAPPS: Already Included
Known issues:
- WiFi display: Sound is not transmitted to some TV models. The sound comes from the phone speakers. 20220730
- OnePlus Camera: Portrait mode 20220708
- OnePlus Camera: Slow Motion Video
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
crDroid OnePlus 7T Pro (hotdog) Telegram group
Busy ...
Busy...
Does Google pay and Android auto work?
Google pay works fine for me
Both are working but I am getting a constant notification of Android system intelligence keeps crashing
crDroid paste - share logs, bugs, code and whatever else remains in plan text
paste.crdroid.net
eddyctweets said:
Both are working but I am getting a constant notification of Android system intelligence keeps crashing
Click to expand...
Click to collapse
What is installed besides the firmware? Magisk modules / Xposed modules?
ShevT said:
What is installed besides the firmware? Magisk modules / Xposed modules?
Click to expand...
Click to collapse
No magisk or xposed, installed as per instructions heres another log
crDroid paste - share logs, bugs, code and whatever else remains in plan text
paste.crdroid.net
eddyctweets said:
No magisk or xposed, installed as per instructions heres another log
crDroid paste - share logs, bugs, code and whatever else remains in plan text
paste.crdroid.net
Click to expand...
Click to collapse
I've just deleted the app so here's hoping it's something I don't need
After updating to 8.2. fingerprint option has disappeared . Even though it's working really find for apps and passwords, but the option to add it to the lockscreen disappeared.
mastrok said:
After updating to 8.2. fingerprint option has disappeared . Even though it's working really find for apps and passwords, but the option to add it to the lockscreen disappeared.
Click to expand...
Click to collapse
Everything is in its place
ShevT said:
Everything is in its place
Click to expand...
Click to collapse
I have both of the screenshots you shared also. But the option to choose fingerprint as an unlock method has just disappeared. Not sure why. I upgraded from the updater app cr droid provides. How did you update?
mastrok said:
I have both of the screenshots you shared also. But the option to choose fingerprint as an unlock method has just disappeared. Not sure why. I upgraded from the updater app cr droid provides. How did you update?
Click to expand...
Click to collapse
Right. There shouldn't be a print. First you need to select the unlock/encryption method. This is the method if the fingerprint doesn't work.
ShevT said:
Right. There shouldn't be a print. First you need to select the unlock/encryption method. This is the method if the fingerprint doesn't work.
Click to expand...
Click to collapse
Great, thank you for your clarification. I still face an issue after adding my fingerprint. That the fingerprint doesnt show on lockscreen. It shows only the pin unlock. So probably there something wrong in my update. I will try clean install and let you know.
mastrok said:
Great, thank you for your clarification. I still face an issue after adding my fingerprint. That the fingerprint doesnt show on lockscreen. It shows only the pin unlock. So probably there something wrong in my update. I will try clean install and let you know.
Click to expand...
Click to collapse
Have you tried holding your finger to the lock button? My finger still unlocks the phone
eddyctweets said:
Have you tried holding your finger to the lock button? My finger still unlocks the phone
Click to expand...
Click to collapse
it always asks for pin. the fingerprint itself doesnt flash white it's like it's turned off
mastrok said:
it always asks for pin. the fingerprint itself doesnt flash white it's like it's turned off
Click to expand...
Click to collapse
Aww ok mine works fine, I did clean flash as per the instructions. The only time I see a fingerprint button is if I have aod on
Hi together fingerprint works fine for me. But on apps the fingerprint is shown on the wrong positon. The reader ist higher then the logo which is shown. Is there a solution for this?
tobasium said:
Hi together fingerprint works fine for me. But on apps the fingerprint is shown on the wrong positon. The reader ist higher then the logo which is shown. Is there a solution for this?
Click to expand...
Click to collapse
Yes I know. I'll see...
tobasium said:
But on apps the fingerprint is shown on the wrong positon.
Click to expand...
Click to collapse
Fixed!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xiaomi Mi 5 [Gemini]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 13.0
Whats working?
Wifi
Wifi hotspot
RIL
Mobile data
GPS
Sensors
Camera
Flashlight
Camcorder
Bluetooth
NFC/GPAY
Lights
Sound / vibration
Fingerprint
WiFi Display
VoLTE
Double Tap To Wake
Buttons swap
Google Voice Match
SELinux enforcing
Safetynet
DON'T FLASH GAPPS, ALREADY INCLUDED
Download standard version from Android File Host
Download PLUS version from Android File Host
Flashing Instructions:
Pre-installation:
Pixel Experience Recovery (Download from here)
First time installation:
Fastboot or flash recovery image
Reboot to new recovery
Click on Factory Reset --> Format data/factory reset
Click on apply update and sideload the zip file or install it using an USB OTG
Enjoy
About Camera App: default camera app is GCAM version SGCAM_8.4.400.42.XXX_STABLE_V35 by Shamim. Everything works fine except 240 fps (1/8) slow motion videos
mandayugana shared his config xml file, which add the specific noise model for Gemini with Shamim GCAM, dowload it from my Github (sgcam-8.4-v35-pe13.xml) or from his post, apply to GCAM following this tutorial and say thanks to him for his great work
XDA:DevDB Information
Pixel Experience, ROM for the Xiaomi Mi 5
ROM OS Version: Android 13
ROM Kernel: Linux 4.4
ROM Firmware Required: MIUI V10.2.2.0.OAAMIXM as minimum target
Based On: AOSP
Source Kernel repo: Link
Gemini device tree repo: Link
Xiaomi msm8996-common repo: Link
Vendor repo: Link
Special thanks to
LineageOS
Pixel Experience
Shamim
xNombre
mandayugana
I'm currently using PixelExperience_gemini_12.1
Is it possible to directly update it via twrp? (I don't have a PC to install PErecovery)
ademuhamad said:
I'm currently using PixelExperience_gemini_12.1
Is it possible to directly update it via twrp? (I don't have a PC to install PErecovery)
Click to expand...
Click to collapse
I haven't tried but could work. Just be sure to format internal storage before rebooting into system
the rom is very laggy, and cpu usage between 50%-100% with nothing open :/
Echidna_Kawaii said:
the rom is very laggy, and cpu usage between 50%-100% with nothing open :/
Click to expand...
Click to collapse
Check what process is eating your cpu in the background, i have no problems at all with cpu usage on screen and with deep sleep
and also this giving Random reboot here :/
Echidna_Kawaii said:
and also this giving Random reboot here :/
Click to expand...
Click to collapse
No one reported random reboots, i never had once in a week of usage. Logs or never happened
-+BB+- said:
I haven't tried but could work. Just be sure to format internal storage before rebooting into system
Click to expand...
Click to collapse
ERROR:1 )l
暗夜很无语 said:
ERROR:1 )l
Click to expand...
Click to collapse
That's why I wrote could, I haven't tried and there are multiple versions of TWRP, if you experience problems flashing the ROM use my recovery
pretty much very stable rom... working everything very smothly...but one issue...after usung 1 or 2 shot with gcam its freeze the cam...and then can't open the gcam anymore...
Unfortunately I can't install it. It would be great if there was a zip file that can be installed with twrp. Thanks for your effort anyway.
after using 2-3 days.. i found some bug
1. after activated vibration mode no vibration icon showing in status bar
2. gcam not working (tried many version)
and after some times phone autometically try to reboot itself but stuck at mi logo.. have to forcefully tap on power button to reboot manually (happened every time i install different version of gcam) i had same issue in lineageOS 19
3. no ota updater option (maybe because its unofficial or i don't know)
4. don't have the option double tab on status bar area to lock screen
5. not showing am/pm in time
İST1907 said:
Unfortunately I can't install it. It would be great if there was a zip file that can be installed with twrp. Thanks for your effort anyway.
Click to expand...
Click to collapse
Could you please post the log of the error during the flash?
mrinfinity0007 said:
after using 2-3 days.. i found some bug
1. after activated vibration mode no vibration icon showing in status bar
2. gcam not working (tried many version)
and after some times phone autometically try to reboot itself but stuck at mi logo.. have to forcefully tap on power button to reboot manually (happened every time i install different version of gcam) i had same issue in lineageOS 19
3. no ota updater option (maybe because its unofficial or i don't know)
4. don't have the option double tab on status bar area to lock screen
5. not showing am/pm in time
Click to expand...
Click to collapse
1 and 5 are AOSP/PE bugs, hopefully will be fixed in QPR2 release
2 don't use Gcam for now, i've fixed hdr+ photos on recent Gcam version in my internal builds but it's still crashing causing a reboot after a minute, i had no time to inspect yet because i was focused on EAS and power HAL port
3 correct, no OTA update app on unofficial builds
4 i'm not 100% sure but if i remember well it's a feature of plus version
@-+BB+-
Thanks for sharing your Mi5 rom with us.
Since Android 12 the Mi5 phone is missing a working TWRP recovery, with support of the fbe encryption. This prevents many users from trying all the new roms, because there is no way to take full backups.
Can you tell me what is the reason?
I would be glad to help the development, but I don't know where to start. If I had someone who can guide me in the process I could do my part. Being part of a team would be ideal.
JackSlaterIV said:
@-+BB+-
Thanks for sharing your Mi5 rom with us.
Since Android 12 the Mi5 phone is missing a working TWRP recovery, with support of the fbe encryption. This prevents many users from trying all the new roms, because there is no way to take full backups.
Can you tell me what is the reason?
I would be glad to help the development, but I don't know where to start. If I had someone who can guide me in the process I could do my part. Being part of a team would be ideal.
Click to expand...
Click to collapse
Unfortunately Pixel Experience doesn't support natively TWRP compiling, and i don't have space on my NVME for another build enviroment. Also as far as i know they did not release yet an Android 13 recovery, they are working right now on it, but i don't know if works. Do you know if TWRP supports FBE on other devices? if TWRP supports FBE then best thing would be compile TWRP in an Android 12 build enviroment with a 4.4 kernel with FBE support. you can use my repos or los repos, it' the same. The only requested changes are a makefile with a basic conf for mi5 and convert the fstab in a compatible version for TWRP
@mrinfinity0007 not fixed yet but probably i've understood what's happening... Could you please try to put selinux in permissive mode and use the camera? You can do with adb:
Code:
adb root
adb shell setenforce 0
adb shell getenforce
The last command checks that selinux is correctly disabled, the output must be 0 or permissive
@-+BB+-
Thank you. Yes, from what I see TWRP supports FBE and A12 on other devices.
But I guess that porting it on our device is not that easy as one could think.
My problem is finding detailed guides to start understanding the process, or at least having a overall view.
Anyway I don't want to post too many OT messages on your thread.
-+BB+- said:
That's why I wrote could, I haven't tried and there are multiple versions of TWRP, if you experience problems flashing the ROM use my recovery
Click to expand...
Click to collapse
Let me try another TWRP version
-+BB+- said:
@mrinfinity0007 not fixed yet but probably i've understood what's happening... Could you please try to put selinux in permissive mode and use the camera? You can do with adb:
Code:
adb root
adb shell setenforce 0
adb shell getenforce
The last command checks that selinux is correctly disabled, the output must be 0 or permissive
Click to expand...
Click to collapse
i don't root my phone? does it work without it?
JackSlaterIV said:
@-+BB+-
Thank you. Yes, from what I see TWRP supports FBE and A12 on other devices.
But I guess that porting it on our device is not that easy as one could think.
My problem is finding detailed guides to start understanding the process, or at least having a overall view.
Anyway I don't want to post too many OT messages on your thread.
Click to expand...
Click to collapse
I will take a look this weekend and let you know because I don't remember where but I'm pretty sure that I read a tutorial for TWRP compiling some years ago
暗夜很无语 said:
Let me try another TWRP version
Click to expand...
Click to collapse
If your goal is to flash the ROM without format the internal memory won't work, you may be able to flash the zip but after the flash you'll be forced to format the internal memory without fbe support
mrinfinity0007 said:
i don't root my phone? does it work without it?
Click to expand...
Click to collapse
Yes it's a root shell, you have root permissions only with ADB, not in your phone. If you want to roll back to selinux enforcing and stop the rooted shell simply reboot the phone, that changes doesn't survive after the reboot
@JackSlaterIV found it, it's old and some things may be slightly different but this is a good tutorial.
Here's the link of the minimal manifest 12.1 is the correct branch but decryption is WIP at the moment, don' t think will work, unless you don't set a password/PIN/pattern, in that way should be fine
@mrinfinity0007 never mind, i've fixed It, Gcam was crashing because it was trying to use hexagon for HDR+, but SELinux was blocking it. Now it's wotking fine even in enforcing mode
PS: i've decided to upload the latest personal build i made, some thing may change because i'm still testing them, but more or less (on device side) this will be the next official release when PE devs will merge QPR2 changes and feb security patch.
Here's the direct link
And here's the changelog:
ROM:
- Synced code with latest PE changes
Kernel
- Ported EAS and set it as default scheduler
- Ported Stune Boost and use it as default
- Fixed almost all compiling warns
- Ported misc optimisations from infinity kernel
- Fixed a bug that could cause the boot to fail (Mi logo --> Black screen --> Mi logo again)
- Misc fixes from upstream
Recovery
- Fixed a bug that could cause the boot to fail (Mi logo --> Black screen --> Mi logo again)
Device Tree
- Ported EAS
- Move to EAS compatible power HAL
- QCOM audio HAL: add missing audio power hints support
- Fixed Google Camera crash when trying to use Hexagon
- Camera: move to Gcam Version MGC_8.1.101_A9_GV2b_ENG big thanks to BSG. Camera can be updated with all APKs released by BSG, just be sure to download the ENG version
- SELinux: fixed all denials
- Ported various improvements from my old 12.1 ROM
- Tuned ZRAM size for 3Gb devices
- Camera: improved camera HAL + misc fixes
- Configure SQLite to operate in MEMORY mode
- Set CFQ as default scheduler
- Added pixel animated wallpapers to build
For more detailed changes take a look at my repos
PS: i cannot test GPAY at the moment because i'm testing other things and i'm running in permissive mode, if someone decide to try the update and use GPAY please let me know if works, i made some changes to sepolicy and i want to be 100% sure that Google pay isn't broken before the official release.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
awakenOS for Xiaomi Pad 5 [Nabu]
Code:
#include <std_disclaimer.h>
/*
* Your warranty is void. Or...Valid? Probably?
*
* Project Awaken and its maintainers are not responsible for bricked devices,
* dead SD cards, data loss, thermonuclear war, or economic crisis caused by
* Awaken OS. YOU are choosing to make these modifications, and if you
* point your finger at me for messing up your device, I will laugh at you.
*/
Born different, now awaken.
Awaken OS brings consistent, fluent and smooth experience with all your must-have customizations, for you, for the community, for everyone.
- Project Awaken Team -
Saikiran [Founder & Lead Developer]
Ninad Patil [Lead Developer]
Mukul [Developer]
Hugwalk [Lead Designer]
Jagadish [Designer]
Glitch [Designer]
Find us on Telegram! @AwakenOSNews
Display
Fonts, Icon shape & Icon pack customizations
Gestures
Advance reboot menu
Double tap to sleep and wake
Navbar customizations
Three finger screenshot
Toggle torch when screen off
Lockscreen
Notification
Pixel Features
Smartspace
Quick Settings
Brightness slider customizations
Security
Sounds
Cycle through ringer modes
Increasing ring volume
In-call vibration
Link ring and notification volumes
Statusbar
4G instead of LTE
Small mobile type icon
Stylus and keyboard aren't working. [Flash permissiver to fix]
First Time Install / Clean Flash
1. Reboot to bootloader (fastboot)
2. Connect your phone to PC
3. fastboot flash boot boot.img
4. fastboot flash vendor_boot vendor_boot.img
5. fastboot reboot recovery
6. adb shell recovery --wipe_data
7. adb reboot sideload
8. adb sideload awaken*.zip(or drag down the rom zip to cmd)
9. adb sideload firmware*.zip (only if there's a firmware update)
10. Type adb reboot once the installation is completed. #beAwakened
11. Reboot to System and #beAwakened
Update / Dirty Flash
1. Download proper flashable ZIP for your device
2. Reboot to Recovery
3. adb reboot sideload
4. adb sideload awaken*.zip(or drag down the rom zip to cmd)
5. adb sideload firmware*.zip (only if there's a firmware update)
6. Reboot to System by typing adb sideload and #beAwakened
Download Here / Official Announcement / Official Community
Kernel Source / Source Code
ROM OS Version: Android 13
ROM Kernel: Linux 4.14.x
ROM Firmware Required: Unlocked bootloader, Latest firmware, Above mentioned recovery
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 3.7
Stable Release Date: 2023-05-11
Created: 2023-03-19
Last Updated: 2023-05-11
Reserved
Is it stable for daily use? And pls add screenshot
Great
Waiting for stylus fix
Waiting for the stylus support. Thanks!
Thanks!
Will this stay official. and have a Long Life time?
edit : Full OTA supported?
Works great, only had it running for 2 days, but love it so far.
Pro:
- super smooth, had some lag on MIUI und even Arrow in some of my apps, all good here
- WiFi works fine, had some problems with that before
- Netflix reports widevine L1
- saftynet passes, even banking app likes it (no root though)
- sound: well equalizer in YouTube music work, which is enough for me
Cons
- had to setup face recognition, cancel only brought me back to Google setup, which then wants to setup face unlock again
Big thanks to devs!
Hi, I really like the rom, everything works fine for now but I noticed two shortcomings,
AwakenOS customizations and features: the rom is missing various features, such as floating windows and some customizations (i think)
Audio: the audio quality is a bit poor and low, i would recommend the developer to add an app like dolby atmos or something else for enhancing the audio quality.
Fast charge: the tab doesnt charge at 20-30w
This is my feedback, I'm not forcing
anyone to follow my advice, but I think this rom has a lot of potential on this device.
Found a lil bug: the battery widget doesnt work, it shows an infinite “loading” screen.
Sending images through Facebook messenger is not possible
Keyvannn said:
Great
Waiting for stylus fix
Click to expand...
Click to collapse
Should work. He says flash permessiver to fix. You just need root. But is this a Magisk Module?
TheEmperor27 said:
Sending images through Facebook messenger is not possible
Click to expand...
Click to collapse
Hello. Did you install this ROM? Everytime I try to do this command: adb sideload AwakenOS.zip I get xfer 0 and it immediately stops. Maybe you can help me...
Edit: I've accidentally downloaded the version for another device. I thought it's the correct one because the download link automatically redirects you to the file. So to all others: Pay attention which File you are downloading.
miracast isnt working how to fix
I hope this helps anybody: The ROM seems to be the best one for this device so far for me. The developer says the Pen doesn't work but it does work for me and i don't know why. The keyboard actually didn't work, even after flashing the Permessive File in Magisk which was attached. It only caused a bootloop. For anyone who wants to use the Xiaomi Keyboard anyway: There is still a way to do that. You just need to have your device rooted. I did it easily via Sideload. Just my attached file. It worked for me after rebooting twice.
And maybe somebody wans to know... I use those Magisk Modules which are very important for me because they add some essential feautures. They are attached.
1. BlockAds: Removes many ads systemwide.
2. Magisk Bootloop Protector: Turns off every Magisk Module when a Bootloop which is caused by Magisk is detected. The attached ones are safe but I recommend using it if you install other Magisk Modules.
3. Magisk Xiaomi Keyboard: Enables the Xiaomi Keyboard in any other ROM than MIUI.
4. Mi Sound: Enables MIUI Dolby Atmos for better Sound Quality and adds the equalizer.
5. Miui Core: You need it to use the Mi Sound Magisk Module
6. Xperia Music: Adds the Xperia Music Player which is usefull for me because there isn't any integrated Music Player in this ROM
Hope it helps anybody
IMPORTANT EDIT: It seems like MIUI Core and Sound Module doesn't work with Magisk Delta and somebody has bricked his device by using the Modules! I can only confirm that they work for me and I even attached some Screenshots in another comment so you can see that they work.
YOU ARE CHOOSING TO USE THESE MODULES AND I AM NOT RESPONSIBLE FOR ANY DEVICE BRICKS!
EDIT 2: Now someone else didn't got it working until trying to use Magisk Delta. I'm was using Magisk 25.2 and now 26.1 and both are working. It means you need to look yourself what works for you and what not. Anyway you may need more then one try because you may get stuck in a bootloop and need to reflash your device.
nabulsi08 said:
I hope this helps anybody: The ROM seems to be the best one for this device so far for me. The developer says the Pen doesn't work but it does work for me and i don't know why. The keyboard actually didn't work, even after flashing the Permessive File in Magisk which was attached. It only caused a bootloop. For anyone who wants to use the Xiaomi Keyboard anyway: There is still a way to do that. You just need to have your device rooted. I did it easily via Sideload. Just my attached file. It worked for me after rebooting twice.
Click to expand...
Click to collapse
Could you please check out the screen mirror / cast function, if you can duplicate the tablet screen onto a smart tv?
UniNick said:
Could you please check out the screen mirror / cast function, if you can duplicate the tablet screen onto a smart tv?
Click to expand...
Click to collapse
Sure, give me a moment
UniNick said:
Could you please check out the screen mirror / cast function, if you can duplicate the tablet screen onto a smart tv?
Click to expand...
Click to collapse
Working. It's just a bit slow like normal but perfect for movies, documents and things like that.
hello987vn said:
miracast isnt working how to fix
Click to expand...
Click to collapse
Sorry, I don't use this app and cannot help you. But the integrated Screen Cast works so maybe you try that.
nabulsi08 said:
Sorry, I don't use this app and cannot help you. But the integrated Screen Cast works so maybe you try that.
Click to expand...
Click to collapse
i used the integrated cast it doesnt display my tv
hello987vn said:
i used the integrated cast it doesnt display my tv
Click to expand...
Click to collapse
Do you have a Smart TV (Android TV)? Just go to the Main Menu and it should work. It has listed my TV immediately.