Develop Bugs

USB Debugging not accessible

Hi
I was flashing back to Stock from task650 to fix my gps. Well something blew up and when the phone reboots the screen goes black but I hear the AT&T start-up tune. Essentially I can't get to enable USB debugging to reflash. I can get to download or recovery, but there are no files to recover<?> and busybox never got installed.
What do I do now?

Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.

CZ Eddie said:
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
Click to expand...
Click to collapse
Yes I have stock recovery. Odin is of no use because it hangs waiting for the USB debug to respond. And i can't turn it on because the screen is black and I can't navigate

Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release

xBeerdroiDx said:
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
Click to expand...
Click to collapse
Thanks. I created an emergency tool kit on an SD, I wiped data, wiped cache and Davlik and formated system. Flashed the stock rom. When I rebooted it now hung at the Samsung Galaxy S III screen.
How do I get out of this mess?

Try wiping data and cache again in recovery

xBeerdroiDx said:
Try wiping data and cache again in recovery
Click to expand...
Click to collapse
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.

BertMor said:
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
Click to expand...
Click to collapse
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.

xBeerdroiDx said:
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
Click to expand...
Click to collapse
When it rains it pours. Now I can't get into recovery. I get the empty battery graphic cycling on and off, and its very warm to the touch. I think the battery is not charging.
I tried using Odin and flashed a stock rom but I kept getting verification errors and status 7 errors. Things just are not taking. I fear I've got a hard brick and I don't know what to do to fix it.
I appreciate your help

aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?

xBeerdroiDx said:
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
Click to expand...
Click to collapse
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery

it might indeed be drained. leave it plugged in for a while and report back.
you were getting the error/status 7 messages after you flashed cwm back on it likely because the cwm wasnt up-to-date.
what was the last thing you tried before it stopped working altogether?

It gets really hot if I leave it plugged in. But it seems like I can get into recovery again. The last thing I flashed was CMW 6.0.3.1. But what is on it now is CMW 5.5.0.4

actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.

BertMor said:
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
Click to expand...
Click to collapse
xBeerdroiDx said:
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
Click to expand...
Click to collapse
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide

BertMor said:
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
Click to expand...
Click to collapse
Well I think I managed it!. First I tried to install an update d/l'ed from Dropbox and that did nothing. Then I flashed an old .tar that was a rooted stock and it rebooted!
I tried editing the updater-script but I couldn't getit to save the changes properly.
Well I will now re flash the RM and CWM and hope for the best
Thanks for all your help, greatly appreciated

[Q] My phone will not boot up/cannot Access Recovery Mode. ( Samsung Galaxy S3)

Hi guys,
I have a Samsung Galaxy S3 I747m, running Cyanogen Mod and as of right now, it will not turn on. It will begin the boot animation and the freeze once it reaches the end. I cannot access Recovery Mode but I can access Download Mode. This all began when my version of gapps started glitching, or at least Google play Store. I downloaded a new gapps and tried to install it without wiping out the dalvik cache or uninstalling the old gapps. Yes I am a noob at this and an idiot.
Please guys if anyone of you has the patience to tell me what I need to do to get my phone operational again. please do so. My family is not doing well financially right now and can't afford another phone. Please give me some hope. Please.

Well.....I'm not expert but I can tell you its not hard bricked. So you're safe for now. I suggest checking out how to flash another OS using download mode. I believe it involves using your sd card as a "bootable media". (Like, usb stick for windows 7)
Do some research about that. And I think it should work.

Try this!
ABCordova said:
Hi guys,
I have a Samsung Galaxy S3 I747m, running Cyanogen Mod and as of right now, it will not turn on. It will begin the boot animation and the freeze once it reaches the end. I cannot access Recovery Mode but I can access Download Mode. This all began when my version of gapps started glitching, or at least Google play Store. I downloaded a new gapps and tried to install it without wiping out the dalvik cache or uninstalling the old gapps. Yes I am a noob at this and an idiot.
Please guys if anyone of you has the patience to tell me what I need to do to get my phone operational again. please do so. My family is not doing well financially right now and can't afford another phone. Please give me some hope. Please.
Click to expand...
Click to collapse
I would try and flash a new recovery image either twrp or cwm through download mode using Odin and try getting back into recovery and clean flash cyanogenmod and gapps all over again. Basically start from scratch and see if it fixes the problem, if you can get in to recovery mode after flashing a new image you may only need to wipe cache/dalvik to fix it but I'd start with trying your best to get a recovery image reflashed and the ability to get into recovery mode. You can find the images for recovery at the official sites either twrp or clockwork recovery and the instructions on how to flash them anywhere by searching through Google! Hope this helps you

From download mode you can flash a stock firmware with Odin unless you have installed the stock 4.3 update. This will wipe your phone but you will have it booting and recovery back.

NightyNineNights said:
I would try and flash a new recovery image either twrp or cwm through download mode using Odin and try getting back into recovery and clean flash cyanogenmod and gapps all over again. Basically start from scratch and see if it fixes the problem, if you can get in to recovery mode after flashing a new image you may only need to wipe cache/dalvik to fix it but I'd start with trying your best to get a recovery image reflashed and the ability to get into recovery mode. You can find the images for recovery at the official sites either twrp or clockwork recovery and the instructions on how to flash them anywhere by searching through Google! Hope this helps you
Click to expand...
Click to collapse
Thank you so much! However, in the Clockwork Mod website, it does not say anything about downloading Clockwork Recovery. What should I do from this point? Also, some people suggest installing an entirely new OS. Would this be a better or worse solution compared to flashing Clockwork Mod Recovery?
Thank you once again!

BCSC said:
From download mode you can flash a stock firmware with Odin unless you have installed the stock 4.3 update. This will wipe your phone but you will have it booting and recovery back.
Click to expand...
Click to collapse
Another user here suggested flashing Clockwork Recovery. Which one one in your opinion is the best option and what are the disadvantages/advantages of both?

ABCordova said:
Another user here suggested flashing Clockwork Recovery. Which one one in your opinion is the best option and what are the disadvantages/advantages of both?
Click to expand...
Click to collapse
As for your previous post, the Clockwork downloads are under the 'Rom Manager' tab here: http://www.clockworkmod.com/.
Twrp recovery here: http://teamw.in/project/twrp2 (Hit 'Get TWRP for your device' then this link at bottom of page 'Download - Odin Flashable Tar:').
Which you chose depends on which you had before the issue and whether you want to restore a previous backup once recovery is restored. If you are not going to be restoring a back up, I'd recommend the TWRP file as it can be flashed with Odin.
Your other option is to Flash a stock firmware from Odin and start from scratch. This can be the more labor intensive way because you then need to setup the phone again and get it back to how you like it. The benefit of this method is that it wipes absolutely everything, including whatever problem had you screwed in the first place. Because I tinker with my phone a lot, I always have everything important stored on an external SD. Pictures, Titanium Backup, Nandroid, etc. If you have backups of everything you need off the phone, I'd recommend that you Odin it. If you do not have things backed up try installing recovery first and getting the phone to boot. In the end if you do chose this method you should still wipe as there was obviously something that really buggered your phone and a wipe will be the best way to fix that so it doesn't recur. That's my opinion anyway.

Update!
Apparently I can access Recovery Mode now!! However, it still does not boot up. I backed up all my filed to my external 8GB SD card, and then wiped the dalvik Cache. Nothing. I did a full Factory reset and still nothing. AM I missing a step? Is there a step I should take before or after clicking full wipe? The phone boots all the way to cyanogen mod logo, where an arrow spins around it. However, that's all it does.
Any ideas?

ABCordova said:
Apparently I can access Recovery Mode now!! However, it still does not boot up. I backed up all my filed to my external 8GB SD card, and then wiped the dalvik Cache. Nothing. I did a full Factory reset and still nothing. AM I missing a step? Is there a step I should take before or after clicking full wipe? The phone boots all the way to cyanogen mod logo, where an arrow spins around it. However, that's all it does.
Any ideas?
Click to expand...
Click to collapse
So you can access recovery mode?
*Before you follow the next steps, understand everything will be deleted from your PHONE, NOT sdcard.*
You have to wipe everything clean. That means(in recovery mode):
Wipe Data/factory reset
Wipe cache partition
Wipe dalvik cache
Then you would install your rom. From there everything should work. Also, are you installing CM10.2? 10.1? 11? (I personally suggest 10.2.)

[Q] "gapps stopped" loop after CWM restore

Hi,
I was frustrated with the delay in T-Mobile's release of KitKat for the GSIII, so I decided to root my phone last night in order to try flashing CM11 on it. Rooted my phone with Towelroot, installed ROM Manager and CWM, and created backups on Kies and through CWM. Then I proceeded to do data wipe/factory reset, cache wipe, and /system format. Tried to flash CM11, but got a status 7 error.
I freaked out, so I decided to restore everything from the backup I'd created. Restoration seemed like a success, but now I get the error "Unfortunately, the process com.google.process.gapps has stopped" in an endless loop, and it prevents me and any apps from doing anything. I tried clearing dalvik cache in recovery, but the problem still persists. Read on a few threads that I should flash to stock firmware via Odin, but I'm currently on a macbook, so I can't install it.
tl;dr - Prepped to flash CM11, reached status 7 error, got freaked out, and did restore via CWM, only to get infinite loop of gapp crashes. No access to Odin or PC. Not hard bricked or soft bricked, but essentially useless phone. Help? );

if you can still get to recovery, download latest gapps and flash that

Did you factory reset before or after you restored your back up?

Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:

Try to factory reset again

vvnn said:
Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:
Click to expand...
Click to collapse
If I'm not mistaken, there is some device ID that will change each time you flash a new rom. It may be something to do with this ID not matching the one in the restored data. Purely a guess but seems logical to me.
Anyway, factory resetting will most likely solve this for you, but I wanted to add that except in certain circumstances, you shouldn't ever manually format /system. (and one format on any partition is sufficient. There shouldn't be any need to format multiple times). If you format /system, you are wiping the O/S off of your device. Then what happens if you have problems flashing a rom, or firmware? I've seen it happen many times and I often end up spending a couple of days working with them just to get the thing to boot up again!
When you flash a rom, the first thing it does is format /system. So there is just no need to do this manually. At least if the rom fails to flash (such as failing the assert checks), youll still have something to boot into. Hope this helps in the future!

I have had the exact same issue. I have a Samsung note 2 N7105. I rooted made a backup in CWM and flashed ditto n3/s5 rom made another backup in CWM. No issues. Got a bit cocky seen as it was my first time doing anything like that. My next adventure was to try a custom kernel (agni). This didn't go so well, so I tried to do a restorw to my working backup of ditto n3/s5 rom through CMW. restore went smoothly and the phone booted. once I opened the lock screen I got the gapps error as described. I had to do a factory reset to get the phone working and then re-flashed ditto n3/s3. I've since flashed other roms and when ever I try to do a restore, I get the issue described. Note I am using the latest CWM. I putting off flashing and trying any other ROMs because of this issue. I do love dn3/s5 but id love to try others. Anyone can help it would be appreciate.

Reboot after booting to recovery

I'm using an AT&T M8, BL unclocked through HTCdev, Sunshine S-OFF, SuperCID.
Yesterday, I flashed PA. Today, I decided to restore my nandroid for Viper.
I rebooted to recovery (TWRP), wiped my data, and then told it to restore my backup of Viper. Almost immediately after doing so, my phone rebooted without completing the restore. I tried then rebooting to recovery, and wiping /system before doing the restore, in the belief that it was a Sense/AOSP conflict. However, TWRP decided to reboot before I could even start the restore.
Now, I don't have an OS to boot to, and TWRP continually reboots 10-15 seconds after it boots.
I've tried updating my recovery, which was successful, but this did not seem to have an effect.
I've also tried clearing cache with fastboot, and while this was also successful, it also has not had an effect.
Has anyone seen this happen before?
Edit:
I've installed PhilZ recovery, and it no longer reboots immediately after booting to recovery. However, each time it starts, it gives a series of "E: Can't Mount /cache/recovery"...etc.
When I try to wipe data in PhilZ, it reboots again. I've tried reflashing PA, but it gave me a "E: failed to set up expected mounts for install; aborting".

OMGMatrix said:
I'm using an AT&T M8, BL unclocked through HTCdev, Sunshine S-OFF, SuperCID.
Yesterday, I flashed PA. Today, I decided to restore my nandroid for Viper.
I rebooted to recovery (TWRP), wiped my data, and then told it to restore my backup of Viper. Almost immediately after doing so, my phone rebooted without completing the restore. I tried then rebooting to recovery, and wiping /system before doing the restore, in the belief that it was a Sense/AOSP conflict. However, TWRP decided to reboot before I could even start the restore.
Now, I don't have an OS to boot to, and TWRP continually reboots 10-15 seconds after it boots.
I've tried updating my recovery, which was successful, but this did not seem to have an effect.
I've also tried clearing cache with fastboot, and while this was also successful, it also has not had an effect.
Has anyone seen this happen before?
Edit:
I've installed PhilZ recovery, and it no longer reboots immediately after booting to recovery. However, each time it starts, it gives a series of "E: Can't Mount /cache/recovery"...etc.
When I try to wipe data in PhilZ, it reboots again.
Click to expand...
Click to collapse
I don't think the recovery was "restored" / flashed to the boot partition but maybe try just in case. Flash the boot.img for Viper ROM and see if it stops the bootloop. After that you can make a clean wipe and install the ROM again, not restore but INSTALL. You surely have the ROM's .zip still?
Reason I suggested boot.img: i cannot get anything to restore with the h3g__001 backups keep getting recovery.emmc.win' is larger than target device '/dev/block/mmcblk0p42 error
mmcblk0p42 is the boot partition, so I don't know why TWRP tried to restore/flash a recovery to boot partition. He solved it by manually flashing boot.img after renaming.
if anyone gets this error heres how i solved it.change the boot.emmc.win to boot.img and it let me restore
Just a suggestion...

So this has been thoroughly confusing.
It seems that I had to clear the cache several times in PhilZ in order to resolve the first error. I tried to flash the original rom zip for Viper, but it still failed even though the "E: can't mount" messages weren't showing any more. However, I was able to re-flash the rom zip for PA, and upon booting, I found that Many of my apps were still there dispite the fact that they should have not been.
I then was able to reboot to recovery and flash the zip for Viper.
No clue what happened, but at least if anyone else has this problem, they'll be able to see how I fixed it

OMGMatrix said:
So this has been thoroughly confusing.
It seems that I had to clear the cache several times in PhilZ in order to resolve the first error. I tried to flash the original rom zip for Viper, but it still failed even though the "E: can't mount" messages weren't showing any more. However, I was able to re-flash the rom zip for PA, and upon booting, I found that Many of my apps were still there dispite the fact that they should have not been.
I then was able to reboot to recovery and flash the zip for Viper.
No clue what happened, but at least if anyone else has this problem, they'll be able to see how I fixed it
Click to expand...
Click to collapse
The apps will be there if you restored without making changes to the data partition which contains the your userdata. I've converted and changed over from International to Developer edition quite a few times now and not once in all those times did I lose my data, I just never restored the data partition.
Not sure if you have to actively choose whether to flash over data or not, I'm not that big into custom ROMs, only tried Viper ROM and even then I kept my original data.

OMGMatrix said:
I'm using an AT&T M8, BL unclocked through HTCdev, Sunshine S-OFF, SuperCID.
Yesterday, I flashed PA. Today, I decided to restore my nandroid for Viper.
I rebooted to recovery (TWRP), wiped my data, and then told it to restore my backup of Viper. Almost immediately after doing so, my phone rebooted without completing the restore. I tried then rebooting to recovery, and wiping /system before doing the restore, in the belief that it was a Sense/AOSP conflict. However, TWRP decided to reboot before I could even start the restore.
Now, I don't have an OS to boot to, and TWRP continually reboots 10-15 seconds after it boots.
I've tried updating my recovery, which was successful, but this did not seem to have an effect.
I've also tried clearing cache with fastboot, and while this was also successful, it also has not had an effect.
Has anyone seen this happen before?
Edit:
I've installed PhilZ recovery, and it no longer reboots immediately after booting to recovery. However, each time it starts, it gives a series of "E: Can't Mount /cache/recovery"...etc.
When I try to wipe data in PhilZ, it reboots again. I've tried reflashing PA, but it gave me a "E: failed to set up expected mounts for install; aborting".
Click to expand...
Click to collapse
Had that exact same issue as you. What version of twrp were you running when the issue started? Also, did you make any firmware upgrades or downgrades recently?
I ended up just running an RUU and starting over. I was able to adb pull all my files from internal sd card before i ran it.

mattprice86 said:
Had that exact same issue as you. What version of twrp were you running when the issue started? Also, did you make any firmware upgrades or downgrades recently?
Click to expand...
Click to collapse
I was using a version of TWRP that had been bundled with a previous version of Viper that was supposed to have been newer, but was actually 2.7.0.1. I updated to the newest (2.8.0.3) from the TWRP site through fastboot, but that didn't change anything. I had somewhat recently updated to the 3.xxx.xxx.7 firmware, but had flashed other roms since that without issue.
BerndM14 said:
The apps will be there if you restored without making changes to the data partition which contains the your userdata. I've converted and changed over from International to Developer edition quite a few times now and not once in all those times did I lose my data, I just never restored the data partition.
Click to expand...
Click to collapse
I did a factory reset (cache, Dalvik, data) before attempting the nandroid restore.
It looks like TWRP failed to actually do the reset in the first place, which caused it to get hung up thinking that the storage was actually being used.

OMGMatrix said:
I did a factory reset (cache, Dalvik, data) before attempting the nandroid restore.
It looks like TWRP failed to actually do the reset in the first place, which caused it to get hung up thinking that the storage was actually being used.
Click to expand...
Click to collapse
Doesn't matter mate, if you restore the data partition the backup that you made of data gets restored, period. It'll be another issue worth interest if you deselected "data" while doing the restore. As you clearly stated yourself, you did a factory reset(wipe all) BEFORE you did the nandroid restore(In which case you might have restored "Data" as well), in that case the factory reset doesn't matter at all. If you did it after you restored then, again, it's something different.

BerndM14 said:
Doesn't matter mate, if you restore the data partition the backup that you made of data gets restored, period. It'll be another issue worth interest if you deselected "data" while doing the restore. As you clearly stated yourself, you did a factory reset(wipe all) BEFORE you did the nandroid restore(In which case you might have restored "Data" as well), in that case the factory reset doesn't matter at all. If you did it after you restored then, again, it's something different.
Click to expand...
Click to collapse
I don't think you understand.
The restore never happened. It rebooted before anything happened when I told it to restore. Nothing got restored.

Stuck in bootloop. Fastboot and recovery working just fine.

Background:
1. Was on the latest Resurrection Remix. Made a Backup with TWRP.
2. Went back to stock [MTC20F] using this.
3. Updated to 7.0 using this threads 7.0 OTA.
4. Made a Backup in TWRP.
I restored the backup from point 1, but now my phone won't boot anymore.
It shows the boot animation for about 1 second. Goes black and reboots.
I tried restoring to 6.0.1 using the method in point 2 -> same problem.
Tried restoring to 7.0.0 using the same method -> same problem.
After that, I tried restoring from both of my TWRP backups. Neither of them get any further.
So, no matter what I do I cant get past the first second of the boot animation.
I'm out of ideas, any help is greatly appreciated!
TWRP version 3.0.2.1

MiePx3 said:
Background:
1. Was on the latest Resurrection Remix. Made a Backup with TWRP.
2. Went back to stock [MTC20F] using this.
3. Updated to 7.0 using this threads 7.0 OTA.
4. Made a Backup in TWRP.
I restored the backup from point 1, but now my phone won't boot anymore.
It shows the boot animation for about 1 second. Goes black and reboots.
I tried restoring to 6.0.1 using the method in point 2 -> same problem.
Tried restoring to 7.0.0 using the same method -> same problem.
After that, I tried restoring from both of my TWRP backups. Neither of them get any further.
So, no matter what I do I cant get past the first second of the boot animation.
I'm out of ideas, any help is greatly appreciated!
TWRP version 3.0.2.1
Click to expand...
Click to collapse
Did you boot into recovery and do a factory reset in there. Sometimes that works.

jsgraphicart said:
Did you boot into recovery and do a factory reset in there. Sometimes that works.
Click to expand...
Click to collapse
Yep, every time I try to restore something I wipe everything. Also tried to lock and unlock the bootloader. No Luck.
Also tried wipe and erasing every partition possible, flashing an older 6.0.1 build.
Am I SOL? I tried anything google would give me....

Hey, I'm currently in the very same situation. Was on 6.0.1 stock rooted, applied 7.0 OTA using the beta program. Then for various reasons wanted to roll back to where I was with 6.0.1, but now the device just constantly reboots. I have wiped everything I can, tried to flash the factory images multiple times, but nothing seems to do the trick.

same problem here
i was on rooted android n preview 5 with twrp recovery and root, i applied 7.0 ota and then it bricked
now it starts up till bootscreen with the 4 coloured dots it freezes and goes in a bootloop but fastboot and recovery working fine
flashed a factory image wiped everything tried diffrent things restored a twrp backup but nothing
now im going to try to flash 7.0 ota again

Also in the same situation :crying:. Gets to the boot animation for 1 second then freezes and restarts.
Updated to 7.0 and got stuck in a bootloop.
Then tried restoring my TWRP backup to no avail.
Then tried flashing 6.0.1 factory image and still no luck.
Done factory resets, wiped system, data partitions etc, and still same problem.
If anyone has any other ideas that would be greatly appreciated!

this is what i tried so far
-wiped and restored 3 diffrent backups
-full wipe and flashed diffrent roms
-flashed factory image 6.0 and 6.0.1
-flashed 7.0 ota zip in twrp (extracted and flashed system.img and vendor.img )
-flashed factory image and used stock recovery to flash 7.0 ota.zip trough ADB sideload
i think im going to relock the bootloader and just send it back to google for a repair

I'm on the same situation
32 hours after updating to final 7.0 from stock dp5 the device turned off and stuck on boot animation
it seems like google did something wrong...

Looks like some people with the 6P are having the same issue as well. Still no fix either.
http://forum.xda-developers.com/nexus-6p/help/botched-nougat-install-phone-boot-loop-t3445709

I've had the same problem. I was coming from from a Pure Nexus install and thought i'd have a look at 7 so I made a full backup in TWRP then installed the lastest TWRP (twrp-3.0.2-1-bullhead). Then did a full wipe all bar internal storage and flashed radio/bootloader zip and Stock+ rom from the tupac4u thread which worked fine. Upon deciding there were a few dealbreakers for me I decided to go back to PN. So I booted back into TWRP, wiped again and restored the previously made backup. that's when I was getting the boot to 4 dots and reboot bootloop. I tried everything flashing various MM roms, and flashing 7 again, different roms / vendor images / full wipes including int storage, all via TWRP and ADB to no avail.
Though this evening I decided to go to an even earlier version of TWRP (twrp-3.0.0-1-bullhead) and try everything again. I flashed that and tried the repair filesystem on all the partitons I could, one of them gave an error I can't remember what it was. After doing that I did a full wipe and restored my PN backup, everything ticked. I then rebooted with everything crossed and it worked, it booted without any problems! (apart from the fact i'd forgot to remove the pin security before backing up so had to reflash anyway! which also worked). I can't be sure which part of that fixed it but if it helps anyone else that's great!

People with this problem - Does flashing new Factory Image 7.0.0 (NRD90M) fix something?
Just curious.

zeesyl said:
People with this problem - Does flashing new factory image 7.0.0 (NRD90M) fix something?
Just curious.
Click to expand...
Click to collapse
Nope, changed nothing in my case at least. At this point I'm just going to use the warranty card to get out of this mess, as nothing seems to revive the device.

MiePx3 said:
Background:
1. Was on the latest Resurrection Remix. Made a Backup with TWRP.
2. Went back to stock [MTC20F] using this.
3. Updated to 7.0 using this threads 7.0 OTA.
4. Made a Backup in TWRP.
I restored the backup from point 1, but now my phone won't boot anymore.
It shows the boot animation for about 1 second. Goes black and reboots.
I tried restoring to 6.0.1 using the method in point 2 -> same problem.
Tried restoring to 7.0.0 using the same method -> same problem.
After that, I tried restoring from both of my TWRP backups. Neither of them get any further.
So, no matter what I do I cant get past the first second of the boot animation.
I'm out of ideas, any help is greatly appreciated!
TWRP version 3.0.2.1
Click to expand...
Click to collapse
Type fastboot -w flash falsh vendor vendor.img then restore from your twrp backups

neaznc021 said:
OMG I finally got mine to work
I'll note down the exact steps , most of which may or may not be relevant
1) Flashed MTC20F using TWRP 3.0.2-1
2) Booted into recovery and wiped everything and the partitions
- Add - Booted back into twrp 3.0.2-1 and then swiped to allow modifications
3) Then fastboot flashed TWRP 3.0.2-0
4) Restored my backup ( except recovery)
5) Still got stuck in the google screen.
Now the next parts are a bit weird
6) Booted into TWRP, flashed vendor.img from pure nexus rom
7) wiped everything except internal storage
8) Flashed vendor.img, pure nexus rom and gapps and then flashed vendor.img again
9) Rebooted and it worked
Let me know if it worked for you guys or if you need any more help
Click to expand...
Click to collapse
this worked for me

neree said:
Nope, changed nothing in my case at least. At this point I'm just going to use the warranty card to get out of this mess, as nothing seems to revive the device.
Click to expand...
Click to collapse
Did that yesterday (With my N6P), will see what will come out of it. (Service guys said, that ''Oh, it's nothing serious, tomorrow (today) you will get your phone back (hopefully in working condition)''. I'm not so sure about that
(EDIT: Before I took my phone to warranty service, I flashed latest MM factory image and locked bootloader, maybe it was unnecessary, but I wanted to be sure, that phone looks fresh, maybe it was a big mistake.)

I had the same Bootloop issue, and it's all because of TWRP 3.0.2-1 !!! I have just reverted back to TWRP 3.0.2-0, and my backup restored just fine. There's no point for all that flashing. Just revert the TWRP.

Oh my... Guess what? My backup is corrupted...
Edit: maybe this can help, before bricking with full factory image, I flashed bootloader, radio, boot, vendor, system, Elementalx and supersu, wiped data and booted and work.
But I had problems with suspersu installed as systemless (it didn't work), so I flashed factory image. And bootlooped.
So, I'd say that what's causing issue is userdata, recovery or cache.