Hi,
i flashed my phone with LineageOS but forgot to sign out of my mi account. Now it is not possible to remove my mi account through the official link because this message pops up: Find device hasn't been turned off for some devices. I also tried it on i.mi.com but i can just delete my device and when i sign in again it is still there. Is there a way to remove my mi account?
when i tried to add mi Account in Mi Unlock Status in Developer Option it shows
"reset you device or erase system data"
something like that
can factory data reset solve this problem or not.
what i have to do please help.
Log out of your mi account and then try adding it from the mi unlock status screen. This worked for me
I found a RN8P and is blocked by Mi account, I waited for the go owner to call but nothing. Is there a way I can unblock it so I can reach the owner? I don’t want to spend money on it since it won’t be for me. Any thoughts,ideas, advices?
Here is the instruction, but it is in Russian
Xiaomi Redmi Note 8 Pro - Прошивки MIUI - 4PDA
Xiaomi Redmi Note 8 Pro - Прошивки MIUI
4pda.ru
I had the same Problem, i buyed a RN8P where the Seller has forgotten his Password from his MI Account. One Day i wiped all Data because the Phone was messed up with unnecessary Programms and Data and after rebooting there comes a black screen and "This Device is locked".
After Weeks of reseaching over the inet and trying multiple Ways and Account Remover, Unlocker, etc. i have found a Solution! You can remove the MI Account from your RN8P by using this Guide to flash a new firmware following this Guide:
UNBRICK BEGONIA NO AUTH
Requirements: 1) PC 2) Internet 3) Patience Windows Method: • Download this file - Click-Here (Download from Telegram) (https://mega.nz/file/A4YSEZaA#0Jk3_jH8uVtMnATciVRtWw2r_SH0NPLq4P6SrGNuwJQ)
telegra.ph
Note that is very importand that you do that without connection to the internet! You have to do some additional steps....
First you have to format 3 Partitions on the Phone: Go to the "Format" Area of SP Flash Tool, select "Manual Format" and type
(to format the FRP Partition) Begin Adress "0x5888000", Format Lengh "0x100000"
(to format the MI Account Partition) Begin Adress "0xe188000" Format Lengh "0x4678000"
(to format the userdata Patition) Begin Adress "0x1d2800000" Adress Lengh "0x30000000"
You have to run the "BROM Tool" everytime before you can do one Action with the SP Flash Tool, means before each Format or before each flash. The SP Flash Tool will crash after formatting each Partition but thats not bad, just restart, run the BROM Tool and continue. After you have formatted these 3 partitions you can flash a firmware of your choice.
After flashing turn your phone on (dont insert a SIM Card or connect it with Wlan to the Internet!), go to the main options and disable any automatic update you can find! Such as automatic Firmware or App Updates. You have to deinstall or deactivate every original Xiaumi App just to be sure. I also deactivated some Certificates from Companies but you should be very careful with this.
Why you have to deactivate those Xiaomi Apps and automatic Updates?
The Xiaomi FRP Protection is Server hosted, so when you have disabeld the MI Account FRP Protection with the Steps above, some Apps on your Phone could call Xiaomi Servers and automatically sends the Serial Number (not the IMEI, i mean the Serial Number you see with the fastboot command "fastboot devices") home and the Xiaomi Servers tell back that its a "blacklistet Device" and it will go in locked state again. So you have to do everything again.
I hope i could help some of you guys who have the same problem like me. Unforgently xiaomi support doesn't help people (regardless wich problem). Please excuse my English, i'm not a native speaker, if you have further questions or other issues, please feel free to ask!
If you have Problems tonuse the "BROM-Tool" please note that you have to install TWO Device filters for mediatek devices!
hi i tried this and i downgrade it bypas mi account and enter the systemand seems to be ok but when connect internet and phone licking again in mi account. what can i do to?
i've been trying to do this thing for like 4 hours idk what to do anymore pls help
do you have a working data connection? sms too? try changing sim slot
rickymanx said:
do you have a working data connection? sms too? try changing sim slot
Click to expand...
Click to collapse
ye I do I'll try later
rickymanx said:
do you have a working data connection? sms too? try changing sim slot
Click to expand...
Click to collapse
didn't work
I have the same result, but assuming the device is already verified and secure (as stated by the closed lock picture) I think it's impossible to add a second account - or the same phone two times - to the verification request by pressing "add account and device" button.
So probably it's just a matter of bad translation in the popup, where it says check network and try again
bozinsky73 said:
I have the same result, but assuming the device is already verified and secure (as stated by the closed lock picture) I think it's impossible to add a second account - or the same phone two times - to the verification request by pressing "add account and device" button.
So probably it's just a matter of bad translation in the popup, where it says check network and try again
Click to expand...
Click to collapse
i never got to add this phone to the mi account like bind it or something idk
Akash1338 said:
i never got to add this phone to the mi account like bind it or something idk
Click to expand...
Click to collapse
Your account is already logged and you already have secure locked device.
I'm telling we both have this message because of this.
You logged to your MIUI account when you run first installation and you had to connect to MIUI server for security check
bozinsky73 said:
Your account is already logged and you already have secure locked device.
I'm telling we both have this message because of this.
You logged to your MIUI account when you run first installation and you had to connect to MIUI server for security check
Click to expand...
Click to collapse
no i didnt have to connect it
i'm having the same issue too on a redmi 9, everything is fine mi accoint and i have mobile data on but still cant add my account
Same issue here
found the fix from some guy on xiaomi.eu forum
use this vpn https://play.google.com/store/apps/details?id=com.shuttlevpn.free.proxy.gaming
Steps to fix:
1. Change Region Settings to Singapore (Settings App -> Additional Settings -> Region -> Singapore)
2. Use a Singapore VPN (Don't disconnect the VPN till the end.)
3. Log out from your Mi Account
4. Click on create an account, make sure your VPN is still connected and choose Country/Region to Singapore and create a new mi account
5. Go to Mi Unlock Status and it should work now
So it's most likely a case of incorrect translation in the popup where it reads "check network and try again."
Akash1338 said:
found the fix from some guy on xiaomi.eu forum
use this vpn https://play.google.com/store/apps/details?id=com.shuttlevpn.free.proxy.gaming
Steps to fix:
1. Change Region Settings to Singapore (Settings App -> Additional Settings -> Region -> Singapore)
2. Use a Singapore VPN (Don't disconnect the VPN till the end.)
3. Log out from your Mi Account
4. Click on create an account, make sure your VPN is still connected and choose Country/Region to Singapore and create a new mi account
5. Go to Mi Unlock Status and it should work now
Click to expand...
Click to collapse
Wait.. point n.3 means you have to log out from your account, so you can log in again but on a VPN ???
u don't log in into the same account, u create a new one using the VPN (don't turn it off during the process) on the Singapore region
So I did not get the original request.... my fault.
But the OP pictures shows that the phone is locked and secured, being logged to the account that owns the phone. So, what's the reason to add another account?
I get the same message. But did find a forum where someone said it will still work, just press the button and connect it with your PC in Fastboot with mi unlock tool.
Tried it, "you have to wait 168h..."
Seems to work, tho.
i have both OEM unlocking on, and usb debugging.
i go to the Mi unlock status and add my account as shown at the picture .
but afterwards when i go to the mi unlock up on my phone it stops at 99% and proceeds to error , while telling me to add my account to MIUI's settings .
i try with new mi account ,rebooting the phone . everything that i can think of , but i cant resolve the issue .... (On settingsMI account i can see my device)
i am so many days trying to figure out and xiaomi support on my country doesnt help.... plz give me your lights