Develop Bugs

Anyone had flashed xposed for Robin?

I have a problem while I tried to flash xposed on my nextbit robin(Android 6.0, official software version 00WW_1_19E) .
The following is my step:
1. Restore system
2. Root
3. install busybox and XposedInstaller_3.0_alpha4.apk
4. Flash xposed-v80-sdk23-arm64.zip with TRWP twrp-3.0.0-0-ether
When I was flash xposed, the screen showed:
Updating partition details...
...done
Full SElinux support is present
MTP Enableed
Installing zip file '/sdcard/APK/xposed-v80-sdk23-arm64.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
******************************
Xposed framework installer zip
******************************
- Mounting /system and /vendor read-write
- Checking environment
Xposed version: 80
- Placing files
gzip: short write
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/APK/xposed-v80-sdk23-arm64.zip'
Updating partition details...
...done
Sometimes I was success to flash xposed but my robin is stop on the starting screen....
And I need to restore robin again to fix it
Does xposed support for Robin yet ?
Or I was wrong in step?

After flashing xposed wipe cache and davlik.. worked for me.

varun.gid said:
After flashing xposed wipe cache and davlik.. worked for me.
Click to expand...
Click to collapse
Could you please provide zip file of xposed and flash step?
What's your devices software version ?

I just used the v80 file from xposed thread. You need to be rooted first.
Boot in recovery, flash zip, wipe cache and Boot up. Install xposed installer apk Done!
Same Software as yours.

varun.gid said:
I just used the v80 file from xposed thread. You need to be rooted first.
Boot in recovery, flash zip, wipe cache and Boot up. Install xposed installer apk Done!
Same Software as yours.
Click to expand...
Click to collapse
It is not working on my devise by this way.
Would you please upload your rom backup which is rooted and installed xposed ?
Thanks a lot !!!

I was success and following step can fix it in my case,
1. Wipe device
2. Restore hole ROM that deadman96385 provided
3. Restart system until you can see the android home page
4. Reboot to recovery, root and wipe cache then reboot device
5. Check the SuperSU is working or not. If yes, go next step
6. Reboot to recovery, restore the boot and system (without system image) then install xposed v80 and wipe cache
7. Reboot device and enjoy it ← I was stock on boot screen in this step, so I get into the recovery and restore the "boot" only.

Posting here in case anyone's had the same experience.
Tried flashing Xposed twice now. Both times everything seems fine, but then I try opening a few system apps and I get force closes everywhere. Namely:
- Calculator
- Contacts
- Downloads
- Bluetooth (specifically toggling it from quick settings)
It's very frustrating. Tried wiping dalvik/cache again, force stopping, clearing app data for the problem apps etc. No luck.
With the latest update I used the system images to flash back to stock and start again for another try and now I'm having the exact same problem yet again. Has anybody else seen the same or knows how to fix this?
Note: Everything works perfectly fine apart from these few system apps which break. Xposed functions as it should.

Nickamina said:
Posting here in case anyone's had the same experience.
Tried flashing Xposed twice now. Both times everything seems fine, but then I try opening a few system apps and I get force closes everywhere. Namely:
- Calculator
- Contacts
- Downloads
- Bluetooth (specifically toggling it from quick settings)
It's very frustrating. Tried wiping dalvik/cache again, force stopping, clearing app data for the problem apps etc. No luck.
With the latest update I used the system images to flash back to stock and start again for another try and now I'm having the exact same problem yet again. Has anybody else seen the same or knows how to fix this?
Note: Everything works perfectly fine apart from these few system apps which break. Xposed functions as it should.
Click to expand...
Click to collapse
Which modules are you currently running on Xposed? I have Gravity Box, XHangouts, YT BG Playback, and Battery Home icon and haven't experienced any force closes so far. Any other root apps you're running?

Nickamina said:
Posting here in case anyone's had the same experience.
Tried flashing Xposed twice now. Both times everything seems fine, but then I try opening a few system apps and I get force closes everywhere. Namely:
- Calculator
- Contacts
- Downloads
- Bluetooth (specifically toggling it from quick settings)
It's very frustrating. Tried wiping dalvik/cache again, force stopping, clearing app data for the problem apps etc. No luck.
With the latest update I used the system images to flash back to stock and start again for another try and now I'm having the exact same problem yet again. Has anybody else seen the same or knows how to fix this?
Note: Everything works perfectly fine apart from these few system apps which break. Xposed functions as it should.
Click to expand...
Click to collapse
I am having the same issues as you... Stinks...
---------- Post added at 05:50 AM ---------- Previous post was at 05:14 AM ----------
Nickamina said:
Posting here in case anyone's had the same experience.
Tried flashing Xposed twice now. Both times everything seems fine, but then I try opening a few system apps and I get force closes everywhere. Namely:
- Calculator
- Contacts
- Downloads
- Bluetooth (specifically toggling it from quick settings)
It's very frustrating. Tried wiping dalvik/cache again, force stopping, clearing app data for the problem apps etc. No luck.
With the latest update I used the system images to flash back to stock and start again for another try and now I'm having the exact same problem yet again. Has anybody else seen the same or knows how to fix this?
Note: Everything works perfectly fine apart from these few system apps which break. Xposed functions as it should.
Click to expand...
Click to collapse
So I fixed mine. This is what I did.
Used the Xposed uninstaller to uninstall Xposed.
Rebooted.
Installed Xposed APK
Enabled "Enable su during boot" in SuperSU
Reinstalled Xposed framework (I am using v81 arm64)
Rebooted and all apps work. Mine took a very long time to rebuild all android apps but now it works...

dustintinsley said:
I am having the same issues as you... Stinks...
---------- Post added at 05:50 AM ---------- Previous post was at 05:14 AM ----------
So I fixed mine. This is what I did.
Used the Xposed uninstaller to uninstall Xposed.
Rebooted.
Installed Xposed APK
Enabled "Enable su during boot" in SuperSU
Reinstalled Xposed framework (I am using v81 arm64)
Rebooted and all apps work. Mine took a very long time to rebuild all android apps but now it works...
Click to expand...
Click to collapse
Funny thing! Finally did a full wipe of my device because not being able to use TWRP for anything (i.e. couldn't even remove an old backup) was getting to me. So I actually had to uninstall xposed once I got everything running in order to get into snapchat.
Upon reinstallation, the two apps that refused to work were calculator and downloads (both crashing upon immediate launch). So to look into this problem, I didn't wipe cache/dalvik again which could be a major problem to this. I'll update as my applications get 'optimized' and will report back once all is said and done. For some reason I have a feeling this has a lot to do with not wiping the cache(s) as it leaves behind some old files. Considering the fact 99% of the time for flashing you should wipe the stuff anyways, I think this may be the problem. If this doesn't work I'll follow your response you did!

Uninstall Root on Cm13?

I want to use the system less root so I can play Pokémon Go. Is there a way to remove root or do I have to be running a stock rom? I'm using the latest nightly of the regular Cyanogen Cm13.
Thanks

Isn't root enabled via settings? Maybe turn it off in the settings or reflash and don't enable root?

I tried that but the system is still seen as rooted
Sent from my SGH-T999 using XDA-Developers mobile app

Shack70 said:
I want to use the system less root so I can play Pokémon Go. Is there a way to remove root or do I have to be running a stock rom? I'm using the latest nightly of the regular Cyanogen Cm13.
Thanks
Click to expand...
Click to collapse
in superSU app , under settings is a clickable box for "full unroot". tried that?
"err on the side of kindness"

mrrocketdog said:
in superSU app , under settings is a clickable box for "full unroot". tried that?
"err on the side of kindness"
Click to expand...
Click to collapse
I can't get the supersu app to work. It wants to update and fails update. Updating through twrp creates a boot loop. Good idea though, thanks.
Sent from my SGH-T999 using XDA-Developers mobile app

Shack70 said:
I can't get the supersu app to work. It wants to update and fails update. Updating through twrp creates a boot loop. Good idea though, thanks.
Sent from my SGH-T999 using XDA-Developers mobile app
Click to expand...
Click to collapse
hmmmmm well just for something to try , how about reflasing superSU then see if it will open. idk. just something to try
"err on the side of kindness"

CM13 has it's own baked-in implementation of ClockWorkMod's SuperUser, not SuperSU. You can install SuperSU, but it will conflict. You'll first need to delete /system/bin/su and /system/xbin/su, then you can "try" installing SuperSU, SUHide, etc..
1. install the latest version of TWRP for your device
2. boot into recovery and install SuperSU v2.78 SR1
-reboot system. open SuperSU and setup as normal
3. boot into recovery and install SUHide v0.54
-reboot system. open an app that require root to make sure your root is functioning
-try Pokemon Go. It should work fine
Do you need some sort of GPS spoof? You'll need Systemless XPosed and a good module
4. boot into recovery and install Xposed v86.2 - Universal Systemless (make sure you select 86.2 - you DO NOT need Magisk)
reboot system.
5. install Material Design Xposed Installer APK
-run XPosed Installer. it should show you are using 86.2 systemless
-click top left button and select download. search for a module called "Snorlax" and install the most recent version.
-this will hide your mock locations setting as well as show IV's, movesets, etc. of any Pokemon you encounter. it's all client side so no worries about bans!
-reboot system
-Test Pokemon Go. You should have no problems!
6. Need a GPS spoofing app? I use Fake GPS (well worth the $2.99). It allows you to pin favorite locations (I bounce quickly between spots where I can hit multiple lured PokeStops at once), and has settings to randomly move within a radius at whatever intervals and speed. They also have a GPS Joystick and Routes app that I have not yet tested since they don't offer a trial or free version. I'll update on that if they do offer a trial.
I have fresh installed CM13 on a Nexus 5, following the instructions above for systemless root + xposed. Pokemon Go v39.1 works without issue while spoofing GPS.
**UPDATE 10/7/2016 ** - edited to use updated suhide v0.54

FuNKSioN said:
CM13 has it's own baked-in implementation of ClockWorkMod's SuperUser, not SuperSU. You can install SuperSU, but it will conflict. You'll first need to delete /system/bin/su and /system/xbin/su, then you can "try" installing SuperSU, SUHide, etc..
1. install the latest version of TWRP for your device
2. boot into recovery and install SuperSU v2.78 SR1
-reboot system. open SuperSU and setup as normal
3. boot into recovery and install suhide v0.53
-reboot system. open an app that require root to make sure your root is functioning
-try Pokemon Go. It should work fine
Do you need some sort of GPS spoof? You'll need Systemless XPosed and a good module
4. boot into recovery and install Xposed v86.2 - Universal Systemless (make sure you select 86.2 - you DO NOT need Magisk)
reboot system.
5. install Material Design Xposed Installer APK
-run XPosed Installer. it should show you are using 86.2 systemless
-click top left button and select download. search for a module called "Snorlax" and install the most recent version.
-this will spoof your mock locations setting as well as show IV's, movesets, etc. of any Pokemon you encounter. it's all client side so no worries about bans!
-reboot system
Test Pokemon Go. You should have no problems!
***UPDATE***
I have just fresh installed CM13 on a Nexus 5, following the instructions above for systemless root + xposed. Pokemon Go v39.1 works without issue while spoofing GPS.
Click to expand...
Click to collapse
I deleted all the support files but Pokémon ends telling it's unable to log me in. Many users are reporting this error. It might just be my phone, the s3 is kinda old.

Shack70 said:
I deleted all the support files but Pokémon ends telling it's unable to log me in. Many users are reporting this error. It might just be my phone, the s3 is kinda old.
Click to expand...
Click to collapse
Hmm.. For ****s and giggles, I'll pull out an old S3 and give it a go. Will report back soon.

FuNKSioN said:
Hmm.. For ****s and giggles, I'll pull out an old S3 and give it a go. Will report back soon.
Click to expand...
Click to collapse
Wow! Thanks I appreciate it.

Shack70 said:
Wow! Thanks I appreciate it.
Click to expand...
Click to collapse
Sorry took so long. This phone is slow as ballz! Everything appears to be working correctly though. I have Pokemon Go 39.1 installed (had to use apkmirror to install since it wouldn't let me from the Play Store on the S3), and am using Snorlax module to hide mock locations. I'm also using Fake Gps to spoof location.
I'd say it should work for you as well. What modules are you using? If you don't care about anything on your phone, wipe everything from recovery. Then under advanced, adb sideload CM13 and GApps Nano from opengapps.org (ARM/6.0/nano). Restart system and follow all the steps from there after you have the initial phone setup done.

FuNKSioN said:
Sorry took so long. This phone is slow as ballz! Everything appears to be working correctly though. I have Pokemon Go 39.1 installed (had to use apkmirror to install since it wouldn't let me from the Play Store on the S3), and am using Snorlax module to hide mock locations. I'm also using Fake Gps to spoof location.
I'd say it should work for you as well. What modules are you using? If you don't care about anything on your phone, wipe everything from recovery. Then under advanced, adb sideload CM13 and GApps Nano from opengapps.org (ARM/6.0/nano). Restart system and follow all the steps from there after you have the initial phone setup done.
Click to expand...
Click to collapse
Thanks for your help. I updated yo the newest nightly build, did a full factory reset and deleted the 2 su files. After rebooting i re-downloaded the newest version of Pokémon and installed it. Game is working fine.
I don't use root much so I'll see how it goes without root and if I need root i can put the su files back(I made copies and put them in Dropbox) or try superSU/hideSU.
I know the s3 is slow but I'm putting off an upgrade until i have to upgrade. Until i upgrade I won't really realize how slow my phone is
Sent from my SGH-T999 using XDA-Developers mobile app

Going forward, I don't think the CM baked-in SuperUser is going to cut it. At least not the version in CM13. The specific versions of SuperSU + suhide I linked seem to pass all current checks though. So if you want root, go ahead and use them.

FuNKSioN said:
Going forward, I don't think the CM baked-in SuperUser is going to cut it. At least not the version in CM13. The specific versions of SuperSU + suhide I linked seem to pass all current checks though. So if you want root, go ahead and use them.
Click to expand...
Click to collapse
Yeah i get this is a temporary solution. Thanks for all your help. You've really gone above and beyond
Sent from my SGH-T999 using XDA-Developers mobile app

no problem man!

Thanks!
FuNKSioN said:
no problem man!
Click to expand...
Click to collapse
just wanted to chime in and say my own SGH-T999 is now running PG again, thanks to you FuNKSioN - so, thank you sir!!! wasted a LOT of time trying other solutions (mainly Magisk) with no luck, so i was pretty damned happy when your steps worked. first time i forgot to rename/delete the two su files, second time i did it immediately after flashing CM13 & GApps using ADB and then everything was fine. you rock!!! :victory:
and also, yeah - until Shack70 and i get a new phone, we have no idea what "slow as ballz" is! i will say, the S3 may be relatively slow but i have two backup batteries that take up very little space and are very easy to swap in and out.

romehu2 said:
just wanted to chime in and say my own SGH-T999 is now running PG again, thanks to you FuNKSioN - so, thank you sir!!! wasted a LOT of time trying other solutions (mainly Magisk) with no luck, so i was pretty damned happy when your steps worked. first time i forgot to rename/delete the two su files, second time i did it immediately after flashing CM13 & GApps using ADB and then everything was fine. you rock!!! :victory:
and also, yeah - until Shack70 and i get a new phone, we have no idea what "slow as ballz" is! i will say, the S3 may be relatively slow but i have two backup batteries that take up very little space and are very easy to swap in and out.
Click to expand...
Click to collapse
Glad to help. I was in the same boat: so much info in all directions and none of it seemed to work. I keep up with ChainFire's G+ account. He had a few posts linked directly back to XDA. Those few posts had everything needed. I just put it in simple steps. All thanks to him really

Sigh
And now SafetyNet is failing and PoGo won't log me in. Is this really worth it?

romehu2 said:
And now SafetyNet is failing and PoGo won't log me in. Is this really worth it?
Click to expand...
Click to collapse
reflashed CM13 + GApps, used ADB to rename system/xbin/su & system/bin/su to /su-off, and SafetyNet is happy (and thus, so is PoGo). but now, of course, phone isn't rooted.
---------- Post added at 05:18 AM ---------- Previous post was at 05:05 AM ----------
on the plus side, CM13 comes with File Manager which allowed me, without root, to install the v39.1 PoGo apk that I downloaded last week.

Sit back and wait for an SU update... It's only been a hot minute.

[ROM][6.0][VIBE] VibeUI v3.5 1631 MULTILANGUAGE (Update 1631.2) by sixito007

Code:
I am not responsible for bricked devices, dead SD cards.
YOU are choosing to make these modificiations!!!!!
I am not Developer, i'm just post share from needrom by user sixito007
This is a port from K50-T5 (Lenovo K3 Note)
Installation:
Flash zip file on TWRP Recovery:
Wipe Data, Wipe Cache, Wipe Dalvik Cache, Wipe System.
Install ROM zip
Installing Complet and Reboot.
※Please make a backup of your device before installing or updating ROM
Changes:
DOLBY ATMOS™
SU
ROOT EXPLORER,
MIRAVISION™
SONY MUSIC PLAYER ™
Port Version Information
K50-T5_USR_DEV1631_7.165.1_1607250221_mp1V2.39_CN
Originally posted Here (Needrom)
Downloads
Update-OTA Installer.zip (OTA Updater Official application) https://drive.google.com/file/d/0B4DceN8HABzoSXNJcmQ1NEJYNGc/view?usp=sharing
ROM v2 https://drive.google.com/file/d/0B4DceN8HABzoSkcxVF9wZEF1cDg/view?usp=sharing
TWRP AIO ROW https://drive.google.com/file/d/0B4DceN8HABzod3FPcDNidU5iQjQ/view?usp=sharing
Update 1631.2 https://drive.google.com/file/d/0B_rwx9TBvDU9Wnk1YWs0ODBua2s/view?usp=sharing
Error is fixed

Tried. waited for 25 mts, still remains in boot loop.

cvpillai said:
Tried. waited for 25 mts, still remains in boot loop.
Click to expand...
Click to collapse
thats sad(
How you tried to install?

I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:

cvpillai said:
I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:
Click to expand...
Click to collapse
Added twrp. download from first post.

cvpillai said:
I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:
Click to expand...
Click to collapse
LINK UPDATED, Error is Fixed.

Tried. Some improvement is there. It goes up to Welcome screen, waits for Language option, remains there after choosing the language - indefinitely.

Witch kernel is used in this ROM ? Thanks

Is there any way to remove those ugly grey icon backgrounds?
Like in the first post, in the second screenshot, it can be seen that Titanium backup has a grey background
Similarly, pre-included apps like syncit has no background.
This difference of icons makes the phone look quite ugly.

Please tell me what's working wrong, or not working at all...
Added update v3.5 1631.2.
-added more Lenovo apps
-added full slovak and czech language
-added Dolby Atmos™ on Settings
-added Update system on Settings/Device info
- more free RAM memory cca.1300MB

Installed successfully. So far only Bluetooth problem detected. Shall get back after some use.:good::good:

Firefox and other apps won't open. They crash as soon as tapped. And Bluetooth isn't working.

nvidiageek said:
Firefox and other apps won't open. They crash as soon as tapped. And Bluetooth isn't working.
Click to expand...
Click to collapse
you need to install rom first, then update 1631.2, and tap "format dalvik&cache" when install ends.
after that reboot - and system works fine. only bluetooth can crush at the first boot.

Dumaxa said:
you need to install rom first, then update 1631.2, and tap "format dalvik&cache" when install ends.
after that reboot - and system works fine. only bluetooth can crush at the first boot.
Click to expand...
Click to collapse
I'll try and report.
---------- Post added at 08:32 PM ---------- Previous post was at 07:33 PM ----------
Worked. Thanks.

Update on ota updater (update-v3.5-1631.3)

I cannot take any picture in camera is show need sd card... Even i cannot take picture of my screen. Please fix this :'(

Can i install this on K50-T5 (Lenovo K3 Note)?

inouext said:
Can i install this on K50-T5 (Lenovo K3 Note)?
Click to expand...
Click to collapse
I don't think you have read the OP carefully. It clearly says that the Rom is ported FROM the K3 note. Search the relevant thread in xda for your device. It'll be there. Good day.

Pixel Launcher flashable zip

Hey guys,
is there any working flashable zip for the Pixel Launcher?
I am on 3.5.5 and Stock TWRP Recovery.
I dont want to install it via apk as Google now is not working there.
Thank you so much

Use search

I wouldnt have asked if I hadnt searched and tryed flashing some zips before, Sherlock. So either contribute something or ignore this thread.
Maybe there is someone who has 3.5.5 and a flashed Pixel Launcher with working Google Now running?

i was looking for the same, and also didnt get a clear awnser.

Just simply download the .apk, install it. Reboot in recovery (TWRP), mount the system and with the file manager, move /data/app/com.google.android.apps.nexuslauncher to /system/app

Thanks Elpatii. Tried that, unfortunately when I try to move or copy it I get an "process ended with Error: 1" error Did you get it working with that method? Are you rooted?
It seems like system partition is completely locked in CB 3.5.5
Funny thing is I also flashed the Google Dialer from this thread and it writes itself into system partition:
http://forum.xda-developers.com/oneplus-3/how-to/guide-how-to-install-google-dialer-phone-t3443006
I dont know for sure but the dialer zip mounts and unmounts the system partition by itself during flash. I never found a Pixel Launcher zip that does that. Maybe thats the reason?

Elpatii said:
Just simply download the .apk, install it. Reboot in recovery (TWRP), mount the system and with the file manager, move /data/app/com.google.android.apps.nexuslauncher to /system/app
Click to expand...
Click to collapse
This works fine for me. I downloaded the latest APK from APK Mirror, installed it, then using Root Explorer moved it to /system/app. I rebooted and the Google Now swipe works. I'm on 3.5.5 and it goes without saying I'm also rooted

This must work, modded one with transparent dock on 6.0.1, flash it through TWRP

mhhh I tried flashing SuperSu binaries but it didnt make any changes to my system just like the Pixel Launcher zip. Like the flash itself goes well but nothing changes. Neither I get root nor the pixel launcher. 3.5.5 behaving so strange...
I already tried clean flash the phone and using modified 3.02-22
@Tikerz which TWRP are you using at the moment?

airflyer737 said:
mhhh I tried flashing SuperSu binaries but it didnt make any changes to my system just like the Pixel Launcher zip. Like the flash itself goes well but nothing changes. Neither I get root nor the pixel launcher. 3.5.5 behaving so strange...
I already tried clean flash the phone and using modified 3.02-22
@Tikerz which TWRP are you using at the moment?
Click to expand...
Click to collapse
I'm on the lastest -22 TWRP. I just clean flashed 3.5.5. yesterday with SuperSU SR2. Are you sure SuperSU flashed ok? As long as you have root you should be able to just install the APK and move it to /system/app using Root Explorer or other file manager.

Got it working guys. And here is how:
At first I flashed TWRP 3.0.2-22 like @Tikerz said. I deleted SwiftKey in the system app section (basically I just wanted to try if can do anything in system section). I now can move Pixel launcher folder to system/apps. I think because the deleted SwiftKey app gave me some reserved space in the system section. And, flashing it with TWRP also works now!
Thank you all so much for your ideas and hints, I am very happy now with my Pixel experience
@Darkje Have you also found a solution?

@airflyer737, Yeah m8 flashed the zip and All ok.
Now i need the dpi smaller All is really Big ?

ach3fck said:
This must work, modded one with transparent dock on 6.0.1, flash it through TWRP
Click to expand...
Click to collapse
Tganka
---------- Post added at 11:39 PM ---------- Previous post was at 11:34 PM ----------
ach3fck said:
This must work, modded one with transparent dock on 6.0.1, flash it through TWRP
Click to expand...
Click to collapse

ach3fck said:
This must work, modded one with transparent dock on 6.0.1, flash it through TWRP
Click to expand...
Click to collapse
I've been looking for this launcher for very long time
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

Just install Pixel launcher from play store.

panther124 said:
Just install Pixel launcher from play store.
Click to expand...
Click to collapse
Not compatible with my OP3 it says.

bjorg18 said:
Not compatible with my OP3 it says.
Click to expand...
Click to collapse
on every cm13 rom and cm14 rom it is compatible for me. i use this launcher for weeks now.

Does slide to google now work on the play store version??

So just flashing the zip is enough ? No need to install the apk ?

Anyone has the new update?

Oneplus 7T Oxygen OS 10.0.9HD65AA

Hello today i recive vía ota for my 7t HD1905 OS 10.0.9 with security patch 03.2020 and others. 235 MB i remember.
Regards

That's nice, I'm rooted so I have to wait for the full version, I'll report back...

hectorviov said:
That's nice, I'm rooted so I have to wait for the full version, I'll report back...
Click to expand...
Click to collapse
Full version is available on the Oxygen Updater app.

I am on Open Beta 2, updating to 10.0.9 will wipe data?

Ba7rani said:
I am on Open Beta 2, updating to 10.0.9 will wipe data?
Click to expand...
Click to collapse
Have to full wipe if coming from beta.

fossiltkm said:
Have to full wipe if coming from beta.
Click to expand...
Click to collapse
So I can use the updater app to update to the latest version coming from beta 2 but it will wipe data is what you're saying? If so if I'm also rooted will I lose root also?

yellowman82 said:
So I can use the updater app to update to the latest version coming from beta 2 but it will wipe data is what you're saying? If so if I'm also rooted will I lose root also?
Click to expand...
Click to collapse
The oxygen updater will download the full update, then you would update via local update. It will warn you that upon updating, that the device will perform a factory reset once updated. And yes, you will lose root.

fossiltkm said:
The oxygen updater will download the full update, then you would update via local update. It will warn you that upon updating, that the device will perform a factory reset once updated. And yes, you will lose root.
Click to expand...
Click to collapse
Ok thank you very much

So moving from Beta to Stable will wipe data, but not internal storage?

sjancura said:
So moving from Beta to Stable will wipe data, but not internal storage?
Click to expand...
Click to collapse
Like I said in the post above, you have to factory reset if leaving beta going back to stable. Factory Reset wipes the device.

I hope that fix the problem with lost signal.
---------- Post added at 11:27 PM ---------- Previous post was at 10:59 PM ----------
Still the signal lost problem

I have installed this on my 7T HD1905 and after a factory reset i am having issues to complete the android setup, in the built-in app update after clicking agree the android setup application crash and crash and i cant continue careful

bobby0724 said:
I have installed this on my 7T HD1905 and after a factory reset i am having issues to complete the android setup, in the built-in app update after clicking agree the android setup application crash and crash and i cant continue careful
Click to expand...
Click to collapse
I didnt made a factory reset so, the phone reboot and i continue with all my apps
---------- Post added at 01:01 AM ---------- Previous post was at 12:56 AM ----------
I want to know how to do to solve the lost signal in my
HD 1905. If someone know, does need to root and flash a custom rom? Or make something? I tried *#*#4636*#*# and i dont see the radios option too.

Hi. Can someone in 10.0.9 please look in the developer options, if the force dark option is present and can be activated (apply a dark theme to all apps)? This option had been removed from the first two open beta. To find out if it has been put back into official OTA

Any news on EU update?

Android-Desire said:
Any news on EU update?
Click to expand...
Click to collapse
I dont know but...check this
https://forum.xda-developers.com/oneplus-7t/how-to/ota-oxygenos-10-0-7-t4019505

I just updated from 10.0.8 rooted to 10.0.9 no problem.
Uninstalled my subs themes
Downloaded the full version through the updater since im rooted,
Installed, did NOT reboot
Magisk installed in the inactive slot
Rebooted
Profit.

infamousvincci said:
I just updated from 10.0.8 rooted to 10.0.9 no problem.
Uninstalled my subs themes
Downloaded the full version through the updater since im rooted,
Installed, did NOT reboot
Magisk installed in the inactive slot
Rebooted
Profit.
Click to expand...
Click to collapse
With magisk canary 20.4?

Ba7rani said:
I am on Open Beta 2, updating to 10.0.9 will wipe data?
Click to expand...
Click to collapse
sjancura said:
So moving from Beta to Stable will wipe data, but not internal storage?
Click to expand...
Click to collapse
It will wipe everything, including your photos and videos.

infamousvincci said:
I just updated from 10.0.8 rooted to 10.0.9 no problem.
Uninstalled my subs themes
Downloaded the full version through the updater since im rooted,
Installed, did NOT reboot
Magisk installed in the inactive slot
Rebooted
Profit.
Click to expand...
Click to collapse
Are you using the third party oxygen updater app? Did you use automatic or manual install method? Automatic option says it will reboot and manual says "afterward the phone will restart". I don't want it to automatically reboot.