I need the firmware for my unlocked XT1922-9. Is there a website I can go to? I'd like to adb sideload it as the bootloader is locked.
How can your unlocked device have a locked bootloader?
EDIT: How about his?
https://mirrors.lolinet.com/firmware/moto/jeter/official/ATT/
Swift2603 said:
How can you unlocked device have a locked bootloader?
EDIT: How about his?
https://mirrors.lolinet.com/firmware/moto/jeter/official/ATT/
Click to expand...
Click to collapse
I bought the device unlocked from a Target
Jacobgacs said:
I bought the device unlocked from a Target
Click to expand...
Click to collapse
That's even more confusing...
Swift2603 said:
That's even more confusing...
Click to expand...
Click to collapse
This is the about phone section
Jacobgacs said:
This is the about phone section
Click to expand...
Click to collapse
Other screenshot
Swift2603 said:
That's even more confusing...
Click to expand...
Click to collapse
Do you think the AT&T version would work?
As far as I understand the XT-1922-9 is the AT&T version explicitly, so it should work. The linked image files have version OPP27.91-62, yours is OPP27.91-35, so I guess it contains the next security patch already.
Did you try to do a regular software update?
Swift2603 said:
As far as I understand the XT-1922-9 is the AT&T version explicitly, so it should work. The linked image files have version OPP27.91-62, yours is OPP27.91-35, so I guess it contains the next security patch already.
Did you try to do a regular software update?
Click to expand...
Click to collapse
I did.
Swift2603 said:
As far as I understand the XT-1922-9 is the AT&T version explicitly, so it should work. The linked image files have version OPP27.91-62, yours is OPP27.91-35, so I guess it contains the next security patch already.
Did you try to do a regular software update?
Click to expand...
Click to collapse
Although, what is weird is the fact that the phone is "retail." Not "ATT."
Swift2603 said:
As far as I understand the XT-1922-9 is the AT&T version explicitly, so it should work. The linked image files have version OPP27.91-62, yours is OPP27.91-35, so I guess it contains the next security patch already.
Did you try to do a regular software update?
Click to expand...
Click to collapse
Here is the log:
Supported API: 3
-- Install /sdcard/XT1922-9_JETER_ATT_8.0.0_OCP27.91-62_cidl_subsidy-ATT_regulatory-DEFAULT_CFC.xml.zip...
Finding update package...
Opening update package...
Verifying update package...
E: footer is wrong
Update package verification took 0.2 s (result 1).
E: signature verification failed
E: error: 21
Installation aborted.
OK, this is going the wrong way here. What are you trying to do, and why?
Swift2603 said:
OK, this is going the wrong way here. What are you trying to do, and why?
Click to expand...
Click to collapse
I'm trying to get the available update. Turns out all I had to do was turn on airplane mode, clear data and cache for Google services framework, and turn airplane mode off again. I then got updated.
stkpxl said:
1922-9 is the unlocked retail version. I bought mine from Best Buy. Still waiting for this July patch everyone else seems to be getting.
Click to expand...
Click to collapse
Here's what I did:
1. Turn on airplane mode.
2. Clear cache first, then data of Google Services Framework.
3. Turn off airplane mode. Wait a couple of minutes and the update will come through.
stkpxl said:
Tried multiple times. Doesn't work. Even tried clearing data from the Update Services app.
Click to expand...
Click to collapse
It's not a Google update per say but Moto update. Are you rooted?
Sent from my moto g(6) plus using Tapatalk
stkpxl said:
I know. Not rooted. I've checked for updates every day since I bought the phone. Pretty disappointing that even when they do roll out updates, it's still as slow as molasses.
Click to expand...
Click to collapse
That's is odd. What happens when you go to Settings->System->System Updates? A Screenshot of this screen might help.
stkpxl said:
Here it is.
Click to expand...
Click to collapse
Odd, I don't even see that firmware listed in the jeter firmware thread. Not really sure what the problem is but you could always flash the latest firmware yourself if you wanted:
https://forum.xda-developers.com/mo...e-download-t3829122/post77447864#post77447864
Be warned it will wipe out your data so make sure you have a back up!
Swift2603 said:
As far as I understand the XT-1922-9 is the AT&T version explicitly, so it should work. The linked image files have version OPP27.91-62, yours is OPP27.91-35, so I guess it contains the next security patch already.
Did you try to do a regular software update?
Click to expand...
Click to collapse
Not necessarily I bought my Moto G6 Play directly from Motorola Factory Unlocked and its the XT1922-9 RETUS (32gb internal, 3gig RAM) not from ATT or anywhere else
Need Official Moto G6 Play (JETER) Factory Unlocked Version
Jacobgacs said:
I need the firmware for my unlocked XT1922-9. Is there a website I can go to? I'd like to adb sideload it as the bootloader is locked.
Click to expand...
Click to collapse
Looking for official firmare
Device Moto G6 Play
Code JETER
Factory Unlocked version XT1922-9 (not from any company is retail from Motorola)
Been searching all the web but nothing can some one help me out.
Omar04 said:
Looking for official firmare
Device Moto G6 Play
Code JETER
Factory Unlocked version XT1922-9 (not from any company is retail from Motorola)
Been searching all the web but nothing can some one help me out.
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/jeter/official/ try the retail folder. There is xt1922-9 but it's in the att folder so could try that
Related
Took an OTA and now whenever I turn the device on it says in red letters: "Your device is corrupt. It can't be trusted and may not work properly". I can still boot into the OS normally. I can still access fastboot. I can still access recovery. I have done many searches and people keep saying to relock the bootloader or unlock the bootloader and flash stock firmware. There's no way to do either because this Verizon variant is locked down like Fort Knox. I don't understand why the bootloader has to be unlocked to flash STOCK firmware straight from Verizon. Smh. Anyways, does anyone have any ideas. about how to get rid of this message?
ClassickWORLD said:
Took an OTA and now whenever I turn the device on it says in red letters: "Your device is corrupt. It can't be trusted and may not work properly". I can still boot into the OS normally. I can still access fastboot. I can still access recovery. I have done many searches and people keep saying to relock the bootloader or unlock the bootloader and flash stock firmware. There's no way to do either because this Verizon variant is locked down like Fort Knox. I don't understand why the bootloader has to be unlocked to flash STOCK firmware straight from Verizon. Smh. Anyways, does anyone have any ideas. about how to get rid of this message?
Click to expand...
Click to collapse
You could side load the Google OTA image and see if that fixes it. Or just wait until next week and see if the March OTA fixes it. If your device is working properly, I wouldn't worry too much about it.
Badger50 said:
You could side load the Google OTA image and see if that fixes it. Or just wait until next week and see if the March OTA fixes it. If your device is working properly, I wouldn't worry too much about it.
Click to expand...
Click to collapse
I have moved on to the iPhone 8 Plus. I sold the device and had it returned because of that message... and now I want to sell it again. I just need to get rid of it. So you are saying that I can sideload via adb even on a Verizon device with a locked bootloader?
ClassickWORLD said:
I have moved on to the iPhone 8 Plus. I sold the device and had it returned because of that message... and now I want to sell it again. I just need to get rid of it. So you are saying that I can sideload via adb even on a Verizon device with a locked bootloader?
Click to expand...
Click to collapse
While I haven't done it personally, I've seen several people do just that from stock recovery. At worst, the install will fail and nothing will be changed. Unlocking the bootloader is mainly for flashing factory images and rooting, not OTA's. Just follow the instructions from Google and see what happens. In your current situation, you really have nothing to lose.
https://developers.google.com/android/ota
ClassickWORLD said:
I have moved on to the iPhone 8 Plus. I sold the device and had it returned because of that message... and now I want to sell it again. I just need to get rid of it. So you are saying that I can sideload via adb even on a Verizon device with a locked bootloader?
Click to expand...
Click to collapse
Yes, I have a Verizon version of the Pix2-XL, and I have run 4 or 5 times on it.
https://developers.google.com/android/ota
Use these instructions exactly, and be sure you have the newest Android Tools.
This should take care of your error message.
michaelbsheldon said:
Yes, I have a Verizon version of the Pix2-XL, and I have run 4 or 5 times on it.
https://developers.google.com/android/ota
Use these instructions exactly, and be sure you have the newest Android Tools.
This should take care of your error message.
Click to expand...
Click to collapse
Thanks for the conformation my friend. I kinda feel sorry for that poor guy, he went to an iphone!!.....oh the horror! ??????
michaelbsheldon said:
Yes, I have a Verizon version of the Pix2-XL, and I have run 4 or 5 times on it.
https://developers.google.com/android/ota
Use these instructions exactly, and be sure you have the newest Android Tools.
This should take care of your error message.
Click to expand...
Click to collapse
Hey thanks for that. The latest image I see for the Verizon Pixel XL 2 is for 8.0.0 from Nov 2017. I am on 8.1. So I have to downgrade? Is that even possible?
ClassickWORLD said:
Hey thanks for that. The latest image I see for the Verizon Pixel XL 2 is for 8.0.0 from Nov 2017. I am on 8.1. So I have to downgrade? Is that even possible?
Click to expand...
Click to collapse
Huh?? You have a P2XL right?? It's right there at the bottom of the P2XL section.
What build month are you currently on?
ClassickWORLD said:
Hey thanks for that. The latest image I see for the Verizon Pixel XL 2 is for 8.0.0 from Nov 2017. I am on 8.1. So I have to downgrade? Is that even possible?
Click to expand...
Click to collapse
You do want the February one. It's for all phones including Verizon.
Badger50 said:
Huh?? You have a P2XL right?? It's right there at the bottom of the P2XL section.
What build month are you currently on?
Click to expand...
Click to collapse
So I can flash that with no radio issues? I thought OPM1 is google, OPM2 is Telus only, and OPD3 is Verizon only? I have a Verizon P2XL
Edit: I think I've found my issue. The person who had the device before me must have sideloaded 8.1.0 (OPM1.171019.018, Feb 2018)" to this device and that may be the reason for the error. I am thinking because that's not the Verizon P2XL firmware but the Google P2XL device firmware.
michaelbsheldon said:
You do want the February one. It's for all phones including Verizon.
Click to expand...
Click to collapse
Ok gotcha. Downloading now as we speak.
Badger50 said:
Thanks for the conformation my friend. I kinda feel sorry for that poor guy, he went to an iphone!!.....oh the horror! ??
Click to expand...
Click to collapse
Lol I still have my trusty ol' Nexus 6P as my secondary device.
WoW this download link is really slow. Downloading at 50 KB/s. Says 9 hours left. I have fiber speeds for my internet. Anyone know of any alternative download locations for this OTA?
Edit: Rebooted my router and that fixed it. It downloaded in 2 minutes.
ClassickWORLD said:
WoW this download link is really slow. Downloading at 50 KB/s. Says 9 hours left. I have fiber speeds for my internet. Anyone know of any alternative download locations for this OTA?
Edit: Rebooted my router and that fixed it. It downloaded in 2 minutes.
Click to expand...
Click to collapse
Fixed and you're a happy camper, right?
P.S. try a factory reset to complete this
You guys are great. The sideload fixed the problem! I truly appreciate you guys. Thanks a lot.
ClassickWORLD said:
Lol I still have my trusty ol' Nexus 6P as my secondary device.
Click to expand...
Click to collapse
Ok bruh, your forgiven :laugh: Did you get your problem fixed?
Oooops....never mind. I see that you did :good:
Is this the method for unlocking a Verizon Pixel 2 XL? Or just to fix the message this person was receiving. I want to buy a verizon Pixel 2 XL today in the store and do this vs waiting on google to deliver it.
tradermatt said:
Is this the method for unlocking a Verizon Pixel 2 XL? Or just to fix the message this person was receiving. I want to buy a verizon Pixel 2 XL today in the store and do this vs waiting on google to deliver it.
Click to expand...
Click to collapse
There is no method to unlock the Verizon P2XL!!
Here is Stock Oreo directly from Samsung for the Samsung Galaxy S7 Unlocked Varient via Odin.
AP_G930UUEU4CRG2_CL13710148_QB18808851_REV02_user_ low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU4CRG2_CL13710148_QB18808851_REV02_user_ low_ship_MULTI_CERT.tar.md5
CP_G930UUEU4CRG2_CP10090194_CL13710148_QB18808851_ REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM4CRG2_CL13710148_QB18808851_REV02_ user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM4CRG2_CL13710148_QB18808851_R EV02_user_low_ship_MULTI_CERT.tar.md5
Link: https://drive.google.com/open?id=1JDcHy6M7rmdoPsXM62Q3KNaoZ6DlAZb5
Don't forget to factory reset and clear the caches via Recovery after you flash.
Enjoy!
Phone performance after oreo rom update
Please share your experiences of s7 after updating to android oreo through this rom.
mjbajwa said:
Please share your experiences of s7 after updating to android oreo through this rom.
Click to expand...
Click to collapse
Zero problems. Zero bloatware. Volte and wifi calling works.
aarongotgame said:
Zero problems. Zero bloatware. Volte and wifi calling works.
Click to expand...
Click to collapse
How about the battery drain issue that affected the S7 on some networks since the 2nd Oreo update last month?
See this thread on the samsung forum: https://eu.community.samsung.com/t5/Smartphones-Tablets-Wearables/Cell-Standby-Android-System-Google-Play-Services-battery-drain/td-p/547434/page/59
Robotson said:
How about the battery drain issue that affected the S7 on some networks since the 2nd Oreo update last month?
See this thread on the samsung forum: https://eu.community.samsung.com/t5/Smartphones-Tablets-Wearables/Cell-Standby-Android-System-Google-Play-Services-battery-drain/td-p/547434/page/59
Click to expand...
Click to collapse
Not sure, I just charge my phone when needed. I've never had an update or ota notification. I flashed this rom thirty minutes after it was officially released and I've been using it ever since with no problems. I'm still on CRG2 and I don't see this second Oreo update for the 930u
aarongotgame said:
Not sure, I just charge my phone when needed. I've never had an update or ota notification. I flashed this rom thirty minutes after it was officially released and I've been using it ever since with no problems. I'm still on CRG2 and I don't see this second Oreo update for the 930u
Click to expand...
Click to collapse
Oh right ok. So when was this ROM released by Samsung?
Robotson said:
Oh right ok. So when was this ROM released by Samsung?
Click to expand...
Click to collapse
The same day I uploaded it to xda
I bought a Galaxy S7 from this scammer on craigslist. It won't boot and was showing "an error has occurred while updating the device software". I did volume down+power+home buttons and it comes back to recovery mode. I selected factory reset and few other options, I just get "failed to mount /system (Invalid argument )" message. Can someone please help resolve this issue? I believe I need to flash with factory image but I don't know the history of this phone. I'd really appreciate some help.
Thanks.
kimbhoot said:
I bought a Galaxy S7 from this scammer on craigslist. It won't boot and was showing "an error has occurred while updating the device software". I did volume down+power+home buttons and it comes back to recovery mode. I selected factory reset and few other options, I just get "failed to mount /system (Invalid argument )" message. Can someone please help resolve this issue? I believe I need to flash with factory image but I don't know the history of this phone. I'd really appreciate some help.
Thanks.
Click to expand...
Click to collapse
Go to download mode and try to reinstall the firmware if you can
kimbhoot said:
I bought a Galaxy S7 from this scammer on craigslist. It won't boot and was showing "an error has occurred while updating the device software". I did volume down+power+home buttons and it comes back to recovery mode. I selected factory reset and few other options, I just get "failed to mount /system (Invalid argument )" message. Can someone please help resolve this issue? I believe I need to flash with factory image but I don't know the history of this phone. I'd really appreciate some help.
Thanks.
Click to expand...
Click to collapse
Just flash s7 firmware. Nougat or Oreo will work. None of that other stuff matters.
can you flash this by twrp ??
Does it work for G930V and G930
Does it work for G930V and G930
freecore.minecraft said:
Does it work for G930V and G930
Click to expand...
Click to collapse
This is the unlocked 930u firmware. 930v is Verizon. Flash it and find out. The 930 is the phone itself. Not quite sure what you mean by the 930. Thinking maybe u mean 935v which is the s7 edge
aarongotgame said:
This is the unlocked 930u firmware. 930v is Verizon. Flash it and find out. The 930 is the phone itself. Not quite sure what you mean by the 930. Thinking maybe u mean 935v which is the s7 edge
Click to expand...
Click to collapse
It says theyre unlocked, and I can install a 930u custom rom if it works?
freecore.minecraft said:
It says theyre unlocked, and I can install a 930u custom rom if it works?
Click to expand...
Click to collapse
Yes
Secure Folder
Secure Folder, Samsung Health will work on this firmware?
r.prvnraj said:
Secure Folder, Samsung Health will work on this firmware?
Click to expand...
Click to collapse
Why wouldn't it? This is official Samsung firmware
aarongotgame said:
Just flash s7 firmware. Nougat or Oreo will work. None of that other stuff matters.
Click to expand...
Click to collapse
Thanks for your response. I found some video that explains how to bypass google lock (FRP Bypass). I had to load a combination firmware that allowed me to change the setting and enable developer mode. after that, I loaded firmware for this phone but it's in a reboot cycle. phone boots up fully, welcome screen, I start setting up the phone and BAM.. it reboots and that viscous cycle repeats.
Please advise.
kimbhoot said:
Thanks for your response. I found some video that explains how to bypass google lock (FRP Bypass). I had to load a combination firmware that allowed me to change the setting and enable developer mode. after that, I loaded firmware for this phone but it's in a reboot cycle. phone boots up fully, welcome screen, I start setting up the phone and BAM.. it reboots and that viscous cycle repeats.
Please advise.
Click to expand...
Click to collapse
Might need to attempt a reflash. Before that go into recovery and wipe n clear caches then do a factory reset
aarongotgame said:
This is the unlocked 930u firmware. 930v is Verizon. Flash it and find out. The 930 is the phone itself. Not quite sure what you mean by the 930. Thinking maybe u mean 935v which is the s7 edge
Click to expand...
Click to collapse
Can unlock 930u edition 930 T-Mobile ?
in a Brazilian community many people have received an update and it is the soak test of Android pie
Can someone capture?
please
This photo is from the community, not mine.
https://photos.app.goo.gl/KUUUkmaEtGDknhCW9
https://photos.app.goo.gl/NPqNwr5AkEFDfwzJ8
Brunolav1 said:
in a Brazilian community many people have received an update and it is the soak test of Android pie
Can someone capture?
please
This photo is from the community, not mine.
https://photos.app.goo.gl/KUUUkmaEtGDknhCW9
https://photos.app.goo.gl/NPqNwr5AkEFDfwzJ8
Click to expand...
Click to collapse
I've been hunting for this since last night. If I find it, I will link it here. Have you found any more info about it?
unfortunately I only found these images in the community
Spaceminer said:
I've been hunting for this since last night. If I find it, I will link it here. Have you found any more info about it?
Click to expand...
Click to collapse
Pie Soak Test!
I found it! Please mirror.
ui_print("Target: motorola/aljeter/aljeter:9/PPP29.41/b1fe5:user/release-keys");
Download
As far as I know, you must be on the Sept. patch. So, you must downgrade firmware first. It also appears to be for the Aljeter only, so I don't know if it'll work on the Jeter.
These installation steps need confirmation. I am not responsible for any bricked devices.
1. Downgrade to OPP27.91-143 first.
2. Extract gpt_main0.bin from the ota zip and flash it in fastboot.
fastboot flash partition gpt_main0.bin
3. Reboot to recovery, and apply the OTA update from your sdcard.
4. Let the system restart. It'll take about 10min.
works just fine. followed the instructions exactly and I'm on Pie now. and already loving it. one thing: at the update checking screen, it says my device is no more ellegible for updstes...
---------- Post added at 03:35 AM ---------- Previous post was at 03:01 AM ----------
adding: this is a massive upgrade, hell yeah, I like my phone even more now. it's nice that motorola is really bringing it.
@blowingoff What model are you running? Jeter or aljeter? Assuming aljeter?
techboy11 said:
@blowingoff What model are you running? Jeter or aljeter? Assuming aljeter?
Click to expand...
Click to collapse
I never know the difference. I know it is XT1922-5.
techboy11 said:
@blowingoff What model are you running? Jeter or aljeter? Assuming aljeter?
Click to expand...
Click to collapse
I'm on the Jeter and I can't install it. (xt1922-7) The bootloader rejects the gpt file, which is needed to expand the recovery partition. I'm still searching for Jeter specific firmware.
---------- Post added at 03:06 PM ---------- Previous post was at 03:03 PM ----------
blowingoff said:
I never know the difference. I know it is XT1922-5.
Click to expand...
Click to collapse
I feel the same way even when I do know. Motorola did their best to make it as confusing as humanly possible.
so as you are in Jeter and can't do the update, I suppose mine is aljeter. right?
blowingoff said:
so as you are in Jeter and can't do the update, I suppose mine is aljeter. right?
Click to expand...
Click to collapse
Yes, from the looks of it that would be the case. I have Jeter and am having the same issue with the bootloader rejecting the gpt file.
blowingoff said:
so as you are in Jeter and can't do the update, I suppose mine is aljeter. right?
Click to expand...
Click to collapse
Yes, that should be correct. I think it's both country and carrier dependent. I'm in the US on Virgin Mobile. I know that I can flash any xt1922-x firmware except things related to the bootloader. Those must be Sprint branded or they fail. I can't get Sahara to run on windows 10, otherwise I think I could make them flash anyways.
In my case, I can give a flash in GPT, but when I install update via recovery the following error is displayed:
E: Failed to verify whole-file signature update package verification.
E: Signature verification failed
E: Error: 21
PS: JETER XT1922-5.
wmosquini said:
In my case, I can give a flash in GPT, but when I install update via recovery the following error is displayed:
E: Failed to verify whole-file signature update package verification.
E: Signature verification failed
E: Error: 21
PS: JETER XT1922-5.
Click to expand...
Click to collapse
did you get back to september security patch?
blowingoff said:
did you get back to september security patch?
Click to expand...
Click to collapse
I had to downgrade to the OPP27.91-143, my device was in OPP27.91-177 (December patch).
In the attached image you have the version print.
wmosquini said:
I had to downgrade to the OPP27.91-143, my device was in OPP27.91-177 (December patch).
In the attached image you have the version print.
Click to expand...
Click to collapse
so you probably should download the file again or even put it to ur sd card again.
blowingoff said:
so you probably should download the file again or even put it to ur sd card again.
Click to expand...
Click to collapse
I downloaded it again and now I succeeded!
It worked at G6 Play Brasil! Good!
Can anyone share a backup of the September security patch? I got my phone in December so I couldn't get a backup.
wmosquini said:
I had to downgrade to the OPP27.91-143, my device was in OPP27.91-177 (December patch).
In the attached image you have the version print.
Click to expand...
Click to collapse
wmosquini said:
I downloaded it again and now I succeeded!
It worked at G6 Play Brasil! Good!
Click to expand...
Click to collapse
hm... the Home button is a little bit different on mine, what the heck?
blowingoff said:
hm... the Home button is a little bit different on mine, what the heck?
Click to expand...
Click to collapse
good question rsrs
I have error code 7 when i try to apply the update from sd card via twrp.
This time it's the real deal and not a beta/mfn version.
The update comes bundled with the January 2020 Security Patch and has the build number QSA30.62-24
As usual, the update is rolling out in batches... As by far, only users of the first batch of devices have received the OTA update.
The other batches (02/2019 and so on...) are still waiting in line.
My phone's batch is 06/2019... So I'll have to wait a little more
EDIT: As Of Today, January 13 2020, the OTA update, versioned QSA30.62-24 is out for All Users of the Motorola One Vision In Brazil using the Retail Software Channel (RETBR).
I just updated my phone and did a hard reset to start clean.
how do you know which batch is your phone?
BRZ_Speedster said:
This time it's the real deal and not a beta/mfn version.
The update comes bundled with the January 2020 Security Patch and has the build number QSA30.62-24
As usual, the update is rolling out in batches... As by far, only users of the first batch of devices have received the OTA update.
The other batches (02/2019 and so on...) are still waiting in line.
My phone's batch is 06/2019... So I'll have to wait a little more
Click to expand...
Click to collapse
How can I know my device's batch?
SnoopDoge said:
how do you know which batch is your phone?
Click to expand...
Click to collapse
Look at the decal on the side of the box, which shows the IMEI numbers... Below there is a text saying "Date:" -- The following number after "Date" is your phone's batch number.
Is it not possible now to somehow download it an apply it yourself manually for your phone?
Nicofisi said:
Is it not possible now to somehow download it an apply it yourself manually for your phone?
Click to expand...
Click to collapse
It is, but someone would have to capture the OTA Zip file first and upload it on the web.
Hope someone here does
BRZ_Speedster said:
It is, but someone would have to capture the OTA Zip file first and upload it on the web.
Click to expand...
Click to collapse
just as i wrote on motorola forums:
i just found the zip can be downloaded with Lenovo Moto Smart Assistant PC companion program on a Flash tab, it's unfortunately unavailable for me though, just a tip for those with update available
Click to expand...
Click to collapse
then you can just sideload like this, haven't tried that though
Fastboot rom is out for retbr.
Gonna flash it to my reteu xt1970-3 later tonight in wait for reteu rom.
tys0n said:
Fastboot rom is out for retbr.
Gonna flash it to my reteu xt1970-3 later tonight in wait for reteu rom.
Click to expand...
Click to collapse
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
Where did you download it from?
Aaronnelhams said:
Where did you download it from?
Click to expand...
Click to collapse
From Lolinet's mirror. However I tried opening it in RSD Lite. No Go. Gives an error.
Image seems to be corrupt. Luckily I didn't do anything to my phone.
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
BRZ_Speedster said:
From Lolinet's mirror. However I tried opening it in RSD Lite. No Go. Gives an error.
Image seems to be corrupt. Luckily I didn't do anything to my phone.
Click to expand...
Click to collapse
Did you try redownloading it? Would you be able to send the mirror link as I couldn't get the website to even find an update for me
Aaronnelhams said:
Did you try redownloading it? Would you be able to send the mirror link as I couldn't get the website to even find an update for me
Click to expand...
Click to collapse
Yes I downloaded it a second time. Both times RSD gave an error.
https://mirrors.lolinet.com/firmware/moto/kane/official/RETBR/ -- Mirror Link
Its the last file there.
But I do advise caution.
BRZ_Speedster said:
Yes I downloaded it a second time. Both times RSD gave an error.
https://mirrors.lolinet.com/firmware/moto/kane/official/RETBR/ -- Mirror Link
Its the last file there.
But I do advise caution.
Click to expand...
Click to collapse
If the file were fine because I have the xt1970-3 will that cause any issues? I don't wanna flash it if it kills my device, even if I can return it
Aaronnelhams said:
If the file were fine because I have the xt1970-3 will that cause any issues? I don't wanna flash it if it kills my device, even if I can return it
Click to expand...
Click to collapse
Do not try flashing this. It WILL brick your phone!
BRZ_Speedster said:
Do not try flashing this. It WILL brick your phone!
Click to expand...
Click to collapse
Alright thanks, how long do you reckon it'll take before the XT1970-3 will get the update anywhere so it could be flashed?
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
So did you make it work? I'm willing to do that but I'm afraid of bricking my phone
BRZ_Speedster said:
Do not try flashing this. It WILL brick your phone!
Click to expand...
Click to collapse
That's wrong. I've flashed retbr and retin to my xt1970-3 without problems.
Bootloader unlocked though.
Now I've just updated to A10 and I can say that I got it rooted with same method as on pie, so twrp and magisk still works.
tys0n said:
That's wrong. I've flashed retbr and retin to my xt1970-3 without problems.
Bootloader unlocked though.
Now I've just updated to A10 and I can say that I got it rooted with same method as on pie, so twrp and magisk still works.
Click to expand...
Click to collapse
Did you download it with the link that was mentioned above?, what actually is the difference between the -1 and the -3 models of motorola one vision? And what method did you use to install it?
Aaronnelhams said:
Did you download it with the link that was mentioned above?, what actually is the difference between the -1 and the -3 models of motorola one vision? And what method did you use to install it?
Click to expand...
Click to collapse
Yes I used the same file. Flashed it with fastboot.
Differences betweeen the models is modem. They have a bit different support for bands.
Motorola One Vision XT1970-3 vs Motorola One Vision XT1970-1
I recently bought an AT&T G8 on eBay and no matter what I try, I can't update it. It's still on the factory update. I've had an activated AT&T SIM in it for several days, tried using other SIMs, factory resetting a few times, but I still get the same error that says it can't update or there's just no update. I've tried calling tech support there and going into a store, but they were out of ideas too. Does anyone have a link to any update to try installing or any ideas for how to get it to update?
calxk713 said:
I recently bought an AT&T G8 on eBay and no matter what I try, I can't update it. It's still on the factory update. I've had an activated AT&T SIM in it for several days, tried using other SIMs, factory resetting a few times, but I still get the same error that says it can't update or there's just no update. I've tried calling tech support there and going into a store, but they were out of ideas too. Does anyone have a link to any update to try installing or any ideas for how to get it to update?
Click to expand...
Click to collapse
from which country do you come from?
rmato said:
from which country do you come from?
Click to expand...
Click to collapse
I'm in the US
calxk713 said:
I recently bought an AT&T G8 on eBay and no matter what I try, I can't update it. It's still on the factory update. I've had an activated AT&T SIM in it for several days, tried using other SIMs, factory resetting a few times, but I still get the same error that says it can't update or there's just no update. I've tried calling tech support there and going into a store, but they were out of ideas too. Does anyone have a link to any update to try installing or any ideas for how to get it to update?
Click to expand...
Click to collapse
Try LG Bridge. I had an update that stalled and then wouldn't offer me it again, connected to LG Bridge and poof done.
Install Android 10 manually with lgup. Flash android 10 kdz
trouble. said:
Install Android 10 manually with lgup. Flash android 10 kdz
Click to expand...
Click to collapse
This works on the g8? Given the lack of options we have with being able to recover the device I really don't want to brick.
p3tr0s said:
This works on the g8? Given the lack of options we have with being able to recover the device I really don't want to brick.
Click to expand...
Click to collapse
Yeah it works
p3tr0s said:
This works on the g8? Given the lack of options we have with being able to recover the device I really don't want to brick.
Click to expand...
Click to collapse
It will not brick your phone. It's very simple. Get the kdz for your at&t model. Install a dev patched lgup and flash.
trouble. said:
It will not brick your phone. It's very simple. Get the kdz for your at&t model. Install a dev patched lgup and flash.
Click to expand...
Click to collapse
Not to a complete noob here, I've been out of the flashing game for a while but I haven't been successful in finding any online images for the at&t model. Any tips on finding one?
p3tr0s said:
Not to a complete noob here, I've been out of the flashing game for a while but I haven't been successful in finding any online images for the at&t model. Any tips on finding one?
Click to expand...
Click to collapse
What's your model number and where do u live?
trouble. said:
What's your model number and where do u live?
Click to expand...
Click to collapse
LM-G820UM it's the at&t model in the United States.
p3tr0s said:
LM-G820UM it's the at&t model in the United States.
Click to expand...
Click to collapse
https://lg-firmwares.com/downloads-file/21864/G820UM20b_00_USC_US_OP_0110
There u go.
trouble. said:
https://lg-firmwares.com/downloads-file/21864/G820UM20b_00_USC_US_OP_0110
There u go.
Click to expand...
Click to collapse
That's not it. I think at&t doesn't publish kdzs.i have the same issue with Sprint
antintin said:
That's not it. I think at&t doesn't publish kdzs.i have the same issue with Sprint
Click to expand...
Click to collapse
That's my understanding as well. I'm getting the run around from at&t, cricket, and LG with them pointing the finger at each other playing the blame game. Seriously annoying... The G8 is a beast but if it's like this I might just stick with my pixel 3a. I appreciate the info though from everyone.
antintin said:
That's not it. I think at&t doesn't publish kdzs.i have the same issue with Sprint
Click to expand...
Click to collapse
It is! It's the same model kdz. How can u say that's not it?
trouble. said:
It is! It's the same model kdz. How can u say that's not it?
Click to expand...
Click to collapse
That's the us open
so has anyone flashed this firmware manually via LGUP to their AT&T g8 and was successful? does everything get wiped?
So I've bought a couple of these att LG g8. The problem was that I am on cricket so no updates. This has been a fool proof way I've found to get the updates moving.
I put in an activated (I didn't add any money to my att account) att sim, 10 bucks from Walmart. I issue a factory reset and skip all setup (except connecting to WiFi). Check update as soon as I am through setup. If it works great ,if not repeat. It's worked on 3 phones so far.
geminihc said:
so has anyone flashed this firmware manually via LGUP to their AT&T g8 and was successful? does everything get wiped?
Click to expand...
Click to collapse
No cross flash is not possible...
trouble. said:
Install Android 10 manually with lgup. Flash android 10 kdz
Click to expand...
Click to collapse
Do you have the KDZ link?