how to know if my motog5 is 32 or 64 bits please?????
Hatem hesham said:
how to know if my motog5 is 32 or 64 bits please?????
Click to expand...
Click to collapse
All moto g5 are 32bit with stock roms
There are 64bit custom roms available if you choose to flash them
Obviously you would know if you have flashed such a rom or you can download a device info app from the playstore
Arm = 32bit
Arm64 = 64bit
TheFixItMan said:
All moto g5 are 32bit with stock roms
There are 64bit custom roms available if you choose to flash them
Obviously you would know if you have flashed such a rom or you can download a device info app from the playstore
Arm = 32bit
Arm64 = 64bit
Click to expand...
Click to collapse
can you please tell me which custom rom is 64
iam new to this thing
please help me
post the link ?
Hatem hesham said:
can you please tell me which custom rom is 64
iam new to this thing
please help me
post the link ?
Click to expand...
Click to collapse
Look in the Dev section - they are marked 64bit in the title or any custom rom that is android 8 is likely 64bit - read the first post of the rom thread
TheFixItMan said:
Look in the Dev section - they are marked 64bit in the title or any custom rom that is android 8 is likely 64bit - read the first post of the rom thread
Click to expand...
Click to collapse
[ROM][OFFICIAL][8.1.0_r20] AospExtended v5.4
that ROM ?
is it 64 bits !
thanks for helping me
Hatem hesham said:
[ROM][OFFICIAL][8.1.0_r20] AospExtended v5.4
that ROM ?
is it 64 bits !
thanks for helping me
Click to expand...
Click to collapse
Yes any Oreo 8.1 ROM as of now is 64bit
Related
I'm on Aosip ROM.... Before ROM open bete 12 & possible 4.0.3
Recovery 3.0.4 (tested on all recovery)
Sucsecfully flashed other 7.0/7.1.1 Roms
Amar5373 said:
I'm on Aosip ROM.... Before ROM open bete 12 & possible 4.0.3
Recovery 3.0.4 (tested on all recovery)
Sucsecfully flashed other 7.0/7.1.1 Roms
Click to expand...
Click to collapse
Error 7 is usually related to firmware. Check on the thread what is need and flash that before the rom
Thred link please
Amar5373 said:
Thred link please
Click to expand...
Click to collapse
This zip is the firmware and modem for the OnePlus3
https://www.androidfilehost.com/?fid=817550096634750069
According to this thread https://forum.xda-developers.com/on...-aicp-12-0-n-7-0r14-oneplus3-t3478735/page161 you need open beta 12 firmware. Note it's only for the OnePlus3 not the 3T
Check on the Rom thread you are trying to flash for the firmware needed. Just reread your first post, it may be a different firmware for cm/lineage 13. There is a thread on here where all the firmware zips are posted
Amar5373 said:
I'm on Aosip ROM.... Before ROM open bete 12 & possible 4.0.3
Recovery 3.0.4 (tested on all recovery)
Sucsecfully flashed other 7.0/7.1.1 Roms
Click to expand...
Click to collapse
As CM13 is based on Android 6.0 Marshmallow, so you will need the Marshmallow based firmware. Means you can flash OOS3.2.8 stable firmware or open beta7 firmware & then try to flash the ROM.
Link for All Firmware :- https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
This fabulous work is of @jamal2367. Above link contains all the firmware & modem collectibles from android 6.0 through android 7.1.1.
qasimtb said:
As CM13 is based on Android 6.0 Marshmallow, so you will need the Marshmallow based firmware. Means you can flash OOS3.2.8 stable firmware or open beta7 firmware & then try to flash the ROM.
Link for All Firmware :- https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
This fabulous work is of @jamal2367. Above link contains all the firmware & modem collectibles from android 6.0 through android 7.1.1.
Click to expand...
Click to collapse
I was flashed penbeta 7 & 3.2.8 also.....Got same error 7 :crying:
qasimtb said:
As CM13 is based on Android 6.0 Marshmallow, so you will need the Marshmallow based firmware. Means you can flash OOS3.2.8 stable firmware or open beta7 firmware & then try to flash the ROM.
Link for All Firmware :- https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
This fabulous work is of @jamal2367. Above link contains all the firmware & modem collectibles from android 6.0 through android 7.1.1.
Click to expand...
Click to collapse
Flashed firmware + modem bt nothing happened
Amar5373 said:
Flashed firmware + modem bt nothing happened
Click to expand...
Click to collapse
For exact issue can you provide me the details about the ROM that you are trying to flash. Is it Sultanxda's CM or arter97's CM or official CM13
qasimtb said:
For exact issue can you provide me the details about the ROM that you are trying to flash. Is it Sultanxda's CM or arter97's CM or official CM13
Click to expand...
Click to collapse
I'm flashing sultan's ROM....
Pls tell me prosidure of cm13 flashing
Amar5373 said:
I'm flashing sultan's ROM....
Pls tell me prosidure of cm13 flashing
Click to expand...
Click to collapse
Have you visited the ROM thread. There is a link for the Open Beta firmware by Sultan itself.
Have you tried it. If not then 1st flash that firmware as it is tested and working. I too use Sultan 's CM as its very stable.
qasimtb said:
Have you visited the ROM thread. There is a link for the Open Beta firmware by Sultan itself.
Have you tried it. If not then 1st flash that firmware as it is tested and working. I too use Sultan 's CM as its very stable.
Click to expand...
Click to collapse
Pls give me the link
Amar5373 said:
Pls give me the link
Click to expand...
Click to collapse
Link to the ROM :- https://forum.xda-developers.com/on...m-kernel-unofficial-cyanogenmod-13-0-t3444221
Everything you need can be found in the OP's message.
Amar5373 said:
Pls give me the link
Click to expand...
Click to collapse
There are search options every where.. Your not a little kid I hope..
qasimtb said:
Link to the ROM :- https://forum.xda-developers.com/on...m-kernel-unofficial-cyanogenmod-13-0-t3444221
Everything you need can be found in the OP's message.
Click to expand...
Click to collapse
Thanks brother for guide me..... Finally I was flashed cm13 sucsecfully .....
Wipe catch > that file provided on cm13 for( modem open beta+ twrp file) >After that cm13 ROM >GAPPS >DONE :laugh:
Pls tell me any other mod u using on your cm13 Thanks alot brother ,?
qasimtb said:
Link to the ROM :- https://forum.xda-developers.com/on...m-kernel-unofficial-cyanogenmod-13-0-t3444221
Everything you need can be found in the OP's message.
Click to expand...
Click to collapse
Puddi_Puddin said:
There are search options every where.. Your not a little kid I hope..
Click to expand...
Click to collapse
Specially need camera port....
Amar5373 said:
Specially need camera port....
Click to expand...
Click to collapse
http://lmgtfy.com/?iie=1&q=Oneplus+3+camera+port
Amar5373 said:
Specially need camera port....
Click to expand...
Click to collapse
You don't need the camera port for Sultan 's CM. Its already heavily optimized and gives best captures just like Stock OOS camera.
qasimtb said:
You don't need the camera port for Sultan 's CM. Its already heavily optimized and gives best captures just like Stock OOS camera.
Click to expand...
Click to collapse
Kk thanks so much
Hi
Last week a build a GSI ROM for liquid Remix (pie).
I'm looking for tester for my build , it worked well in other a/b devices so I think it would work also (s9 is only A only)
https://androidfilehost.com/?fid=11410963190603880295
Please tell what S9 model and which setup you used (firmware,vendor,kernel) if the ROM booted or Not.
Note : the ROM might not boot with enforcing kernel so try one with permissive type
any user tried the ROM ?
Sorry I thought s9 is ab device but instead it's a only device.
Link updated.
king1990 said:
Sorry I thought s9 is ab device but instead it's a only device.
Link updated.
Click to expand...
Click to collapse
I will try on s9+ snapdragon with december patch
Ellcid01 said:
I will try on s9+ snapdragon with december patch
Click to expand...
Click to collapse
Use only oreo vendor/kernel.
It wont work with pie vendor
king1990 said:
Use only oreo vendor/kernel.
It wont work with pie vendor
Click to expand...
Click to collapse
Didint work on my snap s9+ :fingers-crossed:
Ellcid01 said:
Didint work on my snap s9+ :fingers-crossed:
Click to expand...
Click to collapse
Thanks for testing, which vendor/boot you used ?
I got a result from a tester who was able to boot to rom using pie vendor and permissive kernel.
Can you try it ?
king1990 said:
Thanks for testing, which vendor/boot you used ?
I got a result from a tester who was able to boot to rom using pie vendor and permissive kernel.
Can you try it ?
Click to expand...
Click to collapse
ARL1 oreo vendor sadly latin american snapragon variant dont have stable pie or beta :silly:,used permissive kernel too
Hello !!!
This is a flash rom supported by msmdownloadtools
If you have harbrick but still get to port 9008
Link download: https://androidfilehost.com/?fid=1899786940962592786
Link tools You can consult youtube : https://youtu.be/Dc5aTQntNcA
Ps: If you are using realme Q please try flashing this rom to change it to 5pro. I haven't checked it yet
29y6145 said:
Hello !!!
This is a flash rom supported by msmdownloadtools
If you have harbrick but still get to port 9008
Link download: https://androidfilehost.com/?fid=1899786940962592786
Link tools You can consult youtube : https://youtu.be/Dc5aTQntNcA
Ps: If you are using realme Q please try flashing this rom to change it to 5pro. I haven't checked it yet
Click to expand...
Click to collapse
It'd be a dream come true to change from Q to R5P. The global/india firmware supports all 4G bands here in Hungary, 3 out of 3 unlike China firmware which only supports one.
greenys' said:
It'd be a dream come true to change from Q to R5P. The global/india firmware supports all 4G bands here im Hungary, 3 out of 3 unlike China firmware which only supports one.
Click to expand...
Click to collapse
the msm tool is similar to qpst so i think it is possible to modify the partition for Q like 5pro. Sorry i don't have oppo account so i can't try.
This rom is from the vendor so I'm sure of the reliability
29y6145 said:
the msm tool is similar to qpst so i think it is possible to modify the partition for Q like 5pro. Sorry i don't have oppo account so i can't try.
This rom is from the vendor so I'm sure of the reliability
Click to expand...
Click to collapse
Ah, thanks!
please i need a username and pass msm tool ... can anyone help me?
thnx
I want too change the partitions of my RQ to be a R5pro.
Anyone had successful doing this?
Need username and password ?
nice keep it up
Hello, I would like to install a rom in my LG K40s (LM-X430EMW) with Android 9. The problem is that if I check if my device is compatible with Treble or not in Treble Info it says that is compatible and is ARM32 but uses 64bit binder, in the other hand If I check my device compatibility in Treble Check it says that is compatible and uses a CPU with 32 bit ARM. So my question is: What version from here (https://sourceforge.net/projects/andyyan-gsi/files/lineage-17.x/) should I install on my device? I hope you can help me, I attached some screenshots if you need more information. Thank you very much.
use a64 ab
Hsnmastoor said:
use a64 ab
Click to expand...
Click to collapse
Ok, Thank you very much!
doofus999 said:
Ok, Thank you very much!
Click to expand...
Click to collapse
Your welcome
my man you cant install lineage os because LG k40s has its bootloader locked and fastboot mode hidden
hello I want to run gsi android 10 or 11 on android 8, but they don't start me, I would like to know what I should take into account. Thank you
mir2480 said:
hello I want to run gsi android 10 or 11 on android 8, but they don't start me, I would like to know what I should take into account. Thank you
Click to expand...
Click to collapse
deleted
JuanTamqd21 said:
you need to be atleast on one ui2.x or 3.x
Click to expand...
Click to collapse
sorry but I do not understand. my device is huawei. and the twrp only works on android 8, and from there I would like to be able to install some gsi of android 10,11, or 12
mir2480 said:
sorry but I do not understand. my device is huawei. and the twrp only works on android 8, and from there I would like to be able to install some gsi of android 10,11, or 12
Click to expand...
Click to collapse
In stock ROM, install the Treble Info app (Link here) and check which version is right for your device (I guess you should use A-only). Maybe there is some page referring to this device here on XDA.