I recently flashed a combination rom then stock from Sammobile in order to try to bypass FRP lock I repeated this a few times and both the combination rom and stock flashed fine but after flashing the same combination rom Its not working now the phone is stuck in factory binary and Odin will not flash any version 7 stock roms(I got all my roms from SAMMOBILE) I always end up with SW REV CHECK FAIL: (abl)Fused 4 > Binary 2 on my phone screen or something similar. If I use Prince comseys version of odin I end up with a dismatch error instead of rev check. If I flash an 8.0 stock rom it will complete quickly but the phone still boots into factory binary. Any help?
Model: SM-G955U(SS)
PDA: FA70_G955USQU4ARE1
Phone:G955USQU4CRE1
P_S/N:Unknown
H/W: Rev 1.0
CAL.D:2017.04.17
Memory: 64GB
Solved. I was using the combination rom FA70_G955USQU4ARE1 with a V4 bootloader. I used odin v3.13.1 and flashed verizion G955USQU4CRE9 from Sammobile including the bootloader and it fixed my phone.
Alicxxx said:
Solved. I was using the combination rom FA70_G955USQU4ARE1 with a V4 bootloader. I used odin v3.13.1 and flashed verizion G955USQU4CRE9 from Sammobile including the bootloader and it fixed my phone.
Click to expand...
Click to collapse
hi..i has the same situation with you..can you teach me how do you solved it.i try using the same combination rom and verizion G955USQU4CRE9 but it not work..
Related
Help, my phone is now stuck on the second samsung logo and wont boot to desktop.
I was on Phoenix Rom v15.7 and upgrading to Phoenix Rom 16, after flashing phoenix rom 16, my phone stuck in bootloop and cannot enter into recovery mod. So I decided to download stock 4.3 N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar from sammobile and flash it using odin. Even after that, my phone is still stuck on the second samsung logo. So I tried to flash pit file and the stock rom from before, still no result at all...
My download screen now shows:
Odin Mode
Product Name : GT N7100
Custom Binary Download : Yes (13 Counts)
Custom Binary : Samsung Official
System Status : Custom
Knox Warranty Void : 1
AP SWREV : A2
I tried to flash 4.1.2 Rom using Odin but It cannot flash the sboot.bin and shows on the download mode screen unsupported version, Tried to downgrade my bootloader from 4.3 with dr ketan MJ5BLPatch.tar and get the same result as the 4.1.2 rom. I can now access recovery and download mode, but cannot successfully boot, tried to flash phoenix rom v15, still failed
Please help, I'm Stuck... :crying:
shinobu91 said:
Help, my phone is now stuck on the second samsung logo and wont boot to desktop.
I was on Phoenix Rom v15.7 and upgrading to Phoenix Rom 16, after flashing phoenix rom 16, my phone stuck in bootloop and cannot enter into recovery mod. So I decided to download stock 4.3 N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar from sammobile and flash it using odin. Even after that, my phone is still stuck on the second samsung logo. So I tried to flash pit file and the stock rom from before, still no result at all...
My download screen now shows:
Odin Mode
Product Name : GT N7100
Custom Binary Download : Yes (13 Counts)
Custom Binary : Samsung Official
System Status : Custom
Knox Warranty Void : 1
AP SWREV : A2
I tried to flash 4.1.2 Rom using Odin but It cannot flash the sboot.bin and shows on the download mode screen unsupported version, Tried to downgrade my bootloader from 4.3 with dr ketan MJ5BLPatch.tar and get the same result as the 4.1.2 rom. I can now access recovery and download mode, but cannot successfully boot, tried to flash phoenix rom v15, still failed
Please help, I'm Stuck... :crying:
Click to expand...
Click to collapse
Bump... Please Help...
shinobu91 said:
Help, my phone is now stuck on the second samsung logo and wont boot to desktop.
I was on Phoenix Rom v15.7 and upgrading to Phoenix Rom 16, after flashing phoenix rom 16, my phone stuck in bootloop and cannot enter into recovery mod. So I decided to download stock 4.3 N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar from sammobile and flash it using odin. Even after that, my phone is still stuck on the second samsung logo. So I tried to flash pit file and the stock rom from before, still no result at all...
My download screen now shows:
Odin Mode
Product Name : GT N7100
Custom Binary Download : Yes (13 Counts)
Custom Binary : Samsung Official
System Status : Custom
Knox Warranty Void : 1
AP SWREV : A2
I tried to flash 4.1.2 Rom using Odin but It cannot flash the sboot.bin and shows on the download mode screen unsupported version, Tried to downgrade my bootloader from 4.3 with dr ketan MJ5BLPatch.tar and get the same result as the 4.1.2 rom. I can now access recovery and download mode, but cannot successfully boot, tried to flash phoenix rom v15, still failed
Please help, I'm Stuck... :crying:
Click to expand...
Click to collapse
Hello..
You can try flash philz_touch_5.15.0-n7100.tar.md5 via odin pda and reboot..if still stuck at samsung logo boot into recovery and wipe data/factory reset and reboot..
shinobu91 said:
Help, my phone is now stuck on the second samsung logo and wont boot to desktop.
I was on Phoenix Rom v15.7 and upgrading to Phoenix Rom 16, after flashing phoenix rom 16, my phone stuck in bootloop and cannot enter into recovery mod. So I decided to download stock 4.3 N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar from sammobile and flash it using odin. Even after that, my phone is still stuck on the second samsung logo. So I tried to flash pit file and the stock rom from before, still no result at all...
My download screen now shows:
Odin Mode
Product Name : GT N7100
Custom Binary Download : Yes (13 Counts)
Custom Binary : Samsung Official
System Status : Custom
Knox Warranty Void : 1
AP SWREV : A2
I tried to flash 4.1.2 Rom using Odin but It cannot flash the sboot.bin and shows on the download mode screen unsupported version, Tried to downgrade my bootloader from 4.3 with dr ketan MJ5BLPatch.tar and get the same result as the 4.1.2 rom. I can now access recovery and download mode, but cannot successfully boot, tried to flash phoenix rom v15, still failed
Please help, I'm Stuck... :crying:
Click to expand...
Click to collapse
I am sure you must have selected too many mods in Aroma while installing Phoenix and you must have flashed v16 without wiping. This is the reason behind your problem.
How to fix-
1.Flash philz touch 5.15.0
2.Select wipe(second option) from philz recovery and choose "Clean to flash a new rom"
3.Now flash any ROM of your choice and reboot (do not fix root when prompted)
I guarantee your phone will boot now. Now Cheers
Sent from my GT-N7100 using XDA Premium 4 mobile app
If you'd follow the instructions correctly there's no reason you'll be stuck..i flashed 16.0 twice but everything was ok.follow the advices given to you and try again..:good:
P.S..can someone give me idea to install sony package in note 2 coz i didn't found on the Phoenix V16 aroma?i tried flashed the 4.3 sony package zip downloaded from codexc but encountered keypad stopped,media stopped & others..
issues with downgrading at&t galaxy s3 from 4.3 to 4.1.1
I flash these all the time, but I think this is the first time from 4.3, is this the issue?
I tried odin 1.85 and 3.04 3.09 with same error on odin screen of the phone, error is as follows:
( SW REV CHECK: FAIL FUSED 2 > BINARY 0 )
I can still boot up to 4.3 normally, just cant flash back
Any one know how to fix this?
my odin screen also shows
custom binary download: no
currenty binary : samsung official
bootloader ap swrev: 2
qualcomm secureboot:enable
Once you have the 4.3 bootloader on your phone, you cannot downgrade it. You can only downgrade the ROM, not the bootloader.
I have an SGH-1747 on AT&T. I already had the OTA 4.3 update on my phone and I wanted to simply wipe all of the apps off so it was a fresh 4.3 install as it was running slow. I went into the settings and did a factory wipe thinking that would wipe it back to original 4.3 but when it rebooted it hung on the AT&T screen.
I went into Recovery mode and wiped everything to factory refresh from there hoping that would fix it and it made it worse. Now when I reboot i simply get the Firmware upgrade encountered an issue and it asks me to use Kies to go into recovery mode. I did that multiple times and it never worked. Simply kept failing.
I am able to get into Download Mode but I can't seem to find a ODIN version of the 4.3 that I can try to flash it back to. I would love to go back to a 4.2 version if that would work but I stopped before I made it worse. In download mode it says
ODIN MODE
PRODUCT NAME SGH-I747
CUSTOM BINARY DOWNLOAD: YES (2 COUNTS) - Early on with 4.1 i had flash up to 4.2 using ODIN but i have on official AT&T release since
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOM SECUREBOOT: ENABLE
WARRANTY BIT = 1
BOOTLOADER RP SWREV: 2
Any advice out there? I am thinking I soft bricked my phone but I am not sure?
PLEASE HELP!
There is no stock 4.3 AT&T ROM that can be flashed via Odin. You cannot downgrade the bootloader to an older version.
You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
audit13 said:
There is no stock 4.3 AT&T ROM that can be flashed via Odin. You cannot downgrade the bootloader to an older version.
You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
Thanks for the info. I actually got it fixed by giving in and going to best buy and the Samsung guys actually were able to flash it to a fresh 4.3 image. They knew it had a non factory image on it in the past based on the counter but they still did it. I'm all fixed now which was awesome.
hello, I bought this i747 in its current condition. I know nothing about its history.
when I power it on it goes to the phone, !, comp screen saying firmware upgrade encounter an issue, select recovery mode in kies.
in the top corner it says:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: ENABLE
WARRANTY BITS: 0
BOOTLOADER RP SWREV: 2
Now when I connect to kies and run emergency firmware everything loads on kies, then gives an error, and
underneath BOOTLOADER RP SWREV: 2 it says: SW REV CHECK FAIL: Fused 2 > Binary 0 in red.
If this phone fixable? Any help would be appreciated.
mtsosie said:
hello, I bought this i747 in its current condition. I know nothing about its history.
when I power it on it goes to the phone, !, comp screen saying firmware upgrade encounter an issue, select recovery mode in kies.
in the top corner it says:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: ENABLE
WARRANTY BITS: 0
BOOTLOADER RP SWREV: 2
Now when I connect to kies and run emergency firmware everything loads on kies, then gives an error, and
underneath BOOTLOADER RP SWREV: 2 it says: SW REV CHECK FAIL: Fused 2 > Binary 0 in red.
If this phone fixable? Any help would be appreciated.
Click to expand...
Click to collapse
Did you say it was recognized in Kies but firmware recovery failed? If so, and you were using Kies (not Kies 3), we may assume the last system update was not older than Android 4.1.1. I'll suggest you try these steps (in that order),i.e. if one doesn't work, try the next step ..
1. Try booting into recovery mode and doing a hard wipe/reset
2. Download the correct stock image from the thread below and flash via Odin. If you need help with flashing via Odin, please let me know
http://forum.xda-developers.com/showthread.php?t=1739426 or visit Sammobile.com to download the correct stock image.
3. Open Kies. Do not connect the phone yet. Go to Tools => Firmware Upgrade and Initialization. Enter your phone model name (SGH-I747)=>OK and serial number. Check device information inside the battery compartment. Wait for firmware download to complete and you are prompted to connect the phone and follow the rest of the on-screen instructions.
4. Contact the vendor to find out what they did wrong and see what refund options you have
Ok, so I also wasn't able to get into recovery.
I decided to flash cwm via odin. After it flashed the phone rebooted and turned on normally. I have turned it on and off like 5 times and everytime it boots normal.....But, there is still a problem... baseband version is Unknown and there is no IMEI Number.
Larry2999 said:
Did you say it was recognized in Kies but firmware recovery failed? If so, and you were using Kies (not Kies 3), we may assume the last system update was not older than Android 4.1.1. I'll suggest you try these steps (in that order),i.e. if one doesn't work, try the next step ..
1. Try booting into recovery mode and doing a hard wipe/reset
2. Download the correct stock image from the thread below and flash via Odin. If you need help with flashing via Odin, please let me know
http://forum.xda-developers.com/showthread.php?t=1739426 or visit Sammobile.com to download the correct stock image.
3. Open Kies. Do not connect the phone yet. Go to Tools => Firmware Upgrade and Initialization. Enter your phone model name (SGH-I747)=>OK and serial number. Check device information inside the battery compartment. Wait for firmware download to complete and you are prompted to connect the phone and follow the rest of the on-screen instructions.
4. Contact the vendor to find out what they did wrong and see what refund options you have
Click to expand...
Click to collapse
hi, yes those were the steps I tried and the result was fail. Now that I can boot it, it shows its 4.3 but no baseband and no imei.
mtsosie said:
hi, yes those were the steps I tried and the result was fail. Now that I can boot it, it shows its 4.3 but no baseband and no imei.
Click to expand...
Click to collapse
Oh, it's 4.3. Perhaps even better because you may be able to flash the 4.3 restore image. Your baseband/modem is corrupt or missing which is why it's showing the no baseband message.
Please see the thread below for the complete 4.3 stock restore image. Download the stock restore image and flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=2658486
Or you may just flash the 4.3 JB modem via custom recovery since you have custom recovery working. The modem zip can be found here ...
http://www.androidfilehost.com/?fid=23212708291681456
Larry2999 said:
Oh, it's 4.3. Perhaps even better because you may be able to flash the 4.3 restore image. Your baseband/modem is corrupt or missing which is why it's showing the no baseband message.
Please see the thread below for the complete 4.3 stock restore image. Download the stock restore image and flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=2658486
Or you may just flash the 4.3 JB modem via custom recovery since you have custom recovery working. The modem zip can be found here ...
http://www.androidfilehost.com/?fid=23212708291681456
Click to expand...
Click to collapse
:good: right on. you rock man. I flashed the modem and it works great now. thanks again.
mtsosie said:
:good: right on. you rock man. I flashed the modem and it works great now. thanks again.
Click to expand...
Click to collapse
You are most welcome. Glad to know it's now working.
hey guys am in trouble
Odin Refuse to flash
I747 warranty bit :1
bootloader rp swrev 2
SW rev check fail fused 2
Phone stuck on kies firmware upgrade encounterd
I Cant get 4.3 back again or downgrade to any older version
plz help me :'(
here is two screen shot in download mode while odin error
and in normal mode when i try 2 open
dark_darkness said:
hey guys am in trouble
Odin Refuse to flash
I747 warranty bit :1
bootloader rp swrev 2
SW rev check fail fused 2
Phone stuck on kies firmware upgrade encounterd
I Cant get 4.3 back again or downgrade to any older version
plz help me :'(
here is two screen shot in download mode while odin error
and in normal mode when i try 2 open
Click to expand...
Click to collapse
Can you try flashing custom recovery via Odin and then using custom recovery to do a stock restore to 4.3 following the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
can u share a link?
Larry2999 said:
Can you try flashing custom recovery via Odin and then using custom recovery to do a stock restore to 4.3 following the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
i've tried many custom roms
start flashing will and end with bug error at the end coz of warranty
can u share me a link for firmware tested ?
dark_darkness said:
i've tried many custom roms
start flashing will and end with bug error at the end coz of warranty
can u share me a link for firmware tested ?
Click to expand...
Click to collapse
I suggested custom recovery and not custom ROM. The idea is to get your phone back in working order first. Flashing a complete stock restore image should do it. Please refer to the thread I forwarded earlier. You should be able to flash custom recovery (like CWM or TWRP) to your phone via Odin and then use the custom recovery to flash the stock restore image.
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
where is home csc,there is only 4 but must have 5 to flash...
imenko79 said:
where is home csc,there is only 4 but must have 5 to flash...
Click to expand...
Click to collapse
It's same as csc, if you flash home csc it doesn't wipe. If you flash only CSC, it wipes your phone. You select one of them, you can't flash both.
And as you see, I succesfully flashed an older firmware. The problem is that odin can't flash the newest firmware.
y.erenbektas said:
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
Click to expand...
Click to collapse
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
dezborders said:
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
Click to expand...
Click to collapse
I'll give this next weekend. Thanks ^^